Job Purpose

Perform automation engineering work and lead design teams in both local and international projects with varying degrees of complexity and total installed cost and deliver the project scope to the agreed quality, cost and schedule.

Responsibilities and Authority

• Perform design tasks according to the agreed quality, scope, time and safety in our investment projects.
• across all project phases from idea creation, pre-study and feasibility study via basic engineering to detailed engineering and As Built phase. In addition, participate in pre-commissioning, commissioning and start-up phases.
• Develop, implement and apply NES defined design engineering work methods and tools systematically.
• Solve problems proactively together with site operations and other refinery disciplines / site SPAs.
• Manage own performance, and the performance of the work share partners, provide necessary inputs and guidance as a design specialist of own instrumentation engineering.
• Develop oneself in automation technical competence and leading design work and workshare partners, or towards becoming a design specialist of own engineering discipline. Develop oneself in functional safety and instrumentation engineering.
• Collaborate and network with other design disciplines, workshare partners, suppliers and customers.
• Develop your own network of professionals outside the company and proactively use such networks to further the interests of the company.
• Take part in developing our instructions and way of working.

Primary responsibilities for this role at investment project level are (but not limited to) the following

• Lead the design team for automation through all phases of the project when appointed as the project lead especially for complex and high TIC projects, or projects of strategic importance to the business.
• Perform automation engineering independently according to relevant local and international codes in an international environment and prepare or check or approve automation deliverables such as control
• philosophy, control and interlock description, cause and effect diagram, control diagram, logic diagram, sequence diagram, alarm management, automation vendor related deliverables, job definitions etc.
• Participate and contribute in reviews such as BoD review, P&ID reviews, HAZID / HAZOP sessions, constructability reviews, risk workshops, value engineering workshops
• Participate and contribute to project sessions such as schedule reviews, PEP reviews etc.
• Lead the design team for automation through all phases of the project when appointed as the project lead
• Conduct site surveys as necessary to gather the relevant information for brownfield project scope. Plan and facilitate necessary studies and carry out investigations needed in a project
• Provide technical support to other engineering disciplines such as engineering & vendor document reviews
• Plan and manage the resource allocation for the projects for which you are the lead together with the resource managers
• Manage the performance of own team members including those of external partners if assigned to the project. Plan the workload and resource allocations for all team members through all project phases
• Prepare manhour estimates and support project planning as required
• Work with the PM / EM in developing the project baseline (cost, schedule and execution plan) provide comments to the baseline documents as required
• Establish proper controls and monitor progress to ensure project execution is in line with the baseline
• Ensure that project deliverables for each phase are prepared in a timely manner
• Prepare purchase requisitions, perform technical evaluations and participate in contract negotiations with suppliers and contractors
• Perform technical expediting related to our deliveries
• Provide engineering support in resolving site queries and site issues
• Participate as automation construction supervisor for automation works at site during turnarounds and shutdowns. Conduct field supervision to supervise the works being carried out by the construction
• contractors through Quality Checks (QC). Perform SAT on automation systems per project scope
• Participate in mechanical completion walk downs and Pre-startup safety reviews, Post startup reviews, lessons learnt sessions, project closeout

Knowledge, Skills and Experience

• Bachelor's or Master's engineering degree in instrumentation, or similar
• Proven experience of at least 15 years on a similar job, with 5 years in a lead role, preferably also inside the fence of industrial clients
• Strong focus on project delivery skills, developing new ways of working and driving change are close to your heart
• Ability to recognize opportunities and respond to client needs, network easily with a variety of stakeholders
• Strong leadership skills, hands-on mentality and desire to further develop in your role and grow with the team.
• Knowledge and experience of ExSilentia software.

1. HDB, LUP and Design and Build projects

2. Overseeing the shop drawings production, which are predominantly en-tasked to the senior engineers.

3. Provide technical support in view to resolve site complications arising from shop drawing or production errors.

4. Manage the design Team.

5. Endorse on the shop drawings for submission.

6. To act as a ‘mentor’ and provide guidance to the young engineers in all respects.

7. Maintain good rapport with existing clients and industry players.

8. Liaise with Main Contractor on all drawing issue by attending weekly meetings, as well as attending meetings with Consultants on design issues, come up proposals or counter-proposal for precast design.

9. Discrepancies feedback by drafters need to be highlighted through email, phone or meeting, keep track of all the discrepancy feedback reply and remind main con of any unsolved discrepancy feedback.

10. Responsible for all precast drawing issue (check drawings, look through arch and cs drawing to ensure that all discrepancies are being highlighted to main con)

11. Drawing schedule/ program planning for drafter,

12. Ask for master program, M&E details, lift contractor drawings, window frame approval shop drawings, lifting anchor, tie back details, mesh barricade location and details, propping details, insert details, gondola hook details from main con. Keep track of all the updates and revised copies

Singaporean/Singapore PR only

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Job Summary

We live in a mobile and device driven world where knowledge of the physical world around us is needed. We rely on this knowledge to get around, to learn about our environment and to enable spectacular new features for custom applications. Apple is meeting those needs as robustly and as creatively as possible and is interested in people who want to help meet that commitment. The success we are striving will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problems in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk. These elements come together to make Apple an amazing environment for motivated people to do the greatest work of their lives. You will become part of a team that sets the standard in cultivating excellence, creativity and innovation. Excellent opportunity to join our Mechanical Design team. The successful candidates will be involved in new module technologies research and development. They will engage in design review, Design For Manufacturing (DFM) reviews and have opportunity to demonstrate innovation, design and management of process tooling fabrication.

Key Qualifications

• Minimum 10 years experience in mechanical design of products, module, jigs and fixtures
• Hands on skill on 3D and 2D CAD design software, like NX, Solidworks or ProE/Creo
• Solid understanding of mechanical engineering fundamentals: properties of materials, solid mechanics, beam statics, Newtonian physics, and thermodynamics
• Familiar with Design for Manufacturability (DFM), and Design for Assembly (DFA), stack up tolerance analysis techniques, functional dimensioning, and geometric tolerancing
• Understanding of design interaction with application condition, in process or reliability (temperature, force applied, cleanroom, humidity etc.)
• Passionate about development, and end product and application of camera and optical modules.
• Experience with testing, reliability and qualification of product
• Self motivated, team player, good written and verbal communication skill

Good to have any one or two of the following experience:

• Experience on Ansys and similar simulation tools
• Experience of fabrication methods of tooling, jigs and fixtures. (Metal and plastic material part fabrication)
• Experience in designing tooling, jigs and fixtures for K&S, Datacon, ASM or similar semiconductor packaging equipment platforms.

Description

• Designing of tooling and Jig & Fixtures to support in-house prototyping builds
• Perform DFM, mechanical simulation and stack up/tolerance analysis and presentation to cross functional team
• Study and understand the project process flow and propose innovative tooling, jigs & fixtures
• Research and recommend suitable manufacturing techniques and materials for tooling and jigs and fixtures
• Generate detail-oriented 2D drawings with all the fabrication process, material and finishing standards with detailed GD&T techniques
• Will be working closely with tooling vendor to fabricate new tooling, trouble shoot, repair and rework the any existing tooling
• Manage the tooling vendor and tooling delivery date to meet the project dates

Education

Bachelor/Master of Science in Mechanical engineering or equivalent

• Reports to Design Manager
• Develop CAD drawings and coordinating of design drawings with the Client / Consultants to comply with requirement of the authorities
• Reviewing project specification, technical clarification and construction drawings
• Assisting for liaison with the Client / Consultants to obtain clearance for the construction works
• Shop drawings submission to client/consultant for approval
• Overseeing and assisting the design review process to include maintaining accurate and timely design review databases
• Assisting progress report for Architectural works
• Assisting design manager with the Architect, Structural design team and M&E design team to resolve discrepancies issue and technical issues
• Other duties as assigned

Job Requirements:

• Diploma or Degree in Architectural / Structural Engineering
• Minimum 5 years of similar experience in building projects for main contractor firms
• Proficient in MS Office, CAD, BIM, Revit
• Good organizational, interpersonal and communication skills
• Technical skills and the ability to use design software
• Location: Central (Beach Road)
• Project: Commercial Building

What you need to do:-

Capture the best images of our customers, operate a cash register, and capture guest’s interest in buying the

Company’s products.A guest associate should be dependable, flexible and switch from one role to another.A guest associate’s role can range from a roving photographer, green screen photographer, green screen editor,

VOS / cash register personnel, flaggers, and spec board sellers.They can be assigned indoors, outdoors, or in the

water.

Key Responsibilities and Accountabilities

• Initiate guest interaction and offer the Company’s service.
• Know and understand camera settings and exposures to capture the guest experiences.
• Compute and record totals of transactions
• Process payment by cash, check, credit cards, vouchers, or automatic debits, if applicable
• Calculate total payments received during a time period and reconcile this with total sales.
• Compile and maintain non-monetary reports and records.
• Communicate with guests putting them at ease, encouraging them, and directing them.
• Manages the processing of images, discussing technical problems, checking for quality, and dealing with clients’ concerns.
• Compiles finished products for sale, including albums and framed prints.
• Achieve overall sales targets given.
• Achieve individual KPI targets.
• Ensure the site is ready to start daily operations, stocked and cleaned to a high standard.
• Responsible for handling equipment on site
• Performs other related duties as required.
• Flexible to work on weekends and public holidays.
• Always adheres to Company image and grooming standards whilst on duty.
• Performs any other reasonable tasks as may be requested from time to time.

Desirable Skills and Qualifications:

• No experience needed
• Must be able to work on weekends and public holidays
• Comfortable standing for the duration of your shift
• Comfortable entering water (Swimwear will be provided, the top is fully covered and shorts for bottom)
• Great team player
• A self-motivated fast learner
• Flexible and adaptable
• Has a pleasing personality, and a positive outlook.
• Previous experience in a customer-facing role.
• An extrovert who does not mind striking up conversations with complete strangers.

Come Join Us Now !!!

Walk-in-Interview : 4012 Ang Mo Kio Avenue 10, #07-04, Techplace 1, 569628

Interested candidates please Whatsapp to 87220721 / 81004563

Job Description

• Assist the Executive Producer in planning, coordinating during the pre-production, production and post-production.
• Plan and organize the work schedule efficiently. Able to react swiftly to unforeseen schedule changes.
• Arrange meetings with relevant departments (internal and external) and gather information for budget planning.
• Prepare and manage tender processes to facilitate smooth production of project.
• Make reservations for facilities and resources (editing, filming crew, transport, extras, Audio Post, studios etc) needed for production.
• Assist Producer and Assistant Producer for location filming by coordinating facilities, talents booking, location permits and keeping tracks of production schedules and budget.
• Liaise with sponsors, service providers and vendors for products and/or services required in production.
• Arrange meeting with Airtime Sales / Network Programming to discuss on potential client that are interested to sponsor the programme with incidental exposures.
• Assist Assistant Producer on their line-ups, rundowns, location requisition and ensure they submit it on time for filming.
• Arrange post mortem meeting and submit report after meeting.
• To prepare and execute administrative and budget processes promptly.

Qualifications

• At least Diploma or Certificate in TV Communication, TV Production or Project Management.
• Minimum 2 years of production experience.
• Keen interest in TV Productions. Good knowledge of sports will be advantageous.
• Familiar with internal sports productions and processes will be advantageous.
• Good knowledge of studio production, field and production management.
• Possess good organisational skills.
• Possess good interpersonal and communication skills
• Able to work under stress.
• A good team player and adaptable to changes.

Responsibilities:

• Responsible for 3D product design and its requirements
• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions
• Create proof of concepts
• Generate engineering drawing with proper GD&T and Tolerance Stack up
• Define test requirements needed for all the designed products
• Perform Patent search for possible design infringement
• Drive Projects with tight timeline

Requirements:

• Degree in Engineering (Mechanical / Industrial)
• 1-4 years of relevant experience
• Good exposure in Plastic Injection molded parts design
• Knowledge of product design, engineering plastics behavior, product certification
• Knowledge of CAE simulation will be an added advantage
• Competent in Engineering calculations
• Hands on 3D CAD & CAE experience
• Good problem solving skills with strong technical acumen

Interested candidates may send their CV to Caris (Reg No. R1109826) at [email protected] quoting the job title in the Subject line. We regret that only shortlisted candidates will be notified.

3D Graphic Designer | AutoCAD, SketchUp, 3ds Max | Graphic Design | Interior Design | Tai Seng

5 days, 10am- 6pm

Salary: $3000 -$4000, with VB

Location: Pixel Red, Tai Seng Avenue

Company industry:

A dynamic and innovative experiential events management company specialising in creating immersive and captivating experiences for a diverse range of clients.

Job scope:

• Collaborate closely with Project Managers, clients and other stakeholders to ensure seamless execution of design projects.
• Understand clients requirements, present design concepts to obtain buy-in, accommodate feedback and make revisions as necessary to meet clients expectations
• Manage multiple design projects simultaneously, adhering to project timelines and budget
• Design and produce graphics, signages, and marketing collaterals for events and exhibitions complying to Client’s branding guides
• Produce photorealistic 3D visualisations to present design concepts that are client winning
• Create detailed 3D models of event spaces, interior designs, and exhibition booths using software such as AutoCAD, SketchUp, or similar tools.

Requirements:

• Bachelor's Degree or Professional certification in Graphic Design, Interior Design, Architecture, or a related field.
• Proven experience in 3D modelling and rendering for events, interior design, or exhibitions (portfolio required).
• Proficiency in 3D software such as AutoCAD, SketchUp, 3ds Max, or similar.
• Strong graphic design skills with proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign).

For complete list of jobs opportunities please visit

Supreme Full Jobs List

Part Time / Contract Staffing Telegram Group

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Working Day: Mon to Fri

Working Hours: 9am - 6pm

Location: Eu Tong Sen Street (Clarke Quay)

Salary: $2000 - $2600

Responsibilities:

• Support local marketing team by facilitating execution of marketing activities.
• Examples of activities include social media content, school open day, art competitions, event boothing, etc.
• Assist in scheduling meetings for local marketing and industry relations teams.
• Follow up via email with studios, vendors, and prospective students
• Respond to questions from prospective students
• Check and monitor status of prospective students’ enquiries and applications.
• Submit materials for graduates’ career support initiatives.
• Ensure information on websites are up to date.
• Websites management
• Collate and submit selected students’ materials to film festivals, student awards etc.

Job Requirements:

• Prior coordinating experience preferred. No prior experience but willing to learn may apply. Entry level is welcomed.
• Interest in marketing, and proficiency in Adobe Photoshop and Adobe Premiere Pro will be a plus.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Responsibilities:

✅Lead a team to achieve targets for tenders and projects

✅Guide consultant and review their design to ensure the design adequacy to meet requirements

✅Present design results to the client and stakeholders

✅Optimize the design to reduce cost and construction schedule effectively.

✅Complete all design works including approvals and ensure delivered within construction schedule.

✅Coordinate with construction team to ensure constructability of designed scheme.

✅Train capabilities of design engineers.

✅Collect information on future projects & participate in improve site productivity.

Requirements:

• Degree in Civil engineering
• Min 15 years experience in marine and/or coastal projects
• Experience in Project and Design Management.
• Passion in productivity enhancement (such as ICT, digital technology)
• Good writing and presentation skills as well as planning and documentation.

Interested applicants, please send in your updated resume by clicking “Apply Now”

Lin Weikang

Registration Number: R21102570

Workstone Pte Ltd

EA License Number: 19C9998

Responsibilities:

• Monitor Soil Investigation to get correct geotechnical design inputs for design.
• Foundation recommendation report preparation including backup calculation (In all types of soils & rock)
• Pile capacity calculations in various soils/rocks. Test pile location plan/ Pile reinforcement calculations & drawing preparation. Validation of pile capacity by Pile load test (Vertical / Lateral / Pull out).
• Piled Raft design using the latest design tools and theories.
• Design using PLAXIS 2D Software (Sheet pile with structure waler /Diaphragm wall-structure/contiguous pile with soil/rock anchor)
• Design of all components like Anchor capacity, water & structure design, modeling top-down method of construction.
• Dewatering system design. (Wellpoint, Drawdown calculations, Open dewatering).
• Seepage control techniques like Jet -Grouting, slurry wall & flow net calculations.
• Soil improvement using stone column
• Design of stone columns, settlement calculations & Liquefaction calculations.
• Swelling soil management techniques.
• Back Fill material specifications & various compaction techniques used for different backfill materials.
• Slope stability calculations and analysis

Requirements:

• Bachelor’s Degree/Diploma in Civil Engineering
• Min 5 years of relevant design experience in Geotechnical design
• Hands-on experience using analysis & design tools like PLAXIS 2D/3D, SLOPE/W, A-PILE & L-PILE is required.
• Knowledge of STAAD Pro, SAFE, ETABS will be an added advantage.
• Ability to work independently as well as in a team.
• Ability to manage tasks as per priorities.
• Good verbal and written communication skills

For a confidential discussion please send your cv to [email protected]

To view more roles within the Construction & Engineering | Project Management Sector please visit our LinkedIn page @ Artemis Executive Solutions or https://www.careers-page.com/artemisexecutivesolutions We thank you for taking the time to apply but due to the high volume of applicants, we regret to inform you that only shortlisted applicants will be contacted.

EA Lic. No. 23C1598 | R1330228

Responsibilities

• Act as the point of contact between the manager and internal/external clients
• Screen and direct phone calls and distribute correspondence
• Handle requests and queries appropriately
• Manage diary and schedule meetings and appointments
• Make travel arrangements
• Take dictation and minutes
• Source office supplies
• Produce reports, presentations and briefs
• Devise and maintain office filing system

Requirements and skills

• Proven work experience as a Personal Assistant
• Knowledge of office management systems and procedures
• MS Office and English proficiency
• Outstanding organisational and time management skills
• Up-to-date with latest office gadgets and applications
• Ability to multitask and prioritize daily workload
• Excellent verbal and written communications skills
• Discretion and confidentiality
• High School degree
• PA diploma or certification would be considered an advantage

Job Highlights:

• Verified leads will be provided
• Attractive commission payout (Basic salary only for selected candidates)
• Friendly & positive working culture
• Full training will be provided by management
• Good operational & marketing support is provided
• Flexible working hours (After 6 months)
• Candidates without experience are welcome to apply

Job Scope:

• Sales acquisition for renovation projects (Verified leads will be provided)
• Space planning and design proposal
• Preparation of quotation based on clients’ requirements
• Project management for renovation works including site supervision and project coordination
• Schedule workflow to meet customers' dateline.
• Work closely with sub-contractors and suppliers to ensure smooth handover
• Responds to clients’ email/tele-enquires in a timely and professional manner
• Travel to jobsite during renovation period
• Manage all projects from proposal to execution, then handover

Requirements:

• Candidates with higher NITEC, Diploma & Bachelor Degree is preferred
• Knowledge in Photoshop & AutoCAD is preferred
• Candidates without the required educational background are welcome to apply and will be reviewed on a case by case basis
• Committed, driven and self-motivated individuals
• Good communication skills and excellent time management
• Possess a positive and vibrant personality
• Ability to combine logical thinking with creative flair, with an eye for details
• Preferably Singaporean

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button.

Alternatively, candidates may send their resume via WhatsApp to +65 9223 9599

*(We regret to inform that only shortlisted candidates will be invited for an interview)*

Job Description:

1. Design and development of ASIC, FPGA, PCB and Embedded based systems.
2. Expert level in Verilog/VHDL coding, System Verilog and UVM
3. Design verification and synthesis of ASIC/FPGA chips
4. Experience in firmware or software application development with C or C++.
5. Involve in System Architectural definition, hardware/software system integration, testing and troubleshooting.
6. Participate in new products definition and design.
7. Provide technical support to customers.

Job Requirements:

1. Candidate should possess a bachelor’s or master’s degree in the field of Electrical or Electronics Engineering, Computer Science or equivalent.
2. At least 3 years of experience in ASIC/FPGA/Embedded system design.
3. In-depth knowledge and expertise in VHDL, Verilog, System-Verilog, UVM, C and C++.
4. Well versed of ASIC/Xilinx/Altera design flow.
5. Familiar with UNIX/Linux environment and scripting.
6. Self-motivated, creative, resourceful, strong analytical and troubleshooting skills.
7. Should be able to work independently, has a good team spirit, a strong sense of responsibility, a creative problem solver and be easy to get along with others.

This job can be supported by Career Conversion Programmes (CCP).

ROLES & RESPONSIBILITIES

• Lead the planning and implementation of the project from working with Creative, Research, and Development on materials to use, fabrication, installation and commissioning.
• Create and execute project work plans and implement the necessary changes to meet changing needs and requirements to achieve the project objectives.
• Define critical path, anticipating potential problems and propose appropriate solutions to overcome these problems effectively and efficiently.
• Manage project budget and cost management. Great sense in pricing strategy and cost structure.
• Track project deliverables using appropriate tools such as Microsoft Project.
• Review project progress and to communicate timely to the various stakeholders.

REQUIREMENTS

• Minimum Diploma with at least 3-4 years of relevant experiences.
• Good knowledge in cost and quality control, resources planning and on-site operations.
• Strong presentation and communication skills, as you are the connection between client and team.
• Strong technical knowledge – able to read technical drawings and understand production requirements.
• Prior experience with planning and executing multi-faceted, complex integrated events (virtual, hybrid and physical) will be a bonus.

Join our team of Design Engineer for a rewarding career in designing our product for some of the world’s most advanced semiconductor customers. This position requires the incumbent to support all phases of design project according to the product test specifications. Working with the team, the Design Engineer will gain knowledge of the latest technology and the opportunity to work on newly developed products.

He/ She possesses mastery of design fundamentals and technical skills to execute design concepts required for EQT product. He/ She is able to work on multiple projects concurrently and deliver on expectations within tight deadlines. He/ She provides engineering support in resolving production challenges including quality, on-time delivery and technical challenges to achieve total customer satisfaction.

Responsibilities

• Perform 3D Modelling / 2D Drafting / Thermal & Flow Stimulation using computer-aided design software (Solidworks, 3D CAD tools, etc.).
• Understand the project and task scope assigned and work accordingly to complete the project within the deadline.
• Must ensure that the final designed product quality and deliverables meet the required specifications and standards.
• Monitor and achieve departmental and individual Key Performance Indicators (KPIs) targets related to project delivery, quality, and productivity.
• Collaborate with Assistant Manager/ Staff Engineer/ Senior Engineer to ensure daily engineering tasks are well-controlled, monitored, and on track.

Requirements

• Studies in any Engineering Discipline (Mechanical, Mechatronic, E&E, Precision Engineering)
• Min 1 - 3 years of Product Design competence, good troubleshooting capability.
• Proficient in Solidworks, GD&T or any 3D CAD Tools. Knowledge of Flow & Thermal Simulation is an added advantage.
• Well versed in Microsoft Office. Knowledge of GSS & PDM system is advantageous.
• Possess knowledge in semiconductor testing environment.
• A positive learner, meticulous worker and a team player.

Job Highlights:

• Monday – Friday: 8.30am to 5.30pm
• Walking distance from Ubi MRT station

We are looking for motivated self starters to run day to day operations of our business. You will need to have strong people skills. You will be managing a small team of crew. Seek to achieve objectives set by management. If you feel that you are the right person, do send us your resume for an interview.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / Automation Engineer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.00 pm)
• Salary Package: Up to $4,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project-related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or overseas
• Project presentation & documentation
• To work with third-party engagement wherever necessary for project-related matters

APPLY NOW!!!

• Diploma / Degree
• Min 5 years of relevant experience
• Proficient in PLC programming is compulsory

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65637 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Duties & Responsibilities:

RF/Analog/PMIC/Clock management/Mixed Signal Circuit Design, such as PA/LNA/Mixer/VCO/Filter/VGA/LDO/Buck/ADC/DAC/PLL, develop and testing of connectivity IC for short range RF wireless applications such as Bluetooh, WLAN, Zigbee, NFC, GNSS etc.

Skills/Experience:

· PhD in Microelectronics/Digital Communication/EE

· RFIC design experience in RF/Analog/Mixed signal circuits using CMOS/SiGe/GaAs process

· Both junior and senior position are opened for application

· Have knowledge in RF/Analog design and verification flow using CAD simulation and verification tools from Cadence, Keysight (Formerly Agilent) and Mentor Graphics etc

· Hands-on experience in the design of RF/Analog/Mix signal blocks such as (but not limited to) PA/LNA/Mixer/VCO/Filter/VGA/PLL/ADDA, PMU etc

· In depth knowledge and design experience in mixed-signal systems and circuit design/verification of PLL/frequency synthesizer will be a plus

· Good knowledge in RF/Analog evaluation flow and operation of test equipment to evaluate RFIC performance

· Some experience in script writing such as pearl, skill, matlab etc will be advantageous

· Highly motivated, able to work independently and demonstrates strong analytical and communication skills

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

Responsibilities

1) To ensure system design and shop drawing submissions are in accordance to specifications.

2) Plan and monitor all system design and shop drawing submissions to ensure submissions are accurate and on schedule.

3) To analyze technical specifications and develop concept drawings, system designs, shop drawings and fabrication drawings and ensure compliance to specifications.

4) Assist in setting up systems and processes to improve the standards and efficiency of the Technical Department.

5) Ensure the design process complies with all legislations, standards and codes of practice where appropriate.

6) To collaborate with the Technical and the Project team to develop and implement effective design strategies.

7) Attend sales, technical and Project meetings when required.

Andy Fisher Workshop Pte Ltd (AFW) is a Singapore-based design consultancy offering integrated architectural and interior design services across SE Asia and world. We are seeking applicants with proven experience especially in hospitality, residential, high-end residential hospitality, commercial or mixed-use projects, for the role of Designer in our growing studio.

The Role:

• Design and follow through projects from conception to completion, with a focus on developing concepts into detailed design documentation sets.
• Work as a part of a team of designers to deliver design presentations and technical packages within given timelines.
• Work closely together and report to senior management.
• Coordinate and communicate with clients and consultants.
• Assist with project management and administrative tasks relating to the project.

Role Requirements:

• Demonstrate minimum 7 years of strong design and relevant experience.
• Excellent communicator – both graphically and verbally.
• Ability to multi-task and meet given deadlines.
• A good team player – communicative, self-motivated to grow knowledge, willing to take initiative, open minded and positive learning attitude with the ability to work in a fast-paced environment.
• Relevant educational qualifications (degree/diplomas/professional accreditation).
• Excellence in AutoCAD, Photoshop, 3D and presentation software. BIM experience is a plus.

LA Design Studio is a dynamic interior design firm known for its creative edge and exceptional designs. We pride ourselves on transforming spaces and creating environments that resonate with our clients’ visions.

Job Summary:
We are seeking a talented and creative In-House Videographer to join our team. This role involves capturing high-quality video content, primarily focusing on the progression of our design projects for captivating before-and-after showcases. The candidate will also be responsible for filming various other projects as required, sometimes during weekends.

Key Responsibilities:

· Project Documentation: Regularly visit project sites to film work-in-progress, ensuring that key stages of the design and development process are captured effectively.

· Before-and-After Videos: Create compelling before-and-after videos that highlight the transformation achieved by our design projects.

· Event and Promotional Filming: Film company events, interviews, and promotional content as needed.

· Editing and Post-Production: Handle the editing process to produce final cuts that align with our brand’s aesthetic and quality standards.

· Collaboration: Work closely with the design team and other departments to understand the project requirements and objectives.

· Equipment Management: Maintain and manage video equipment, ensuring it is in good working order and available when needed.

· Flexible Scheduling: Be available to film on weekends or outside standard business hours when required for specific projects or events.

Qualifications:

· Bachelor’s degree in Film, Media Production, or a related field.

· Proven experience as a videographer, with a strong portfolio showcasing your skills.

· Proficiency in video editing software (e.g., Adobe Premiere Pro, Final Cut Pro).

· Excellent eye for detail and a creative mindset.

· Ability to work independently and as part of a team.

· Strong organizational and time-management skills.

· Flexibility to work during non-standard hours, including weekends.

· Passion for interior design is a plus.

What We Offer:

· A creative and collaborative work environment.

· Opportunities to work on diverse and innovative design projects.

· A competitive salary and benefits package.

· Professional development opportunities.

How to Apply:

Please submit your resume, cover letter, and a link to your portfolio or samples of your work to [email protected].

We look forward to seeing your creativity and passion for videography!

Requirements:

· Degree in Architecture

· Min. 3 years of project working experience in Singapore

· Experienced with entire project processes including authorities submission & site inspections

· Able to manage various project types independently

· Liaise and communicate closely with clients' reps, consultants & contractors

· Proficient in AutoCAD & Adobe Suite softwares

· Skills- project management, contract administration, design, & presentation

Job scope:

• Independently ensure the achievement design intent whilst complying with various technical requirements from external bodies or, with regard to approved major architectural projects, through various project stages to its completion.
• Produce architectural drawings as directed by the Directors & as required for the project, in an effective, efficient & professional manner.
• Assist in the design presentation of architectural projects.

Responsibilities:

· Monitor and guide the performance, standards, and work quality of junior designers

· Assist GM in managing interior designers’ schedule and deliverables

· Provide design, creative directions and solutions to the interior designers.

· Present and sell design intent during pitching job

· Support Project Leader from beginning to the full completion of the project

· Attend adhoc meetings involving design & project related matters when required: client & design meetings, project & site meetings, etc.

· Ensure all design changes and solutions are well implemented and coordinated into the project design documentation

· Monitor design intent implementation or advise any design changes on site

· Able to work on multiple projects concurrently.

· Any other duties as assigned.

Requirements:

· Recognized Degree/Diploma in Interior Design or equivalent qualification.

· Proficient in 3-D studio MAX, Sketchup, AutoCAD, Photoshop, Illustrator and other design related software.

· Minimum 8-10 years related experience in commercial design works, strong in technical knowledge, shop drawings, site survey and detail drawings.

· Experienced in handling projects start-to-finish, sales, design and execution.

· Possess excellent flair in creative design works and keen eyes for design details.

· Highly proactive with excellent coordination/execution skills.

· Team player and possess good communication skills.

· Able to deliver expectations within tight deadline