· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Working Place : Pasir Ris

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

Monday to Saturday

SUMMARY:

Work within a team of skilled technicians to provide serviceable vehicles to ensure that service delivery standards are met, whilst maintaining vehicles to the service standards required to comply with the Company’s policies and procedures; as well as legislative and LTA contractual obligations.

PRINCIPAL RESPONSIBILITIES AND AUTHORITIES:

• Responsible for maximising personal performance by working efficiently and effectively which should achieve a minimum of four vehicle inspections in a working day – allowing approximately two hours for each inspection;
• Ensure a ‘right first time’ approach to maintenance, remaining flexible and adaptable to the changing maintenance demands;
• Deliver a high standard of vehicle repairs in accordance with the approved service regimes and work instructions;
• Carry out the duties allocated by the Workshop Planning Manager and Engineering Supervisors ensuring that the required work is undertaken within the specified timelines;.
• Diagnosing any possible faults with the vehicles and determining the best and most effective solutions for repair and maintenance;
• Remain up to date with the changing technologies of the fleet and attend the relevant courses when necessary;
• Proactively contribute to the team performance to ensure that vehicles are maintained to highest standards;
• Respond to Operations Control requests to attend to on-road repairs;
• Undertake first-line maintenance of the CFMS and BTS equipment in accordance with the relevant maintenance schedule;
• Responsible for correctly booking out any parts required to carry out maintenance;
• Ensure that parts are used in a cost effective manner and identify any areas of concern to the Engineering Supervisor;
• Communicate effectively with the Operations Supervisors, Bus Captains and the Engineering Team to deliver a reliable maintenance service;
• Adhere to the Company Health and Safety procedures in relation to working in the Engineering department;
• Ensure that the correct PPE is worn at all times and that safety equipment is used when working with machinery;
• Train other employees in engineering procedures and processes as to a level of competency, including trainees/apprentices.
• Undertake any additional reasonable duties as requested by the Engineering Supervisor and Workshop Planning Manager.
• Undertake any training and development activities as requested by the Engineering Supervisor or Workshop Planning Manager.
• Maintain good housekeeping, safety and security of workshop and work areas
• Ensure compliance with all workshop procedures, safe work practices and work instructions
• Mentor and supervise assigned staff under your charge.
• Ensure Zero Industrial accident and compliance to all statutory and or government regulations.

SKILLS, EXPERIENCE, CONDITIONS SPECIFICATION:

• Flexibility of working hours is essential as shift and weekend are a feature of this role.
• Hold the relevant trades certificates for the functions undertaken within the position. Minimally possess a NITEC in Automotive Technology, Mechatronics or equivalent
• An engineering awareness and familiarity with vehicle component parts;
• Experience using computer based inventory systems;
• Hold and retain a valid forklift operator licence,
• Possess a valid Class 4A / 4 / 5 Driving license - if not, may be required to obtain within 12 months of commencing employment in the position.

SAFETY AND COMPANY RESPONSIBILITIES:

• To adhere to all company policies and procedures.
• To take care of your own safety and the safety of others at all times by complying with your responsibilities, particularly in relation to health and safety, as outlined in the company policies and procedures and under the relevant Health and Safety at Work Act.
• To report to your line managers any injury, collision of dangerous occurrence in which you may have been involved, or are aware of having taken place at your work location, or any concern you have about health and safety issues.

What’s the role?

Shell is looking for individuals to own the process unit to which they are assigned and will be responsible for the operational activities on their unit, the standard and housekeeping of the unit, process isolation and decontamination and the control of maintenance work via Permit to Work (PTW).

• Display field leadership of personal and process safety, and environmental stewardship.
• Ensures adherence and understanding of policies, procedures and guidelines pertaining to health, safety, and environmental issues.
• Apply Blue Zone Barrier Thinking to job planning and hazard recognition and mitigation development.
• Be present on site for critical activities and Take 5 before every task.
• Display learner mindset and operational discipline and thoughtfully comply to the work processes and procedure in execution of core operational duties and work processes including Ensure Safe Production (ESP), PTW, process isolation planning and execution, housekeeping etc.
• Operate process units within the Production Area in accordance to Standard Operating Plan, Daily Operating Instructions, Production Team Lead’s instructions and supervision.
• Operate the plant in compliance to site Operating Procedures, Standing Instructions and site Health, Safety, Security, Environment procedures.
• Optimize plant operations within the Design-Operating-Window and the Integrity-Operating-Window.
• Perform proactive monitoring of the plant and equipment in accordance with ESP and unit specific requirements (as per Production Unit Tier 3 procedure and training workbooks).
• Contribute to keep process materials records and to maintain good housekeeping practices on process plant and in console areas.
• Safely execute minor maintenance activities (MMBO)
• Perform other related duties as required and instructed by senior colleagues.
• Manage plant upsets and abnormal conditions and subsequent troubleshooting including incidents/plant emergencies and subsequent follow-up.
• Perform initial troubleshooting of more challenging/abnormal issue/high risk task (e.g. valve passing, Loss of Primary Containment (LOPC)/test point or drain line choked etc.) and seek assistance when required.
• Proactively support peers from own/other clusters to deliver shift plan when need arises after completing of own duty.
• Report unsafe acts/conditions, near misses and incidents.
• Support shift 5 to understand the root cause of Product Quality/Design Operating Window/upset incident occur within the shift to capture and facilitate learning across shift.
• To deliver the shift plan and steer/targets safely and timely for their unit, in addition to keep unit operations safe and optimized in energy, margin and PQ.If an Authorized Gas Safety Tester (AGST), he/she conducts PTW issuance on unit, including oversight of critical activities, checks for interface across different field positions, i.e. potential incompatible activities. If not an AGST, he/she ensures that he/she has knowledge of all permits issued on their unit.
  Maintain rigor of work/procedure execution by having pre-execution discussion to surface any concern and remind each other about necessary precautions, and timely signoffs of procedures.
  
• Provide unit orientation and practical hands-on skill training to junior PTs/ PT new to the unit on field execution.
• Provide clear and concise information in shift report and a thorough handover to other shifts is conducted in accordance with ESP requirements for situational awareness, proper follow-up and work planning.
• Raise GSAP notifications for defects/maintenance issues with preliminary assessment of work order prioritization for the GSAP notification done based on SAP Business Warehouse (BWP) matrix.
• Create or review process isolation job packs (including de-oiling and decon) and support the execution of process isolation safely and timely to meet Operation Maintenance Coordinator (OMC)’s plan schedule, prepare and approve PTW, and assist in coordination of daily maintenance planning on their unit.
• For senior PTs, the incumbent is a practicing full AGST and will play an active role in helping to set process isolation, PTW, ESP and equipment care standards on their unit.
• Implement assigned operational controls identified in the HSSE Management Systems, Bowties, Hazard sheets and HRAs.
• Monitor the performance of process equipment in his/her process area and make corrections and normalize deviations from plan or escalate to Production Team Lead (PTL).
• Start up and shut-down any section of the process plant in accordance with laid-down procedures and as directed by PTL.
• Contribute in the preparation of shutdown lists, review of P&I (PEFS) diagram checks and produce sketches for process isolation job packs or plant changes.
• Inspects process equipment after completion of maintenance work, including independent check of internals of all equipment before box-up.

What we need from you

• Nitec/Higher Nitec in Chemical Process Technology or Diploma in Chemical Engineering / Chemical & Green Technology / Clean Energy;
• Minimum 3 years of relevant experience in chemical processing or oil refining / utilities e.g. steam boilers and Cogeneration for Process Units;
• Good understanding of Ethylene Cracker HoA (Higher Olefins and Aromatic, C4+) or Utility (Boiler, Cogen, Wastewater Treatment etc.) is an advantage.
• Able to operate DCS independently;
• WSQ Qualifications in workplace safety and health for process plants/manufacturing sites
• Mandatory HSSE competency requirement specifically on ACSSEW (confined space safety assessor);
• Qualified as a gas tester and/or confined space assessor;
• Flexible to perform both shift work and day-work, as well as overtime, when the need arises;
• Should possess the necessary pre-requisites to perform as an Auxiliary Fire Fighter (AFF) who may be called upon to participate in auxiliary firefighting training or in the event of emergency situations.
• Should also be prepared to be qualified as a First Aider.
• Strong problem-solving skills, good technical and process aptitude, and ability to remain calm and composed during emergency to make informed and risk-balanced decision are required.
• Newly graduated applicants are welcome to apply as we have a structured In-house training programme.

Established fire-fighting company looking for Service Technicians.

- Training will be provided

- Perferably with Class 3 Driving License

- Able to work overtime

- Secondary or ITE welcome

- Preferably staying in Clementi or Jurong area

Interested please email with resume to [email protected]

We are looking for a proactive and detail-oriented Solar Technician / Solar Engineer to support our Project Manager in the planning, coordination, and execution of solar projects. The ideal candidate will assist in optimizing resources, conducting site studies, managing site teams, and ensuring projects adhere to safety standards, timelines, and budgets. This role is perfect for fresh graduates looking to gain experience in the renewable energy sector, with on-the-job training provided.

Key Responsibilities:

• Assist the Project Manager in coordinating, planning, and forecasting resources to optimize utilization and meet project milestones and budgetary goals.
• Conduct site studies to assess conditions and provide recommendations for photovoltaic (PV) systems.
• Oversee and manage the solar project site team, ensuring that all work complies with safety regulations and standards.
• Monitor work progress at the project site to ensure that it aligns with the technical specifications, project schedule, and budget.
• Ensure that all site activities follow safety standards and regulations.

Requirements:

• Diploma in Mechanical or Electrical Engineering, or a related discipline is preferred.
• Fresh graduates are welcome to apply. On-the-job training will be provided.
• AutoCAD, SolidWorks, and other modeling software (e.g., SketchUp, PVsyst, Helioscope).

If you are keen to join our dynamic team, please submit your resume in either Word or PDF format to [email protected]. In your application, kindly include the following details:

• Current Salary
• Expected Salary
• Availability
• Reason for Leaving

We appreciate your interest in this opportunity. Please note that only shortlisted candidates will be contacted for further consideration.

By submitting your application or resume, you acknowledge and consent to the collection, use, retention, and disclosure of your personal information by us to potential employers through our services.

EA (23S1595/R23116355)

Job Description:

• Perform functional and aesthetic inspection of aircraft cabin interiors.

• Document any defects, perform troubleshooting and carry out rectification.

• Support cabin modification, retrofitting and component repair tasks.

• Any other duties as assigned by the supervisor

Requirements:

• NITEC / Higher NITEC, preferably in an Engineering discipline

• At least minimum 2 years of relevant aircraft cabin maintenance experience

• Able to work flexible hours, including weekends and public holidays (rotating shift hours)

We are looking for a Software Quality Assurance Analyst who are passionate about improving the quality of the services. The QA will be part of an in-house team tasked with developing and maintaining the system.

Responsibilities:

• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Create, maintain and improve the automated test framework and test environments
• Conduct testing on new features and file defects
• Perform various tests such as manual/functional/performance/exploratory tests support UATs
• Assist in resolving production cases
• Participate in all agile ceremonies

Requirements:

• Degree in software engineering, computer engineering, electrical engineering or Infocomms-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Experience with various testing tools will be an added advantage:
• Experience with open-source automated testing frameworks (i.e. Robot, Appium, Selenium) or Enterprise level testing tools (e.g. HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated

Join us in our walk-in interview!

Date: Wednesday, 6 November 2024

Time: 10.30am to 4.30pm

Venue: One Punggol Community Club

Level 4 Multi Purpose Room

1 Punggol Drive S(828629)

(Opposite Safra Punggol)

Note: Please bring along a copy of your resume & education transcripts for reference

*Singapore Citizens only*

Job description:

Looking to venture into the Aerospace industry? NO PRIOR EXPERIENCE REQUIRED

We are the world's largest airframe MRO solution provider with over 45 years of experience in aviation and are backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe.

We are looking for individuals who are passionate about Aerospace MRO to join us today!

What you can look forward to:

• Structured training program (classroom + OJT)
• Competitive remuneration package
• Career growth and development

Responsibilities:

(After completion of Aircraft Maintenance Technician (ACMT) training)

• Perform preventive maintenance checks on aircraft systems, structural and/or electrical/ electronic components
• Fabricate and perform approved minor repairs on airframe sheet metal parts, electrical wirings and/or subsystem assemblies' components
• Perform simple operational checks on aircraft system and/ or component using appropriate test sets / tools to ensure serviceability and airworthy in accordance with national regulatory, company procedures and safety requirements

Requirements:

• NITEC/Higher NITEC in any discipline OR
• Diploma in any discipline OR
• Minimum 3 GCE "O"/ "N"/"A" Level (Passes in English/Maths/Science)
• Passionate in working on aircraft and technical work
• Singaporean only

Role and Responsibilities:-

• Able to lead and guide a team of building technicians in addressing and resolving daily M&E issues
• Coordinate and assist in daily operation of the M&E services, such as carrying out all planned maintenance schedules and periodic inspection, and up-keep of the estate's common area
• To perform weekly check on the estate's M&E system, including minor troubleshooting on failure of systems
• To carry out minor troubleshoot on any failure on the M&E systems
• To maintain a proper stock control for all mechanical/electrical accessories and materials purchase
• To respond to ad-hoc complaints received from the Management office from time to time
• To respond and attend to all emergency calls, and for reinforcement of manpower during major breakdown of M&E equipment within the estate's common area
• To ensure that service contractor conduct the servicing properly and in accordance to the service contract
• To follow external contractors that is at site to carry out routine servicing
• To attend to any other job function on M&E related issues that may be assigned from time to time
• To carry out minor items of repair and handyman job, such as repair of fixtures / fittings and touch up painting

Requirements:-

• GCE O Level / NTC 2/3 or Nitec / HigherNitec in Mechanical / Electrical / Building
• At least 5 year of experience in maintenance of M&E systems and building facilities

Candidates who are able to start immediately will be prioritized.

Interested candidates kindly WhatsApp resume and below details to 9855 1978:-

• Notice to current employer
• Earliest start date
• Stay location
• Expected salary

-Collect the spare parts from the warehouse store based on the daily job indicated on the tablet.

-Troubleshoot and resolve issues on malfunctioned HVAC systems.

-Wash and clean all dismantled parts to improve efficiency and air quality.

-Refill refrigerants by replenishing and fixing leaks as needed.

-Communicate with clients with regards to problems in equipment and post-jobs reports.

-Ensure safe-keeping of hand tools and maintain good housekeeping.

-Must wear personal protective equipment (PPE) when necessary (e.g. googles, earplugs, respirators, safety harnesses, safety shoes, helmets, sunscreen)

-Ensure all works are carried out safely in accordance with safety procedures and practicing of Workplace Safety and Health (WSH) Act.
-
Provide technical advice and assistance on all maintenance functions.

-Prepare service reports after every completed job for customer's endorsement.

-Handle any ad-hoc projects and duties assigned by reporting manager and/or management.

Job Requirements:

-Possess a Singapore Class 3 license will be an added advantage.

-Minimum Nitec / NTC 2 or 3 certificates in Electrical, Mechanical or Electronic field.

-At least 1 year of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.

-Positive attitude, good interpersonal & customer-service skills

-Experience in air-conditioning repair & maintenance.

-Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.

-Ability to work independently and collaboratively in a team.

R&T RECRUITMENT MANAGEMENT 12C5922

Our client is a 3rd party full-service supplier of logistics and engineering solutions. Currently, our client is seeking for Technician (Rolling Equipment) to be part of the team.

JOB DIMENSION (SCOPE)

• Carry out preventive maintenance and corrective repair works on packaging and conveying equipment
• Troubleshoot and rectify electrical, mechanical, pneumatic and hydraulic system faults on equipment
• Identify mechanical, electrical, and technical issues through inspections and tests
• Analyze problems, diagnose malfunctions, and find solutions
• Use various tools and equipment for diagnosis and repair
• Maintain accurate records of repairs and parts used
• Communicate findings and repair option
• Test vehicles post-repair to ensure proper functionality
• Order and replace parts, collaborating with suppliers
• Attend to breakdown repair and recovery of operational equipment
• Reduce equipment downtime and enhance equipment performance through quality maintenance works
• Proper recording of works carried out on equipment. Equipment includes vehicles, chassis, forklift, industrial facilities, etc (list is non exhaustive)
• Any others adhoc job assigned by supervisor
• Maintain high standard of housekeeping at workplace
• Ensure strict adherence to all workplace Health & Safety policies, legal and company regulations, with proper documentation and storage.
• Practice safe work procedures and safety rules implemented at the workplace.
• Not to engage in any unsafe or negligent act that may endanger self or others.

REQUIREMENT

• Possess Diploma, NITEC, NTC-2 in Electrical Engineering
• General knowledge on AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Basic knowledge of PLC and electrical system
• Min. 3 years' relevant experience in automation systems
• Great teammate with initiative and a positive attitude towards learning
• Self-motivated individual with strong sense of responsibility

Job Responsibilities:

1. Monitor food cooking machines and make adjustments to the controls for devices such as boilers, ovens, fryers and cookers.

2. Clean and reinstate work stations, operate cooking equipment and dispose of waste following the SOPs.

3. Monitor food processing equipment and report cases of improper functions.

4. Operate equipment and machinery in food production lines.

5. Check food quantities, container formats and materials against production instructions given.

6. Remove the finished product from the production line and push batches to the next step of the process for packaging.

7. Verify that each finished item meets the quality standards of the company by observing the size, shape and luster of each snack item

8. Other ad-hoc duties as assigned.

Job Requirements:

1. Preferably with experience in F&B sector.

2. Night Shift

3. Must be able to work on weekends and public holidays.

4. Staff Meal will be provided.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Key Responsibilities

• Incident Handling: Perform trouble shooting via detailed analysis of HW and SW failures with the usage of all available diagnostic tools. This includes repair of HW on component level, cleaning and adjustment of mechanical components and configuration and installation of SW.
• Preventive Maintenance: Perform routine checks according to documented preventative maintenance procedures and refill consumables as directed.
• IMAC/R: Perform Installation, Movement, Addition, Change and Removal of hardware and software products and components as directed.
• Customer Training: Instruct and train customers on usage and operation of installed HW and SW.
• Process Tasks: Receive briefing for incidents and orders from dispatch function. Update dispatch function of all unforeseen issues. Provide detailed debriefing on all performed activities. Proactively inform customers about performed actions.
• Continuous Improvement Process: Observe technical or process problems at all times, proactively inform about potential problems and offer improvement suggestions if possible.
• Actively use corporate tools and processes for knowledge sharing, e.g. knowledge base to find solutions and provide input for it.
• Training: Participate in regular hardware and software trainings (on the job, classroom trainings and web-based trainings) according to the corporate training concept and receive certification after passing relevant test.

Required Qualifications

• Proven track record of more than 1 year Service Technician with banking/retail experience.
• Successfully completed education in IT- or mechatronic/electronic-related profession.
• In individual cases it is possible to assign the job to an employee, if the essential professional knowledge is acquired by work experience.
• PC literacy and good knowledge and application of the relevant tools and methods.
• Product knowledge of relevant industry and basic ITIL skills preferred.
• Ability to lift and move heavy loads, stand most of the day, climb, bend and stoop while working on equipment.
• Acceptance of exposure to the outside elements.
• Shift adaptability, which would include an on call rotation for evenings and weekends.
• Exceptional customer service skills are needed.
• Ability to organize and inventory truck stock parts and tools.
• Sense of urgency, organizational skills, professional presence and work in team environment.
• Ability to pass MVR, background and drug test where required.

Preferred Qualifications

• Firstline or Service Technician work experience preferred.
• Vocational/Trade School preferred

Male Singaporean

Diploma Holders

Have a valid Class 3 Driving Licence

Minimum 2 years work experience in Fire Protection Industry

Ability to work effectively both independently and as part of a team

Positive attitude and ability to communicate well with all levels

Perform ad-hoc duties as and when assigned

Job Description:

• Supervise electrical maintenance activities of the site to ensure uninterrupted availability of support services to the plant
• Ensure timely response to issues such as electrical outages, breakdowns, and plan for contingencies
• Complete timely PMs and perform scheduled inspection for all electrical equipment
• Attend to emergency calls when needed
• Prior working experience with CMMS (Maximo) and MS Office
• Ensure that all work orders are completed, and updates provided in the CMMS on time.
• Perform risk assessment of maintenance activities in conjunction with other stakeholders like engineers, operators, EHS personnel.
• Maintain a high level of Safety and cGMP compliance during maintenance activities.
• Coordinate with external contractors for specialized maintenance work.
• Provide feedback on maintenance issues and trends associated with failures and root causes.
• Actively participate in implementation of CAPAs. troubleshooting, plant and equipment improvements.

Where you fit in

Purpose of the Maintenance Technician (Instrument) is to carry out hands-on maintenance and coordinates maintenance work related to instrumentation in Production Unit (PU). The role assures that activities on the weekly schedule, emergencies or assigned non routine maintenance work are executed with quality and efficiency and in compliance to the site Health, Safety and Environment requirements.

Accountabilities include:

• Provide day-to-day hands-on maintenance/troubleshooting of instrument related matters in PU.
• Ensure compliance of engineering practices and assets with statutory obligations, Engineering Codes of Practices and Shell DEP standards.
• Review and communicate daily / weekly schedule assignments with workforce. Plan / execute / obtain resources, materials, services, and equipment for E and SB priority work repairs.
• Ensure compliance with HSSE standards, Monitor and feedback on the maintenance effectiveness process and take corrective action if required, GSAP administration of time sheets, service, purchase, and material orders. Lead in the timely daily maintenance schedule execution, E/SB work order planning, E/SB reviews, daily updates
• Liaise with/consults Operations, Technology, other Engineering and Procurement departments as part of the execution of jobs
• Initiate and plan to upgrade instrument systems before obsolescence and deteriorations beyond repair.
• Perform end of day schedule progress (percent complete, MCMP, TECO and approve actual hours)
• Ensure completion of QA / QC and condition reports. Field presence and supervisor of maintenance contractor (craft productivity and quality of work) for effective and efficient execution
• Manage the activities in the hard schedule, adopting small adjustments or deviations where necessary. Feedback jobs that roll-over into next week(s) to the scheduler. Identify risks for not achieving schedule and taking mitigating action, keeping maintenance supervisor / team lead informed. Feedback to maintenance planning and scheduling
• Timely request to operations for maintenance permitting Analyze and trouble-shoot instrumentation problems
• Update and maintain spare parts inventory
• Seek improvement in techniques, procedures and technology to improve reliability at minimum costs and within budget.
• Report and recommend improvement on recurring problems/breakdowns
• Involve in scheduled safety walkabout
• Assess the risk of all day to day jobs that is carried out Develop formal JOHAN with all relevant parties for jobs with medium and high risk
• Full compliance with LSR & Safety Rules at all times to achieve Goal Zero

What we need from you:

To be successful in this role, you will have:

• Minimum NITEC Level 2 certification in Instrumentation or Electronics or Electrical, or Diploma/Degree in Instrumentation or Electronics or Electrical
• 3-5 years of relevant experience in Instrument construction/ Maintenance in oil & gas, chemical/ petrochemical or related industries.
• Knowledge in basic control system and/or functional logic is an advantage.
• Proven ability to diagnose and troubleshoot instrument and control system malfunctions.
• Experience with calibration of industrial instrumentation.
• Understanding of control system principles (PLC, DCS) and communication protocols (OPC, Fieldbus, Modbus, HART, Vnet).
• Able to understand PID and have knowledge of instrumentation and control element
• Basic understanding of server system administration, including troubleshooting and maintenance procedures.
• SAP (GSAP) knowledge in Maintenance Module.
• Experience in field work interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Self-motivated with a strong commitment to teamwork and collaboration and managing contractors and vendors.
• Able to work in Team environment as well as standalone when need arises.

* NITEC or equilevant in M&E [Electrical/Airconditioning & minor repair work] with 2-3 years experience in

Commercial Building services

* Supervise team Contractors during maintenance servicing

* Perform routine maintenance/inspection of building work

* Must be prepare to work shift, including weekends

interested applicants, please email: [email protected]

Jobscope

• Operate equipment, clean, assemble and maintain the cleanliness of the equipment.
• Maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment in accordance with SOP / batch document.
• Perform online monitoring and check through the batch
• Complete all relevant documentation required for packing, maintenance and cleaning of equipment in the work area.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all duties required to meet the schedule.
• Check dispensed input packaging materials and product details against batch document.
• Co-ordination with Engineering for break down rectification of Packing equipment.
• Participate in investigation of process deviation, cGMP and all other compliance related matters
• Ensure compliance to GxP / Safety / Quality policies.

Requirements

• Min NITEC education or Higher NITEC/ Diploma in Chemical Processing/ Chemical Technology/ Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• 2-5 years of manufacturing experience in Pharmaceutical, Chemical or related industries.
• Fresh candidates are welcome to apply too as training will be provided
• Good understanding of safe working practices and cGMP.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

GO ID: https://go.persolkelly.com/job/apply/8809

Role: ACMV / HVAC / Aircon Technician
Duration: 1 year contract (Renewable)
Location: Multiple locations - Changi Business Park Crescent, Asian Square Tower, Orchard Rd
Working hours: 12 hours shift; 4 days a week - x 2 Tues & Wed (Night) + x 2 Sat & Sun (Day)
Salary: Up to $3.1k + 1 month bonus

As an HVAC Technician, he will maintain mechanical and electrical equipment for commercial HVAC systems at facilities by conducting proactive performance testing and ongoing scheduled maintenance.

Core Responsibilities:

• Install, repair, adjust, and maintain small electric or pneumatic control systems used for building. This includes heating, ventilation, air conditioning, and refrigeration systems and equipment.
• Conduct ongoing maintenance on building HVAC equipment to ensure proper equipment operation and compliance with all applicable codes, regulations, and work safety.
• Troubleshoot equipment failures and determine the best course of action for equipment modifications.
• Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion.

Requirements:

• Nitec / Diploma with 1 - 2 years of job-related experience.
• Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 20kg or more.
• Ability to follow basic work routines and standards in the application of work.
• Communication skills to exchange straightforward information.
• Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.

We regret to inform you that only shortlisted candidates will be notified.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/8809

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Location: Bukit Merah

3 months renewable Temp Staff

Any 5 days Mon - Sunday 8:30am - 6pm / 12pm - 9pm

rate: $12/hr

Duty will be packing of OT loaner sets in a sterile environment

Requirement:

Must be able to carry heavy load: 12-15kg

Must be comfortable to wear PPE

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!
Interested candidates, please submit your resume to [email protected]

Alison Chen
Outsourcing Team
Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Information:

1. Basic Salary: $2,600 - $3,500 depend on experience ;
2. Polytechnic graduate：$2,600 ; ITE guaduate: $2,400 - $2,500
3. Attendance: $40
4. Morning Shift: 7am - 3pm; Afternoon Shift: 3pm - 11pm ($8.50/day); Night Shift: 11pm - 7am ($14/day)
5. Company transport at various location in the west

Responsibilities:

• Operate and monitor machinery on the assembly line to ensure smooth operation
• Conduct routine maintenance tasks, identify and address any issues with machine operation
• Troubleshoot & repair production machines for mechanism and electrical issues to minimise downtime
• Inspections to identify potential malfunctions and perform preventive maintenance
• Work cross-functionally to identify areas for improvement in quality, productivity and cost reduction
• Develop/modifications to equipment and processes to enhance efficiency and performance
• Plan and execute improvement projects from conception to completion
• Evaluate existing processes and practices to identify opportunities for optimisation
• Propose solutions to improve operational efficiency and product quality
• Develop and update programming for automated production equipment to optimise performance
• Provide training to operators on the operation and maintenance of automated equipment as necessary
• Conduct washing to remove contaminants from ball bearings, ensure adherence to quality standards
• Perform test to assess quality and integrity of ball bearings, documenting results accurately
• Visual inspections to identify defects or abnormalities in the manufacturing process
• Compile audit work papers and documentation to ensure completeness and accuracy
• Assist in the development of audit protocols and procedures
• Perform other administrative duties as assigned
• Adhere to all safety protocols and regulations to ensure a safe working environment
• Maintain cleanliness and organisation in work areas to promote efficiency and safety
• Review/recommend changes on procedures for work environment and safety aspects (E.g. IATF 16949, ISO14001, Safety Management Systems, etc.)
• Attend meetings, reviews, discussion and coordinate with Superior to achieve target and yield rate.

Requirements:

• ITE Nitec/Higher Nitec/Polytechnic diploma in Mechanical/Electrical/Mechatronic engineering
• Entry level are welcome to apply
• Comfortable wearing jumpsuit and cleanroom environment
• Able to commit monthly rotation shift work

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Scope of work:

1. Clearing of paper, card, passbook, and cash jams;
2. Replenishing nearly depleted paper and other consumables such as receipt printer paper and printer ribbons;
3. Basic remedial maintenance, which consists of servicing obvious items that will prevent a repeat or subsequent FLM call;
4. General cleaning of the ATM, ATM+, BTM and CDM exterior, display screen, fascia and immediate surrounding area while on-site for the provision of other FLM services;
5. Reporting site problems such as lighting, facility or environmental conditions to Customer;
6. Initial on-site investigation of network related incidents;
7. Provide SST safe / vault access to SLM if required;
8. Suspend call for SLM when required (i.e., issue beyond FLM such as parts replacement);
9. Report vandalism incidents to relevant parties based on established process;
10. Retrieval of retained passbooks and cards when on-site for a remedial call;
11. Ad-hoc special attendance to site to collect captured cards or passbooks;
12. Escalation of vandalism to Customer
13. FLM is required to perform OT maximum 2 hours when required by customer

Job requirements:

· ITE graduate or equivilant

Able to work 10hrs rotation shift and weekend/PH.