· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

Geotechnical:

- Experienced in the design of earth retaining and stabilizing structures, deep foundations, reclamations, slope stabilities.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Responsibilities

· Assist Project Manager in project management, survey, managing site works, construction activities, monitor work schedules, update progress, planning and implementation in accordance to master work plan and scope of work within project budget.

· Provide guidance and supervision to contractors/ in-­house workers in relation to Electrical/ Structured cabling works in accordance to proposal for site build for cabling infrastructure, installation quality, and adherence to site work safety requirements and to resolve technical issues.

· Prepare project submissions, tenders, system designs, installation drawing & coordination of all technical activities on assigned projects

· Participate in project meetings and resolving project issues

Requirements

• Candidates should possess at least a Nitec/Diploma in Electrical/ Engineering or its equivalent.

• At least 1-­3 years Project Management and hands on working experience in Electrical and/or Structured Cabling.

• Able to read/write and speak English is a must.

• Able to work independently and/or work together in a team when needed.

• Able to multi­task

• Have a strong sense of leadership, customer oriented and problem solving skills

· Proficient in Microsoft Office

- Working Mon to Alt Sat from 8.30am to 5.30pm

Responsibilities:

• Assist Piping Lead Engineer and execute the tasks assigned by Lead Engineer with no or minimum supervision.
• Lead a group of piping engineers and designers to execute the tasks assigned by Lead Engineer or/and monitor the work executed by engineering design house where applicable.
• Review and monitor engineering design progress related to piping work scopes.
• Prepare and raise technical query (TQF) and engineering variation order (EVO) related to piping for additional work scopes.
• Align the piping design output (such as piping isometric drawing, pipe spool drawing, etc) with construction team to ensure all the information required by construction teams are incorporated.
• Understand department and project specific design workflow.
• Understand Contract Specification and project requirement summary.
• Understand Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and piping routine requirements.
• Understand equipment layout plan (include escape route, maintenance space, mechanical handling, other equipment).
• Understand non-piping design related requirements such as fabrication, erection, painting, QA/QC, testing and commissioning.
• Responsible for ensuring that all works meet scope and technical quality of the project and comply with project requirements.
• Monitor P&ID revisions and ensure the compliance between piping 3D model with latest P&ID.
• Monitor design input need date and data required to execute the piping design works.
• Monitor 3D model clash and design review comments / punch lists.
• Monitor the comments from Client and Classification Society.
• Monitor all the piping related interface points.
• Monitor all the hotwork, tank’s coating and drydocking related activities where applicable.
• Monitor piping procurement status and surplus material due to drawing revision.
• Monitor all the hold items that affecting piping design completeness.
• Monitor and control the development of piping weight.
• Ensure proper communication and workflow are well established between piping stress team with pipe routine and pipe support designer team. Closely monitor the compliance between piping 3D model with the latest pipe stress analysis report.
• Review/comments piping arrangement, isometric and pipe supports drawings from piping designers.
• Review/comments on piping calculations carry out by other piping engineers/ subcontractors (e.g. pipe stress analysis report, flow master report, surge analysis report).
• Review/comments technical proposal from vendor.
• Review/comments vendor certified Document (VCD).
• Monitor and control drawing revisions especially when construction already started.
• Ensure proper communication and workflow are well established between piping designing team with construction team. Monitor the compliance between piping construction drawing (piping isometric and pipe support drawing) with the latest 3D model.
• Monitor the piping design database completeness (such as 3D model attributes, etc) to meet the project Digital Engineering requirements.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Onboard vessel to carry out inspection at site.
• Provide support to piping construction, QA/QC and other non-engineering design related activities such as inspection, coating, painting, welding, test packages, etc.

Requirements:

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Min. Bachelor Degree in Mechanical Engineering.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.
• Good knowledge in Piping Design.
• Good knowledge in International Standards related to Piping such as ASME, ASTM, API and Classification Society Rules and Regulations.
• Good skill in Excel is preferred.
• Experience in using AutoCAD, Naviswork, Smart Plant, Aveva, Cadmatic, etc. is preferred.

Overview:

To lead a team of personnel (Yard and contractors) on the efficient operation of activities carried out onboard vessel (offshore newbuilding, repair, conversion and modification) or workshop and ensure that works are completed within stipulated schedules with skill, efficiency, quality and innovative solutions. Operation activities include practical design, practice procurement, project management, construction, installation, testing and commissioning. Lead the Safe Distance Officer for Covid-19 or similar where applicable.

Responsibilities:

• Administers, monitors and continuously ensures that all operations conform to safety requirements and maintains high safety standards.
• Based on defect list given by ship owner, plans, prioritises and executes repair activity based on available resources and facilities. Provide information to APM for any CM39 requisition
• Co-ordinates and disseminates all the repair activities in the repair process in a given schedule with supervisors, yardmen and contractors in accordance to the Department Work Instruction and specifications.
• Attends vessel safety co-ordination meetings to ensure that all repair activities are carried out in a safe environment and meets the applicable statutory, regulatory and contractual requirements.
• Attends department production meeting to co-ordinate work progress, update work schedules promptly and scope of work. Highlight critical path and also channel to Ship Repair manager to achieve project milestones and prevent cost overruns.
• Liases with Shiprepair Manager/ Billing Dept about variation and additional in work scope. Raise variation order for additional work not stated in the specs
• Liaises and coordination with relevant trades towards milestone set
• Liaises with Superintendent for critical activities for smooth operation and provide technical proposal.
• Ensure cost control by correct Just In Time material ordering, proper manpower deployment and reporting, rework prevention, continual improvement on work method in order to meet the EVA, KPI and Key Thrust set by the department
• Feedback to HOD and superior on any non-conformance and record in Incident reporting and follow up on corrective actions
• Ensure all completed works carried out are documented and verified by Client
• Contractors work completion report verified as per actual carried out
• Ensure proper usage of department assets and report any non-conformance
• Whenever required communicate through by means of IT networking and solutions
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations and HSE operating procedures and conduct Risk assessments before commence of work. Counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures and Audit Matters e.g. ISO9001:2015, ISO45001:2018 and ISO14001:2015.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed. Perform Safe Management/ Distancing Officer duties stipulated when assigned
• Any other associated tasks and responsibilities assigned from time to time.

Preferred Requirements:

• Preferably with 2 years’ working experience in a similar capacity.
• Effective planning skills, good supervisory ability, conflict management skills and interpersonal skills.
• Effective problem solving and decision making skills are also essential.
• Ability to communicate in other languages (like Mandarin, Tamil, and Malay) would be an added advantage.
• Basic knowledge on Piping Standard and Compliance with all Codes, Policies, Procedures e.g. ASME Code for Pressure Piping B31.3, ASME IX, IACS
• Resourceful, dynamic, excellent leadership qualities, tactful, committed, good team player, customer oriented and able to work under stressful situations.

Preferred Qualifications:

• Minimum primary education with relevant working experience or diploma in Marine Engineering or Mechanical Engineering or NTC 3 certification or equivalent or completed apprenticeship in Marine Piping and Plumbing.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Create, review, administer and update (monitor & track) construction schedule for project
• Collaborate with other disciplines to collate/provide scheduling data — subcontract change requests, bid comparisons, new work item estimates and resolution of potential schedule/work problems
• Interface and work closely with project team and sub-contractors to ensure required progress
• Liaise with managers and engineers to discuss the progress of the project and address any issues that may arise
• Liaise with external contractors and suppliers to organize the phases of the construction development and scheduling
• Prepare cost estimations and detailed man-hour calculations
• Monitor and track/record work delay/progress and prepare scheduling reports
• Analyze gaps between the planned and actual progress and highlight the areas of concern to project management
• Prepare Project site daily, weekly, and monthly reports and project schedules
• Prepare cost estimation for any additional works and variation order
• Prepare Project site minutes of meeting (MOM) for the current progress meeting and other site meetings
• Any other duties to be assigned from time to time

Pre-requisites:

• Diploma/ Degree in Mechanical Engineering
• Minimum 3 years of experience in a similar role for power plant / industrial plant projects
• Proficient in Primavera P6 and/or MS project
• Candidates with experience in power plant projects will have an added advantage
• Independent and able to communicate effectively at all levels with other disciplines
• Good time management and planning
• Good organizational skills and methodological approach
• Strong attention to details
• Willing to work under pressure and in construction site conditions

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned

Requirement:

• Bachelor’s Degree in Civil Engineering or equivalent
• Able to lead and work independently
• Proficient in Microsoft Office and AutoCAD
• Good communication skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Highlights:

Immediate hiring

Accessible via public transportation

We provide opportunities for career advancement within the company

Benefits:

Working Hours: 8 am-6 pm (6 days)

14 days Annual Leave after confirmation

14 days Medical Leave (completion of 3 months service)

$200 medical claim per year

Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Sales Engineer, Engineering Service & Solutions

Reporting to the Sales Manager, you will be responsible for developing new business opportunities. You are required to generate and develop sales lead leading to creating a customer base. This will include increasing sales revenue and maintaining good relationships with existing customers, gathering and monitoring market information and preparing sale plan to meet targets.

Requirements:

· Degree or Diploma in Electrical Engineering

· Relevant sales experience will be an advantage

· Must be customer oriented and a team player

· Able to work independently and self-motivated

· Must be goal driven and target achievement oriented

· Able to carry out presentations

· Must own a car

· Able to travel when required

Scope of the role

Electrical Engineers apply their skills and expertise to generate solutions that require development or sustainment of new or improved techniques, procedures, or products. Your success includes assisting with planning, conducting, and evaluating approaches to meet project objectives in a timely, cost-effective fashion.

Job Responsibilities

• Analyze, design, develop, and maintain products; assist in commercialization.
• Assist in identifying and organizing requirements. Apply usability procedures and principles at project or product-line level or through customer input.
• Build prototypes, products, and systems for testing; set up and run laboratory simulations.
• Design testing procedures and coordinate testing. Conduct tests, document results, and develop client presentation.
• Conduct and/or participate in technical reviews of requirements, specifications, designs, codes, and other artifacts.
• Evaluate engineering approaches and risks to produce and iterate development plans.
• Train and support clients and field representatives.
• Identify and keep abreast of novel technical concepts and markets.
• Contribute to design standards and support design reuse.
• Author technical reports, papers, articles, presentations, and patents.

Job Requirements

• Master’s, or bachelor’s degree in electrical or electronic engineering
• Excellent verbal and written communication skills in English
• Eagerness to take on challenges and to learn new skills

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

Job Requirements:

• Use AUTOCAD system to draw construction shop drawing
• Provide support on daily operation activities which including office upkeep/maintenance
• Coordinate work arrangement with internal & external stakeholders
• General office support
• Handle sensitive information in confidential manner
• Develop & update administrative systems to make them more efficient
• Documentation and simple processing duties
• Determines project schedule by studying project plan and specifications, calculating time requirements, and sequencing project elements.
• Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems

Job Requirements:

• Knowledge of MS office
• Proactive & able to work
• Able to work in fast paced environment Bachelor’s Degree Engineering (Civil) or equivalent
• Minimum 3 years of Civil Engineering / Structural & AUTOCAD draw experience in related fields
• A proactive and resourceful individual who possess good communication, negotiation and presentation skills
• Good communication and analytical skills, able to interact with people of all levels

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description:

• Collaborate with project managers to develop detailed project plans, including timelines, resources, and budgets.
• Oversee construction activities on-site to ensure compliance with project plans, specifications, and safety regulations.
• Monitor and inspect construction materials and workmanship to ensure adherence to quality standards and project specifications.
• Act as a liaison between project managers, contractors, subcontractors, and other stakeholders to ensure smooth communication and coordination throughout the project lifecycle.
• Identify and address any technical or logistical issues that arise during construction, offering practical solutions to minimize delays or disruptions.
• Maintain accurate and organized documentation of project progress, including daily reports, work logs, and any changes to plans or specifications.
• Enforce and promote strict adherence to safety protocols and regulations, creating a secure work environment for all personnel on-site.
• Monitor project expenditures to ensure they align with the approved budget and make recommendations for cost-saving measures where applicable.
• Regularly update project managers and stakeholders on the status of construction projects, highlighting achievements, challenges, and milestones.
• Collaborate with multidisciplinary teams, including architects, engineers, contractors, and subcontractors, to achieve project goals collectively.

Job Requirements:

• Bachelor's degree in Civil Engineering or related field.
• Proven experience as a Site Engineer or similar role in the construction industry.
• Strong knowledge of construction processes, materials, and methods.
• Familiarity with relevant software tools, including project management and design software.
• Excellent communication and interpersonal skills.
• Attention to detail and problem-solving abilities.
• Ability to work effectively in a fast-paced, deadline-driven environment.
• Strong leadership and decision-making skills.

Job Title: Sales Engineer

Department: Sales

Reports to: Regional Sales Manager

Location: Singapore, Malaysia, Indonesia, Thailand, Vietnam

Job Summary:

The Sales Engineer will be responsible for driving sales, developing business relationships, and providing technical expertise to clients in the fields of interior design, supply and installation, HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting. The ideal candidate will have a strong technical background combined with exceptional sales skills and the ability to work across multiple countries in the Southeast Asian region.

Key Responsibilities:

1. Sales and Business Development:

- Identify and develop new business opportunities within the specified regions.

- Establish and maintain strong relationships with existing and potential clients.

- Conduct market research to understand customer needs, market trends, and competitive landscape.

- Prepare and deliver technical presentations and demonstrations to clients.

2. Technical Expertise:

- Provide clients with technical advice and support on a range of products and services.

- Collaborate with the engineering and product development teams to understand product specifications and capabilities.

- Assist in the customization of products to meet specific client requirements.

3. Project Management:

- Oversee and coordinate the installation and implementation of products and systems.

- Ensure projects are completed on time, within scope, and within budget.

- Liaise with contractors, suppliers, and internal teams to ensure successful project execution.

4. Sales Administration:

- Prepare and present sales proposals, contracts, and agreements.

- Track and report on sales performance and progress against targets.

- Maintain accurate records of customer interactions and transactions in the CRM system.

5. Customer Service:

- Provide post-sales support to ensure customer satisfaction and repeat business.

- Address customer inquiries and resolve issues in a timely and effective manner.

- Gather customer feedback and work with internal teams to improve products and services.

6. Travel:

- Traveling within the designated region to meet clients and manage projects as require.

- Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Qualifications:

- Minimum of 3-5 years of experience in sales engineering or a related technical sales role.

- Sound technical knowledge in one or more of the following areas: HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting.

- Excellent communication, negotiation, and presentation skills.

- Ability to work independently and as part of a team.

- Proficiency in MS Office Suite.

- Ability to travel as require within the region.

Benefits:

- Competitive salary.

- Health and dental insurance.

- Opportunities for professional development and career advancement.

- Travel allowances and reimbursement.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities and Duties

• Assist in the resolution of technical problems.
• Providing on-site and remote technical support.
• Diagnosing, troubleshooting, and repairing of semiconductor equipment.
• Identifying technical problems and making analysis in different Service categories.
• Ensure documentation and data are well recorded into the system in a timely manner.
• To manage spare parts inventory and to ensure sufficient stocks on hand and smooth operations.
• Follow up status of shipment and delivery with Operations Team where required.
• Understanding customer's needs and providing support and solutions.
• To file warranty claims on products with principals and enter claims into the system.
• Gathering / analyzing customer feedback and complaints on equipment breakdown.
• Liaise with the principal concerning product quality-related issues.
• Manage and provide effective leadership to the service team

Requirements

• Candidate must possess at least NiTEC/Diploma/Higher/Graduate Diploma in Electronics and/or Electrical Engineering or equivalent.
• Proficient in handling technical and service-related issues.
• Good communicative skills and a strong sense of responsibility.
• Ability to interact with people of all levels.
• Able to work independently.

Responsibilities

• Responsible for daily operational equipment issues and strategize recovery actions to support production requirement.
• Perform equipment buy-off and qualification for machine installation, modification, upgrade and maintenance.
• Involve in WLCSP process (Taping & Detaping, Wafer Mount, Backgrinding, Laser Grooving, Laser Mark, Dicing, AOI, Die Sort etc)
• Monitor and analyse equipment performance and reliability.

Requirements

• Diploma / Higher NITEC / NITEC in Electronic / Electrical / Mechanical / Mechatronics Engineering or equivalent.
• Tape and Reel experience in wafer level and knowledge on vision system is preferred.
• Possess strong analysis and good teamwork.
• Good communication and interpersonal skills.
• Able to commit to either 12-hr permanent day / night shift.

Job Description:

• Support mechanical design, dynamic modeling, and structural simulations of mechanical systems.
• Contribute to software development for motion controllers using ROS/ROS2.
• Support development of front-end and/or back-end software for UI interfaces using the React framework.
• Participate in project implementation trials related to mobile robot fleet management.
• Support engagement in technical project planning and execution for development projects with industry partners.
• Prepare technical write-ups and presentations of project work.

Requirements:

• Strong knowledge of mechanical systems, particularly in the automotive domain.
• Proficiency in dynamic modeling and structural simulations.
• Experienced with ROS/ROS2 for motion controller development.
• Exposed to front-end and/or back-end software development, particularly using React.
• Understanding the use-cases of mobile robot fleet management.
• Exposed to NoSQL/SQL database management.
• Adequate technical project planning and execution skills.
• Able to perform basic technical writing and presentation abilities.

Minimum Qualifications/Specialization:

• Diploma in mechanical engineering, Mechatronics, Robotics, Computer Science, or a related field.
• Specialization in mechanical systems design and simulation, particularly within the automotive domain.
• Relevant coursework or experience in robotics, control systems, software development (with a focus on ROS/ROS2), and UI/UX design.
• Experience or training in software engineering best practices.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Support mechanical design, dynamic modeling, and structural simulations of mechanical systems.
• Contribute to software development for motion controllers using ROS/ROS2.
• Support development of front-end and/or back-end software for UI interfaces using the React framework.
• Participate in project implementation trials related to mobile robot fleet management.
• Support engagement in technical project planning and execution for development projects with industry partners.
• Prepare technical write-ups and presentations of project work.

Requirements:

• Strong knowledge of mechanical systems, particularly in the automotive domain.
• Proficiency in dynamic modeling and structural simulations.
• Experienced with ROS/ROS2 for motion controller development.
• Exposed to front-end and/or back-end software development, particularly using React.
• Understanding the use-cases of mobile robot fleet management.
• Exposed to NoSQL/SQL database management.
• Adequate technical project planning and execution skills.
• Able to perform basic technical writing and presentation abilities.

Minimum Qualifications/Specialization:

• Diploma in mechanical engineering, Mechatronics, Robotics, Computer Science, or a related field.
• At least 3 years of experience
• Specialization in mechanical systems design and simulation, particularly within the automotive domain.
• Relevant coursework or experience in robotics, control systems, software development (with a focus on ROS/ROS2), and UI/UX design.
• Experience or training in software engineering best practices.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 5-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.