We are seeking Operation Executive to join our team at Changi Airfreight Centre. As a Operation Executive, you will play a key role in operational activities to enhance brand awareness and drive business growth. Identify areas for continous improvement and work with peers as a team to ensure smooth operations.

Able to communicate with Chinese and English speaking customers

Requirements

• Possess Diploma or equivalent level of certification in any engineering disciplines
• Problem solving skills
• Experience in negotiating with suppliers, sourcing new suppliers
• Experience in commodity strategy and management for pcba, cables, labels, and OEM.
• Experience in New Product Introduction
• Quote analysis

Responsibilities

• Develop preferred suppliers for cost, capacity, quality and response to RFQ
• Drive cost reduction for respective commodities through supply base consolidation and negotiation
• Create and drive contract with key suppliers
• Drive materials lead-time reduction to meet with Customers’ expectations
• Supplier ramp up plan and highlight any potential supply chain challenges in a timely manner
• Coordinate and communicate new project Engineering Change Order implementation effectively to avoid/minimize any E&O exposure
• Provide technical support/advice to buyers, suppliers as well as customers
• Follow up on new vendor set-up and supply price is set-up LN systems before order placement by buyer
• Cost, lead-time, MOQ & NRE analysis on suppliers’ quotation. Make supplier recommendation to quote team
• End-of-Life management
• New Supplier survey & auditSource and recommend suppliers for business need.

Kindly indicate your current and expected salary in the resume, thank you.

Responsibilities

• Responsible to examine and evaluate module parts against airworthiness standards and defined requirements
• Carry out inspections of aircraft engine parts, accessories, modules using appropriate tools, equipment, materials and methods
• Identify and apply inspection engineering techniques, methods, standards, data analysis, lifecycle principles and equipment risk-based monitoring techniques to support inspection
• Interpret inspection engineering techniques, methods, standards, data analysis, life-cycle principles and equipment risk-based monitoring techniques so as to conduct inspection engineering
• Perform visual and dimensional inspections and identify defects and types of repair required
• Perform in-process inspections to ensure good physical condition and accurate dimensions
• Report discrepancies found in performing inspections to appropriate persons
• Document all inspection procedures and findings
• Identify appropriate resources and conduct final inspections on engine components and parts for completion of work done in accordance with technical manuals and organisational procedures
• Conduct final inspections on engine components and parts to ensure repairs done in accordance with requirements
• Verify compatibility of components and modification status

Requirements

• Relevant Engineering or Aerospace Certificate
• 2 to 5 years’ experience in aero engine component visual and dimensional inspection
• Work experience in identifying and interpreting potential defects that impact quality or safety against set standards
• Proficiency in the use of measuring instruments, e.g. vernier callipers, micrometre, gauges

Successful candidates can look forward to working in the forefront of next generation factory with exciting new opportunities to work on innovative repairs for next generation aero gas turbine engines with state of the art automation and digital platform

Responsibilities

• To support assessment of inspect-ability of features on CMM machine, develop CMM programs and instruct CMM measurement method through setup plans to CMM inspectors
• To support CMM Measurement System Analysis (MSA) study to RM13003 requirements and perform CMM inspection of repaired components for FAIR Form 3 documentation
• Work with Manufacturing Engineers and Inspectors to troubleshoot and interpret CMM measurement results.
• Work with Manufacturing Engineers to document measurements and hence condition of components for reporting to OEM or for documentation of acceptance.
• Work with Development Engineers to introduce new process, product and capabilities
• Advise Engineers on design of tooling/fixtures/inspection gages required for CMM inspection on new and existing product.
• To support in automation of inspection process on CMM machine.
• Work with Engineers in automation and digitization Projects with OEM (Rolls Royce) and Research Institute (including but not limited to ARTC) to bring new technology into production
• To Support production in TV request measurement
• Other duties as assigned by Supervisor

Requirements

• Degree in Manufacturing / Mechanical/ Precision Engineering or similar field
• Familiarity with GD&T, PC-DMIS &/or MCOSMOS for CMM programming
• Working knowledge of drafting standards (), symbols, and nomenclature; functional knowledge of material masters and parts lists/BOM
• Good problem-solving skills, takes ownership and hands-on approach
• Problem Solver with strong communication skills
• Interest in manufacturing and programming
• At least 2 years’ experience with CMM programming or similar capacity/ Fresh Graduates and experienced engineers (from non-aviation industry) are welcome too

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

Accounts Payables (AP) Invoice Processing:

• Verify and match AP invoices with purchase orders, delivery orders and goods receipt in SAP system
• Communicate and liaison with internal departments and /or external vendors on invoice related matters
• Input the matched invoices into SAP system for payment processing
• Review vendors’ statement of accounts

Others:

• Scanning and archiving of documents
• Assist in monthly stocktake count (on rotation basis)
• Assist in compiling import permit data for monthly GST reporting

Requirements

• Minimum Diploma or equivalent
• Prior relevant AP experience in invoice or payment processing will be an advantage
• Experience in SAP preferred
• High degree of accuracy, attention to detail • Good team player

Essential Responsibilities:

• Manage component repair team manpower, scope, budget, and technical execution across a variety of product lines with a focus on developing repairs, reviewing RSS/PCN packages, and dispositioning departure records
• Accountable for monitoring and communicating repair project status, business issues, and significant developments as appropriate within and outside the cross-functional team
• Work collaboratively with design, product support and other engineering teams along with shop productivity leaders to formulate technical solutions and strategies that align with short and long term business objectives
• Lead or support root cause/corrective action efforts in response to development and on-going process learnings
• Assure proper documentation of technical data generated for the team’s assigned projects and/or tasks consistent with Engineering, Quality and Services policies
• Lead and facilitate regular communication of technical and business information between organizations, within the work group and with senior business leaders.
• Ensure company compliance initiatives and training requirements are implemented within the sections.
• Conduct performance appraisals and participate in salary planning
• Promote professional growth through timely performance feedback and coaching
• Apply Lean principles for team operations and continuous improvement efforts
• In this role, you will gain or build: systems thinking and people leadership skills through the broader integration of design, materials science, manufacturing, and quality while delivering current and future repair technologies and business strategies

Qualifications/ Requirements:

• 10 years of experience in a design, product support or repair engineering role or in Aerospace Products
• Minimum Degree in engineering field from an accredited college or university
• Knowledge of FAA/ EASA regulation for repair Engineering
• Experience integrating engineering with shop business and technical objectives

Desired Characteristics:

• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry.

Responsibilities

• Coordinate and Plan Engineering Resources to support operations on day-to-day matters including technical enquiry, engine testing troubleshooting and out of scope repair instructions development.
• Manage engine investigation and teardown review including preparation of relevant reports.
• Perform engine performance and parts analysis to improve engine build standards.
• Review Customer’s requirements and recommend engine work scope to optimize engine on-wing life.
• Perform engine parts inspection and scrap parts review.
• Review and implement recommendations of Technical Publications (e.g. SBs, TSB, SCETI, Action Items etc).
• Communicate with home office Service Center Engineering (Montreal) for technical advice and instructions.
• Spearhead initiatives in reducing cost of poor quality/ test reject and share best practices within the network.
• Lead in Quality Improvements Activities (e.g. ACE, CAR & RRCA).
• Provide technical assistance to operation on high technical intensity/ complex shop equipment i.e. CMM.
• Leading and support process and product improvement projects.
• Responsible for identifying and maintaining a safe workplace.

Requirements

• Degree in Aerospace or Mechanical Engineering or equivalent.
• Possess 3 to 5 years of technical experience with strong understanding of Aerospace Maintenance, Repair and Overhaul business.
• Experienced in leading aero-engine troubleshooting and investigation is preferred.
• Strong customer focused and analytical skills for problem solving,
• Strong team player who is self-motivated and pro-active,
• Possess a good track record in continuous improvement project,
• Excellent written & verbal communication and presentation skills.

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together”.

Responsibilities:

• Support global NPI (New Product Introduction) on product design and development.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-off and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.
• Overseas travelling may be required.

Requirements:

• Min. Diploma in Mechanical or Mechatronics Engineering.
• Proficient in using Solidworks software.
• Preferably with working knowledge and experience in taping machine, laser mark, jig & fixtures design.
• Positive attitude and self-motivated.

Core Responsibilities:

• To perform quality assurance functions with regard to the product (jet engine components), process and maintain quality management system while ensuring compliance with all related government agencies, aviation authorities and customers’ requirements and regulations.
• Establish quality procedures and quality control instructions.
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality.
• Perform internal audits to evaluate quality system, products and processes (ISO9001 / AS9100 / NADCAP).
• Perform vendors’ and on-site audits as required.
• Uphold customers’ and regulatory authorities’ requirements.
• To carry-out other QA functions as required.

Qualifications:

• At least 2-3 years’ of relevant experience in Aerospace QA environment.
• Good analytical, communication and interpersonal skills.
• Meticulous attention to details, able to multi-task and commit to job.
• Familiar with ISO9001 / AS9100 Quality Management System requirements.
• Experience in using problem-solving tools including fishbone diagrams, FMEA and 5-whys methodology.
• Able to interact effectively with other functional departments such as Engineering and Production to resolve issues relating to products and processes.
• Familiarity with audit covering special processes including heat treatment, plasma coating, NDT would be a plus
• Experience in metallurgical laboratory evaluations would be advantageous

Education Requirements:

• Degree / Diploma in Mechanical / Aeronautical Engineering

Job responsibilities

• Based on the technical specifications of the products provided by the customers or by the internal teams, carry out the CAD drawings of all the products families (smartcards, antennas, IC substrates, medical, IOT):

1. With 1 or 2 copper layers or with multi-layers of copper
2. Under Autocad and Gerber environment

• According to the internal best practices for compatibility with internal process and cost optimization
• Carry out the drawing of the toolings for the local manufacturing of the new prototypes or for the local manufacturing of the first production lots of the new products
• Prepare the drawings for the punching tool and the artworks
• Interface with the toolings suppliers
• Inform the internal teams about the launching of the toolings (especially incoming inspection)
• Follow-up of the suppliers leadtime for the delivery of the toolings
• Update Technical information in Linxens data base
• Cross check design of other drafters
• Suggest adjustments designs taking into account the customer's specifications and internal rules of manufacturing
• Liaise with counterparts of Drafter team on other plant for cross sharing information and back up activity
• Understand plating software simulation tool to better design smartcard products / Understand RF software simulation tool to better design antennas

Job requirements

• Diploma in Mechanical Engineering or equivalent
• Knowledge of at least one CAD tool (Autocad mandatory, Gerber, Altium)
• Good knowledge in mechanical
• Basic knowledge in PCB (printed circuit board) or FPC (flexible printed circuit) manufacturing process
• Analysis skills
• Good communication skills
• Team player
• Accuracy, Rigorous & methodical
• Patience
• Customer oriented

We are hiring Architectural base designer who will be trained to be specialised in field of signage, environemntal graphics.

Our wide array of construction projects includes residential, showflat, institutions and sports facilities etc..

You will be task to produce drawings & design development with clients.

After which, approved drawings will be fabricated in-house.

Job Requirements

1. Proficient in adobe illustrator and/or other graphics related software.

2. Work closely with clients for artwork changes and revisions till approval for production.

3. To liase with production manager for technicalities and workshop discussion.

4. With knowledge in architectural, Mechanical, Industrial design is advantage.

Job Responsibilities

1. Coordinate all drawings and replys thru phone or emails for drawing revision till approval for production.

2. To assist and support sales & project teams for successful completion of works.

Interested applicants, please whatsapp 90097956 or email CV to apply.

Position is available immediate.

Job:

• Review, analyze and transform new business/user requirements into IT system/functional requirement.
• Lead SAP and EDI project implementation and handover to IT helpdesk.
• Serve as point of contact for internal/external business users.
• Manage 3rd party vendor for outsourced projects.
• Develop and review systems specifications, test plans, test results, technical documentation, and lead computer system validation (CSV) exercise according to corporate standards and guidelines.
• Ensure the solution delivered is properly tested and meet specifications and timeline from development to deployment. Support unit testing, SIT, UAT effort and resolve technical issues when required.
• Providing technical support, good services and timely response to clients and internal users, including preparation of user manual and conduct training.
• Improve the productivity of existing processes with IT systems.
• Internal and external audit handling.

Requirements:

• Bachelor’s degree in computer science/information technology or equivalent.
• Possess at least 3 years’ experience in SAP and EDI system implementation and support role.
• Preferably worked in 3PL, Supply Chain, Logistics or service environment before.
• At least 3 years’ experience in IT project implementation, direct interaction with clients/customers, business users etc.
• Well verse with SQL commands.

Job Description:

• Liaise with Users and Vendors for Procurement related activities.
• Solicit best bids in accordance with the company’s standard procurement policies and procedures.
• Address clearly the agreed specification requirements, terms and conditions to Vendors.
• Assist Procurement Manager to prepare and conduct bids evaluation analysis.
• Organize technical and commercial clarification meetings with vendor if required.
• Expedite for vendors’ quotations and users’ decision in accordance to agreed timeline.
• Assist Procurement Manager to prepare procurement related documents.
• Manage proper e-filing of Procurement related documents.
• Assist to archive hardcopy of old RFQ documents and organise vendors’ samples.

Requirements:

• Preferably Diploma/Degree Holders.
• Meticulous with strong emphasis on accuracy and detail.
• Able to multi-task and able to work independently.
• Good interpersonal and communication skills.
• Good time management and organizational skills.
• Self-starter, passion to develop a career in Procurement.
• Proficient with MS Office software and other relevant applications.
• Willing to work during events day for assigned event duties.
• Office is located at Changi Airport Terminal 2.

Interested applicants, please send in your resume to [email protected]

Bubble Tea Store in Upper Changi North Area

Basic Salary - $1500

8hrs (OT Avail subject to business needs). 5.5 days work week (off on weekdays)

- Female only

- Serve and recommend drinks to customers

- handle cashiering, suggestive selling

- follow SOP, maintain shop cleanliness

- adhere to Food and Safety Procedures

- excellent customer service skills and a positive attitude

- good communication and interpersonal skills

- able to work in a fast- paced environment

- must be able to multi-tasks

- have attention to details and the abilities to maintain a clean and organized workspace

- ability to commit a 6 day work week which includes evenings, weekends and public holidays