Tan Eng Huat Motor

Hougang, North-East Region

Technicians (Trades & Services)

Full time

$2,200 – $2,800 per month

Job Requirement

- Minimum 2 years of working experience in related field

- Keen learner

- Team player, work well with team

- Preferably to have a driving license

Job scope

-Troubleshooting, including hands-on, computer diagnostic for most common commercial vehicles

- Perform troubleshooting, repair and maintenance work for commercial vehicles and

-Able to perform and run vehicle diagnostic, including programming

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 5 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 5 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description：

The Access & Identity Management (AIM) team is a critical component of Global Information Security and is responsible for controlling and maintaining secure access across the technology estate. The team ensures that all users have appropriate access to technology systems and resources within the Firm.

The AIM administrator is responsible for user administration functions across all technology platforms and applications, including:

• Managing user accounts, permissions and entitlements in Microsoft Active Directory, Exchange, UNIX, Cloud (Microsoft Azure, AWS, GCP), 350+ business applications and client’s state-of-the-art trading and asset management platform.
• Maintaining appropriate user entitlements throughout the employee lifecycle (Joiners/Movers/Leavers).
• Project work relating to system migrations and onboarding new systems to AIM management.

Requirement：

• Experience performing user administration in a Windows Active Directory environment, and a Microsoft Azure Entra ID.
• Experience in granting NTFS permissions for folders/files in a Windows Distributed File System Environment.
• Experience performing user administration tasks for various in-house and third-party applications.
• Experience in Exchange administration Exchange Admin Center (both ECP, EAC): creating and maintaining mailboxes, distribution lists, contacts and public folders.
• Knowledge of enterprise-level Identity Management systems (e.g. SailPoint IdentityIQ, Okta).
• Experience administering 2FA remote access solutions (e.g RSA, Duo, etc)
• Knowledge of Information Security principles and ability to adhere to SSAE16 and SOX audit requirements pertaining to Identity & Access Management (Role-Based Access Control, access governance, detail-oriented, obtaining and documenting approvals, etc).
• Experience with ticketing/workflow management tools (e.g. ServiceNow, JIRA).
• Basic familiarity with UNIX command-line execution.
• Basic familiarity with PowerShell command in both Office 365 and on-prem Exchange.
• Strong written and verbal communication skills.
• Commitment to excellence and high standards; strong organizational skills; able to manage time, priorities and workload; provide documentation and accountability.
• Work independently and proactively.
• Working hours - No issue with early shift (8am SGT, occasionally 7am), and holiday season coverage

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Oracle Cloud Infrastructure (OCI) has been the platform of choice for running AI-Generative AI workloads (LLM Development, model training/fine tuning and inferencing) at scale. Cutting-edge companies doing LLM development such as Mosaic ML, Adept AI, Cohere plus 30 other AI development companies have signed contracts to purchase more than $14 billion of capacity in Oracle's Gen2 Cloud (OCI). NVDIA themselves are using OCI’s RDMA cluster networking technology for their AI infrastructure. To drive market success of this offering, we are investing in building a team of highly motivated & talented individuals across Asia Pacific.

About the job

We are looking for an AI-Generative AI Solutions Architect who will be a Subject Matter Expert (SME) and thought leader to help customers in designing solutions that leverage our Generative AI services and GenAI infrastructure. You will interact with customers directly to understand their business problem, and guide them in implementation of generative AI solutions, delivering briefing and deep dive sessions, and advise them on adoption patterns and paths for generative AI.

As part of the Customer Strategy and Specialist AI JAPAC Team, you will work closely and support the OCI Cloud sales and engineering teams in incubating, piloting, and deploying OCI Generative AI Service and Generative AI infrastructure, with enterprises, AI Labs and AI startups. You will develop reference architectures, use cases implementations, white papers, blogs, and presentations to enable customers and partners to fully leverage Generative AI services and infrastructure on OCI.

You must have practical technical experience working with technologies related to large language models including LLM architectures, model evaluation, and fine-tuning techniques. You should be proficient with design, deployment, and evaluation of LLM-powered agents, RAG techniques and GenAI. You should understand the security and compliance requirements for ML/GenAI implementations. A good understanding the Startups, Digital Native and DevOps eco-system would be a plus.

Key responsibilities

• Demonstrate how OCI Cloud is differentiated by working with customers, demonstrating features, tuning models, optimizing model performance, profiling, and benchmarking.
• Build repeatable technical assets such as workshops, scripts, reference architectures to facilitate adoption of OCI AI-GenAI portfolio
• Architect end-to-end GenAI solutions with a focus on LLMs and RAG workflows.
• Evangelize OCI GenAI services and share best practices through medium including events/public forums, blogs, white papers, reference architectures, …
• Mentor and enable OCI field Cloud Engineers on GenAI solutions to scale awareness and adoption thru PoCs, workshops, customer, partner enablement
• Travel as needed.

Qualifications

• Minimum of 10 years of experience in software engineering, cloud engineering, modern data platforms, systems architecture, design, and implementation.
• Knowledge and experience with AI and GenAI platforms, solutions, specialized infrastructure, LLM design and use cases.
• Proven experience in designing and implementing solutions, including experience with relevant tools and technologies. Excellent analytical and problem-solving skills, with the ability to identify and resolve complex technical issues related to AI, ML, and GenAI applications.
• Proficiency in programming languages (e.g., Java, Python) and databases (e.g., Oracle, MySQL), developing and executing AI over any of the cloud data platforms, associated data stores, Graph Stores, Vector Stores and pipelines.
• Knowledge of GPU cluster architecture and the ability to leverage parallel processing for accelerated model training and inference.
• Excellent communication and collaboration skills with the ability to articulate complex technical concepts to both technical and non-technical stakeholders.
• Experience delivering/leading workshops, training sessions, and presenting technical solutions to diverse audiences.

Job and Responsibilities:

Managing IT infrastructure (including network and cybersecurity solutions), servers (including VM), Cloud infrastructure and backup solutions (on-premises and cloud)

Provide technical support, maintenance, and troubleshooting for user systems, including user PC, Retail POS and peripherals, printers (including barcode printers), electronic shelf labels, digital signage, mobile phones and tablets etc.

Troubleshoot and resolve complex technical issues related to M365, including email, SharePoint, OneDrive, Teams, and other O365 applications.

To assist with procurement and maintain up to date inventory tracking

Liaising with various external vendor solution providers

Assist in implementing IT policies, protocols, procedures, solutions, and best practices including incident reporting on containment and remediation.

Be part of project management team on IT initiatives (including system updates, tech refresh and migrations) sourcing of solutions, evaluation of solutions, managing implementation process including UAT, user training and system documentation.

Assist to conduct regular system audits, regular checks on network and data security and testing to detect issues within the IT systems.

Skill Requirement & Qualification:

Minimum Diploma/Degree in Computer Science or related field.

Proven experience in system design, implementation, and administration of Microsoft Windows technologies: Windows Servers 2012 and above, Active Directory, LINUX, Router, and Network Switches.

Experience with Servers Backup and maintenance.

Proven experience as a System Infrastructure Engineer or similar role with 3-5years experience, with a focus on Microsoft O365 technologies.

Good experience managing and troubleshooting firewalls and network technologies (e.g., switching, routing, VPNs).

Working experience with Remote Desktop Services and hybrid cloud environments

Dance Instructor Job Description

We are looking to hire a passionate Bharatanatyam Dance instructor to join our traditional school. You will be responsible for teaching and training a dynamic group of students in a range of techniques and classical dance styles, ensuring that all students are engaged, motivated, and inspired to achieve their goals in their chosen area of dance. If you love to dance and enjoy working with people of all ages, we encourage you to apply. Proven experience as a dance instructor in the specific discipline/s of Bharatanatyam Syllabus is strongly desired.

Responsibilities:

• Ability to teach using Bharatanatyam dance and methodologies from beginner to advanced level.
• Develop curriculums and prepare lesson plans based on the School Syllabus.
• Ability to communicate with a diverse group of teachers and students.
• Engage, encourage, and motivate students to reach their goals.
• Evaluate student performance and make recommendations for improvement.
• Provide fun and creative environment.

Requirements:

• Experience in Bharatanatyam Dance Teaching
• Bachelor's Degree in Dance or qualification from an accredited college.
• Previous teaching experience required.
• Good communication skills.
• Energetic, driven, creative, and dependable.
• Demonstrate patience and leadership skills.

Job Description

• Massage customers and administers other body treatments in accordance with Spa standards.
• Understand the needs and expectations of each client, recommend body treatments and provide the most effective wellness service to the client.
• Maintain high level of professional customer service.
• Handle customer queries and concerns efficiently and politely
• Create excellent guest experience through friendly and helpful attitude.
• Responsible for the maintenance of cleanliness and neatness of the facilities and treatment room and other parts of the spa.
• Responsible preparing the necessary treatment products and replenishment of stocks
• Follow and comply with the instructions given by Spa Manager

Requirements

• Communication and customer service skills.
• Able to work on weekends / public holidays.
• Able to work long hours and overtime.
• Pleasant personality, Positive attitude, hardworking and good teamwork.

Hougang district

• $2000-$2700

• 5-day work

• 9.00am – 6.00pm (working hours can be discussed and rearranged)

• Candidates require working pass need not to apply

Job scope

• Issue invoice, quotations, statement of accounts to customers

• Maintain filing system of documentations.

• Handling telephone calls

• Liaise with suppliers on payment and

• Work closely with operations team

• Maintain proper records for accounts / bookkeeping

• Maintain a positive relationship with both customers and suppliers

Job requirements

• Proficient in Microsoft word and excel

• At least 1 year of working experience in related field, familiar with vehicle accident insurance claim preferred.

• Bilingual in both English and Mandarin (to handle enquiries from Chinese speaking customers and suppliers)

• Proactive and take initiatives in work

• Good communication and interpersonal skills

• Team player

Scientist/Senior scientist will be part of heterogeneous integration group focused on development of the quantum packaging technology platforms to integrate qubit and control chip on superconductivity interposer.

He/she will work with cross functional team to:

• Design and simulation of superconducting circuits for salable quantum processor in 3D flip-chip architecture.
• Explore and develop superconducting nanowire base photo detector.
• Design and layout of circuits components of a superconducting qubit.
• Develop design rules and PDK for quantum packaging technologies.
• Provide quantum packaging solutions to meet the system requirements based on the simulation results.
  Prepare competitive grant research proposals and lead execution of these proposals.
  Engage industry partners to align and develop the building blocks required for next generations quantum packaging platforms.

Job Requirements:

• Master/PhD in quantum computing; Electrical and Computer Engineering; Material science area
• 4 to 5 years’ experience in superconducting circuits design and simulation for scalable quantum processor. Deep understanding on 3D quantum package
• Working experience on measuring loss and dielectric constants of materials at cryogenic temperatures
• Strong communication, industry awareness, and problem-solving skills.
• Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to get things done.

Job and Responsibilities:

· Provide application support to end users in troubleshooting and resolution of issues and updating them of the progress which entails communicating with them in an appropriate and constructive manner.

· Plan and execute Change Requests activities which include gather and facilitate business process discussion, conduct detailed analysis, solution design, development and configuration, testing, documentation and deployment.

· Work closely with the internal team and vendors to fully understand the user functionality, pain points, and areas of improvements within SAP applications

· Develop / Update relevant Master Data Standards especially master data to support SAP processes integrate with other modules or application.

· Configure and optimize SAP modules such as PP, MM, WM, SD, PS, and QM to meet business needs.

· Perform system testing (Unit, Integration, and User Acceptance), troubleshoot system issues, and provide post-go-live support.

· Conduct data migration from legacy systems to SAP and create functional specifications for customized reports.

· Deliver end-user training and prepare detailed system documentation.

Skill Requirement & Qualification:

· Minimum Diploma/Degree in Computer Science or related field.

· MUST have overall 6 years’ hands-on experience in SAP implementations and support.

· Involved in at least 2-3 end to end cycle of SAP project implementation.

· Design, develop, test, debug and implement programs on SAP S4 HANA.

· Expertise in the configuration and supporting integration of SAP modules, including PS, PP, MM, WM, SD, and QM.

· Excellent problem-solving, communication, and team collaboration skills.

· Able to start in a short notice period.

ROLE:
A*STAR-IME is leading the way in establishing industry first 200mm open Silicon Carbide (SiC) R&D program. The program specific focus is on advancing 200mm SiC technologies in key areas such as epitaxy, gate stack, ion implantation, and dry etching, and integrating these modules to fabricate high-performance power devices. Our objective is to drive innovation in power device research, particularly in power MOSFETs rated above 1.2KV. Developing key innovative process is crucial for creating high-performance devices that will contribute to advancements in automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. This role involve growing leadership into ion implantation processes for p-body, channel, guard ring, source contact, and other components. We are currently seeking such individual with ~5 years of experience in ion implantation. The chosen candidate will be responsible for independently supervising ion implantation processes, conducting ion implant simulations, possessing knowledge of crystallography and ion interaction with atoms, having strong understanding of implanters and related thermal processing physics, beam optics, dosimetry systems, and vacuum technology. The ideal candidate should also be willing to collaborate with various departments, the technology development group, and customers. Furthermore, the candidate will contribute to the wide-bandgap team by sharing the ion implantation expertise on compound semiconductor materials and collaborate with other departments working with Si-based technology. The candidate will also be groomed to lead this diffusion process module group of ~6 headcounts into the future.

RESPONSIBILITIES:

• Diagnose malfunctions and using test equipment & software to test faulty tool; applying knowledge of the functional operation of the ion implant equipment

• Support on-site ion implanters in creating, running & characterizing recipes for recipe validation and develop process to achieve the desired dopant profile with excellent
damage recovery.

• Collaborate with vendors to optimize equipment performance and reduce tool downtime

• Analyze data related to implant-related defects formation with quantification and defects minimizations strategy

• Examine work-orders and communicates with equipment operators to resolve equipment problems & determine mechanical and human errors contributed to the issues

• Perform scheduled preventive maintenance tasks with tool operators, especially in checking, cleaning, repairing, detecting and preventing problems

• Responsible for designing experiments for ion implantation at various dose, energy, tilt, and twist levels

REQUIREMENTS:

• Ms/PhD Degree in Electrical Engineering or related field

• >3-5 years industrial experience for high power device design and modeling

• Extensive proficiency in medium to high energy/current ion implantation processes, including a comprehensive knowledge of implant equipment, equipment parts, and
troubleshooting techniques to minimize equipment downtime

• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species

• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile

• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors

• Familiarity with essential device properties resulting from ion implantation

• Adept at mentoring and transferring knowledge to junior staff members

Role & Responsibilities:

• Responsibilities include diagnosing appropriate levels of metal/metal-alloy contaminations by oxygen and other contaminants; determining the root cause of contaminants, and establishing protocols for characterizations.
• Hands-on providing support for onsite metal PVD, including creating, running, and characterizing recipes to achieve the lowest resistances.
• Collaborates closely with equipment vendors and device engineers to optimize the metal-stack for device performances and robustness/reliability, from low to high temperatures.
• Lead data analysis related to implant-induced defects and cleaning issues on metal contacts with solutions development.
• Examines the work-functions of metal/metal-alloys suitable for Ohmic contact on SiC.
• Responsible for designing experiments for Ohmic contact on various SiC substrates with different doping types, determining their impact, and resolving issues to achieve the lowest specific contact resistances.
• Designing cleaning processes to obtain ideal Schottky diode using various metal/metal-alloys on SiC for high-performance applications.
• Work closely with cross-departmental and integration teams and in 3-5 years’ time develop a WBG backend process integration team of at least 4 persons.

Requirements:

• PhD Degree in Material Science, Physics, Electrical Engineering or related field.
• >8 years related industrial experience inclusing backend process module integration.
• Extensive hands-on experience in PVD (Physical Vapor Deposition) processing for metal depositions and interface tuning.
• Strong understanding of metal-semiconductor contact physics.
• Expertise in work-function tunings of metal and metal-alloy.
• Proficiency in modulating electron affinity through implantation or surface treatments of semiconductors.
• Familiarity with wide band-gap semiconductor materials and their interaction with metal/metal-alloys at various temperatures.
• Thorough fundamentals in Ohmic contact and Schottky diode physics, as well as the impact of defects and contaminations on electrical properties.
• Skilled at mentoring and transferring knowledge to junior staff members.
• Excellent communication skills to effectively address customers' needs, concerns, and solution requirements.

Position:

Our team is starting an exciting project to develop RF/mm-wave ICs for the future of communication for Beyond-5G to 6G applications. We are looking for an exceptional candidate with relevant expertise to join us. Our team focuses on developing communication modules for both terrestrial and non-terrestrial needs. You will work at the Institute of Microelectronics (IME) to create the most advanced semiconductor technologies. You will collaborate with world-leading industries and academic institutions on innovative designs and strategic intellectual properties.

Job Responsibility:

• Benchmarking with datasheets, prior arts, and latest academic work.
• In-depth design and analysis with electrical/electromagnetic simulations.
• In-depth analysis of design robustness, optimization, and testability.
• In-depth presentations and report recording of design, layout, test and measurement, and fault analysis.
• Working independently, as a team, and with collaborators from industry and academic backgrounds.

Pre-requisites:

• A Master’s / PhD Degree in Electronics or Electrical Engineering and proven academic and industry experience are pluses.
• Experienced in designing RF/mmWave such as LNA, mixer, PA, buffer, transmission line, baluns, PLL, VCO, etc.
• Experienced in designing base-band/mixed-signal circuits, such as amplifiers, bandgap, ADC, DAC, etc., is a plus.
• Knowledgeable in design trade-offs at the circuit-level specification.
• Experienced in designing in CMOS and SiGe technology or any other technologies like RF-SOI and compound-semiconductor is a plus.
• Proficient in using Cadence and EM tools like ADS for EM circuit simulation, IC layout, LVS, and DRC verification.
• Familiarity with IC measurement and debugging and hands-on experience with RF/mmWave equipment such as spectrum analyzer, network analyzer, oscilloscope, and probe station.
• Good publication record with a strong awareness of state-of-the-art.
• Good communication and teamwork.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Summary:

• Industry: Healthcare
• Employment type: Temporary for 6 months
• Working location: Kent Ridge

Job Responsibilities:

• Assist in coordinating and providing administrative support for all meetings and events
• Preparation of meeting materials, coordination for circulations and recording into statutory records
• Minutes taking and minutes writing (preferred but not compulsory)
• Assist in preparing and circulating Directors’ Resolutions in Writing and related documents for signature and approval
• Filing of Notices with the Accounting and Corporate Regulatory Authority (ACRA), Charities
  Portal, etc.
• Managing and submission of claims, vendor invoice processing, including any procurement
  process involved
• Assist in Corppass administration and maintenance and all related functions
• Assist in any other logistics and administrative support

Job Requirements:

• Preferably possess a SAICSA Executive Diploma in Corporate Administration (EDCA) or a Degree equivalent
• At least 3 to 5 years of relevant experience in a public company or service provider for Corporate Secretariat services
• Ability to carry out basic corporate secretarial tasks with minimal supervision.
• Must be a team player, meticulous and have a keen eye for detail.
• Good verbal and written communication skills
• Proficient in Excel, PowerPoint and Word Documents.
• Ability to multi-task and work under tight timelines
• Good people, analytical and organisational skills

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.
We regret that only short-listed candidates will be notified.
Registration No: R24123448 / EA Licence No: 12C6253

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

System Installation & Programming

•Install lighting control systems based on design specifications and project requirements.

•Set up wiring and connections for control panels, dimmers, sensors, and other components.

•Program and configure lighting control systems to achieve desired lighting effects, energy efficiency, and user preferences.

•Customize control interfaces such as touch panels, mobile apps, or computer software to facilitate user-friendly operation.

Testing and Commissioning

•Conduct thorough testing of the installed lighting control systems to ensure proper functionality.

•Address any issues or discrepancies identified during testing.

•Commission the system to ensure it meets performance and design specifications.

Troubleshooting and Maintenance

•Diagnose and troubleshoot problems with lighting control systems.•

•Perform routine maintenance to ensure the continued reliability and performance of the system.

•Respond promptly to service calls and address issues in a timely manner.

Documentation:

•Maintain accurate records of system configurations, programming codes, and any modifications made during installation or maintenance.

•Provide documentation and training for end-users on how to operate and troubleshoot the lighting control system.

Customer Support:

•Provide technical support to end-users and address any inquiries or issues they may have.

•Offer recommendations for system upgrades or improvements based on evolving needs.

IT Engineer

Job Scope:

• Set up cloud infrastructure for AWS or Azure
• Install and configure software and hardware for project testing.
• Liaise with customers to gather requirements.
• Produce design / test document in a project.
• Hardening windows and Linux system
• Manage network servers and technology tools
• Set up cluster server, VMware, and workstations
• Create and verify backups of data
• Monitor performance and maintain systems according to requirements
• Respond to security or usability concerns immediately
• Troubleshoot issues and outages
• Ensure security through access controls, backups and firewalls
• Upgrade systems with new releases and models
• Build an internal wiki with technical documentation, manuals and IT policies
• Upgrade systems and processes as required for enhanced functionality and security issue resolution
• Act as L2/L3 Support. Able to perform System recovery

Requirement:

• Experience as a IT Engineer, System Administrator, Network Administrator or similar role
• Experience with Windows Server, Group Policy, Virtualization, networks (LAN, WAN) and patch management
• Familiar with Terraform is a plus
• Knowledge of system security (e.g. intrusion detection systems) and data backup/recovery
• Resourcefulness and problem-solving aptitude
• Excellent communication skills
• Degree/Diploma in Information Technology, Computer Science or a related discipline; professional certification (e.g. Microsoft Certified Systems Administrator (MCSA) is a plus

We are looking for a creative Social Media Content Producer to join the social media team in Lianhe Zaobao's China News desk. In this role, you will produce content for Zaobao's Chinese audiences, and grow Zaobao's audiences on Chinese social media platforms, specifically Xiaohongshu (XHS).

You will be expected to:

● Create, write, and publish engaging social media posts on XHS tailored for Chinese audiences, covering topics like life guides, attractions, and activities in Singapore, to raise brand awareness of Zaobao among the community

● Design and produce visual assets for social media, including graphics and memes

● Collaborate with producers, videographers, and editors to brainstorm, plan, film, and edit videos for XHS

● Edit short videos independently

● Present content through on-camera hosting or skit

● Stay updated on the latest social media trends, platforms, and news to innovate content production

Requirements

● Degree/Diploma in Media Studies, Communications, Digital Marketing, Journalism, or Graphic Design preferred

● Effectively bilingual in English and Chinese (written and spoken) as this role is for a Chinese publication

● Proven experience in creating content specifically for XHS or other Chinese social media platforms, with a focus on lifestyle topics; good understanding of what appeals to the targeted audiences

● Competent in graphic design software (e.g., Adobe Photoshop, Canva); able to film and edit short videos independently with Adobe Premiere Pro, CapCut, or other mobile video editing apps.

● Strong understanding of current social media trends, especially on XHS, to create culturally relevant content that appeals to Chinese-speaking audiences

● Possesses a strong sense of humour and creativity, enabling the quick development of engaging content

● Has a willing-to-learn attitude, meticulous, self-motivated and is able to work independently as well as collaboratively with various stakeholders

● Ability to manage multiple projects on tight deadline

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• Be part of the team to architect and bring up the new data platform and service infrastructure for autonomous prime mover (APM) business.
• Architect proper data models to meet all business needs in APM R&D and production operation scenarios.
• Design and develop scalable and robust backend services to serve data to developers, operators, and customers for creating dashboards, reports, supporting machine learning needs and triage and troubleshooting.
• Design and develop large scale IoT system to track live operation data for fleet management.
• Bring up universal auth integration and best security practice.
• Provide common client SDK for all data platform backend services.

Required experience

• Bachelor’s or master's degree in computer science or related relevant field.
• 1+ years' experience in backend implementation and RESTful API implementation.
• Experience with RESTful API framework in Python, Java, or Golang.
• Experience with high performance backend implementation, profiling, and monitoring.
• Experience with data modeling with relational database and NoSQL database.
• Experience with docker, K8s or other containerization techniques.
• Experience with proper CI/CD setup.
• Excellent communication skills.

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Tenure-track faculty positions in Geotechnical Engineering, on areas related to Urban Sustainable Development and Climate Change. Faculty members will be expected to teach existing undergraduate and graduate courses as part of the Civil and Environmental Engineering curricula, as well as develop new and innovative courses related to geotechnical engineering and sustainability.

Job Requirements

The candidate should hold a doctorate in civil engineering or a closely related discipline, preferably with background and experience in, but not limited to, one or more of the following geotechnical domain expertise: underground space, land creation, sustainable geo-materials and coastal resilience. Additional skills and knowledge in centrifuge modelling, data analytics and machine learning will be highly advantageous. The ability to develop and maintain an active and externally funded research programme within his/her area of expertise will be an added advantage.

Job Description

The Engineer will be responsible for driving electro-mechanical product development in compliance with ISO 13485 standards across multiple levels, from component to product. The role includes planning and monitoring New Product Introduction (NPI) programs, managing engineering changes, and maintaining documentation, including Design History Files. The position requires close coordination with both internal and external suppliers, adhering to Quality Management System and regulatory standards.

Key Skills and Experience:

• Bachelor degree in Mechanical Engineering with 3+ years in electro-mechanical systems.
• Technical proficiency in optimizing designs for mechanical and electro-mechanical systems.
• Solid understanding of metal and plastic manufacturing processes for product design.
• Proficiency in 3D CAD software (e.g., SolidWorks), including GD&T and kinematic calculations.

Attributes:

• Analytical and detail-oriented, with a collaborative and hands-on approach.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

The responsibility of this position is to drive and manage the Keppel submarine cable infrastructure projects which includes the following activities.

• Work with the Joint build partners, customers and internal business/commercial teams and plan for new subsea cable projects through diverse, secure and practical routes that meet all stakeholders needs and where there is a customer demand.
• Convert the business requirements into detailed engineering specifications by evaluating the industry trends, proven state of art technology, cost optimization, future proofing, optimum fiber pair count, etc.
• To evaluate the optimum cable route through desktop study by engaging with relevant vendors, drive Invitation to Tender process by capturing the Cable owners/Joint Build Partners’ requirements, evaluation of bids, adjudication and selection of vendors by forming various metrics of evaluation.
• Development and finalization of supply contract with the subsea cable vendors by close coordination with the Joint build partners, internal legal team and various stakeholders.
• Work with the submarine cable vendors & partners and drive the implementation of the submarine cable system including design, manufacturing and installation activities.
• Collaborate with the landing service providers, vendors, partners and various internal teams and ensure that the purchasers’ deliverable items (say permits, cable landing station, fronthaul route, wayleave/lease for the land, etc.) are made ready on or before the target timelines, which also includes the formulation and execution of agreements from the technical aspects.
• Work closely with the customers, partners and suppliers on project implementation activities like site survey, design/build of CLS, installation, testing and commissioning of submarine cable and terminal equipment and follow up regularly to get all activities completed on time.
• Ensure that the customers obtain their relevant statutory permits in their respective countries for initial installation with regular follow-up and providing necessary support to them as well as coordination with the supplier.
• Ownership and management of the customer experience and relationship management;
• This position serves as a subject matter expert and a point of contact for the customers and partners on the implementation of the subsea cable cable projects.
• Conduct periodic review meetings with partners/customers/stakeholders and various vendors/providers to discuss about performance, issues and related action items.
• Travel may be required within the region or other regions to assist at various sites. Must have good communications skills.
• Project and Operations activities can often require after-hours coordinated activity and/or unplanned after-hours accessibility involving customer specific.
• Ability to multi-task and work independently with minimal supervision in a non-structured environment. Superior interpersonal skills required to work with suppliers, partners, customers and internal departments for managing the life cycle activities of the submarine cable operation.

JOB REQUIREMENTS

Knowledge and Skill requirements

Education and Experience

• Degree in Engineering. (Electrical, Electronics or Telecommunication Engineering)
• At least 7 to 10 years + relevant experience in submarine cable operations or submarine cable projects

Knowledge, Skills and Abilities

• Experience in driving submarine cable projects especially on the conceptualization, design, vendor selection, contract forming and Project implementation stages.
• Experience in working with submarine cable equipment like PFE, monitoring equipment, OADM, SLTE, OTDR/COTDR, Spectrum analyzer, etc.
• Experience in handling customer service delivery, assurance or partnership management.
• Well-developed analytical and problem-solving skills, with the ability to set priorities, recognize basic causes, and recommend problem solutions that meet the practical needs of the business
• Good communication skills (both written and verbal)
• Balanced interpersonal style; a team player able to work effectively with employees at all levels
• Self-starter, able to take initiative and work with minimum direction in a fast-paced environment
• Ability to work under severe time pressure