Total 20,707 structural engineer job vacancies in Engineering category in Singapore

Job Responsibilities

• As an Equipment Owner able to evaluates, selects, and make justification for equipment that is most appropriate and cost effective for the manufacture of company products.
• Oversees the installation, modification, upgrade, and maintenance of manufacturing equipment.
• Liaise with vendors to resolve equipment issues and manage/drive vendors' performance to meet/exceed equipment KPI, MTTR, MTBF and goals.
• Establishes projects and solutions for increasing uptime, throughput, cost saving and resolve equipment problems that affect the manufacturing process.
• Ability to review Process SPC data, setup equipment FDC and machine control. Experienced in Fabguard application. Improve and meet the equipment FDC OOC rate for equipment SECS/GEM capable.
• Provides technical support to the manufacturing equipment repair and process engineering organizations.
• Defines and writes preventative maintenance procedures and schedules.
• Conduct training to shift members (PM operator, Technician & Engineers).
• Able to coach shift engineer in performing hardware trouble shooting, generate troubleshoot lesson learnt material and equipment OCAP for sharing with Team.

Job Requirements

• Diploma with minimum 5years relevant working experiences or bachelor’s degree in electrical/Electronics/Mechanical Engineering.
• Had minimum 3~6 experienced in SUSS, TEL Track, SCREEN, EVG equipment.
• Additional experienced in exposure equipment will be added value.
• Able to perform overtime work (if require), including working in a cleanroom environment.
• Able to work well with minimal supervision and ability to prioritize tasks and follow specific procedures.
• Strong technical skills and knowledge of semiconductor processing and process equipment (Lithography)
• Experienced in repair and maintain a variety of Wafer Bonder, Developer, Coater equipment operation and related issues.
• Have strong technical writing skill of equipment procedure, 8D, FMEA, RA, Incident Report. Ability to work with cross department on any ICAR/8D closure with proper measure implementation.
• Knowledge of using tools to diagnose, resolve the issue (e.g., Multimeter, flow meter, TC wafer, TRH data logger and hand tools).
• Experienced in equipment purchase requirement review with cross department, on new equipment purchasing.
• Strong communication and interpersonal skill.
• Strong initiative and work independent with result driven mindset.
• Must Possess Positive attitude & Team Player

Responsibilities:

• Perform troubleshooting, assist in investigation and resolving production issues
• Identify and implement continuous process improvement and cost control initiatives
• Trending for process parameters
• Manage capability setup for new equipment and processes
• Carry out tolling review and control and submission of capability declaration
• Handle proper documentation for publication review, worksheet amendments and in-house specifications amendments
• Provide technical support to Operations, ensuring productivity efficiency
• Review, investigate and provide solutions to issues raised by Operation
• Carry out training on repair processes and any other related practices

Requirements:

• Degree or equivalent, preferably with experiences in propulsion engines and components MRO facility
• Ability to interpret engineering drawings
• Prior experience in repair processes will be an added advantage
• Familiar with NDT requirements and FAA 45 /EASA 145 regulations

• Evaluate design package and prepare shop drawing of RC structural works and temporary works.
• Liaise structural design works with design-relevant counter parties and construction team.
• Design of temporary works related to structural design.
• Lead the project department in solving design related matters.
• Manage production, quality, design & engineering and schedule issue.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 5 years of civil & structural works experience in Infrastructure/LTA Projects.
• Proficient in STADD, AutoCAD, MicroStation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

· Planning, coordination, and execution of substation automation projects.

· Design, costing and integration of substation automation systems according to project requirements.

· Installation, testing and troubleshooting of substation automation systems at site.

· Preparation of project documents and drawings.

Requirements:

· Diploma in Electrical Engineering/Computer Engineering

· Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Meals and Transport provided !!
• Working hours: 8.30am to 5.30pm
• Salary: Basic up to $2,400
• Location: Clementi

Job scope:

• Weighing scales and labelling raw materials.
• To support compounding fragrances according to predetermined formulation.

Job requirement:

-Min Nitec / Diploma in Engineering (Chemical, Mechatronic, EEE, Electronic, Manufacturing etc.)
-Entry Level position, training provided


By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Loh Pooi Keng (Ashley) - Outsourcing Team
ScienTec Consulting Pte Ltd – 11C5781

Responsibilities:

• Supervision of Electrical Equipment testing and commissioning at site
• Review and submission of site acceptance test reports.
• Review Single Line Diagrams and Electrical Schematic Drawings.
• Assist in Electrical Equipment Installation Inspections.
• Attend Site Activities and Meetings involving clients and contractors.
• Undertake tasks / assignments as and when directed by the Commissioning Lead.

Requirements:

• Diploma/Degree in Electrical/ Mechatronic Engineering.
• Minimum 2 Years in the related field and understand singapore regulatory
• Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commmissioning, Maintenance Testing) will be an added advantage.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Job Description

• Track and Monitor the site progress based on the approved programme.
• Track and report any issue hindering the progress to the line manager.
• Manage subcontractors to ensure timely delivery of works as planned.
• Liaise with different discipline to for pre-pour clearances and inspections.

Requirements

• Degree in Civil Engineering or equivalent.
• Min 2 years experience in building/ construction (C&S work).
• Fresh Graduates are welcome to apply
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Our client provides products and solutions to hospitals in Singapore.

• Develop and execute validation protocols for washers and sterilizers used in hospital settings.
• Support regulatory submissions and inspections, providing necessary documentation and evidence of compliance.
• Ensure documentation is complete, accurate, and audit-ready.

Requirements:

• Degree in Biomedical Engineering
• At least 2 years experience testing Central Sterile Supply Departments and/or water treatment systems.
• Excellent analytical, problem-solving, and communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Job Description:

• Responsible for the supervision of Electrical Equipment testing and commissioning at site, review and submission of site acceptance test reports.
• Review Single Line Diagrams and Electrical Schematic Drawings.
• Assist in Electrical Equipment Installation Inspections.
• Attend to Site Activities and Meetings involving clients and contractors.
• To undertake tasks / assignments as and when directed by the Commissioning Lead.

Job Requirements:

• Candidate must possess at least Diploma in Electrical Engineering.
• At least 2 Years of local working experience in the related field is required for this position.
• Possess initiative and capable of multi-tasking in a fast paced environment.
• Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commmissioning, Maintenance Testing) will be an added advantage.

To Apply, kindly click on the "APPLY NOW" button and job details. We regret that only shortlisted candidates will be notified.

Daniel Lim | Registration Number: R24124455 | AlwaysHired Pte Ltd

EA Licence No: 24C2293

• The Mechanical Engineer will oversee the on-site mechanical systems installation, ensuring that all works are carried out efficiently, meet quality standards, and adhere to project timelines. You will coordinate with the main contractor, consultants, and other subcontractors to ensure smooth project execution.

Key Responsibilities:

• Manage and coordinate the installation of mechanical systems, including HVAC, piping, and fire protection systems, in data centers and critical facilities.
• Ensure all mechanical works are executed according to project specifications, safety standards, and quality requirements.
• Liaise with project managers, consultants, and subcontractors to ensure smooth communication and progress on site.
• Monitor and track work schedules, ensuring timely completion of tasks.
• Provide technical support and resolve on-site issues as they arise.
• Conduct inspections to ensure compliance with safety and regulatory standards.

Qualifications:

• Bachelor’s Degree or Diploma in Mechanical Engineering or a related field.
• Min. 3 years of experience in mechanical engineering, particularly in data centers or critical facilities projects.
• Strong understanding of mechanical systems installation, including HVAC and piping.
• Ability to work closely with site teams, subcontractors, and consultants.
• Excellent problem-solving skills and attention to detail.
• Familiarity with safety regulations and site management.

To Apply, kindly click on the "APPLY NOW" button and job details. We regret that only shortlisted candidates will be notified.

Daniel Lim | Registration Number: R24124455 | AlwaysHired Pte Ltd

EA Licence No: 24C2293

Position Overview:

• The Electrical Engineer will be responsible for designing, developing, and overseeing the implementation of electrical systems for new-build residential and commercial projects. The role involves close collaboration with various stakeholders to ensure that designs are compliant, efficient, and meet the highest industry standards. Candidates must have a minimum of 5 years of relevant experience.

Key Responsibilities:

• Design and develop electrical systems for greenfield residential and commercial projects, including power distribution, lighting, and communication systems.
• Prepare electrical schematics, layouts, calculations, and specifications to meet project requirements and local regulations.
• Collaborate with architects, mechanical engineers, and other stakeholders to ensure electrical systems are seamlessly integrated.
• Conduct site inspections to ensure installation aligns with design specifications, safety codes, and quality standards.
• Manage project timelines, deliverables, and budgets related to electrical engineering work.
• Stay updated with industry trends, technologies, and sustainable electrical design practices.

Qualifications:

• Bachelor’s degree in Electrical Engineering or related field.
• Minimum 5 years of experience in electrical engineering, particularly in greenfield residential and commercial building projects.
• Strong proficiency in electrical design software (e.g., AutoCAD, Revit).
• Knowledge of electrical codes, sustainability standards, and energy-efficient designs.
• Excellent communication, problem-solving, and project management skills.
• Ability to handle multiple projects simultaneously and meet deadlines.

To Apply, kindly click on the "APPLY NOW" button and job details. We regret that only shortlisted candidates will be notified.

Daniel Lim | Registration Number: R24124455 | AlwaysHired Pte Ltd

EA Licence No: 24C2293

Job Responsibilities

• Perform Lead Engineer's Role for Rotating Equipment/Packages on Offshore Projects
• Responsible for the design and selection of speciality rotating equipment on EPC projects like Process gas Compressors, Gas Turbines, Sea Water Injection Pumps, etc. through the various engineering work phases (i.e. Feasibility studies, conceptual design, FEED studies, and detailed engineering for Offshore, FPSO and LNG Projects)
• Responsible for the selection of speciality rotating equipment on EPC projects like Process gas Compressors, Gas Turbines, Sea Water Injection Pumps etc. in compliance with International API codes and Client Specification requirements
• Responsible for preparing technical specifications and data sheets for speciality rotating equipment and packages, such as Gas Turbine Generator, Centrifugal Compressors, Screw Compressor Packages, Sea Water Injection Pumps, Reciprocating Compressors etc
• Responsible for the complete Requisitioning of speciality rotating equipment and packages
• Coordinates work with inter-disciplines, clients and suppliers
• Responsible for the technical evaluation of Bids, prepares technical bid tabulation reports by interacting with Suppliers, clients and inter disciplines
• Participates in HAZID, HAZOP, and Model Review studies for packages, coordinates and closes out Mechanical related issues
• Performs vendor document and design reviews for speciality rotating equipment and packages

Job Requirements

• Degree in Mechanical Engineering
• Minimum 15 years of Offshore Project experience (Wellhead, Fixed Platforms and FPSO) is preferred
• Possess relevant experience working on EPC projects with reputed International clients, with a minimum of two Offshore Projects as Lead Engineer
• Well conversant with International Industry Codes such as ASME, API etc
• Should possess coordination and good oral and written communication skills
• Familiarity with Norsok Requirements and U.K. standards and regulations will be an added advantage, especially since the FPSO will operate in U.K. waters and must conform to certification requirements

Responsibilities

• Develop Manufacturing/Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe/Models.
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensuring the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians on the process and procedures as required.
• Ensure we adhere to our approved procedures and update these as required.
• Own one or more multiple equipment/GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Requirements

• Degree in Engineering, preferably in Chemical Engineering or Degree in Science with major in Chemistry.
• Preferably 2-3 years’ experience in a relevant Pharmaceutical manufacturing environment.
• Able to commit to 1 Year Contract

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Description

• Track and Monitor the site progress based on the approved programme.
• Track and report any issue hindering the progress to the line manager.
• Manage subcontractors to ensure timely delivery of works as planned.
• Liaise with different discipline to for pre-pour clearances and inspections.

Requirements

• Degree in Civil Engineering or equivalent.
• Min 2 years experience in building/ construction (C&S work).
• Fresh Graduates are welcome to apply
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Up to 4K

Location: tuas

Transport Pick Up: Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun

Shiftwork

• Develop Standard Operating Procedures (SOPs) for key support systems.
• Maintain and troubleshoot key support systems.
• Investigate and resolve quality and EHS issues.
• Implement and monitor preventive measures.
• Ensure compliance with site safety and quality standards.
• Identify and implement system improvements.
• Communicate process updates to plant personnel.
• Train process technicians on procedures.
• Ensure adherence to procedures and update as needed.
• Act as the subject matter expert and system owner.
• Present systems to auditors.
• Collaborate with cross-functional teams.
• Participate in annual shutdown maintenance activities.
• Assist in budgeting and managing operation consumables.
• Develop and implement solutions.
• Uphold company code of conduct and values.

Requirement

• Min. Bachelor’s Degree in Chemical Engineering / Chemical and Biomolecular Engineering etc.
• Has prior Laboratory experience (testing, data reviewing, etc.)
• Experience with Laboratory Information Management System (LIMS) and Quality Tracking System
• Basic functional and technical knowledge
• Demonstrated leadership ability
• Good organizational skills and attention to detail
• Indirect leadership experience (e.g., project lead, training lead)
• Proficiency in computerized systems

Interested candidates, do submit your resume in Word document to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]

• Address: Changi
• 5 days 9am to 6pm
• $3500 to $5000

Requirements

• Diploma / Degree in an engineering discipline
• Minimum 3 years of experience in manufacturing industries with an automation background.
• A proven record of accomplishment in automation work will be advantageous.
• Required hands-on experience and remote support.

Key Responsibilities:

General Equipment

• Identifies or addresses malfunctions of plant operational equipment. Proactively involved in identifying the defects in the operational equipment and finding out ways in which can be rectified.
• Monitors plant equipment operation and performance, adjusting to performance specifications.
• Communicates the status of operating equipment to production supervisors or managers.
• Maintain logs and reports. work requests, or other records of work performed in the plant.
• propose improvements to prevent the re-occurrence of trouble, and target set not more than 3 times similar incidents.
• Coordinate with all contractors/supplies for in-house periodic maintenance including plant facilities and repairs.

PLC & Software

• Able to read and write Siemens S7 PLC & HMI codes.
• Knowledge of serial communication.
• Knowledge of programming languages

Other Operational Duties

• Maintain proper documentation
• Housekeeping of spare parts, tools, and accessories.
• Initiate and participate in continuous improvement projects as assigned by Managers.

Competencies

• Electrical design and drawing.
• Install, calibrate, program modification, operate, and simulate the industrial Robot such as FANUS using Siemens S7 PLC, and HMI.
• Work with Suppliers and Vendors to determine the selection of proper components.
• Perform installations/commissioning of machine/robot.

Travel:

Travel for this position is up to 30%.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

• Address: Changi
• 5 days 9am to 6pm
• $3500 to $5000

Requirements

• Diploma / Degree in an engineering discipline
• Minimum 3 years of experience in manufacturing industries with an automation background.
• A proven record of accomplishment in automation work will be advantageous.
• Required hands-on experience and remote support.

Key Responsibilities:

General Equipment

• Identifies or addresses malfunctions of plant operational equipment. Proactively involved in identifying the defects in the operational equipment and finding out ways in which can be rectified.
• Monitors plant equipment operation and performance, adjusting to performance specifications.
• Communicates the status of operating equipment to production supervisors or managers.
• Maintain logs and reports. work requests, or other records of work performed in the plant.
• propose improvements to prevent the re-occurrence of trouble, and target set not more than 3 times similar incidents.
• Coordinate with all contractors/supplies for in-house periodic maintenance including plant facilities and repairs.

PLC & Software

• Able to read and write Siemens S7 PLC & HMI codes.
• Knowledge of serial communication.
• Knowledge of programming languages

Other Operational Duties

• Maintain proper documentation
• Housekeeping of spare parts, tools, and accessories.
• Initiate and participate in continuous improvement projects as assigned by Managers.

Competencies

• Electrical design and drawing.
• Install, calibrate, program modification, operate, and simulate the industrial Robot such as FANUS using Siemens S7 PLC, and HMI.
• Work with Suppliers and Vendors to determine the selection of proper components.
• Perform installations/commissioning of machine/robot.

Travel:

Travel for this position is up to 30%.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior / Associate Engineer to be part of our Thin Film diverse team of talent. You will support the running of Production and ensure equipment readiness and worthiness for production.

What you will be working on:

• To assist Thin Film equipment engineers to sustain equipment performance and perform schedule & adhoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assist new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment.
• Some knowledge in Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Location: Henderson Road

Working Hour: 5 Days work Week 9AM – 6PM

Salary: $4,500 - $5,000

Job Scope

• Be the primary technical contact for customers and in house repair jobs
• Assist customers in the repair and maintenance activities, but also with Providing spare parts and associate services
• Identify and translate customers’ requests ;
• Handle technical incidents and establish reports (troubleshooting, expertise, gathering useful information for analysis
• Guarantee, when necessary, the proper processing of offers : spare parts, onsite interventions and repairs.
• Coordinate onsite interventions actions and ensure an ongoing communication to the customer.
• Provide technical assistance to the Repairs Department and Field Service Technicians + Business Centers ;
• Occasionally promote to customers, technical training sessions and sales of spare parts and repairs ;
• Initiate, together with the appropriate stakeholders, the implementation of corrective actions that arose from customer complaints/claims.
• Be the technical interface within the departments, such as Engineering, Purchasing, Sales, Production, Global Service and customers
• Identify potential sales opportunities and forward the information to the sales teams.
• Identify the spare parts needed for Sales team to quote to customer
• Recommend spare parts needed for regular maintenance/during troubleshooting
• Acts as last form of technical checks to make sure the spares quoted is according to customer’s requirement
• curb warranty costs.
• Be responsible for the collection of outstanding payments for the Customer Service department
• Maintain proper records of interaction with customers within the CRM tool
• Control offers and order confirmation as per applicable procedures

Requirements

• Have 3 to 5 years of experience in Mechanical Engineering. Marine engineering with mechanical knowledge will also be considered.
• Degree in Mechanical Engineering
• With hands on experience on compressors, turbines and pumps mechanically
• Be willing to travel if needed.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Position Overview:

• The Mechanical Engineer will be responsible for designing, developing, and overseeing the implementation of mechanical systems, including HVAC, plumbing, and fire protection, for new-build residential and commercial building projects. The ideal candidate will have a minimum of 5 years of relevant experience and a strong background in mechanical design.

Key Responsibilities:

• Design and develop mechanical systems for greenfield residential and commercial projects, including HVAC, plumbing, and fire protection systems.
• Prepare detailed design drawings, calculations, and specifications in compliance with project requirements and local regulations.
• Collaborate with architects, structural engineers, and other stakeholders to ensure seamless integration of mechanical systems.
• Conduct site inspections to monitor installation and ensure adherence to design specifications and quality standards.
• Manage project timelines, deliverables, and budgets related to mechanical engineering work.
• Stay up to date with advancements in sustainable and energy-efficient mechanical design practices.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or related field.
• Minimum 5 years of experience in mechanical engineering, particularly in greenfield residential and commercial building projects.
• Strong proficiency in mechanical design software (e.g., AutoCAD, Revit).
• Knowledge of building codes, sustainability practices, and energy-efficient designs.
• Excellent communication and coordination skills.
• Ability to manage multiple projects and meet deadlines.

To Apply, kindly click on the "APPLY NOW" button and job details. We regret that only shortlisted candidates will be notified.

Daniel Lim | Registration Number: R24124455 | AlwaysHired Pte Ltd

EA Licence No: 24C2293

Job Description:

Skilled and experienced VMware Workspace ONE engineer & Horizon will join our dynamic team. As a VMware Workspace ONE engineer, you will design, implement, and support VMware Workspace ONE solutions for our clients. You will collaborate closely with clients, project managers, and other technical teams to deliver high-quality solutions that meet business needs.

Responsibilities:

• Design, deploy, and maintain VMware Workspace ONE solutions based on client requirements.
• Configure and integrate VMware Workspace ONE components, including VMware Identity Manager, VMware AirWatch, and VMware Horizon.
• Provide technical expertise and guidance to clients on VMware Workspace ONE architecture and best practices.
• Troubleshoot and resolve issues related to VMware Workspace ONE solutions.
• Collaborate with cross-functional teams to ensure successful implementation and integration of VMware Workspace ONE solutions.
• Stay current with industry trends and advancements in VMware technologies.
• Design, deploy, and maintain VMware Horizon solutions based on client requirements.
• Configure and integrate VMware Horizon components, including VMware Horizon View, VMware Unified Access Gateway (UAG), and VMware App Volumes.
• Provide technical expertise and guidance to clients on VMware Horizon architecture and best practices.
• Troubleshoot and resolve issues related to VMware Horizon solutions.