Job Requirements：

1. Assist in managing day-to-day HR operations (full spectrum) related to staffing.

2. Oversee and support the recruitment process, including interviewing, onboarding, and training new employees.

3. Support the implementation of performance appraisals and assist managers in assessing employee performance.

4. Provide guidance on goal setting, development plans, and performance improvement actions.

5. Maintain records of employee performance and ensure consistency in evaluations.

6. Track employee progress post-training to ensure effectiveness.

7. Ensure HR policies and procedures are followed and aligned with current labor laws and organizational goals.

8. Monitor adherence to workplace health, safety, and legal regulations.

9. Assist in updating employee handbooks and maintaining HR documentation.

10. Prepare regular reports on staffing levels, HR metrics, etc for management.

11. Contribute to developing HR strategies aligned with the overall organizational goals.

Job Requirements：

1. Bachelor’s degree in Human Resources, Business Administration, or related field.

2. Additional HR certifications (CIPD, SHRM-CP, IHRP-CP, IHRP-SP, etc.) are a plus.

3. At least 5 years of experience in Human Resources, with a focus on staff management or employee relations.

4. Ability to mediate and resolve conflicts professionally.

5. Willingness to continuously update knowledge on HR best practices and labor law changes.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Summary:

The Senior Planner for FPSO projects is responsible for developing, maintaining, and monitoring project schedules, ensuring all project phases align with timelines, resources, and milestones. This role involves extensive planning and coordination, collaborating with cross-functional teams to optimize project execution and track progress. The Senior Planner will provide analytical support to project leadership, ensuring efficient resource utilization and identifying potential schedule risks to mitigate delays.

Key Responsibilities:

• Project Scheduling and Planning:Develop detailed project schedules for all FPSO project phases, including engineering, procurement, construction, commissioning, and installation.
  Utilize planning software (e.g., Primavera P6, MS Project) to create and update schedules, tracking critical paths, dependencies, and progress.
  Conduct resource loading and leveling to ensure optimal allocation of labor, materials, and equipment.
  
• Progress Monitoring and Reporting:Monitor project progress and performance, preparing weekly and monthly reports to provide insights on schedule adherence and completion forecasts.
  Implement Earned Value Management (EVM) and other project control techniques to track project progress, productivity, and variances.
  Present schedule updates, critical paths, and potential risks to project stakeholders, recommending corrective actions where necessary.
  
• Risk Management and Mitigation:Identify potential schedule risks and conflicts, performing risk analysis and developing mitigation plans to avoid delays.
  Conduct "what-if" analyses to evaluate alternative schedules and contingency planning to address any project changes.
  Collaborate with the project team to adjust schedules in response to project changes or unforeseen issues, ensuring minimal impact on deadlines.
  
• Cross-Functional Coordination:Work closely with engineering, procurement, construction, and commissioning teams to ensure alignment and integration of schedule activities.
  Interface with contractors and vendors, monitoring their schedules to ensure they align with overall project timelines.
  Facilitate regular planning meetings to review progress, resolve issues, and optimize workflows.
  

Qualifications and Experience:

• Bachelor’s degree in Engineering, Project Management, or a related field.
• 8+ years of experience in project planning and scheduling, with a focus on FPSO or offshore oil and gas projects.
• Extensive knowledge of planning software, such as Primavera P6 and MS Project, with experience in advanced scheduling techniques.
• Proficiency in Earned Value Management (EVM) and critical path analysis.

Skills and Competencies:

• Strong analytical and problem-solving skills with a meticulous attention to detail.
• Effective communication and interpersonal skills for cross-functional collaboration and reporting.
• Ability to handle multiple priorities and manage schedule adjustments under time-sensitive conditions.
• Strong understanding of offshore project lifecycles, including FPSO-specific challenges and requirements.

Job Summary:

The Project Engineer is responsible for planning, coordinating, and executing engineering projects, ensuring they are completed on time, within budget, and to the required quality standards. This role involves working closely with project managers, engineering teams, and other departments to ensure successful project delivery. The Project Engineer will be involved in project planning, technical review, and site coordination, providing essential support throughout the project lifecycle.

Key Responsibilities:

• Project Planning and Coordination:Assist in defining project scope, objectives, and deliverables, ensuring alignment with client requirements and business goals.
  Develop and monitor project schedules, budgets, and work plans, using project management tools to track progress and ensure timely completion.
  Coordinate with engineering, procurement, and construction teams to ensure alignment on project milestones and deliverables.
  
• Technical Support and Design Review:Review and interpret technical drawings, specifications, and documentation to ensure engineering quality and compliance.
  Provide technical input to the design process, working closely with design teams to address any engineering challenges.
  Support project manager in evaluating design changes, assessing their impact on project schedules and budgets.
  
• Site Coordination and Quality Control:Conduct site visits as needed to monitor project progress, identify issues, and ensure compliance with design specifications and safety standards.
  Coordinate with contractors, vendors, and suppliers to ensure materials and equipment meet quality requirements and project specifications.
  Assist in conducting quality control inspections, ensuring that installations align with engineering and regulatory standards.
  
• Documentation and Reporting:Prepare and maintain project documentation, including status reports, meeting minutes, and technical documents.
  Provide regular updates to project managers on project progress, potential risks, and any adjustments needed to stay on track.
  Support procurement activities by reviewing material specifications and participating in vendor evaluations as necessary.
  

Qualifications and Experience:

• Bachelor’s degree in Engineering (Mechanical, Civil, Electrical, or a related field).
• 3-5 years of experience in a project engineering role, preferably in [specific industry, e.g., oil and gas, construction, manufacturing].
• Proficiency in project management software (e.g., MS Project, Primavera) and CAD software (e.g., AutoCAD).
• Familiarity with industry standards and codes relevant to engineering projects.

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

The School of Materials Science and Engineering (MSE) provides a vibrant and nurturing environment for staff and students to carry out inter-disciplinary research in key areas such as Computational Materials Science, Characterisation Materials Science, Defence Composite Materials, Functional Composite Materials, Energy, Nanomaterials, Low Dimensional Materials, Biomaterials Materials, Biological Materials, Bioinspired Materials and Sustainable Materials.

For more details, please view https://www.ntu.edu.sg/mse/research.

We are seeking a highly motivated research fellow to join our dynamic team at the School of Materials and Science Engineering at Nanyang Technological University, Singapore. The successful candidate will contribute to cutting-edge research at the intersection of materials science, advanced manufacturing, robotics, and sensing.

Key Responsibilities:

• Conduct independent research in areas related to material science and engineering in soft robotics/self-healing / soft interfaces
• Develop and implement robotic control systems
• Optimization of formulation for UV 3D printing / direct ink writing 3D printing
• Contribute to ongoing soft robotics research
• Design and prototype using CAD software and 3D printing technologies
• Collaborate with faculty and other researchers on interdisciplinary projects
• Publish research findings in peer-reviewed journals and present at conferences
• Assist in mentoring students

Job Requirements:

• Ph.D. in Material Science, Engineering, Robotics, Sensors, or a closely related field
• Strong background in formulations for 3D printing
• Experience in soft robotics applications
• Proficiency in CAD software and 3D printing technologies
• Strong programming skills (e.g., Python, C++, MATLAB)
• Excellent written and verbal communication skills
• Ability to work independently and as part of a team
• Experience with machine learning and AI applications in engineering is advantageous

We regret to inform that only shortlisted candidates will be notified.

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

• Assist the Manager to oversee and manage the Engineering Department.
• Technical review on new project orders and order assignments to Technical engineer & Drafter team.
• Ensure timely submission of engineering documents (Control Schematic Drawing, General Assembly Drawing, Wiring Diagram, Nameplate Drawing, Test Procedure, Data Sheet etc).
• To review project engineering documents prepared by Technical Engineer & Drafter team before submitting them to client.
• Provide advice and guidance to Technical Engineer & Drafter team for any technical queries and to support other ops team on various aspects of technical/engineering matters.
• To check and make recommendations based on common industrial engineering practice.
• To provide and implement cost effective and best engineering solutions for project to stay competitive.
• To provide sound engineering practice and engineering calculation where applicable in a timely manner to meet project timeline.
• To review international standards and/or project specifications for product compliance. i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards etc related to Valve Automation and/or instrumentation.
• Providing field support for customers to resolve after-sales technical issues or technical clarifications.
• To attend internal/external kick off Meeting (KOM) when required.
• Travel with technicians to installation base and sites if the need arises.
• To assist manager to lead the department’s improvement programs and/or process efficiency initiatives.
• To assist manager in maintaining and updating the department's Standard Operating Procedures.
• To carry out Engineering personnel annual performance review to ensure competency and give counselling when required.
• Support new employee orientation by providing brief engineering department process flow training.
• Support and guide the Operations department in resolving aftermarket technical issues such as Product Design changes / Fault Finding / Supplier Discrepancies.

Requirements:

• Bachelor’s Degree / Diploma in Mechanical/Instrumentation or equivalent
• Minimum 6 to 8 years supervisory experience in Valve Automation and/or instrumentation background, preferably in the Valves & Actuators field for Oil & Gas Market.
• Conversant with ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation.
• Possess a strong knowledge of pneumatic and hydraulic circuits.
• Must be able to read and interpret drawings, specifications, and technical documents.
• Knowledge of AutoCAD 2D/3D or drafting software & SAP will be an added advantage.
• Familiar and possess intermediate knowledge in Microsoft Office and Microsoft 365
• Very self-driven and able to drive the team. Possess strong interpersonal skills and can work as a team.
• Strong verbal and written communication skills

• Perform audits and report the effectiveness of the system safety program.
• Support launch vehicle design and development to ensure that customer and internal goals for safety, mission success, and performance are met.
• Ability to develop schedules, manage budget and complete work according to the developed schedule.
• Briefing safety of the program at technical reviews and as part of the safety approval process.
• Support incident investigations with business units, determine root causes and drive corrective actions.

Job Description:

As a Project Engineer specializing in structural steel construction, you will play a pivotal role in the planning, execution, and completion of our projects. Working closely with our project managers, you will oversee all aspects of construction, ensuring adherence to timelines, budgets, and quality standards. This is an excellent opportunity for a talented individual to make a significant impact in the dynamic field of construction engineering.

Key Responsibilities:

• Collaborate with project managers to develop project plans, schedules, and budgets for structural steel construction projects.
• Conduct thorough site assessments and surveys to identify potential challenges and ensure compliance with regulatory requirements.
• Coordinate with architects, engineers, subcontractors, and suppliers to facilitate the timely procurement of materials and resources.
• Manage day-to-day construction activities, including site logistics, safety protocols, and quality control measures.
• Monitor project progress and performance, identifying and addressing deviations from plans and specifications.
• Provide technical expertise and problem-solving support to resolve construction-related issues effectively.
• Prepare and review engineering drawings, specifications, and documentation to ensure accuracy and completeness.
• Foster a culture of teamwork, innovation, and continuous improvement among project team members.

Qualifications:

• Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.
• Minimum of 2 years of experience in project engineering, preferably in the structural steel construction industry.
• Proficiency in Tekla software.
• Strong understanding of construction principles, practices, and techniques.
• Excellent communication, leadership, and interpersonal skills.
• Ability to manage multiple priorities in a fast-paced environment.
• Familiarity with Singapore building codes, regulations, and industry standards.
• Immediate availability will be preferred

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The School plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The School’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

For more details, please view School of Civil and Environmental Engineering | NTU Singapore.

We are looking for a Research Fellow to work on a project ‘Innovative structure systems for next-generation construction’. The role will focus on conducting experimental and numerical studies on novel joints for modular structures and developing new design methods.

Key Responsibilities:

• Conduct experiments on modular structures
• Conduct numerical modelling
• Assess existing design codes
• Propose new improved design methods

Job Requirements:

• PhD degree in Structural Engineering from reputable universities or related field
• Familiarity with Eurocodes on steel and composite structures
• Good written and oral communication skills
• Proficiency in hard skills / job-specific abilities acquired through training e.g. specific programming languages, numeric and analytical skill
• Competent in soft skills / general personality traits: Information visualization, interaction design
• Interpersonal skill: Ability to work independently / develop solutions under strict timelines, meticulous and eye for details / excellent organizational / time management skills)
• Entry level candidates are welcome to apply

We regret to inform that only shortlisted candidates will be notified.

• Up to $2500
• 5.5 day work per week
• Tuas

Responsibilities:

• Perform maintenance and repairs on crane and hoist systems to ensure optimal performance.
• Diagnose and repair mechanical and electrical issues efficiently.
• Assist with the installation of new crane and hoist systems per safety standards.
• Conduct load testing to verify system safety and document results.
• Ensure all work complies with safety regulations and company policies.

Additional Information:

• Candidate possess with electrical and crane/hoist servicing basic knowledge will be added advantage
• Required to WORK AT HEIGHT.
• Willing to learn, positive work attitude and good team player.
• Willing to work overtime when required. OT available.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Responsible for the daily cleaning operations of the site(s)
• Managing a team of Operations Executives and Supervisors
• Planning and scheduling for all Operations Executives and Supervisors
• Liaise with client on the service/cleaning standards
• Ensuring quality assurance for cleaning projects
• Report progress and advancement to Associate Director
• To plan recruitment drives

Requirements

• Establish, monitor, and evaluate cleaning standards and performance metrics to ensure that projects and operations are completed to a high standard

• Prepare and manage budgets for cleaning operations

• Recruit, train, and supervise cleaning staff

• Monitor and control storage and use of cleaning products, supplies, and equipment

• Implement safety measures to protect workers from accidents and injuries

• Establish emergency response protocols and ensure maintenance of all safety equipment

• Work closely with the HR department to ensure compliance with labor regulations

• Assess and optimize training and development plans for cleaning staff

• Develop and recommend cost-saving measures and solutions while maintaining a high-quality service.

Responsibilities:

• Analysing and extracting all submission’s requirement from the tender documentx.
• Responsible for planning, scheduling, controlling the cost of materials, shop drawings submission, coordinating the technical and management aspects of projects
• Work closely with the project team, planning and deploying resources such as manpower, machinery, equipment, and material
• Liaising and coordinating with all parties involved in the projects, ie clients, consultants, relevant authorities and sub-contractors
• Working closely on construction plans with clients, architects, and other professionals
• Investigating the properties of materials like glass, steel, and concrete, and advising which is the most suitable
• Working out the loads and stresses on different parts of a structure
• In charge of project implementation, attending site meetings, inspection, and monitoring of project progress
• Prepare for monthly work progress reports and other project-related reports
• Responsible to ensure safe work procedures are implemented to control risk and maintain cleanliness of the work sites at all times
• Other related duties as and when assigned

Qualifications:

• Polytechnic Diploma/ Degree/ Master in Civil Engineering/Marine Engineering/Construction
• At least 4 years of relevant working experience
• Good team player, able to lead and multi task
• Excellent interpersonal and communication skills
• MS Office skills – Excel/Words/Powerpoint
• Proficient in AutoCad
• Time management and organisation skills
• Positive working attitude and ability to work in a fast-paced environment

Job Benefits:

• Attractive salary package
• 5.5 days’ work a week - Work life balance
• Looking Myanmar and Philippines
• Nearby MRT – Pioneer walkable to company

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Responsibilities:

• Provide technical support and assist Manager in project planning and coordination of all site activities.
• Prepare and revise engineering documents, drawings, risk assessments, method statements, safe work procedures, operations, and maintenance manuals for all necessary works.
• To issue final specification/bill of materials for purchase order and negotiate with vendors and subcontractors to ensure budget and terms and conditions of purchases are met.
• Liaise with vendors and subcontractors to ensure timely delivery of goods, equipment, and fabricated items.
• Coordinate and supervise construction teams and subcontractors for the erection, testing and commissioning of installation of equipment to the required specification and quality.
• Liaise with consultants, owners, and relevant authorities on their engineering request.
• Plan and schedule work activities at sites in accordance to master program and ensure work is conducted in a timely and safe manner.
• Monitor project budget margin as set forth by the management.
• To ensure timely submission of project progress claim.
• Ad-hoc duties assigned by the Management from time to time.

Requirements:

• Candidate must possess at least Bachelor's Degree in Mechanical Engineering or any related field.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Possess keen knowledge of water and wastewater treatment technologies and the industry in general.
• Able to work independently and a multitasker/ able to cope in a fast-paced environment.

Please indicate your current and expected salary in your resume.

Job Description & Requirements

Roles & Responsibilities

Occupation

Administrative Assistant

Job Description & Requirements

Roles & Responsibilities

Responsibilities:

•Daily inbound/outbound order handling

•Verification of invoices from suppliers

•Preparation of supporting documents for billing to customers

•Preparation of salary for workers and staffs

•Maintening of petty cash and expenses

•Maintening of all MOM documents

•Communicate with customer on issue arise on order & inventory

•Weekly operation/KPI report data preparation

Requirements:

•Min 2 year admin experience

.knowelge of Timesoft software and Autocount.

•Proficient in using Microsoft Office (Excel, Powerpoint and Word)

•Willing to support overtime during peak period

Responsibilities:

• Perform and ensure that assembly builds and test are completed as scheduled and according to required specifications, drawings and work instruction.
• Report and assist Engineers in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.

Requirements :

• NITEC/ Diploma in Mechanical/ Mechatronics Engineering or its equivalent
• Applicants who do not possess the above will be considered on individual merits
• Able to comprehend schematic/ mechanical drawing, is an advantage
• Experience in Orbital Welding and/or Gas Tungsten Arc Welding (GTAW), is an advantage.
• Willing to work in cleanroom environment with shift system (12 hour shift - 8am to 8pm and vice versa)
• Entry level candidates are welcome