Total 31,371 Others/Any job vacancies in woodlands tuas

Job Description

• Overall management of the warehouse to make sure the stocks are in order, accountable and stock amount is correct.
• Perform store activities that includes ordering, receiving, issuing, inventory counting, housekeeping, data entry and preparing reports
• Responsible for effective operation of all warehouse activities
• Requirements to follow the proper component handling procedures
• Move & deliver stocks around by provided trolleys
• Carry out inventory cycle count as and when required to
• Keep areas of work clean and tidy to ensure operational efficiency, where daily housekeeping is mandatory

Job Requirements:

• Min. 1-3 Years of experience as Warehouse Assistant
• Self-driven personality, attention to detail and good problem-solving skills.
• Excellent time management skills with the ability to multi-task and priorities work.
• Physically fit

Class 3 Driving License will be an added advantage

n The Contractor shall provide integrated managed network services that encompass Network Administration and Management Services.

n Network equipment shall consist of, but shall not be limited to, hardware, software and firmware of network switches, routers, firewalls, intrusion detection systems (IDS), intrusion prevention systems (IPS), virtual private network (VPN) gateway, content engines, proxy, wireless access points, wireless controllers, hardware load balancer, modems, IP PABX, Uninterruptible Power Supplies (UPS), and server hardware. The phase “network devices” shall be used interchangeably with “network equipment”

n Network infrastructure shall consist of, but shall not be limited to, client and the In-Scope Institutions’ LAN and WAN, wireless network (WLAN), extranet connections, peer-to-peer connections to external agencies, Internet connections and the Demilitarized Zone (DMZ). The network infrastructure shall encompass the network services components including but not limited to, Network Time Protocol (NTP), Domain Name Services (DNS), Active Directory, Dynamic Host Configuration Protocol (DHCP), remote access, VPN and Cisco Secure Access Control Server (ACS). The phase “data network” shall be used interchangeably with “network infrastructure”.

n The Contractor shall perform day-to-day network operation for the network infrastructure and network equipment and the In-Scope Institutions’ premises.

o The Contractor shall setup and operate an online network operation management portal as part of the Network Administration and Management Services for general access and the In-Scope Institutions’ end users at no additional cost to the client and/or the In-Scope Institutions. The information presented in the portal shall be up-to-date and shall include, but shall not be limited to, the following:

• (i) Network diagrams and equipment configuration such as IP addresses, firmware and software version for the network equipment in multiple levels, hierarchical details and categorized by respective In-Scope Institutions.
• (ii) Physical layout and location of the network equipment per each Site.
• (iii) Configuration change history of the network equipment.
• (iv) Cable plant inventory inclusive of labels and tags information.
• (v) UPS inventory inclusive of capacity, usage, support and maintenance details.
• (vi) Online job requests submission and job requests status.

(vii) Incident reports status and workflow for tracking of escalation and resolution

The NTU Office of Commercial and Auxiliary Services (OCAS) oversees the management of estate leases and commercial services (such as leasing of spaces for F&B, amenities & lifestyle services), and auxiliary services (such as car parks and shuttle bus services) for NTU’s main campus, Novena campus and NTU@one-north campus.

OCAS is looking for a dynamic and adept individual to be part of the team to manage transport services under the Auxiliary Services team, including the campus shuttle bus services, car parks and EV charging facilities for the University.

Key responsibilities:

• Ensure good governance and administration of contracts with vendors for bus, car parking and EV charging services.
• Manage relationships with key stakeholders of the University and relevant government authorities.
• Prepare transport budget, reports and keep track of financial targets.
• Monitor & track services rendered by providers in accordance with contract requirements.
• Ensure service standards are complied with and seek improvements to enhance customer satisfaction.
• Implement campus mobility plans and work with other providers to explore new opportunities.
• Represent OCAS in working groups with other departments to conduct feasibility studies, identify gaps and seek solutions for the services.
• Work on the technology roadmap together with the transportation plans to provide efficient and eco-friendly transport solutions.
• Manage staff and external service providers to provide quality frontline services and project support.
• Benchmark the department with industry best practices, advise on industry/market development and develop recommendations for the department to stay in the lead.
• Serve as OCAS Safety Liaison Representative of Health & Safety Committee

Requirements:

• Degree in any discipline. Diploma holders with extensive experience in the transportation function may be considered.
• Minimum 3 years of relevant experience in managing administration / procurement, contracts management, financial transactions, and operations management, preferably in the transport industry or in an Institute of Higher Learning.
• Proficient in Microsoft Office applications (Word, Excel, PowerPoint, Outlook)
• Excellent communication skills
• Strong problem-solving skills
• Team Player

Job Description

- Knowledge of Partial accounting

- Perform accounting entries

- Familiar with MYOB software

- Issues invoices, process cheque payment and checking and

reimbursement of petty cash receipts

of petty cash receipts

- Prepare payment vouchers and data entries keying in

Job Requirement

- Diploma in Accounting

- Minimum 2 years working experience

- Good working attitude

Requirement

• ITE , Secondary or GCE `O Level
• Able to work on weekend
• Preferably with class 3 driving licence and working experience in related field

Duties & responsibilities

• Repair & maintenance work
• Provide technical support & responsible for the quality of work
• Overhaul, dismantle, re-assemble , cleaning and painting of valves
• Cleanliness of the work area
• Prepare documentation and report as and when required
• Travelling overseas if job required
• Ad Hoc Duties

Staff benefits

• Training provided
• Transport allowance
• Transport provided at pick up point
• Long Service award
• Profit sharing
• Yearly health screening

Responsibilities :

• Ensure that all task perform on the shop floor adhere to safety protocols
• Accurately reads and understands engineering drawings and work instructions
• Fabricate quality parts, meeting production schedules and time lines for delivery
• Perform production related or ad hoc duties as assigned by the Foreman or Management
• Setup and operate CNC machine tools to machine parts to required specifications as in drawings
• Take measurement using instruments or gauges and documents quality check
• Marked parts identification, maintain a clean and organized work area

Requirements:

• O Level/Nitec in Precision Engineering
• Minimum 1 year experience in Machine Shop
• Understanding of precision engineering drawings
• Knowledge and experience in operating CNC machines

Job Responsibilities:

• Prepare, Process and Follow up on Sales Orders.
• Review customer’s requests and prepare quotation in response to customer enquiry.
• Perform order entry duties accurately and in a timely basis.
• Generate manufacturing documentation to manufacturing planning for creation of Production Order.
• Review Delivery Orders to ensure error-free before goods delivery.
• Update and maintain delivery schedule or re-schedule.
• Update of Sales Order status.
• Prepare weekly or periodic reports of compiled orders.
• Others ad-hoc duties may be assigned.

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Sales Coordinator or Shipping Assistant
• Preferred with knowledge of SAP
• Preferred with knowledge of Shipping process
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

You will play a pivotal role in one of A*STAR flagship programme as a Business Lead. You will be responsible to look for companies to join the programme's ecosystem and drive projects as the outcome to create impact to Singapore Supply chain innovation. You will also be tasked to manage business accounts to maintain customer relationships to strategically drive projects for long-term growth.

JOB DESCRIPTION

• Generate leads, prospect new businesses by networking, or through other means of generating interest from potential clients
• Take ownership of customer accounts, manage and strengthen relationships with executive C/B-level stakeholders
• Build key customer relationships, identify business opportunities for growth, negotiate and close business deals
• Work closely with the technical team and lead translation of research outcomes to business viable products
• Lead conversations with customers to capture business and technical requirements to provide proposals for projects
• Coordinate and integrate not only ARTC but also sister research institutes to deliver business viable solutions
• Maintain customer relationships to strategically place new products and drive projects for long-term growth
• Create and implement business plans, prepare and conduct commercial growth presentations
• Lead translation of research outcomes to industry adoption

JOB REQUIREMENT

• Bachelor in any engineering and science related discipline
• Experience working in the clean energy sector would be an added bonus
• Proven track record of successful business deals closure
• At least 3 years of working experience in B2B business development, enterprise sales/account management or marketing
• Strong business acumen, driven to deliver customer
• requirements and project deadlines
• A team player and technically motivated to solve problems, innovate and deliver to internal and external customers
• Professional presentation and communication skills for the management-level audience, both written and verbal.
• Positive attitude, resilient and agile, quick to adapt to changing priorities in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Duties & Responsibilities

- Driving Hook Lift Truck to deliver Open Top Containers to site ( island wide ) accordance to schedule.

- Ad-hoc duties

Requirements:

- Class 4 driving license

- Professional attitude towards driving vehicle

- Be reliable, punctual and motivated with a strong work ethic

- Able to work 6 days per week

Avantus is an Authorized Training Provider and Partner for many vendors, offering both end-user and technical courses in Singapore and funded courses is within your reach.

We are looking for a highly-driven and motivated Sales Executive to join our team. If you are looking for an opportunity to gain value-added experience and exposure, this is the place for you!

As our Sales Executive, your main responsibility will be to drive our business success by building a strong relationship with new & existing accounts. Your main goal will be to turn leads and opportunities into paid sales, in order to meet & exceed sales target.

Successful candidates should demonstrate a keen interest in the domain of Training and Certification, Skills and Learning.

The successful candidate will be responsible for establishing new customers, manage existing Enterprise accounts and will hold a sales target.

He/She will engage directly with Customers/Partners, maintain and grow relationships through our extensive catalog of learning products and services.

• Meet sales and exceed sales targets.
• Meet reporting and performance expectations.
• Engage and co-ordinate on sales campaigns.
• Manage and grow industry contacts and brand awareness.
• Maintain the highest levels of business ethics.

Job Responsibilities:

· Provides administrative support to ensure efficient operation of office.

· Answers phone calls, schedules meetings and supports visitors.

· Carries out administrative duties such as filing, typing, copying, scanning etc.

· Exhibits polite and professional communication via phone, e-mail, and mail.

· Supports team by performing tasks related to organization and strong communication.

· Provides information by answering questions and requests.

· Contributes to team effort by accomplishing related results as needed.

· Any other adhoc duties as assigned

Working Hours: 0830 – 1800 (5 Days Work Week)

Skills and Qualifications:

· Microsoft Office Skills

· Managing Processes

· Organization

· Analyzing Information

· Professionalism

· Problem Solving

· Communication Skills

· Auto-motive experience preferred

Create drawings and models from written and verbal specifications obtained from Project Engineer.

Work with Engineers regarding model accuracy, design, drafting standards and design documentation.

Work closely with Designers, Drafters, and Engineers to ensure coordination design effort is maintained.

Complete project responsibilities within scope, budget and schedule.

Review drawings for completeness and accuracy.

Maintain all revisions of project drawings.

Update and maintain drafting log.

Develop 3D models by analyzing prototypes and 2D drawings.

Examine and check engineering drawings for compliance with cited specifications.

Provide timely technical assistance and solutions to the team.

Participate in project meetings and conference calls

RESPONSIBILITIES:

• Assist in the Recruitment processing, Job posting, and Job application / Renewal
• Preparation of employment contracts
• Processing worker’s repatriation
• Liaising & correspondence with Government agencies
• Handling phone calls and ensuring telephones calls are directed accordingly to specific person/team at all times.
• Responding to government surveys.
• Handling Work Injury reporting to MOM and processing its insurance claims
• Handles and process company Insurance
• Performs other ad hoc duties when necessary

REQUIREMENTS:

• Atleast 3 year of experience
• Proficient in PC applications such as MS Word, MS Excel
• Able to work overtime
• Ability to work under pressure and tight deadlines

JOB DESCRIPTION AND REQUIREMENTS

Immediate vacancy for Class 3 or 4 Drivers

Singaporeans and Singapore

PRs only

You can chose any vehicle (10ft / 14ft / 18ft / 24ft / prime mover)

Attendants will be provided for a trips.

Class 3 and 4 drivers

Working hours - 6 days a week, 12 hrs a day. (8 am to 8 pm)

Salary

$4000 to $5000 based on qualifications and experience

Detailed Job Description.

1. Load and unload recycle, confidential papers/materials and materials

2. Precisely finish all paperwork connected with the conveyance of the materials.

3. Deliver and collect products, materials, and staff to and from areas where they are needed

4. To ensure that recycle, confidential papers/materials and staff are protected and secured

5. Answer clients’ inquiries and direct them to the company sales and marketing staff.

6. Ensure timely conveyance of staff and materials to and from places as instructed by supervisor or the manager

7. Ensure that vehicles are always kept perfect and clean by washing both the inside and outside parts of the vehicle

8. Carry out routine checks on vehicles and ensure they are always serviceable.

9. Recognize electrical and mechanical faults and report to the operation manager or technician

10. Report any instance of mishap or accident to the dispatcher or supervisor

11. Perform periodic maintenance on vehicles, such as changing batteries and motor oil at appropriate time, as well as refuelling the vehicles.

12. Report any case of accident, injury or damage of vehicles to the supervisor or manager

13. Keep all records, including receipts for vehicle maintenance

14. Keep up a travel log to record areas travelled to, travel time, and work hours

15. Perform some other undertakings like shopping, dropping and picking clothing, getting lunch, and running errands

16. Pay ERP charges/ IP charges and other fundamental vehicle demands

17. When no collection, work in the plant as instructed by the plant supervisor.

Dress professionally and in accordance with company’s dress code.

Location: North (Woods Square, Woodlands Central)

PlayFACTO School is dedicated to being the learning partner of choice through our academic-focused, student-centric programmes rooted in the space of positive education to ensure that every child flourishes. We are constantly seeking like-minded individuals who believe in our mantle and possess the strength of character and burning passion to groom the next generation of leaders.

Start your rewarding career with us!

Roles and Responsibility

• Delivery and presentation of PlayFACTO lesson content to children
• Supervise primary school children (primary 1 to 6) to ensure completion of daily homework and spelling
• Ensure safety and timely transfer of students from school to student centre
• Ensure the safety of children in class
• Regular liaison with parents and caregivers to provide feedback on children’s behavioural and learning progress
• Upkeep cleanliness and hygiene of centre premises
• Any other ad-hoc duties as assigned by Centre Head/Director

Requirements

• Diploma or higher in any discipline
• WSQ Student Care / Early Childhood certificate or equivalent will be a plus
• 2 years of teaching experience with children, preferably at the primary level
• Possess good communication and classroom management skills.
• Possess excellent work ethics and integrity and exhibit a positive attitude
• Possess a passion for nurturing children
• Experience in working with children is preferred. Those without experience may also apply and will be considered
• Singaporean or PRs only

If you're keen to join us or have enquiries, please apply here or send your resume to [email protected].

1. Design and Drafting:

- Use computer-aided design (CAD) software to create detailed engineering drawings and plans.

- Assist in the design process for various projects, such as buildings, machinery, or electronic systems.

2. Testing and Quality Control:

- Conduct experiments and tests to evaluate the performance and reliability of products or systems.

- Implement quality control procedures to ensure that products meet industry standards and specifications.

3. Technical Support:

- Provide technical support to engineers or other team members in the development and implementation of projects.

- Troubleshoot and solve technical problems that may arise during the design or manufacturing process.

4. Maintenance and Repair:

- Perform routine maintenance and repair of equipment or systems to ensure proper functionality.

- Diagnose and address issues with machinery or electronic systems.

5. Project Management:

- Assist in project management tasks, such as budgeting, scheduling, and coordinating activities to ensure project goals are met.

- Collaborate with cross-functional teams to achieve project objectives.

6. Installation and Commissioning:

- Participate in the installation and commissioning of new equipment or systems.

- Ensure that installations meet safety and performance standards.

7. Documentation:

- Prepare technical documentation, including manuals, reports, and specifications.

- Maintain accurate records of engineering activities and project progress.

8. Research and Development:

- Contribute to research and development efforts by staying updated on industry trends and incorporating new technologies into

Responsibilities:

- Fetch workers, construction materials and documents

- Manage daily delivery

- Delivery document according to the instruction

- Maintain company vehicle cleanliness and good condition

Requirements:

- Possess Class 3 driving licence (with a clean record) for the past 3 years

- Able to perform overtime

- Physically fit, good working attitude and committed

Data Management and preparation of statistical reports

• Status tracking, including collecting, analysing, summarising/dashboarding for regular reporting of proposals and awarded grants, technology disclosures and publications:
• Awarded Grants: Liaise with other offices (Finance, PMO, SIMTech IDO, ARTC BDO) to consolidate data
• Technology Disclosures: Liase within RDO to consolidate data
• Publications: Liaise with SIMTech and ARTC Divisions and A*STAR SERC Planning to consolidate and align data
• Consolidate statistics and provide regular reporting to SIMTech, ARTC and SERC
• Carry out periodic update of Staff List and Affiliations for up-to-date reporting
• Continuous improvement to enhance data capture and information flow across departments
• Management of RDO shared folders and archival of documents for Grants, Technological Disclosure and Publications

Digitalisation and Dashboards

• Update (as required) and maintain Power BI Dashboard for pipeline proposals
• Design and maintain Power BI Dashboard for Technology Disclosures and Publications
• Propose, develop, maintain, and automate process approval workflows for all RDO-related approvals

System maintenance and updates

• Own, update and maintain TD system including troubleshooting and updating of approval workflows
• Design, build and maintain S&A Knowledge Management System (connecting Research Personnel, Technology Disclosures and Publications)

Intranet Page and Portals

• Maintain RDO intranet page with up-to-date information on Technology Disclosures and Publications
• Set up and maintain lists for Scopus and Scival portals
• Support RDO activities and tasks, as required
• Cover other RDO job functions, as required

EDUCATION QUALIFICATION

• Diploma or Degree in administration or science or engineering

JOB REQUIREMENTS

• Meticulous and attention to details
• Good command of PowerPoint and Words functionality for reporting
• Good command of Excel and Power BI for data management and dashboarding
• Good analytical and problem-solving skills
• Knowledge on research/technical terminologies
• Good communication, interpersonal and stakeholder engagement skills
• Able to multi-task and deliver results under tight timelines

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Operating of Grab Machine to excavate underground soil and rock.
• Involved in assembling and dismantling of Grab Machine throughout the whole project.
• Daily maintenance of Grab Machine.
• Require crawler crane license.
• Must have deep knowledge in mechanical of the Grab Machine.
• 5 years foundation working experiences in operating of Grab Machine in LTA project.
• Working in various construction sites across Singapore

We are in specialised building related materials business, related to the field in noise control.

We promote our products to designers like architects, interior designers, building engineers and owners.

You must be able to read architectural drawings in order to make recommendations and proposals to the designers and clients.

Element has an opportunity for a Test Technician to join our rapidly expanding team.As a member of the operations team, the Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under direct supervision.

This role is based in Jalan Boon Lay, Singapore.

Job Duties:

• Perform counting on gold jewellery
• Quality Check on Hallmark conditions
• Perform Hallmark on Gold Articles

Job Requirements:

• Able to work under laboratory setting for fire assay and XRF
• Good eyesignt (with our without glasses) and strong attention to details
• Good communication skills
• Able to work independently with minimum supervision as well as a team player

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

• Accounting Knowledge
• Handles accounts receivables / payables and Purchase Order
• Issue monthly fixed invoices to client
• Monitoring and ensure all invoices are sent to client especially for maintenance department and project team
• Send monthly SOA
• Remind clients to make payments
• Petty cash recording
• Handles all bills and monitoring on payments to vendors
• Monthly OT monitoring & calculations
• Able to use accounting software but not essential as training will be provided
• Minimum Diploma in Accounting related certifications
• Able to start work immediately or within 2 weeks

The School of Materials Science and Engineering (MSE) at NTU invites applications for the position of Research Fellow. The Research Fellow will be involved in the chemistry, physics, applications, and deployment of bare and coated magnetic particles.

MSE provides a vibrant and nurturing environment for staff and students to carry out research in key areas. The School is consistently ranked in the top 3 worldwide. MSE is equipped with various types of apparatus and equipment for both teaching and high quality research. MSE seeks to aggressively develop and commercialize technologies based on a NRF/CRP-funded project: Directed Energy Materials for Advanced Manufacturing. This technology aims to deploy induction technology for the manufacturing of sustainable composites, plastics etc. in industrial sectors such as automotive, sports, and green energy.

Key responsibilities:

• Develop the chemistry, physics, applications, and deployment of bare and coated magnetic particles for directed energy applications.
• Develop induction systems for deployment of the particles in applications
• Synthesis, characterization and property evaluation of magnetic materials and polymers.
• Develop induction systems for deployment of the particles in applications.
• Research design and deploy industrial demonstrator.
• Manage and deliver project KPIs and objectives per plan
• Ensure milestone delivery per plan/schedule, manage/control project risks & mitigating actions
• Prepare/consolidate periodic reports (finance, technical) as required
• Manage project documentation, knowledge/data capture and reporting
• Manage logistical issues and laboratory inventory
• Ensure compliance with health and safety in all aspects of the research work
• Generate technical reports, write journal papers, and liaise with collaborators.
• Collaborate with industrial partners to commercialize and spin-out technology platforms.
• Research design and deploy industrial demonstrator.

Job Requirement

• Minimally PhD degree in Materials Science and Engineering or closely related discipline,
• Knowledge of synthesis, characterization and property evaluation of high-performance materials
• Knowledge of manufacturing technologies
• Energetic and self-motivated
• Excellent interpersonal and communication skills, and ability to work in a diverse, interdisciplinary research environment.
• Experience in schedule and resource planning.
• Ability to work well with multiple competing priorities, manage projects and meet deadlines.
• Ability to work independently and as part of a team with strong initiatives.
• Evidence of research output, communication, and interpersonal skills.
• Familiar with the synthesis, characterization and property evaluation of magnetic materials and polymers
• Strong record of scientific/industrial impact within a composites/materials/engineering sector
• Strong communication skills, an energetic, self-motivated and can-do attitude and ability to effectively interface with vendors is vital.
• Strong expertise in areas related to directed energy materials for advanced manufacturing

We regret that only shortlisted candidates will be notified.

Roles & Responsibilities:

• Perform data entry and general administrative matters
• Calling merchants to confirm appointment time
• Prepare sticker printing for shipment
• Mail of normal and registered letters
• Monitor daily sales and stock level
• Manage devices and follow up on faulty device status
• Attend to walk in customers for card collection
• Sorting and keeping proper record of devices
• Any other ad-hoc duties as assigned by the management

Requirements:

• GCE “O” Levels
• Proficient in MS Word and Excel
• Able to resolve issues independently
• Good at multi-tasking and good team player
• Keen to learn and has good working attitude
• Able to speak Mandarin to communicate with each other

We are looking for safe and competent drivers for transportation of goods via Container, Isotank or Loose Packages.

Responsilibities:

• Comply all Road Traffic, Port & Customers rules and regulations.
• Ensure proper housekeeping, serviceability and basic maintenance of fleet assigned.
• Ensure the safety and security of the goods during transportation.
• Record and report all goods moved.
• Raise any near-miss, safety breach or vehicular maintenance matters.
• Record and report any incident/ accident.
• Assist to load and unload goods from Isotank or Loose Packages.
• Minimum 1 year relevant experience with Class 4/5 driving licence.
• Please contact 63078011 for walk-in interview.