Total 1,532 Maintenance / Repair job vacancies in Raffles Place, Central Singapore

Primary Responsibilities:

• Operate semiconductor fabrication equipment

• Clean room environment

• Perform wet chemical processes

• Comply with quality systems procedures

• Read and follow written and verbal instructions

• Meet expectations for attendance and punctuality

• Work with solvents, basis, and acids

• Log process information into computers

• Performs other duties as may be assigned

• Training will be provided

Job Requirements:

• 'O' / 'N' / ITE qualifications

• Willing to learn and display a POSITIVE attitude

• Must be patient, observant and willing to listen to instructions being

assign to him/her

• Must be neat and tidy

Shift Pattern: Rotating Shift (optional)

Ability to communicate in Chinese is a plus

• In charge of repair, maintenance, and troubleshooting of machinery onboard.
• Execute lathe machining, basic gas welding, and cutting works to facilitate repair to machinery.

Requirements:

• Nitec in Mechanical engineering or equivalent
• At least 2 years of experience in mechanical fitment, basic gas and TIG welding, hydraulic and pneumatic system troubleshooting.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Under general supervision by Senior Technicians/Field Engineers and Discipline Lead Engineers to perform a variety of commissioning, troubleshooting and repair of various instrumentation including,but not limited to, calibration of input sensors such as temperature, flow, level and pressure transducers, analysers, fire & gas devices and other monitoring equipment.

To demonstrate a full understanding of all applicable policies and work methods associated with assigned duties to commission and maintain instrumentation equipment and to perform other duties as required.

Duties and Responsibilities

Included to but not limited to the following:

• Communicate clearly and precisely and follow oral and written instructions.
• Understand the need for and adherence to the Permit to Work and Lock-Out Tag-Out Procedure and follow safe working practices.
• Understand, interpret and work from various forms of project documentation such as the MC/PC
• Procedure, Tagging Procedure, Punchlist Procedure, As Built Procedure, Vendor Manuals etc.
• Install, inspect, calibrate, commission, maintain and troubleshoot Control Instrumentation, Fire &
• Gas and other monitoring equipment from the field to the end device.
• Pre-commission and commission Remote I/O panels, including input and output loops, device functionality, the control network between field and control room including HMI’s and C&E testing.
• Pre-commission and commission motor control signals between MCC’s and ICSS.
• Verification of data transfer through serial link interfaces between packaged equipment and ICSS.
• Understand, interpret and work from various forms of project drawings such as P&ID’s, BLD’s, Wiring Diagrams, IO Lists etc.
• Complete all relevant project documentation including knowledge of CMS, Mechanical
• Completion and Pre-Commissioning checksheets (ITR’s).
• Have a sound knowledge in the function and use of the various test equipment to perform the above tasks.
• Have a sound understanding of certified equipment and hazardous areas.
• Establish and maintain positive and effective working relationships with supervisors, fellow workers and vendors.
• Assist in providing training for less experienced personnel.
• Good timekeeping practices.

Knowledge Of

• Permit to Work / Lock Out/Tagout systems.
• HSE policies and completion management systems.
• Instrument theory, work methods, tools and testing equipment used in the commissioning of Oil & Gas Facilities.
• Fire & Gas equipment.
• Process control.
• ICSS (Integrated Control & Safety System).
• Addressable Fire Detection system.
• Preparation and submittal of MC and PC dossiers for handover to operations.
• As Building of documents and drawings.

Requirements

• Must have more than 5 years of working experience in the Oil and Gas industry.
• Has commissioning experience of more than 3 FPSO / FSO projects.
• Diploma or Degree in Instrumentation/Electronics Engineering or in any other relevant engineering qualification
• Must have strong commissioning experience in Instrumentation.
• Preference to have hands-on experience on the following:

1. Level Transmitters (Radar, Radiometric, Capacitance, tuning Fork, Diaphragm Seal, Displacer)
2. Flow Transmitters Equipment
3. Pressure and Temperature Transmitters.
4. Communication Systems - PROFIBUS, Optical Fiber, MODBUS, and Ethernet Systems.
5. PLC- PLC (Model: SIEMENS SIMATIC S7).
6. Commissioning and troubleshooting electrical feeders - ABB, VACON, Siemens and etc

Under general supervision by Senior Technicians/Field Engineers and Discipline Lead Engineers to perform a variety of commission, troubleshoot and repair of various electrical equipment including, but not limited to, MCC’s, VSD’s, distribution panels, motors, lighting and small power circuits.

To demonstrate a full understanding of all applicable policies and work methods associated with assigned duties to commission and maintain electrical equipment and to perform other duties as required.

Duties and Responsibilities

Included but not limited to the following;

• Communicate clearly and precisely and follow oral and written instructions.
• Understand the need for and adherence to the Permit to Work and Lock-Out Tag-Out Procedures and follow safe working practices.
• Understand, interpret and work from various forms of project documentation such as the MC/PC
• Procedure, Tagging Procedure, Punchlist Procedure, As Built Procedure, Vendor Manuals etc.
• Understand, interpret and work from various forms of project drawings such as SLD’s, Wiring Diagrams, schematics etc.
• Inspect, commission, troubleshoot, repair and maintain electrical, electronic and associated control systems and power circuits, power generating equipment and switchgear.
• Inspect, commission, troubleshoot, repair and maintain emergency electrical systems such as emergency power generators, emergency switchboards and lighting.
• Commission and maintain low and medium voltage switchgear, electric motors and various electrical systems such as lighting, small power, cathodic protection and associated equipment.
• Insulation integrity checks on cable installations.
• Insulation Resistance testing and Ductor testing on switchboards.
• Function Testing of Protection Relays and Circuit Breakers within switchboards and panels.
• Pre-commission and commission motor control starters (functionality testing).
• Injection testing of overload relays.
• Run Test on motors.
• Grounding checks.
• Battery bank preparation and discharge testing.
• Have a sound knowledge in the function and use of various test equipment to perform the above
• tasks.
• Have a sound understanding of certified equipment and hazardous areas.
• Establish and maintain positive and effective working relationships with supervisors, fellow workers and vendors.
• Assist in providing training for less experienced personnel.
• Good timekeeping practices.

Knowledge Of

• Permit to Work system.
• HSE policies and completion management systems.
• Electrical theory, work methods, tools and testing equipment used in the commissioning of Oil & Gas Facilities.
• Regulations pertaining to electrical and electronic installation.
• Principles of variable frequency drives, motors and control systems.
• Electrical schematic diagrams.

Requirements

• Must have more than 5 years of working experience in the Oil and Gas industry.
• Diploma or Degree in Electrical Engineering or in any other relevant engineering qualification
• Preference for CompEX certified with a valid CompEX Certification
• Must have strong experience in full FPSO commissioning project involvement, especially in Electrical commissioning activities.
• Conversant with the use of various test equipment including HV testing equipment, HV Phasing stick, secondary injection test kit.
• Good timekeeping practices.
• Have a sound knowledge in the function and use of various test equipment to perform the above tasks

The Facilities Technician is responsible for daily engineering sections to support the hotel operations

Primary Responsibilities

Daily Engineering Operations

• Operates the equipment to deliver a comfortable room temperature to hotel areas.
• Operates the equipment to deliver clean water to the respective services in the hotel.
• Operates the equipment to deliver hot water to the respective services in the hotel as required.
• Operates the equipment to deliver clear and sharp images from the television and satellites equipment to hotel guest suites as required.
• Operates the equipment to deliver audio visual support to the hotel event as required.
• Assists and supports the emergency operations team during an emergency and a crisis in a timely and efficient manner.

Shift Operations

• Rectifies equipment and facilities breakdown as required.
• Replaces faulty components / lighting bulbs as required.
• Responds to requests relating to technical issues from hotel patrons in a timely and efficient manner.
• Collects daily utilities meter readings and verify plant / equipment are in proper operations as required.
• Patrols hotel grounds to verify fire and safety risk as required.
• Patrols hotel grounds to verify all lightings on hotel grounds operate within the preset timings as required.

Plant and Facilities Services

• Operates plant facilities to support every aspect of hotel operations in a timely and efficient manner.
• Preventive maintenance.
• Rectifies / Repairs damaged furniture to the highest quality level and in a timely manner.
• Rectifies / Paints defective building surfaces to the highest quality level and in a timely manner.

Other Responsibilities

• Operates the hotel elevators and dumbwaiters as required.
• Operates the hotel swimming pool and water fountains as required.
• Operates the hotel fire protection services as required.
• Operates the hotel drainage and sanitary system as required.
• Operates the hotel television and satellites system as required.
• Operates the hotel public music system as required.
• Operates the hotel lightings and dimming system as required.

Involvement In Wider Job Function Actions/Relationships

• Upholds Accor Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect, in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes such as Planet 21 – Corporate Social Responsibility, Diversity and Inclusion.
• Performs any other duties and responsibilities that may be assigned.

About the job: We are currently seeking a skilled Service Manager to join our Singaporean team. As a Service Manager, you will assist the company with all after sales service matters including but not limited to telephone technical support, fault finding, machine repairs, warranty claims and spare parts processing.

Responsibilities:

1. Lead and manage product distribution and training throughout Pre delivery, Service, Parts, Warranty & aftermarket support.

2. Market analysis, Marketing strategies, Product development & pricing for the parts and service business.

3. Provide feedback and technical guidance to the Dingli Service Team on design and performance improvements that are required for the Singapore and Asia Pacific markets on a monthly basis. 

4. Provide details of the work carried out, parts used, time and mileage of van, with any comments appropriate to Dingli while repairing machines.

5. Build relationships with the key service personnel at each customer.

6. Develop and maintain product safety programs throughout the Asia Pacific region.

7. Drive projects for continuous improvement and streamline existing processes in the Asia Pacific region.

8. Develop budgets, manage P&L responsibilities, forecast revenue, COS and Expenses, monthly progress forecasting and planning.

9. Provide operational leadership for product sales and service team within the Asia Pacific region.

10. Human Resource Management including Goal alignment, workforce planning, performance management, retention strategies and conflict resolution.

11. Provide technical support, training and build a strong service team.

1. College degree in engineer or equivalent.

2. At least 3 years experience as a service manager or similar role in the mechanical or equivalent industry.

3. Knowledge of equipment rental companies in Singapore will be an advantage.

4. A valid driver's license and willingness to travel.

5. Knowledge of aerial work platforms or material handling equipment.

6. Ability to work under pressure and manage multiple priorities.

7. Strong problem-solving skills.

8. Fluent written and spoken English.

9. Current permanent work rights with no restriction in Singapore.

10. Strong leadership,excellent communication and management skills.

A yard technician will assist the Asst. Yard Manager with the day to day yard operations. He must

have the ability to operate a forklift and other heavy equipment and would require to complete

certifications on safety operation of these heavy equipment.

Job Description

• Work closely with the yard team in deliveries and shipment and safe keeping of all stock located within the warehouse.
• Do verification of incoming to and outgoing from of equipment / materials shipments from the warehouse.
• Compares deliveries with specifications indicated on purchase orders/contract document and prepares discrepancy reports for any item not in compliance.
• Using delivery documentation or delivery notes, prepares items for dispatch to clients.
• Inspects physical condition of the storage area, materials and equipment.
• In conjunction with the Financial Controller undertakes physical inventories if required.
• Performs other duties as assigned to support other department when required.
• Works within the company’s policies, objectives and quality management system.
• Assist the Asst.Yard manager on maintaining the warehouse clean and presentable.

• Candidate with no experience are welcome to apply.
• Ability/willing to learn and operate a forklift and other heavy equipment.

Kindly note that only shortlisted candidates will be notified.

Reg No. R23118389

Triton AI Pte Ltd

License no. 21C0661

• Permanent position
• AWS
• Overtime

(2 years contract, renewable or convert to perm anytime)

4 days, 8am-8pm/ 8pm-8am rotating shift

Address: Woodlands Checkpoint

Salary: Basic $2000 + $50 HP allowance + $220 Incentives + OT

Job scope:

• Identification, maintenance and replacement of electronic equipment and computers.
• Liaise with government agency on return and collection of faulty or repaired equipment.
• Tracking and recording the fault patterns and trends for monthly progress reporting to government agency.
• Provide guidance to general public on the use of on-site equipment such as Fee Collection Terminals.

Requirements:

• Possess certificate in NITEC/Electrical/Electronic or related discipline
• Able to work rotating shifts (4 days work week)

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Location: 39 Changi North Crescent Singapore 499642

Entity: Goodrich Aerospace Pte Ltd (MRO Site)

Specific Role Responsibilities:

• Perform work at cell level to meet the production schedule.
• Assemble, disassemble, perform minor cleaning, inspect, troubleshoot, and test in accordance with Component Maintenance Manual.
• Promptly resolve issue and ensure all repair cost estimates are updated accurately.
• Work in close cooperation with supervisor and other support personnel to resolve problems as when necessary.
• Adhere to Quality Management System (e.g. AS9110C / Airworthiness Part 145 requirement)
• Understand the use of common measuring equipment like torque wrench, calipers, micrometers, bore and depth gauges.
• Complies with all Environment, Health & Safety policies, and regulations
• Complies with all US and Singapore Export Control Regulations
• Actively participate in process improvement and environmental, health and safety activities.

Requirements

• NITEC/Higher NITEC/Diploma in Engineering (Mechanical / Mechatronics /Electronics/ other Aerospace related courses)
• Personnel with passed in Air legislation CAAS/ EASA papers L12/ L11/ M10, or other industry related qualifications would have added advantage.
• Preferably with degree or diploma in engineering.
• Ability to read, write and understand English.
• To read and work from technical and service manuals, technical orders, sales orders, specification, drawings, and other written instructions.
• Computer literacy (Knowledge in SAP will be preferred).
• Good communication skills needed, both oral and written.
• Candidates with no prior aviation experience are also welcomed to apply (Training will be provided)

Job Purpose:

This role will analyze, troubleshoot, repair, and resolve technical problems on equipment or components. Troubleshoots electronics devices at the component level and resolves integration and configuration problems involving circuit analysis, wave form calculations, fault isolation, prom programming, and signal flow tracing.

Responsibilities:

• Use knowledge of electronics and digital components (15%)

• Use knowledge and skills in electronic fundamentals and logic (10%)

• Read schematics and blueprints (10%)

• Use through hole and surface soldering skills (25%)

• Use multi meters, oscilloscopes, and signal generators-analyzers (15%)

• Troubleshoots electronics devices at board level (25%)

• Additional duties as assigned.

• Meets attendance and punctuality standards.

Knowledge, Skills and Experience:

• Technical with Electronics Field of Study preferred.

• High School Graduate with General  Studies field of study required.

• Other Education / Certifications: A+, IPC​

• Able to execute instructions and to request clarification when needed.

• Able to use a 10-key quickly and accurately.

• Possesses basic clerical and data entry skills.

• Possesses strong data entry skills.

• Able to perform basic mathematical calculations.

• Able to recognize and attend to important details with accuracy and efficiency.

• Able to communicate clearly and convey necessary information.

• Able to interact effectively with all levels of management.

• Possesses strong multi-cultural interpersonal skills.

• Possesses strong organizational and time management skills, driving tasks to completion.

• Able to constructively work under stress and pressure when faced with high workloads and deadlines.

• Able to maintain and promote social, ethical, and organizational standards in conducting internal and external business activities.

• Able to work independently with minimum supervision.

• Able to maintain confidentiality of sensitive information.

• Able to be immobile for long extended periods.

• Ability to transport 60 Lbs.

• Able to build solid, effective working relationships with others.

• Able to exhibit ability to be sensitive to the needs, concerns, and feelings of others.

• Able to quickly learn new systems and technology.

• Able to use relevant computer system applications at a basic level.

Working Conditions:

• Clean room environment requiring ESD protection.

• Occasional non-standard work hours or overtime as business requires.

What’s In It For You?

• Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.
• Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.
• Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.
• Diversity, Equity & Inclusion: It’s not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.
• Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.
• Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.

Don’t meet every single requirement? Apply anyway.

At Shyft Global Services, a TD SYNNEX Company, we’re proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you’re excited about working for our company and believe you’re a good fit for this role, we encourage you to apply. You may be exactly the person we’re looking for!

We are an equal opportunity employer and committed to building a team that represents and empowers a variety of backgrounds, perspectives, and skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity or expression, sexual orientation, protected veteran status, disability, genetics, age, or any other characteristic protected by law.

At Franklin Templeton, everything we do is focused on one thing – delivering better client outcomes. We do that by partnering closely with our clients, assessing their strategic needs, and identifying the solution or solutions that can meet the challenge. Over 9,500 employees working in 30 countries around the world are dedicated to servicing investment solutions for our clients in more than 155 countries. For more than 75 years our success has been a direct result of the talent, skills and persistence of our people, and we are looking for qualified candidates to join our team.

We are looking for a Facilities Executive – Technical (12 month contract) to join our Singapore office. This role will support regional facilities management and maintenance duties, who will report to Regional Facilities Manager (India) and closely work with CRE team.

What are the ongoing responsibilities of this position?

• Assist Regional Facilities Manager (India) in the daily operations of Singapore office spread across 4 floors.
• Dedicated resource on site working for FT CRE team.
• Manage the upkeep of equipment and supplies to meet health and safety standards.
• Inspect office structures to determine the need for repairs or renovations.
• Coordinate between vendors for facility issues and monitor PM activities over weekend as when required.
• Liaise with employees for facility issues and act for correction and feedback.
• Manage pantry supplies, electrical consumables, and furniture inventory.
• Manage the service vendor teams, sub-contractors, supervise & coordinate facility management activities and ensure all works adhere to legal regulations.
• Attend any cases raised including after hours by the Client which includes the tenants where applicable.
• Review utilities consumption and strive to minimize costs.
• Facility invoice review and submit for approval and processing.
• Preparation of monthly management report and incident reports pertaining to the site.
• Ensure smooth operations on site(s) by continuous monitoring.
• Manage ad-hoc project(s) in conjunction with regional CRE team.
• Facilitate incident investigation whenever necessary.
• To be rostered on 24-hr mobile standby team after office hour.
• Travel to Malaysia & Hong Kong’s office based on urgency.
• Urgency based travel to Malaysia & Hong Kong office.

What qualifications, skills and experience would help someone to be successful?

• Diploma in Mechanical/ Electrical Engineering, Building/ Facilities/ Real Estate Management or equivalent or a bachelor’s degree in project and Facilities Management can be an advantage.
• Minimum 5 years of relevant work experience.
• Good verbal and written communications skills.
• Sound computer knowledge, like Microsoft Office, AutoCAD and MS project.
• A certified Fire Safety Manager would be advantageous.

What makes Franklin Templeton Investments unique?

In addition to the dynamic and professional environment at Franklin Templeton, we strive to ensure that our employees have access to a competitive and valuable set of Total Rewards—the mix of both monetary and non-monetary rewards provided to you in recognition for your time, talents, efforts, and results.

We believe that being a good corporate citizen is good business. To us, corporate citizenship means being accountable, serving our clients, being an employer of choice, managing our environmental impact, and supporting our communities. An emphasis on corporate citizenship is embedded in our culture and values, and is an important element of how we achieve success.

We are also committed to your learning and development with resources focused around Experience, Exposure, and Education, to help you achieve your professional development goals.

Franklin Templeton values diversity in its workforce and welcomes employees from different backgrounds, generations, capabilities, cultural identification, sexual orientations, and gender expression, in addition to other attributes that contribute to a truly diverse and inclusive community.

Franklin Templeton is committed to fostering a diverse and inclusive environment. If you believe that you need a workplace arrangement to search for, or apply for, one of our positions please send an email to [email protected]. In your email, please include the arrangement you are requesting and the job title and job number you are applying for. We will review the request and make a best effort to enact the arrangement. It may take up to three business days to receive a response to your request. Please note that only requests for arrangements will receive a response.

We regret that only short-listed candidates will be notified.

Building and Facilities Maintenance Technician

• Working days: 5.25 days per week
• Working Hours:
  Mondays to Fridays : 0900hrs to 18000hrs
  Alternate Saturdays : 0900hrs to 1300hrs
• Working Locations: Ubi Road
• Salary Budget: $2,400 - $3,000

Job descriptions:

• Maintain the facilities with routine checks on electrical, air-conditioning systems, compressed air and chilled-water systems.
• Contact and work with contractors for routine servicing and emergency repair in order to keep the building in daily operational state.
• Supervise vendors during renovation in order to ensure a smooth transition to new areas.
• Maintain good housekeeping in AHU and switch room to maintain cleanliness of equipment and site.
• Work with contractors and vendors to carry out schedules and supervise work on premises to ensure quality cost effective repairs and renovation.
• Must be able to hands on to carry out repair for sanitary and plumbing works, electrical works and building works.
• Must be able to carry out simple fault finding for telephone lines.
• Any other duties that may be assigned from time to time.

Requirements:

• Minimum NTC education in Facilities / Electrical / Mechanical / Building Services with 2 years of experience in building maintenance and facilities support.
• Certificate in Building Maintenance/Building Inspection will be of an added advantage
• Must be willing to travel to other locations for repair work

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Responsibilities:

• Oversee and lead a team of assistant managers, engineers, technical officers, supervisors and technicians in facilities management for ministry building or hospital.
• Establish good working relationships with clients and develop trust and confidence.
• Establish and maintain quality service standards.
• Take charge of the overall Air Conditioning Maintenance Ventilation system.
• Manage the daily AC thermal comfort is within the acceptable limit
• Schedule maintenance activities for ACMV systems, tracking of maintenance works and follow up actions for systems such as chillers, AHU, FCU, fire protection, gas systems etc.
• Ensure regular meetings with client's and appointed sub providers
• Conduct daily audit inspections to ensure the outsource service providers are performing according to their contractual obligations and SLAs.
• Handle Tenant’s enquires.
• Conduct daily audit inspections to ensure the outsource service providers are performing according to their contractual obligations and SLAs.
• Manage and liaise with external agencies on new initiatives and major repairs and maintenance works.
• Prepare tender documents and specifications, plan, coordinate and execute rectification works.
• Responsible for project costing and control.
• Plan training requirement for staff needs for skills improvement
• Prepare and responsible for annual budget submission, audit report, assessment report for contractors' performance
• Prepare and certify contractors' payment

Requirement:

• Bachelor's degree in Mechanical Engineering or equivalent from a recognized university
• At least 8 years of related working experience
• Proven experience in facility management in a large facility, such as with , pharmaceutical, powerplant, semiconductor industry.
• Experience from healthcare facility such as hospital is preferable.
• Strong building and M&E knowledge with hands-on experiences
• Possess strong leadership, quality, good planning and organizing ability
• Has a good safety mindset and displays good WSH behaviors

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1549345

Triton AI Pte Ltd

License no. 21C0661

Responsibilities:

• Oversee and lead a team of assistant managers, engineers, technical officers, supervisors and technicians in facilities management for ministry building or hospital.
• Establish good working relationships with clients and develop trust and confidence.
• Establish and maintain quality service standards.
• Take charge of the overall Air Conditioning Maintenance Ventilation system.
• Manage the daily AC thermal comfort is within the acceptable limit
• Schedule maintenance activities for ACMV systems, tracking of maintenance works and follow up actions for systems such as chillers, AHU, FCU, fire protection, gas systems etc.
• Ensure regular meetings with client's and appointed sub providers
• Conduct daily audit inspections to ensure the outsource service providers are performing according to their contractual obligations and SLAs.
• Handle Tenant’s enquires.
• Conduct daily audit inspections to ensure the outsource service providers are performing according to their contractual obligations and SLAs.
• Manage and liaise with external agencies on new initiatives and major repairs and maintenance works.
• Prepare tender documents and specifications, plan, coordinate and execute rectification works.
• Responsible for project costing and control.
• Plan training requirement for staff needs for skills improvement
• Prepare and responsible for annual budget submission, audit report, assessment report for contractors' performance
• Prepare and certify contractors' payment

Requirement:

• Bachelor's degree in Mechanical Engineering or equivalent from a recognized university
• At least 8 years of related working experience
• Proven experience in facility management in a large facility, such as with , pharmaceutical, powerplant, semiconductor industry.
• Experience from healthcare facility such as hospital is preferable.
• Strong building and M&E knowledge with hands-on experiences
• Possess strong leadership, quality, good planning and organizing ability
• Has a good safety mindset and displays good WSH behaviors

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1549345

Triton AI Pte Ltd

License no. 21C0661

Job Description

• Maintenance and upgrades Windows Server, vSphere and third party software installation.
• Perform installation of hardware and software.
• Maintenance and setup of file systems.
• Resolve software problems with operating systems or third party products.
• Maintenance of Anti-Virus System, File System and Database Backups/restores.
• Setup guidelines, process to enhanced current work activity.
• Performance Monitoring.
• Maintain system security and compliance.
• Configuration management.

Job Requirements

• Degree in Computer Science or equivalent fields.
• Possess 2 years’ experience in Server Maintenance, VMware, implementation of various Windows Server OS is a MUST.
• Good understanding of: Intel x86 server hardware operation (HPE ProLiant, Dell PowerEdge),Large Data Center facilities operation is a plus.

Be part of something exceptional. Join the team in shaping the future of healthcare facilities management!

• Salary: Up to $8000 + Permanent Role with AWS and Variable Bonus
• Work Schedule: 5.5 Days Work Week
• Industry: Healthcare Industry

Responsibilities:

• Oversee a talented team of assistant managers, engineers, technical officers, supervisors, and technicians.
• Establishing strong client relationships and maintaining service standards
• Taking charge of the overall Air Conditioning Maintenance Ventilation system.
• Manage daily AC thermal comfort within acceptable limits
• Schedule and track maintenance activities for ACMV systems
• Conduct regular audit inspections to ensure service providers meet contractual obligations
• Handle tenant inquiries and liaise with external agencies for major repairs and maintenance works
• Prepare tender documents, coordinate and execute rectification works
• Plan training for staff development and ensure budget compliance
• Certify contractors' payments and ensure high standards of safety and integrity

• Bachelor's degree in Mechanical Engineering or equivalent
• Minimum 8 years of proven experience in facility management, ideally within healthcare, pharmaceutical, power plant, or semiconductor industries
• Strong leadership, communication, and interpersonal skills
• Proactive, independent, and able to perform under pressure
• Service-oriented mindset with a commitment to quality
• Hands-on experience with strong building and M&E knowledge
• High level of initiative and integrity, with a strong safety mindset

If you are a proactive, independent, and service-oriented individual with a passion for facility management, we want to hear from you! To apply or learn more, kindly forward your CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

Company: Chemicals Industry

Location: West (Tuas)

Position: Production Maintenance Technician (Job ID: 18802)

Job Description

• Performs the purification process of hydrogen peroxide and its related activities within stipulated targets and acceptable quality levels.
• Performs operations of the mixing of ammonium hydroxide and its related activities within stipulated targets and acceptable quality levels.
• Performs other operations such as but not limited to the following: Ultra-Pure Water System and its related activities, Waste-Water System and its related activities, Uilities Equipment Operations e.g., Chiller Unit, Drinking Water Tank, Compressors, Fire Fighting Water (FFW) etc.
• Troubleshoot process-related equipment and items.
• Conduct preventive maintenance on production related items.
• Performs calibration on production instruments and other related items.
• Perform process / operation line improvements.
• Prepare progress and statistical reports related to Production process equipment parameters, instrument using relevant Check Sheet and Data Sheet.
• Conducts inspection of the Production area and performs follow action as and when it is needed.

Job Requirement

• Preferably with 1 – 3 years of relevant experience
• Training is also provided for entry level candidates

Interested applicants please send your resume to [email protected] with email subject header "Job Application for [Production Maintenance Technician (Job ID: 18802)".

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Koh Siew Xing

EA Registration No: R22104418

Pasona Singapore Pte. Ltd.

1 FINLAYSON GREEN #09-02 SINGAPORE 049246

Email: [email protected]

URL: www.pasona.com.sg

EA License No:90C4069

Company: Chemicals Industry

Location: West (Tuas)

Position: Production Technician (Back End) (Job ID: 18805)

Job Description

• Reports directly to the Production Supervisor.
• Performs filling of hydrogen peroxide, ammonium hydroxide and mixing and filling of chemical polisher within stipulated targets and acceptable quality levels.
• Executes all production activities as instructed, such as but not limited to container preparations, inspections, washing, loading and palletizing to and from conveyor, strapping, packaging inspection, shrink wrapping, material receiving and handling, barcode generation and printing.
• Prescribe to adhere the procedure on QMS, EMS and OHS.
• Carry out necessary process parameters and record the data on check sheet and ensure that the readings are within prescribe operational range.
• Able to carry out and use hand held equipment necessary for operation activities.
• Able to carry out and use NAV operations.
• Able to carry out simple maintenance work.
• Able to carry out process and line improvement.
• Maintains the general upkeep and cleanliness of the production area.
• Strictly adhere to safety rules and donning of PPE when performing activities.
• Strictly adhere to standard operating procedure and observing line discipline.

Job Requirement

• Preferably with 1 – 3 years of relevant experience
• Training is also provided for entry level candidates
• Microsoft Office knowledge

Interested applicants please send your resume to [email protected] with email subject header "Job Application for [Production Technician (Back End) (Job ID: 18805))".

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Koh Siew Xing

EA Registration No: R22104418

Pasona Singapore Pte. Ltd.

1 FINLAYSON GREEN #09-02 SINGAPORE 049246

Email: [email protected]

URL: www.pasona.com.sg

EA License No:90C4069

Remuneration Package:

• Basic Salary uo to $8,000
• AWS 1 Month
• Variable Bonus

Responsibilities:

• Oversee and lead a team of assistant managers, engineers, technical officers, supervisors and technicians in facilities management for ministry building or hospital.
• Establish good working relationships with clients and develop trust and confidence.
• Establish and maintain quality service standards.
• Take charge of the overall Air Conditioning Maintenance Ventilation system.
• Manage the daily AC thermal comfort is within the acceptable limit
• Schedule maintenance activities for ACMV systems, tracking of maintenance works and follow up actions for systems such as chillers, AHU, FCU, fire protection, gas systems etc.
• Ensure regular meetings with client's and appointed sub providers
• Conduct daily audit inspections to ensure the outsource service providers are performing according to their contractual obligations and SLAs.
• Handle Tenant’s enquires.
• Conduct daily audit inspections to ensure the outsource service providers are performing according to their contractual obligations and SLAs.
• Manage and liaise with external agencies on new initiatives and major repairs and maintenance works.
• Prepare tender documents and specifications, plan, coordinate and execute rectification works.
• Responsible for project costing and control.
• Plan training requirement for staff needs for skills improvement
• Prepare and responsible for annual budget submission, audit report, assessment report for contractors' performance
• Prepare and certify contractors' payment

Requirement:

• Bachelor's degree in Mechanical Engineering or equivalent from a recognized university
• At least 8 years of related working experience
• Proven experience in facility management in a large facility, such as with , pharmaceutical, powerplant, semiconductor industry.
• Experience from healthcare facility such as hospital is preferable.
• Strong building and M&E knowledge with hands-on experiences
• Possess strong leadership, quality, good planning and organizing ability
• Has a good safety mindset and displays good WSH behaviors

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1549345

Triton AI Pte Ltd

License no. 21C0661

Julian Grey’s client is a Singapore based solution provider for high quality IT security products to value add to their MNC clients & channel partners and has been in the market for more than 2 decades.

Location: East

Benefits

• AWS and performance bonus
• Annual salary increment (subject to performance evaluation)
• Medical and Dental

Job Responsibilities

• Oversee building and data centre facilities components, including Building Management System, Fire Detection and Protection systems, Energy Management System, Chiller, Electrical
• Conduct troubleshooting and maintenance of facility equipment
• Manage contracts for facilities and equipment maintenance
• Prepare monthly SLA reports for equipment uptime, power usage & temperature readings
• Responds to emergency and be on 24x7 standby
• Oversee new data centre projects including renovation and maintenance
• Responsible for site inspections / audits by authorities
• Scheduling and tracking of servicing jobs and vendor management

The Ideal Candidate

• Educational qualification in Electrical / Mechanical Engineering or equivalent
• At least 1 – 2 years’ relevant experience in DC facility management and vendor management

Follow us for more updates, interview tips!

https://www.instagram.com/juliangreygroup/

https://www.linkedin.com/company/juliangreygroup/

https://www.facebook.com/juliangreygroup/

Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Adelphe Peok

Reg No. R1981957

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Purpose of the Position

· Support for the Operational readiness of the process plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)

· To manage operations to ensure it is maintained safe, reliable, and efficient.

· The operations are to achieve key performance indicators (KPI’s) and annual plan objectives.

Responsibilities

· Accountable for compliance with safety, health, environmental, quality and relevant industry standards.

· Accountable for safe, efficient, and reliable operation of assets

· Accountable for investigating and trouble shooting process issues and outages

· Support process improvement, productivity and reliability projects

· Accountable for the planning, supervision, and execution of operation activities

· Accountable for compliance to all Procedures, Routines, Logs and other Operational Processes

· Accountable for meeting contractual and supply commitments

· Accountable for planning and executing TAR operational activities

· Accountable for controllable site costs

· Accountable for timely and accurate data reporting

Requirements

· ITE in Chemical Process technology /Diploma in Chemical Engineering or related discipline

· 3-5 years Operational experience with demonstrable exposure to process plant operations and site-based activity or equivalent.

To apply, please visit to www.gmprecruit.com , job code: 23135.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

about the company

Our client is a global leader and distributor in the field of batteries and lighting products. They’re looking for an Equipment Engineer to join their dynamic team during an exciting time in their development.

What you will be here for

• Be responsible for ensuring manufacturing equipment/processes performance is meeting its targets through effective implementation of Preventive Maintenance and Improvement Initiatives.
• Resolve equipment/process issues timely and effectively within acceptable cost.
• Manage, implement, and support Projects (VS, CAR, Global) while meeting Time, Cost and Performance targets.
• Implement productivity improvement projects (CAPEX) and support Local/Global initiated projects.
• Manage Variable Expense while delivering the Safety, Quality & Productivity targets.
• Initiate & implement continuous improvement ideas to improve equipment performance.
• Develop team members through regular coaching and training.
• Ensure correct spare parts are always readily available.
• Prepare, monitor, and control budget and implement cost savings initiatives to meet cost targets
• Ensure Preventive maintenance execution is done as per established PM program. Make the PM program evergreen by updating and improving based on the equipment’s maintenance requirements.
• Collaborate and support cross-functional teams within and outside of his/her Value Stream.

What you will need

• Degree/diploma in Mechanical Engineering
• Hands on experience working with automated equipment from the food manufacturing/pharmaceutical environment
• Willing to work in the West area

If you are interested in the position, kindly apply directly or send your CVs to yiling.tan@randstad.com.sg.

We regret that only shortlisted candidates will be contacted.

EA: 94C3609 / Reg: R21103172

Company: Manufacturing Company
Location: West (Near MRT Station)
Position: QC Technician (18811)

Job Responsibilities

1. Reports directly to the section engineer and/or designate
2. Shall carry out all laboratory tests and measurements accurately in accordance to procedure and upkeep/maintain the instruments/facilities in good running conditions
3. Shall prepares standards and reagents for analysis in accordance to procedure and ensure that all related documentation is maintained
4. Shall perform basic maintenance and troubleshooting of instruments and write the maintenance report after troubleshooting/maintenance
5. Shall handle ISO Documentation/Raw Data for QA Department
6. Shall accurately update internal Statistical Process Control (SPC) charts and monitor the charts
7. Shall assist in training for staff for QC Section-related activities when required
8. Shall maintains and checks inventory of all storage samples and ensure all relevant records are maintained
9. Shall perform receiving of QA department purchase and ensure that received items and all related document are correct at the point of receipt
10. Shall assist in audit preparation
11. Shall support the QA Section in its activities as and when required
12. Shall be involved in near miss identification and provide work improvement (QEHS) suggestions
13. Shall maintains the general upkeep and cleanliness of the laboratory and related areas by performing housekeeping
14. Shall strictly adhere to all EHS/QMS procedures in all aspects of the activities and observe line discipline and 5S
15. Shall performs any other tasks as instructed by the supervisor, engineer, QC section manager and HOD

Job Requirement

1. Candidate with Diploma in Chemical or science discipline preferred (fresh graduates from local polytechnic)
2. Experience with analytical instruments like ICP-MS, AAS, etc.
3. Ability to communicate clearly in both writing and verbally and good interpersonal skills
4. Basic understanding of ISO9001, ISO14001 and OHSAS18001 standards will be an advantage
5. Proficient in Microsoft Office Tools
   We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Goh Sheng Ze Marcus
EA Registration No: R22108782
Pasona Singapore Pte. Ltd.
1 FINLAYSON GREEN #09-02 SINGAPORE 049246
EA License No:90C4069

Responsibilities:

• Attend to operation needs of customers or customer-appointed vendors
• Basic administration on the facility booking system
• Observe and execute the security duties
• Coordinate with Stakeholders whenever required
• Be familiar and follow the Policies and Procedures
• May be asked to switch to night duties on planned occasions
• Other duties as assigned by the Manager

Requirements:

• Minimum - ’O’/’A’ Levels
• Ability to work with minimal supervision.
• Willing to take up other duties during off peak hours

Technical:

• Adequate computer skills.
• Ability to use standard software applications such as Windows7 and MS Office for administrative tasks, reporting and documentation.
• Some appreciation of PC hardware and Printer troubleshooting is preferable.

Job Responsibilities:

• Plan, allocate and set up facilities spaces such as functions rooms and lounges according to requirements
• Set up and oversee audio-visual (AV) requirements for courses and events
• Prepare consolidated facilities booking schedule for relevant departments to have a common understanding and overview of ongoing and upcoming courses and events
• Coordinate and administer rental of function rooms to external stakeholders
• Assist with the day-to-day operations, renewal of licenses and permits, and maintenance of the building, electrical and mechanical facilities and all other matters related to the maintenance management of the building
• Assist the Head of the Department with management reporting, including consolidation and preparation of monthly rooms utilisation report for internal charging
• Process invoices for payment to vendors and contractors
• Ensure members’ feedback is communicated and acted upon internally
• Any other reasonable duties and responsibilities as assigned

Job Requirements:

• At least 2 years of relevant experience in facilities management, operations or a similar role
• Good working attitude and able to work under minimum supervision
• A team player with good interpersonal, problem-solving, and organisation skills
• Proactive, keen learner and customer-oriented
• Able to work under pressure and beyond regular hours when required
• Working knowledge of various audio-visual equipment and course delivery equipment, including lighting and fixtures, is a plus point