Job Responsibilties:

• Responsible for projects management, planning and the design of Mechanical & Electrical building systems
• Meeting clients, permitting authorities & services providers on scope of service and conduct field surveys
• Handling project evaluation, budgets, documentation, technical specification and coordination
• Analyze, building computer models & selection of systems and evaluate project budgets
• Complete design documents & technical specifications
• Work Coordination with other teams as well as mentor junior staff
• Ensure the smooth completion of the project

Job Requirements:

• Degree in Mechanical Engineering accredited by Professional Engineer Board, Singapore.
• Minimum 5 years of experience in engineering design work for building services
• Singaporean only

If you have the drive and capabilities to take our challenge, please send full details of your experience, qualifications, current and expected salaries via Sembcorp Career Page: https://hrsembcorp.darwinbox.com/jobs/jobsdetailed/id/a64049e32e3679/grp_company/a632dab40df257.

Only shortlisted candidates will be notified. Thank you for applying.

Responsibilities:

• Prepare Engineering Document (Technical Specification, Calculation, drawings, etc) in the development of new designs and products.
• Generate new drawings and drawing changes including parts lists and Change Orders.
• Perform impact analysis on the arrangement and drawings.
• Plan and organise relevant design changes in cooperation with Ship Design Authority.
• Study/analyse/investigate/develop the design. Prepare technical documentation/guidelines for the work to be performed, according to established formats from the technical database, stipulated budget, time schedule and quality standards.
• Conduct Testing and validate technical interfaces for the work performed, according to established test procedures from the technical database.
• Liaise with ship-owners and Ship Design Authority to obtain approval on engineering deliverables.
• Manage the design schedule and ensure that design is carried out according to contract and regulations.

Requirements:

• At least a Bachelor’s Degree in Electrical Engineering.
• At least 1-2 years experience in engineering design and/or Classifications Societies and/or Naval Engineering Officer.
• Strong knowledge of international design codes, Classification/Statutory Rules and Regulations.
• Keep abreast with Naval Classifications Rules, Military and Industrial Standards relevant to design activities.
• Engineering Design Project Management skills.
• Strong Leadership and Interpersonal skills.
• Software knowledge of AutoCAD
• Only Singapore Citizens will be considered for this position

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Responsibilities:

• Select, lead, direct, evaluate and develop a team of professional
• C & S engineers to ensure that, C & S engineering are completed on time within budget and as per the set goals
• Create career development programmes for the team and develop medium-term planning for the growth of the engineering dept.
• Ensure implementation of projects for expanding and /or modifying the production lines
• Lead, guide, evaluate and develop a team of engineer with design engineering responsibilities to ensure that the organisation achieves it business objectives and complies with all relevant regulations and laws
• To comply with the organisation safety and regulation.
• Oversee and ensure feasibility study, conceptual, basic and detailed engineering design that are carried out by the Civil & Structural discipline are in accordance with project requirements.

Pre-Requisites:

• Master or Degree in Civil or Structural Engineering.
• 10+ years relevant working experience on drafting in the plants and systems for projects in the Oil & Gas, Petrochemical, Chemical or Pharmaceutical Industries
• Well-versed in all local and international codes and standards on the related field
• Engineering and Design calculations
• Computer literate and good hand-on experience on applications such as CAD drafting, Microsoft Office, Civil & Structural design software like STADD Pro / TEKLA Structures, etc.
• Positive attitudes/ Drive for result
• Good interpersonal, management and decision making skills
• Strong Business acumen
• Flair in business writings

Job Description:

We are seeking a highly skilled and experienced Design Engineer to join our Design team. The successful candidate will be responsible for designing and developing custom mechanical systems and components for Asphalt and Concrete plants, as well as overseeing their fabrication and testing.

Responsibilities:

• Design and develop custom mechanical systems and components using CAD software (e.g. SolidWorks, Inventor, Creo)
• Collaborate with cross-functional teams including Electrical and Software Engineers, Project managers, and Fabrication Technicians to ensure successful project outcomes.
• Oversee the fabrication and testing of mechanical systems and components
• Develop and maintain project timelines and budgets.
• Perform research and analysis on materials, components, and systems to ensure optimal performance and cost-effectiveness.
• Participate in project meetings and provide technical expertise and guidance as needed.
• Ensure compliance with all relevant safety regulations and standards.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field
• Minimum of 5 years' experience in mechanical design and fabrication
• Proficiency in CAD software (SolidWorks preferred)
• Strong knowledge of mechanical design principles and practices
• Experience with the design and fabrication of complex mechanical systems and components
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal skills, ability to converse and write in English.
• Ability to work independently as well as part of a team.

Job Responsibilities

• Design and development of photoelectric sensors

• Using optical design software to design optical systems that include lens, aperture, filters with defined light source meeting sensor specification considering the mechanical and electrical tolerance

• Create detail optical test plan and perform verification and implement countermeasures

• Collaborate with Electronic Engineer to define the light source and Mechanical Engineer on the mechanical parts design

• Collaborate with cross functional teams on new and custom products development, and sustain product lifecycle including customer complaints, components obsolescence, failure analysis, etc.

• Liaising with Headquarter for technical support and technology transfer

Job Requirements

· Master/Degree in Electronic/Optoelectronic Engineering or equivalent

· Minimum 3 years of relevant experience in optical design and development

· Experience on optical system design in optical design software; i.e. ZEMAX / Optical studio

· Good knowledge in photonic design for optical sensor is an advantage

· Strong interpersonal and analytical skills

· Ability to work both independently and in a team environment

· Creative, self-driven and willing to acquire new skills and grow in the position

THE ROLE:

We are looking for highly qualified and driven individuals to join the FPGA Product Development (FPD) Silicon Integration team. You will work on full-chip and chiplet RTL development and integration for next generation FPGA and programmable SoC products. You will also work with team members across globally diverse regions. The role is based in Sinagpore.

THE PERSON:

You have a passion for modern, complex processor architecture, digital design, and verification in general. You are a team player who has excellent communication skills and enjoy collaborating with other like-minded engineers located at different sites. You have strong analytical and problem-solving skills and are willing to learn and ready to take on challenging problems.

KEY RESPONSIBILITIES:

• Integrate RTL and IP components from different design teams
• Build full-chip RTL connectivity models
• Verify full-chip RTL and models match architectural intent
• Develop custom tools and methodologies to improve development efficiency and quality

PREFERRED EXPERIENCE:

• New college graduate or 1-3 years industry experience and background in RTL (SystemVerilog) digital design
• Understanding of complex FPGA and SoC architectures
• Familiarity with digital design ASIC design flow
• Experience with RTL coding in Verilog/SystemVerilog HDL
• Experience with CAD tools such as VCS, Verdi, Design Compiler, SpyGlass, Lint, LEC, Conformal, CDC/RDC, etc. a plus
• Experience in timing constraints for synthesis and STA at SoC level with Primetime or equivalent tool a plus
• Familiarity with working in Unix/Linux environment and Version Control Software such as Subversion or Perforce
• Proficient in scripting languages such as Perl or Python a plus

ACADEMIC CREDENTIALS:

• Bachelors or Masters degree in Computer Engineering, Electrical Engineering, or equivalent

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Job Description

Report to and is accountable to an Engineering Manager, Engineering Section Leader, or a higher titled engineer (as defined by the manager) and is responsible for performing engineering activities as defined in procedures and work instructions.

Job Duties

· Shall include performing hand or computer assisted calculations, creation of DVR packages for safety critical equipment, review and approval of engineering drawings, processing engineering design changes, interfacing with other Dril-Quip departments, participating in Engineering Design Reviews and dispositioning NCR’s.

· Additionally, this position is responsible for creating new product designs and/or improving existing product designs.

· Interacts with customers/suppliers/vendors and assists with development of technical specifications.

· Attends project meetings and presents specific aspects of engineering assignments.

· Has fundamental understanding of various industry standards (both regional and global) in addition to recommended practices.

· Can direct and mentor younger, less experienced engineering personnel.

Minimum Requirements

· Bachelor of Science degree in an engineering discipline from an accredited college or university

· Typically, a minimum of three (3) years’ experience in the design and application of engineered offshore drilling and production equipment, preferably in an oilfield equipment manufacturing environment.

Preferred Requirements

· Knowledge of connectors, diverters and mudlines will be of added advantage.

Job Responsibilities:

• Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
• Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
• Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
• Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
• Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
• Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
• On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
• Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma /Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English
• Minimum 3 to 5 years of working experience in industrial /equipment production or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate that are able to start work within short notice or immediately would be advantageous.

Kindly indicate your expected salary in your resume.

We have several available postdoctoral positions at the Singapore University of Technology and Design (SUTD) to work in the area of Robotics. This position focus on supporting the design of algorithm for various robotics applications.

Qualification:
- Relevant PhD Degree in Electrical Engineering, , Mechanical Engineering, Robotics, or related areas
- Strong hands on experience Preference will be given to those with prior robotics project experience such as:
1) SLAM;
2) ROS;
3) Sensor fusion;
4) Machine Learning;
5) Mobile platforms (eg: wheeled robots, legged robots); and
6) Manipulators

Applications, assembled as a single PDF file, should contain a complete resume, full list of publications, as well as the names and contact information of up to three references. Interested applicants may send his/her CV to Assoc/Prof U-Xuan Tan via email ( [email protected] ). Review of applications will continue until the position is filled. Only shortlisted candidates will be notified.

Job Description

• Strong grasp of basic accounting principles and experience in accurately recording financial transactions.
• Processing and verifying invoices, managing vendor relationships, and resolving invoicing discrepancies promptly.
• Manage customer invoices, monitor payments, and maintain up-to-date records of accounts receivable.
• Bank reconciliation, ensuring they can identify and resolve discrepancies between the company's financial records and bank statements.
• Preparation of financial reports and analyzing financial statements for insights into the company's financial performance.
• Budget preparation, monitoring, and variance analysis, demonstrating an understanding of budgeting processes.
• Preparing for audits to ensure regulatory compliance.
• Collaborating with the payroll department to ensure accurate and timely payroll processing.
• Proficiency in accounting software and tools . The ability to adapt to new technologies and stay updated on industry best practices is a plus.

Job Requirements

• Permanent residence(PR) and Singaporean only.
• Bachelor's degree in Accountantcy or equivalents.
• Previous experience in accounting roles is preferred.
• Strong understanding of accounting principles and financial regulations.
• Attention to detail and strong organizational skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.

Job Description

- Attend project meetings, conduct site surveys, and follow up on project progress.

- Communicate effectively with designers and clients for design details.

- Ensure accuracy of design files before fabrication.

- Handle procurement for raw materials.

- Work closely with Production and Installation team for timely delivery.

- Demonstrate creative thinking for problem-solving.

- Must know how to use Adobe Illustrator for vector files, operate 3-Axis CNC router, laser cutter, and CNC bending machine.

- Update CNC job progress in the job tracker.

- Required to work on weekends/public holidays/night works subjected to the requirement of the projects.

- Ad-hoc tasks as assigned.

Requirement

- Possess a diploma in any discipline.

- Proficient in written and spoken English.

- Experienced in CNC operation and fabrication.

- Strong organizational and communication skills.

- Thrives in a fast-paced environment.

- Attention to details and quality

We have several available research assistant positions at the Singapore University of Technology and Design (SUTD) to work in the area of Robotics. This position focus on supporting the design of algorithm for various robotics applications.

Qualification:
- Relevant Degree in Electrical Engineering, , Mechanical Engineering, Robotics, or related areas
- Strong hands on experience Preference will be given to those with prior robotics project experience such as:
1) SLAM;
2) ROS;
3) Sensor fusion;
4) Mobile platforms (eg: wheeled robots, legged robots); and
5) Manipulators

Applications, assembled as a single PDF file, should contain a complete resume, full list of publications, as well as the names and contact information of up to three references. Interested applicants may send his/her CV to Asst Prof U-Xuan Tan via email ( [email protected] ). Review of applications will continue until the position is filled. Only shortlisted candidates will be notified.

The School of Electrical and Electronic Engineering (EEE) invites applications for the position of Research Fellow.

The RF will work on the assigned project to conduct the research on development of resistive circuit design. The candidate must have good experience in the areas listed below, possesses excellent skills.

Key Responsibilities:

• Development of resistive circuits design
• Test chip design and layout
• Good testing skills

Job Requirements:

• PhD degree in Electrical and Electronic Engineering or related field
• Expertise in integrated circuits design
• Test chip design and testing experience are advantages
• Proficiency in English

We regret that only shortlisted candidates will be notified.

Established in 1981, the School of Electrical and Electronic Engineering (EEE) is one of the three founding Schools of the Nanyang Technological University, Singapore. Built on a culture of excellence, the School is renowned for its high academic standards and extensive research activities. To support advanced research, the School hosts 13 research centres which are well equipped with sophisticated and state-of-the-art equipment. Besides the 13 centres, there are more than 60 laboratories, supporting both the teaching and research activities in the School.

NTU EEE is now one of the top-ranked schools in the world, ranked 2nd globally by subject in the U.S. News and World Report Best Global Universities Rankings 2023 and 9th worldwide in the QS University Rankings by Subject 2023 (Electrical and Electronic Engineering).

Join the School of Electrical and Electronic Engineering, College of Engineering, Nanyang Technological University, Singapore as a faculty member and embark on a challenging and exciting career in teaching and research excellence, so as to prepare engineering leaders of the future.

The School invites applications for one non-tenure-track Senior Lecturer/Lecturer position in Integrated Circuit Design.

Position Description
Applicants should have PhD degree in electrical and Electronic Engineering, or a closely related discipline. Candidates who have a Master degree and extensive industry or vocational experience may also be considered. A strong background and teaching experience in one or more of the following areas: RF Integrated Circuits and Systems, Mixed-Signal Integrated Circuits and Systems, Circuits and Systems for Artificial Intelligence, Power Management Circuits and Systems, Ultra-low Power Circuits and System, Digital Circuits and Systems, Hardware Description Language, would be an advantage.

Fresh PhD graduates would be considered but preferences are given to candidates with relevant working/teaching experience in Universities.

Responsibilities
The successful candidates are expected to teach courses in the fields of Integrated Circuit Design at the undergraduate and postgraduate levels and supervise undergraduate and postgraduate students.

Application
Applicants are invited to submit their applications (cover letter, CV, research and teaching statements, and citation report, where applicable) through the NTU career portal.

Review of applications and shortlisting of applicants will be carried out on an on-going basis until the positions are filled. Only shortlisted candidates will be notified.

Job responsibilities:

· Assist with day-day operations in Administrative and HR department.

· Responsible for monthly processing and submission of payroll and reports.

· Preparing necessary HR documents for hiring, disciplinary handling, exiting, promotion, etc.

· Ensure timely verification of timesheets and submission of payroll, CPF, Tax clearance, etc.

· Administration of NS, maternity, childcare, paternity and insurance claims, etc.

· Handle clearance for resignation/termination/dismissal.

· Maintain accurate HR database and up-to-date employees records.

· Ad-hoc duties as and when assigned.

Requirements:

· Diploma / Degree

· Hands-on experience with Infotec HRMS

· Excellent communications and interpersonal skills with strong ability to engage and influence stakeholders at

various levels, in both spoken and written English and Chinese

· Demonstrates flexibility and adaptability according to changing needs and priorities

· Resourceful and possess strong initiative to drive changes

· Ability to work independently as well as be active team members within and across the HR team.

· At least 5 years of HR working experience

Other information:

• 5-days work week
• Working location: Jurong area

Job Summary: We are seeking a highly motivated and skilled Senior Research Assistant / Research Associate to join our team and contribute to our ongoing projects in the field of 3D reconstruction. The successful candidate will work closely with our research team to develop novel algorithms and techniques for 3D reconstruction from various data sources. This is an exciting opportunity to be involved in cutting-edge research and make a significant impact in the field.

Responsibilities:

• Conduct research in the area of 3D reconstruction, focusing on developing innovative algorithms and methodologies.
• Design and implement experiments to validate the proposed approaches.
• Analyze and interpret data obtained from different sources, including images, point clouds, and sensor data.
• Stay up-to-date with the latest advancements in 3D reconstruction and related fields, and integrate new findings into research projects.
• Prepare research papers and reports for publication in reputable conferences and journals.
• Present research findings at conferences and other relevant events.

Qualifications:

• A master degree in Computer Science, Electrical Engineering, or a related field, with a focus on computer vision, image processing, or 3D reconstruction.
• Strong background in 3D geometry, computer vision, and machine learning.
• Proficiency in programming languages such as Python, C++, or MATLAB.
• Experience with relevant software libraries and frameworks, such as OpenCV, PCL, or Pytorch.
• Solid understanding of mathematical concepts related to 3D reconstruction, including geometry, optimization, and statistical methods.
• Track record of publishing research papers in reputable conferences or journals.
• Excellent problem-solving and analytical skills.
• Strong communication skills and the ability to work effectively in a collaborative research environment.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Job Description

The Facade Design Manager oversees all fundamental parts of the design process. The Facade Design Manager ensures drawings and proposals comply with the client's requirements, as well as with statutory and other requirements.

Duties and responsibilities

1. Fuction as in house technical resource for project issues regarding architectural and engineering design
2. Ensure that design drawings meet client requirements (shop drawings, cutting lists, production drawings, job order etc)
3. Liaise and coordinate with members from Projects, Contracts, and Production to ensure that projects proceed according to schedule and within budget
4. Liaise and coordinate with external agencies - architescts, QPs, PE, contractors, sub contractors, suppliers etc from inception to completion of project
5. Manage design activities to ensure the drawings are completed and approved in time for fabrication
6. Prepare materials takeoff and optimization
7. Work with Procurement Department for materials procurement
8. Check and ensure the quality of all drawings and designs
9. Participate in the development of proposals, pricing and presentations for design work
10. Manage and implement design schedule and forecasts
11. Assign design resources based on project type, complexity and timelines
12. Ensure proper record keeping and version control for all drawings, cutting lists etc in accordance with ISO procedures.
13. Manage, supervise and train members of the department
14. Source for and manage external drafters as necessary.

Freelance Contract Role

Hourly payment

About the role

We are looking for an experienced Content Designer to design experiences through language for various services across our superapp. You’re someone who has exceptional UX writing abilities and a user-centric approach. You’ve got excellent time management and prioritization skills, so delivering great quality work on time is never an issue. Strong collaboration and stakeholder management abilities are a given for you.

Responsibilities

● Take responsibility for and manage the day-to-day delivery of projects you’re assigned to

● Ensure that your work is error-free, adheres to our content style guide, and meets required timelines

● Collaborate with a working team of product designers, product managers, researchers, product marketing managers and other functions to deliver against objectives

● Coordinate with content operations and localisation specialists to prepare work for development

Requirements

● Native English speaker, or at least outstanding proficiency in English

● 5+ years of relevant experience working with cross-functional stakeholders in an agile fashion

● Able to make effective content decisions which aligns with both user needs and business objectives

● Able to support and communicate your decisions with solid, compelling rationales

● Able to communicate well and collaborate remotely if needed

● Comfortable working with design tools such as Figma

● Experience working in e-commerce, financial services, or tech startup environments

● Background in communications, design, social sciences, humanities, or any writing-related field

The Singapore University of Tecnology is looking for a Research Assistant in the area of networked systems and cybersecurity. The successful applicant will work closely with a team of researchers and engineers to design and develop novel solutions for various types of networked systems (including industrial control systems and 5G systems).

Qualification & Experience:

• Bachelor's / Master's in Computer Science, Computer Engineering, or related discipline.
• Expertise in computer networks and cybersecurity.
• Research experience, technical skillset, and strong publication records in the area of networked systems, cybersecurity, or related areas.
• Strong software skills
• Ability to work well in a collaborating team setting
• Good written/oral communication skills in English

Reporting to the Design Manager, the incumbent will be responsible for preparing technical 2D/3D drawings/layouts based on specifications of clients.

A Day in the Life

• Prepare detail drawings and formulate project design packages using CAD and 3D software
• Collaborate with Designers on specific requirements for technical drawings
• Prepare specifications, verify accuracy and completeness of drawings
• Anticipate problems in manufacturing, assembly, installation and operations
• Review progress on site and ultimately be responsible for design quality and experience
• Conduct design presentations to prospective buyers to convey design intent
• Perform any other adhoc duties

We are looking for

• Diploma in Interior Design, Product Design or Architecture
• 1-2 years of related working experience
• Excellent knowledge of design tools such as AutoCad, Sketchup, 3D Studio Max, Illustrator, VRay and Photoshop
• Experience in retail store environments and design of retail fixtures is a plus
• Have a strong design sensibility and the technical ability to develop a project from concept to execution
• Knowledge and familiarity with metal, wood, glass and plastic fabrication is preferred
• Possess excellent design flair with an eye for details and self-motivated
• Excellent verbal and written communication skills
• Able to work under pressure of meeting timelines

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

JOB DESCRIPTION

· Work with SoC Integration and SoC Timing on power structure optimization

· Work on UPF development to support different stages of implementation flow and SoC verification

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct power structure check at different implementation stages.

· Support back-end implementation on power structure and optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in UPF development and power check.

· Good understanding of Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Senior/ Mechanical Design Engineer

• Basic $3500-$5000 + AWS + VB
• Mon - Fri @ 8.30am-5.30pm
• Location: Ang Mo Kio

Responsibilities

1. Design standardization.
2. Costing and project management.
3. Conceptualize and design machines and modules.
4. Implement design for manufacturing (DFM), design for assembly (DFA), and Concurrent engineering principles.
5. Design pneumatic/hydraulic circuits.
6. Create detailed fabrication drawings, assembly drawings, and layout drawings.
7. Select and size standard components available off the shelf.
8. Undertake new product development or participate in sustaining engineering/Continuous Improvement Programs (CIPs).

Requirements

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:
• Ultra High Precision machine design
• High Speed Pick and Place mechanism design
• Structural, kinematics and dynamic analysis and FEA simulation
• Geometrical tolerance and dimensional analysis (e.g. stack up error)
• Engineering material selection
• Design troubleshooting
• Application of analysis tools like FMEA, DOE3-4

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Kam Shwu Min | EA Personnel No.: R22111811