Total 1,744 process engineer job vacancies in Manufacturing / Production category in Singapore

Job Description:

· Perform machine setup, calibration, testing and mechanical assembly of active devices to the interposer

· Test assembled devices and generated test report and summary

· Troubleshoot assembly issues and document findings for failures analysis

· Liaise with internal teams to manage incoming materials for assembly

· Perform analysis on packaging process specs performance, yield, manufacturing cost and cycle-time; and contribute to planning and execution of essential improvement program

• Able to manage Wafer Preparation including process characterization and improvement
• Hands on Disco Back Grinding and Stealth Dicer equipment with basic maintenance
• Perform die-assembly tool, flip chip bonder, wire bonder, solder ball jetting and CAD drawing
• Knowledge of Analytical Software such as JMP SAS. TIBCO
• Basic knowledge on Advance Package interconnection, Flip Chip, Wafer Bumping, Eutectic Bonding and Solder Ball jetting

Requirements;

· Hand-on experience with die-assembly tools, flip-chip bonder, wire bonder, and CAD drawing is strongly recommended.

· Understanding the packaging of semiconductor wafers is a plus.

· Good written and verbal communication skills

· Fresh graduates from Engineering faculty may be considered

Job Description

• Provide engineering support for wide range of products (RF/Mixed Signal / Digital) through all phases from development to production release
• Work closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement
• Close interaction with Product Test Engineering team and Communicate technical product status to management
• Establish with customers on product testing requirements and production release requirements
• Follow up with Foundries and test subcontractors/SAT houses to resolve all production issues.
• Provide detailed status reports at each phase, test limit (guard band) generation, correlation and yield summary reports
• Support Yield improvement, Test Time Reduction and retest rate improvement for production ramp

Job Requirements

• Degree/Diploma in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Product/Test Engineering with foundry process background preferred.
• Solid understanding of test concepts on digital , Mixed Signal and RF products
• Hands on experience using Advantest 93K ATE is added advantage.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/java/vba) and automation in reporting is a plus.

Our client is is the world's leading supplier of technology, integrated project management and information solutions to customers working in the oil and gas industry worldwide.

Position: Manufacturing Engineer/ Team Lead

Working Hours: Normal Shift Work

Working Place: West Singapore

Responsibilities:

• Ensure a production team safely use and maintain machine/assembly tools, equipment per procedure and work instruction (WI).
• Ensure safety guidelines and standard strictly implemented in shop operation.
• Provide guidance to technicians in various manufacturing functions and ensure a team to perform a good quality production.
• Manage day-to-day production to optimize resource and achieve on time delivery and best productivity.
• Ensure the smooth workflow of the shop by managing the manpower through responsibilities assignment and schedules preparation for the team
• Work to continuously improve in all areas to be in line with plant’s objectives and KPIs
• Implement and maintain shop production standard per CMS Elements: SFDM, 6S, TPM, A4 Problem Solving, ESP, RIE, SMED

Requirements:

• Degree/Diploma in Mechanical or equivalent preferred
• More than 5 years hands on experience in a manufacturing environment
• Experience in Welding and/or Machining
• System Knowledge: HR Navigate, SAP, MII
• Software Knowledge: Microsoft Excel and Words
• Background in lean manufacturing methodologies and operational excellence

Interested candidates, please send your resume to [email protected] with the subject of "Manufacturing Engineer". Thank you.

• Handle assigned Product from design to end of life and prepare the NPI schedules and ensure to meet the timeline.
• Monitor the progress of the product start from design to New Product Introduction (NPI) and site transfer until production ramp up.
• Liaise with respective functional department and teams to clear the roadblocks of any issue related to assign products.
• Develop continuous product improvement costing, process etc.

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent
• At least 3 years of product transfer experience in Electronics industry.
• Able to multitask and good computer knowledge.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

This role will support Cut Edge & Fit in ensuring our production schedules are fulfilled on a day-to-day basis, to ensure smooth operations. He/she must have a strong interest in Lens edging process; to ensure daily output meets quality, productivity, yield and delivery targets and he/she should be able to detect machine problems and inefficiencies; debugs and provides potential solutions and attempts to troubleshoot, using technical knowledge.
Ensures all Cut Edge & Fit machines/equipments are working exactly as intended and the finished products meets/exceeds customer expectations.

Responsibilities

• Support CEF team in performing work efficiently to meet production schedules
• Edger duties (Incoming/Final Quality check, Dotting of FSV lenses/Tracing/Blocking/Edging/Fitting)
• Operate machines and equipment supporting CEF production
• Production scheduling, prior to peak volume periods and periodically afterwards
• Inspection of machines, calibrations, adjustments, maintains production machines and equipment, ensures equipment and work floor are clean, safe, and well maintained
• Update process data into system for process monitoring
• Data updates on machine routine maintenance record, daily output log
• Predictive and Preventive Maintenance of MEI Machines
• Implement and execute the TPM (Total Productive Management) and PCP (Process Control Plan) processes to align with Global CEF Standards

Requirements

• Diploma in Engineering (Mechanical/Manufacturing) and/or Diploma in Optometry, Opticianry Certificate
• 3 years relevant work experience or edging experience
• Familiar with Production Scheduling and predictive/preventive maintenance
• Strong problem-solving skills
• Ability to work under time pressure
• Proactive mindset with the ability to tactfully handle stressful and difficult situations
• Attention to detail and a high level of accuracy
• Strong technical knowledge and passion for Edging
• Excellent communication and interpersonal skills
• Knowledge of Microsoft Office applications is a must

Job Responsibilities:

1. Assist Director in control production activities, material flow and inventory to achieve cost, quality and delivery targets.

2. Monitor and ensure timely delivery of project within scheduled time frame.

3. Resolve and keep track of project time schedule and process issues with relevant department.

4. Ensure manufacturing operation is running according to safety and quality system.

5. Manage use of equipment and maintenance of plant and machineries to ensure smooth operation and always keep track of quality issues to achieve zero defect.

6. Prompt reporting to management on production activities, periodical performance review on production output, quality and productivity.

7. Develop processes to measure and further workshop productivity (equipment performance, team efficiency etc.)

Job Requirements:

1. Minimum Qualification: Bachelor Degree in Engineering (Civil/ Production/ Mechanical).

2. Minimum Experience: 5 - 6 years’ experience in heavy engineering related to Steel industry.

3. Able to work independently

4. Good Knowledge of construction standard operating procedure

5. Knowledge in Civil & Structural design and analysis

Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous
• Entry level are welcomed to apply, training provided
• Singaporeans only

Job Description

• Provide engineering support for wide range of products (RF/Mixed Signal / Digital) through all phases from development to production release
• Work closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement
• Close interaction with Product Test Engineering team and Communicate technical product status to management
• Establish with customers on product testing requirements and production release requirements
• Follow up with Foundries and test subcontractors/SAT houses to resolve all production issues.
• Provide detailed status reports at each phase, test limit (guard band) generation, correlation and yield summary reports
• Support Yield improvement, Test Time Reduction and retest rate improvement for production ramp

Job Requirements

• Degree/Diploma in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Product/Test Engineering with foundry process background preferred.
• Solid understanding of test concepts on digital , Mixed Signal and RF products
• Hands on experience using Advantest 93K ATE is added advantage.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/java/vba) and automation in reporting is a plus.

Job Description

Your job duties include but are not limited to being responsible for the development and measurement of optical communication products in accordance with the mission and the goals of the company.

Specifically, this will include, but not be limited to the following:

● Design and Develop POET Optical Interposer products for yield and performance.

● Drive yield enhancement and defect elimination on a variety of optical engine designs based on POET’s Optical Interposer

● Perform data analysis, problem characterization, and fault isolation to determine the root cause of the problem

● Define problems by identifying failure modes, quantity of material affected, percent fallout, etc

● Responsible for monitoring, improving, recording, organizing, tracking and presenting the process yield data of POET’s fab partners

● Implement checklists, guidelines, "lesson learnt" and history documents to capture and record all yield-improvement activities

● Yield maintenance and yield improvement on multiple products

● Yield analysis to provide yield loss correlation to electrical, optical and physical (placement) parameters

● Analysis of related failure analysis methodologies, such as electrical failure analysis and physical analysis

Job requirements

● Minimum 5 years’ working experience with technical background in optoelectronics, optical components, and photonic device systems and sub-systems.

● Post-graduate degree (MSc/MPhil/PhD/EngD or equivalent) in Optoelectronics/Photonics/Electronics/Electrical Engineering/Physics or similar.

● Knowledge and Hands-on in semiconductor-based light-emitting optoelectronics is preferred.

● Possess strong data driven analytics and systematic problem-solving skills.

● Strong knowledge of failure analysis methodologies.

● Programming and scripting skills and computational literacy, e.g. C/C++, Python, MATLAB/Octave, etc.

● Proven working experience in the optoelectronics manufacturing industry.

● Proven organizational and multi-tasking skills.

Able to work in Changi (East)

Responsibilities:

• Assist the manufacturing supervisor in overseeing the daily operations of the production.
• Monitor and ensure compliance with quality and safety standards.
• Train and guide manufacturing operators on standard operating procedures and best practices.
• Coordinate with other departments to ensure smooth workflow and timely production.
• Assist in troubleshooting and resolving production issues in a timely manner.
• Conduct regular inspections and audits to identify areas for improvement.
• Prepare and maintain production reports and records.
• Assist in scheduling and planning production activities to meet customer requirements.
• Support continuous improvement initiatives to optimize productivity and efficiency.

Requirements:

• Min Diploma in Material Science / Chemical / Electrical/Mechanical Engineering or equivalent.
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis and DOE.
• Able to handle a team of a team of operators, technicians

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Lead and supervise a team of manufacturing operators to ensure smooth and efficient production operations.
• Monitor production schedules and targets, and take corrective actions as needed to meet customer requirements.
• Train new employees on safety procedures, equipment operation, and manufacturing processes.
• Develop and implement standard operating procedures (SOPs) to ensure consistent quality and productivity.
• Coordinate with other departments to ensure timely availability of materials and resources for production.
• Perform regular inspections to ensure adherence to quality standards and identify areas for improvement.
• Effectively communicate with team members, management, and cross-functional teams to address any issues and drive continuous improvement.
• Ensure compliancecompliance with company policies, safety regulations, and industry standards

Requirements:

•  Diploma or Degree in Engineering or related field.
•  With 2 years of experience in the wafer fab/ semiconductor industry.
•  Prior experience in a leadership or team lead role.
•  Ability to lead and motivate a team in a fast-paced environment.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

We are an Environmental Products & Services company, looking for a Product Engineer to join us.

Responsibilities

To provide technical assistance to the sales staff.

To look after all products’ technical issues and diagnose.

To oversee product supply, installation and commissioning

Provide advice to clients and business partners on technical issues.

Make product introduction/presentation to clients and business partners

Requirement

Diploma on any engineering discipline(mechanical, Electrical/ Electrical+Electronic)

Singaporean & PR only

Min 1 year of experience an advantage

Fresh graduate may apply as training will be provided.

Able to read technical drawings and use of drawing software.

Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous
• Entry level are welcomed to apply, training provided
• Singaporeans only

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Assist in the production and assembly of semiconductor devices.
• Perform equipment setup and calibration.
• Monitor and maintain production equipment.
• Conduct quality control inspections and testing.
• Assist in troubleshooting and resolving equipment and process issues.
• Follow standard operating procedures and maintain documentation.
• Ensure compliance with safety and quality regulations.
• Collaborate with cross-functional teams to ensure smooth production processes.

Requirements:

• Min Diploma in Engineering or related field.
• Prior experience in Wafer Fab/ Semiconductor Industry.
• Ability to work well in a team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Oversea Placement
• Permanent Job Opportunity in MNC
• Great Exposure

Job Description

• Module Process Development and Optimization:
• Engage in the refinement and enhancement of manufacturing processes specific to modules.
• Identify areas for efficiency enhancement and implement improvements to attain optimal outcomes.
• Consumable Material Evaluation and Testing:
• Assess consumable materials for compatibility with manufacturing processes.
• Conduct comprehensive testing to verify the reliability and performance of consumables in the production setting.

Data Analysis, FACA, and DOE Testing:

• Conduct thorough data analysis to detect patterns, anomalies, and opportunities for enhancement.
• Apply Failure Analysis and Corrective Action (FACA) methodologies and perform Design of Experiments (DOE) testing to bolster process robustness.

Definition and Documentation of Standard Specification Documents:

• Develop and document standardized specifications for processes and materials.
• Ensure documentation completeness to enable consistency and adherence to quality standards.

Resolution of Technology Issues to Enhance Process Yield:

• Investigate and resolve technology-related challenges affecting process yield.
• Collaborate with cross-functional teams to deploy solutions and continually enhance overall production efficiency

Job Requirements

• Min. Diploma in Engineering Science
• An opportunity to work as an expatriate with an 85% deployment in India locations.
• Proven experience in assembly, film lamination, glue binding, wet clean, or laser processes.
• Familiarity with quality control and process optimization techniques.
• Ability to troubleshoot and implement improvements in manufacturing processes.
• Good analytical and problem-solving skills.
• Effective communication and collaboration skills for cross-functional teamwork.
• Adherence to safety protocols and regulatory requirements.
• Continuous improvement mindset to enhance efficiency and product quality.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Pierre Chung Yih Shern
EA Personnel Reg No: R22111092

Info can be shared ATM: -

• Basic UP $3.5K + AWS + VB
• 5 Days (Office Hours)
• Loyang (Pasir Ris)

Your Responsibilities: -

• Ensure production processes according to work instructions
• Perform production support during new tooling and trials
• Provide recommendations, training and diagnose problems
• Maintain production machine and equipment maintenance procedures

You will need: -

• Min. 1 year of working experience in Plastic Injection Molding industry

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Core Skill Set:

Support Enterprise Correspondent Management System(ECMS)

Pitney Bowes products-Engage One,Designer,Vault,E-messaging,S agent

Service Delivery

Windows,IIS,SQLServer,WebLogic,JavaJ2EE,

Job Description:

Technical knowledge on Pitney Bowes products like EngageOne, Designer, Vault, E-messaging, Sagent

TechnicallycompetentinIIS,WebLogic,JavaJ2EE

Upto 7+ years of IT experience & 5+ years of application development/support

Last 3 years of relevant experience in banking/financial services industry

Demonstrable analytical skills with deep knowledge of Precisely (product/tool) in a Production Support Environment.

Strong SQL,IIS,Windows Java and Websphere

Incident,problem,and service Out age management experience is Plus.

Good Communication and Articulation Skills

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for reading, interpreting and drawing up technical drawing specifications
• Responsible in developing, coordinating, monitoring all aspects of the operational set up for projects assigned
• Responsible for working cross-functionally with different teams and organizations
• Responsible for applying Six Sigma/Lean Manufacturing methodologies for continuous process improvements and to improve operational efficiency

Requirements

• Min Nitec in Mechanical Engineering or relevant discipline
• Min 1 years of working experience in manufacturing industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Lead and supervise a team of manufacturing operators to ensure smooth and efficient production operations.
• Monitor production schedules and targets, and take corrective actions as needed to meet customer requirements.
• Train new employees on safety procedures, equipment operation, and manufacturing processes.
• Develop and implement standard operating procedures (SOPs) to ensure consistent quality and productivity.
• Coordinate with other departments to ensure timely availability of materials and resources for production.
• Perform regular inspections to ensure adherence to quality standards and identify areas for improvement.
• Effectively communicate with team members, management, and cross-functional teams to address any issues and drive continuous improvement.
• Ensure compliancecompliance with company policies, safety regulations, and industry standards

Requirements:

•  Diploma or Degree in Engineering or related field.
•  With 2 years of experience in the wafer fab/ semiconductor industry.
•  Prior experience in a leadership or team lead role.
•  Ability to lead and motivate a team in a fast-paced environment.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.