Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Production Engineer

Salary Range: $4500 - $6000

Working Hours: Mon to Fri (8 am to 4.30pm)

Working Location: Jurong Island (Company transport provided near Jurong East MRT)

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Position: Production Test Manager

Salary Range: $10,000 – $12,000

Working Location: Tai Seng

Working Days: 5days (office hours)

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Location: Woodlands, Singapore

Shift Timings & Details:

• 1st Shift: Fri to Tue/ Mon to Fri, 7 am – 3 pm; Wed/ Sat, 7 am – 1 pm (5.5 days).
• 2nd Shift: Fri to Tue/ Mon to Fri, 3 pm – 11 pm; Wed/ Sat, 1 pm – 7 pm (5.5 days).
• 3rd Shift: Wed to Sun/ Mon to Fri, 11 pm – 7 am (5 days).

Job Highlights:

• Up to $12/hour + Attractive Overtime Rates (up to $24/hour).
• Cleanroom environment – work in a controlled and safe space.
• Immediate Start in a Fast-Paced Manufacturing Environment.
• Comprehensive Training Provided – No Experience Required!

Responsibilities:

• Execute production tasks to meet daily targets.
• Inspect products to ensure quality control standards are met.
• Report quality issues and rework products as instructed.
• Maintain cleanliness and follow Good Manufacturing Practices (GMP).
• Package and segregate products for delivery.

Requirements:

• Minimum Secondary Education.
• Good eyesight and attention to detail.
• Willingness to work overtime for additional income.
• Ability to understand simple English instructions.
• Cleanroom environment: Required to wear a smock, and mask as needed.

EA Personnel Name: Wong Choo Sian
EA Personnel No: R1762582
EA License No: 23C1703

Production Test Manager

Working Location: Tai Seng
Working Days:5days (office hours)
Salary Range:$10,000 – $12,000

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Position: Production Assistant
• Singapore's leading seafood processors, exporters and distributors
• Working hours: 5.5 days (Monday to Friday, 8am – 5.30pm; Saturday 8am – 12noon)
• Salary (commensurate with experience): Up to $1,800 basic salary + OT + Meal provided
• Working Location: Jurong
• Outpatient Medical & Dental Benefits Provided
• Duration: Permanent
• Industry: Processing and preserving of seafood

Main Responsibilities:

• Assist in the daily operations of the fish processing line, including cleaning, cutting, filleting, and packaging of seafood products.
• Ensure compliance with quality and food safety standards during all production activities.
• Operate and maintain machinery and equipment used in the production process.
• Follow hygiene and safety protocols, including the use of personal protective equipment (PPE).
• Adhere to HACCP and ISO food safety requirements, ensuring a safe work environment.
• Provide support during peak production times, including overtime if necessary.

Requirements:

• Experience in food production or manufacturing.
• Basic knowledge of food hygiene and safety practices (HACCP certification is an advantage).

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Overview

We are seeking an experienced Plant Engineer to join our central kitchen manufacturing plant. With a highly energetic technical team, the Plant Engineer is a pivotal role in the central kitchen who will be responsible for overseeing the highly automated packaging operations, serviceability of all production equipment and constantly improving the automation systems within the plant. The successful candidate will have a strong foundation in engineering and experience in managing and maintaining a high-volume food manufacturing plant.

Responsibilities

· Conceptualize systems and equipment to build capabilities for mass production of a wide range of ready meals.

· Constantly improve current automated production system through mechanical, electronic, automation, digital control enhancements and configuration.

· Daily setup and run the production system to meet with time-sensitive order demand

· Maintain highest level of hygiene standard in the plant

· Develop and implement preventative maintenance programs

· Ensure compliance with all safety regulations and policies

· Collaborate closely with other central kitchen teams to ensure smooth end-to-end operation

· Prepare documentation, conduct training and submit reports

Requirements:

· Diploma/degree in Automation, Mechatronics, Electrical or Industrial Engineering or related field

· Min 3 years of hands-on experience in large scale food production environment

· Extensive knowledge of food manufacturing processes and equipment

· Ability to lead a team and run a production process independently with a tight schedule

· Strong capabilities in design, implementation and troubleshooting of automation systems

· Has own transport

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Working days : Mon - Friday 8am to 5.45pm + 2hrs OT
• Salary : $1600+ Various Allowances + OT | Gross : Around $2300+
• Location : Woodlands Terrace
• Company transport provided at various area (Yishun, Admiralty, Woodlands, Marsiling, Lakeside)

Responsibilities:

• Handle & troubleshoot machines in production floor
• Operating of machines, conduct in-process inspection & handling according to procedures or Checking & Packing of plastic audio buttons & panels
• Do simple recording on relevant forms
• Housekeeping of workstations
• Standing Job

Requirement:

• Relevant experiences

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Production Engineer | HSE | Chemical Industry | Up to $5k | Jurong Island

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)

Responsibilities:

The Production Engineer (HSE) is responsible for Daily Operations and Projects Safety, the Lead to reviewed, improvement and compliance to all Safety regulations and requirement. Manage the Operations Risk Assessment and ensure occupational Safety

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site.
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities.
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation.
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed.
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline.
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner.
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date.
• Lead and enhance any other HSE related improvement projects/activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry
• Diploma / Degree in Engineering, health, safety, or environmental field of study

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Work Location: Jurong Island (Company transport provided near Jurong East MRT)

Work hours: Mon to Fri, 8 am to 4.30 pm

Salary range: Basic $4000 - $5000 + $200 (site allowance)

To coordinate Maintenance Activities between Production and Technical department. Support GCM/SDM MA & MO activities. Support work permit and authorization activities.

Responsibilities:

• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan.
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed.
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well.
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage.
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up.
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production.
• Support work permitting and work authorization activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Related working experience in the chemical industry.
• Diploma/Degree in relevant field.
• Minimum 2-3 years of experience in maintenance planning and coordination.

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

Summary:

• Event Operation / Production Manager
• Premium lifestyle events and exhibitions
• Basic up to $6000
• Guaranteed yearly AWS
• Project incentives + profit sharing
• Location: Henderson Rd
• 5 days work week @ 10.00 - 6.30pm

Key Responsibilities:

• Oversee event and exhibition production timelines, ensuring quality deliverables
• Manage logistics, negotiate costs, and ensure high-quality output from external vendors
• Handle pre-event planning, onsite execution, and post-event processes
• Work closely with the design and project teams to ensure smooth internal communication
• Oversee fabrication, setup, and dismantling phases of events and exhibitions
• Proactively troubleshoot and resolve issues during setup and event days
• Coordinate risk assessments, safety regulations, and documentation
• Other relevant duties

Key Responsibilities:

• Min 3 year of experience in production and operations management for big scales events
• Possess construction, electrical and other technical knowledge
• Proficient in AutoCAD and technical production plans

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description

• Position: Production Planner
• Well Established Singapore Based Manufacturing MNC
• Working hours: Monday – Friday (8:30am – 6:00pm)
• Salary (commensurate with experience): Up to $4,200
• Working Location: Ang Mo Kio
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Manufacturing

Main Responsibilities:

• Plan materials requirement according to production schedule and to ensure optimal inventory levels.
• Monitor production schedule to meet delivery requirements.
• Work closely with Testing team and arrange production staff to work according to schedule.

Requirements:

• Minimum Diploma in Manufacturing or Electronics Engineering.
• At least 2 years of relevant work experience in electronics manufacturing industry.
• Able to communicate and work closely with internal customers, purchasing team and sub-contractors.
• Experience with ERP system.
• Team player with supervisory, interpersonal and communication skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Machine Operator (Maintenance & Production)
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8 AM – 5 PM, Sat: 8 AM - 12 PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• On-Job training provided

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67062 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Scope:

a. Perform soldering of PCBA with microscope;

b. Assist in SMT basic setup (OJT to be provided) e.g., Kitting Process, Tape and Reel Feeder loading, In-Process Checks; and

c. Cleanroom working environment, with donning of ESD apparels such as smock, shoes, hairnet, mask.

Requirements:

a. Basic manual soldering experience, with understanding of electronic and PCB Board, soldering processes;

b. Education level N level and above; and

c. Able to converse and understand assembly instructions written in English.

Training:

a. Training will be provided for successful candidates to perform his/her job scope.

* Soldering of through-hole and surface mount soldering

* Rework method

* SMT preparation

The working hours are as follows:

Mondays to Thursdays: 8.30am to 6.00pm

Fridays: 8.30am to 5.30pm

Meal Breaks: 1 hour

The basic monthly salary will commensurate with the shortlisted candidate’s work experience, negotiable.

An entry-level position with basic knowledge in TV or film.

To support the operational aspects of production by performing administrative tasks and logistical management, ensuring everything, from welfare to transport, is organised.

Good command of English (other languages are a plus) and willing to be groomed towards becoming an Assistant Director / Production Coordinator / Assistant Production Manager.

Production Assistants will also be trained in all aspects of production (no production experience required as training will be provided to successful candidates) and additional production workflow training and up-skilling will be provided to successful candidates after the probation period.

We are seeking resilient individuals who can be:

• Team players

• Multitaskers

• Problem solvers

• Productive

• Resourceful

• Meticulous

• Morale boosters

• Excellent communicators

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Job Description:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer.
• To successfully complete New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects.
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality.
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ).
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes.
• To update the status of on-going programs to the management.
• To consistently pursue for new customers.
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline.

Requirements:

• Degree or diploma in mechanical engineering/precision engineering.
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed.
• Proficient in Microsoft Office suite of programs.
• Good verbal and written communication and presentation skills.
• Strong leadership to lead, guide and inspire the project team to produce quality work and stay committed to all deliverables.
• Business oriented, meticulous, and cost sensitive.
• Ability to analyse, solve problems and decision making.
• Strong organisational skills with a can-do attitude to always improve and initiate new ways of working to achieve results.

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

• Experience in application support role for min 5 years for support and good knowledge of Java, Unix/Linux, SQL
• Recent experience in working with Java J2EE applications
• Experience in Unix commands , SQL queries
• Experience in programming languages such as JAVA/J2EE.
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills & ability to meet SLAs

To support, maintain and execute studio / production office services and operational procedures, as well as to be groomed to handle all aspects of production.

Good command of English (other languages are a plus) and willing to be groomed towards being an on-ground Production Manager or Business Manager (assisting in production, only as and when required – some production experience will be a plus, and training will be provided to successful candidates). Career path with the company - Series Producer.

Production Manager will also be trained in all aspects of production and post-production (no post-production experience required as training will be provided to successful candidates) and additional production workflow training and up-skilling will be provided to successful candidates after the probation period.

We are seeking individuals with good organisational and computing skills (proficiency in Microsoft Word, Excel and PowerPoint/Keynote, G-suite and/or OneDrive is a plus) who can be:

• Leaders

• Team players

• Negotiators

• Multitaskers

• Diplomatic

• Problem solvers

• Productive

• Resourceful

• Firm yet fair

• Positive mentors/supervisors

• Strategic thinkers

• Meticulous administrators

• Stress managers

• Morale boosters

• Excellent communicators