• Developing detailed designs.
• Doing feasibility assessments and site inspections.
• Preparing and implementing project plans.
• Researching and providing estimates for projects.
• Reviewing government regulations and ordinances.
• Monitoring and optimizing safety procedures, production processes, and regulatory compliance.
• Making recommendations or presenting alternative solutions to problems.
• Confidently liaising with clients and other professional subcontractors.
• Project management duties (e.g. managing budgets, resources, and deadlines; acquiring and compiling quotes, etc.).

Production Engineer

Our client is a MNC chemical manufacturer company. They are currently seeking for Production Engineer to improve the production technology of the site.

The role of the Production Engineer includes:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint.
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization.
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.

Job Requirement:

·       Bachelor’s degree in science, technology, or engineering.

·       Minimum five (5) years of relevant engineering/production work experience in chemical industry.

·       Experience in designing or optimizing the process control system of chemical plants.

·       Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).

·       Knowledge of mass and heat balance calculations of chemical plants.

·       Demonstrated skill to in leadership, developing others, and working in a teambased environment.

·       Outstanding verbal and written communication, presentation, interpersonal, creative thinking, consulting, and analytical skills.

·       Excellent communication skills.

·       Ability to prioritize work to manage multiple projects to meet deadlines.

·       Excellent problem-solving/decision-making skills.

·       Ability to multi-task.

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to improper submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

• At least 5 years working experience

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Requirement:

• Technical Expertise: Proficient in managing Windows servers (2019, 2022), Active Directory, DNS, DHCP, and Exchange (2019 and online); skilled in VMware vSphere (8.x), ESXi, and server hardware management (Dell, Lenovo).
• System Administration: Responsible for routine administration tasks, including server monitoring, troubleshooting, patch management, and vulnerability assessments in a Windows Active Directory environment.
• Documentation & Training: Produce and maintain documentation for server configurations and processes; provide training and technical support to L1 engineers.
• On-Call Support: Participate in an on-call rotation for 24/7 coverage of critical systems and issues, ensuring efficient resolution of customer problems.
• Project Implementation: Experience in enterprise-level project implementation and support; must possess strong problem-solving and communication skills.
• Qualifications: Minimum 2-4 years of relevant experience and a Professional Certificate, Diploma, or higher in Computer/Telecommunication Engineering or equivalent.

• Provide assistance for the installation and commissioning of any Gas Chromatography, System and Solutions.
• Carry out service calls on a preventative and reactive basis as required, undertaking service and repair of products and systems to deliver against customers’ requirements.
• Keep accurate records regarding job progress, delays, problems, deliveries, changes, extras, and engineering and fabrication errors.
• Report back on the completed projects outlining the activities carried out, faults found during service and any future recommendations for improving the service offering.
• Train customer staff in methods to maintain and repair the equipment, to ensure knowledge is transferred.
• Conduct audits at customer sites to record and analyze process improvement opportunities.
• Works independently to complete given assignments, carrying out day-to-day servicing activities.
• Analyses and improves current ways of working and service delivery.
• May guide others within own area of expertise.

Qualification

• Degree in Chemical Engineering or equivalent
• At least 5 years experience in Process Analyzer Product
• Frequent travel is required

- Determining project requirements

- Putting together project teams

- Obtaining materials needed for the project

- Monitoring and maintaining standards and quality output

- Liaising with contractors, stakeholders and suppliers

- Leading the implementation of safety processes

- Identifying project issues and implementing corrective measures.

- Documenting and reporting the progress of the project

The Automation Engineer is responsible for designing, implementing, and maintaining automated systems in the biopharmaceutical manufacturing environment. This role involves working at the intersection of engineering, technology, and biopharmaceutical processes, ensuring the efficient and compliant operation of automated equipment and systems.

RESPONSIBILITIES

System Design and Implementation

• Design and develop automation solutions for various Biopharma manufacturing processes, including production, packaging, and quality control.
• Collaborate with cross-functional teams to understand requirements and translate them into technical specifications.
• Select appropriate hardware and software components to achieve automation objectives.
• Oversee the installation and commissioning of automation systems, ensuring adherence to project timelines and budgets.

Maintenance and Optimization

• Monitor and maintain automated systems to ensure uninterrupted operation.
• Troubleshoot technical issues and implement corrective actions to minimize downtime.
• Conduct routine inspections and preventive maintenance activities to prolong equipment lifespan and enhance reliability.
• Identify opportunities for automation optimization and efficiency improvements.
• Provide technical guidance to automation technicians. Ensure the training records are kept up to date.
• Manage the cybersecurity requirements and work closely with IT team to implement a safe working environment free from cyber threats.

Regulatory Compliance

• Ensure that automation solutions comply with regulatory requirements, GMP (Good Manufacturing Practice) standards, and other relevant regulations.
• Participate in validation activities, including IQ/OQ/PQ (Installation Qualification/Operational Qualification/Performance Qualification) protocols and documentation.
• Keep up with of industry trends and regulatory updates to proactively address compliance issues.

Risk Management and Quality Assurance

• Conduct risk assessments of automated systems to identify potential hazards and implement risk mitigation strategies.
• Support quality assurance efforts by ensuring that automation processes meet specified quality standards.
• Investigate deviations or non-conformances related to automation systems and implement corrective and preventive actions.

Continuous Improvement

• Drive continuous improvement initiatives to enhance automation capabilities, efficiency, and cost-effectiveness.
• Collaborate with stakeholders to identify areas for process optimization and automation enhancements.
• Implement best practices and innovative technologies to stay at the forefront of automation in biopharmaceutical manufacturing.

REQUIREMENTS

• Bachelor’s or master’s degree in engineering (e.g., Electrical, Mechanical, Chemical, or Biomedical Engineering) or related field.
• Experience in automation engineering, preferably within the biopharmaceutical or pharmaceutical industry.
• Adept knowledge of automation technologies, including PLCs, SCADA systems, software, Data warehouse like OSIPI and industrial networking protocols. Siemens PCS7
• Familiarity with regulatory requirements and standards governing biopharmaceutical manufacturing processes.
• Experience with test protocols and executions eg. IQ/OQ/PQ, test scripts with relevant key deliverables such as plan, report, deviation, change control and industry best practices etc.
• Experience in start-ups, commissioning & qualification (CSV) of Automation and process control systems.
• Knowledge of GAMP software development lifecycle, ANSI/ISA-S88 and S95 industry standards
• Excellent problem-solving skills and ability to troubleshoot complex technical issues.
• Effective communication and teamwork abilities, with the capacity to collaborate with cross-functional teams.
• Attention to detail and commitment to safety, quality and compliance.

Reg No.: R2090579

EA License No.: 02C3423

Manpower Singapore

Lim Pey Chyi (Apple) - [email protected]

Responsibilities:

• Install, test, commission, and conduct preventive and corrective maintenance (PM & CM) on healthcare equipment/systems.

• Address and resolve recurring issues promptly to ensure consistent customer satisfaction.

• Plan and schedule PM or CM tasks efficiently.

• Provide post-sales support as needed.

• Coordinate with manufacturers, vendors, contractors, and clients for project management.

• Assist the project team in executing projects smoothly.

• Respond promptly to service calls.

• Collaborate with team members to gather feedback and identify prospects.

• Undertake any additional tasks as assigned.

Requirements:

• NITEC/Diploma in Electrical/Electronic/Biomedical Engineering or equivalent.

• Proficient in using software-assisted technical service diagnostic and testing equipment.

• Minimum of 2-3 years' relevant experience preferred; fresh graduates with a keen learning attitude are encouraged to apply.

• Strong interpersonal skills and customer service orientation.

• Good command of English and familiarity with Microsoft Office and IT tools.

• Self-motivated, diligent, and reliable.

• Possession of a valid driving license is advantageous.

• Able to work independently as well as part of a team.

• Fluent in both spoken and written English.

Job Scope

1) Site Survey, planning and proposed routing

2) Preparation and submission of doucment to authorities

3) Liasing with authorities, clients representatives, sub-contractor and consultants.

4) To assist project manager on the day-to-day management of site, including supervising and monitoring the site labour force and the work of any subcontractor.

Requirement

1) Diploma in Engineering ( Civil / Electrical preferred)

2) More than 3 year Experience preferred

3) Good oral and written communication skills in English.

4) Good team player.

5) Own transport preferred

6) Knowledge of CAD is advantage

Job Scope

1) Site Survey, planning and proposed routing

2) Preparation and submission of doucment to authorities

3) Liasing with authorities, clients representatives, sub-contractor and consultants.

4) To assist project manager on the day-to-day management of site, including supervising and monitoring the site labour force and the work of any subcontractor.

Requirement

1) Degree in Engineering ( Civil / Electrical preferred)

2) More than 3 year Experience preferred

3) Good oral and written communication skills in English.

4) Good team player.

5) Own transport preferred

6) Knowledge of CAD is advantage

Job Description

Key Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.
• Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.
• Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.
• Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Requirements

• Min 3 years of experiences as Manufacturing Engineer in semiconductor/ electronics or engineering industries
• Relevant Engineering qualifications
• Able to work with any levels of stakeholders globally
• Able to attend global meetings of different time zones
• Project management experiences would be an added advantage
• Microsoft excel and Tableau

Work Location

• 8 Upper Changi Road (Bus 2, 5, 37)
• No company transport available

The Role:

In this position, you will provide first-level on-site support for end-user operations within the organization. You’ll be responsible for understanding and managing complex technical issues in a fast-paced business environment. Your key tasks will include maintaining, managing, administering, and operating VMware vSphere and VMware Horizon VDI environments and applications. You will perform daily administrative tasks such as maintenance, upgrades, patches, hotfixes, and security configurations for these environments. Monitoring, alerting, and fine-tuning the VDI environments will also be crucial.

Additionally, you will assess risks associated with virtual machines and VDI applications, conducting contingency planning as needed. Troubleshooting VMware workloads and assisting in the evaluation and recommendation of related hardware, software, and services will be part of your responsibilities. Staying current with developments in virtual machine technologies and providing on-call, 24/7 support on a rotating basis is essential. You will implement corrective measures to resolve production issues and minimize unplanned outages. Creating and maintaining technical documentation will ensure efficient planning and execution, while you will also coordinate with external parties for problem resolution and support special projects as required. Furthermore, you may lead the post-delivery team to manage inventory and maintenance reporting.

Ideal Candidate:

The ideal candidate will possess a strong technical inclination and hands-on experience. Experience supporting enterprise virtualized environments on desktops, operating systems, client applications, and mobile devices will be advantageous. Proficiency in operating systems, particularly Windows Clients/Servers and various Linux distributions (such as Red Hat, CentOS, and Ubuntu), is essential. Familiarity with backup and recovery applications will further enhance your suitability for this role.

· Directs and/or coordinates electronic engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
· Directs and coordinates electronic engineering activities concerned with development, procurement, installation, calibration and maintenanceof instruments, equipment and control devices required to test, telemeter and record test data.
· Determines conditions under which tests are to be conducted and sequences and phases of test operations.
· Conduct and support Validation activities on Test System/Equipment and/or process setup.
· Interfaces and confers with scientific, engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
· Analyzes and interprets test data and prepares technical reports for use by electronic or software engineering, and management personnel.
· Develops or uses computer software and hardware to conduct tests on electronic products and systems or software.
· Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as proper problem solving techniques.
· Resolves test yield problems by performing analysis of root causes, developing and coordinating corrective action measures and monitoring improvements.
· Coordinate equipment/tester maintenance and repair support as required.
· Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.
· Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirement

· Technical knowledge of PCBA and / or System box build
· Able to read and understand 2D drawings, schematics for components
· PC Literate: Word, Excel, Power Point, AutoCAD etc.
· CAD system basics
· Good technical and commercial communication skills. Excellent verbal and written communication skills.
· Ability to work in a customer oriented environment and work well with all internal functional areas, customers and suppliers.
Good team player

Job Description

SEPPURE is a separation technology company developing novel membrane materials and membrane processes for sustainable chemical separations without the use of heat. SEPPURE is disrupting the energy-intensive chemical separation processes, such as distillation and evaporation, through the introduction of novel chemical-resistant nanofiltration membranes. With up to 15% of the world’s total energy spent on industrial-scale chemical separations, SEPPURE’s sustainable process facilitates decarbonisation by substantially reducing global energy use, emissions, and pollution.

Now, we have an opportunity for Process Engineer based in Singapore.

Roles and Responsibilities

The applicant will join Engineering Team and involve in laboratory work and field piloting.

The applicant will

· Support/lead engineering activities at field piloting such as installation and commissioning of equipment by working closely with customer, contractor, and equipment fabricator.

· Operate field pilot, sampling, and data collection

· Support analytical lab and laboratory testing

· Data analysis and report writing

· Preparing engineering package to customer.

Requirements and Qualifications

· B.Sc., M.S. or equivalent experience in chemical engineering, environmental engineering, or related field.

· Able to handle chemicals, perform HAZOP analysis, and strong safety awareness.

· Good knowledge of problem-solving and project management.

· Strong communication skills and report writing.

· Able to work independently (self-driven) and within a team environment.

· Prior experience in managing piloting site or solvent treatment processes is a plus.

· Fresh graduate is encouraged to apply.

Our Client, a Japanese MNC founded 60 years ago, today with over 15 thousand employees in 27 countries and 56 locations around the world, specializing in equipment, fabrication of integrated circuits, flat panels display and photovoltaic cells for the Semiconductor industry.

Responsibilities:

• Provide highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems
• Perform continual improvement programmes, parts overhaul, preventive maintenance, modifications and repair works on equipment
• Serve as company liaison with customers on administrative and technical matters for assigned projects
• Coordinate logistics arrangements with customers on equipment related matters.
• Responding to customers' complaints provides time to solutions to resolve customers' issues
• Monitor the performance of the product, provide regular update reports and feedback on customer's service requests
• Report common complaints of customers to management in order to address the situation for future reference

Requirements:

• Degree/Diploma in Electrical/Electronic/Mechanical/Mechatronics Engineering or its equivalent
• Some relevant experience with semiconductor equipment knowledge
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment
• Required to work or on standby after office hours/weekend/public holiday

Short Listed Candidates will be Notified & Contacted.

PrimeStaff Management Services Pte Ltd

EA License No.: 95C5411

EA Personnel Reg. No.: R1106591

DUTIES AND RESPONSIBILITIES:

• Experience in Mechanical, Chemical, Gas and etc.
• Reviewing and management of all design documentation for Mechanical system, Chemical & Gas system and Control system.
• Plan and implement Project Management Control
• Able to understand construction shop drawing
• Familiar design calculation with Mechanical (HVAC, Process System and Others)
• Assist Project Manager to plan, and project execution
• Assist Project Manager to determine project budget, project schedule, and scope of work and deploy appropriate staff
• Manages and monitors site progress in project
• Collates analysis drawings, plans, specifications and other documents relating to construction project
• Identifies risks, review and advise in the risk-impact assessments and manages compliance to risk-impact management
• Direct, lead and support other project team in managing and executing multiple tasks and project
• Manages no inn-conformances, corrective and preventive actions process and ensures follow-up within stipulated timelines
• Experience on conducting, inspect and witness of welding & welder qualifications test mechanical test, materials receiving, and NDT testing.
• Able to verify of material requisition and taking-off quantities, site measurement.
• Able to prepare progress payment claim, variation orders and others.
• Develop project reports on a timely basis
• Maintain, manage and document all project reports and statements
• Other related duties, as assigned

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for manual lathe machines and CNC machines
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Electrical and Instrument Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Job Responsibilities of Electrical and Instrument Engineer:

• Review project specs to ensure equipment design meets contract requirements.
• Prepare, review, and approve instrumentation and electrical deliverables (e.g., lists, data sheets, diagrams, schedules).
• Create material requisitions and perform technical bid evaluations for electrical and instrumentation equipment (e.g., transformers, MCCs, flowmeters, control valves).
• Develop engineering standards and procedures for design and production.
• Monitor project costs, timelines, and compliance with technical specifications.
• Attend technical and HAZOP review meetings to address client feedback.
• Support plant start-up, commissioning, troubleshooting, and manual preparation.
• Provide technical support to sales, engineers, and project managers.
• Self-manage daily engineering tasks while adhering to health and safety protocols.

Requirements

• Bachelor’s degree in engineering discipline
• 5 years’ E&I experience in water treatment industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Responsibilities :

• Provide post-sales maintenance support on servers/storage (IBM/HP/DELL/SUN) and operating systems (Linux/Unix/Windows) at customer locations
• Troubleshooting and replacement of hardware;
• Troubleshooting of operating system;
• Handling of hardware migration/implementation project;
• Perform preventive and proactive maintenance;
• Escalation and management of complex issues.

Required skills and experience:

• Minimum 3 years of experience in a similar capacity and diploma holder or above in Computer Engineering/Science or related discipline;
• Strong server and storage hardware configuration knowledge will be an advantage;
• Capable of using operating systems: Microsoft Windows, Unix, ESX, and Linux are preferable;
• Proficiency in solving computer hardware-related issues for IBM, DELL, and HP
• Strong sense of customer service and team efficiency;
• Able to provide non-office hours standby and support service;

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

• Well Established Company
• Basic $3000 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working day: Monday to Friday
• Working house: 8am to 5pm

Job Responsibilities:

• To ensure all the maintenance works carried out systematically, efficiently & safely
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day-to-day activities
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors
• To manage all Mechanical & electrical Instruments spare parts and tools

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Min 2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• To analyse user requirements and design, develop, implement and maintain computer applications to support and assist users to meet their business objectives more effectively and efficiently.
• Develop, support and enhance the Data Download Centre (including Engineering Portal) and iSCM websites.
• Develop, support and enhance Excel productivity enhancement tools (VBA macros).
• Support end-users in usage of Plasma and ACCPAC and help to resolve any operational issues, including working together with vendor (Databit) if necessary.
• Develop and enhance data extraction and transformation mechanisms on source systems (e.g. Plasma, YEOS, NYQT, Oracle BI, SAP RFC, PTS etc.) and store the results into Plasma Info Server Monitor the space consumption of Plasma Info so that Server database so that potential problems (e.g. disproportionate consumption of disk space by a particular table, depletion of data tablespace, excessive consumption of temp tablespace) are detected and resolved early to avoid unscheduled database downtime.
• Perform ad-hoc retrieval of order/production/sales data to support incident investigation, reporting or other requests.
• Support Migration Activities of Existing Plasma Info Server to SAP.
• Support & ensure successful implementation of Company-wide Automation (ERP) Projects.

Requirements:

• Degree in Info Systems/Computer Science or its equivalent
• Prefer 2-3 years relevant experience in Manufacturing Industry.
• Entry level are welcome to appy as training will be provided.

Knowledge:

SQL; Oracle PL/SQL; MS SQL Server Transact-SQL

Object-oriented analysis and design

ASP.NET 4.5.1; C/C++/C#; XML

JavaScript; JQuery; CSS; HTML

Excel VBA; VBScript; PowerShell

PHP, VS.Net, MSOffice

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063