Total 8,253 structural engineer job vacancies in Singapore

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Animal Science Care Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Senior IT Support Executive

• Working hours: 8.30am to 6.00pm (Mon – Fri)
• Office location: Pandan Road [Company transport is provided from Clementi MRT (one way) ]
• Salary: $3500 – 4200

Responsibilities:

• Administer and configure infrastructure systems and applications (e.g. Active Directory Services, Data Centre, video conferencing, audio system, telephony, server storage, backup, etc.), network devices (Firewall, routers, VPN, internet proxy, wireless, etc.), desktop, mobile devices and other remote devices.
• Ensure systems are backed up automatically, recovery plans and disaster recovery plans and patches are carried out successfully and monitor the systems’ resources usage closely.
• Liaise with external vendors to ensure Service Level Agreements (SLA) are met.
• Draft and update technical documentation such as administration & user guides.
• Provide technical support to both Local and Overseas branches’ users over the LAN and WAN without compromising security.
• Source for products/solutions and vendors/suppliers for required projects.
• Provide L1/L2 support and participate as a team lead or member in projects.

Requirements:

• Diploma or Degree in Computer Science, Information Technology, OR/AND Certification in CCNA
• Minimum of one year of relevant experience
• Proficient in enterprise networking, including WAN, LAN, and VPN optimization implementation and support
• Skilled in administering Microsoft Server 2012 and later, Microsoft 365, and Google Suite products/services
• Familiar with internet architecture designs such as TCP/IP, DNS, DHCP, Proxy and Firewall
• Familiar with devices like Alcatel PABX, FortiGate Devices, Cisco and Unifi Wireless AP Controller
• Strong knowledge of CyberRisk and CyberSecurity; familiarity with PDPA is highly preferred
• Experience with Veeam, VMware, and UNIX/Linux is an added advantage
• Experience in API/Web Programming and Database Administration is an added advantage

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis to support our client's ongoing project.

*Duration: 1 year (renewable)

*Work Location: Tuas (company transport is provided)

*Working days: 5.5 days

About the role:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with contractors on site.
• Focus on inter-disciplinary construction management by assisting the CRE in coordinating the existing team of discipline Lead Resident Engineers, including liaising with the in-house Engineering Design Manager (EDM) on any outstanding design issues affecting immediate construction activities.
• Lead and coordinate construction work interfaces between contractors, including managing tie-ins and collaborating closely with the counterpart Interface Manager.
• Organize interface meetings between various contractors to facilitate resolution of coordination and tie-in point issues.
• Work with the BIM Manager to set up interface BIM walkthrough sessions as needed with the contractors.
• Provide project delivery planning updates on interfacing and tie-in points, specifically addressing MEICA issues given the project's current stage.
• Coordinate and expedite urgent RFA/RFI submissions regarding interfacing matters, particularly between EPC1 and EPC2.
• Attend site meetings as required by the CRE and work internally to resolve technical issues with contractors concerning interfacing matters, with a specific emphasis on MEICA issues.
• Participate in and follow up on interface and coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, and other relevant sessions, ensuring coordinated completion of the works leading into the Testing and Commissioning phase of the project.

About you:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for manual lathe machines and CNC machines
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Responsibilities:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements for FEOL area

- Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap

- Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements

- Work with equipment suppliers to develop new capability

- Engage in active participation in Package Development Engineering activities

- Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need

- Create decision matrix for equipment and material selection

Installation and qualification of new equipment platform and handover to production group (pilot line setup)

- Plan/submit capital request to acquire new Equipment

- Create purchasing specification (Doc2) document

- Establish the new equipment qualification criteria and activities roadmap with respective functional - team

- Establish project handover requirements and procedures upon machine qualification

- Prepare documentation for handing over with respective site owner

- Conduct data gathering for low volume production

- Conduct training for Site representatives

- Feedback loop for Continuous Improvement after mass volume production

Maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

- Maintain and regularly update the TOR, with inputs from local or other assembly site

- Maintain general knowledge of process and material characteristics and translate to equipment design requirement

- Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

- Maintain knowledge of design constraints and weakness of existing platform

- Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:
- PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
- Minimum 2 years’ experience in related semiconductor industry
- Experience with technical knowledge on assembly and/or wafer bumping packaging technology
- Advantage packaging technology and Front end of line background will be preferable and plus point
- Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
- Fast learner, with initiative and independence (min supervision)
- Good teammate, ability to integrate and cooperate with cross function teams and external vendors
- Strong communication and presentation skills
- Understanding of business needs and customers’ requirement
- Strong project management skills to ensure execution to timelines

• Perform system performance test and evaluation and customer qualification focusing on vision inspection system.
• Evaluating and establishing vision system performance specifications.

Requirements:

• Diploma in engineering discipline
• At least 1 year of field servicing experience in semiconductor industry
• PC hardware, OS and networking knowledge

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a global leader in semiconductor inspection solutions.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

5days, permanent, CBD

Our Client

MNC facility management /M&E engineering company in building and industrial market

Service offer to client

Build, manage, maintain

Job Scope:

• Report to the Project Manager for ACMV project planning, execution, and completion.
• Coordinate with internal team members and external subcontractors on-site to ensure quality and compliance with health and safety standards.
• Oversee site testing and track project costs.
• Support the accounts department with progressive payment claims.

Requirements:

• Minimum of 3 years of experience in ACMV/HVAC project management.
• Diploma in Mechanical Engineering or a related field.
• Proficiency in ACMV technical calculations (e.g., heat load, airflow rate, chiller capacity).

Work location :CBD

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

For better response, pls apply via job page

https://recruitmentalliance.zohorecruit.com/jobs/Careers

click job opening, click relevant position

We regret that only shortlisted candidates will be notified.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Job Responsibilities

• Provide L2 technical support and advice to users on systems-related issues or queries
• Perform administration/maintenance and works toward continuous optimization of systems performance related to Microsoft 365 & MDM product e.g. Jamf Pro / School
• May need to be on standby with on-call availability with varied shifts including nights, weekends and holidays during critical cutover or L1 incident management
• Provide technical support for multiple customer environments on End User Devices operations
• Provide support for Apple operating systems (OS) – iOS / iPadOS, MacOS, etc., end-users software and applications
• Develop and maintain technical documentation related to user guide, process & procedure, User Acceptance Testing (UAT), configurations, troubleshooting, etc., for all Microsoft 365 & applications and services of MDM products
• Work closely with Tech Lead and Operation Managers to deliver operational service excellent to meet customer expectation
• Provide support to project implementation and documentation.
• Work closely with Project Manager to deliver high quality project implementation
• Develop and maintain the scripts used to manage / support Jamf environment
• Any ad-hoc duties as assigned

Job Requirements:-

• At least Diploma in any IT related courses
• At least 2 - 3 years of IT experience. ICT experience in providing end user devices support / migration / implementation.
• Fundamental knowledge of Microsoft 365 (Microsoft Teams, SharePoint online, Exchange Teams and Entra ID)
• Familiarise with endpoint device management tools MDM products - Jamf Pro / School
• Basic knowledge of others endpoint devices operating system (OS). Windows 10/11, Chromebook and Android
• Candidates are required to handle clients professionally during all interfaces, and are customer oriented, and work effectively both independently and in a team environment
• To have Apple Device Support certification.
• Office Productivity tools for writing and presentation skills needs.
• Knowledge of IT lifecycle management
• Knowledge of ITSM - Incident Management, Problem Management, Change Management, Asset Management, Patch Management

Interested parties, please click the "Apply Now" below.

We regret that only shortlisted applicants would be notified.

Evonne Png Wen Xuan | REG No : R22105531

PERSOLKELLY SINGAPORE PTE LTD | EA License No : 01C4394

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

We are seeking a Lead Software Engineer with extensive experience in delivering strategic software development projects, particularly in the banking sector. The ideal candidate will lead a development team, design enterprise web applications, and maintain effective client communication.

Key Responsibilities:

• Team Leadership: Manage and mentor a development team of 5 – 10 members.
• Project Management: Provide accurate estimates and oversee project deliverables .
• Frontend Development: Lead front-end development using Node.js, JQuery, Bootstrap, and related tools
• Technical Expertise: Utilize Java, Python, Groovy & Grails, Spring MVC, Hibernate, and other frameworks for full-stack development.
• Banking Experience: Develop secure and compliant banking-related applications.
• Quality Assurance: Conduct code reviews and maintain coding standards.
• Consulting: Propose technical solutions to client challenges and improve system efficiency.
• Product Demonstrations: Present project outcomes to clients and stakeholders.

Qualifications and Skills:

• Experience: 10+ years in software development projects, with a strong focus on banking solutions.
• Leadership: Proven ability to lead development teams of 5 - 10 members.
• Banking Expertise: Hands-on experience with banking systems, processes, and compliance.
• Technical Skills: Proficient in Java, Python, Groovy & Grails, Spring MVC, Hibernate, and frameworks like Node.js
• Frontend Development: Expertise in JQuery, Bootstrap, BackboneJS, and related tools.
• Database: Experience with Oracle, PostgreSQL
• Communication: Strong ability to manage client expectations and liaise effectively.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

Gelangre Reyanelle Gelario | REG No : R1870995

PERSOLKELLY SINGAPORE PTE LTD | EA License No : 01C4394

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Job Description & Requirements

Job Description:

To work with customer to identify and verify the scope of work

To work with customer or customer’s site project manager to develop project schedule

To work with project installation team to develop project installation schedule

To plan weekly work schedule with scheduler for the installation team

To work with project installation team to complete the weekly project monitoring report

To ensure timely progressive monthly project billing

To ensure that work site safety regulations are being enforced

To provide and monitor scope of work on project variation work for salesperson

Ability to work under pressure and resolve problem independently

Job Requirements:

Candidate must possess at least Professional Certificate/Nitec, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic), Engineering (Mechanical), Computer Science/Information Technology or equivalent.

At least 2 Year(s) of working experience in the related field is required for this position.

Preferably Junior Executive specialized in Engineering - Electronics/Communication or equivale

Responsibilities:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with the Contractors of the IWMF and also TWRP.

• With a focus on inter-disciplinary construction management, assist the CRE to coordinate the existing team of discipline Lead Resident Engineers as required, including liaison with our in-house Engineering Design Manager (EDM) on any outstanding design issues that may affect immediate construction activities.

• Lead and coordinate the construction work interface between IWMF contractors and TWRP contractors works and tie-ins etc and in particular with counterpart Interface Manager from TWRP.

• Lead and set up interface meetings between the various Contractors to drive the Contractors to resolve their coordination and tie-in point issues.

• Coordinate with BIM Manager and set up interface BIM walk through sessions as required with the Contractors.

• Project delivery planning updates for the interfacing/tie-in points from the IWMF/TWRP Contractors with a specific focus on MEICA issues given the stage of the project.

• Coordinate and expedite internally on urgent RFA/RFI submissions with regards to interfacing matters, in particular between EPC1 and EPC2 but also with IWMF and TWRP.

• Attend other site meetings as required by CRE and coordinate internally to resolve technical issues with the Contractors with regards to interfacing matters with a specific focus on MEICA issues given the stage of the project.

• Attend and follow-up on interface/coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, interface meetings with TWRP, etc and as required for the coordinated completion of the Works under each contract as they lead into the Testing and Commissioning phase of the project.

Requirements:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

* Office hours, Monday - Friday

* Location: MacPherson

* Basic + Allowances + OT + Bonus

* Permanent

Our client is a company who providing data recovery, storage solution in Singapore.

Responsibilities:

• Delivery and implementation of IT Project.
• Follow process workflow on implementation procedure.
• Update project manager and reported manager / lead on the project status and progress.
• Work with product principle to resolution deployment issue.
• Will be expected to handle multiple projects at any time.
• Willing to learn attitude on assigned task.
• Can work independently and responsibility on task assigned.
  

Requirements:

• Skillset on Virtualization, Windows and Linux Implementation.
• Knowledge of storage, server and backup software will be an advantage.
• Possess a Degree / Diploma in IT / Computer Studies or equivalent.
• 1 to 3 years of working experience in Server Operating System implementation.
  

HOW TO APPLY:
Interested applicants, please click on “Apply Now” or email to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Jason Bong Wee Kiat
EA Personnel Reg. No.: R23116067

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Electrical) for the next phase of their business. They are located in West.

Duties:

• Lead Electrical discipline for CAPEX projects, supervising consultants, contractors, and vendors.
• Develop and issue Electrical design bases, specifications, and scopes of work.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Approve Electrical deliverables and develop necessary project documents.
• Support regulatory approval processes.
• Collaborate with project management and engineering teams.
• Witness factory acceptance tests (FAT).
• Ensure accuracy of engineering databases (e.g., SmartPlant tools).
• Review and document as-built deliverables.
• Follow Quality Management System and QA plans.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 15 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

The Snr EUC Engineer manages the IT support function. He provides management to a group of IT professional and support staff and focuses on setting goals and priorities. He/She plans and directs the information processing activities of the organisation and coordinates the effective design, implementation and operation of management information systems and applications. He oversees the maintenance and upgrading of support systems and conducts on-site training to promote efficient operations.

Implement IT Support Service Plans

• Lead the implementation of support services across the organisation

• Define best practices and Service Level Agreements for the support function

• Establish performance and reporting measures to provide an effective and efficient level of service

Manage IT support Activities

• Identify actions to maintain or improve levels of service

• Advise the business on IT support metrics and capabilities

Oversee System Maintenance

• Prioritise activities to ensure continuity of service and prompt issue resolution

• Oversee the compiling of data for reporting purposes

• Review trends and patterns

• Plan installation of hardware equipment, software and maintenance agreements

• Recommend acquisition of new technology and software

Provide Incident Resolution Guidance

• Analyse enquiries to identify recurring user problems, recommend solutions, and to identify areas where service can be improved

• Respond to more complex, escalated enquiries from team members

• Evaluate results of investigation reviews

• Develop problem solving guidelines, checklists, or other materials to assist staff to respond to user problems that are recurring or routine

• Oversee disaster recovery planning and testing

Requirements:

• Have prior technical knowledge on End User Computing technologies, not limited to Desktop Endpoint Management, Win10 / 11 Security Patch Management, Asset Management, GPO policy management, Active Directory Administration, Win 7 / 10 / 11 migration (plus point), M365 administration (plus point), SCCM & Bitlocker (MBAM) administration (plus point), Software deployment management (plus point)

• Have vendor management experience or have experience managing subcontractors will be an advantage

• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 8+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.