Total 7,974 Engineering job vacancies in woodlands tuas north west

Broad Function

The Engineering Assistant (Logistic & Automation) shall reports to the Engineer and assist in the execution and management of FM services, such as operation, maintenance, modification, replacement and activities under Logistic & Automation engineering systems and non-clinical equipment (such as Pneumatic Tube System (PTS), Automated Guided Vehicles (AGV), Pneumatic Waste & Linen Chute System (PWLCS), Food Waste Treatment and Vacuum System (FWTVS), Centralised Sterilised Supplies Department Equipment, Food Services Department Equipment and mobile equipment). In addition, the incumbent shall provide support to audit and monitor the prescribed KPIs of the maintenance services rendered by the specialist vendors and outsourced maintenance service provider. To support, implement and manage as necessary in cyclical and improvement projects by both the department and hospital

Key Responsibilities and Duties

Specific

1. To assist in overseeing preventive & corrective maintenance scheduling & coordination work. Manage Maintenance Agent day-to-day works for logistics and automated systems and equipment etc.
2. To assist to oversee the performance of outsourced maintenance service provider and specialist vendors to ensure good maintenance standards are maintained and planned PM schedules are met.
3. Ensure prompt service recovery for any breakdown of equipment and systems to minimize disruption to hospital service operations.
4. To assist to oversee and coordinate improvements projects to the hospital services and facilities as well as upgrading of systems and equipment components.
5. To provide advisory and support to the maintenance team in addressing and rectifying specialized system failures and troubleshooting. Recommend system condemnation and replacements as necessary.
6. To prepare technical specifications and drawings for system improvements and draft cost estimates and work schedule for project execution.

General

1. Oversee outsourced maintenance team safety practice and work conduct and ensure good maintenance standards are implemented.
2. Ensure prompt service recovery for any breakdown of equipment and systems to minimize disruption to hospital service operations.
3. Perform any other duties assigned by HOD.

Job Requirement

Education / Training / Experience

1. Diploma or Higher Nitec/Nitec in Electrical / Mechanical / Mechatronics / Automation Engineering.
2. At least 1-4 years of experience or ITE graduate with at least 5 years’ electrical / mechanical / mechatronics / automation systems experience for Engineering Assistant.
3. At least 5-6 years of experience or ITE graduate with at least 8 years’ electrical / mechanical / mechatronics / automation systems experience for Senior Engineering Assistant.
4. Have prior experience with design, installation, commissioning and maintenance of electrical / mechanical / mechatronics / automation systems & equipment will be an added advantage.
5. Prior experience in management of electrical / mechanical / mechatronics / automation systems and facilities operation as well as improvement projects will be an advantage.
6. Prior working experience in healthcare setting will be an advantage.
7. Conversant in reading and interpreting architectural and M&E schematic drawings.
8. Conversant in Microsoft Office and AutoCAD. Ability to use 3D perspective drawing software such as BIM will be an added advantage;

Attributes

1. Ability to organize, plan and manage facilities operation, analysis, project management works.
2. Excellent verbal and written communication skills and inter-personnel skills with the ability to communicate effectively across all levels and function well in a team.
3. Able to adapt and thrive in a dynamic working environment dealing with large work volume.
4. Creative, proactive and problem-solving attitude.
5. Possess strong interpersonal skills with the ability to influence and negotiate.
6. Communicate and engage stakeholders effectively

• Minimum three years of driving experience as a driver;
• Possess Class 3 or 4 Driving License with good driving records;
• Physically fit and healty;
• Willing to work overtime;
• Able to communicate with basic knowledge of English;
• Good communication and interpersonal skills;
• Good work attitude and courtesy is a must;

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

Roles & Responsibilities

• Perform installation/maintaining/Repair of machinery and equipment
• Carrying out routine inspection and servicing of machinery and equipment
• Assists in the company's maintenance schedule
• Update maintenance report & calibration report
• Maintain Spare parts and upkeep of Maintenance Room
• Participate in productivity project and work health safety
• Perform ad-hoc duties as assigned

Requirements

• Diploma in Mechatronics Electrical/Mechanical/Engineering / ITE Engineering
• Minimum 2 year of machine maintenance works
• Able to work independently with initiative
• Converse in both English and Chinese language
• Self motivate and able to involve in-coming event
• Willing to work in Tuas South area.

Benefits

• Company transport will be provided at mrt.
• Transport allowance will be given.
• Additional company holidays shutdown per year will be given.
• Other staff welfare benefits.

Candidates with experience in Manufacturing and mechanical area are encouraged to apply for this position.

- Prepare & submit FAI / Inspection report to customer.

- Maintain the documentation control for FAI / Inspection report / NCR and calibration system.

- Prepare inspection reports and analysis on Non-Conformance report.

- Support to provide 8D report for handling customer complaint.

- Assisting in failure analysis of internal and external defects.

- Provide support and training for the QC inspector.

- Assist in preparation of work instruction, procedure and inspection requirement.

- Support the supplier management by providing feedback on material quality to supplier.

- Prepare Certificate of Conformity, declaration of ROHs, REACH and other related report.

- Ensure the achievement of Quality Goal/objective in Key Performance Index Target.

- Perform dimensional inspection using CMM

- Conduct internal process audit

- Prepare & Conduct ISO 2001:2015 audit

- Maintain FA tools and working environment to meet the 5S and safety requirement.

- Able to plan and execute tasks within datelines and anticipate any problems before hand.

- Work well under pressure and able to finish by datelines.

- Motivated and can multitask.

- Able to work and interact with people from different backgrounds.

- Able to handle and work under stress conditions.

- Able to work independently with minimal supervision.

- Other ad-hoc activities assigned by the reporting manager

Prepare, plan and schedule of work sequences for construction operations as per construction drawings, specifications and contracts to understand project requirements.

Liaise with consultants, client and sub-contractors and coordinate for site activities arrangements.

Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing/final approved drawing from authorities. ·

Monitoring work progress and ensure that civil contracted works meet all practical, commercial, requirements of productivity, quality and contract target completion. ·

Ensure all structural work is carried out within established budgets and schedules. ·

Manage internal and external contractors well to ensure quality of work and scope of work is within specifications. ·

Responsible for all inspection activities being carried out. ·

Assist the project manager in the daily coordination, planning and execution of the project plan site.

Prepare daily/weekly/monthly site work progress ·

Adherence to safety practices in the workplace and ensure compliances to standard rules and regulations. ·

BBS production and delivery monitoring and prepare RTO allocation for inspection, concrete booking and materials requisition.

Review drawing and design drawing issue monitoring ·

Handling technical and engineering problems on site. ·

To facilitate project meetings and prepare minutes of meeting

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Salary: Up $4500

Industry: Engineering

Located at Woodlands

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• Able to write simple report

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Planning Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Optimizing inventory levels to reduce the impact of stock aging

· Analyzing historical data to identify abnormal forecast inputs and challenging internal product managers for forecast reviews

· Preparing and executing procurement proposals based on demand forecast input

· Cost/Budget Planning

· MPS,JDE, MRP, BOM experience is a must have

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

Responsibilities:

• Coordinate and work closely with Project Manager to oversee site matters and provide technical support such as interpret construction drawings
• Ensure all technical drawings conform to the latest BCA codes and regulations
• Supervise site progress and ensure timely delivery of contract works from subcontractors/suppliers
• Manage subcontractors/suppliers to perform their respective scope of works for smooth project execution
• Conduct regular site inspections and enforce in-house regulations
• Attend site meetings to assist the Project Manager with necessary preparatory works
• Liaise with relevant government agencies to obtain necessary site permits/clearances
• Any other ad-hoc duties as instructed by superiors

Job Qualifications / Requirements:

• Possess a recognised Degree or Diploma in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management and at least 8 years of relevant working experience of the building construction industry

or

• Degree in local universities in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

Responsibilities:

• Supervise and mentor a team of air conditioning installation technicians.
• Provide ongoing training and development opportunities for the team. Foster a positive and collaborative work environment.
• Develop and implement efficient installation schedules.
• Provide technical guidance and support to technicians in troubleshooting and resolving complex issues.
• Prioritize tasks and allocate resources effectively.
• Complete tasks on time and ensure all paperwork needed for each job is accurately filled out.
• Ensure prompt response to emergency installation requests.
• Ensure compliance with industry regulations, safety standards, and company policies.
• Implement and enforce safety protocols to ensure the well-being of employees and customers.
• Supervisor, train and ensure quality work delivery by the installers
• Perform any other duty that may be directed by management

Requirements:

• Possess a Singapore Class 3 license will be an added advantage.
• Minimum diploma in Electrical, Mechanical or Electronic field.
• At least 3 years of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.
• Positive attitude, good interpersonal & customer-centric skills.
• Experience in air-conditioning repair & maintenance.
• Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.
• Ability to work independently and collaboratively in a team.
• No experience is also welcome to join as apprentice.

Working Location:

Sungei Kadut

• · Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• · Only shortlisted candidates will be notified.

Broad Function

The Engineer reports to the Manager, FM and assist in the execution and management of FM services and activities in particularly those system under Mechanical Engineering services. In addition, the incumbent is responsible for ensuring audit and monitor the standards of maintenance services rendered by specialist vendors and outsourced maintenance service provider.

Key Responsibilities and Duties

1. Oversee preventive & corrective maintenance scheduling & coordination work. Manage Maintenance Agent day-to-day works for Plumbing and Sanitary Systems, Town Gas System, DC System, Roller Shutter, Auto door System, Etc.
2. Oversee the performance of outsourced maintenance Mechanical team and ensure good maintenance standards maintained and planned PM schedules are met.
3. Audit and monitor the performance standards of outsourced maintenance services by specialist vendors and service providers for mechanical systems critical to hospital operations.
4. Oversee and coordinate improvements projects to the hospital services and facilities as well as upgrading of systems and equipment components.
5. Project manager for improvement works to existing hospital facilities such as renovation and retrofitting, replacement of system infrastructure and improvement initiatives to existing specialized systems and hospital facilities
6. Assist to provide advisory and support to the maintenance team. This includes, system rectification and troubleshooting, system upgrade or expansion, condemnation or replacement.
7. Prepare technical specifications and drawings for system improvements and draft cost estimates and work schedule for project execution.

General

1. Oversee outsourced maintenance team safety practice and work conduct and ensure good maintenance standards are implemented.
2. Ensure prompt service recovery for any breakdown of equipment and systems to minimize disruption to hospital service operations.
3. Perform any other duties assigned by HOD.

Job Requirement

Education / Training / Experience

1. Degree holder in Mechanical Engineering or equivalent with 0-4 years of related working experience in similar portfolio for Engineer position.
2. Degree holder in Mechanical Engineering or equivalent with at least 5-6 years of related working experience or (Diploma with at least 10 years) in similar portfolio for Senior Engineer position.
3. Prior experience with design, installation, commissioning and maintenance of mechanical systems & equipment will be an advantage.
4. Prior experience in management of building services and facilities operation as well as improvement projects will be an advantage.
5. Prior working experience in healthcare setting will be an advantage.

Attributes

1. Ability to organize, plan and manage facilities operation, project management works.
2. Strong interpersonal skills with the ability to influence and negotiate.
3. Communicate and engage stakeholders effectively.
4. Good communication skills and team player
5. Creative, proactive and problem-solving attitude

Job Summary:

Salary: Up to $5000
Working Days: 3 rotating shifts (Morning, Afternoon and Night)

Roster: 3days Morning - 1 day off
4days Afternoon - 1 day off
3Nights - 1 day off

- Morning – 7am/7.30am to 4pm/4.30pm
- Afternoon – 2pm to 11pm
- Night – 10.30pm to 7.30am (shift allowance)

Location of work: CBD

Roles and Responsibilities:

• Support in the facilities management services, which include M&E support of the
  building
• Assist in the supervision of contractors in planning, coordination and execution of
  corrective, preventive maintenance, integrated system tests and annual building
  shutdown activities
• Assist in the preparation of regular reports for internal and external customers
• Assist in cost management and price negotiation with the vendors
• Support in other Ad-hoc project

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Site Supervisor Responsibilities:

• Inspecting construction sites regularly to identify and eliminate potential safety hazards.
• Supervising and instructing the construction team.
• Educating site workers on construction safety regulations and accident protocol.
• Enforcing site safety rules to minimize work-related accidents and injuries.
• Handling site accidents in accordance with established accident protocol.
• Maintaining an accurate record of construction employee attendance.
• Evaluating the performance of construction employees and instituting disciplinary measures as needed.
• Recommending changes to construction operations or procedures to increase efficiency.
• Attend the daily tool box meeting and convey clear instruction accordingly
• To work closely with other site operations staff to meet the project schedule
• Carry out day to day site operation and supervise of construction workers.
• Supervison work & safety of worker
• Able to travel from site to site
• Able to read autocad drawings
• Furnish site progress report and Hand on work
• Working in non aircon enviroment , construction site
• Attend site meeting when required

The DREX-CHEM GROUP is a successful leader in the distribution of specialty chemicals, process equipment, resins, pigments, etc in ASEAN and Hong Kong/China.

The Company views our human resources as the most vital key to our continuing growth and profitability.

To meet the challenges of our growth market, we have immediate vacancies for :

SALES ENGINEERS

Responsibilities :

· Sales, marketing, technical service and support.

· Product development, sales and supply.

· Responsible for processing orders and documentation.

· Identify and create new accounts to increase sales revenue.

· Execute a sales plan and report daily activities to the Manager

· Develop business relationship, visit and make presentation to potential customer.

· Collect and review customers’ enquiries and prepare quotations.

Requirements:

. Degree/Diploma/ITE in Sales & Marketing

· 2-3 years' experience in Sales & Marketing

· Valid Class 3 driving licence with own car is an added advantage

· Excellent communication skills.

· Good spoken and written English .

· Capable of developing new markets.

· Successful finishers with good track record have an advantage.

· Willing to learn and adapt.

· The necessary training will be provided.

· Able to travel overseas for training and business development.

· Ability to Work in Tuas of Singapore and ability to relocate to Singapore should only Apply.

Interested applicants are invited to write in (marked “Private & Confidential”) before 8 November 2024 with full resume, current and expected remuneration details to:

Drex-Chem Technologies Pte Ltd

1 Tuas, Avenue 16.

Singapore 638924.

Attn : HR Manager

Or email to: [email protected]

Job Description & Requirements

We are seeking a skilled and detail-oriented Engineer with at least 5 years of experience, proficient in AutoCAD and engineering material calculations. The ideal candidate will contribute to the design, planning, and analysis of engineering projects, ensuring accuracy and efficiency in every stage. Experience in the marine and offshore industry is highly desirable.

Key Responsibilities:

• Create and modify detailed technical drawings and plans using AutoCAD.

• Perform engineering material calculations and analyses to ensure compliance with industry standards.

• Collaborate with cross-functional teams to develop and optimize engineering designs.

• Review project specifications and technical drawings to ensure feasibility and accuracy.

• Provide engineering support to both office and production teams.

• Ensure all engineering projects comply with relevant safety and regulatory standards.

• Assist in the preparation of project reports and documentation.

Requirements:

• Diploma in Engineering or a related field (minimum requirement).

• At least 5 years of experience in an engineering role.

• Strong proficiency in AutoCAD and related design software.

• Proven experience with engineering material calculations.

• Knowledge and understanding of industry standards and safety regulations.

• Excellent problem-solving skills and attention to detail.

• Effective communication and teamwork skills.

• Experience in the marine and offshore industry is a strong advantage.

JOB DESCRIPTION

1. Project management experience (with or without PMP certification)
2. Automation background & experience in manufacturing industry
3. Possesses Operation and Process Improvement experience, with demonstrated visible results
4. Fluent in English and Mandarin, as we have vendors and projects in China

CANDIDATE REQUIREMENT

1. Possesses Engineering Diploma, Degree from established tertiary institutions
2. Minimum 3 yrs of experience in manufacturing industry
3. Singaporeans and SPRs are welcome

Candidates who are keen are invited to send their resumes to [email protected]

We regret that only shortlisted candidates will be notified.

Responsible for defining, optimizing, and documenting critical end-to-end processes across the value chain (Supply Chain Management) —such as order-to-cash, demand-to-supply, procure-to-pay, in-to-outbound, master data, and product lifecycle management. It focuses on the continuous enhancement of process quality through collaboration with process owners, experts, and relevant stakeholders. Additionally, this position oversees the effective and measurable execution and advancement of processes, monitoring the progress of initiatives against set objectives. Continual self-education in areas like digitalization systems and process/project management is essential, with the responsibility to disseminate this knowledge within the workplace as required.

JOB DESCRIPTION

1) Analyze current business processes to identify inefficiencies and areas for improvement. Map business processes to SAP modules (e.g., MM, SD, WM, QM, etc.). Propose process improvements and recommend SAP solutions.

2) Collaborate with stakeholders to gather, document, and validate business requirements. Translate business needs into functional specifications for SAP and MES systems. Conduct workshops and meetings with business users and technical teams.

3) Work with SAP functional consultants to configure SAP modules based on business requirements.

4) Develop the interface between SAP and MES with IT / OT Team. Help identify the need for custom developments, perform unit testing and support integration testing to ensure system functionality aligns with business needs.

5) Assist in project management and managing SAP / MES projects, from scope definition to delivery.

6) Develop and deliver training sessions to end users on how to use SAP applications effectively. Provide post-implementation support, troubleshooting issues, and ensuring the system meets ongoing business needs.

7) Create detailed documentation including process flows, use cases, and functional specifications. Maintain accurate records of system changes and ensure proper documentation is in place for future reference.

8) Improve the master data management under SAP. Create the dashboard for the business needs with Process Intelligence and Data Mining tools and Power BI (training will be provided)

CANDIDATE REQUIREMENT

1) Degree in Business Administration / Supply Chain Management/ Industrial Engineering or equivalent. Min 3 years’ experience, strong understanding of SAP modules and their business implications. Especially MM and SD.

2) Manufacturing background. Experience with Manufacturing Execution System.

3) Analytical and problem-solving skills.

4) Effective communication and interpersonal skills to interact with stakeholders.

5) Project management abilities.

6) Technical knowledge of SAP configuration, testing, and troubleshooting.

Candidates who are keen are invited to send their resumes to [email protected]

We regret that only shortlisted candidates will be notified.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$4000

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Logistics Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Support the routine receiving of goods by processing receiving documents and submitting them for Quality approval (if required), while updating the JDE system.

• Operate a forklift or reach truck to place goods in storage after clearance.
• Transfer materials within warehouses and deliver them to users.
• Assist with outgoing shipments (e.g., samples, BDS).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Supply Chain Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Manage product flow from import to patient, ensuring end-to-end visibility

· Oversee product lifecycle management

· Handle vendor management

· Plan financial budgets and costs

· JDE system management is a must have

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a QA Validation Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Contribute to the Quality Systems team by overseeing validation activities, particularly related to Data Integrity issues.

· Collaborate with the Subject Matter Expert to assist the validation team in conducting gap analyses and risk assessments before qualification activities, and suggest mitigation plans for identified gaps.

· Engage in investigations of validation discrepancies, help review and approve discrepancy reports, and support the closure of related CAPA actions.

· Review and approve validation documents, including protocols and reports.

· Provide assistance with any validation-related queries and issues.

· Review and approve standard operating procedures (SOPs), forms, and other relevant documents, including Manufacturing Batch Records.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Planning and deployment of resources such as manpower, machinery, equipment and material
• Preparation of progress report, Method Statements and technical submissions
• Ensure the project complies with regulations and clients’ specifications
• Adhere to safety and health regulations and ensure safety and housekeeping is maintain
• To perform Ad-Hoc duties as per assigned

Job Responsibilities

• Provide effective and timely services and support all existing scheduled projects
• Provide sales support on technical specification & information, data, drawings
• Project quotation specification confirmation and technical clarification
• Design accessories and create 3DCAD drawings for quotations and assemblies
• Provide consultation and offer workable solutions to help solve customers’ concerns
• Do on-site technical assessment and provide engineering solutions
• Presentation and training to internal and customers
• Ensures quality by completing all final inspections and repair reports

Requirements

• Degree/Diploma in Mechanical / Instrumentation / Mechatronics Engineering or equivalent
• Ability to operate 3DCAD (Solid Works)
• Good knowledge onl valves and instrumentation is preferred.
• Related experience in process & control or instrumentation service industry is preferred.
• Decisive, drive and ability to deliver effective, innovative solutions
• Good knowledge of Microsoft excel, word and powerpoint
• Be able to work long term with us
• English fluency (meeting and writing reports inside and outside the company)
• A person who has positive and can think and act for himself/herself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication and interpersonal skills at all levels.

Reporting Function

• Directly report to Engineering Manager/General Manager

Job Description:

Install, maintain, and repair electrical and mechanical systems, ensuring safety and efficiency.


Key Responsibilities:

1. Electrical installations, testing, and maintenance
2. Mechanical system installations, maintenance, and repairs (pumps, motors, HVAC)
3. Troubleshooting and repair of electrical and mechanical faults
4. Conduct safety inspections and risk assessments
5. Collaborate with engineers and technicians on projects
6. Develop and implement maintenance schedules


Requirements:

Essential:

1. Diploma/Certificate in Electrical/Mechanical Engineering or related field
2. 3+ years of experience in electrical mechanical technical works
3. Strong technical knowledge and problem-solving skills
4. Valid electrical/mechanical license/certification (if applicable)
5. Excellent communication and teamwork abilities


Desirable:

1. Experience with industrial control systems and automation
2. Knowledge of safety regulations and standards (e.g., OSHA)
3. Familiarity with building management systems (BMS)
4. Certification in electrical/mechanical trades (e.g., NETA, NICET)

Skills:

1. Electrical circuit analysis and troubleshooting
2. Mechanical system design and installation
3. Control panel wiring and programming
4. Safety procedures and protocols
5. Team collaboration and communication


Physical Demands:

1. Work at heights and in confined spaces
2. Lift/move heavy equipment (up to 50 lbs)
3. Frequent standing, walking, and manual dexterity


Working Conditions:

1. Indoor/outdoor work environment
2. Flexible schedule (overtime, on-call rotations)


What We Offer:

1. Competitive salary and benefits package
2. Opportunities for professional growth and development
3. Collaborative and dynamic work environment