Job description:

• Prepare basic design of heat, mass balance, PFD, P&ID, process calculation for Water & Wastewater, RO, Demin, Pre-Treatment, Biological, Chemical, Produced Water Treatment, Desalination, Electrochlorination, Zero Liquid Discharge, Ammonia/Sulphate Removal, Condensate Polishing, etc. applications.
• Knowledge of equipment sizing, vessel, tank and selection of material, instrumentation, control philosophy, cause and effect matrix, HAZOP, IPF, SIL study, IOM manual, etc.
• Prepare a bill of material for equipment and material and source for manufacturer, supplier and fabricator to build up the costing sheet with quotation and proposed additional AVL.
• Verification of performance guarantee such as process parameters, electrical power, chemical consumption, replacement, etc.
• Preparing datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, Ex-d, ISA standards, codes and regulation.
• Support Tendering team in preparing proposals inline with tender requirements.
• Ensure all costs are captured accurately in the costing file. Review costings and technical solution with Head of Departments.
• Work with commercial and various cross functional teams like SCM, Project Management, Process, Mechanical applicants for supporting the bids in terms of techno-commercial costings and writeups.
• Identify potential risks in the bids, vendor quotations and estimates, and in any related contract agreements across customers/channels.
• Occasional travel to handle customer clarifications.
• Collects and archives documentations regarding the offer/order and records assumptions and decisions taken during the tendering process.

Job requirements:

• Bachelor Degree in Chemical/Environmental Engineering or equivalent.
• Familiar with international standards, codes and regulations, offshore and onshore.
• Minimum 3 years of relevant experience in Oil & Gas, Chemical, Power Plant Industries.
• Meticulous with ability to prioritize work tasks to meet deadlines.
• Good communication and presentation skills.
• Have experience working with international teams.
• Willing to travel.

About MyrLabs

MyrLabs is an A*STAR spin-off that creates cutting edge hardware and algorithms. The MyrLabs team consists of driven and multi-disciplinary engineers dedicated to bringing game-breaking solutions for our partners by innovating at the PCB, firmware, and software levels. We work on problems that academia fears to, cannot, or will not address. These are problems that are difficult and require multi-disciplinary efforts. Our approach focuses on the use of non-mainstream techniques to spark creativity and to solve problems in ways that are not seen before.

Job Brief

We are looking to hire Robot Designer Engineers to join our Robotics Team. This is a position for a research-focused role towards designing, building, and prototyping ground wheeled robots. Our roadmap of planned robots includes small robots (200W x 150D x 200H mm) and large robots (1800W x 1200D x 1800H mm). These robots’ purpose is to showcase our work on cutting edge algorithmic capabilities for robots and new design paradigms for robots. Your work will involve the creation of robots from scratch and enclosures that sit atop existing off-the-shelf robot chassis platform.

This is a difficult job role that will require a mix of design, mechanical engineering, and electrical engineering expertise. While we do not demand for you to possess the entire skillset, you must be willing to acquire the missing skillsets over the course of your employment and commit to becoming a multi-disciplinary engineering staff.

MyrLabs’ intends to create robots that defy existing design norms. We are looking for people who are creative and have the passion to create sophisticated mechanical objects.

Responsibilities

1. Work with the Senior Management Team to conceptualize robots that align with the Company’s roadmap and plans

2. Developing new ideas for robots and presenting them to the Senior Management Team

3. Sketch, CAD, and then realise/produce the concept robots

4. Work with other R&D staff to integrate sensors, computers, and other hardware on the robots

Stance on Skills-based Hiring

MyrLabs has pledged support for the skills-based hiring movement; candidates are assessed based on a ‘skills first’ approach over qualifications. Candidates from ITE or Polytechnics are welcome to apply for the position.

Critical Skills

- Demonstratable expertise in using SOLIDWORKS, Fusion 360, NX, or equivalent professional CAD software

- Demonstratable ability to draw, sketch, create, and present conceptual drawings

- Demonstratable expertise in product design, problem solving, and/or creative thinking

Nice to Haves

- Demonstratable expertise in mechanical engineering, electrical engineering, and/or programming

- Demonstratable ability to conduct focus groups and extract requirements

- Demonstratable knowledge of manufacturing standards and practices

- Demonstratable experience in identifying design, production, material and technology market shifts

After application, please send your resume, MBTI profile, and portfolio of previous work or ideas to [email protected]

You can do a free MBTI test at: https://www.16personalities.com/free-personality-test

Role Purpose:

To independently determine and prepare the Requisitions for packages of mechanical

components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Key Accountabilities:

Technical requirements-

Understands the specifications and requirements in the area of mechanical packaged equipment and system (such as

Chemical Injection package, Scrubber, Utility Compressor,Pumps, etc.,) of the assigned package. - Responsible for Mechanical

Design of packaged equipment in compliance with applicable International codes ASME, API etc.,

Engineering document preparation -

Independently develops technical specifications/standards and Requisitions for packaged equipment and system such as

Chemical Injection package, Scrubber, Utility Compressor, Pumps, etc.,

Supplier selection-

Independently evaluates the technical aspects of bids received from suppliers and concludes assessment to the bide. Generally, less

complex packages and middle risk equipment are assigned.

Supplier management -

Assists in placing and executing the orders. After orders, independently reviews Supplier documents (such as data sheets,

drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakes holders.

Support for other discipline -

Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site

Technical issue resolution -

Independently resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post-delivery.

Compliance with HSSEQ policies -

To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behavior.

Qualifications

- Bachelor’s Degree in Engineering

- Minimum 10 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in FPSO, off-shore application

- Possess relevant experience working on EPC projects

- Shall be conversant with design standards and International Industry Codes such as ASME, API, etc.

- Proficency in written and spoken English and Japaneses.

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

This is a new role within our Operations Team where you will be responsible for autonomous vehicle operations in our customer sites where you will be responsible for Remote Vehicle Operations, Maintenance and Systems testing. where you will be cross-deployed to both the testing and operations team. This role will operate on a shift-based schedule. You will play a crucial role in ensuring the safe and efficient operation of autonomous vehicles, monitoring and controlling real-time vehicle operations, conducting general maintenance and executing testing procedures.

On a day to day, you will be collaborating with cross-functional teams while integrating new technologies, troubleshooting technical issues and contributing to continuous improvement initiatives. Your expertise will be vital in the success of maintaining compliance with safety regulations, optimizing vehicle performance, and fostering innovation in autonomous vehicle operations.

Role responsibilities

Vehicle Maintenance and Testing.

• Conduct diagnostics and maintenance on autonomous vehicles.
• Collaborate with engineering teams to integrate new technologies and features into autonomous vehicle systems.
• Execute testing procedures for autonomous vehicle systems in an operational environment.
• Provide technical support to on-site and remote teams during autonomous vehicle operations.
• Troubleshoot and resolve technical issues promptly to minimize downtime.

Operations Control:

• Monitor and control the real-time operations of autonomous vehicles.
• Execute and manage autonomous vehicle operations to ensure safe and efficient performance.
• Respond promptly to system alerts and emergencies, taking corrective actions as necessary.

Shift Operations:

• Work on a shift-based schedule to ensure 24/7 coverage for autonomous vehicle operations.
• Collaborate with cross-functional teams to maintain continuous and reliable system functionality during all shifts.

Safety and Compliance:

• Ensure strict adherence to safety protocols and compliance with regulatory requirements.
• Collaborate with safety and compliance teams to implement and maintain best practices.

Required experience

• Diploma in relevant field or equivalent experience.
• Proven experience in vehicle/transport operations and testing.
• Strong analytical and problem-solving skills.
• Experience with vehicle/transport technologies and systems.
• Hands-on experience in mechanical systems and electrical/electronic wiring
• Hands-on experience with Linux OS environment.
• Knowledge and background in Robotics/Automation.
• Hands-on experience in Bash, Python, C++ and ROS is a plus.
• Possession of a Class 3 Driving licence is a plus.
• Excellent communication and collaboration skills.
• Ability to adapt in a shift-based and 24/7 working environment.

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

The team aims to spearhead the digital transformation of the government. Our team aims to design and develop software applications that help government agencies better serve the needs of Singaporeans.

What you will be working on:

• Work with a small team of developers to deliver the modules to develop web-based application systems.
• Manage the user-requirements gathering process.
• Participate in the design and development of web applications.
• Assist in the user acceptance testing process.
• Implement, customize, test, document and maintain software applications.
• Ensure that the modules delivered are according to the specifications and are of high quality.

What we look out for:

• A Degree/Diploma in Computer Science or equivalent
• Technical skills include proven object-oriented programming experience with Java, HTML/Javascript and front-end tech stack such ReactJS
• Experience in building cloud native application using Java tech stack and container platform such as Docker, Kubernetes
• Experience in using RDBMS database (e.g. Oracle, MSSQL etc.) and SQL
• Knowledge in .NET tech stack will be an added advantage

Preferred character/ personality traits:

• High expectations of self
• Keen to share knowledge with team mates and mentor fellow developers
• Good communication and interpersonal skills
• Self-driven and independent

Our Infrastructure team works closely with other security consultants to deliver security projects solving challenges and improving security posture for our customers. You will play a part in the team to research, design, architect and implement secure architectures in both Cloud and Onprem Infrastructures to meet performance, reliability, availability and scalability standards. The team adopts DevOps practices using IAC with CI/CD pipelines to improve the agility, consistency and governance of project implementations.

If you are someone with a strong passion in cloud technologies and is a team player who strives in a team setting, we welcome your application!

Key Responsibilities

• Carry out implementation, maintenance, support and operation of the project's cloud & onprem network and infrastructure.
• Maintain understanding of the architecture and work with security team to deliver the required applications and integrations.
• Identity, evaluate and recommend new areas of improvements for the implementation.
• Perform day to day operational task, scheduled change requests, troubleshooting and maintenance of the implementation.
• Develop and maintain code to automate infrastructure for build and maintenance, managing network connectivity, security rules, compliances, cloud images etc meeting security and auditable standards.
• Managing of virtual network appliances and patch management infrastructure for Linux and Windows.
• Support vulnerability assessments by reviewing and providing remediation to the security hardening of the resources.
• Support resource management in the environment helping in cost optimization.
• Involvement in improving and evolving workflow, processes and best practices to increase system maintenance efficiency and security standards.
• Sharing of knowledge through technical documentation, knowledge based articles and sharing sessions with fellow peers in the team.
• Collaborate with relevant parties and provide consultation as a Subject Matter Expert (SME) to deliver final project outcome.

Requirements

• At least 3 years of experience in AWS, Azure and/or GCP, implementing, administrating and managing cloud network and resources (e.g. virtual load balancers, scaling groups, databases, native resource monitoring, backup and recovery, lambda, functions, pub/sub etc)
• At least 2 years of experience in Windows and RedHat Enterprise Linux configuration and troubleshooting
• Working experience in network firewalls and web proxies
• Working experience in powershell, bash and/or python scripting
• Working experience in DevOps/DevSecOps, CI/CD, Ansible, Terraform, Packer or equivalent would be an advantage
• Strong troubleshooting and analytical skills for resolving issues and delivering updates to stakeholders
• Basic project management skills
• Positive working attitude and a team player
• Passionate in information security and keen attitude to learn
• Professional certificates such as AWS Certified SysOps Administrator, Microsoft Certified: Azure Administrator Associate, Google Cloud Associate Cloud Engineer, equivalent or more.
• Professional certificates in Cisco Networking, VMWare, RedHat, MCSE, or equivalent will be an added advantage
• Disciplines in Computer Science, Computer or Electronics Engineering, Information Technology or related qualifications
• Professional certificates such as SANS or ISC2 would be an advantage

We are looking for an experienced senior engineer to be part of the team that design, build and maintain a robust security services platform on Cloud environments. The candidate will be a key technical lead within the Cloud platform team in our System Integration business unit. He will be responsible for the architecture, design, implementation, and maintenance of a cloud-based security platform that meets ISO27001 and SOC2 compliance requirements. The ideal candidate should have hands-on experience in DevSecOps, cloud operations, and the ability to design and implement complex cloud solutions.

Key Responsibilities:

• Work with the Cloud Technical Committee to establish Ensign’s cloud platform architecture and framework for running cloud services
• Collaborate with customers, stakeholders, and cross-functional teams to identify business requirements, design solutions, and create technical architecture and implementation plans
• Take part in reviewing, establishing and refactoring of the polices and framework for the governance of the cloud platform's usage
• Architect, design, and implement a secure and scalable cloud platform for providing security services such as identity and access management, network security, application security, and data protection
• Develop product roadmap for future enhancements of Ensign’s cloud platform
• Develop and maintain technical documentation, including architecture diagrams, design documents, and SOPs to ensure the platform meets compliance requirements
• Design and implement DevSecOps processes for continuous delivery and integration of security services to cloud environments
• Implement and manage cloud infrastructure and services, including virtual machines, containers, networking, and storage services on AWS, Azure, and GCP
• Ensure the platform meets industry standards for security and compliance, such as ISO27001, SOC2, and GDPR
• Provide technical leadership and guidance to the team, including mentoring junior staff, performing code reviews, and ensuring quality control of deliverables
• Participate in technology evaluations and recommendations to ensure the security platform is using the latest cloud technologies and best practices
• Develop and implement disaster recovery and business continuity plans for the security services platform

Qualifications:

• Bachelor's degree in Computer Science, Information Technology or related field
• Minimum of FIVE (5) years of experience in designing and implementing cloud-based solutions on AWS, Azure, and GCP
• Hands-on experience in DevSecOps, cloud operations, and cloud security best practices
• Strong knowledge of security technologies such as identity and access management, network security, application security, and data protection
• Experience in developing and maintaining technical documentation and implementing compliance requirements such as ISO27001, SOC2, and GDPR
• Excellent communication skills, with the ability to communicate technical concepts to non-technical stakeholders
• Strong problem-solving and analytical skills, with the ability to work independently and as part of a team
• Possess cloud certifications such as AWS Solutions Architect Associate, Azure Administrator Associate or GCP Associate Cloud Engineer
• Expert-level cloud certifications such as AWS Solutions Architect Professional, Azure Solutions Architect Expert, or GCP Professional Cloud Architect are a plus

Responsibilities:

• Provide desktop support at customer’s site. This includes installation, repair, servicing, liaising and maintenance of solutions in accordance with the manufacturer’s specifications, to ensure customer satisfaction and service operation are achieved
• Conduct installations based on customer’s requirements and company specifications, from site inspections through to final sign-off and acceptance
• Diagnose and perform repairs on equipment and solutions and ensure that relevant updates and patches are applied accordingly on-site or remote diagnostic procedures at customer’s sites
• Initiate escalation procedures and follow up on all open requests of allocated sites to ensure customer satisfaction
• First level troubleshooting of network connectivity in a LAN/WAN environment
• Responsible for tracking hardware and software inventory and report to asset management team on a regular basis
• Assist in user/hardware movement and office relocations
• Maintain defective equipment/parts in maintenance inventory, document customer repairs, maintain and restock assigned parts inventory to ensure proper spare parts levels
• Provide user data and application recovery
• Maintain IT records and track on areas of responsibilities

Requirements:

• Diploma in Engineering, Computer Science/Information Technology or its equivalent
• At least 1 year of experience in a technical service role
• Technical skills in Microsoft Windows, desktop hardware, desktop software application and network environments

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The ECE department is looking for candidates to conduct research on microarchitectures that support emerging computing paradigms (i.e., brain-inspired or quantum-inspired computing). The candidates will explore microarchitecture designs that support these emerging computing paradigms using a system-technology co-design approach. Tasks involve the exploration of various design aspects across the devices-circuits-systems-architectures-algorithm stacks.

Qualifications

1. Minimum a Bachelor degree in engineering
2. Preferable to have experience in microarchitecture design and use of EDA tools such as Cadence Virtuoso, HSPICE, etc. Experience in nonvolatile device technologies is a plus.
3. Open to Fixed Term Contract

Our Infrastructure team works closely with other security consultants to deliver security projects solving challenges and improving security posture for our customers. You will play a part in the team to research, design, architect and implement secure architectures in both Cloud and Onprem Infrastructures to meet performance, reliability, availability and scalability standards. The team adopts DevOps practices using IAC with CI/CD pipelines to improve the agility, consistency and governance of project implementations.

If you are someone with a strong passion in cloud technologies and is a team player who strives in a team setting, we welcome your application!

Key Responsibilities

• Carry out implementation, maintenance, support and operation of the project's cloud & onprem network and infrastructure.
• Maintain understanding of the architecture and work with security team to deliver the required applications and integrations.
• Identity, evaluate and recommend new areas of improvements for the implementation.
• Perform day to day operational task, scheduled change requests, troubleshooting and maintenance of the implementation.
• Develop and maintain code to automate infrastructure for build and maintenance, managing network connectivity, security rules, compliances, cloud images etc meeting security and auditable standards.
• Managing of virtual network appliances and patch management infrastructure for Linux and Windows.
• Support vulnerability assessments by reviewing and providing remediation to the security hardening of the resources.
• Support resource management in the environment helping in cost optimization.
• Involvement in improving and evolving workflow, processes and best practices to increase system maintenance efficiency and security standards.
• Sharing of knowledge through technical documentation, knowledge based articles and sharing sessions with fellow peers in the team.
• Collaborate with relevant parties and provide consultation as a Subject Matter Expert (SME) to deliver final project outcome.

Requirements

• At least 3 years of experience in AWS, Azure and/or GCP, implementing, administrating and managing cloud network and resources (e.g. virtual load balancers, scaling groups, databases, native resource monitoring, backup and recovery, lambda, functions, pub/sub etc)
• At least 2 years of experience in Windows and RedHat Enterprise Linux configuration and troubleshooting
• Working experience in network firewalls and web proxies
• Working experience in powershell, bash and/or python scripting
• Working experience in DevOps/DevSecOps, CI/CD, Ansible, Terraform, Packer or equivalent would be an advantage
• Strong troubleshooting and analytical skills for resolving issues and delivering updates to stakeholders
• Basic project management skills
• Positive working attitude and a team player
• Passionate in information security and keen attitude to learn
• Professional certificates such as AWS Certified SysOps Administrator, Microsoft Certified: Azure Administrator Associate, Google Cloud Associate Cloud Engineer, equivalent or more.
• Professional certificates in Cisco Networking, VMWare, RedHat, MCSE, or equivalent will be an added advantage
• Disciplines in Computer Science, Computer or Electronics Engineering, Information Technology or related qualifications
• Professional certificates such as SANS or ISC2 would be an advantage

Job Description

Key Responsibilities

• Carry out implementation, maintenance, support and operation of the project's security monitoring use cases and automation playbooks.
• Maintain understanding of the architecture and work with security team to understand the use case and playbooks to be created.
• Identity, evaluate and recommend new areas of improvements for the implementation.
• Perform day to day operational task, scheduled change requests, troubleshooting and maintenance of the implementation.
• Create, finetune and maintain SIEM data sources, use cases, correlation rules and security alerts classifications
• Create, finetune and maintain SOAR playbooks
• Create and maintain UEBA use cases

Requirements

• At least 3 years of experience in security operations in a SOC environment
• At least 2 years of experience in creating, finetuning and maintaining correlation rules and playbooks
• Working experience in powershell, bash and/or python scripting
• Strong troubleshooting and analytical skills for resolving issues and delivering updates to stakeholders
• Basic project management skills
• Positive working attitude and a team player
• Passionate in information security and keen attitude to learn
• Professional certificates such as AWS Certified SysOps Administrator Associate, Microsoft Azure Administrator Associate, GCP Associate Cloud Engineer, equivalent or more.
• Disciplines in Computer Science, Computer or Electronics Engineering, Information Technology or related qualifications
• Professional certificates such as SANS (such as SANS GCDA, GCIA, GDSA, GMON) would be an advantage

Network Lead will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services. Experience in leading a team of 3-5 network engineer. A relevant IT degree and CCIE is preferred.

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Key Responsibilities:

• Perform administration, support and operation of the project's security solution platforms and supporting infrastructure, focusing on Privileged Access Management (PAM), Network Intrusion Prevention System (NIPS), Wireless Intrusion Prevention System (WIPS), Network Access Control (NAC) and common systems (Windows and Linux OS, System Monitoring, Backup, Hypervisors and SAN Storage).
• Prepare professional reports and slide decks for submission to client on operational status
• Attend operational meetings with client
• Maintain and update documentation for operations, including asset lists, account lists, DR and health check plans
• Identity, evaluate and recommend enhancements to operational processes and procedures.
• Execute changes in accordance with the established change management process
• Support key activities including execution of BCP and DRP
• Implement approved service requests from the client within required timelines
• Support vulnerability assessments and remediate findings
• Support investigation of security incidents

Requirements:

• At least 5 years of experience in mid-sized Day 2 operations, out of which at least 2 years in providing technical support and administration of the focused security solutions
• At least 2 years of experience in supporting common systems and infrastructure is preferred
• Strong troubleshooting and analytical skills for resolving issues and delivering updates to stakeholders
• Positive working attitude and a team player
• Strong interpersonal and communication skills, as this role entails 50% of time in client premises

Responsibilities:

• Conduct time and motion studies to identify touch time elements which represent part of manufacturing process across all customer's product models.
• Analyzes data and process to establish the cookbook and compute touch time and non-touch time of each product model through E2E process
• Investigate current processes and drive continuous improvements projects for quality, productivity, and cost effectiveness
• Ensure smooth process flow with high quality, high yield, low cost by working with the respective matric owners to track and achieve the overall committed targets of KPIs
• Work with Senior Engineers to set up process recipes of newly introduced processes or new process equipment or tools.
• Any other ad-hoc duties as assigned in accordance to business needs

Skills and Requirements:

• Diploma/Bachelor’s degree in industrial technology, Manufacturing Engineering Technology, or related field required.
• Minimum 2 years’ experience in manufacturing engineering or relevant field
• Prefer to have Kaizen/Lean manufacturing experiences.
• Excellent in analytical, organizational, and interpersonal skills
• Attention to detail and data accuracy
• Must be a team player and highly motivated.
• Flexibility and ability to change priorities.
• Ability to multi-task with strong sense of urgency; ability to meet deadlines.

OTHER INFO:

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• 
  Working Days / Hours: Normal Shift: 8am - 5.30pm or 8.30am - 6.00pm [Mondays to Fridays]

---------------------------------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

The principal engineer associates in this role, function as information technology (IT) professionals serving as technical experts and participate in or oversee a variety of analytical and technical assignments that provide for problem diagnosis and solutions documentation, implementation, administration, support, and maintenance of a variety of hardware, software, and network products in an information technology infrastructure environment. The role is broadly split between providing day to day operational support for existing infrastructure services and users of those services, and project-based work leading to the development and deployment of new infrastructure services.

Responsibilities

• Provide maintenance and support for the network services
• Experience working in LAN/WAN/WLAN/SDN/SD-WAN/IPS/ISE
• Design, implement, and maintain the organization's network infrastructure, including routers, switches, firewalls, load balancers, and other network components
• Collaborate with cross-functional teams to design network solutions that align with business objectives and ensure scalability, security, and performance
• Configure and optimize network devices to ensure seamless connectivity, data transmission, and network performance
• Troubleshoot and resolve complex network issues, conduct root cause analysis, and implement corrective actions
• Monitor network performance, conduct capacity planning, and implement necessary changes to optimize network performance and ensure high availability
• Implement network security measures, including firewalls, access controls, and monitoring tools, to protect the organization's data and systems
• Maintain accurate and up-to-date network documentation, including network diagrams, configurations, and standard operating procedures
• Stay updated with emerging network technologies, industry trends, and best practices, and make recommendations for continuous improvement
• Develop test cases and conduct proof of concept tests on new software and hardware prior to upgrade/deployment
• Able to perform as the role of Project Lead / Coordinator in project management for small to medium size projects or Service Requests
• Work closely with Project Manager / Service Delivery Manager to fulfil project deliverables and operational request
• Able to establish TAC cases with the principal vendor for complex problem until its resolved
• Able to work independently

• Bachelors degree in computer science, Information Technology, or a related field
• 7 or more years of experience as a Network Engineer, with a focus on designing, implementing, and maintaining complex network infrastructures
• Strong knowledge of network protocols, and advanced in routing protocols such as (BGP, OSPF)
• Proficient in configuring and troubleshooting various network devices
• Knowledge of advanced multicast routing and QOS is a plus
• Experience with network security technologies, including firewalls, IDS/IPS, NAC, Web proxy and VPN technologies
• Relevant network certifications such as CCNP. CCIE is a plus
• Solid understanding of network monitoring tools and protocols
• Experience with Software Define Network technologies such as Cisco ACI is a plus
• Strong analytical and problem-solving skills, with the ability to diagnose and resolve complex network issues
• Excellent communication and collaboration skills to work effectively with cross-functional teams and stakeholders

JOB DESCRIPTION:

• Control FPSO TOPSIDE engineering work including Detail Engineering Subcontractors, EPC package supplier, and supplier documents.
• Prepare and keep detail Engineering Procurement Construction Integration (EPCI) schedule for topside in FPSO project.
• Overall responsibility for all project activities under assigned scope management of discipline in engineering, procurement and construction Integration.
• Coordinate and follow up with design disciplines with emphasis on flow of inputs between design disciplines and highlight critical problems to head of disciplines and engineering managers.
• Review project/technical specifications for FPSO topside engineering.
• Manage detail engineering subcontractor’s quality and schedule during FPSO topside detail engineering stage.
• Support to establishing project control systems for the project schedule and cost. This includes development of the project baselines.
• Assist Project Manager and Project Control Manager to prepare the job execution plan in the parts related with engineering schedule, budget and resource planning.
• Set-up and maintenance of control work includes - scope monitoring (scope of works and supply in the Contract and those in the agreements among Joint Venture/Consortium, Sub-contractors), change order management, Overall Schedule Management, Risk Management (Risk identifications, monitoring and mitigation), Project Reporting.
• Set-up and maintenance of Letter Management System and Electronic Document Management System includes – establishing information exchange flow and document exchange flow among Joint Venture/Consortium, Vendor and Sub-contractor.
• Hold, manage and attend regular (weekly, monthly, progress) and key meetings within Project and with other engineering design disciplines to understand design issues and work out satisfactory solutions.
• Develop and coordinate the reporting system and reflect to the project.

JOB REQUIREMENT:

• Bachelor’s degree in department of Chemical Engineering.
• Minimum 6 years of working experiences in project management department for engineering company.
• At least a 1 year of working experiences in FPSO related project.
• At least 2 years of working experience as Project engineer in design office and construction site for Power Plant Project.
• Willing to travel and/or station in module fabrication yard, structure pre-fabrication shop, detail engineering subcontractor’s office as project engineer.
• Familiar and aware of collaboration between inter-discipline engineering activities with proactive mind.
• Familiar with scheduling software such as MS Project.
• Must be familiar with Electronic Document Management System such as TeamBinder.
• Familiar with material control system such as SPMat.

Job Description Summary

Our Security Solutions team works closely with other security engineers to deliver security solutions to the project for our customers. You will play a part in the team to research, design, architect and implement security solutions such as Endpoint Protection, Endpoint Detection and Response (EDR), SIEM, SOAR, Threat Intel Platform, etc.

If you are someone with a strong passion in security technologies and is a team player who strives in a team setting, we welcome your application!

Key Responsibilities

• Carry out implementation, maintenance, support and operation of the project's security solution platforms.
• Maintain understanding of the architecture and work with security team to understand the use case and playbooks to be created.
• Identity, evaluate and recommend new areas of improvements for the implementation.
• Perform day to day operational task, scheduled change requests, troubleshooting and maintenance of the implementation.
• Develop and maintain automation infrastructure for build and maintenance of security solutions
• Managing of security solutions, including patch management such security solutions.
• Support vulnerability assessments by reviewing and providing remediation to the security hardening of the security solutions.
• Involvement in improving and evolving workflow, processes and best practices to increase system maintenance efficiency and security standards.
• Sharing of knowledge through technical documentation, knowledge based articles and sharing sessions with fellow peers in the team.
• Collaborate with relevant parties and provide consultation as a Subject Matter Expert (SME) to deliver final project outcome
• Reviewing and finetuning firewall rules and IPS signatures for enhanced security controls
• Test and update Endpoint Protection and EDR signatures
• Extracting quarantined malware for reverse engineering
• Creating and maintaining EDR blacklist
• Onboarding new log sources to SIEM and Data Lake
• Crating and maintaining log parsers / data flow for onboarded logs

Requirements

• At least 3 years of experience in providing technical support and administration of the security solutions (Endpoint Protection, EDR, SIEM, SOAR, Threat Intel Platform, etc)
• Working experience in powershell, bash and/or python scripting
• Strong troubleshooting and analytical skills for resolving issues and delivering updates to stakeholders
• Basic project management skills
• Positive working attitude and a team player
• Passionate in information security and keen attitude to learn
• Professional certificates such as SIEM Certified Administrator, SIEM Certified Architect, SOAR Certified Administrator, equivalent or more.
• Professional training or certificates in Splunk, McAfee, Carbon Black, Anomali, RSA SecurID will be an added advantage
• Disciplines in Computer Science, Computer or Electronics Engineering, Information Technology or related qualifications

This role involves a blend of technical expertise, customer service, and sales support, ensuring optimal use of our ITCH operations.

Key Responsibilities:

- Client Support: Assist clients in understanding and utilizing data from ITCH operations.

- Address any queries or issues, ensuring a high level of customer satisfaction.

- Optimization of ITCH Operations: Guide clients in enhancing the efficiency and effectiveness of ITCH operations.

- Claims and Warranty Assistance: Provide support in the event of claims and manage warranty-related issues.

- Technical Demonstrations: Conduct on-site demonstrations of equipment for crew members when ships are in port.

- Onboard Trials: Join ships on voyages to demonstrate the ITCH system in action, showcasing its features and benefits.

- Sales Support: To assist the regional sales director and colleagues with sales-related activities to drive regional growth, when not engaged in the above activities.

Qualifications:

- At least 1 to 2 years in operational roles within Maritime / Shipping industries. Ex ship-cadets are welcome to apply.

- Professional technical maritime certificates, or Diploma in Marine Engineering.

- Technical proficiency, with the ability to understand and operate equipment.

- Strong problem-solving and customer service skills.Willingness to travel, including joining ships for voyages.

- Good communication and presentation skills.

- Collaborative mindset, able to work closely with the sales team.

- Benefits:Opportunity to be a part of a dynamic and innovative team.

- Exposure to diverse regions and maritime operations.

- Competitive salary and benefits package.

Employment Type
Full-time

Edit job description

Job Responsibilities:-

• Responsible for toplevel and blocks whose complexity is at the limit of current tool capacity
• Responsible for all aspects of physical implementation, include floor-planning, physical synthesis, clock-tree synthesis, parasitic extraction
• Responsible for IO ring design and bump implementation, meeting ESD, EMI and SSO requirements
• Implementation of Low power layout methodology (multiple switchable power domains, level shifter)
• Execution of static and dynamic drop, ramp up analysis using Redhawk
• Perform static timing analysis to handle complex timing closure
• Work with other design engineer in Synthesis, Design for Testability, STA/timing closure and Equivalent checks to resolve issues

Job Requirements:-

• Master’s/Bachelor’s Degree in Electrical/Electronics Engineering with an emphasis in IC design with minimum 5 years or more related experience
• Experience with complex Low Power SOC in 16nm/7nm, 5nm is a plus
• Good experience with Cadence or Synopsys implementation tool (Tempus, Innovus, DC, ICC2, Fusion Compiler), experience with Cadence implementation tool is a plus
• Experience in Mentor Verification tool, Calibre
• Experience in Redhawk
• Proficient in TCL code, python knowledge is a plus
• Able to work in a multi-cultural team with a strong drive to excel
• Good written and communication skills

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Responsibilities:

• Translate software requirements based on business logic into concise programming code for new application
• Perform code maintenance for existing applications
• Increase program efficiency and adapting to new requirement, as necessary
• Work with team to plan program code enhancements and changes
• Conduct feasibility study on upcoming SIEM technology
• Work closely with clients and team members to understand the departmental stakeholder requirements that drive the analysis and design of quality technical solutions
• Responsible for the design and implementation of applications’ build, release, deployment, and configuration activities
• Work with internal business partners to gather requirements, prototyping, architecting, implementing/updating solutions, building and executing test plans, performing quality reviews, managing operations, and triaging and fixing operational issues
• DevSecOps Engineers require the ability to interact, develop, engineer, and communicate collaboratively at the highest technical levels with clients, vendors and partners
• Participate actively in any ad-hoc projects and tasks as assigned by your supervisor

Requirements:

• Some experience and proficiency in Python or Java would be advantageous
• Working knowledge of database in MS SQL or any RDBMS
• Must be able to adjust to constant business change; common types of changes include new requirements, evolving goals and strategies, and emerging technologies
• Familiar with Microsoft Windows operation and development
• Working knowledge in IP data networks
• Good team player
• Good Communication and writing skills
• Demonstrated ability to work with people at all levels within an organization.

Roles & Responsibilities

Job Description & Requirements

Be involved in the planning of civil engineering works.

To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

Any ad-hoc duties as assigned by the Manager.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

The Senior Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

What You Will Do:

• Under the supervision of an experienced engineer or engineering manager, performs detailed engineering review of plans as assigned for compliance with applicable Rules, Regulations and contract commitments.
• Performs work which involves conventional engineering practices but may include moderately complex problems such as the resolution of conflicting design requirements, material standards or coordination of activities among other disciplines.
• Drafts technically accurate and timely reports, and responses to client letters, faxes and other forms of communication for review by an experienced engineer or engineering manager.
• Prepares accurate and timely weekly reports and billing on all work performed.
• Communicates the status of the current workload to all appropriate members of the team to ensure the needs of the clients will be met.
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Works as a team member within the group. May work autonomously, once trained, with minimal supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering, Marine, Mechanical, or Electrical Engineering, or other related disciplines; an M.S. is preferred.
• Graduate from University and a minimum of five (5) years of related industry experience.
• Preference for graduates from a marine-industry-recognized college or university.
• Experience in international business and technical processes, as well as international requirements and problem resolution, is necessary.
• International experience or knowledge of international business and related technical processes, requirements, and problem-solving skills.

For those with Hull backgrounds

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering or other related disciplines; an M.S. may be preferred.
• Demonstrated computer literacy in engineering software.
• Exposed to Finite Element Method (course work or supervised research).
• For those with seven (7) years or less Machinery backgrounds or experience
• B.S. degree in Marine, Mechanical or Electrical Engineering or other related disciplines.

For those with Machinery backgrounds

• Seven (7) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society or
• Seagoing engineering license or professional/chartered engineer license and four (4) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others.
• Familiarity with the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).

JOB DESCRIPTION

l Prepare basic design document including system study report, heat balance, piping and instrument diagram, equipment data sheet, etc. of power plant

l Independently handle kinds of Package equipment ; GTG(gas turbine generator), STG(steam turbine generator), boiler, HRSG(heat recovery steam generator), water treatment package, wastewater treatment package, surface condenser, nitrogen generator unit, cooling tower, chemical dosing unit, etc.

l Take the lead in the preparation of inquiry packages, in the technical clarification/evaluation of Vendor’s technical offers, and in the kick-off meeting/pre-inspection meeting with an inter-discipline collaboration.

l Prepare technical specifications including package equipment data sheets, detail design documentation & Inspection/Procedure documentation requests for Package equipment as shown the above.

l Prepare technical bid evaluation and clarification with Vendors for technical confirmation for package equipment as show the above.

l Review of the vendor packages and follow up on the required approvals.

l Prepare interface list for package and client requirements

l Follow up of all engineering issues for module engineering and close any outstanding issues as promptly as possible.

l Review / approve vendor documents in line with client / contractor’s requirements.

l Attend project meeting / follow up meeting with vendors, client, third party etc.

l Witness factory acceptance tests (FATs) along with client / contractor’s requirements.

l Assist construction team during module fabrication, equipment installation, and assist the pre-commissioning and commissioning team during yard testing.

l Assist procurement team as required during the ordering stage.

l Have skill of combined cycle system analysis software (GT pro. and Master) and calculation program of steam/water condition (steam calc.)

l Have skill of DX tools such as data analysis software (Grafana and Tableau), document search software (Goldfire), Microsoft 365 and document revision analysis (Middle)

l Have made programs and been used inter discipline, e.g., combustion calc., acid due point calc., HRSG and condenser heating surface calc., chemical dosing calc., piping pressure drop calc., coal characteristic analysis, etc.

Have experience as a lead engineer more than 35 years for large scale project for oil & gas project, petrochemical project and refinery project each project with more than 3,000 drawings.

l Have knowledge about applicable international codes such as ASTME, ASTM, EN, BS, VGB, ISO, IEC, NFPA, API, JIS, Gost and GB

Qualifications:

Bachelor’s Degree in Mechanical Engineering

At least 8years of experience as Design Engineer in Mechanical Engineering of Oil & Gas Plant, Petrochemical and Refinery, and in Basic Engineering of Power Plant.

l Bachelor’s Degree in Mechanical Engineering

At least 40 years of experience as Design Engineer in Mechanical Engineering of Oil & Gas Plant, Petrochemical and Refinery, and in Basic Engineering of Power Plant

JOB DESCRIPTION:

- Pressure vessel and tank design in accordance with ASME Boiler & Pressure vessel Code section II, VIII (Div.1 & 2) and IX, API 650 TEMA, JIS B8265 and JPI.

- Take the vendor’s technical quotation review, clarification and evaluation, leading the kick-off meeting/design review meeting, supporting the pre-inspection meeting, coordinating with other disciplines (Project, Process, Civil, Piping, Electric, Instrument, Transportation, Construction, etc.).

- Prepare Requisition including basic technical requirements, detail design requirements, general documentation requirements, inspection and procedure requirements, etc.

- Evaluate performance of vendor’s design equipment such like plate heat exchangers, filters, drum, etc.

- Review vendor package design including 3D model (Navis Works) and follow up on the required approvals.

- Review / approve vendor documents in line with client / contractor’s requirements.

- Follow up of all engineering issues and close any outstanding issues as promptly as possible.

- Monitor and control vendor’s document submission status. Expedite vendor if any delay.

- Coordination with vendors and global project disciplines for the proper execution of the project.

- Attend project meeting / follow up meeting with vendors, client, third party etc.

- Review thermal rating result of shell & tube heat exchangers in performance point of view.

- Discuss technical issue in design review meeting with vendor to close comments of vendor documents for equipment including package items.

- Assist site team during construction and commissioning stage

- Conduct trouble shooting, investigate root cause, propose countermeasure.

- Assist procurement team as required during the ordering stage.

- Vendor qualification work including check of Design/QAQC/Fabrication capability, vendor’s experience, fabrication sequence & typical schedule, work load, etc.

JOB REQUIREMENTS

- Master’s Degree in Mechanical Engineering.

- More than 5 years of experience as Design Engineer in Pressure Vessel Engineering field in Chemical Plant

- Work experiences at Chemical Plant site in Singapore as field engineer for 6 months and worked for pre-commissioning/progress monitoring for Static equipment and equipment preservation. Communication with vendor supervisor.

- Inspection experience of Static Equipment (Carbon Steel Drum, Stainless Steel Drum and FRP Tank etc.) at vendor’s shop.

- Contribution as a lead engineer for static equipment design for any types of projects such as feasibility study, FEED, EPC and proposal work also.

- Communication with global office engineers.

- Strong engineering knowledge in static equipment for high pressure/temperature, various materials types (carbon steel, stainless steel, duplex stainless steel, etc.), various material constructions (clad/weld overlay/lining/mono-wall/multi-wall), welding including tube-to-tube sheet and dissimilar welding.

- Familiar and aware of collaboration between inter-discipline engineering activities.

- Attendance of 2-weeks Welding Training at Hitachi Zosen Corporation in Kumamoto, Japan, experience of actual welding work (SMAW, SAW, FCAW, TIG) and non-destructive examination for weld joint (PT, MT, UT, RT).

- Speaks and write proficent English and Japanese

Responsibilities:

• Provide basic support to end-users and application teams for security tools, including installation, configuration, and troubleshooting.
• Collaborate with vendors to acquire necessary updates, patches, and support for security tools.
• Assist in monitoring security tool alerts and notifications, escalating potential issues to the appropriate teams when necessary.
• Maintain an up-to-date inventory of all IT security tools, including antivirus software, EDR, microsegmentation, and other security solutions.
• Regularly reconcile security tools inventory with active licenses and installations to identify discrepancies and ensure accurate asset management.
• Generate reports on tool inventory, license status, and reconciliation results for management and compliance purposes.
• Maintain organized records of reconciliation activities, updates, and communications with vendors.

Qualifications:

• Basic understanding of IT security principles and practices.
• Strong organizational and documentation skills.
• Attention to detail and a focus on accuracy.
• Familiarity with IT security tools and their functions.
• Effective communication skills to collaborate with internal teams and vendors.