• Administrative Support: Provide general administrative support, including managing phone calls, emails, and office supplies.
• HR Records Management: Maintain and update employee records in the HR system, ensuring accuracy and confidentiality.
• Staff Welfare Coordination: Help organize employee welfare activities, including staff events and recognition programs.
• Document Preparation: Prepare HR-related documents, such as employment contracts, letters, and reports.
• Compliance: Ensure compliance with company policies and local labor laws, assisting in audits and other regulatory requirements.
• Other Duties: Perform additional tasks as needed to support HR and administrative functions.

Job Description

· Handle Accounts Payable entries

· Checking monthly supplier statements and reconciliation

· Clear queries from business units and suppliers

· Email payment advice to suppliers

· Check and process staffs’ claims

· Ensure adherence to the accounting processes and policies

· Other duties as assigned

Requirements:

· Only for Singaporean

· Experience in accounting, good knowledge of Excel

· Ability to work independently

· High degree of accuracy and attention to detail

Job Responsibilities:

• To upkeep the environmental health safety aspects of the company
• Achieve accident frequency rate and accident severity rate below industry average
• Maintain zero safety demerit points from Ministry of Manpower
• Implement practical pollution control measures, material wastage control and re-cycle programs to safeguard the environment for future generations
• Train and brief all workers and staff on EHS

Job Requirements:

• Diploma or Degree in Safety Management or its equivalent
• Registered WSH Officer with MOM & Registered ECO with NEA
• Attended Risk Management Training
• Experience in local construction industry preferred

Diploma or Degree in mech/ civil/ industrial engineering with 6-10 years of experience , Willing to work at construction site and process plants . Expect fabrication, piping standards, equipment installation , with erection and commissioning knowledge . Atleast 2 of the above is a must . Candidates without necessary qualifications but willing to learn and come up are encouraged to apply too

· Ensure that the worker carried out the works in accordance with quality requirement and assist them if necessary.

· Strong technical knowledge of construction materials and methods.

· Ensure projects are completed within budget and in accordance with contractual agreements and quality standards.

· At least 3 years (s) of working experience in construction is required for the position.

· Prepare and submit progress reports to management.

· Supervised subcontractors, vendors and staff to ensure safety protocols were strictly adhered to and all safety policies were being followed.

· To mange control and moniter of daily project works, instruction and progress.

· Excellent communication and interpersonal skills.

· Develop and maintain positive working relationships with subcontractors, suppliers, and customers.

· Plan, organize and oversee construction projects from start to finish

Site M&E Engineer

• Supervise and coordinate the activities of M & E site contractors;
• Monitor job progress and ensure that M&E contract works meet all practical, commercial, requirements of productivity, quality, and contract target completions;
• Ensure all M&E works are carried out within established budgets and schedules;
• Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.
• Implement and oversee site projects assigned to ensure smooth project execution
• Manage internal and external contractors well to ensure the quality and scope of work are within specifications.

Requirements

• Min 5 years of A & A new build warehouse projects relevant working experience
• Good communication skills and a team player
• Positive working attitude and highly adaptable

Roles & Responsibilities

· To support Automation Engineers in automation projects required computer network and security system.

· Responsible for computer network and cloud system integration

· Simple programming and troubleshooting on computer network and security system

· Other ad-hoc duties

The Candidate

· You must have at least an ITE NITEC in lT system and Networks

· An independent problem-solver, a pleasant personality, communicates well and a team player.

Responsibilities:

• Develop process knowledge based on customer requirements to demonstrate the feasibility of the application. This often requires rapid prototyping and/or product demonstration for clients.
• Perform optics and laser experiments
• Assess materials combinations and joining methods for best interconnect reliability
• Development of new processes for interconnects from concept to deployment
• Conduct research on semiconductor market trends and market requirement
• Provide pre and post-sales technical support; working with the customer from prior to the sale, through delivery and installation.
• Obtain practical hands-on experience with existing equipment. Gain a fundamental understanding of equipment functionality and usage.
• Develop test plans and execute experiments to analyze and characterize bonding interconnect mechanisms.
• Contribute to product development projects. Perform work in cooperation with marketing and other engineering functions (software, mechanical, systems)
• Provide technical expertise through technical presentation, sales presentations, product demonstrations, installation and maintenance of company products.
• Assist the sales staff in assessing potential application of company products to meet customer needs and prepare detailed product specifications for the development and implementation of customer applications/solutions.
• Conduct new product capability assessment and validation.
• Provide follow-up support to company sales staff and customer personnel by disseminating technical information on specific applications.
• Enhance equipment capability through process-driven knowledge development.
• Develop and create reference documents for process-of-record standards
• Prepare technical reports as required. Present concepts, data, and recommendations to management or to customers and maintains reports, files, and records that are required by company policy and standard professional practices.

Requirements:

• Bachelors Degree / Masters Degree strongly preferred / PhD Degree welcome, in Material Science, Physics, , Mechanical or Electrical engineering
• Knowledge in laser theory and operations is a plus.
• Hands-on experience with laser welding is a plus.
• Experience in Manufacturing/ packaging/Design/Automation experience is a plus
• 2-5 years of experience in engineering or research development
• Minimum 2 years of CAD experience (NX experience is a plus)
• Sound engineering judgment
• Strong analytical and problem-solving skills.
• Experience with statistical tools and statistical software (Excel, Minitab, etc) is a plus
• Recent graduates with strong portfolio are welcome
• In-depth knowledge of electro-mechanical system is a plus
• Experience with Design of Experiments (DOE) is a plus
• Experience with Ultrasonic bonding is a plus
• Good written and verbal communication, interpretation, and interpersonal skills.
• Able to work independently as well as within a team.
• Adopts a Growth Mindset approach when facing challenges.
• Good verbal and written communication skills.
• May be required to travel locally/internationally to provide on-site technical support to customers, typically up to 10-25% annually.

Duties:

-Reports directly to PM/PD and will assist to overlook a project

Good attitude and work under pressure

- Good knowledge of site installation and coordination

- Good knowledge in technical know how

- Can liase with Maicon for site coordination, internally with our drafter and purchaser and site personnels.

- Understand how to work with subcontractor to get onto site progress

Requirements

- Preferred to have electrical background

- Minimally 6 years of electrical experience in Singapore

My client is looking for qualified candidates with specialised and deep technical skills acquired through extensive industry experience. Pending experience, the candidate can apply for an Assistant/Manager, Senior or a Lead Professional Officer role.

The successful candidates will be part of their pool of academic staff under the Professional Officers (PO) scheme. They form the talent pool which brings a much-needed industry perspective to student learning. They facilitate applied learning and applied research in the institution, complementing the academic expertise of the faculty to bring industry practices and applications into the curriculum.

Professional Officers leverage on their industry experiences to create authentic learning environments, where discovery and innovation take place. They act as coaches and mentors to students during practical learning activities such as laboratory sessions, Capstone Projects and the work study programme. Professional Officers could also lead or work with faculty on industry innovation projects to provide solutions to the industry.

In addition to their role in applied learning and applied research, Professional Officers manage the centralised laboratory facilities and resources in the institution. With Technical Officers, laboratory safety professionals, and administrators in department, they jointly develop central policies and processes for the safe and seamless operation of laboratories in the institution.

Key Responsibilities

• Design and teach labs & practice modules.
• Mentor students in Capstone Projects and the Integrated Work Study Programme (IWSP).
• Lead or co-lead innovation projects with industry.
• Manage labs and equipment to support academic programmes and applied research.
• Ensure safety in labs.

Job Requirements

• A good degree in Mechanical Engineering or a related field. Masters, PhD and/or relevant professional certifications like registered PE would be advantageous.
• Deep technical specialist with 10 or more years of working experience in mechanical design, systems design and integration or related area in mechatronics would be preferred.
• Experience in following areas are highly desirable:

1. Complex Mechanical systems development and integration
2. Material and components selection including working knowledge with integration and selection of components/systems such as actuators, pumps, hydraulics system, PLC/Controls systems
3. CAD software such as SolidWorks
4. Simulation such as Finite element and CFD simulation
5. Hands-on prototyping and fabrication skills to guide students in labs
6. Material testing and material properties
7. Programming of Control and PLC systems
8. Software such as Ansys and Abaqus

• Extensive hands-on experience and knowledge of industry practices and engineering principles to bring industry perspective to the University.
• Keen interest in innovation projects, with demonstrated ability in developing solutions to technical problems.
• Strong supervisory skills and enjoy working closely with students in an educational environment.
• Demonstrate proficiency to keep abreast of development in the field and pursue professional certification programs. Possess industrial certifications in relevant areas will be an added advantage.

Interested candidates are invited to submit their MS Word formatted CV with the current and expected salary remunerations.

• JonDavidson Pte Ltd • EA Lic-22S1412 • MOM Reg No-R1440770 •

Descriptions: Site supervisor -construction

Requirements: Supervision of Industrial Airconditioning and ducting installation including control panel. Knowledge of electrical control circuit and should be very hard working

Need to attend site meeting and submit progress report

Responsibilities:

• Participate in manpower planning, providing suggestion on manpower requirements, advise on statutory requirements and provide projected manpower costing
• Conduct Training Needs Analysis for all subsidiaries
• Manage training requisition process and maintain training records
• Organize and liaise with educational institutions on internships and other programs (e.g.Work-Study Diploma)
• Ensure the delivery of HR Services is executed efficiently and in compliance with local rules and regulations
• Support all leave and benefits administration (including insurance), as well as handle monthly payroll process, work pass administration and participate in government surveys
• Own the employees’ data along the life cycle from the hiring to termination process (e.g. payroll changes, termination documents)
• Manage processes on staff’s confirmation, contract renewal, resignation, and salary review exercises
• Monitor headcount changes and compilation of HR reports
• Timely follow up on the off-boarding process, ensuring exit interviews and exit clearance are appropriately completed
• Responds to changes in Employment Act by reviewing policies and procedures in place.
• Facilitate annual performance appraisal exercise and bonus exercise.
• Any other ad-hoc HR projects as assigned.

Requirements:

• Minimum Diploma in Business or Human Resources Management or equivalent
• More than 3 - 6 years of experience in HR role preferably in an IT related industry

Sub-team Description

Our SRE (Site Reliability Engineer) team is driven by a clear mission: to enhance system availability and scalability. By blending the expertise of software development and system operations, we are uniquely positioned to tackle the challenges of maintaining large-scale distributed systems. We aim to construct a robust e-commerce infrastructure that can seamlessly handle the demands of a rapidly evolving marketplace. Furthermore, we are dedicated to creating an efficient SRE ecosystem that optimizes every aspect of our operations, ensuring a smooth and reliable experience for our users.

Job Description

• Responsible for researching, designing, and developing cutting-edge computer and network software, as well as specialized utility programs. This role involves ensuring efficient, effective, and innovative software solutions to meet organizational and user needs.
• Tasked with understanding and analyzing system requirements, this role leverages principles and techniques from computer science, engineering, and mathematical analysis to develop tailored software solutions. The position ensures that software functionalities align with system requirements while maintaining technical excellence.
• Responsible for updating and enhancing current software functionalities, this role focuses on continuous improvement of software performance and continuous delivery efficiency.
• Collaborating closely with computer hardware engineers, this role focuses on the seamless integration of hardware and software systems. The position is also responsible for developing clear specifications and performance requirements to ensure efficient and optimized system performance.

Requirements

• Bachelor’s degree or higher in Computer Science, Information Technology, Programming & Systems Analysis, or a related field.
• Minimum of 3 years working experience in Kubernetes development.
• Proven knowledge of computer networks (TCP/IP, DNS), with a minimum of 3 years relevant experience.
• Extensive and hands-on knowledge of Linux operating systems (Ubuntu, CentOS, etc.)
• Hands-on experience with at least one of the scripting/programming languages: Python, Go
• Demonstrates a strong sense of ownership and dedication to delivering high-quality work.
• Quick to adapt and collaborate effectively within a team environment.
• Exhibits meticulous attention to detail and a careful, thoughtful approach to tasks.

Preferred Experience:

• Experience in Service Mesh solutions
• Experience in traffic scheduling solutions, e.g. Nginx, APISix, OpenResty
• Experience in eBPF
• Experience in large-scale project management, demonstrating expertise in overseeing multifaceted tasks, coordinating cross-functional teams, and ensuring timely and successful project delivery

Summary

The people here at Apple don’t just build products — they build the kind of wonder that’s revolutionized entire world. It’s the diversity of those people and their ideas that inspires the innovation that runs through everything we do, from amazing technology to industry-leading environmental efforts. Join Apple, and help us leave the world better than we found it! Are you ready to be part of a team that turns innovative ideas into extraordinary products and experiences? The Apple Services Engineering - Experimentation data engineering team provides insights through data that drive decision-making for our engineering and product teams. We are looking for a Data Pipeline Engineer who can automate and build data pipelines for our search and recommendations features. Imagine what you could do here. At Apple, creative ideas have a way of becoming wonderful products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish.

Description

This team designs, executes and builds tools for online experiments (A/B tests) and offline experiments (human relevance judgement) that help us improve and fine tune our data-driven features. Your primary focus will be to automate the delivery of various datasets by working with Data Scientists on the team to understand critical metrics/KPIs and how they are derived. You will write and maintain the code that ingests, computes and organizes various data sets.

Minimum Qualifications

• Bachelors in Computer Science/Engineering or related field
• 3-5+ years’ demonstrated experience with Big Data systems, ETL, data processing, and analytics tools
• Proven experience working on big data systems and distributed computing, such as Hadoop and Spark
• Experience with programming languages such as Scala, Spark or Python
• Experience maintaining a large software system and writing a test suite

Preferred Qualifications

• Proficiency in using query languages like SQL, Hive and SparkSQL
• Experience with entity-relationship modeling and understanding of normalization
• Experience with sessionization of clickstream and time-series data is a plus
• Familiar with the concepts of dimensional modeling
• Experience with Continuous Integration, Version Control such as git
• Experience with data visualization tools, such as GGplot, etc
• Deep understanding of data structures and common methods in data transformation
• Keep up-to-date with the newest technology trends
• Working with software engineering teams to improve data collection procedures
• Processing, cleansing, and validating the integrity of data used for analysis
• Engineer code that is durable and reliable
• Performance tune and optimize code as data grows and needs change
• Generate reports (that can be automated) to present key insights to internal partners and leaders across engineering and product teams
• Showcase real passion for visualizing and making sense of data analysis

Job Responsibilities:

• Reporting to Contracts Manager
• Prepare tender submission; handle progress claims and progress payment, VO & finalization of accounts
• Liaise and establish rapport with consultants, quantity surveyors, architects, developers, and contractors on certification of claims for payments

Requirements:

• Degree/ Diploma in Building/ Quantity Surveying
• 2-5 years’ relevant experience with the contractor
• Meticulous, analytical with excellent problem-solving skills, proactive, good team player, and able to meet tight deadlines.

About US

UTEC was first established in Singapore on 9 December 2014 and we specializes in civil and tunnel infrastructure construction works, with projects based locally and throughout Asia Pacific. The Company draws on the skills and expertise of its people to deliver tailored underground engineering solutions, striving to provide the best engineering solution and economics to its client. Since its establishment as a Contractor in underground works, the Company has been involved in projects not only in Singapore, but as far as India as well.

OUR VISION

Providing innovative, cost effective & sustainable solutions to underground works, bringing the best engineering solutions to our clients and all the stakeholders.

About This Role

1) Responsible for Estimating, Planning, Scheduling, Coordinating and Supervision to Setting-up, Installing & Maintenance of Following Equipment.

• TBM (Tunnel Boring Machine)
• STP (Slurry Treatment Plant)
• ECM
• Air Supply System
• Batching Plant
• Tunnel Ventilation System
• Temporary Communication System (RFID, Telephone, Fire Fighting, Gas Detector) Installation and Maintenance
• Locomotive
• Chiller Plant
• Gantry Crane
• Dewatering System
• Water Cooling Tower
• 22KV Sub-station

2) Responsible for Writing of Power ON Documents for TBM (Tunnel Boring Machine) and 22Kv Sub-station.

3) Planning of Power Distribution System for Bored Tunnel & Entire Site.

4) Maintenance and Troubleshooting of TBM, Electrical System, Locomotives, Batching Plant, Cooling Towers, and other Tunnel Facilities.

5) Estimation and Ordering Electrical Equipment, Spare Parts Based on Required Specification.

6) Preparation for TBM Initial Drive and Main Drive.

*This role is on 5.5 days workweek and work location is currently located at the East of Singapore (Changi area).

*More details of the role, company and benefit will be shared during the interview for shortlisted candidate.

These are our Featured Projects that we are Proud to show you:

SINGAPORE

1) PUB – Deep Tunnel Sewage System Contract T-11,

2) LTA – Thomson Line T206

OVERSEAS

1) INDIA - Mumbai Metro Line 3 – UGC07

2) MALAYSIA - Prasarana Malaysia Bhd – LRT3

3) HONG KONG - CEDD – Kai Tak Development Stage 3B

AND MORE ARE ONGOING AND COMING!

About Us

UTEC was first established in Singapore on 9 December 2014 and we specializes in civil and tunnel infrastructure construction works, with projects based locally and throughout Asia Pacific. The Company draws on the skills and expertise of its people to deliver tailored underground engineering solutions, striving to provide the best engineering solution and economics to its client. Since its establishment as a Contractor in underground works, the Company has been involved in projects not only in Singapore, but as far as India as well.

OUR VISION

Providing innovative, cost effective & sustainable solutions to underground works, bringing the best engineering solutions to our clients and all the stakeholders.

About This Role

1. Coordination with relevant parties: LTA, QPS, QPD and other sub-contractors and suppliers.

2. In charge of site operations with Safety and Quality Assurance.

3. Overall manage site manpower, equipment and materials according to site requirement in consider in conjuction with cost saving.

4. Report to Senior Manager on all relevant project matters and implement the integrated strategy according to company requirement.

Qualifications

• Experience in tunnel construction, project management, and engineering
• Knowledge of innovative tunneling technologies like Tunnel Boring Machines (TBM)
• Familiar with CAD and other general office software.
• Strong leadership and communication skills
• Ability to manage timelines and resources effectively
• Health and Safety certifications and training
• Problem-solving and decision-making abilities
• Bachelor's degree in Civil Engineering or related field

*This role is on 5.5 days workweek and work location is currently located at the East of Singapore (Changi area).

*More details of the role and company will be shared during the interview for shortlisted candidate.

These are our Featured Projects that we are Proud to show you:

SINGAPORE

1) PUB – Deep Tunnel Sewage System Contract T-11,

2) LTA – Thomson Line T206

OVERSEAS

1) INDIA - Mumbai Metro Line 3 – UGC07

2) MALAYSIA - Prasarana Malaysia Bhd – LRT3

3) HONG KONG - CEDD – Kai Tak Development Stage 3B

AND MORE ARE ONGOING AND COMING!

Job Scope:

• Benchmarking and Process Development: Responsible for new equipment benchmarking, process development, technical strategies, and technical roadmaps at the Central Backend Manufacturing & Technology (BEM&T) function.
• Technical Expertise: Provide technical expertise and recommend solutions for the development and design of equipment to maximize overall equipment effectiveness.
• Standardization: Harmonize and standardize manufacturing equipment and solutions across all BEM&T sites worldwide.
• Coordination and Communication: Maintain a strong coordination and communication network with both local and overseas back-end manufacturing sites.
• Supplier Collaboration: Partner with suppliers and subcontractors on new equipment projects, including commissioning and installation.

Job Requirements:

• Educational Background: Relevant bachelor’s degree in Mechanical or Electronic Engineering, or an equivalent field.
• Experience: More than 3 years of experience in Mold, Oven, Safety, or AXI Equipment Engineering.
• Technical Knowledge: Good knowledge and expertise in mold equipment, mold simulation, and mold chase design rules.
• Procurement and Safety: Ability to create centralized technical equipment procurement and safety specifications.
• Communication Skills: Able to express ideas clearly, both orally and in writing.
• Software Proficiency: Proficient in Microsoft PowerPoint, Excel, Word, and AutoCAD applications.
• Problem-Solving: Solid experience in problem-solving techniques and methodologies.
• Personal Attributes: Requires creativity and assertiveness.

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

The Senior Design Engineer is responsible for engineering and design of grid connected solar photovoltaic systems (including utility-scale and distributed generation projects). He/she will review solar system engineering designs, modelling, and performance data, and provide engineering support during the development and construction process.

Responsibilities:

• Conduct engineering site audits to collect structural, electrical and related site information for use in the design of commercial and utility-scale solar power systems
• Design and coordinate design of photovoltaic (PV) systems, including system components to suit site condition and in accordance to solar engineering standards (IEC, Singapore Standards etc)
• Design and develop electrical single-line diagram, panel schedules and connection diagram for solar electric systems using computer-aided design (CAD) software
• Prepare and follow up the Master Document Register (MDR)
• Perform solar energy production analysis from designed PV systems and seek to optimize efficiency through cost-benefits analysis
• Review specifications and recommend engineering or manufacturing changes to achieve solar design objectives.
• Evaluate plans or specifications to determine technological or environmental implications.
• Recommend technical design or process changes to improve efficiency, quality, or performance.
• Provide technical direction or support to Project Manager and Engineer during installation, start-up, testing, system commissioning, or performance monitoring.
• Create checklists for review or inspection of completed solar installation projects.
• Analyze costs and benefits of proposed designs or projects and performing cost reduction analyses for solar systems.
• Review of EPC’s Scope of Work, Specifications and comments on design and installation

Requirements:

• At least 3 years of commercial PV system design and engineering
• Bachelor's in Engineering (Mechanical, Electrical or related discipline preferred)
• Experience with low, medium and high voltage power electronics
• Competence in energy modelling software such as PVsyst is mandatory
• Competence in Autocad is mandatory
• Well versed in Microsoft Office, especially Excel
• Must be willing to learn and apply new technologies
• Knowledge of codes such as the IEC, Singapore Standards and construction practices
• Working knowledge of standard electrical calculations, basic structural & mechanical calculation

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:
As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:
• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

Summary:

We are seeking a Software Developer to build AI-powered solutions, with a primary focus on Visual Analytics (VA) and opportunities to work in other AI domains as needed. As a generalist, you will take AI models from research to production—whether it involves performing literature surveys, evaluating state-of-the-art (SOTA) models, training custom models, building web frontends for these models, or addressing other project needs. You’ll be expected to collaborate with the team, guide discussions, and take ownership of your projects, ensuring a successful transition from concept to deployment.

Responsibilities:

• Stay up-to-date with the latest trends, research, and advancements in AI.

• Conduct applied research; select and evaluate SOTA models, datasets, and methods to integrate into our internal ecosystem.

• Build and deploy AI applications for various environments (e.g., edge, cloud), making informed decisions about architecture and model selection.

• Building scalable low-latency VA pipelines for numerous video streams

• Collaborating with your team to solve unique challenges and deliver high-quality solutions.

• Share knowledge, tools, and best practices with your team and across departments.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.

• 1-3 years of experience in end-to-end AI application development, from conception to production.

• Strong understanding of AI algorithms and statistical methods. You should be able to implement models from their papers.

• Proficiency in Python, with experience in Machine Learning frameworks (e.g., PyTorch, Flax), web frameworks (e.g., FastAPI, Sanic), traditional databases (e.g., PostgreSQL, SQLite), and vector databases (e.g., Milvus, FAISS).

• Ability to balance independence and collaboration—you are self-driven in solving problems while knowing when to seek input from colleagues.

• Passion and curiosity for the craft—you code, read, tinker, break and explore new AI tools or models in your spare time.

Introduction:

Hostmost Group of Companies is a leading Marine Radio Communications and Navigation system service provider. Established in 1989, we have expanded our operations globally, providing reliable services to clients across different regions. With 14 wholly owned offices and depots spanning Asia to North America, we pride ourselves on maintaining a strong global service network. At Hostmost Group, we believe in continuous improvement and invest in staff training to stay ahead of industry trends and requirements. Our group is currently expanding and there will be several vacancies available.

Job Descriptions:

·Manage sales enquiries and process quotations.

·Process sales or service orders.

·Process draft billings.

·Meet up with customers.

·Any ad hoc duties as assigned

Requirement:

· Diploma & above.

· Minimum 2 years of sales or admin experience. Commensurate with experience.

·Knowledge of SAP will be an advantage.

·Only Locals (Singaporean or PRs) need to apply.

Location:

·Near Pasir Panjang MRT station (SINGAPORE)

Interested candidates who wish to apply for the advertised position, please send full resume with the following details:

1. Reasons for leaving ALL your employment

2. Current & expected salary

Job Types: Full-time, Permanent

Pay: $2,800.00 - $4,500.00 per month

Benefits:

• Dental insurance
• Health insurance

Work Location: In person

Job Summary:

The Applications Support Engineer provides technical support and maintenance for software applications, ensuring their optimal performance and availability. This role involves troubleshooting issues, implementing solutions, and collaborating with other IT teams to enhance system functionality. The Applications Support Engineer is also responsible for documenting processes, managing application configurations, and assisting in the deployment of software updates and patches.

Key Responsibilities:

• Application Support: diagnose and troubleshoot application issues reported by end-users or detected through monitoring tools. Provide timely and effective resolution to application problems, escalating issues when necessary.
  
• Incident and Problem Management: manage and resolve application-related incidents and problems, ensuring root causes are identified and addressed. Maintain an incident log and provide regular updates to stakeholders on the status of issues.
  
• Application Maintenance and Updates: work with development teams to deploy new versions and patches of applications and implement changes. Test and validate updates before deployment to ensure minimal disruption to users.
  
• User Support and Training: assist end-users with application-related queries and provide technical support. Conduct training sessions for users on new features or changes to applications. Develop user guides and support documentation to assist end-users.
  
• Configuration Management: manage application configurations, including settings, permissions, and access controls. Ensure that application configurations are documented and maintained in line with organizational standards.
  
• Collaboration and Communication: work closely with developers, system administrators, and other IT teams to resolve application issues. Communicate effectively with stakeholders, providing regular updates on application status and issues. Participate in project meetings to provide input on application support requirements.
  
• Continuous Improvement: identify areas for improvement in application performance and user experience. Propose and implement solutions to enhance application efficiency and reliability.
  

Requirements:

• Degree in Computer Science, Information Technology, or related field.
• Preferably 2 to 5 years of experience in application support, software troubleshooting, or a related role.
• Beneficial to have experience in an Aircraft Engine Maintenance Repair and Overhaul shop.
• Good knowledge of MS Excel, databases, SQL, and scripting languages (e.g., Python, PowerShell).
• Strong problem-solving and analytical skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong customer service orientation.
• Training provided for candidate without prior experience.

Job Description:

• Responsible for the upkeeping of facilities and equipment.
• Plan and implement effective preventive maintenance program for facilities and equipment.
• Ensure preventive maintenance stipulated are being conducted promptly.
• Coordinate with contractors in relation to facilities/equipment repair and maintenance, ensure their quality and safety standards meet the requirements.
• Closely monitor all critical repairs to ensure short down time.
• Maintain proper documentation.
• Recommend the replacement and upgrade of facilities and equipment through the annual budgeting process.
• Participate in continuous improvement program to achieve cost reduction.
• Perform any other duties as and when assigned.

Requirements:

• Diploma and above, preferably in facilities management, mechanical or electrical engineering.
• Relevant work experience in facilities.
• Licensed Electrician Worker (LEW) accredited by EMA will be an added advantage.

Responsibilities:

• Perform troubleshooting, assist in investigation and resolving production issues
• Identify and implement continuous process improvement and cost control initiatives
• Trending for process parameters
• Manage capability setup for new equipment and processes
• Carry out tolling review and control and submission of capability declaration
• Handle proper documentation for publication review, worksheet amendments and in-house specifications amendments
• Provide technical support to Operations, ensuring productivity efficiency
• Review, investigate and provide solutions to issues raised by Operation
• Carry out training on repair processes and any other related practices

Requirements:

• Degree or equivalent, preferably with experiences in propulsion engines and components MRO facility
• Ability to interpret engineering drawings
• Prior experience in repair processes will be an added advantage
• Familiar with NDT requirements and FAA 45 /EASA 145 regulations

Job Description:

• Provide engineering support to Operations to minimise downtime
• Ability to work independently to identify and troubleshoot test cell related issues
• Handle proper documentation for trending and audit, generate investigation and engineering reports
• Support test facilities maintenance and test cell calibration activities, identify potential problems and carry out preventive actions
• Manage capability setup for new equipment and processes
• Provide technical support to engine correlation activities
• Manage procurement activities and contractor works

Requirements:

• Degree in Electrical and Electronic Engineering or equivalent, preferably with experiences in Test Cell environment
• Ability to interpret engineering drawings
• Knowledge in repair processes will be an added advantage
• Familiar with NDT requirements and FAA 45 /EASA 145 regulations