Job Description

• Report to the maintenance supervisor.

• Inspect machinery, buildings, electrical systems, piping, and equipment to ensure safe, well-maintained conditions, identify hazards, defects, and the need for adjustment or repair.

• Perform troubleshooting and repairs to the issues identified.

• Perform routine preventive maintenance (oil change, filter replacement, cleaning, bearing etc) to identified equipment/facility.

• Install new machinery, equipment, piping or structure.

• Complete maintenance work orders as assigned and in a timely manner.

• Operate a variety of machinery, equipment and tools including saws, drills, grinders, welding machines, drill presses and various hand tools.

• Maintain inventory of tools, supplies, spare parts, consumables and equipment; recommend tools, supplies, and equipment for purchase.

• Basic ability to read, interpret and work from blueprints, drawings, procedures , or oral instruction on machinery, equipment, piping system or project.

• Install or replace electrical contacts, panel, relays, plugs, switches, outlets.

• Perform other general maintenance tasks including housekeeping, landscaping, painting, and carpentry.

• Ensure replaced parts or equipment are of correct specification and properly tagged.

• Perform assigned responsibilities, duties, and tasks according to established practices, procedures, techniques, standards in a safe manner and with minimal supervision.

• Observe all company and legal, safety, health and quality policies.

• Report quality issues, accidents, safety violations, or other concerns.

• Perform functional test of the repaired item before handling over to the stakeholder.

• Ensure cleanliness, tidiness and safety of work environment.

• Respond to off hours critical calls to resolve facility/equipment issues.

• Perform other tasks as assigned by the supervisor/management.

Job Requirement:

• Forklift license is a plus (if not, training will be provided)
• Min GCE 'N' or 'O' or Nitec is preferred (Electrical / Electronics / Mechanical / Mechatronics or relevant).
• Able to understand basic mechanical/electronics/electrical drawing.
• Knowledge of DCS/PLC programming and instrumentation related skills will be of added advantage.

Deliver, setup and dismantle draught system at designated outlets;

Ensure every draught beer line and tap in all accounts assigned is cleaned regularly;

Troubleshoot basic draught system problems and respond to trouble calls in a timely manner;

Maintain product freshness and presentation through product rotation and equipment cleanliness and appearance;

Maintain assigned Company vehicle in a clean and orderly conditon;

Responsible for maintenance of tools to perform technical tasks;

Must be able to communicate comfortably with all customers;

Proper filing and keeping of documents;

Maintain strict confidentiality of information;

Other ad-hoc functions as may be required.

Must have valid class 3 driving license;

Must be able to bend and kneel and reach with hands and arms consistently;

Standby and irregular hours will be required;

Previous experience in the beer industry is a plus;

Self-starter, able to work independently but also a team player.

** Interested applicant please call Mr. Johnny @ 9231 9199 for interview

We are seeking a skilled Service Technician (Electrical) to join our team at the Sea Forrest Creation Lab. The ideal candidate will be responsible for:

Responsibilities:

• Inspect panels and electrical systems to identify and resolve any issues or malfunctions.
• Conduct regular tests to ensure proper functioning and compliance with safety standards.
• Ensure that electrical panels and systems meet the required standards and specifications.
• Document electrical panel specifications, wiring diagrams, and system configurations.
• Coordinate with shipyard for the installation, commissioning and testing of all electrical systems and panels.
• Hands on testing, troubleshooting, and commissioning of all supplied electrical systems and panels.
• Work in cooperation with other internal and external stakeholders to ensure that supplied systems pass all relevant class surveys and inspections.
• Produce and document all necessary paperwork for class certifications during commissioning process.

Workshop Inventory Management:

• Maintain accurate records of all items in the workshop inventory.
• Monitor stock levels and reorder supplies as needed.
• Conduct regular stock checks and report any discrepancies.

Receiving and Dispatch:

• Receive incoming materials, tools, and equipment.
• Verify the accuracy of received items against purchase orders.
• Prepare items for dispatch, ensuring proper packaging and documentation.

Organizing and Storing:

• Arrange and organize materials in the workshop store for easy accessibility.
• Implement an efficient storage system to maximize space utilization.
• Label and categorize items to facilitate quick retrieval.

Maintaining a Clean and Safe Environment:

• Keep the workshop area clean, organized, and free from safety hazards.
• Adhere to safety protocols when handling, working with and storing materials.
• Ensure compliance with safety regulations and guidelines in all electrical activities.
• Conduct regular safety checks on electrical systems to mitigate potential hazards.

Equipment Maintenance:

• Ensure that workshop equipment, such as tools, machineries, shelves and racks, are in good condition.
• Report any maintenance or repair needs to the relevant department.

Qualifications / Skills:

• Able to read drawings and terminate central cables.
• Strong troubleshooting and problem-solving skills for Electrical main switchboard.
• Familiarity with electrical testing equipment and diagnostic tools.
• Ability to read and interpret technical drawings and schematics.
• Attention to detail and ability to work independently or as part of a team.
• Possession of a Class 3 Driving Licence or WSQ Forklift Operator Licence is advantageous.
• Prior work experience in shipyard is advantageous.

• Provide hands-on support to engineers at site locations during the installation of our heat removal solutions, along with the installation and configuration of electrical components.
• Assist with routine maintenance tasks and troubleshooting of electrical issues on ongoing projects.
• Troubleshoot and resolve technical issues and provide support to Project Engineers when required.
• Monitor and report on project progress to all relevant stakeholders.
• Ensure compliance with applicable health, safety, and environmental regulations at project site.
• Participate in site audits and suggest areas for improvement.

Requirements:

• Diploma in Electrical Engineering or a related field.
• Previous experience as an Electrical Technician, ideally within a data center or similar environment.
• Familiarity with various electrical systems and equipment.
• Proficient in using electrical diagnostic tools and equipment.
• Demonstrated ability to diagnose and repair electrical problems.
• Excellent communication, interpersonal, and presentation skills, with the ability to collaborate effectively with team members, clients, and external partners.
• Strong analytical and problem-solving skills, with a keen attention to detail.
• Ability to work independently and manage multiple priorities in a fast-paced environment.

1. Knowledge in Electrical and Electronic Systems.
2. With I.T. computer and programming knowledge.
3. Work with Project Team.
4. Support installation, maintenance of equipment / systems on-site.
5. Preferrably with Class 3 driving license.
6. Hardworking with good team work.
7. Can work independently with minimum supervision.

Responsibilities:

• Perform in process quality check and physical test on in-process materials & finished products
• Prepare Sampling of Intermediate products and finished products and collected send to QC lab for testing
• Perform quality check on Packaging material and physical testing.
• Maintain retention sample for all production batches.
• Housekeeping of In-process laboratory equipment and retention sample.

Requirements:

• ITE / A Level or equivalent of related field
• Able to perform independently in a fast paced environment
• Able to perform multi-task as assigned by superior
• Fresher welcomed
• Willing to do OT
• 1 or 2 years hands on experience in related field will be advantageous

Purpose

Operations Technician / Senior Operations Technician:
The incumbent operates all equipment and facilities in his assigned area safely and efficiently and keeps the same in good state of maintenance. He works
closely in a team, keeping in close contact and in particular, highlights all items bearing on safety, quality and efficiency.

Senior Operations Technician:
The incumbent is primarily responsible for smooth, safe and efficient operations of assigned process stages. He ensures associated facilities are kept in
good maintenance. He assists the production superintendent in giving work directions to technicians and deputies for the superintendent from time to time.

Key Responsibilities

• Performs batch / unit or ancillary operations safely and efficiently following standard operating procedures and as necessary, leads technicians in unit operations. Takes in process samples and carries out checks using analytical instruments.
• Do routine mechanical and lubrication checks and where required, carries out early maintenance and repair using hand tools.
• Performs materials handling and movement using hand-pallet trucks, reach truck or other material handling equipment in a safe manner, following standard operating procedures.
• Ensures that batch and operating log sheets are correctly recorded and complied.
• Follows Good Documentation Practices and ALCOA+ principles when executing instructions and recording data, and adheres to Document Error management procedures if document error is observed
• Communicates clearly with his superintendent and colleagues and at the end of his shift, hand-over to his senior operations technician highlighting production status and any items bearing on safety, quality and efficiency.
• Do engineering-related work with technicians during process runs, plant configuration during the campaign change over or maintenance using hand-tools. E.g.: filters change, equipment replacement and other plant-care type engineering work. Prepares plant and equipment for engineering maintenance.
• Inspects and maintains house-keeping of his assigned area for clean and safe working conditions as well as ensuring that personal protection equipment, safety and fire-fighting equipment are maintained ready for use.
• Carries out fire fighting / first-aid duties as assigned and trained.
• Perform plant trouble shooting using appropriate problem solving tool to minimize plant stoppages and safety or quality incidents.
• Raise improvement ideas and implement initiatives to support department objectives.
• Carries out other related duties as assigned by the superintendent, production leader or senior technicians.

Why you?

We are looking for professionals with these required skills to achieve our goals:

• Diploma in Mechanical Engineering
• Minimum 2 years of experience in pharmaceutical API plant
• Experience in maintaining and operating production and utility equipment

Technical

• Familiar with good manufacturing practices, safety procedures
• Trouble shooting skills
• Basic awareness of industrial standards
• Good knowledge in maintenance and operating principles of production and utility equipment
• Plant inspection skills (for Superintendent deputy role, as needed)
• Good knowledge of Permit-to-Work systems and Risk Assessment (for Superintendent deputy role, as needed).
• Correct documentation errors in accordance to existing procedures

Business

• Good communications skills

Competencies

• Ability to work as a team
• Problem solving skills
• Analytical thinking skills
• Planning and Organisation skills
• Leadership skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why Us?

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organization where people can thrive. Getting ahead means preventing disease as well as treating it, and we aim to positively impact the health of 2.5 billion people by the end of 2030.


Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

JR: 389406

Descriptions

• Perform automation machine assembly, commissioning and installation.
• Handle, analyze and resolve machine issues during testing.
• Operation of Facilities equipment.
• Perform preventive and corrective maintenance of Facilities system when needed.
• Organizes repair works according to the schedule of the department job allocation.
• Supervises group of workers to perform mechanical jobs and gives guidance.
• Response to operations/equipment issues
• Support all manufacturing and related areas, ensuring smooth operations and uphold environment safety
• Support to execute document change when needed
• Ad hoc assignment by Supervisor

Requirements

• At least 2 Year(s) of working experience in machine mechanical part assembly.
• Ability to read and interpret electrical and mechanical drawing.
• Possess good communication and interpersonal skill
• Able to generate simple reports.
• Ability to work independently and with all levels.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

• Provide maintenance for all production machines / equipment in our factory.
• Assess and analyse current production methods, develop and draft improvements for the production process.
• Design development plans to increase the speed and efficiency of processes without compromising quality of poultry products.
• Develop and implement quality control measures to maintain the equipment and guarantee desired results.
• Diagnose origin of machines / equipment breakdowns, including human error, and troubleshoot problems.
• Communicate with relevant stakeholders to obtain materials or tools needed for maintenance of machines / equipment.
• Follow and ensure that all machines / equipment adhere to state, federal and company enforced safety rules and regulations
• Inspect and maintain all machines / equipment and prepare weekly maintenance report for the management.
• Other ad-hoc activities assigned by management.

The Diving Technician is responsible for the repair, maintenance and working performance of all diving life-saving equipment, machinery and tools. The dive technician will work closely with the other maintenance personnel and report directly to the Fleet Manager. His duties and responsibilities are (but not limited to):

1. To carry out the repairs and maintenance of all diving life-saving equipment, machinery and tools and to ensure that they are ready for use as and when required

2. ⁠To immediately report to the Fleet manager any diving life-saving equipment failure that will affect diving operations. To be ready to provide feasible solutions and rectify the issues.

3. ⁠To carry out all work in compliance with national regulations and where required, to international codes of practice and best practice at all times.

4. ⁠comply with Company’s safety standards, procedures and practices whilst at work at all times.

5. ⁠To ensure Risk Assessments and SOPs are followed for all work.

6. ⁠To be prepared to travel out to sea when required to repair equipment on site

7. ⁠To ensure all diving life-saving equipment, machinery and tools, and any other related equipment are routinely maintained, tested and in-dated in accordance with the Planned Maintenance System

8. ⁠To accurately log and update all repairs and maintenance in the PMS program when carrying out such works

9. ⁠To ensure all planned and unplanned maintenance are carried out by safe work processes.

10. ⁠To provide any support for the overall operations of the warehouse, office facilities and property maintenance if required

11. ⁠To manage, store and control hazardous materials in compliance with local regulations

12. ⁠ To ensure the diving life-saving equipment, spare parts and consumables inventory is updated, maintained and accurate at all times.

13. ⁠To report stock levels and carry out the control, issue and return of diving life-saving equipment, consumables and spares.

14. ⁠To ensure the diving life-saving equipment annual audit is conducted and any non-conformances closed out.

15. ⁠Fully understand and implement the procedures and working practices as laid down in the company manuals and other documentation.

16. ⁠To carry out any task in line with the position role and responsibility and on mutual agreement between employer and employee.

Responsibilities:

• Operate conventional cylindrical grinding machines

• Carry out grinding process for external or internal cylindrical surfaces.

• Read and interpret technical drawings.

• Determine grinding speeds, feed rates, holding fixtures, and grinding wheels to be used.

• Mount grinding wheel.

• Dress wheel according to specifications.

• Confirm ground work piece has the correct specifications.

• Change worn grinding wheels.

• Check grinding wheel.

• Utilize micrometers, calipers, and preset gauges.

• Any other tasks as and when assigned by superior or management

Requirements:

• Minimum ITE certificate or ‘O’ Level

• 2~3 years of cylindrical grinding experience

• Candidate with crankshaft grinding skill or experience will be added advantage

• Able to operate manual machining tools, read blue prints or engineering drawing

• Use of measuring instruments in the performance of daily duties

• Good work attitude and regular in attendance

• Good team player

• 5-day work week

The senior lab analyst in the Analytical Service Laboratory in compliance with ISO/IEC 17025 standards, plays a multifaceted role that encompasses precise chemical analysis, adherence to quality management systems, and active participation in production-related activities. This position is designed to contribute to the laboratory's commitment to ISO/IEC 17025 standards while also supporting production processes to meet organizational objectives.

Principal Duties and Responsibilities:

• Responsible for improving safety culture through strong participation and ensuring compliance with all relevant safety regulations, procedures, and protocols.
• Responsible for 5S activities in Lab and Housekeeping inspections.
• Responsible for all relevant risk Assessments activities to ensure risk assessments are done and documented.
• Responsible for timely reporting of all near misses and Incidents within the Lab.
• Responsible for chemical consumable inventories stays with in HS License limits.
• Accountable for day-to-day sample planning and scheduling, with objective to accurately and timely delivery of COAs and Analytical reports in a timely manner.
• Accountable and responsible to carry out sampling activities in the Lab related to ICP-MS, ICP-OES, GC, GCMS, IC and Wet chemistry.
• Accountable to develop, update and maintain Standard operating procedure and other quality documents.
• Accountable for all the waste management generated from the day-to-day operations.
• Accountable for maintaining and enforcing cleanroom regulations for all personnel, vendors, and visitors.
• Accountable for vendor management to ensure equipment upkeep by intime execution of calibration, preventive, and corrective maintenance activities in adherence to regulatory and quality assurance standards.
• Accountable for LIMs (Sample Manager) system management.
• Accountable for root cause(s) investigation and intime CAPA closure for laboratory equipment failure and result abnormalities.
• Responsible for internal ISO 9001, ISO 14001, SS651 and ISO17025 audits and technical representative forISO17025 external audits.
• Responsible for implementation of Management of Change (MOC) policy for all the changes.
• Responsible for application of statistical methods and tools for comparison and performance verification. Monitor control charts to identify need for new standards or instrument maintenance.
• Support new method development and new equipment validation activities as required.
• Accountable for training and mentoring of Lab analysts, fostering skill enhancement and professional development.
• Other works as assigned by the Manager.

Major Position Responsibilities:

• ISO/IEC 17025 Compliance
• Analytical Method Development and Validation.
• Sample Analysis, Instrumentation Operation and Calibration,
• Quality Control, Data Interpretation and Reporting,
• Safety Compliance, Project Management,
• Training

Qualifications and Experience:

• Bachelor’s degree from a chemistry and relevant discipline
• Minimum of 10 years of relevant experience in chemical laboratory of chemical/ Analytical Laboratory

Additional Information:

• To supervise and train lab staff on SM12.3 and ISO 17025 compliance
• Must be able to differentiate color for work purposes
• Will be required to work in the vicinity of chemicals and wear various PPE like chemical-clothing and respiratory masks.
• This role is required to work shift.

Primary Function:

To perform testing and analysis of fuel oil, petroleum and petrochemical samples, calibration of lab equipment, quality control and other lab duties.

Duties and Responsibilities:

• To carry out analytical tests in the laboratory in accordance with approved methods or customer's requirements
• Ensure all the test results and calculations are in order before submission to Chemist/ Supervisor
• Attends to witnessing of tests in outside laboratories in order to ensure that all tests are carried out properly and in line with the required test methods
• Assists in reagent preparation and standardisation and feedbacks to purchasing personnel regarding stock levels or reagents

Requirements:

• Possess ITE/Diploma/Degree in Chemical Process Technology / Chemical Engineering
• Willing to work in Jurong Island and perform 12-hour rotating shifts
• Relevant experience in laboratory testing is an added advantage. Training will be provided for suitable candidates without experience

Surface Preparation Engineering Pte Ltd is a leading surface technology machinery and equipment engineering company specializing in the design, manufacturing, and assembly of high-quality machinery components and systems for surface preparation applications. With a commitment to precision, innovation, and customer satisfaction, we deliver cutting-edge solutions to various industries including automotive, aerospace, marine, and manufacturing.

Position Overview: We are seeking a skilled and detail-oriented Machine Assembly Technician to join our dynamic team. The Machine Assembler will be responsible for assembling, fitting, and adjusting mechanical components to ensure the accurate and efficient operation of our machinery. The successful candidate will have a strong mechanical aptitude, excellent attention to detail, and the ability to work effectively in a fast-paced manufacturing environment.

Key Responsibilities:

Read and interpret engineering drawings, schematics, and technical specifications to assemble machinery components accurately.

Assemble mechanical components such as gears, bearings, shafts, and housings according to assembly instructions and quality standards.

Perform fitting, alignment, and adjustment of parts to ensure proper functionality and performance of machinery.

Install and connect electrical components, sensors, and control systems as required for machine operation.

Inspect assembled components and finished products to ensure they meet quality standards and specifications.

Troubleshoot mechanical and assembly issues as they arise during the assembly process.

Collaborate with engineering, manufacturing, and quality assurance teams to resolve technical issues and improve assembly processes.

Maintain a clean and organized work area, adhering to safety protocols and regulations at all times.

Participate in training programs and continuous improvement initiatives to enhance skills and knowledge related to machine assembly techniques and technologies.

Follow company policies, procedures, and guidelines to ensure efficient and effective assembly operations.

Qualifications:

High school diploma or equivalent; technical certification or vocational training in mechanical engineering or a related field preferred.

Proven experience in machine assembly, mechanical fitting, or a similar role within a manufacturing environment.

Strong mechanical aptitude and ability to use hand tools, power tools, and precision measuring instruments effectively.

Proficiency in reading and interpreting engineering drawings, schematics, and technical documents.

Familiarity with electrical components, wiring, and basic electrical systems is an advantage.

Excellent attention to detail and ability to work with precision to meet quality standards.

Strong problem-solving skills and ability to troubleshoot mechanical and assembly issues effectively.

Good communication skills and ability to work collaboratively in a team environment.

Commitment to workplace safety and adherence to safety protocols and regulations.

Joining Surface Preparation Engineering Pte Ltd as a Machine Assembly Technician offers an exciting opportunity to contribute to the manufacturing of cutting-edge machinery while working in a collaborative and innovative environment. If you have the skills, experience, and passion for precision engineering, we invite you to apply and become a valuable member of our team.

Our client is a well established Healthcare & Laboratory Equipment company. They are currently looking for a QC Laboratory Technician to join their expanding team.

Salary: up to Basic $3,000 + Transport Allowance $150
Work Days: 5 Days (8am to 4:45pm)
Work Location: Boon Lay (near Boon Lay MRT Station)
Work Terms: Full-Time Permanent

Responsibilities:
• Ensure all laboratory tests are well managed and performed including testing on raw materials, intermediates and finished products.
• Ensure all laboratory instruments and equipment are maintained and calibrated.
• Manage the inventory of quality reference materials such as QC reagents and lab consumables.
• Prepare daily QC report, relevant work instructions and validation protocol or reports.
• Ensure documents and quality records are maintained for easy retrieval.
• Manage operations towards timely support to meet factory analytical request.
• Develop training to build quality and safety awareness.
• To maintain cleanliness of laboratory and glassware.
• Handle administration work of factory when required.

Requirements:
• Min Nitec / Diploma in Chemical Process Technology or equivalent
• 1 to 2 years experience in handling wet chemistry and laboratory management
• No colour blindness and willing to stand while doing lab work
• Strong troubleshooting skills with various analytical instruments
• Good verbal and written communication and interpersonal skills
• Positive working attitude with sense of urgency
• Able to work independently as well as an effective team player

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Salary information
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065
Tel: +65 6565 1939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

Job Responsibilities

• Operate the process accordance with the Standard of Operations and comply strictly to safety, quality and environmental guidelines.
• To interface daily with production plant so as to enhance collaboration and speed up every activity.
• Carry out small batch blending productions.
• Report all process/equipment/environmental abnormalities, incidents and/or near misses. Take part in further investigation when required.
• Assist in coordination of daily maintenance planning and to participate in maintenance activities and shut-down/start-up of sections.
• Assist in training of new technicians.
• Ensure export is properly carried out and right material is being sent out.
• Carry out inventory control and ensure proper usage.
• Carry out scheduled housekeeping activities.
• Suggest new ideas to improve the existing facilities in the packing division.
• Any other duties as and when required.

Job Requirements

• Possess at least a Diploma in Chemical Process Technology, Chemical Engineering or equivalent.
• Preferably 1 to 2 years of relevant experience in chemical/ petrochemical industry.
• Forklift license would be an added advantage.
• Ability to prioritize tasks based on urgency.
• Able to work under fast-paced environment.
• Good interpersonal and communication skills.
• Team player.
• Proficient in MS Office.
• Entry level candidates are welcome to apply. On-the-job training will be provided.
• Must be able to work on 12-hours rotating shift in Jurong Island.

** This is a 1-year contract role, where conversion to permanent after 1 year will be based on business needs and individual performance **

Job Description

• Able to operate the machine assign by the supervisor
• Taking care of the working area following 5S and Safety Standard
• Conduct machine daily maintenance
• producing the part based on the schedule given
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• High motivation to learn
• Singaporeans only

Key Responsibilities:

• Ensure safe and optimal operation of process units
• Ensure workplace safety by proper asset upkeep, supporting function testing on
  safeguarding system and proper control on work activities in the plant
• Participate in plant shutdown & start-up and process unit troubleshooting work activities

Requirements:

• Diploma or NITEC in Chemical Process Technology (Petrochemicals or Pharmaceuticals) OR
• At least GCE “O” level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE / Polytechnic engineering graduates are welcome to apply as training will be provided

Responsibilities:

• Perform maintenance for all plant Electrical, Instrumentation and DCS equipment
• Perform routine patrols, planned preventive maintenance and condition based monitoring activities
• Perform routine functional inspection of safety Instrumented systems and quality control equipment
• Conduct troubleshooting to identify and rectify the root cause of equipment failure
• Suggest and implement improvement ideas to advance equipment reliability, enhance productivity and eliminate waste.
• Perform housekeeping of maintenance area
• Timely entry of work activity into SAP system and good documentation follow up

Requirements:

• Diploma in Electrical or Electronic Engineering or equivalent
• Minimum 2-year relevant experience in chemical or petrochemical industry.
• Experience in maintaining and troubleshooting Electrical and Instrumentation Equipment
• Experience in PLC programming and/or maintaining and troubleshooting DCS will be an added advantage
• Exposure to Thermographic inspection, Vibration Analysis, Partial Discharge Testing, Dissolved Gas Tests and Lightning Protection Grounding Tests will be an added advantage
• Knowledge on root cause analysis concepts and methods (Fishbone, Cause mapping, 5-Whys) will be an added advantage

Responsibilities:

• Sales & support of Laboratory Equipment & Scientific Instrument and supplies
• Maintaining existing accounts and establish new customers and markets

Requirements:

• Diploma/NITEC in Chemical, Applied & Life Sciences & related engineering discipline
• With or without sales working experience
• PC skill, self-motivated & result-oriented
• Possess class 3 driving license

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact 6566 5498 for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Joni

EA License No : 03C5391

EA Reg No : R1106641

What a Repair & Maintenance Technician does at HP:

• Provide investigation and troubleshoot automated manufacturing equipment/process failure.
• Plan and execute timely & effective maintenance programs.
• Study machine data, analyze and implement corrective/preventive action to improve equipment reliability, utilization & yield performance.
• Maintain required level of spares and proper documentation on all assigned equipment.
• Adhere to HP policy including ISO 9K/50K & EHS&S 14K/18K programs.
• Lead/participate in process development & simplification project to improve product quality & workflow.

Individuals who do well in this role at HP, usually possess:

• Diploma in Electrical / Mechanical / Electronics/ Mechatronic Engineering or Higher Nitec with 2 years relevant experience.
• Good teamwork, communication, and interpersonal skill.
• Excellent analytical troubleshooting skills and creative thinking.
• Independent and able to adapt to dynamic operation environment.
• Effective planning, execution, and issue resolution
• Adapt to Smart Manufacturing (Industry 4.0) concept to optimize manufacturing process and increase productivity through innovation.
• This is a 2 year renewable contract.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Job Summary

Responsible for in-process and final product quality analyses/inspections in compliance with standards and regulatory requirements. Interprets and evaluates the analyses in terms of accuracy and precision compared against established specifications. Identifies ongoing quality issues, prevents potential product issues, and makes suggestions for improvement. Uses various measuring devices, testing equipment, predetermined methods, operations, setups and prescribed specifications to accept or reject products. May work from blueprints, diagrams, dial indicators, present micrometers, scales, fixtures, customer specifications, drawing or inspection instructions checklists.

Job Description

• Responsible for maintaining, troubleshooting and repairing product contact equipment to meet HSE, quality and productivity standards
• Perform maintenance work in accordance to approved SOPs and job plans generated from the preventative and corrective maintenance management system
• Carry out troubleshooting, repair, CM and PM activities for Compounding (Wet process), Filling and packaging critical equipment (CM) while minimizing Production downtime to support reliable manufacturing operations
• Advantage experience in filling and packaging machine
• Oversee and be responsible for contractors/ vendors on site

Requirements

• Minimum qualification in from Higher NITEC in Electrical, Instrument, Mechanical or Electronic Engineering and above
• 3 to 5 years of experience working in the Manufacturing Industry

Roles:

Process Technician will be part of the Operations Team responsible for ensuring Operations processes run smoothly as per production plan. The incumbent is expected to be proficient in troubleshooting and resolving operations and process issues.

Responsibilities:

• Manage safe start up and shutdown of process/unit
• Ensure routine tasks and operations checklists are completed as scheduled
• Issue and close safe work permits and ensure work activities are carried out safely
• Ensure proper handover and takeover during shift change
• Participate in Environment, Safety, Health and Compliance programs

Requirements:

• Diploma with background in chemical or mechanical
• At least 2 years’ of relevant experience in a manufacturing/polymer plant
• Possess Class 1 or Class 2 local boiler attendant certification
• Strong interpersonal skills
• Proficient in Microsoft Office
• Good team player, with strong self-initiative
• Experience in DCS operations and controls
• Supervisory skills is advantageous
• Willing to perform 12hour rotating shift work