Total 25,711 job vacancies in SGP - Tuas South Ave 6

Job Description:

• Monitor and troubleshoot incineration plant operation and process control equipment for smooth operation
• Develop operation procedures and methods for optimum operation (i.e. lower operation cost, minimum manpower utilization, maximize machine capacity)
• Develop and practice Preventive Maintenance Schedules and regular maintenance schedules
• Prepare and monitor operation data sheets and records
• Regular patrolling and inspection of machine and equipment conditions and staff's duties
• Monitor and brief staff's safety regulations at work
• Monitor and supervise good house keeping practice at incineration plant
• To plan proper schedules of steam distribution as well as arrange advance notice to other department if there is any interruption in stream supply
• Strictly follow ESH procedures, issue all necessary PTW and monitor contractor works
• To compile and review monthly operation reports (e.g. cost, productivity, quality, non-conformances, etc.)
• Comply with legal requirement such as NEA continuous air emission monitoring unit, PUB sewage water discharge limit, MOM boilers inspection, air compressors and etc.

Others:
• To undertake any other duties that may be assigned by the Management from time to time
• To assist and support the Operation Maintenance of Incineration plant for Technical support (advice, material selection, purchasing order, maintenance history records, and preventive maintenance plan)
• To train and guide the Incineration staff for operation and maintenance for continuous improvement

Requirements:
• Candidate must possess at least a Diploma/Bachelor's Degree in Chemical Engineering or equivalent.
• Min. 5 years experience in operating incinerator, waste heat boiler, cooling tower and demin water plant
• Steam Engineer Grade 1 or 2, preferably Grade 1
• Prefer to have Managing WAH, confined space and other related certificates
• Able to work 12-hour shift work

Email: [email protected]

We are looking for a Solar Project Engineer who is passionate about deploying solar energy in Singapore. The successful candidate will be in charge of executing solar projects on roof tops all across Singapore and the region.

Job Requirement

• Design, build and install solar energy systems
• Onsite planning and managing of installation teams
• Contact point between the company and client during construction stage
• Create and execute project work plans and revise as appropriate to meet changing needs and requirements.
• Hands on implementation on site
• Design the full construction from pre to post-construction and handover of the system to the client
• Complete assigned projects on schedule and within budget
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks
• Ensure all required Environmental, Health and Safety requirements are met.
• Prepares for engagement reviews and quality assurance procedures.
• Ensure smooth delivery of the project completion/SystemTurn On

Skills and Competencies

• Excellent communicator who is able to work independently
• Diploma/Degree in Electrical Engineering or related fields
• 3-5 Years of experience in project management
• Candidate with experience in solar project execution will be in advantage
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative and passionate about renewables
• Singaporeans/PRs only

** ONLY Singaporeans/ PRs may apply ** No Agents Please**

Responsibilities:

· Perform QC inspection at various stages of production and identify non-conformance quality issues.

· Perform QC inspections on incoming, WIP and outgoing parts in accordance with work instructions

· Liaise with relevant stakeholders for any material quality-related issues and closely follow-up effectiveness and closure of corrective actions.

· Collaborate with the Engineering team to define and implement quality control requirements.

· Prepare QC report and status update to relevant stakeholders.

· Maintain all QC document master list including including Mill Certificate / test report for all materials used in project.

· Maintain calibration status of Company’s equipment.

· Familiar with welding process such as SMAW, GTAW, SAW

· Any other ad-hoc duties as assigned.

Requirements: ·

· Minimum Diploma in Quality Engineering / Mechanical Engineering or equivalent

· Possess strong analytical skillsand meticulous individual

· Proficient in Microsoft Office

· Able to work both independently and as a team.

· Knowledge of ISO 9001, 14001, 13485 & 45001, FDA will be an advantage

· Preferable if able to commence work immediately

Underwater Shipcare (Pte) Ltd is an independent Singapore based company specializing in providing underwater ship maintenance and repair to the shipping industry in Singapore for the past 34+ years.

We are looking for a Relief Driver for a duration of one week to perform the following job scope :-

- Pick up divers at pick up points and send to work boat.

- Send items and documents to divers / clients / service providers.

- Purchasing of office and operations items.

- Any other jobs instructed by the Management.

- Class 3 driving licence required.

- Cabstar Lorry provided (able to bring home).

SINGAPOREANS only and those living in the West preferred.

Brief Summary:

• Basic $1800, Gross $4000++
• With incentive Up to $2800 + Commission
• Monday to Friday - (8am to 6pm), (8am to 5pm)
• Pet supplies distributor industry
• Company vehicle provided
• Career development opportunities

Job Description:

• Build and maintain strong relationships with customers
• Develop and present compelling sales proposals
• Negotiate and close deals to achieve and exceed sales goals
• Provide excellent customer support and resolve issues

Job Requirement:

• Possess Class 3/3A Driving license
• 1 year experience in sales or key account management

Interested applicants, kindly click "Apply” or Whatsapp to "8915 1703"

We regret to inform you that only shortlisted candidates will be notified.

Kaylene Chee Hui Ying | EA Reg No: R1873833

PIKJOBS Recruitment Pte Ltd | EA Lic No: 24C2352

· Assist the Customer Service Manager to oversees the day-to-day operations of the warehouse, order tracking, operations and customer service.

· Coordinate warehouse operations (inbound processing, inventory, order fulfilment) and direct day to day activities of warehouse personnel.

· Keep the pulse of customer satisfaction

· Manage account/customer expectations

· Process customer orders and routings.

· Coordinate freight shipments and transport arrangement

· Import/export permit declarations and customs clearance

· Prepare billing.

· Perform other ad-hoc duties when assigned.

Job Qualification

· Possess at least Higher secondary/Pre-U/A level/College in Logistic/Transportation or equivalent.

· Preferred 2 Year(s) of working experience in the related field is required for this position.

· Required language(s): English, Mandarin

· Proficient in Microsoft Office applications (Outlook, Excel & Word)

· Custom Declarant -import and export permits an advantage

· Experience in managing sales, financial and corporate management.

voestalpine Böhler Welding, part of the globally leading steel and technology group, is a leader in the welding industry with over 100 years of experience, more than 50 subsidiaries and more than 4,000 distribution partners around the world. Our extensive product portfolio and welding expertise combined with our global presence guarantees we are close when our customers need us. Having a profound understanding of our customers’ needs enables us to solve demanding challenges with Full Welding Solutions.

For the voestalpine Böhler Welding Asia Pacific Pte Ltd of voestalpine Böhler Welding Group, we are looking for a:

Specialist Finance

Description of the job:

• The role requires a hands-on approach, where the candidate is expected to handle all finance-related tasks independently, managing the entire process from start to finish
• Handle full set of Accounts in Account Payable, Account Receivable, other Accounting Tasks
• Process vendor invoices payment.
• Process expense claims and ensure compliance with company policy. Ensure expenses are classified correctly into the general ledger accounts and cost centres.
• Process incoming and outgoing inter-company billing and reconcile monthly inter-company balances to ensure timely and complete reporting.
• Process debit and credit notes.
• Perform monthly dunning process and send balance statements to customers.
• Work closely with sales and customer service teams for following-up collection from customers.
• Regular update of receivable ageing and submission to sales and management.
• Reconcile customer accounts where needed.
• Monthly bank reconciliation and balance sheet schedule preparation.
• Perform monthly closing process and intercompany reconciliation.
• Correspondence with banks on LC documents and formalities.
• Process monthly provision and adjustment of prepayments.
• Maintain proper filing of accounting records.
• Prepare tax and audit schedule.
• Other task assigned by the superiors

Requirements:

• Technical Competence: Strong experience with SAP and familiarity with IRAS reporting.
• Independence: Ability to work autonomously, as the manager is based in Jakarta.
• Maturity: Demonstrates good judgment, problem-solving skills, and reliability in a remote supervision setting.
• Candidate must possess at least Professional Certificate / NITEC, Diploma/Advanced/Higher/Graduate Diploma in any field.
• Minimum 5years of relevant working experience in accounting and have knowledge in taxation.
• Experience working independently, with minimal supervision, and in a regional or remote management setup.
• Strong understanding of accounting principles and practices, particularly in AP/AR functions.
• Excellent communication and interpersonal skills to work closely with both local and remote teams.
• High attention to detail and accuracy in financial reporting.
• Ability to prioritize tasks and manage time effectively.

We approach to performance-oriented people with both expertise and social skills, who are willing to live our values (http://www.voestalpine.com/welding/Company/About-Us). You will benefit from a varied and long-term professional development as well as an inspiring and appreciative working environment. Within this interesting and challenging position, you can make a valuable contribution to the corporate success in a global team.

Responsibilities:

• Develops and update piping specifications according to P&lD, contract scope of work (i.e. GTD, SOW) and class/rules requirement (ABS, DNV), etc.
• Builds Caesar II model for pipe stress analysis and Prepares pipe stress philosophy, pipe stress critical line list
• Analyze calculation output and guide piping deigners
• Runs pipe stress analysis and conduct checks (stress, deflection, equipment nozzle, flange, fatigue, blast case if applicable)
• Optimize support load if the load is found too high and provide solutions if stress results fail
• Generates load restraint summary for pipe support modellers and stress Isometric and/or stress mark up
• Prepares report for clients and resolve owner comments
• Issues pipe stress analysis report and perform trunnion calculation
• Updates Caesar.II model base on modeller feedback/site feedback and conduct all relevant stress checks
• Verifies types of primary pipe support based on pipe stress analysis results (rest, guide, hold-down and line stopper)
• Performs visual check and calculate pipe support load for non-critical line
• Performs Compressor equipment check, Expansion joint check and Spring hanger in stress analysis.
• Carries out inspection at site and onboard vessel to do as built

Requirements:

• Minimum Bachelor Degree in Engineering
• At least 5 year of piping engineering related working experience or similar activities as described above
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building, FPSO projects (both topsides & marine)
• Understand class/rules requirement such as ABS, DNV, etc
• Understand P&IDs and other related piping items (i.e. equipment specifications, etc)
• Able to conduct stress checks and piping related checks
• Able to communicate & write in English
• Able to work overtime when required

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

In this role, you will have the unique opportunity to engage in Software Programming, Electrical Design, develop, prototype the hardware and software of equipment.

We're looking for motivated engineers willing to work in a quality driven environment with a keen sense of product development to produce technologically superior products. One thing is for sure, you will be working closely with an experienced team, that will always make you feel that you a part of a dynamic organization.

Responsibilities

• Responsible for selection of electrical components.

• Design and updating of electrical drawings

• Responsible for software programming (PLC), testing and commissioning of machine.

• Coordinate with relevant department to meet customer requirement and on time delivery.

Requirements

• Degree/Diploma in Electrical Engineering

• Experience in Electrical circuit design.

• Experience in PLC / C# / C++ programming.

• Entry Level candidates are welcome

• Prepare material and tools as stated in the set-up sheet.
• Set up and operate the CNC Milling and Turning machine.
• Checking critical features and dimensions.
• Report on a blunt or broken tool.
• Report on material requires for production at a low level.
• Compliance with ISO 14001 objectives.
• Perform proper maintenance procedures, keeping the machine/tools and workplace clean.
• Higher Nitec/Nitec with relevant experience.
• Minimum 2 years of hands-on experience for those without Higher Nitec/Nitec
• Knowledge of CNC lathe and machining process.
• Knowledge in interpreting drawing.
• Adhere to Environment Health and Safety requirements at the workplace.

Chin Leong Construction Systems is a Specialist Contractor for an established range of Waterproofing and Floor Coating systems as well as a Manufacturer and Distributor of Waterproofing, Floor Coating and Construction Chemicals products. Presently, we are engaged in several project contract works.

As part of our succession plan, we invite aspiring candidates to apply for the following position:-

SITE SUPERVISOR

Requirements:

· Proficient in the English language.

· Min Secondary School/ITE/ITC/NTC.

· Some experience in the building construction industry is an advantage

· Possesses Building Construction Supervision Safety Course

· Work-at-height Course for Supervisors

· Possess Singapore Class 3 driving license.

· Able to work overtime

· Right attitude with good interpersonal and communication skills.

· Team player and result-oriented

Interested applicants please forward detailed resume with expected salary to:

HR Department

2 Tanjong Penjuru

Singapore 609017

Fax: 6265 1240

Email: [email protected]

Only shortlisted candidates will be notified

1. understanding of the Singapore Employment Act and labor laws to ensure fair employment practice is being conducted in the company.

2. hiring and onboarding process for new hires to ensure smooth integration into the company and team appointed.

3. monitor performance kpis and goals to determine employee promotions or terminations

4. collaborate with the senior management to align HR strategies with our business objectives.

5. ensure payroll and compensations is calculate accurately and disbursed on time.

6. oversee the recruitment and selection process to ensure fair employment is being conducted.

ELECTRONIC PROCESS ENGINEERING TECHNICIAN

Roles:

Process Technician will be part of the Operations Team responsible for ensuring Operations processes run smoothly as per production plan. The incumbent is expected to be proficient in troubleshooting and resolving operations and process issues.

Responsibilities:

· Responsible to conduct daily audit on operation process flow, ensure equipment is intact, and necessary safety protection devices.

· Observe workers closely to make sure all equipment/parameters is being used/follow properly and maintained to the correct standards.

· Provide technical support to manufacturing processes, perform root cause analysis and work to reduce any defects

· Manage safe start up and shutdown of process/unit

· Ensure routine tasks and operations checklists are completed as scheduled

· Issue and close safe work permits and ensure work activities are carried out safely

· Ensure proper handover and takeover during shift change

· Participate in Environment, Safety, Health and Compliance programs

Requirements:

· Singaporean/PR with maintenance (mechanical) technician background

· At least 2 years’ of relevant experience in a manufacturing

· Strong interpersonal skills

· Proficient in Microsoft Office

· Must be able to write and communication in Mandarin and English

· Good team player, with strong self-initiative

· Willing to work in Jurong area

Kindly state full details of qualifications, experience, current and expected salary in your resume.

We regret that only shortlisted candidates will be contacted

Roles & Responsibilites:

Purchasing

• Liaise with vendors, obtain quotes and prepare Purchase order
• Contact vendors to confirm purchase order details
• Log all order receipts and confirmations
• Cross-reference product deliveries with purchase orders
• Track and monitor purchases for shipment, verify invoices and etc
• Prepare monthly reports listing all purchases, return and related cost

Accounting

• Ensure purchase order and invoices are attached with supporting documents and approved by authorized manager
• Raise purchase order input invoices, DO and etc into the system
• Issue tax invoices
• Sort out and organize work order, receipts, purchase order and other documents
• Update report
• Process payment
• Any other ad hoc duties as assigned

Requirement

Diploma or related qualification

Minimum 2 years experience in purchasing, procurement or administrative roles

Must be able to communicate well and work independently

Work experience as an purchasing & accounting assistant

Essential Functions

• Read shop drawings and wiring diagrams

• Read Bills of Materials (BOMs) to determine component parts and assembly sequences of electromechanical units

• Make electrical connections according to specifications

• Assemble parts, and position, align, and fasten assemblies, subassemblies, using hand tools and power tools.

• Modify parts by drilling, tapping, countersinking, etc. machine tools, power and pneumatic hand tools.

• Position, align, and adjust parts for proper fit and assembly.

• Measure parts to determine tolerances, using tape measures and precision measuring instruments such as micrometers and calipers.

• Attach labels and mark identifying information on parts.

• Adhere to all company policies, guidelines and practices including the SECRIT values.

Additional Duties

• Cross training to work in other functional department of the plant

• Other duties as assigned by management.

Knowledge, Skills, and Abilities

• Tool selection — determining the kind of tools and equipment needed to do a job.

• Oral Comprehension – The ability to listen to and understand information and ideas presented through spoken words and sentences.

• Ability to operate cordless hand tools, power tools and pneumatic tools.

• Ability to read shop drawings and wiring diagrams preferred.

• Ability to read standard tape measure.

• Ability to work in a cohesive team environment.

Responsibilities:

* Manage teams of sales representatives.

* Plan and execute sales penetration and promotion campaigns

* To train sales representatives on sales techniques and accompany new representatives on sales calls in order to mentor them, according to Pharmaceutical Products.

* Supervise medical reps on the field to develop and improve selling skills

* Analyse market situation to support business decisions

* Coordinate with marketing department to facilitate implementation of marketing plans

* Ensure team budgets and goals are achieved through effective motivation and coaching

* To hold regional meetings in which they articulate the regional plan of action regarding sales.

* To keep up-to-date on the latest pharmaceutical products in order to have a sense of where these products should be marketed and in order to also effectively train representatives on how to promote products.

* Report to management on the sales performance

Requirement:

* Bachelor Degree or Diploma, preferably in pharmacy/ pharmaceutical/ biomedical sciences/ business-related studies

* Minimum 5 years working experience in pharmaceutical industry in sales

* A commercially acute and customer-focused individual with a solid sales track record

* Strong communication, interpersonal and leadership skill to drive the sales force

* Good in database management and knowledge in using Microsoft Excel

* Ability to foster strong business relationships

* Must possess own transportation and be willing to travel

Job Summary:

Salary: Up to $4,500
Working Days: 5 day work week (Mon - Fri), 8.30am to 5.30pm
Location of work: Tuas (Transport allowance $100)

AWS & VB

Job Responsibilities:

• Lead and Drive First Article Submission for new and existing supplier
• Develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier.
• Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI.
• Work with Sourcing and Engineering, to engage and educate suppliers/sub - contractors.
• Lead quality performance review
• Worked closely with suppliers, to monitor conduct audit for vendor performance.
• Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers.
• Guide Procurement and team for supplier performance review process.
• Supplier Development.
• Drive for vendor development, identify and develop new special process to meet turnkey objective and reduce lead-time of supplier.
• Analyse supply market.
• Propose and execute creative ways to improve supplier process which creates financial value to the organization.
• Maintain good relationship with stake holders and customer/s
• Maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality.
• Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.
• Customer /Third Party Inspection coordinator
• Manage Customer and Third-Party inspection of products/parts.
• Ensure that each Quality Control Plan activity which requires surveillance pointsare monitored and conducted accordingly.
• Perform any ad-hoc duties as and when assigned by the superior.
• Ensures 5S is implemented in the work area.
• Adheres company’s guidelines with regards to Safety and Quality.
• Complies to Company Code of Business Conduct.
• Support and participate in company-wide or departmental programs such as:
  · Total Quality Management, Lean Manufacturing
  · Social Activities

Requirements:
1. Minimum Degree in Technical/Engineering course preferably Mechanical Engineering
2. Experience: Minimum 3-5 years of working on the same field (Experience in Oil and Gas manufacturing is an advantage)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 1 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Description:

· Understanding the requirement of tender documents

· Exercise collaborative plan and define extend of works

· Understanding and achieving within timelines and timely management of tender activities

· General duties include measurement of quantity, collection quotation, cost comparison, and participating in preparing tender price

· Review of quotations with the specifications

· Study and identify discrepancies in tender/contract documents and raise queries for clarifications

· Proofreading of tender responses to highlight areas for incorporation of quantity and ensure issuance to stakeholders to quote for works

· Negotiate the price with the Subcontractors and Suppliers

· Review of cost impact (Value Engineering proposal/ Variations)

Job Requirements:

• Minimum Diploma in Building / Quantity Surveying or equivalent or relevant academic background
• Min 2 years of working experience in the construction industry.
• Proficient in Microsoft Office (MS Word, MS Excel)
• Highly self-motivated, good working attitude with a high level of professionalism and integrity
• Good team player and adaptable to a dynamic environment
• Good communication & interpersonal skills.

Job Summary:

• Work Time: 8.30am till 6pm
• Work Days: Mon to fri
• Location: Penjuru - West
• Salary: Basic up to $4k
• Benefits: Transport provided, AWS, VB

Job Description:

• Sales Generation: Contribute to the team revenue in all aspects of the sales process, including lead generation, customer inquiries, order processing, and post-sales support.
• Customer Relationship Management: Maintain strong relationships with existing and potential customers by providing prompt and accurate information, addressing queries and concerns, and ensuring customer satisfaction.
• Proposal and Quotation Preparation: create sales proposals and quotations, ensuring accuracy, and timely delivery to customers.
• Market Research: Conduct research on market trends, competitors, and customer needs to identify potential sales opportunities and develop effective sales strategies.
• Trade Shows and Events: Assist in the planning, coordination, and execution of trade shows, industry events, and customer demonstrations to promote products and services.
• Administrative Tasks: Perform various administrative tasks, including maintaining sales records, preparing sales documentation, managing calendars, and coordinating meetings and appointments

Job Requirement:

• min 2 years marine industry OR sales experience.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Eugene Eiap Yeow Hong

Registration Number: R23112438

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Job Overview:

The Piping Material Engineer will be responsible for providing technical expertise in the selection, specification, and procurement of piping materials for FPSO (Floating Production Storage and Offloading) projects in the oil and gas industry. The role includes ensuring compliance with relevant standards, codes, and project requirements, as well as supporting the design, procurement, and installation phases of piping systems.

Key Responsibilities:

• Material Selection:Identify and select appropriate piping materials based on project specifications, industry standards, and client requirements for FPSO systems.
  Ensure compatibility of materials with process fluids, temperatures, and pressures encountered in oil and gas environments.
  
• Technical Specifications:Develop and maintain piping material specifications, including MTOs (Material Take-Offs), datasheets, and valve specifications.
  Ensure all materials comply with relevant industry codes such as ASME, API, ASTM, and company standards.
  
• Vendor Management & Procurement:Assist procurement teams by evaluating and approving material suppliers and vendors.
  Review technical documentation from suppliers, including manufacturing processes and certifications, to ensure materials meet project standards.
  
• Design & Engineering Support:Collaborate with piping designers and stress engineers to ensure materials are fit for purpose and can withstand operational stresses.
  Provide input during detailed engineering to ensure proper material handling, storage, and installation methods.
  
• QA/QC & Inspection:Assist in the inspection and quality control of piping materials, ensuring that they meet the required specifications.
  Ensure non-conformance issues are addressed and resolved in a timely manner.
  
• Health, Safety, and Environment (HSE) Compliance:Ensure all selected materials contribute to the safety and integrity of the FPSO.
  Comply with health, safety, and environmental regulations during material selection and application.
  
• Documentation & Reporting:Prepare and maintain technical reports, material lists, and project documentation.
  Provide regular updates to the Lead Piping Engineer and project management on material status and procurement timelines.
  

Qualifications and Skills:

• Education:Bachelor’s degree in Mechanical Engineering, Materials Engineering, or a related field.
  
• Experience:Minimum 5-7 years of experience as a Piping Material Engineer in the oil and gas industry, with at least 3 years in FPSO projects.
  
• Technical Skills:Extensive knowledge of piping material standards (ASME, ASTM, API, etc.) and industry codes.
  Proficiency in material selection, corrosion prevention, and understanding of fluid properties in offshore environments.
  Familiarity with procurement processes, material requisitions, and supplier/vendor evaluations.
  
• Soft Skills:Strong analytical and problem-solving skills.
  Excellent communication and teamwork abilities.
  Attention to detail and commitment to high-quality standards.
  

Certifications:

• Certifications related to piping engineering and materials, such as NACE, API, or ASME certifications, are preferred.

Work Environment:

• Willingness to work in both office and offshore environments as needed.
• Ability to travel to vendor and project sites when required.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years experiences.
• Prefer candidate with LTA project experience.

Join a dynamic education provider leading the way in Robotics, STEM, Coding, and Artificial Intelligence.

We are looking for a Customer Service Executive to manage daily operations at our Jurong East education centre, with occasional support at our Punggol branch.

This role is ideal for someone who enjoys assisting students and parents in a tech-forward environment.

First Konnection – The Authorized Education Recruitment Specialist for this Role

What You Can Expect:

• Streamlined Process: We handle the logistics while you focus on presenting your best self.
• Clear Communication: Timely updates and guidance throughout the application process.
• Personalized Advice: Leverage our expertise to highlight your strengths and secure the role.

Key Responsibilities:

• Manage walk-in, phone, and email enquiries from students and parents.
• Maintain accurate records and documentation.
• Support the scheduling of classes and handle administrative tasks.
• Assist trainers and ensure coordination between staff and students.
• Occasionally travel to other branches for meetings or to cover staff.
• Work on weekends, as these are our busiest days.

What We’re Looking For:

• Excellent customer service skills and a positive, approachable attitude.
• Strong organizational skills and the ability to multitask.
• Proficiency in English (spoken and written).
• Experience in customer service or admin roles is a plus.
• Familiarity with MS Office (Word, Excel) and Google Drive.
• Willing to work on weekends and travel between centres when needed.

Working Hours:

• 5½ Day Work Week:Weekdays: Monday, Thursday, Friday (1:00 PM – 8:00 PM); Tuesday (1:00 PM – 4:00 PM).
  Weekends: Saturday & Sunday (8:30 AM – 6:00 PM).
  
• 1-Hour break on weekends and 30-minute breaks on weekdays (except Tuesday).

Why Join Us?Be part of a team where your customer service skills are valued and where you can make a real difference in students’ lives.

EA Registration No.: R23111820 (Ben Chang)
EA Licence No.: 22C1307 (First Konnection Pte. Ltd.)

Purpose and Scope

Support in the collection and disposal of waste materials and/or recyclables.

Key Roles and Responsibilities

• Assist in the collection of waste materials / recyclables from municipal and industrial & commerical premises
• To guide the driver during the collection process such as during vehicle reversing
• To assist in the disposal of waste/recyclables to material recovery facility, C&D plant or any other authorized disposal facilities
• To reinstate work area (spillage- refuse and oil, overflowing refuse etc)
• Proper handling of equipments and receptacles
• To ensure vehicles are kept clean and washed daily
• Ensure collection is done in a safe manner in accordance to the company’s SOP
• Comply with work place safety and health requirements (e.g. donning proper PPE, safety boots etc)

Qualification, Skills and Experience

• Physically Fit
• Willing to work outdoor environment
• Location: Tuas Depot - 17 Tuas Avenue 12 S(639037)
• 6 days work week, with one rest day
• Working hours: 7am to 3.20pm

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

1. Analyzing and providing technical support solutions on the project

2. Working closely with Contracts and QS team in analyzing and evaluating sub‐contractors planning and reporting submission.

3. Preparing slide presentations prior to design submissions.

4. Preparing manpower and machinery schedule.

5. Project plan scheduling with relevant software to meet the milestone as specified by the client.

6. Preparing the write‐up / method statement on construction sequence and other requirements as stated in the contract

Requirements:

1. At least 2 years' working experience on large scale constrctuion project with a main contractor in a technical capacity such as engineering, project management, planning, etc.

2. At lease 3 years's working experience in design coordination of multi‐disciplinary infracstrucure project, involving civil and structural, geotechnical, electrical and mechanical, process, etc.

3. Good command of English.