Primary Roles & Responsibilities

•  The patching cabling between network equipment and client’s network
•  The installation of power cables from equipment to power supply in rack/cabinet/closet
•  The installation, troubleshooting and de-installing IT equipment (Servers / Network / Storage / etc) Install/swap out devices (e.g., phone, computers, cables, boards, edge routers, switches and etc.)
•  Complete all hard and complex Move, Add Change (MAC) requests within the defined service levels
•  Act as interface between client’s associates and management
•  Provide hardware break-fix services for network infrastructure
•  Perform onsite call-through, data, voice, website and security testing
•  Perform back-up testing to ensure all systems are connected to the client’s network as directed
•  Support carrier testing of circuits
•  Assist with facilities efforts such as vendor co-ordination and vendor supervision - Power and uninterruptable
• power supply (UPS) restoral - Water problems, - Emergency cooling restoration, - Fire suppression exercises,
• restoration, and post fire events
•  Support inventory management activities - Receiving inventory, - Tagging of assets, - Tracking spares (crash
• kits), - Ordering inventory, - Updating inventory records, - Prepare and return damaged equipment
•  Act as an interface, as needed, between associates at the applicable location and centralized project / operations / MAC management

Requirements:

•  Must be proficient in utilizing technical tools such as BERT testers, cable testers, and fiber testers.
•  Requires experience in working in communications closets
•  Must be able to perform rack and stack activities
•  Must be able to safely lift heavy objects
•  Must understand cable patching processes and procedures in copper and fiber
•  Experience in either or both CommScope and Corning structured cables (copper and fiber)
•  Must have a basic knowledge of data communications networking.
•  Must be able to assist in troubleshooting issues
•  Must understand network terminology
•  Requires good interpersonal communications skills
•  Must be able to explain technical issues in a way the client will understand an issue
•  Must be able to interpret a client’s issue in a way that will allow technician to facilitate a resolution

Education/Experience Requirements :

•  5+ years of experience in Data Centre operations and environment
•  Must have a basic knowledge of local and wide area networking.
•  High school Diploma or equivalent required

- Tertiary education in Computer Science, Information Technology, or related field.
- At least 3 to 5 years of experience in administering Windows-based systems and infrastructure.
- Proficiency in Windows Server operating systems (2019).
- Strong understanding of Active Directory, Group Policy, DNS, and DHCP.
- Experience with virtualization platforms such as VMware and Hyper-V.
- Knowledge of scripting languages (e.g., PowerShell) for automation and scripting tasks.
- Familiarity with monitoring tools and systems management solutions.
- Excellent problem-solving and troubleshooting skills.
- Strong communication and interpersonal abilities.
- Certifications such as MCSE, MCSA, or equivalent are a plus.

• Plan, build and optimize infrastructure setup, design and performance.
• Manage backend information systems, including of virtual machines and virtualization platform, including of network storage, backup, Fibre channel switches.
• In-depth experience in Linux administration. Need to be expert level
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Design and propose a plan that will improve the hosting service of the Data Center

Our client is a well-established MNC. Due to their current expansion plan, they are looking for Control System Engineerto join their Engineering team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibility

• Support the design of control systems and programming, ensuring projects meet budget and timeline goals as outlined by the Project Manager.
• Revise control designs and documentation to align with the company Processes & Standards, as well as industry and customer URS requirements.
• Develop customized programs tailored to specific customer and project needs, following the company Coding Standards.
• Engage in control and validation tasks, including testing, debugging, internal approvals, FAT, and SAT.
• Collaborate with customers, Project Managers, Assistant Project Managers, Process Managers, Design Engineers, and other team members as needed.
• Work with suppliers when necessary and keep PCT and task completion records up to date.
• Any ad-hoc duty as given

Requirement

• Min diploma in engineering or related degree
• Min 3 - 5 years of experience
• Comfortable with regional travelling
• Knowledge in Siemens-S7 and Allen Bradley programming.
• Experience in SQL/Dbase Database, Project, Design and Manufacturing software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects

Responsible for software prototyping, requirements analysis, design, development, test, system integration and site integration for developed applications
Design, configuration, test, integration and maintenance of Automation & SCADA systems and applications
Provide technical, deployment and commissioning support to Project Teams and Customers
Maintain and enhance software applications in both functionality
Provide software support via on-site troubleshooting, testing and tuning of applications, software network, protocols and communication issues

Requirements:

Diploma/Degree in Electronics Engineering or Computer Science
Experienced with two or more languages such as C/C++, C#, Python
Experienced in at least one scripting language sch as Python, bash, ksh, bat, ps
Experience in real tome/embedded system
At least 2-3 years experience in C/C++ and at least 1 full SDLC
Knowledge/Experience with SCADA protocols, RDBMS, REST, MQTT are desired
Possess strong problem solving and troubleshooting skills
Eager and ready to pick up new skills
Team player with good written and spoken communication skills
Able to start work immediately is preferred

About the Company:

Our client is registered with the Building and Construction Authority (BCA) in the category General Building (CW-01) as Grade A1. It is also accredited to ISO 9001, 14001 and 45001 as well as various accolades such as;

• Built Environment Leadership Award (GOLD)
• Green & Gracious Builder Award (STAR)
• Workplace Safety and Health Award
• bizSAFE Partner Certificate

About the Role:

We are looking for a detail-oriented and proactive Planning Engineer to join company's team. In this role, you will drive the planning, scheduling, and reporting functions, ensuring seamless coordination with the construction team and subcontractors. Your insights and strategies will be crucial in managing project timelines and performance.

Key Responsibilities:

• Strategic Planning: Utilize Primavera P6 to track progress, manage time and cost entitlements, and develop comprehensive contract programmes and high-level summaries for presentations.
• Progress Monitoring: Keep a close eye on construction programme progress, identify delay events and their impacts, and assist in preparing Extension of Time (EOT) claims and client presentations.
• Reporting & Analysis: Create detailed progress reports, S-Curves, progress trackers, and conduct programming health checks to ensure project alignment.
• Recovery & Optimization: Develop recovery programmes and summarise key strategies to overcome challenges, including preparing baseline schedules with resource and cost loading.
• Collaboration: Work closely with the Senior Planning Engineer and Manager to refine strategies, analyze schedules, and maintain open communication channels.

Qualifications and Skills:

• Degree in Civil Engineering or equivalent.
• 3-5 years of experience in the Singapore construction industry, with a preference for high-rise commercial buildings, mixed developments, semiconductor factories, or healthcare projects.
• Hands-on experience with Primavera (1-2 years preferred).
• Strong team player with the ability to thrive in a fast-paced environment.
• Solid understanding of work execution related to methodology, timeframes, and productivity.
• Fresh graduates are encouraged to apply.

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

*We regret to inform that only shortlisted candidates will be informed.*

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

Job Description:

We seek an experienced and efficient site engineer for our construction department.

As a site engineer, you will monitor diversified aspects of construction project management. This will include planning, coordination and supervision of on-site activities. You will ensure all aspects of the project align with engineering and design specifications, industry standards and construction regulations. You will also foster effective communication by liaising with contractors, subcontractors and other project stakeholders.

Roles & Responsibilities:-

• Supervision on Piling works/Diaphragm walls
• Supervision on RC works/ ERSS
• Overall in charge and supervise construction work and earth work (By area)
• Assist in coordination of traffic and drain diversion
• supervise temp work
• Supervising and managing construction projects from start to finish, ensuring adherence to project plans and specifications.
• Analysing and interpreting engineering drawings, survey reports and other technical documentation to guide the construction process.
• Planning and overseeing allocating resources, materials and equipment to optimise project efficiency.
• Monitoring project costs, identifying cost-saving opportunities and adhering to budget constraints.
• Providing technical guidance and expertise to resolve construction-related challenges.

Required skills and qualifications

• A bachelor’s degree in civil engineering from an accredited university or college.
• 5-6 years of experience as a site engineer, civil engineer or an equivalent role.
• Demonstrated proficiency in managing and supervising construction projects.
• Experience with Microsoft Office Suite, GIS, AutoCAD and other software.
• Ability to manage multiple construction projects at various stages of their lifecycle.
• Strong knowledge of construction methods, materials and regulations.
• Competent in assessing, interpreting and presenting survey reports and other critical data for stakeholders and shareholders.
• Excellent project management and organisational skills.
• Strong problem-solving and decision-making abilities with effective communication.
• Ability to work effectively in a team and coordinate with multiple stakeholders.
• Attention to detail and a focus on delivering high-quality results.
• Well verse in earth and civil work
• Positive and responsible attitude

Preferred skills and qualifications

• Excellent interpersonal, leadership and management skills.
• Knowledge of sustainable construction practices.
• Understanding of budgeting and cost control.

Position Title: Sales Engineer
Location: Woodlands
Working Days: Mon - Fri, 5 days
Working Hours: 9am – 6.00pm
Salary: $2,400 + Comms

If interested, submit your resume and contact me here

Whatsapp +65 8854 1564 (Albert) | https://wa.me/6588541564

Yap Teck Huat Reg No: R24122623

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities & Duties :

• Service knowledge including pricing, cost and profitability, market acceptance, channel, and competitive dynamics.
• Offer technical support and expertise advice to customers
• Increase sales primarily through direct contact or/and new/existing channel partners.
• Regularly monitors and reports on Key Performance Indicators (KPIs).
• Other duties may be assigned.

Professional Qualifications

• Diploma mechanical/Chemical Engineering with field experience is preferred.
• 1 to 3years relevant experience in handling sales
• Proficient with Microsoft Office & One Drive.

RESPONSIBILITIES:

• Independently prepares detailed and optimized mechanical designs of high power electronics packaging and vacuum chambers.
• Own the design and documentation of sheet metal, injection-molded, and machined parts.
• Participates in a multi-disciplined design team and is active in supporting new platform development activities. Design team interaction with Asia locations and within the US.
• Makes mathematical calculations to determine dimensional and positional variation (tolerance stackups) for mechanical components.
• Engineering simulation experience, including thermal, structure, and fluid-flow.
• Experiment design and data acquisition, such as temperature measurements, stress/strain measurements.
• Takes into account solid material properties, behaviors, and failure modes of: polymers, metals, and ceramics.
• Design and carry-out experiments to assess component durability or performance.
• Interacts with manufacturers to produce manufacturable and cost efficient parts.
• Considers method of fabrication during the design process – including maching, grinding and forming – in order to produce a manufacturable, optimized design.
• Provide guidance to Mechanical Designers and Drafters.
• Participates in the manufacturing and re-work of prototype parts, including 3D printing.

REQUIREMENTS:

• Bachelor’s Degree in Mechanical Engineering or Materials Science
• Minimum of 5 years of related design experience.
• Advanced knowledge of Solid Works or other 3D modeling software.
• Must have a working knowledge of Geometric Dimensioning and Tolerancing per ANSI Y14.5.
• Experience in thermal analysis, hand calculations, and engineering simulation software. Ansys preferred.
• Experience with plasma processing and maufacturing, knowledge of materials, purity, cleanliness required for semiconductor wafer processing.
• Demonstrated experience with vacuum equipment as applied to plasma processing.
• Knowledge of materials science to design parts to withstand harsh plasma environments.
• Working knowledge of manufacturing process in metal machining, sheet metal, injection molding.
• Expertise in thermal instrumentation and experimental design validation.
• Prefer ability of scripting in Python or Matlab to support data acquisition and design simulation.
• Prefer experience in developing anodization for corrosive atmospheres.

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

CG Group is sourcing for local candidate to fill up the position of Gardener.

• Full time gardener with a passion for greenery.
• 5.5 days work per week
• Watering of plants, weeding, prune and removal of dried leaves, trimming of plants.
• Possess the attitude to learn, training provided.
• We welcome local elderly / middle / retiree to be part of our group.
• Selected candidate will be expecting full benefits after 3 months probation period.
• Work site: Sembawang
• Working hours:-
• Weekday: 9am to 6pm
• Saturday(s) 9am to 1pm
• Sunday(s), Public Holiday Off.

Interested parties, may send your resume at [email protected] or call us at +65 6268 8831. We look forward to your application soon.

Job Responsibilities:

• coordinate with SWC for the services routing and comply with COP
• coordinate with relevant agencies to ensure the design complying with code & standard
• Review all technical design drawings and calculations to meet client’s specifications and authority compliance.
• To support project sites for the design as and when required.
• To review shop drawings and coordination with various disciplines

Job Requirements

• Minimum 5 years of experience after tertiary education in relevant field in the construction supervision of civil and structural works for projects of similar scale and complexity.
• The Design Coordinator (Civil/Structural)’s role is to ensure that civil and structural works are built in accordance with approved Structural Plans, Architectural Drawings and cast-in SWCs services are provided as per CCSM and Structural Electrical Mechanical Drawings.
• Experience with LTA related project is preferable.

Key Responsibilities:

• Oversee installation, maintenance, and repair of marine equipment.
• Diagnose and resolve mechanical and electrical issues efficiently.
• Execute thorough testing and commissioning to ensure equipment meets performance standards.
• Prepare detailed service reports, including causes, measures, and spare parts used.
• Provide expert recommendations to the Superintendent and vessel crew on equipment operation and maintenance.
• Share insights for internal process enhancements based on service experiences.

Requirements:

• Degree in Marine Engineering, Mechanical/Electrical Engineering, or related field.
• Hands-on experience in marine equipment servicing and troubleshooting.
• Strong diagnostic abilities, clear communication, and technical proficiency.
• Offshore deployment

Interested candidates who wish to apply for the advertised position, please click on "Apply Now".

We regret to inform that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd

EA License No : 01C4394 | Goh JunHong | Reg No: R1872577

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Purpose

The AI Centre for Educational Technologies (AICET) is a research centre that is focused on developing technologies to improve learning. AICET collaborates with the Ministry of Education, Singapore and the National University of Singapore on various projects to build systems that provide immediate personalised feedback to the students, providing content that adapts to their performance, and improve assessment and grading efficiency and effectiveness.

The Software Engineer will be part of a team that will build next generation education platforms for the AI Centre for Educational Technologies. (AICET).

Job Description

To build software for the AI Centre for Education Technologies (AICET) under one of the AICET’s projects. Current projects include:

• Codaveri – An auto-feedback programming system
• Coursemology - a gamified e-learning platform
• Softmark – An online grading tool

The exact responsibilities and project assigned will be discussed with the successful candidate subject to suitability and also depending on AICET’s needs.

Qualifications

• A graduate or postgraduate degree in relevant discipline. Those with no experience are welcome to apply.
• Team player with excellent communication and interpersonal skills.
• Ability to build a collaborative working relationship with people at all levels.
• Familiarity with web development with modern tech stacks and technologies like Ruby on Rails, nodejs, Golang, React, and JavaScript/TypeScript.
• Experience with AI and/or EdTech platforms and system will be preferred.

Only shortlisted candidates will be notified.

We are an interior contracting A&A firm on the path of improvement and growth. We are inviting an experienced and self-motivated individual to join our fast expansion team as Senior Technical Sales Engineer (Construction Projects)

Responsibilities:

Business Development:

• Explore and identify business growth opportunities, implement and execute business development strategies related to engineering, construction projects and equipment.

• Work closely with the Business team in Japan headquarters

• Build and maintain technical relationships with clients.

Engineering & Construction:

• Supervise and plan site work, ensuring that targeted completion dates are met and works completed are within acceptable standard

• Resolve any technical issues and other challenges that may occur

Job Requirements:

• At least Bachelor’s degree in any relevant discipline

• Minimum 10 years and above of sales experience in medical/ healthcare sector, preferably with experience in Medical Devices

• Minimum 2 years of main contractor renovation site works experience

• Experience in maintenance of medical gas supply system

• Proficient in Microsoft Office applications and CAD, and familiar with Microsoft Project

• Good analytical skills and resourceful

• Good knowledge in site management methodology

• Team player, good interpersonal skills with ability to interact with people at different levels

• Willing to work flexible time when necessary

• Fluent oral and written skills in Japanese is essential

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Develop and implement new optic / illumination components/system
• Resolve optical / illumination issues.
• Identify necessary and desirable improvements of vision optical system performance.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Test Engineering Services (TES) at Synapxe is embarking on a journey to constantly transform its services by exploiting state-of-the-art technologies and tools to enhance TES’ ability to offer specialized testing services to its stakeholders. TES is passionate about making an impact with lasting change and we aim to provide our stakeholders with automated and optimized testing solutions to not only help them speed-up testing but produce accurate, reliable, and repeatable results.

TES is planning to implement and roll out a Dynamic/Interactive Application Security Testing (D/IAST) solution. This will act as a control measure proposed for implementation in response to Secured-by-Design Framework v1.0 as recommended by CSA’s Cybersecurity Code of Practice (CCoP).

As an Application Security Testing Specialist, you will be responsible for:
• Leading the request for proposal from a technical perspective to procure a D/IAST solution.
• Defining and documenting technical product requirements and specifications for a D/IAST solutions, evaluating the solution proposals to perform fit/gap analysis, determining the detailed evaluation criteria and producing recommendations to prevent, detect and analyse security threats and weaknesses in the running application.
• Leading the implementation and roll out of the identified D/IAST solution; work with the senior manager and product vendor to plan, set-up, on-board, test and deploy the D/IAST solution.
• Automated application security using the D/IAST tool to perform application security testing, gather and understand reports, assess potential security vulnerabilities, work closely with the application developers/vendors to resolve any vulnerabilities, and present the risks to the business for acceptance or mitigation.
• Removing false positives from the reports and working closely with the development/test teams to automate test and embed security testing in the CI/CD pipe line.
• Developing comprehensive and accurate reports and presentations for both technical and management audiences and effectively communicating the findings and remediation strategies.
• Recognising and safely utilising attacker tools, tactics, and procedures
• Maintaining and performing routine maintenance on D/IAST monitoring servers, reports repository, agents, etc.

• 8 years of experience with SAST/DAST/IAST/RASP methodologies and technologies to catch security flaws in the software?
• Hands-on experience with a wide-range of security tools such as MF Fortify, WebInspect, Contrast Security Assess and Protect, IBM AppScan, Checkmarx, MS Threat Modeling, BurpSuite, etc.
• Eager to collectively learn, share and solve problems within the area of application security testing in the area of healthcare domain?
• Consistent attention to details and work under pressure to achieve agreed targets/goals
• Work with intra-teams, and building rapport with the stakeholders and be able to manage difficult people
• Think out of the box and carries the courage to try and implement unconventional approach to deliver solutions

JOB SCOPE

• Assist the manager in managing the iSeries Product and Operation Services.
• Manage the iSeries operations activities to meet the OLA/SLA.
• Develop and update of Standard Operational Procedure, Operation Procedures.
• Provide iSeries support to both IT and business user.
• Manage and escalate system operation and application issues timely to management.
• Ensure all System Backup activities are completed successfully.
• Ensure System Disaster recovery readiness and successful execution of DR testing.
• Manage the High Availability iSeries System environment.
• Pro-active monitoring and maintenance of multiple iSeries servers and applications.
• Manage the Risk and Security & Vulnerability remediation for iSeries in compliance to the security best practices.
• Manage third party software, ensure they are updated according to the support lifecycle.
• Responsible for Firmware and OS upgrades, Performance Tuning, Capacity Planning, PTF installation.
• Work with multiple vendors on the implementation of iSeries support, lifecycle upgrade and project.

JOB REQUIREMENTS

EDUCATION

• Degree in Information Technology / Services related curriculum preferred
• Additional experience may be substituted in lieu of a degree

CERTIFICATION

• Formal IBM iSeries training and/or IBM certification preferred
• Formal training and certification in System Management, e.g. ITIL foundation

REQUIRED EXPERIENCE

• Minimum 10+ years hands-on experience in an iSeries environment
• Experience in managing iSeries AS400 operations.
• Experience in ITIL and processes in Service Request, Incident, problem and change management.
• Experience of one or more of the following:
• Remote Journaling / High Availability concept.
• Backup and Recovery on Flashcopy, BRMS, Safe Guarded Copy, NIM for VIOS backup.
• Security management in iSeries System and Application, user profiles, object authorities, system values .
• IBM i OS V7R3, V7R5, IBM VIOS Virtual Machine Environment.
• IBM PowerHA, ASP & iASP Disk configuration and administration.
• IBM EIM implementation for Single Sign on.
• 1 or more system replication software – e.g. iTera, Assured Mimix.
• Network configuration for TCP/IP protocol, Route and Host Tables, Firewall Rules.
• IBM SAN storage and SAN Switches, FC multipath configuration.
• System performance tuning, performance, and alert monitoring.
• Firmware, Patch, PTF, CUM Package ordering/installation.
• Query/400 – SQL/400, DB2 and performance tuning.
• Third party software, e.g. iTera, Assured Mimix, Optimizer, Fortra Powertech Exit Point, Authority broker, compliant monitor, Antivirus, System monitoring tool.
• Working knowledge on ACSC and Infinium advantages.

REQUIRED KNOWLEDGE

• IT processes, policies and procedures.
• Hand on experience and knowledge of iSeries application structure, operating system, installation specifications, troubleshooting, problem determination and data restoration techniques.
• Knowledge of and experience in personal computers and Microsoft products.
• Mature and strong leadership skill to lead both technical and service operation management.
• Enthusiastic and a strong desire to learn, quick leaner to adopt to fast changing environment.
• Organized and detail oriented. Ability to apply knowledge into practical support, identified and resolve potential pitfall upfront to avoid costly rework and service impact.
• Strong ability in handling multiple tasks stream, ability to priority critical / important task.
• Ability to perform troubleshooting with multiple technical team.
• Must be able to meet the attendance guidelines of the job and adhere to departmental and company policies.
• Possess excellent communication skills; able to read, write and speak English.
• Must be willing and available to work on remote standby duty including occasional weekends when required.

Marina Bay Sands is committed to building a diverse, equitable and inclusive workforce, providing equal opportunities as we grow our talent base to match our growth ambitions in Singapore. Our employees are committed to adhere to and abide by all rules, regulations, policies and procedures, including the rules of conduct and business ethics of the Company.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description:

We are seeking a skilled and experienced Welding Engineer to join our team in Singapore, specializing in structural works within the construction industry. The ideal candidate will have a strong background in welding technologies and processes, with a particular emphasis on structural steel fabrication and erection. As a Welding Engineer, you will play a critical role in ensuring the integrity, quality, and safety of our welding operations on various construction projects.

Key Responsibilities:

Welding Process Management: Develop, implement, and oversee welding procedures for structural steel projects, ensuring compliance with industry standards and project specifications.

Quality Control: Monitor and inspect welding activities to ensure high-quality workmanship and adherence to safety standards. Conduct non-destructive testing (NDT) and other quality assurance measures as required.

Technical Support: Provide technical guidance and support to welding teams, including troubleshooting welding issues and optimizing welding processes for efficiency and quality.

Project Coordination: Collaborate with project managers, structural engineers, and other stakeholders to ensure welding operations align with project timelines and requirements.

Training & Certification: Train and certify welders to ensure they meet the required skill levels and adhere to safety regulations. Conduct regular assessments to maintain high standards of welding performance.

Documentation: Maintain accurate records of welding procedures, inspections, and certifications. Prepare and submit reports as needed to project managers and clients.

Safety Compliance: Ensure all welding operations comply with Singapore's workplace safety regulations and company safety policies.

Requirements:

Educational Background: Bachelor’s degree in Welding Engineering, Mechanical Engineering, or a related field.

Experience: Minimum of 5 years of experience in welding engineering, with a focus on structural steel works in the construction industry.

Certifications: AWS (American Welding Society) or CSWIP (Certification Scheme for Welding and Inspection Personnel) certification is highly preferred.

Technical Skills: Proficient in welding techniques, including SMAW, GTAW, GMAW, and FCAW. Familiarity with welding codes and standards such as AWS D1.1.

Software Proficiency: Experience with welding simulation software and CAD software for structural steel design is an advantage.

Communication: Strong communication skills with the ability to work effectively in a team environment and interface with clients and other stakeholders.

Attention to Detail: High attention to detail and a strong commitment to quality and safety in welding operations.

Application Process:

We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3-5 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

UDYOGAH PTE LTD | 20C0055 | Arasu R1102109

Job Purpose:

Develop Full Stack Web Applications for our medical devices, and be part of the team in the designing,

engineering, and development of our pipeline of medical devices.

Applicant should be an experienced, creative and passionate web developer who wants to be make a

significant contribution to the healthcare & water sector.

Job Duties:

• Develop Full stack web applications.

• Carry out requirement gathering, design, implementation, integration, testing, verification,

user acceptance and maintenance of Renew Group’s software products.

• Continual improvement of software management process.

• Troubleshooting, document, upgrade and develop maintenance procedures.

• Any other duties as and when assigned by immediate superior for Renew’s medical device

products.

Qualifications:

• Bachelor’s Degree in computer engineering/Computer Science or related discipline.

• 5 – 8 years’ relevant working experience in software development.

• AWS Certification is preferred.

Skills:

• At least 2-year experience in Node.js Framework, e.g., express, meteor or UI framework, e.g.,

react, angular or others, e.g., Kotlin.

• Must have completed at least 2 full Software Development Life Cycle (SDLC).

• Used at least 2 different DB from NoSQL and RDBMS (Relational Database Management

System).

• Have prior experience in design and architecture.

• Have prior experience in building microservices.

• Have prior experience in Software Testing (unit-testing, performance testing).

• Strong communication and interpersonal skills with the ability to build excellent personal

relationships at all levels; both internal and external.

• Bonus for prior experience in caching and scaling.

• Bonus for prior experience with Data Engineering, e.g., ETL (Extract, Transform and Load).

• Bonus for prior experience with docker and terraform.

• Bonus for prior experience with AWS technologies.

• Self-motivated, independent, analytical, with strong presentation skills.

• Meticulous with strong analytical skills and systematic approach to problem-solving.

• Good Team-player.

• Positive ‘Can-Do’ attitude, self-motivated and able to work independently.

JOB DESCRIPTION

REC-RGPL-ADMQP01-03 Rev 01

Important Notes:

1. Must Have:

✓ Backend Development (NodeJS, Python…)

2. Preferred:

✓ UI/UX (Adobe Photoshop, Figma…)

✓ FrontEnd (React JS, Flutter…)

✓ AWS (EC2, Route53, EBS, EFS ….)

3. Good to Have

✓ Unit testing (mocha…)

The information contained herein is not intended to be an all-inclusive list of the duties and

responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities

required to do the job. The Management may, at its discretion, assign or reassign duties and

responsibilities to this job at any time.

The duties and responsibilities in this job description may be subject to change at any time due to

reasonable accommodation or other reasons

Job Purpose:

Develop Full Stack Web Applications for our medical devices, and be part of the team in the designing,

engineering, and development of our pipeline of medical devices.

Applicant should be an experienced, creative and passionate web developer who wants to be make a

significant contribution to the healthcare & water sector.

Job Duties:

• Develop Full stack web applications.

• Carry out requirement gathering, design, implementation, integration, testing, verification,

user acceptance and maintenance of Renew Group’s software products.

• Continual improvement of software management process.

• Troubleshooting, document, upgrade and develop maintenance procedures.

• Any other duties as and when assigned by immediate superior for Renew’s medical device

products.

Qualifications:

• Bachelor’s Degree in computer engineering/Computer Science or related discipline.

• 2 – 3 years’ relevant working experience in software development.

Skills:

• At least 1-year experience in Node.js Framework, e.g., express, meteor or UI framework, e.g.,

react, angular.

• Must have completed at least 1 full Software Development Life Cycle (SDLC).

• Used at least 2 different DB from NoSQL and RDBMS (Relational Database Management

System).

• Strong communication and interpersonal skills with the ability to build excellent personal

relationships at all levels; both internal and external.

• Bonus for prior experience with docker and terraform.

• Bonus for knowledge of HTML, CSS, and JavaScript.

• Bonus for in experience in data engineering, e.g., ETL (Extract, Transform and Load).

• Bonus for experience in Software Testing (unit-testing, performance testing)

• Self-motivated, independent, analytical, with strong presentation skills.

• Meticulous with strong analytical skills and systematic approach to problem-solving.

• Good Team-player.

• Positive ‘Can-Do’ attitude, self-motivated and able to work independently.

JOB DESCRIPTION

REC-RGPL-ADMQP01-03 Rev 01

Important Notes:

1. Must Have:

✓ Backend Development (NodeJS, Python…)

2. Preferred:

✓ Frontend (React, Python…)

3. Good to Have

✓ Unit testing (mocha…)

✓ UI/UX (Adobe Photoshop, Figma…)

The information contained herein is not intended to be an all-inclusive list of the duties and

responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities

required to do the job. The Management may, at its discretion, assign or reassign duties and

responsibilities to this job at any time

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule