Total 7,617 Engineering job vacancies in Jurong East, North East

Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsiblities :

1) To manage and coordinate site steel structural Work.

2) Oversee operation on a day to day basis.

3) Ensure the works are done in safety, on time and within budget.

4) Mediate on site conflicts.

5) willingness to work a flexible schedules.

Qualifications :

1) Degree in Structural Engineering.

2) 3-5 years experience in a construction environment.

3) Budget Management experience require.

4) Valid class 3 Singapore driving licence.

- Electronics & Electrical Engineering background

- Strong analytical skills, including the ability to find creative solutions and can work independently

- Experience with developing prototypes and conducting tests to validate designs

- Knowledgeable in IoT Systems, including embedded systems such as microcontrollers, graphical user interface(UI), sensors etc

- Proficient in programming languages such as Embedded C, C++, Python, Arduino, Xilinx and Vivado etc. or equivalent

- Knowledgeable in Circuit Design and PCB Design software such as Altium, Easy EDA, etc. or equivalent

• Review and interpret construction drawings, method statements, and risk assessment forms for job and tender submissions.
• Serve as the main liaison between the site office and headquarters to facilitate the integration of e-invoicing systems.
• Coordinate with various departments to ensure seamless communication and workflow.
• Assist in promotional and marketing initiatives to revamp the company's corporate website.
• Ensure compliance with all relevant regulations and industry standards.
• Maintain accurate records and documentation of all site activities and communications.
• Strong understanding of construction drawings, method statements, and risk assessments.
• Experience with integrating e-invoicing systems is preferred.
• Background in promotional or marketing activities.
• Excellent communication and interpersonal skills.
• Proficient in Microsoft Office Suite and relevant industry software eg. Asurix.
• Ability to work independently and collaboratively within a team.
• Strong organizational skills and attention to detail.

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

Job Summary:

We are seeking a skilled and highly motivated System Engineer who has strong Windows Server Management experience to help manage the installation, configuration, testing and support in IT system implementation projects.

Mandatory Skill-set:

• Diploma or Degree in Computer Science, Information Technology, or Engineering;
• At least 2 years of experience as a System Engineer or similar role, with a focus Windows 10 and 11 operating system;
• Strong knowledge of desktop hardware components, peripherals, and their configuration;
• Experience as a System administrator, provide support, troubleshoot and maintain computer servers and networks;
• Good technical skill in LAN/WAN, configuration and troubleshooting server, storage and tape library hardware knowledge;
• Proficiency in diagnosing and resolving technical issues related to window server computing;
• Familiarity with software deployment tools and methodologies;
• Experience with Active Directory, Group Policy, and system security configurations;
• Excellent communication and interpersonal skills, with the ability to explain technical concepts to non-technical users;
• Possesses strong problem-solving and analytical skills with ability to work independently and collaboratively in a team environment;
• Able to work within tight timelines with good prioritization skills.

Desired Skill-set:

• Knowledge in networking technologies encompassing Fortinet, Sophos and Cisco switch, router, and firewalls.

Responsibilities:

• Install, configure, and maintain Windows 10 and 11 operating systems in the IT system implementation projects;
• Manage IT operations including managing servers, active directory, backups, virtualization, storage and other infrastructure related tools;
• Diagnose, troubleshoot, and resolve hardware and software issues related to servers;
• Collaborate with cross-functional teams to deploy software applications, updates, and patches across the server environment;
• Implement and manage security measures, including antivirus software, firewalls, and encryption, to safeguard against potential threats and vulnerabilities;
• Monitor and optimize system performance, ensuring efficient utilization of the servers and responsiveness of user applications;
• Provide technical support and guidance to end users, addressing inquiries, resolving problems, and offering training as needed;
• Performing on-site for system troubleshooting to support users facing issues on both Windows and Linux systems;
• Create and maintain documentation related to system configurations, processes, and troubleshooting procedures;
• Understanding the customers system architecture and design to better support future enhancement in server system usage;
• Deploy endpoint protection and ensure firewalls are configured properly on both Windows and Linux systems;
• Manage and follow up with IT vendors on IT service level delivery and server issue;
• Collaborate with various IT vendors on project implementation.

Job Summary

A great opportunity as a Data Engineer to work in cloud based data engineering, analytics and data management team in a well established company.

Mandatory Skill-set

• Bachelor's Degree in Computer Science or equivalent;
• Minimum 5 years of experience in data engineering and data management;
• Hands on technical experience in Azure Data Factory, Databricks, Synapse, SQL Server Integration Services;
• Strong experience in Python / SAS / R along with Tableau / Power BI;
• Strong experience in gathering business requirements and translating into technical specification;
• Strong analytical skills with high curiosity to deep dive into root cause of problems and suggest solutions;
• Has good stakeholders management experience;
• Attention to technical details;
• Ability to deliver tasks on time with high quality outcome;
• Self motivated and ability to take ownership;
• Strong written and spoken communication skills.

Desired Skill-set

• Azure Data Engineer Certified;
• ITIL certified;
• Prior experience in Python, R or Machine Learning tools.

Responsibilities

• Design and develop data models, ETL pipelines, data integration process while ensuring data accuracy and quality;
• Perform data analysis of structured and unstructured data and perform business intelligence initiatives such as build user friendly reports using data visualization tools;
• Analyze ETL requirements from users and provide solutions accordingly;
• Responsible for planning and executing data profiling and data quality analysis;
• Monitor data pipelines, databases and analytical processes to ensure smooth operations;
• Identify and resolve data-related issues, performance bottleneck and data quality problems;
• Design and document data catalogs and data architectures;
• Perform regular data cleansing exercise to ensure that data is of high quality and relevant to the business needs;
• Execute data transformation, correction and aggregations to ensure compliance with business / regulatory requests;
• Build and maintain reports and dashboards using suitable data visualization tools;
• Conduct analysis on the reports and translate the findings into valuable insights to business users;
• Prepare data for prescriptive and predictive modelling;
• Perform database monitoring and performance tuning.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

DUTIES/RESPONSIBILITIES:

Production Planning & Scheduling:

• To manage the day-to-day operations of the warehouse, including production processes, and logistics operations, ensuring efficiency, quality, and timely delivery of products.
• To schedule the maintenance of tools and equipment to support production plans
• To ensure proper functioning of production machine and identify the repair needs and routine maintenance of production equipment
• To organized & upkeep all production & administration documents for traceability & record.

Staff Management:

• To communicate regulary with upper management regarding problems or issues impacting production
• To lead and motivate the production/warehouse team, providing guidance, coaching, and support to ensure high performance and morale.

Quality Control:

• To ensure all production processes meet quality standards, implementing control measures to maintain consistency.

Process Improvement:

• To identify and implement efficiency-boosting improvements, tracking key performance indicators (KPIs) to enhance productivity.

Safety & Compliance:

• To oversee day-to-day activities on the production floor
• To ensure compliance with safety regulations and standards, implement safety protocols and procedures, and promote a culture of safety within the production workplace.

The successful candidate will be a demonstrated self-starter with a proactive, hands-on approach, possessing excellent interpersonal, decision making, team work & communication skills.

REQUIRED SKILLS/ABILITIES:

Possess a Nitec/Diploma/Degree in a relevant discipline

Good to have relevant working experiences in production/manufacturing field

Industry/ Organization Type: Workshop & Manufacturing

Strong knowledge of production processes, quality control, and safety regulations.

Proven leadership and team management skills.

Excellent problem-solving and communication abilities.

At least 3 years of experience is required for this role

Job Responsibilities:

• Lead and direct cross-functional team in program execution
• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit
• Track and monitor project progress to ensure project schedules and cost objectives are met
• Actively follow on sales leads and take lead in business development
• Serve as primary technical contact with customers on strategic or politically sensitive issues
• Provide support to BD manager in generating quotation for molding projects involving new toolings
• Provide customer support and perform in BD activities to direct customers; Serve as primary technical contact with customers on strategic or politically sensitive issues
• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)
• Identify and specify engineering requirements for new projects
• Initiate equipment procurement activities for new projects when needed (with Purchasing)
• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Job Requirements:

• Diploma/ Degree in Mechanical Engineering or related
• Minimum 3 years of working experience in project management & production process
• Plastic injection moulding and mould assembly background preferred

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Purpose:

Functions as a senior technical specialist or in a lead role in mechanical design. Works independently and applies advanced engineering techniques and analyses for problems and methods.

Responsibilities:

• Concept, Functional, Preliminary and detailed design of mechanical process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of various pumping systems for water, wastewater and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems
• Preparation of General Arrangement and equipment layout drawings
• Preparation of mechanical process equipment and pump specifications
• Mechanical equipment and pipe sizing and calculations
• Review and evaluation of vendor submissions
• Coordination with other disciplines e.g. civil, structural, electrical, building services, and instrumentation & control designers
• Lead meetings, discussions with clients, contractors and vendors
• Provide engineering support for bids & proposals
• Provide engineering support during construction
• Provide engineering support during testing and commissioning
• Provides project cost estimates to client
• Design management and project management of proposals and projects where the scope is primarily mechanical / process

Preferred Qualifications

• A Professional Engineer (PE) registered with Professional Engineers Board Singapore or Chartered Engineer
• Possess a university engineering degree (mechanical)
• Candidate shall have minimum of 10-15 years’ experience in the mechanical design of wastewater treatment (municipal and industrial)
• Able to work independently in producing the project deliverables to meet project timeline
• Leads and guide a team of engineers and carries out QA/QC work on their designs
• Proficient in written and oral communication with good interpersonal skills

This position will entail travelling within the region and assignments on marine construction barges offshore during installation works.

RESPONSIBILITIES

• Directly responsible on all engineering, planning, loadout, materials and all other technical services essential to support the construction and installation activities at the offshore worksite
• Make sure that all project preparation is in order and that construction personnel fully comprehend and properly apply the installation procedures' details.
• Co-ordinate and request from the Offshore Construction Manager or barge Foreman any resources required by his subordinates
• Review project planning with a view to improving on the completion date, if possible during implementation
• He shall at all times know the current progress of the project with respect to planning and should be able to give details of why project is ahead/behind schedule at all times

REQUIREMENTS

• Technical / Professional: Bachelor Degree / Diploma in Civil Engineering is preferred
• Possess a dynamic and outgoing character that can communicate with all working levels
• Willing to travel overseas and work on site

APPLICATION ENGINEER

We preferred direct hiring, not through agent. Do not call for agency

Highlights

• Monday to Friday, 5 days work week – 9am to 6pm
• Multinational Organisation (MNC)
• Within walking distance from Joo Koon MRT station
• Positive and friendly environment
• AWS and Variable bonus
• Group healthcare and personal accident insurance
• Annual salary increment

Responsibilities

1. Provide technical, tender pre-qualification & commercial supports to sales team.
2. Provides technical and commercial supports to customers and insures maximum service is provided in all customers' contacts and communications.
3. Coordinates with company's business units on technical and commercial issues, work closely on quotation strategy.
4. Technical order administration.
5. Utilises all the communication devices to provide engineering information, in support of WEG product quotation, to existing and potential customers.
6. Coordinates with WEG Authorised Service Centers in providing technical support to Distributors and Customers.
7. Attend to all Distributors', OEM's and Customers' technical inquiries on all WEG products.
8. Liaises with WEG Authorised Service Centers on all aspects of motor repairs including warranties and service reports in the territories.
9. Perform other administration / assignments which management may assign from time to time.

Requirements & Preference

• Proficient in both English and Mandarin at a business level is essential for liaising with ASEAN customers
• Basic computer skills in Microsoft Word and Excel
• Basic Knowledge of Electric Motors is an advantage.

Please submit your application indicating the below information:-

• Current and expected salary
• Notice period/ availability date to start work
• Reason for leaving (last job)

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

You will be responsible for the set-up, operations, maintenance and inspection of CNC machines, tools, materials and products, including the following job responsibilities:

-Operate CNC machines to perform tasks such as drilling, grinding, milling, etc.

-Perform routine maintenance of all precision computer equipment by running tests, replacing worn or broken parts and keeping inventory of CNC machines parts and supplies.

-Verify CNC machine settings by measuring positions, first-run part, and sample workpieces to ensure adherence to quality standards.

-Modify CNC machine speed, tooling and cutting style to ensure precision and accuracy of manufactured metal parts.

-Set up components such as tool registers, offsets, compensation, and conditional switches, etc.

-Program CNC machines by entering instructions, including zero and reference points.

-Maintain safe operations by adhering to safety procedures and regulations.

-Perform inspections of equipment, structures, materials and products.

-Document actions by completing production and quality logs.

-Any other ad hoc duties assigned by supervisor or Management.

Requirements:

-Minimum 2 years of proven work experience in operating CNC machines.

-Knowledge of CNC machine operations, tooling and using precision measurement tools.

-Computer savvy with familiarity in programming and interpreting CNC software.

-Ability to read and interpret mechanical documents and engineering drawings.

-Possess strong analytical skills and an eye for detail.

-Hands-on experience as a CNC Machinist.

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Overall Job Objectives

Assists the Manger to handle all architectural works as instructed by Managers

Core Responsibilities

1. Architectural drafting, liasing with consultants, subcontractor and document control such as monitoring of sample submission, approval status of drawings
2. Attend meetings with consultant & subcontractor regularly
3. Provide technical advise to the architectural designers with regard to building regulations
4. Responsible for work in all phases of the architectural process

Job Specifications

1. Min Degree and above.
2. Good communication, interpersonal and collaboration skills
3. Minimum 3 years of relevant experience.

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with the Contractors of the IWMF and also TWRP.

• With a focus on inter-disciplinary construction management, assist the CRE to coordinate the existing team of discipline Lead Resident Engineers as required, including liaison with our in-house Engineering Design Manager (EDM) on any outstanding design issues that may affect immediate construction activities.

• Lead and coordinate the construction work interface between IWMF contractors and TWRP contractors works and tie-ins etc and in particular with counterpart Interface Manager from TWRP.

• Lead and set up interface meetings between the various Contractors to drive the Contractors to resolve their coordination and tie-in point issues.

• Coordinate with BIM Manager and set up interface BIM walk through sessions as required with the Contractors.

• Project delivery planning updates for the interfacing/tie-in points from the IWMF/TWRP Contractors with a specific focus on MEICA issues given the stage of the project.

• Coordinate and expedite internally on urgent RFA/RFI submissions with regards to interfacing matters, in particular between EPC1 and EPC2 but also with IWMF and TWRP.

• Attend other site meetings as required by CRE and coordinate internally to resolve technical issues with the Contractors with regards to interfacing matters with a specific focus on MEICA issues given the stage of the project.

• Attend and follow-up on interface/coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, interface meetings with TWRP, etc and as required for the coordinated completion of the Works under each contract as they lead into the Testing and Commissioning phase of the project.

Requirements:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

Roles and Responsibilities

1. Handle daily procurement operation tasks.

2. Manage and track Purchase Requisition and/or Purchase Order to make sure the procurement for projects is delivered on time.

3. Maintain and update list of approved suppliers and their qualifications, delivery times, and potential future development.

4. Work closely and keep relevant stakeholders informed on the latest progress/status of delivery within expected timelines.

5. Maintain accurate records of purchases and pricing.

6. Participate in implementation of cost efficient and effective purchasing strategies.

7. Ensure and promote compliance in accordance to company policies, processes and procedures.

8. Maintain good relationships with vendors and suppliers.

9. Any other ad-hoc duties as assigned by Procurement Manager.

Requirements

· 1 - 5 years of experience in purchasing role, preferably in M&E / Construction / Marine /Facilities Management Industry.

· Proficient in MS Office.

· Knowledge in ERP software is an added advantage.

· Possess good communication and interpersonal skills.

· Able to work independently and as a team player.

· Effective time and stress management under fast pace environment.