Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Responsibilities

· Design and implement software of embedded devices and systems for commercial deployment.

· Develop codes for product firmware and conduct design review and code review to obtain design approvals.

· Develop technical specifications and identify technical challenges and resolve issues.

· Test and qualify firmware module for integration.

· Perform technical root cause analysis and outlines corrective action for given problems.

· Drive technology/development projects in all phrases from specification to release

Pre-requisites

· Degree in Electronic/Electrical/Computer Engineering/Computer Science, Software Engineering or related fields.

· Minimum 3 to 5 years’ experience in real time embedded system and firmware.

· Strong knowledge of software development quality management systems, quantitative, analytical and problem-solving skills

· Good knowledge of microprocessor and microcontroller architecture.

· Excellent teamwork skills, flexibility and ability to handle multiple tasks.

· Good interpersonal and communication skills.

· Able to work independently with positive disposition.

Additional Information

Career Level

Junior Executive

Qualification

Bachelor's Degree, Post Graduate Diploma, Professional Degree

Years of Experience

3 years

Job Type

Full-Time

Job Specializations

Computer/Information Technology, IT-Network/Sys/DB Admin

Company Overview

Trek Technology (S) Pte Ltd is a subsidiary of Trek2000 International Ltd, an industry leader, innovator, original inventor and patent owner of the ThumbDrive® (i.e. USB Flash Drive) offers state-of-the-art design solutions ranging from Mobile Media Solutions, Wireless, Antipiracy, Compression and Encryption to sophisticated Enterprise Solutions all catering to the fast changing digital industry.

Trek with its library of granted patents is represented all over the world and has offices in the U.S., Malaysia, Thailand, India, Hong Kong, Singapore, the Netherlands, China, the Philippines, Vietnam, Cambodia and Japan to serve the rapidly expanding markets across all regions.

As part of a public listed company whose shares are quoted on the Singapore Stock Exchange (SGX:Trek), Trek was named by Forbes Global as one of the Best Small Companies in the World of 2000 and 2002. Trek 2000 International Ltd was also ranked as the Best Managed small Company in Singapore by AsiaMoney (of Euromoney). Trek also received the INVENT Singapore AWARD 2008; the ASEAN BUSINESS AWARDS for Innovation in 2011 and ASIA-PACIFIC ENTERPRISE LEADERSHIP AWARDS for Spirit of Innovation Award in 2013.

Trek®, ThumbDrive®, DivaDrive® and FluCard® are trademarks or registered trademarks of Trek Group of Companies in Singapore and / or other countries.

For more information, visit our website at http://www.trek2000.com.sg, http://www.thumbdrive.com, http://www.flu-card.com.

Key Responsibilities

1. Support enquiries for Employment Terms and Conditions (and country specific provisions)
2. Point Mgrs./EE's to information on enquiry of HR Programs/Policies/Processes/Systems
3. Provide admin support on EE Separations
4. Admin role in ER documentation
5. Admin support for Mobility requirements
6. Admin support for Staffing needs
7. Provide information to Mgrs./Employees with enquiry on resources avail for development needs
8. Admin support on Payroll tasks
9. Admin support enquiries on Rewards programs

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Operations Executive is primarily responsible in performing defined flight watch duties; ensuring relevant information is transmitted to crew via suitable means and follow up in absence of acknowledgement from crew; coordinate with dispatch service provider and act as medium between flight dispatch and the pilot for operational support and flight following.

Responsibilities:

1. Coordinate with dispatch service provider and act as medium between flight dispatch and the pilot for operational support.

2. Perform defined flight watch duties,

3. Ensure operational information as defined in ORM is transmitted to crew via suitable means and follow-up on crew's acknowledgement,

4. Ensure that Flight Plan package consisting of all sectors for the crew, including weather and NOTAMs and a picture form of the most recent weather conditions/ volcanic activity charts (as published at regular intervals) are ready for the crew at sign-on.

5. Coordinate between pilot and dispatch service provider where applicable.

6. Strong knowledge on dispatch functions and responsibilities,

7. Ensure flights are crewed efficiently and within legality parameters,

8. Liaise and follow up agencies (eg JMC, GHA, airport AIS, etc) to ensure that flight operation are in check and flight departures are not affected,

9. Communicate with foreign government agencies airport slots (for adhoc or scheduled services).

10. Managing of flight satchels to ensure that information are available for operating crews upon reporting.

Requirements:

1. Diploma in aviation discipline,

2. Accredited Flight Dispatch Training qualification,

3. Have previous flight dispatch / flight planning experience,

4. Commitment to Safety,

5. Good communication and interpersonal skills.

Job Description & Requirements
The role of a Sales Support Executive / Coordinator / Admin is responsible for rendering all the after-sales support services to the customers. This includes processing of orders, preparing internal & external credit notes, payment collection, preparation of quotations, contracts, mailers, samples and coordination with other departments.

Specific Responsibilities
1. Responsible for taking customers’ orders via phone or email, input into system, print and sort the invoices.

2. Responsible to prepare internal & external credit notes.

3. Responsible for payment collection from customers.

4. Assist in the preparation of quotations / contracts / mailers / samples for sales team.

5. Assist point between customers and logistics department on all logistics matters.

6. Assist to check and coordinate on supply issues with warehouse, purchasing and production departments.

7. Maintain and replenish sales samples drawers.

8. Attend to office deliveries/mails as we do not have receptionist.

9. Assist in the preparation of the monthly report on sales performances to the management for sales performance evaluation when required.

10. Any other area of responsibilities that the company deems necessary.

Competency Requirements
1. GCE ‘O’ level.
2. NAV/Microsoft Dynamics 365 Business Central will be an added advantage.
3. Communication skills for coordination and customer service.

Working Hours
Monday - Friday : 8 30am - 5 45pm (1 Hour Break)
Saturday: 8 30am - 2 30pm (1 Saturday Shift Every 4 Weeks)

Job Description & Requirements

• able to manage complete operation
• atleast 5 years Exp as Cook/chef/Head Chef etc
• Should be able to prepare north Indian Cuisines & South Indian
• Take customer feedback
• take responsibility of all work done inside to improve the operation & sales
• manage and maintain client & employee relationship
• able to do any adhoc task onw his own
• should report any issue to senior level of management
• able to handle cash & ledger and update to management
• able to manage complete operation
• Take customer feedback
• take responsibility of all work done inside to improve the operation & sales
• manage and maintain client & employee relationship
• able to do any adhoc task onw his own
• should report any issue to senior level of management
• able to handle cash & ledger and update to management
• Cookig of north indian & South India Dishes is must and should have atleast 8 years exp in cooking in restaurant of hotel

1. Supervise ground operations and manage ground handling staff for appointed airline clients – passenger & cargo.

2. Provide necessary supports required by/from respective appointed airline clients.

3. Manage, motivate, and engage staff by providing an open feedback culture and managing performance on a regular basis.

4. Ensure compliance with all corporate and airline safety and operational procedures to meet/exceed regulatory standards.

5. Maintain, monitor, and report on agreed Key Performance Indicators (KPIs).

6. Conduct & report on irregularities, accidents, or complaints as per company’s standard reporting requirements.

7. Build and maintain relationships with both internal and external stakeholders. 8. Resolve issues and conflicts in a timely manner.

9. Ensure adequate manpower and resources available for smooth functioning of Airline designated counters at all times.

10. Provide service and operational recovery on Aircraft-on-Ground (AOG), lost or damage baggage etc.

You will support the Operations Manager in managing effective operations and maintenance of our retail mall.

Job Description

• Provide facilities management services for shopping malls
• This includes cleaning, pest control, horticulture, security management, ACMV, M&E, building services etc through our appointed term/ sub-contractors.
• Investigate, check and analyse reported breakdowns & faults to determine their cause for the prevention of future occurrences.
• Supervise upgrading projects for the shopping mall that you are assigned to.
• In addition, you will be responsible for car park management.
• Manage and attend to all feedback and service requests in a timely manner.
• Promote good relations with our partners and tenants.
• Lead the technicians and manage vendor services to achieve the required professional standards in day-to-day operations.
• Maintain building operation manual and any records relating to the building.
• Part of Company Emergency Response Team (i.e. Site Incident Controller, First Aider, etc),
• Part of Environmental Health Safety (EHS) team for review & approval of permit to work (PTWs), risk assessment, safety checks/audits of the mall.
• Any other duties are assigned by the Supervisor.

Requirements

• Minimum Higher NITEC/ Diploma in Building Services Engineering / Mechanical / Electrical or equivalent with minimum 2 year of relevant working experience, preferably in managing commercial properties or alternatively, possess at least 3 years of facilities management experience.
• Able to work within tight timelines, resourceful and systematic in resolving problems.
• Preferably possess certification for Fire Safety Manager.
• Pro-active, independent, able to work with minimal supervision and perform under pressure.
• Good communication and interpersonal skills.
• Service orientated mindset.

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

• To perform exterior aircraft surface cleaning;
• To operate scissor lift operation to support the cleaning as & when required;
• Any other duties assigned by the superior.

Job Requirements:

• No experience needed
• Able to work at height
• Able to communicate in English
• Comfortable with afternoon shift (1645 - 0230) work arrangement
• Candidate with valid Scissor Lift license, CAG Airfield Driving Permit (ADP) will be added advantage

Working knowledge of GDS & GSA airlines system

Perform reservation, ad-hoc/group bookings and ticketing

Attend to clients' travel enquiries and requests via phone

Understand clients' travel requirements & propose suitable itineraries

Provide visa requirements and assist in visa applications

Process all travel documents accurately (quotations, ticket issuance, billings)

Regular sales calls to existing clients

Build and sustain excellent working relationships with clients

After-sales tasks inclu schedule change, rebook, reroute, re-issue & refund

Flight inventory monitor and control including advance booking checks, ticketing deadline checks & dummy booking screening

Respond to travel agents, travelers and FFP members' enquiries on respective GSA products, rules & policies

Ensure smooth SOPs and operational guidelines set by GSA airlines

Maintain and update clients' profiles

Any other related ad-hoc tasks that may be assigned by the Company from time to time

Job summary

1) Responsible for the day-to-day AR / AP operations of the company.

2) To work as part of the Accounts team.

Area of responsibilities

1) Responsible for the daily AR / AP operations.

2) Assist on auditing schedules and liaise with external auditors, company secretary and tax agents for company related matters.

3) Responsible for the reconciliation of the bank accounts (AR / AP).

4) Prepare Fixed Assets Schedule.

5) Ensure that all transactions are entered into Microsoft Dynamics 365 Business Central (BC) and filed timely and accurately (AR / AP).

6) Responsible for the payment receipt (AR).

7) Monitor Accounts Receivable (AR) ageing report and follow up actively on collections.

8) Assist in the preparation of the relevant collection reports (AR).

9) Assist in the preparation of the relevant payment reports (AR).

10) Prepare GST schedule. (AP)

11) Responsible for all payment matters, including petty cash (AP).

12) Responsible for reconciliation of suppliers’ SOA and prepare payment (AP).

13) Any other area of responsibilities that the company deems necessary.

Competency requirements

1) LCCI

2) Accounting background would be an added advantage.

3) NAV/Microsoft Dynamics 365 Business Central account module profiency would be an added advantage.

Working Hours
Monday - Friday : 8 30am - 5 45pm (1 Hour Break)
Saturday: 8 30am - 2 30pm (1 Saturday Shift Every 4 Weeks)

Job Purpose:

You shall be responsible for the speech language programme for students &/or trainees with oral communication challenges including evaluation of all students &/or trainees with suspected or identified communication disorders and the development, management and coordination of a speech and language programme, including difficulty in swallowing.

Key Responsibilities:

Consultation

• Provide professional inputs to support understanding of clients’ speech, language and communication difficulties to teachers, parents/caregivers, professional staff, administrators and the public.
• Participate in collaborative problem-solving to assist teachers, parents / caregivers, professional staff and administrators with practical ideas and recommendations in the setting of goals, selection and design of intervention programs, etc.

Assessment

• Provide screening, identification, assessment, diagnosis, treatment and follow-up services for students/trainees with speech and language disorders.
• Measure outcomes of treatment and conduct continuous evaluation
• Identify effective practices and programs to improve and enhance quality of
• services.
• Able to apply formal and informal modes of assessment.
• Maintain efficient client records and documentation. i.e. Assessment reports filing in students’ confidential file.

Treatment Strategies

• Implement intervention program based on assessment, interpretation and planning.

Discharge Planning

• The Speech and Language Therapists should write a discharge based on the following:
• Documented evidence showing that the student has achieved all the objectives or the students can no longer benefit from the therapy.
• The student to be discharge from therapy services if he/she leaves the school.
• Recommend other services, if applicable to the student and other family members.
• Refer and write a discharge summary, if necessary, when the student is going to another service or an APSN School.

Training and Support

• Train and support teachers, caregivers and other communication partners of individuals with speech, language, communication difficulties.
• Mentor and supervise of support personnel.

Job Requirements:

• Recognized degree in Speech Pathology from accredited college/ university
• Good team player with strong communication and interpersonal skills
• Relevant work experience ranging from children to young adults with intellectual disability would be an advantage
• Ability to work with independently and with minimum supervision
• Valid practising certificate with Allied Health Professional Council (AHPC)
• Entry level candidates who recently completed the studies in Speech Pathology are welcome to apply. We will provide AHPC supervision requirements and support.

Additional Notes to Applicants:

APSN operates 4 Special Education (SPED) Schools and 1 Sheltered Workshop (Centre for Adults) with locations as below:

• APSN Chaoyang – Ang Mo Kio
• APSN Katong School – New Upper Changi Road
• APSN Tanglin School – Alexandra Road
• APSN Delta Senior School – Choa Chu Kang; and
• APSN Centre for Adults – Jalan Ubi

Do indicate your interest in School-Based or Centre-Based work and your preferred work locations when you apply.

Job Purpose:

Responsible for planning, developing, delivering and evaluating appropriate individualized educational services, learning programmes and instructions for special needs students in both self-contained and integrated settings in consultation with other school personnel.

Job Responsibilities:

• Implement and monitor effective teaching & learning pedagogies, intervention strategies for students with Special Education Needs (SEN)
• Design and implement valid and reliable modes of assessment to evaluate students’ progress and development.
• Identify and design support structures to students with SEN
• Work with school leaders and management team to plan and implement school-wide educational and recreational programmes
• Collaborate and consult with allied professionals, parents/caregivers and external agencies to ensure quality support and well-being of students
• Responsible for designing, assessing and reviewing student-centric lessons with engaging approaches to accommodate individual learning styles
• Advocate to Heads of Department appropriate instructional learning resources to value add to students’ learning
• Review and reinforce learning activities using lesson plans and teaching strategies to help students to master concepts and skills
• Implement the use of information technology in lesson preparation and teaching to engage learners
• Research and keep abreast of up-to-date subject knowledge and design teaching resources in professional learning teams
• Supervise students and manage pupil behaviours in the classroom and on school premises to inculcate school values and enforce discipline
• Document concerns of students to facilitate problem solving with parents and professional support staff
• Conduct Parent-Teacher Conferencing to discuss students’ strengths, weaknesses and identify areas of focus to support IEP goals and transition
• Provide information to parents for home-school communications to support students’ progress
• Make home visits for students with high support needs and craft intervention strategies to meet student social and emotional needs
• Establish work plan priorities to meet school strategic thrusts
• Actively involved in staff meetings, co-curricular activities, educational conferences, and school programs.
• Participate in parents' evenings and school-wide training events to promote home-school partnership.
• Participate in organizing school events, including sporting events, learning journey and other excursions like camping trips and educational tours

Job Requirements:

• Diploma/ Degree from recognised Institutions with GCE ‘O’ level credits in English and Mathematics
• Prior experience with Students with Mid Intellectual Disabilities (MID) is preferred
• Specific subject knowledge, knowledge in special needs education and behaviour modification, Microsoft office (Excel, Powerpoint, Word)
• Interpersonal skills, classroom management skills, takes Initiative, effective communication Strong in verbal and written English

Summary

The Team Lead will be responsible to the Head of Learning & Development for all coordination and conduct of functional training programs, management of standards and procedures for operations in his/her assigned business unit. The incumbent is responsible for the review, formulation and implementation of training plans and programs for in-house, industry, other regulatory courses for in order to achieve consistent, high quality service delivery for the respective business units.

Duties and Responsibilities

▪ Oversee all training in areas of development and delivery, and assessment and evaluation, and planning and communication in his/her business unit.

▪ Identify and assess the training needs of the job roles in consultation with stakeholders and in collaboration with the Curriculum Developer in his/her business unit.

▪ Design develops and review training and assessment programs/materials in collaboration with the curriculum developer in his/her business unit.

▪ Assess his/her training team members’ (comprising Trainers, Line Trainers and On-Job Trainers) training competencies and skills, performance and productivity to identify areas of development and growth.

▪ Coach his/her training team members to ensure consistent high standards and quality in training delivery.

▪ Establish effective working relationships and collaborations with internal and external stakeholders at various levels.

▪ Oversee evaluations of all training programs in his/her business unit and recommend strategies for continuous improvements.

▪ Conduct in-house training and briefing to share best practices as required and ensure compliance to regulatory training requirements for operations in his/her business unit.

▪ Keep abreast of industry training trends, developments, and best practices, and recommending new teaching/learning methodologies.

▪ Ensure compliance with all workplace safety, security, and health policies and procedure

Requirements

▪ Minimum in WSQ Advanced Certificate in Learning & Performance or ACLP/ACTA

▪ Minimum 5 years of demonstrable sound knowledge in operations.

▪ Minimum 2 years conducting training and assessment.

▪ Able to analyze, evaluate and assess learning challenges and develop new innovative learning solutions.

▪ Able to work independently and collaborate effectively as well as a self-starter with positive mindset.

▪ Excellent self-motivation, interpersonal, communication and project management skills.

▪ Ability to work well as both a team player and leader

Acting as a first point of contact between Management and clients.

. Screening and directing phone calls and distributing correspondence.

. Handling requests and queries appropriately.

. Managing calendars, scheduling, organizing meetings and appointments.

. Making travel arrangements.

. Organizing events and conferences.

. Reminding the management of important tasks and deadlines.

. Managing databases and filing systems.

. Implementing and maintaining procedures/administrative systems.

. Format information for internal and external communications – memos,

emails, meeting minutes

. To provide administrative support in the delivery of assignments and

initiatives as and when required

. To ensure all correspondence and relevant materials are produced in a

timely and accurate manner

Job Description

• Making sure that all customers deadlines are met; to ensure overall customer satisfaction
• Coordinate customers requirement with internal teams
• Able to handle our customers in various circumstances, even when they are being difficult
• Follow up closely on tight deadlines and ensure our teams can meet them
• Provide ideas and solution paths to customer and internal teams
• Meeting with customers and stakeholders where required to make communication easy and transparent regarding project issues and decisions in services
• Analysing new project / program risks and feedback to management
• Attend conference calls with US and / or Europe customers when required.
• Work on the costing provided by procurement team to provide quotations to customers
• Track quotations that are sent and follow up on open items / statuses closely
• Any other duties assigned by the lead from time to time.

Job Requirements:

• At least Diploma, Advanced/Higher/Graduate Diploma in Business Management, Business Administration or Sales & Marketing is preferred.
• At least 5 year(s) of working experience in related field is required for this position.
• Preferably Junior Executive specializing in Corporate Sales or equivalent.
• Working experience in Manufacturing Environment will be advantageous.
• Proficient in Microsoft Excel (VLOOKUP, PivotTable, etc.), Outlook, PowerPoint.

This is a 6-month contract role based in Singapore.

Main Responsibilities:

• Drive proactive paid/owned/earned storytelling across product and tech - which requires the hire to keep on top of product updates, shape comms strategies and narratives around these developments and then execute.
• Support executives in external engagements.
• Oversee our corporate communications review processes, including press room management, reporting and media relationship management.
• Provide support for key campaigns and media activities.

Must haves:

• Bachelor’s degree (no preference in field)
• Minimum 7 years of experience: Technology PR, media relations, crisis/issues management
• Experience working in a regional or global team in a fast-growth company
• Excellent command of English (written and spoken)
• Hands-on and motivated by challenging work

Good to have:

• Content marketing or integrated marketing experience would be a plus
• Consumer technology and Internet sector experience preferred
• Comfortable with data and able to translate it into information that is easy to understand

UEN: 199700895N

Job Description

Key Responsibilities

Supervise, Lead, motivate, direct, develop and train a team of production employees. Assigns work and sets priorities for employees. Provides technical expertise and managerial leadership. Effectively communicates daily crossovers and build/test issues across all levels of Manufacturing.

Prioritizes production schedules based on available manpower, equipment efficiency, capacity and materials requirements.

Leads operational meetings; establish consistency in processes, and ensure alignment of tactical and/or strategic plans. Develops and tracks key organization performance metrics to meet or improve cycle time performance. Schedules and conducts milestone meetings.

Ensures timely response to operations issues impacting customer satisfaction; acts as an interface in the establishment of and ensuring conformance to customer/vendor requirements; prepares detailed analysis of cost of quality opportunity and initiates corrective action.

Actively strives to prevent employee accidents and injuries. Responsible for ensuring and documenting that all department employees (including temporaries) receive and follow appropriate department training including Environmental, Health and Safety training. Implements, emphasizes importance of, and monitors compliance to appropriate safety policies and procedures.

Develops personnel to include training and career development; manages the performance management process to include the development of team and individual goals, implementing employee development plans, and coaching. Manages the employee selection, hiring, reward and discipline processes.

Analyzes and plans for maximum production capacity optimization; implements and monitors manufacturing or dept. processes that collect, analyze and report key measurement data and real time status.

Identifies process and quality changes designed to improve manufacturing or department capabilities. Drives Lean, Safety and Quality. Takes corrective action.

Other Requirements: This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Works on issues where analysis of situation or data requires review of relevant factors

Business Expertise

• Receives assignments in the form of objectives with goals and the process by which to meet goals. Recommends changes to unit or sub-unit policies. Management reviews work to measure meeting of objectives

Leadership

• Provides direction to employees according to established policies and management guidance. Administers company policies that directly affect subordinate employees

Problem Solving

• Exercises judgment within defined procedures and policies to determine appropriate action.

Impact

• Erroneous decisions or failure to achieve results will cause delays in schedules.

Interpersonal Skills

• Interaction normally requires the ability to gain cooperation of others, conducting presentations of technical information concerning specific projects or schedules.

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

COMPANY DESCRIPTION

With a capacity of around 430 beds, Peacehaven provides compassionate, individualized, holistic care to all without discrimination. We offer a comprehensive gamut of services to care for the sick, frail and elderly who have physical or mental disabilities with minimal or no appropriate caregiver support at home.

Peacehaven has also been awarded the bizSAFE level 4 status which affirms our commitment to safety and health standards at the workplace.

The Salvation Army, Singapore - Peacehaven Nursing Home

RESPONSIBILITIES

• Assist and support the nurses in the delivery of nursing care to the residents
• Assist in monitoring of vital signs
• Attend to the daily needs of the residents to ensure safety, comfort and well being of the residents
• Assist in the conduct of daily exercises for the residents
• Provide guidance to the Health Care Assistant and Health Attendant
• Maintain accurate documentation of care given
• Carry out any other duties as assigned by nurses

• Higher Certificate in Healthcare Support/Nursing Care/ITC in Healthcare/GCE N Level/Diploma in Nursing
• Able to work independently and communicate well with team

Working Hours

• 44 working hours per week (1days off per week according to roster)
• Shift duty according to the nursing roster
• Meal break: 30 minutes
• Tea break: 15 minutes

Work Location

The Salvation Army Peacehaven Nursing Home

9 Upper Changi Road North Singapore 507706

• Possess a valid Class 4 Driving License, with at least 1 year of relevant driving experience and a clean record
• To assist in daily operations, perform the delivery job in a professional way
• Ensure all deliveries are conducted in a safe and service-oriented manner to the designated location.
• Handling packaging and warehouse operations, Shifting products from location to location
• Good working attitude and commitment to work, hardworking and responsible.
• Physically fit, as loading and unloading are required.
• Conduct daily check to ensure that vehicle is in good and safe condition.
• Maintained and upkeeped vehicle at all times
• Undertake any other duties assigned by superiors.
• Able to work long hours/weekends and public holidays

Email resume to: [email protected]

Responsibilities:

HR

- Oversee and implement strategic manpower planning initiatives.

- Manage recruitment processes, onboarding, and resignation procedures.

- Maintain staff and leave records.

- Process staff claims and handle benefits administration.

- Implement performance appraisal processes twice a year.

- Manage union relations

Finance

- Review monthly journals, provisions, and financial statements.

- Handle internal and external audits

- Administer GST, corporate tax submission, and withholding tax calculation.

- Prepare and review quarterly/yearly/5 years forecast.

- Submit budget to Board of Directors for approval.

- Analyze budget vs. actual results regularly.

Engineering Management:

- Troubleshoot basic mechanical/structural/payloads/systems problems.

- Support Engineering department and project team goals.

- Coordinate with other departments as necessary.

- Utilize internal drawing/document standards and interpret OEM airplane installation drawings.

Requirements:

- Qualified degree in Engineering/Finance, or related field.

- Fluent in Japanese for effective communication with offices in Japan.

- Knowledge of engineering principles, design, and practical application.

- Proficient in reading and understanding Computer Aided Design (CAD) designs.

- Finance and human resources skills are essential.

Key Responsibilities

• Design, collect data, analyze and compile reports on a variety of difficult process engineering experiments, within safety guidelines
• Perform hardware characterization on a variety of difficult systems, within safety guidelines
• Troubleshoot a variety of complex problems, perform Root Cause Analysis and resolve a variety of difficult process engineering issues
• Generate internal and external documentation for products, presentations and technical reports
• Interact with customers to resolve a variety of difficult process engineering issues/problems with limited supervision
• Measure film properties and interpret data
• Identify, select and work with vendors and suppliers with limited supervision
• Implement new technology, products and analytical instrumentation

Requirements

• Master’s or PHD degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience with Plasma Etch process development
• ​Bachelor with 5+ years relevant working experience

Working Location

• Science Park II

Job Description & Requirements

• Collect and analyse air samples from indoor and outdoor environments, or collect and study multiple types of sources at multiple locations.
• Test samples that have been previously collected in a laboratory environment using specialized equipment and procedures.
• Set up, calibrate, stock and utilize laboratory equipment and consumables as and when required.
• Maintain regular calibration of sampling and/or laboratory equipment.
• Record accurate sampling observations and data to provide to management
• Work independently with minimal supervision or closely with a team of individuals across various disciplines or seniority levels.
• Keep detailed data reports of all sampling information collected.
• Thoroughly understand various sampling methods and how different methods can obtain different results.
• Any other duties as assigned by Supervisor
• Possess Class 3 Driving License (not mandatory)

Requirements:

• Diploma/Degree in Environmental Science, Facilities Management, or related qualifications
• Environmental engineering, Lab Environment, Environmental Science, Analyzing Information, Equipment Maintenance
• Attention to Detail, Research Skills, Reporting Research Results, Environmental Law, Site Development, Sales, technical reporting and consultancy.

Job summary (F&B Sales Department)

1) Responsible for the sales objectives set by the company.

2) Work cohesively with the F&B Sales team.

Area of responsibilities

1) Sector – Food & Beverage (Cafes, Central Kitchen, Distributors, Restaurants, etc) and Hospitality (Hotels, etc).

2) Achieving the sales target set by the company.

3) Responsible for bringing in new customers and making appointments.

4) Responsible to handle customers enquires, direct marketing and contract review activities.

5) Realising the maximum account potential of company’s customers. (Example: Promote new products, upsell more items).

6) Minimise the incidences of lost customers to competition.

7) Work cohesively with Indoor Product Specialist to increase sales target.

8) To update the company on all customer’s feedback on products / services.

9) Attend to the urgent deliveries requested by the customers.

10) Any other area of responsibilities that the company deems necessary.

Competency requirements

1) Class 3 License

2) GCE ‘O’ level.

3) Communication skills, Outgoing personality.

4) Prior B2B sales experience.

Working Hours
Monday - Friday : 8 30am - 5 45pm (1 Hour Break)
Saturday: 8 30am - 2 30pm (1 Saturday Shift Every 4 Weeks)