Total 1,156 Quality Assurance / Control job vacancies in 9 Tuas Loop, Singapore

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus:Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators Involve in Quality Walks during site quality surveillance when requiredAssist to manage the project lessons learned and initiate improvements and ensure experience transfer.
• Collaborative Coordination : Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements:

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role ,Min of 2 FPSO/FSO Projects Completion.
• Skills: Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicatorExcellent collaborator with cross-functional teamsIn-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Job Description

• Carry out pest inspections, pest management services and treatments at various locations and properties
• Submit service report promptly
• Other ad-hoc duties as assigned

Requirements:

• Candidate must possess Vector Control Technician Certificate by NEA
• No experience needed as training will be provided

Job Summary:

Salary: Up to $2600
Working Days: 5 day work week, 7.30am to 5.15pm
Location of work: King Albert Park - Transport Provided

Roles and Responsibilities:

• Able to interpret engineering drawings/ inspection plans
• Collecting of inspection samples, perform 1st Article Inspection, In-Process inspection, roaming inspection & final Inspection using measuring instrument such as Vernier Calliper, Micrometer & etc
• Support team on the inspection aspect during Process Qualification
• Assist team during customer acceptance
• Monitoring and housekeeping of Gauges and Measuring Instruments used for inspection
• Will require to move load around at times (with equipments)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

·Able to work on PH ,Night shif and Weekend

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators.
• Collaborative Coordination Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience: Min10 years of QAQC experience with at least 3 years in a leadership/supervisory.
• Skills: Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Job Responsibilities

. Provides administrative support to ensure efficient operation of office.

. Carries out administrative duties such as filing, typing, copying, binding, scanning etc.

. Exhibits polite and professional communication via phone, e-mail, and mail.

. Supports team by performing tasks related to organization and strong communications.

. Contributes to team effort by accomplishing related results as needed.

Requirements

. Able to speak and write in both Chinese and English.

. 1 years working experience as an admin.

. Able to work independently with minimum supervision.

. Responsible, mature and well-groomed.

. Good communication skills.

Working Hours

Monday to Friday : 8.30am - 5.30pm

Job Description & Requirements

Job Description & Responsibilities

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus:Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators;Involve in Quality Walks during site quality surveillance when requiredAssist to manage the project lessons learned and initiate improvements and ensure experience transfer.
• Collaborative Coordination: Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements:

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role.Min of 2 FPSO/FSO Projects Completion.
• Skills : Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicatorExcellent collaborator with cross-functional teamsIn-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Control and instrumentation (C&I) engineers are responsible for designing, developing, installing, managing and maintaining equipment which is used to monitor and control engineering systems, machinery and processes

Your job is to make sure that these systems and processes operate effectively, efficiently and safely.

You might work for companies who manufacture and supply the equipment or for the companies who use it, such as nuclear and renewable energy companies and environmental agencies.

You will need a thorough understanding of the operational processes of an organisation as your role is multidisciplinary, working closely with colleagues across several functions, including operations, purchasing and design.

Responsibilities

You'll need to develop skills in specific control disciplines, such as:

• advanced process control (APC)
• distributed control systems (DCS)
• programmable logic controllers (PLC)
• supervisory control and data acquisition (SCADA).

The use of these disciplines will depend on your job. In general however, tasks and responsibilities can include:

• designing and developing new control systems
• testing, maintaining and modifying existing systems
• analysing data and presenting findings in written reports
• managing operations
• working collaboratively with design engineers, operation engineers, purchasers and other internal staff
• project management within cost and time constrained environments
• providing advice and consultancy support
• purchasing equipment
• developing new business proposals.

• Support Project Management and Quality Assurance matters for EHS department
• Assist in daily operations of the Environmental Services.
• Follow up with laboratories to receive results on time
• Prepare draft report

Specific responsibilities:

• Support Project Management – Follow up with clients, reports etc
• Ensure that all operations are conducted within client and recognized industry health and safety requirements
• Lead Quality Assurance matters – Review reports
• Ensure that the Department Quality System is fully implemented
• Co-ordinate with Laboratory employees for quality testing and client’s requirement.
• Assist in the day-to-day operations of the Environmental Services.
• Perform any tasks as and when required by management.

Requirements:

• Graduate in Environmental Science/Engineering or equivalent
• Prior experience in field work for Environmental related services or testing is an advantage.
• Able to work independently and to coordinate several activities simultaneously
• Good communication, negotiation and interpersonal skills
• Able to maintain highest quality standard all the time
• Able to maintain good turnaround time (TAT) and on time delivery (OTD)
• Technical knowledge and experience in related field and in using quality management methods and tools
• Able to interact with all levels of management, suppliers and clients
• Works well under pressure, challenges status quo

Job Summary:

Salary: Up to $2600
Working Days: 5 day work week, 7.30am to 5.15pm
Location of work: Jalan Boon Lay

Roles and Responsibilities:

• Able to interpret engineering drawings/ inspection plans
• Collecting of inspection samples, perform 1st Article Inspection, In-Process inspection, roaming inspection & final Inspection using measuring instrument such as Vernier Calliper, Micrometer & etc
• Support team on the inspection aspect during Process Qualification
• Assist team during customer acceptance
• Monitoring and housekeeping of Gauges and Measuring Instruments used for inspection
• Will require to move load around at times (with equipments)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Roles & Responsibilities

Qualification

• Diploma or Degree in related Engineering studies
• Work Experience of 5years minimum in related field
• Work Experience of 12years minimum if degree is non related.

Job Description

• To liaise with customers on quality issues / requirements for new / existing parts.
• To specify, implement and review appropriate inspection method / equipment / tool to meet customers' quality requirements.
• To analyze and implement appropriate corrective actions to resolve quality issues.
• To evaluate and determine the appropriate acceptable quality limit and plan for inspections.
• To liase with customers
• To trial and improve inspection method or program for complex or complicated inspection.
• To evaluate new inspection equipment / tool / software.
• To specify and evaluate packaging method / materials for new / existing parts.
• To guide and provide training to Inspectors/Technicians in performing inspection as per inspection plan

• Drawings Review (P&ID & Isometric): Analyse piping schematics to verify that installation conforms to design standards, process flow, and piping isometrics for accurate fabrication. Cross-check that the system follows design specifications, noting discrepancies for correction.
• Material Inspection & Verification: Ensure all piping materials, fittings, and consumables meet ASME standards and project specifications through mill certificates and visual checks. Ensure material traceability by confirming that materials match project specifications and certifications (e.g., ASTM standards, material grades, heat numbers).
• WPS/PQR Compliance: Review and verify that Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) are qualified and comply with ASME Section IX, ensuring correct application on site. In PQR to ensure to verify for mechanical testing (Tensile, Impact, Bend, etc)
• Welding Process Monitoring: Oversee the welding process to ensure it complies with the qualified WPS, monitoring essential variables such as pre-heat, inter pass temperature, and welding technique.
• Check for any deviations from the approved welding procedures, ensuring proper filler materials, joint configurations, and weld sequences are used.
• Welder Qualification: Verify the qualification of welders by confirming that they meet the requirements outlined in ASME Section IX for the specific processes and materials they are working on. Witness welder qualification tests and maintain records of each welder's performance for the specific weld types and materials.
• Welding Joint Inspection: Inspect welded joints for conformity with welding symbols, dimensions, and tolerances as per engineering drawings and ASME Section IX requirements, ensuring correct joint preparation and quality.
• NDT Supervision: Supervise non-destructive testing (NDT) methods such as radiographic testing (RT), ultrasonic testing (UT), magnetic particle testing (MT), and dye penetrant testing (PT) to assess the integrity of welds according to ASME acceptance criteria table.
• Piping Fabrication & Installation Inspection: Inspect piping fabrication for correct fit-up, alignment, and installation as per project drawings and standards, checking pipe supports, alignment, and joint integrity.
• Pressure Testing: Witness and approve hydrostatic or pneumatic pressure tests on piping systems, ensuring that the pressure holds for the designated duration as per the ASME code and client requirements. (Hydrostatic Test, Pneumatic Test, etc). Review and sign off on pressure test reports, ensuring that all safety and procedural guidelines were followed during the testing.
• Documentation Control: Ensure proper documentation control, including test reports, inspection records, and welding logs, for creating and maintaining the piping test package, ensuring traceability and compliance.
• Communicate regularly and closely with clients or contractors to provide updates on quality control, inspections, and test results. Ensure all piping-related documentation, such as material certificates, welder qualifications, NDT reports, and test packages, are properly maintained and meet the required standards for final handover.

Hydroleap is a Singapore-based deep tech startup with a mission of disrupting the wastewater treatment industry. Our cutting-edge electrochemistry technology and innovative approaches to water and waste management have eliminated the need for manual interventions and toxic chemicals, making our solutions fully automated, cost-effective, and environmentally friendly helping industries to be more water and energy efficient.

With multiple successful deployments across the Asia Pacific region, including in the agri-food, oil & gas, data center, desalination, and construction sectors, Hydroleap is significantly impacting how water and wastewater are treated. As a company, we are proud to be backed by an impressive group of governmental and private venture capitalists, such as UntroD Capital, Mitsubishi Electric, Seeds Capital, State Government of Victoria, Wavemaker Partners,, 500, SGInnovate, Sparklabs, and Entrepreneur First.

Join our team and be a part of a mission-driven organization that is changing the world, one drop of water at a time.

What you will be doing:

● Develop system designs, including programming and selecting instrumentation and control equipment

● Prepare and review I&C specifications, requirements, and drawings, such as instrument lists, datasheets, ICA panels, control valves, process functional descriptions, and single line diagrams (SLD).

● Oversee control architecture, create single line drawings, and develop control schematic diagrams, with a focus on programming and necessary modifications for SCADA/HMI systems.

● Collaborate in the development of P&IDs, package specifications, logic diagrams, cause-and-effect diagrams, and control narratives.

● Prepare Request for Quotations (RFQs).

● Lead and liaise with suppliers regarding Instrumentation and Control Automation (ICA).

● Conduct installation inspections, loop checks, startup, testing, commissioning, and troubleshooting of plants.

Your Capabilities and Credentials

● Bachelor’s degree in Electrical & Electronics, Instrumentation, or Automation Engineering.

● Minimum of 3 years of relevant work experience, preferably in Instrumentation and Control.

● Strong knowledge of Instrumentation and Control systems.

● Familiarity with high-end fieldbus communication protocols (e.g., Profibus, Modbus).

● Ability to read and understand single line diagrams and generate Bills of Materials from them.

● Understanding of control schematics, motor controls, and materials take-off.

● Experience with Siemens or Mitsubishi PLC software is a plus.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Responsibilities:

1. Handle customer complaints and quality related queries
2. Implement customer requirements, carry out product quality plan for all projects and ensure PQP effectiveness
3. Implement quality tools in production to support corrective and preventive actions and continuous improvement
4. Part and line approval follow up (Qualification Package) throughout the project
5. Supplier Quality Management
6. Handle quality issues and liaise with cross-functional team towards improvement
7. Ensure related documents are updated accordingly for lesson learnt and continuous improvement

Job Requirements:

• College degree of Science/ Engineering
• Experience in quality control and customer/supplier quality management
• Experience in incoming, manufacturing and customer service area
• Familiar with quality tools and have basic knowledge of six sigma
• Familiar with the knowledge of IATF 16949 standard and 5 Tools (PPAP/APQP/SPC/MSA/FMEA)
• Good inter-personal and presentation skill
• Self-motivated and good team player

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

About Us

Love, Bonito is a digital-first company on a mission to empower the everyday Asian woman and inspire self-confidence. We are the leading direct-to-consumer womenswear brand, headquartered in Singapore, with an omni-channel presence across Indonesia and Malaysia, a retail franchise in Cambodia, and are fast expanding into international markets namely Japan, Hong Kong SAR China and United States of America.

Founded in 2010, we are proudly female-founded with more than 70% female representation across our organisation, leadership and STEM roles (#girlpower!). We raised a US$50M Series C round in 2021 and know that we’re on the cusp of something great, where we’re working towards becoming the most thoughtful brand globally, for the Asian female consumer, especially when it comes to our products, community and experiences.

There’s a lot more work to be done with all of our exciting plans. So we’re looking to team up with people who are wildly passionate about making an impact and be part of a dynamic team, in a workplace with no corporate BS (yes, you read that right!).

The Role

You will be responsible for ensuring that all products, processes meet the established quality standards. The role involves monitoring the quality standards of our vendors, conducting quality checks on samples, implementing continuous improvement measures.

You will work closely with cross functional teams to ensure compliance with industry regulations and customer requirements, enhancing product reliability and customer satisfaction.

You will need the ability to be both hands on and quick to think on your feet when dealing with our network of Suppliers. This is an exciting and pivotal role in the Sourcing, Production & Quality team that requires a go-getter with a positive mindset, have initiative, as well as enjoy working in a fast paced environment. 

You should have / be

• Bilingual in English and Chinese
• Self-motivated to deliver results, keeping a curious, proactive and innovative mindset
• A good sense of timeline coordination and scheduling
• Ownership of task with a mission-focused approach
• Strong attention to details
• High learning agility
• Comfortable working with data, reporting information tools and technologies to simplify production tracking processes
• Great at maintaining multitasking and execution abilities under tight deadlines
• To embrace change, manage change with a positive outlook and taking business needs as a priority
• Actively promoting effective communication to facilitate and drive resolution with internal and external stakeholders
• A passion for fashion is a must, interest in sustainability is a plus

Key Responsibilities

1. Quality Assurance and Control:

• Develop, implement, and maintain quality control standards across all assortments
• Work with 3rd Party QC inspections to conduct regular inspections and audits of production processes to ensure compliance with quality standards
• Prepare washcare labels on time upon order placement
• Review and approve materials and products before shipment
• Prepare required QC files ready for inspection
• Monitor and evaluate production processes to identify quality issues and recommend corrective actions

2. Process Improvement:

• Analyse quality data to identify trends and areas for improvement
• Collaborate with cross teams & tea leads to implement process improvements and corrective actions
• Lead initiatives to enhance product quality, reduce defects, and minimize waste
  

3. Compliance and Documentation:

• Ensure compliance with industry regulations, company policies, and customer requirements
• Maintain accurate and up-to-date documentation of quality control procedures, reports, and certifications
• Prepare and present quality reports to team leads
  

4. Supplier Relationship Management:

• Conduct monthly catch up with vendors to share back on their performance
• Understand vendor constraints and bridge internal stakeholders
• Collaborate with vendors to ensure the quality of raw materials and components
• Conduct supplier audits and assessments
  

5. Team Collaboration and Training:

• Work closely with sourcing, production, product development & commercial teams to ensure quality standards are met
• Work closely with the customer care team to address customer complaints and ensure timely resolution of quality issues
• Train and mentor staff on quality control procedures and best practices
• Promote a culture of quality awareness across the organisation

• Diploma/ Bachelor’s degree in Quality Management, Apparel Merchandising, Garment Product development
  2-3 years of experience in quality assurance/control, preferably in Apparel & Fashion
• Strong knowledge of quality management systems (QMS) and industry standards such as ISO 9001
• Experience with Lean methodologies is a plus
• Excellent problem-solving and analytical skills
• Strong communication and interpersonal skills

Key Competencies

• Attention to detail and a commitment to excellence
• Ability to work independently and as part of a team
• Strong organisational skills with the ability to manage multiple tasks
• Ability to handle pressure and meet deadlines

1. Flexible Work Arrangement

• Hybrid work and adjustable hours - as long as present during our core working hours

2. Staff Wellness

• Comprehensive corporate insurance (Fully covered visits at our panel clinics, Dental coverage, Maternity reimbursement)

3. Learning and Career Development

• Learning and development (i.e. subscription plans to best-in-class resources, personal development fund etc)
• Dedicated leadership training for those of managerial responsibilities
• Friday pm off for learning

4. #TeamLB perks

• Generous staff discount off LB products
• Corporate partnerships with a variety of companies
• Welcome to #TeamLB swag and store gift cards (get your LB work outfit on us!)
• Employee driven peer-to-peer recognition platform to honour and celebrate everyday achievements
• Internal Referral programme

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Posses at least Diploma in Civil Engineering or equivalent
• Knowledge and proficiency in Microsoft Office
• Exceptional attention to detail
• Good oral and written communication skills
• Great team player and able to work efficiently with minimal supervision
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Career Highlights:

• Good career advancement opportunity.
• Competitive compensation benefits.
• Company’s transport available.

Job Description:

• Perform Surveillance Inspection to ensure that the construction work is performed and duly meeting the project specific Quality Requirements.
• Verify in process inspection, final inspection and welding.
• Carry out Welding control and inspection.
• Prepare and maintain Welding Audit Report during construction.
• Record result of inspections and maintain records of specific items as per contract/specifications.
• Administer AFI request to Client and 3rd party and coordinate for inspection as identified in the respective discipline ITP.
• Raise Non-conformance reports as seen during inspection and follow-up on status of rework and close-out.
• Arrange for proper NDT requirements as per specifications.
• Interpret RT films pertaining to welding joints.
• Review all NDT reports and approval.
• Establish and maintain inspection and NDT progress status on weekly basis.
• Generate weekly weld rejection rate summary and weekly welder performance.
• Witness all testing activities as required by approved Inspection and Test plan.
• Monitor PWHT activities carried out as per approved procedure.
• Attend to all potential quality issue to prevent occurrence of defects.
• Prepare Test Packs for Piping Hydro static testing.
• Prepare/compile final punch list prior to delivery of the fabricated and assembled components.
• Follow-up other discipline HOD’s to get relevant documents as per MDR Index for compiling.
• Progressive compilation of records for MDR (Final Dossiers).
• Coordinate with client for review and approval of the MDR.
• Carryout surveillance activities during project execution.

Job Requirements

• Diploma/Degree in Mechanical Engineering
• Possess of valid Welding Inspectors certifications (AWS or CSWIP)
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.
• Experience in structural and piping materials.

Join Our Team as a QC Inspector – Ensure the Quality and Safety of ISO Tank Containers!

We are looking for a diligent and detail-oriented QC Inspector to join our team. This role is crucial in maintaining the highest quality standards for ISO tank containers by performing thorough inspections and collaborating with third-party surveyors. If you are dedicated to quality assurance and ready for a dynamic career, we want to hear from you!

Key Responsibilities:

• Conduct Comprehensive Inspections: Perform detailed internal and external inspections of ISO tank containers to identify any physical defects or damages, ensuring compliance with quality and safety standards.
• Accurate Reporting: Record inspection findings on data sheets or using a PDA, ensuring all documentation is accurate and completed on time.
• Coordinate with Surveyors: Work closely with third-party surveyors to facilitate inspections and certifications, ensuring all necessary regulatory requirements are met.
• Verify Documentation: Ensure all required documents, such as Equipment Interchange Receipts (EIR), inspection reports, and repair estimates, are prepared and submitted accurately.
• Inspect Labels and Manage Products: Check labels for accuracy before product release, and oversee labeling or re-labeling processes when necessary.
• Support Loading and Unloading Operations: Monitor loading and unloading activities to confirm that products are handled correctly.
• Safety and Quality Compliance: Maintain high standards of safety and quality across operations by conducting safety audits, reporting near misses, and participating in quality investigations.

Requirements:

1. Qualifications: 'N'/'O' Level or ITE certifications.
2. Language Proficiency: Fluent in English.
3. Physical Requirements: Must be comfortable working in confined spaces, at heights above 2 meters, or in environments requiring prolonged standing.
4. Work Conditions: Be prepared to work in warehouses or open spaces, which can be hot during certain weather conditions.
5. Experience: No prior work experience needed; on-the-job training will be provided.

Job Info:

• Salary: Basic up to $3500 + AWS + VB
• Working Hours: Monday - Friday (8:30am - 5:30pm)
• Location: Jurong East

Job Scope:

• To research and develop new products and services
• Research competitors' products and evaluate their detailed functions
• Conduct market research on security systems in the ASEAN region
• Collaborate with Japan HQ R&D and China R&D center for product development
• Survey existing and future infrastructure, including electrical power and telecom networks, to ensure product compatibility
• Provide field technical support by visiting clients to check and maintain CCTV surveillance systems
• Assist in obtaining technical certifications for new and existing products in various countries
• Design and develop test plans for security alarm systems, CCTV systems, and access control systems, adhering to industry standards
• Perform rigorous testing of system components such as control panels, sensors, cameras, access readers, and communication devices
• Simulate real-world security scenarios to identify and address potential vulnerabilities
• Maintain detailed test records and reports for future reference
• Analyze test results, troubleshoot system malfunctions, and document findings
• Collaborate with manufacturers or distributors to resolve issues and optimize system performance
• Provide technical support to internal teams across the ASEAN region
• Conduct in-depth research on emerging security technologies and their potential applications
• Analyze market trends and customer needs to identify opportunities for new product development
• Research standards like SS558, EN, and IEC for ASEAN countries
• Stay updated on the latest advancements in security technologies and testing methodologies

Requirements:

• Minimum qualification Diploma in Electronics
• Minimum of 2 years of experience in security system testing, preferably with exposure to alarm systems, CCTV systems, and access control systems
• Familiarity with testing methodologies and tools used in security system evaluation
• Strong understanding of electronic security principles and operation of various security system components
• Proficiency in basic IT knowledge is required
• Proficiency in technical documentation and reporting
• Ability to conduct presentation for internal customers and management
• Entry level with relevant internship experience is welcome

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.