Key Responsibilities:

• Perform testing of petroleum products, refinery intermediate, process and effluent water
• Conduct sampling and testing of gases and LPG streams
• Perform QC/QA work including calibration and maintenance of equipment
• Perform stock-taking and reordering of chemicals and consumables

Requirements:

• Diploma in Science & Technology / Engineering or NITEC in Chemical Process Technology / Chemical & Life Science

n The Contractor shall provide integrated managed network services that encompass Network Administration and Management Services.

n Network equipment shall consist of, but shall not be limited to, hardware, software and firmware of network switches, routers, firewalls, intrusion detection systems (IDS), intrusion prevention systems (IPS), virtual private network (VPN) gateway, content engines, proxy, wireless access points, wireless controllers, hardware load balancer, modems, IP PABX, Uninterruptible Power Supplies (UPS), and server hardware. The phase “network devices” shall be used interchangeably with “network equipment”

n Network infrastructure shall consist of, but shall not be limited to, client and the In-Scope Institutions’ LAN and WAN, wireless network (WLAN), extranet connections, peer-to-peer connections to external agencies, Internet connections and the Demilitarized Zone (DMZ). The network infrastructure shall encompass the network services components including but not limited to, Network Time Protocol (NTP), Domain Name Services (DNS), Active Directory, Dynamic Host Configuration Protocol (DHCP), remote access, VPN and Cisco Secure Access Control Server (ACS). The phase “data network” shall be used interchangeably with “network infrastructure”.

n The Contractor shall perform day-to-day network operation for the network infrastructure and network equipment and the In-Scope Institutions’ premises.

o The Contractor shall setup and operate an online network operation management portal as part of the Network Administration and Management Services for general access and the In-Scope Institutions’ end users at no additional cost to the client and/or the In-Scope Institutions. The information presented in the portal shall be up-to-date and shall include, but shall not be limited to, the following:

• (i) Network diagrams and equipment configuration such as IP addresses, firmware and software version for the network equipment in multiple levels, hierarchical details and categorized by respective In-Scope Institutions.
• (ii) Physical layout and location of the network equipment per each Site.
• (iii) Configuration change history of the network equipment.
• (iv) Cable plant inventory inclusive of labels and tags information.
• (v) UPS inventory inclusive of capacity, usage, support and maintenance details.
• (vi) Online job requests submission and job requests status.

(vii) Incident reports status and workflow for tracking of escalation and resolution

The NTU Office of Commercial and Auxiliary Services (OCAS) oversees the management of estate leases and commercial services (such as leasing of spaces for F&B, amenities & lifestyle services), and auxiliary services (such as car parks and shuttle bus services) for NTU’s main campus, Novena campus and NTU@one-north campus.

OCAS is looking for a dynamic and adept individual to be part of the team to manage transport services under the Auxiliary Services team, including the campus shuttle bus services, car parks and EV charging facilities for the University.

Key responsibilities:

• Ensure good governance and administration of contracts with vendors for bus, car parking and EV charging services.
• Manage relationships with key stakeholders of the University and relevant government authorities.
• Prepare transport budget, reports and keep track of financial targets.
• Monitor & track services rendered by providers in accordance with contract requirements.
• Ensure service standards are complied with and seek improvements to enhance customer satisfaction.
• Implement campus mobility plans and work with other providers to explore new opportunities.
• Represent OCAS in working groups with other departments to conduct feasibility studies, identify gaps and seek solutions for the services.
• Work on the technology roadmap together with the transportation plans to provide efficient and eco-friendly transport solutions.
• Manage staff and external service providers to provide quality frontline services and project support.
• Benchmark the department with industry best practices, advise on industry/market development and develop recommendations for the department to stay in the lead.
• Serve as OCAS Safety Liaison Representative of Health & Safety Committee

Requirements:

• Degree in any discipline. Diploma holders with extensive experience in the transportation function may be considered.
• Minimum 3 years of relevant experience in managing administration / procurement, contracts management, financial transactions, and operations management, preferably in the transport industry or in an Institute of Higher Learning.
• Proficient in Microsoft Office applications (Word, Excel, PowerPoint, Outlook)
• Excellent communication skills
• Strong problem-solving skills
• Team Player

Job Description

- Knowledge of Partial accounting

- Perform accounting entries

- Familiar with MYOB software

- Issues invoices, process cheque payment and checking and

reimbursement of petty cash receipts

of petty cash receipts

- Prepare payment vouchers and data entries keying in

Job Requirement

- Diploma in Accounting

- Minimum 2 years working experience

- Good working attitude

Requirement

• ITE , Secondary or GCE `O Level
• Able to work on weekend
• Preferably with class 3 driving licence and working experience in related field

Duties & responsibilities

• Repair & maintenance work
• Provide technical support & responsible for the quality of work
• Overhaul, dismantle, re-assemble , cleaning and painting of valves
• Cleanliness of the work area
• Prepare documentation and report as and when required
• Travelling overseas if job required
• Ad Hoc Duties

Staff benefits

• Training provided
• Transport allowance
• Transport provided at pick up point
• Long Service award
• Profit sharing
• Yearly health screening

Responsibilities :

• Ensure that all task perform on the shop floor adhere to safety protocols
• Accurately reads and understands engineering drawings and work instructions
• Fabricate quality parts, meeting production schedules and time lines for delivery
• Perform production related or ad hoc duties as assigned by the Foreman or Management
• Setup and operate CNC machine tools to machine parts to required specifications as in drawings
• Take measurement using instruments or gauges and documents quality check
• Marked parts identification, maintain a clean and organized work area

Requirements:

• O Level/Nitec in Precision Engineering
• Minimum 1 year experience in Machine Shop
• Understanding of precision engineering drawings
• Knowledge and experience in operating CNC machines

Job Responsibilities:

• Prepare, Process and Follow up on Sales Orders.
• Review customer’s requests and prepare quotation in response to customer enquiry.
• Perform order entry duties accurately and in a timely basis.
• Generate manufacturing documentation to manufacturing planning for creation of Production Order.
• Review Delivery Orders to ensure error-free before goods delivery.
• Update and maintain delivery schedule or re-schedule.
• Update of Sales Order status.
• Prepare weekly or periodic reports of compiled orders.
• Others ad-hoc duties may be assigned.

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Sales Coordinator or Shipping Assistant
• Preferred with knowledge of SAP
• Preferred with knowledge of Shipping process
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

You will play a pivotal role in one of A*STAR flagship programme as a Business Lead. You will be responsible to look for companies to join the programme's ecosystem and drive projects as the outcome to create impact to Singapore Supply chain innovation. You will also be tasked to manage business accounts to maintain customer relationships to strategically drive projects for long-term growth.

JOB DESCRIPTION

• Generate leads, prospect new businesses by networking, or through other means of generating interest from potential clients
• Take ownership of customer accounts, manage and strengthen relationships with executive C/B-level stakeholders
• Build key customer relationships, identify business opportunities for growth, negotiate and close business deals
• Work closely with the technical team and lead translation of research outcomes to business viable products
• Lead conversations with customers to capture business and technical requirements to provide proposals for projects
• Coordinate and integrate not only ARTC but also sister research institutes to deliver business viable solutions
• Maintain customer relationships to strategically place new products and drive projects for long-term growth
• Create and implement business plans, prepare and conduct commercial growth presentations
• Lead translation of research outcomes to industry adoption

JOB REQUIREMENT

• Bachelor in any engineering and science related discipline
• Experience working in the clean energy sector would be an added bonus
• Proven track record of successful business deals closure
• At least 3 years of working experience in B2B business development, enterprise sales/account management or marketing
• Strong business acumen, driven to deliver customer
• requirements and project deadlines
• A team player and technically motivated to solve problems, innovate and deliver to internal and external customers
• Professional presentation and communication skills for the management-level audience, both written and verbal.
• Positive attitude, resilient and agile, quick to adapt to changing priorities in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Avantus is an Authorized Training Provider and Partner for many vendors, offering both end-user and technical courses in Singapore and funded courses is within your reach.

We are looking for a highly-driven and motivated Sales Executive to join our team. If you are looking for an opportunity to gain value-added experience and exposure, this is the place for you!

As our Sales Executive, your main responsibility will be to drive our business success by building a strong relationship with new & existing accounts. Your main goal will be to turn leads and opportunities into paid sales, in order to meet & exceed sales target.

Successful candidates should demonstrate a keen interest in the domain of Training and Certification, Skills and Learning.

The successful candidate will be responsible for establishing new customers, manage existing Enterprise accounts and will hold a sales target.

He/She will engage directly with Customers/Partners, maintain and grow relationships through our extensive catalog of learning products and services.

• Meet sales and exceed sales targets.
• Meet reporting and performance expectations.
• Engage and co-ordinate on sales campaigns.
• Manage and grow industry contacts and brand awareness.
• Maintain the highest levels of business ethics.

Job Responsibilities:

· Provides administrative support to ensure efficient operation of office.

· Answers phone calls, schedules meetings and supports visitors.

· Carries out administrative duties such as filing, typing, copying, scanning etc.

· Exhibits polite and professional communication via phone, e-mail, and mail.

· Supports team by performing tasks related to organization and strong communication.

· Provides information by answering questions and requests.

· Contributes to team effort by accomplishing related results as needed.

· Any other adhoc duties as assigned

Working Hours: 0830 – 1800 (5 Days Work Week)

Skills and Qualifications:

· Microsoft Office Skills

· Managing Processes

· Organization

· Analyzing Information

· Professionalism

· Problem Solving

· Communication Skills

· Auto-motive experience preferred

Create drawings and models from written and verbal specifications obtained from Project Engineer.

Work with Engineers regarding model accuracy, design, drafting standards and design documentation.

Work closely with Designers, Drafters, and Engineers to ensure coordination design effort is maintained.

Complete project responsibilities within scope, budget and schedule.

Review drawings for completeness and accuracy.

Maintain all revisions of project drawings.

Update and maintain drafting log.

Develop 3D models by analyzing prototypes and 2D drawings.

Examine and check engineering drawings for compliance with cited specifications.

Provide timely technical assistance and solutions to the team.

Participate in project meetings and conference calls

RESPONSIBILITIES:

• Assist in the Recruitment processing, Job posting, and Job application / Renewal
• Preparation of employment contracts
• Processing worker’s repatriation
• Liaising & correspondence with Government agencies
• Handling phone calls and ensuring telephones calls are directed accordingly to specific person/team at all times.
• Responding to government surveys.
• Handling Work Injury reporting to MOM and processing its insurance claims
• Handles and process company Insurance
• Performs other ad hoc duties when necessary

REQUIREMENTS:

• Atleast 3 year of experience
• Proficient in PC applications such as MS Word, MS Excel
• Able to work overtime
• Ability to work under pressure and tight deadlines

1. Design and Drafting:

- Use computer-aided design (CAD) software to create detailed engineering drawings and plans.

- Assist in the design process for various projects, such as buildings, machinery, or electronic systems.

2. Testing and Quality Control:

- Conduct experiments and tests to evaluate the performance and reliability of products or systems.

- Implement quality control procedures to ensure that products meet industry standards and specifications.

3. Technical Support:

- Provide technical support to engineers or other team members in the development and implementation of projects.

- Troubleshoot and solve technical problems that may arise during the design or manufacturing process.

4. Maintenance and Repair:

- Perform routine maintenance and repair of equipment or systems to ensure proper functionality.

- Diagnose and address issues with machinery or electronic systems.

5. Project Management:

- Assist in project management tasks, such as budgeting, scheduling, and coordinating activities to ensure project goals are met.

- Collaborate with cross-functional teams to achieve project objectives.

6. Installation and Commissioning:

- Participate in the installation and commissioning of new equipment or systems.

- Ensure that installations meet safety and performance standards.

7. Documentation:

- Prepare technical documentation, including manuals, reports, and specifications.

- Maintain accurate records of engineering activities and project progress.

8. Research and Development:

- Contribute to research and development efforts by staying updated on industry trends and incorporating new technologies into

Responsibilities:

- Fetch workers, construction materials and documents

- Manage daily delivery

- Delivery document according to the instruction

- Maintain company vehicle cleanliness and good condition

Requirements:

- Possess Class 3 driving licence (with a clean record) for the past 3 years

- Able to perform overtime

- Physically fit, good working attitude and committed

Job Descriptions:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to subcontractors to facilitate the smooth workflow process.
• Communicate with the management, sub-contractors and keeps track of the progression of the sub-contract.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Diploma or Bachelor's Degree in Quantity Survey or equivalent.
• Entry level or with 1-2 year(s) of working experience in the related field is required for this position.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• Location: Tampines.

Data Management and preparation of statistical reports

• Status tracking, including collecting, analysing, summarising/dashboarding for regular reporting of proposals and awarded grants, technology disclosures and publications:
• Awarded Grants: Liaise with other offices (Finance, PMO, SIMTech IDO, ARTC BDO) to consolidate data
• Technology Disclosures: Liase within RDO to consolidate data
• Publications: Liaise with SIMTech and ARTC Divisions and A*STAR SERC Planning to consolidate and align data
• Consolidate statistics and provide regular reporting to SIMTech, ARTC and SERC
• Carry out periodic update of Staff List and Affiliations for up-to-date reporting
• Continuous improvement to enhance data capture and information flow across departments
• Management of RDO shared folders and archival of documents for Grants, Technological Disclosure and Publications

Digitalisation and Dashboards

• Update (as required) and maintain Power BI Dashboard for pipeline proposals
• Design and maintain Power BI Dashboard for Technology Disclosures and Publications
• Propose, develop, maintain, and automate process approval workflows for all RDO-related approvals

System maintenance and updates

• Own, update and maintain TD system including troubleshooting and updating of approval workflows
• Design, build and maintain S&A Knowledge Management System (connecting Research Personnel, Technology Disclosures and Publications)

Intranet Page and Portals

• Maintain RDO intranet page with up-to-date information on Technology Disclosures and Publications
• Set up and maintain lists for Scopus and Scival portals
• Support RDO activities and tasks, as required
• Cover other RDO job functions, as required

EDUCATION QUALIFICATION

• Diploma or Degree in administration or science or engineering

JOB REQUIREMENTS

• Meticulous and attention to details
• Good command of PowerPoint and Words functionality for reporting
• Good command of Excel and Power BI for data management and dashboarding
• Good analytical and problem-solving skills
• Knowledge on research/technical terminologies
• Good communication, interpersonal and stakeholder engagement skills
• Able to multi-task and deliver results under tight timelines

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Operating of Grab Machine to excavate underground soil and rock.
• Involved in assembling and dismantling of Grab Machine throughout the whole project.
• Daily maintenance of Grab Machine.
• Require crawler crane license.
• Must have deep knowledge in mechanical of the Grab Machine.
• 5 years foundation working experiences in operating of Grab Machine in LTA project.
• Working in various construction sites across Singapore

We are in specialised building related materials business, related to the field in noise control.

We promote our products to designers like architects, interior designers, building engineers and owners.

You must be able to read architectural drawings in order to make recommendations and proposals to the designers and clients.

Financial Analyst, Customer Solutions - Singapore, APAC Ads Finance

Target Level: 4 - 5

Our Mission

The APAC GCS Finance team partners with sales and cross-functional leadership to provide analytical input and recommendations on key business decisions. We are responsible for core operations such as forecasting and budgeting, and act as a key advisor to the leadership team on topics such as business performance, risks and opportunities, market acceleration plans and resource allocation.

The Role:

- From ensuring flawlessly smooth operations to enabling rich insights on business performance and shaping the development of regional priorities, the Finance organization is an important advisor to the business and a guardian of long-term value creation. In this role, you will work with senior sales leaders Customer - ----Solutions, act as a trusted advisor and a guardian and own end-to-end finance partnering on regional business priorities.

With strong analytical skills and presentation skills, you will distill crisp insights on complex, ambiguous topics, helping the APAC GCS senior management team make better business decisions. You will operate with a high degree of independence and collaborate closely with the GCS finance leadership and central finance teams based in the US to drive an effective business partnership. You will engage closely with and influence a wide range of stakeholders in Google’s global, regional and local teams, as well as senior management, across Finance, Sales, and Strategy and Operations.

Responsibilities:

• Provide management with clear insights and recommendations into drivers of revenue, market trends, risks, and opportunities leading to revenue enhancing sales & product actions.
• Engage in deep dive analyses to understand business performance, and provide concise summaries and recommendations to management.
• Support critical financial planning processes such as revenue forecasting, sales target setting, revenue calls preparation, and sales performance evaluations.
• Work with cross-functional teams to develop business cases / strategic plans backed by relevant analyses and insights

Minimum qualifications:

• BA/BS degree in a quantitative field of study preferred with a strong academic record.
• 3 years experience in strategy consulting, corporate finance or similar commercial analytical role
• Sound business judgement and problem solving, and analytical skills
• Fluency in English

Preferred qualifications:

• Excellent communication skills: ability to craft and deliver clear, coherent and concise messages to senior business leaders
• Leadership skills and ability to collaborate effectively with dispersed cross-functional teams
• Strategic thinking and an aptitude for problem solving,
• Advanced proficiency in spreadsheets/ modeling. Familiarity with, and/or enthusiasm for SQL and working with large volumes of complex data

Skill/Experience/Education

Mandatory

Financial performance metrics Ability to create, track and manage KPIs and other financial performance metrics.

Financial research and analysis

The ability to systematically gather and analyze data from a variety of internal and external sources (e.g. external valuations,10Ks, benchmarking, commodity movements) and draw conclusions, generate alternative solutions and evaluate outcomes.

This includes the ability to add value to business planning and strategies.

Financial technical aptitude Experience with SQL Ability to quickly learn and/or use a financial system/technology (e.g., SQL, or relevant systems), understand and clearly explain familiar finance related technologies, solve or analyze technical issues or provide useful technical insights when needed.

The School of Materials Science and Engineering (MSE) at NTU invites applications for the position of Research Fellow. The Research Fellow will be involved in the chemistry, physics, applications, and deployment of bare and coated magnetic particles.

MSE provides a vibrant and nurturing environment for staff and students to carry out research in key areas. The School is consistently ranked in the top 3 worldwide. MSE is equipped with various types of apparatus and equipment for both teaching and high quality research. MSE seeks to aggressively develop and commercialize technologies based on a NRF/CRP-funded project: Directed Energy Materials for Advanced Manufacturing. This technology aims to deploy induction technology for the manufacturing of sustainable composites, plastics etc. in industrial sectors such as automotive, sports, and green energy.

Key responsibilities:

• Develop the chemistry, physics, applications, and deployment of bare and coated magnetic particles for directed energy applications.
• Develop induction systems for deployment of the particles in applications
• Synthesis, characterization and property evaluation of magnetic materials and polymers.
• Develop induction systems for deployment of the particles in applications.
• Research design and deploy industrial demonstrator.
• Manage and deliver project KPIs and objectives per plan
• Ensure milestone delivery per plan/schedule, manage/control project risks & mitigating actions
• Prepare/consolidate periodic reports (finance, technical) as required
• Manage project documentation, knowledge/data capture and reporting
• Manage logistical issues and laboratory inventory
• Ensure compliance with health and safety in all aspects of the research work
• Generate technical reports, write journal papers, and liaise with collaborators.
• Collaborate with industrial partners to commercialize and spin-out technology platforms.
• Research design and deploy industrial demonstrator.

Job Requirement

• Minimally PhD degree in Materials Science and Engineering or closely related discipline,
• Knowledge of synthesis, characterization and property evaluation of high-performance materials
• Knowledge of manufacturing technologies
• Energetic and self-motivated
• Excellent interpersonal and communication skills, and ability to work in a diverse, interdisciplinary research environment.
• Experience in schedule and resource planning.
• Ability to work well with multiple competing priorities, manage projects and meet deadlines.
• Ability to work independently and as part of a team with strong initiatives.
• Evidence of research output, communication, and interpersonal skills.
• Familiar with the synthesis, characterization and property evaluation of magnetic materials and polymers
• Strong record of scientific/industrial impact within a composites/materials/engineering sector
• Strong communication skills, an energetic, self-motivated and can-do attitude and ability to effectively interface with vendors is vital.
• Strong expertise in areas related to directed energy materials for advanced manufacturing

We regret that only shortlisted candidates will be notified.

Roles & Responsibilities:

• Perform data entry and general administrative matters
• Calling merchants to confirm appointment time
• Prepare sticker printing for shipment
• Mail of normal and registered letters
• Monitor daily sales and stock level
• Manage devices and follow up on faulty device status
• Attend to walk in customers for card collection
• Sorting and keeping proper record of devices
• Any other ad-hoc duties as assigned by the management

Requirements:

• GCE “O” Levels
• Proficient in MS Word and Excel
• Able to resolve issues independently
• Good at multi-tasking and good team player
• Keen to learn and has good working attitude
• Able to speak Mandarin to communicate with each other

You will be performing the following scope of work for a system / family of systems for a key client:

1. IT Service Management

2. Configuration Management

3. Incident Management

4. IT Security Management

5. IT Security Compliance & QA Management

The following are the activities in each scope of work:

IT Service Management

· Monitor and report on the SLAs/KPIs performance for the in-scope systems, according to the IT Infrastructure domains, to the client.

· Liaise and work directly with client (stakeholders, Ops Managers and/or Contractors) for the purpose of services delivery and operations support.

· Monitor and update client on operation concern and/or compliance matters and propose resolution.

· Provide monthly summary and/or progress report on systems health, statuses, risk status and status of CR/SR and System Problem.

· Conduct and/or participate in management update meetings - Operations, Service Review, Audit and Management Meeting.

· Review reports from the IT Infrastructure Operations & Support (O&S) project teams

· Provide leadership support to O&S Project teams during Audit, DR/BCP, Backup & Recovery exercise.

· Propose continuous improvement initiatives with recommendations to strengthen IT governance & compliance, increase efficiency on work quality and processes.

· Prepare Management plan and submit compilation to the Client annually.

IT Configuration Management

· Periodically review IT asset inventory (hardware, software, network equipment, network attached equipment and endpoints) records maintained and updated by Client appointed Asset Officer.

· Maintain oversight and review the obsolescence of IT assets across the IT Infrastructure.

· Prepare and submit report to Client.

Incident Management

· Lead investigation and resolution of incident.

· Oversee the conduct of root cause analysis and recommend improvement solutions for recurring incidents to Client.

IT Security Management

· Schedule security scan for identified systems according to policies and verify all vulnerability rectifications are satisfactorily performed.

· Conduct Security Review on System Access and administration patterns weekly, and report unusual or suspicious activities, if any, to SMO Head Office.

· Track, mitigate and deploy patch security vulnerabilities accordingly to the stipulated timeline. Maintain oversight and submit reports on monthly basis.

· Escalate and/or seek Client’s acceptance and approval of assessed risks.

IT Security Compliance & QA Management

· Ensure compliance status of the Systems adheres to applicable standards, polices, directives and guidelines.

· Declare, review and report compliance status to SMO head office annually.

· During audit exercise, work with stakeholders to provide responses and evidences to auditors or compliance related declarations.

· Provide a Rectification Plan on any gaps found.

· Provide rectification plan for issues arising from audit.

· Seek waiver on compliance whenever it is justifiable.

· Ensure all applicable standards, policies, directives, guidelines, deliverables and quality assurance records are filed and kept up to date for audit and review purposes.

· Work with Client on system enhancement required for policy changes and audit requirements.

Requirement :

· Degree in Information Systems, Computer Science or equivalent

· More than 3 years of IT project management experience and at least 5 years of IT experience

· Experience in Exchange systems / M365 is required.

· Familiar with operation, administration, and maintenance of the Messaging & Collaboration systems

· Has knowledge of, and familiar with, the following services:

o Window Server platforms, Microsoft Exchange, Skype for Business

o O365 suite of productivity services

· Self-motivated with a positive “can-do” attitude, creative with excellent presentation, communication, negotiation and interpersonal skills including strong persuasive techniques

· Able to lead, develop and maintain respectful and trusting relationship

· Able to travel as and when required

We are looking for safe and competent drivers for transportation of goods via Container, Isotank or Loose Packages.

Responsilibities:

• Comply all Road Traffic, Port & Customers rules and regulations.
• Ensure proper housekeeping, serviceability and basic maintenance of fleet assigned.
• Ensure the safety and security of the goods during transportation.
• Record and report all goods moved.
• Raise any near-miss, safety breach or vehicular maintenance matters.
• Record and report any incident/ accident.
• Assist to load and unload goods from Isotank or Loose Packages.
• Minimum 1 year relevant experience with Class 4/5 driving licence.
• Please contact 63078011 for walk-in interview.

Location: West

Mon to Fri 8.30am to 5.30pm

Have AWS & Bonus

Good career progression

Job Description

• Support finance/management control
• Prepare yearly budget and quarterly forecast
• Prepare monthly analysis for financial reports
• Analysis the variance of financial results and budget/forecast
• Monitor and review each division’s action plan
• Support yearly external audit, yearly transfer pricing report, yearly external reporting, ad-hoc internal audit, ad-hoc external surveys
• Prepare documents for Annual General Meeting, Board of Director Resolutions
• Issue Business Consignment Fee’s quotations and invoice From MAP
• Prepare simple agreements

Requirement

• Diploma/Degree in related disciplines
• At least 2 years relevant experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Cook food items accurately to specifications.
• Assist in the accomplishment of tasks within the time frame given.
• Ensure mise-en-place are replenished before each meal period.
• Monitor the food par level after each meal period.
• Ensure areas of responsibility are clean, tidy and organized.
• Assist in monthly inventory counts and record food wastages.
• Ensure proper hygiene practices are followed at all times and ensure proper storage methods are followed.
• Assist in daily purchasing and receiving of goods.
• Ensure freshness of ingredients.
• Perform other tasks and duties when assigned to.

• Minimum 1 year of asian, western culinary experience as Kitchen Assistant, Cook, Senior Cook, Chef de Partie position.
• Able to work 6 days work week rotating shift, weekends or public holidays