About the Job

New Life’s VM Team plays a vital role in building up the capability of the organisation’s ability to network, engage and retain its volunteers.

As a Volunteer Management Executive, you are a vital co-labourer and co-creator in the Team’s effort in creating a volunteer friendly culture within New Life where fulfilled volunteers are fulfilling needs.

Responsibilities

- Participate in Conceptualise, Plan and Develop strategies to build deep friendships with partners and foster collaborative relationships with internal and external stakeholders.

- Design and implement volunteer management systems and processes to network, match and engage volunteers.

- Manage the roll out of volunteer training programmes to strengthen capability, support aspirational and motivational needs, and create buy-in.

- Work closely with departments to coordinate volunteer contributions on both department and organisation-wide levels.

- Effectively handle communications with volunteers and internal departments on various platforms to optimise engagement and coordination.

Requirements

- Diploma, Degree or equivalent in any discipline

- Proficiency with Microsoft Office Suite with basic IT knowledge and skills

- Able to work outside office hours on occasion, willing to move about the island and possess the resilience to handle challenges.

- Attention to detail and accuracy

- Resourceful and innovative while being able to see big-picture.

- Ability to build good working relationships with stakeholders, collaborating at all level

- Understanding of Social Service or non-profit Sector will be an advantage

Job Requirements

1) To work as supporting Process Design Engineer to Project Lead Process Design Engineer

2) To co-ordinate with Process Designer to Prepare PFD & P&IDs

3) Perform Hydraulic calculations, surge analysis, Wastewater calculation, Firefighting calculation

4) Perform Tank Venting Calculation as per API 2000

5) Perform TRV and PSV Sizing Calculation as per API 520 & API 521

6) Prepare Tank Operating Level Calculation

7) Prepare Heat & Material Balance

8) Perform Heat Transfer Calculations

9) Prepare Material Selection Diagram

10) Prepare Process Line List, Product Data sheet

11) Participate in HAZOP / SIL Study and close out HAZOP / SIL Action sheets

12) Prepare Design Basis & System Description

13) Prepare Pollution control report and Fire safety report

14) Perform Tank emission calculation

15) Prepare Process data sheets for Equipments like pumps, Heat Exchangers, Refrigeration unit, Flare, Boilers, Oil Water Separators, Vessels

16) Prepare Process data sheets for Instruments like control valves, MOVs, Pneumatic actuators, Level Transmitters, Pressure Transmitters, Temperature Transmitters, Flow meters etc.

17) Prepare Process Control Philosophy & ESD Philosophy

18) Prepare Cause & Effect Diagram

19) Prepare Commissioning Procedure & Operation Manual

20) Review Vendor Documents for Process related information

21) Review Plot Plan, Piping Layout, Instrument Data Sheet, Equipment Data Sheets for Process related information as Inter Discipline Check

22) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

23) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word, MS Power Point

3) Smart Plant P&ID

4) Autocad

Code Knowledge

1) API 2000, API 520, API 521, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Qualification

Bachelor of Engineering (Chemical)

Experience

4 years to 7 years

* Only Shortlisted Candidates Would Be Notified.

The candidate is to follow the lorry or truck driver and assist the driver in the delivery and collection of cargo.
The candiate needs to be able to lift and carry cargo from lorry or truck and do door to door deliveries.

Job reporting location is in Jurong Logisitics Hub and upon ending of work, the driver will drive the candiate back to Jurong Logisitcs Hub.

Monday to Friday : 9 am to 6 pm ; Sat: 9am to 1 pm.

Salary Range: $1,600 to $1,800

Transport Allowance: $100.

We are an equal-opportunity employer and value diversity among our teachers, staff and students.

At One World International School (OWIS), we are looking for passionate, adaptable educators who enjoy teaching students from diverse cultures. OWIS provides an individualised approach to learning that nurtures every aspect of child development. In addition to versatile learning spaces and a variety of extracurricular activities, we offer rigorous curricula that prepare students to be future innovators and leaders. We're an IB Primary Years Programme (PYP) World School, a Cambridge International School and an IBDP School. All teaching positions require a high proficiency in spoken and written English, a degree, teaching qualifications and ICT literacy.

The Secondary Instructional Coach will work as a colleague with classroom teachers to support student learning in all content areas. The Instructional Coach will focus on individual and group professional development that will expand and refine the understanding of research-based effective instruction. In order to fulfil these expectations, the Instructional Coach will provide personalised support that is based on the goals and identified needs of individual teachers in support of the school’s action plans.

Reporting Relationships

• The Secondary Instructional Coach reports directly to and is supervised by the Head of Secondary.
• The Secondary Instructional Coach collaborates with the Secondary Teaching and Learning Coordinator, the IBDP Coordinator, and the Secondary Pastoral Care Coordinator.
• The Secondary Instructional Coach has a collegial relationship with teaching staff and refers any performance or professional issues regarding teacher performance to the Head of Secondary.

Essential Responsibilities

• Motivate and facilitate the professional development of teachers.
• Communicate and demonstrate research-based instructional practices that result in increased student performance. Model lessons when appropriate.
• Communicate and demonstrate research-based instructional practices that result in improved classroom environments.
• Encourage professional growth and provide organised, individual and/or group learning opportunities for teachers.
• Assist teachers with designing lesson plans and learning activities. Assist with reviewing lesson plans and provide lesson plan feedback to teachers.
• Assist teachers in creating instructional materials that are in alignment with curriculum.
• Regularly conduct informal classroom observations and provide feedback to teachers.
• Assists with the development of new teachers.
• Facilitate professional learning communities.
• Assist teachers with collaborative lesson planning.
• Assist teachers with adapting instruction based on formative and summative assessment results.
• Help teachers make instructional decisions based on culturally responsive practices.
• Assist teachers with specific classroom activities when requested.
• Provide support for student motivation and management strategies.
• Support teachers with software products and classroom/curriculum related technologies to support teaching and learning.
• Provide support in analysing student assessment data.
• Support, implement and assess new programmes and initiatives aimed at improving instruction.
• Ensure the OWIS Secondary Learning Principles are implemented effectively in the classroom.
• Ensure the OWIS Essential Skills are taught and assessed.
• Ensure the IB Learner Profile attributes are explicitly developed in the classroom.
• Participate in teacher goal/plan setting and evaluation.

Additional Responsibilities

• Create positive relationships with teachers and administrators.
• Communicate effectively with all members of the school and community.
• Demonstrate a thorough knowledge of curriculum and subject matter.
• Participate in action planning and work towards the school’s goals.
• Provide assistance in researching instructional and/or curriculum topics.
• Manage time and schedule flexibility that maximises support for teachers and improvement of student learning.
• Work positively toward continuous school improvement.
• Attend workshops/conferences to learn about new and innovative instructional strategies.

Requirements:

• Minimum two (2) years or more relevant full-time teaching experience as a qualified teacher ( is a must). Teaching qualification certificate is required.
• Must have strong knowledge and experience of subjects for Secondary, IGCSE and IBDP level.
• Experience in an international school environment (preferred).
• Preferred to be able to speak Spanish is an advantage.
• A passionate educator with the ability to deliver inquiry based learning.

Work Location: Jurong West (Nanyang Campus)

Mandatory Skills

Responsibilities

• Part of the team that build and maintain banking applications.
• Design and build applications using C#, .NET
• Collaborate with cross-functional teams to define, design, and ship new features.
• Implement core practice of Agile, continuous integration/continuous delivery, in an on-premise or public-cloud environment, where everything is automated.
• Work on bug fixing and improving application performance.
• Continuously discover, evaluate, and implement new technologies to maximize development efficiency.
• Work closely with the operation team to develop or enhance features in an agile environment based on requirements from the business team.
• Maintain high standards of software quality within the team by following good practices and habits while delivering solutions on-time and on-budget.
• Should be able to deliver consistent results and scale on new technologies faster

Requirements

• Degree in Computer Sciences or Engineering
• 5 years of proven software development experience. Good experience in design and build micro-services.
• Solid hands-on experience of on C# and .NET
• Good knowledge on relational database, MariaDB, MSSQL.
• Knowledge of build tools Maven and DevOps environment using tools such as Git (Bitbucket), Continuous Integration (Jenkins) and Continuous Deployment. Working with code quality tools such as Sonar, Fortify or NexusIQ will be advantageous.
• Strong experience in agile methodologies and test-driven development.
• Understand the fundamental design principles behind a scalable application.
• Ability to build highly re-usable, performance optimized services.
• Codes with security and data protection.
• Knowledge of working in an agile environment using tools such as Jira

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently offer the following position in our office in Singapore which will be onsite.

Overview

Responsible for directing the manufacturing operations performed in a shift or group of production lines, ensuring they reach volume, quality and cost goals. Controls production activities, material flow, and inventory to achieve cost and quality targets and production schedules of the assigned production line(s). Ensures compliance of standards. Responsible for the management and supervision of the assigned production line(s). Lead a team comprising individual professional to meet quality, cost, delivery and responsiveness requirements.

Responsibilities

Production Output

• Lead the team and work closely with supporting departments to meet production KPIs (Safety, Quality, Delivery, Inventory & Productivity), including Absorption.
• Chair the DM of SQDIP and Build Plan at Gemba
• Drive the daily top technical issues closure with engineers.
• Lead & resolve material issues (quality or availability) with the respective engineers or buyers
• Review operations and confer with technical or administrative staff to resolve production problems.

Team management

• Plan and organizes manpower and equipment to maximize productivity to meet production targets, included redeployment and OT management.
• Ensures Good documentation (GDP) is followed within the production.
• Supervises co-ordinates and monitors the performances of employees under charge
• Induct new hire and conducts performance appraisal for employees and is responsible for making decision on termination, promotion, upgrading etc.
• Develops and implements training programs to improve performance of employees. Ensures employees training compliance.
• Institute continuous improvement culture to improve the quality of workmanship standards.
• Maintain work area 5S & safety.
• Ensure the department operates under the Quality Management System and Environment, Health & Safety (EHS) requirements and to address EHS issues raised by associates.

Production Cost

• Lead in lean and continuous improvement initiatives and projects.
• Assists production manager in achieving goals and efficiency.
• Review build plan to make decision on resource deployment, inventory requirements, and work closely with Planner to meet the sale orders.
• Maintain equipment and tools calibration.

Requirements

• Diploma in Engineering/Manufacturing or equivalent field
• Minimum 2 years of supervisory experience, preferably in a medical device company with knowledge of Good Manufacturing Practice
• Advance Skill in MS Office
• Problem-solving skills
• Language proficiency in English and Chinese (need to communicate with chinese speaking associates)

What We Offer

• Equal pay is a given for us.
• Learn all there is about Kaizen, PSP's and Muda as part of our Danaher Business System (DBS) trainings - if you believe in continuous improvement like us.
• We have no room for prejudices and stereotypes. We promote equal opportunities, diversity and inclusion.
• We offer a balance between support and autonomy to achieve your own goals in an international environment.

Get More Insight

Learn more about what we do and who we are by watching our company video “We Are Leica”: https://www.youtube.com/watch?v=1zHmalqMXN4

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

Warehousing

Inventory management

Stock

Microsoft Office

WMS

Warehousing

Inventory management

Stock

Microsoft Office

WMS

Warehousing

Inventory management

Stock

Microsoft Office

WMS

Warehousing

Inventory management

Stock

Microsoft Office

WMS

Warehousing

Inventory management

Stock

Microsoft Office

WMS

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

·

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

You will be part of the Inspection Service Business Unit that provides inspection and assessment on petrochemical and chemical plants pipelines for refineries, storage tanks and off-shore platforms.

Key Responsibilities:

• Perform internal and external inspections to ensure that the acceptance criteria of a specific code, standard or document are met
• Interpret regulations, codes and industry standards
• Perform inspection/NDT as required by job assignment
• Maintain equipment assigned to ensure that it is in good working condition
• Recommend and approve repairs and perform visual inspection of completed work
• Write detailed inspection reports and maintain documentation of inspections
• Compile and submit daily reports, inspection reports, and inter‐office communications in a timely manner
• Maintain positive relationships among all stakeholders: client, facility, customer and coworkers
• Provide training and guidance to junior inspectors
• Complete all required training, including tests, within Company guidelines
• Prepare risk assessment before commencement of work and ensure that all safety policies and procedures are strictly adhered to

Key Requirements:

• Good knowledge of pressure equipment /piping/ tanks manufacturing Code, like ASME, API
• Able to interpret NDT (radiography, UT, PT, MPI) results
• Able to review the working procedures, ITP
• Have good knowledge of welding processes
• Experienced with pre -turnaround, shutdown preparation inspections.
• Have good knowledge of materials and pipes/equipment used in the refinery and their damage mechanism including CUI
• Have good interpersonal communication skills in the execution of the piping inspection duties
• Be able to perform QA of all piping/equipment repair work and liaise with contractor/ sub contractor, NDT teams ,maintenance & operation personnel
• Able to assess the risks and hazard related to each job activities and comply with all safety regulations in the plant without fail.
• Observe working time and be expected to work overtime
• Observe company procedure, statutory requirements in executing inspection of piping, equipment and repair work
• Identify piping/Equipment from PFS, PEFS or GA drawing
• Read piping on Isometric drawing and understand the dimension, material, piping component, process condition
• Read equipment drawing and understand size, thickness, material, component, process condition
• Review and summarize the inspection history, sort out the inspection focus areas
• Plan inspection work on daily, weekly and monthly base and report progress to engineers
• Preparation for field inspection with necessary drawing, check list and tools
• Follow site safety rules and regulations strictly
• Physical thorough inspect piping, components at site for both external and internal corrosion of piping and equipment
• Determine the severity of corrosion/damage – remaining thickness, and size and pattern of corrosion
• Identify area and location for NDT, and liaise with NDT contractors, review and compile all NDT reports in an accurate and concise manner
• Monitoring the quality and productivity of work done by NDT team and ensure that it is in accordance to correct work procedures
• Obtain operation condition from operation and process technologist
• Calculate corrosion rate and remaining life
• Recommend for maintenance and repair work with clear scope
• Provide quality assurance for maintenance and repair work and assure it is done as per quality requirement/ITP, Code/Standard requirement
• Supervise other special inspection work, such as abseiling, drone inspection or remote visual inspection as required
• Draft proper inspection report and keep all inspection records in a systematic and timely manner
• Set the recommended next inspection interval and scope.

Reporting to the Product Manager, you will perform laboratory evaluation and analysis of Food and Pharmaceutical samples to ensure compliance with international standards.

Key Responsibilities:

• Work with a team of chemists and technical executives to conduct laboratory evaluation and analysis of food and pharmaceutical samples
• Develop competencies and maintain currency in food and pharmaceutical testing and analytical instrumentation
• Review test data and prepare test/verification/validation reports
• Verify, validate and/or perform method transfer of analytical methods
• Interface with customers on sample submissions, job status as well as their enquiries and quotations
• Oversee the proper upkeep of the laboratory and maintenance/qualification of analytical instruments
• Commit and participate in laboratory quality assurance and workplace safety activities to ensure compliance to quality and safety requirements
• Any other duties assigned by the manager and management team

Key Requirements:

• Bachelor’s Degree in Chemistry or its equivalent with preferably 1 year of hands-on working experience in laboratory
• Experience in operating HPLC, GC, LC-MS/MS and UV-Vis spectrophotometer preferred
• Familiarity with ISO/IEC 17025 and cGMP quality management system is advantageous
• Good communicator and team player with strong interpersonal skills
• Good problem-solving skills with attention to details
• Ability to work under pressure with tight deadlines
• Enthusiastic and resourceful with a “can-do” attitude

Reporting to the Product Manager, you will perform microbiological analysis of food, water and pharmaceutical products to ensure compliance with international standards.

Key Responsibilities:

• Perform microbiological analysis of food, water and pharmaceutical products to ensure compliance with international standards
• Perform sampling on food and water at food-service establishment, etc
• Assist to develop and validate new test methodologies
• Prepare test reports as well as perform other related administrative work
• Maintain and upkeep test equipment and instrument to ensure compliance with laboratory quality management and safety guidelines
• Other laboratory tasks as assigned by the Supervisor

Key Requirements:

• Higher NITEC or Diploma in Food Science / Biomedical Science or its equivalent
• Candidates with relevant working experience in Microbiological Testing laboratories and familiarity with ISO 17025 quality management system will be an added advantage
• Results and service-oriented individual who possesses initiative and good communication skills
• A proactive team player but with the ability to work independently in challenging projects and timelines
• Enthusiastic and resourceful with a "can-do" attitude

You will be part of the Product Certification team that review and certify building construction related products, ensuring that they comply with the relevant safety, performance standards and regulatory requirements.

Key Responsibilities:

• Review and process applications for approval of fire safety products (e.g., fire rated door; fire resistant system and building material) to ensure compliance to safety, performance standards and regulatory requirements
• Make informed decisions on granting the relevant certifications based on the evaluation of:
• Product test reports
• Manufacturer’s quality assurance process flow and quality system
• Factory and site inspection reports
• Liaise with regulators on clarification of legislation requirements and certification standards

Key Requirements:

• Bachelor’s Degree or Diploma in Mechanical Engineering or any relevant fields with at least 2 years of relevant experience in construction or manufacturing environment or in testing of building construction products
• Possess relevant knowledge of technical standards for construction products such as fire safety materials; fire rated door will be an added advantage
• Knowledge of quality system and experience in applying ISO IEC 17025/ISO17065 will be an added advantage
• Excellent verbal and written communication skills
• Proactive team player with the ability to work independently in challenging projects and timelines
• Meticulous, efficient, enthusiastic, and resourceful with a "can-do" attitude
• Highly service-oriented with good people engagement skills

Assistant Cook Job description

The assistant cook will prepare meals and follow establishment recipes. Duties include preparing ingredients, adhering to the restaurant menu, and following food health and safety procedures. Cook, clean, assist other cooks and staff and deliver food in a fast-paced environment. Work may include operating a grill, oven, or fryer. Previous experience in a team environment and various cooking methods preferred.

That prata master need to play as multitasking role, candidate must be ready for flour mixing as well as making prata

Duties and Responsibilities

• Setting up, cleaning, and organizing work stations

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Roti prataflour mixing

• Making Varieties of RotiPrata (egg prata, Bananprata, coin prata,etc.,)

• Making Varieties of Dosai (Masaladosai, Ravadosai,Plaindosai, specialdosai,Geedosai. etc.,)

• Making Chappathi and Chappathi flour mixing

• preparation of south indian& north indian curies

• Taking orders from wait staff or computerized system

• Cooking order according to food health and safety standards

• Recommending ideas for specials or seasonal dishes

• Handling multiple food orders at one time

• Monitoring multiple food orders as new orders arrive

• Dressing order for presentation

• Ensuring each guest order has the correct food and sides

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

• Assisting other cooks in preparing food or helping other team members when needed

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• High school degree or equivalent

• Previous experience as a busboy, cook, or relevant work experience

• Legally able to work in establishments which serve alcohol

• Able to work early mornings, nights, and weekends

• Must pass a background check

• Able to read and write

Key Responsibilities:

• Provide test services and technical advice to customers on cable products
• To interpret test methods/procedures and exercise sound judgement on the methodologies as well as results
• Collaborate with vendors and other departments to resolve engineering issues or testing requirements
• Coordinate with clients, suppliers, and sub-contractors to ensure smooth execution of projects
• Continue to build up technical and engineering expertise in the field of electric cable testing
  

Key Requirements:

• ITE/Diploma in Electrical/ Electronics/ Mechatronics Engineering or related studies
• Candidates with no prior experience are welcome to apply
• Familiarity with ISO 17025 standards with prior experience in quality control and the test industry will be an added advantage
• Result and service-oriented individuals who possess strong interpersonal and communication skills, with the ability to interact with all levels of staff
• Proactive team player but with the ability to work independently in challenging projects and timelines
• Enthusiastic and resourceful with a “can-do” attitude
• Be prepared to take on short-term travel within ASEAN region
  
  

Job Responsibilities:

• Support the Workshop Manager in managing the Taxi Maintenance operations and ensure all KPIs are met.
• Ensure operation costs including but not limited to material, manpower and operating are kept within the operation budget.
• Review and enhance the existing systems without compromising quality or service while optimizing cost.
• Manage and ensure smooth day-to-day operations.
• Produce statistics and reports, to review performance and recommend procedural enhancement for discussion
• Establish, implement and monitor safe working practices and procedures.
• Perform routine safety inspections on equipment and sites to ensure workshop conforms to all health & safety regulations.

Job Requirements:

• Degree holder in Mechanical / Electrical / Electronic Engineering discipline or equivalent qualification
• Minimum two years experience in operations environment in Automotive Industry
• Able to build effective relationship with cross-divisional teams
• Proven tactfulness in communicating with others and constructively resolve challenges
• Excellent interpersonal and communications skills

The Candidate should be able to perform the following tasks,

· To monitor the installation progress as well as coordinate with Clients, Consultants, Subcontractors to ensure efficient and timely delivery of assignments.

· To report and monitor the progress of the project to the Project Manager.

· To supervise and ensure works are in accordance with the contract drawings and specifications.

· To prepare method statements, shop drawings, installations / T&C check sheets, work progress reports, and other relevant documents for M&E-related works with project teams.

· To coordinate with subcontractors and consultants on preparation and submission of shop drawings.

· To assist the Project Manager to negotiate/procuring materials, equipment, and labor in accordance with (or below) the allocated approved budget.

· To hold technical discussions with various stakeholders to resolve technical / site issues.

· To have experience in working at Data Centre.

· Mechanical: Familiar with VAV / VRV / cooling tower / Chillers / chilled water pipe / A&A works.

· Electrical: Familiar with retrofit / renovation / lighting control / BMS

Requirements

The candidate should also be experienced with the following.

· Building Automation Systems (Extra Low Voltage (ELV)

· Navisworks

· Knowledge on Revit will be an added advantage

· Microsoft Office

Temasek Laboratories@NTU is looking for a candidate to join them as a Research Scientist.

Key Responsibilities:

• Conduct evaluation of state of the art embedded microcontroller and associated cryptography algorithms
• Develop and test research methods on non-invasive and semi-invasive aspects of hardware security including but not limited to: post-quantum cryptography, Embedded Security, IoT security, Hardware Forensics etc
• Responsible for device setup, device testing, data analysis and reporting
• Publish in top international venues for optimal communication of our research

Job Requirements:

• Minimally Master’s degree in Electrical / Electronic / Computer Engineering or equivalent
• Applicants with PhD preferred
• Prior experience in working with embedded systems is required
• Prior experience with coding and evaluation of cryptography algorithms like post-quantum cryptography is required
• Coding background in either of C/Java/Assembly/Python/VHDL for analysis is required
• Creative, curious, self-motivated and a team player with good analytical and problem-solving skills

We regret to inform that only shortlisted candidates will be notified.

- Financial expert with knowledge in construction operations.

Roles and Responsibilities:

· Monitor and manage day-to-day financial operations of construction projects.

· Maintain and manage costing on construction projects financials, cost centres, job costs, and material costs and required costs for ongoing construction projects.

· Decision making on project budgets and manage the project financing.

· Manage cash flow and forecasting.

· Implementing cost control measures together with process improvements.

· Generating reports and proposals for budgeting requirements

· Attention to detail and analytical approaches.

· To maintain excellent relationship with project teams.

· Conduct in-depth reviews and analysis of all project or contract documents to be familiar with every detail or requirements.

· Assist in the maintenance, development, and enhancement of the company’s relationship with trade partners and contractors in a bid to produce strategic partnership.

Requirements:

· Minimum two years’ experience in construction sector or equivalent.

· Diploma or Degree in Business Management or equivalent.

· Good communication and leadership skills.

· Ability to work as a team and perform individually when required.

· Ability to be proactive and good in forecasting and planning.

A Research Fellow position is available in the Centre for Information Sciences and Systems, School of Electrical & Electronic Engineering, Nanyang Technological University, Singapore.

Job Description:

• To manage the project and work with project partner to achieve the project objectives.
• To design the system set up for channel measurement
• To perform experiments and data collection
• To perform simulation of realistic environment and experimental environment
• To perform data analysis and channel modelling
• To perform administrative work related to the project
• To help perform demo for the project
• Other matters relating to the project

Job Requirements:

• Candidate should have a minimum of a PhD degree in Electrical and Electronics Engineering or related field
• Basic knowledge of channel modelling, wireless communications and wireless positioning
• Keen on performing research and writing research publications
• Able to perform programming in Matlab, Phyton etc

We regret that only shortlisted candidates will be notified.

Responsiblities

• Manage construction activities and progress independently.
• Supervise and lead a team of workers and sub-contractor to perform on site work.
• Resolve design site problems encountered during the construction period.
• Prepare daily progress report,work schedule and worker schedule.
• Able to understand structural drawing, specifications and requirements.
• Monitoring and control of contract works to ensure compliance with technical specifications, code of practice, scope of work and to enforce safety regulations.
• Perform onsite installation, troubleshooting, repair, routine checks and maintenance.
• Responsible for general electrical fitting work.
• Other work-related duties as and when required.

Requirements

• Good knowledge of reading specifications and building drawings.
• At least 5 Year(s) of working experience in the related field is required.
• Experience with track records in A&A projects would be an advantage.
• Good team player, keen desire to learn, contribute, advance and progress with the company

When submitting a job application, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities.

2. Current and Expected salary.

3. Reason for leaving.

4. Date of availability.

5. Education background

6. Recent Photo

• Assign duties and monitor the work progress.
• Direct, supervise and troubleshoot the daily activities.
• Train work crews necessary to successfully complete jobs.
• Ensure M&E works are carried out according to specifications/drawings.
• Inform Project Director / Project Manager on any technical / site problems pertaining to M&E works.
• Supervise the progress of M&E works on site.
• Coordination of M&E work and ensuring the work is on schedule.

**Position Overview:**

The IT Support Engineer is a key member of the IT department responsible for providing technical assistance, troubleshooting, and support to end-users within the organization. This role involves resolving hardware and software issues, setting up and maintaining systems, and ensuring smooth technology operations to enhance productivity and minimize downtime.

**Key Responsibilities:**

1. **Technical Support:**

- Respond to user inquiries and technical issues via phone, email, or in-person promptly and professionally.

- Diagnose and resolve hardware, software, and network-related problems efficiently.

- Provide step-by-step guidance to users on issue resolution or workaround solutions.

2. **End-User Assistance:**

- Assist users with software installations, updates, and configurations.

- Educate users on best practices for using hardware, software, and applications effectively.

3. **Hardware and Software Maintenance:**

- Install, configure, and maintain computer systems, laptops, printers, and peripherals.

- Perform regular updates, patches, and security measures on software and systems.

- Troubleshoot and repair hardware components as needed.

4. **Network Support:**

- Troubleshoot network connectivity issues, both wired and wireless.

- Assist in setting up and managing network devices, such as routers, switches, and firewalls.

5. **System Administration:**

- Maintain user accounts, permissions, and access levels.

- Assist in the administration of servers, domains, and other IT infrastructure.

6. **Documentation and Reporting:**

- Maintain accurate records of support requests, resolutions, and actions taken.

- Provide reports on recurring issues, trends, and improvements to management.

7. **Remote Support:**

- Provide remote assistance to off-site users, ensuring their technical needs are met.

8. **IT Projects:**

- Collaborate with the IT team on various projects, such as system upgrades, migrations, and implementations.

9. **Training and Knowledge Sharing:**

- Conduct training sessions or workshops for users to enhance their IT skills and knowledge.

- Share technical knowledge with colleagues to foster a learning culture.

**Qualifications:**

- Bachelor's degree in Information Technology, Computer Science, or related field (or equivalent experience).

- Relevant certifications (e.g., CompTIA A+, Microsoft Certified: Azure

Fundamentals) are advantageous.

- Proven experience in providing technical support and troubleshooting.

- Strong knowledge of hardware, operating systems (Windows, macOS), and common software applications.

- Familiarity with network fundamentals, including TCP/IP, DNS, DHCP.

- Excellent problem-solving and communication skills.

- Customer-oriented approach and the ability to work well with end-users.

- Ability to work independently, manage priorities, and meet deadlines.

- Adaptability to changing technologies and environments.

**Benefits:**

include competitive salary, a dynamic work environment.

Senior Customer Service Executive

We are at the heart of every place that matters: as a leading global provider in the access solutions market, we enable people to move seamlessly in safe, secure and sustainable places.

Do you want your work to matter? Then join our team!

At dormakaba, more than 16,000 people from all over the world work together and grow together. If you are looking for exciting career prospects, if you want to fuel innovation and like tackling new challenges, then we would love to hear from you!

Our Singapore Service team is always on the lookout for talents and help you reach your best potential! Check out what our people shares about Service opportunities!

https://youtu.be/GATcN16lJWM

Objectives

The Senior Customer Service Executive is responsible for leading a team of service specialist, delivering exceptional service to the assigned customers and is able to deliver and exceed customers expectation of all the after-sales services.

Roles & Responsibilities:

• Lead and manage a team and to ensure all services are being delivered promptly.
• Review, improve and implement processes to ensure best practices are in place.
• Provides shared support to Sales and Operations team.
• Handle customer calls and emails enquiry.
• Perform administrative duties such as quotations, invoices, scheduling appointment and reports.
• Coordinate with Warehouse to prepare materials and equipments to meet delivery KPI (key performance indicators) .

Key Competencies

• Good communication and coordination skills to enable interaction with internal and external customers effectively.
• Good knowledge and application of Microsoft Office.
• Strong coordination skills
• Strong attention to details
• Able to lead and manage a team

Qualification:

• Diploma/Degree in Business Administration/Engineering or equivalent discipline.
• Minimum 2-3 years of relevant working experience

Benefits:

• Learning culture where every employee is engaged in learning and development growth.
• Team programs and activities that celebrate individual and team’s success.
• Learning culture where every employee is engaged in learning and development growth.
• Company transport is provided (pick-up points: Boon Lay & Serangoon).

Access your career at dormakaba today!

Job Description:

• Responsible for IT Infrastructure setup, maintenance and operations
• Provide end user support on desktop/ laptop/ printers/ networking and software. Engaged with user by IT request form for the new/ replacement of IT hardware and software installation & configuration, troubleshooting and setup
• Ensure security of data, network access and backup systems
• Good knowledge in network and servers security and problem solving
• Develop, implement and coordinate systems, policies and procedures
• Handle IT projects and system implementation which involve gathering information, designing and planning. Conduct User acceptance test and provide user training
• Manage and liaise with external system vendors such as Sage ACCPAC, ParaDM and HR Payroll system
• Provide advice and recommendations to management on process and techniques for improved work operations
• Handling all the IT functions of the Company and its subsidiary, which are located in Singapore and Malaysia respectively

Requirements:

• NITEC/ Diploma in Information Technology or equivalent
• Strong technical and analytical skills
• Basic networking skill preferably able to setup and troubleshoot
• Able to plan and work independently with minimal supervision
• Positive attitude towards learning and performing hands-on technical work
• 2 to 3 years of support experience in manufacturing sector would be an advantage

Job Description

• To provide internal technical support, answering support queries either onsite or via email
• Setting up e-mails for staff requirement
• To perform monthly system health checks and reporting
• To configure/trouble network managed switches
• To provide support on Microsoft 365 solution
• To implement and configure new tools, fix bugs, and assist staff to use IT systems
• Provide IT/End user support (Setup and deploy computers, IT equipment, software, patches, troubleshooting and etc.)
• Incident Management workflow, including appropriate and timely escalation
• Initiate 3rd party vendor support requests if required
• Identify and resolve any IT problem that arises
• Other ad-hoc duty instructed by IT Manager

Job Requirements

• Minimum Higher Nitec or Diploma in Information Technology, Computer Science or relevant
• Fresh Grad / Entry Level / Any work experience as a Technical Support Assistant, Desktop Support Assistant, IT Help Desk Technician or similar role.
• Ability to diagnose and troubleshoot basic technical issues etc.
• 3-months renewable contract basis.
• 5 days work week.

Others

• Annual Leave / Medical & Dental Benefits after 3 months with Company.
• Transport available near Boon Lay MRT.
• Lunch provided.