• Reports to Instrumentation Manager
• Responsible for data processing for instrumentation, bored pile works, and relevant field works
• Coordinate with subcontractors, QPD, QPS & LTA
• Manage the schedule of all Instrumentation item as per construction program

Job requirements:

• Degree in Civil Engineering/Geotechnical Engineering or equivalent
• At least 5 years of working experience in Construction Design Field
• Experience in viaducts / infrastructure preferred
• Previous experience in LTA project is required
• Technical expertise and knowledge in Instrumentation & geotechnical field.
• Good communication skills
• Project: Viaducts
• Location: Woodlands

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Responsibilities:

• Coordinate and work closely with Project Manager to oversee site matters and provide technical support such as interpret construction drawings
• Ensure all technical drawings conform to the latest BCA codes and regulations
• Supervise site progress and ensure timely delivery of contract works from subcontractors/suppliers
• Manage subcontractors/suppliers to perform their respective scope of works for smooth project execution
• Conduct regular site inspections and enforce in-house regulations
• Attend site meetings to assist the Project Manager with necessary preparatory works
• Liaise with relevant government agencies to obtain necessary site permits/clearances
• Any other ad-hoc duties as instructed by superiors

Job Qualifications / Requirements:

• Possess a recognised Degree or Diploma in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management and at least 8 years of relevant working experience of the building construction industry

or

• Degree in local universities in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

Job Description

• To assist PM to plan, organise and schedule projects.
• To prepare necessary document for submission to the authority.
• To conduct pre-con site survey/inspection then collate information and prepare inspection report.
• To assist in any project administration such as vet through project contract and arrange insurance.
• To monitor material listing.
• To take charge of handover process including final site inspection and prepare completion report.

Job Requirements

• Candidate must possess at least Diploma in M&E / Electrical Engineering or equivalent qualifications.
• Candidates with no experience or fresh graduates are welcome.
• Possess leadership and positive attitude is preferred.
• Able to prepare drawing with autocad or solidworks.
• Must be responsible, time conscious, organise and meticulous.
• Possess Class 3 driving license is preferred.

Job Description:

• Support set up of machinery to ensure on-time for mass production.
• Responsible for leading machine conversions and cleaning equipment.
• Assist in immediate breakdown restoration of machine function to achieve production output.
• Perform troubleshooting and diagnostic-based troubleshooting guide.
• Conduct on-the-job training for new production operators and technicians
• Statistical process monitoring and control lead to productivity improvements.
• Support continuous improvement initiatives toward production efficiency and quality.
• Design and fabricate simple jigs/fixtures to improve production processes.
• Carry out periodical maintenance for process machinery on schedule.
• Review process issues, and internal corrective action requests, assist in a customer complaint investigation, and conduct failure analysis.
• Assist new production introduction trial run.
• Ensure customer orders are fulfilled on time in full.
• Perform reconciliation and maintain an accurate inventory of materials and finished goods.
• Consistently adhere to good housekeeping practices and safety regulations.
• Responsible for completing and countersigning GMP documentation for traceability and submitting it to Management at the end of each processed order.
• Ensure workplace safety.
• Workplace housekeeping and cleanliness.
• Any other duties and responsibilities as assigned by the management.

Job Requirements:

• Preferably at least a Diploma / Higher NITEC / NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering.
• Able to read basic engineering drawings.
• Fluent in both oral and written English.
• Knowledge of GMP will be an added advantage.
• Good communication and interpersonal skills.
• Able to support overtime and shift.
• Systematic and able to work under pressure.
• Able to work independently.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

• Salary up $4500
• Location: Tai Seng
• 5 Days work week

Responsibilities:

• Oversee drawing management and control of technical documentation
• Assist project manager in planning and execution of project plans at site
• To understand and design electrical drawing and single line drawings
• Carrying out tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementing preventative maintenance procedures
• Preparing service & Site Progress Reports

Requirements:

• Diploma in Engineering or equivalent
• Min 2 years of working experience in construction industry
• Knowledge in PLC is must
• Knowledge in Hydraulic System Control will be an added advantage

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1222284 | Kelvin Soh

Responsibilities:

• Develop and design engineering plans and construction documents for projects.
• Conduct site inspections and assessments to ensure project feasibility and adherence to regulatory standards.
• Perform calculations to assess structural integrity, safety, and sustainability.
• Manage project timelines, budgets, and resources, collaborating with contractors and local authorities.
• Oversee and provide guidance during the construction phase to ensure quality and compliance with designs and plans.
• Monitor environmental impact and ensure all designs are sustainable and eco-friendly.
• Update project records and ensure that all documentation is accurate and up to date.

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

The Advanced Controls COE is Looking for You

Halliburton invites qualified candidates to apply for a position with the Advanced Controls Center of Excellence (COE) in Singapore. Candidates with interests and background in control systems theory, robotics, mechatronics, dynamic modeling, or data analytics and machine learning are encouraged to apply. This position provides an opportunity to participate in a strategic research and development program shaping the industry’s future technology. By solving challenging technical problems you can have a rapid impact on a commercial market with significant revenue. Successful candidates are expected to perform original and relevant research and development to expand the group’s expertise and technology portfolio. The Advanced Controls COE at Halliburton encourages a culture of continued learning, inventing, and innovating by bringing together a diverse group of top-notch engineers and researchers. The group has a track record of developing advanced control and smart systems that are used to produce value around the world every day. Our goal is to continuously grow the group’s core research expertise in the area of control, robotics, dynamic modeling, filtering, data analytics, and machine learning to build advanced automation and control technologies and maximize the value of data to ensure the long-term success of Halliburton.

Responsibilities

• Conducting research and development in modeling, control, and data analytics for solving challenging problems in the oil & gas industry
• Contributing to the identification of high value problems and opportunities
• Participating in control system design, control system prototyping, and implementation
• Design smart systems to augment complex tasks
• Collaborating with team members and providing necessary support for technology transfer
• Publishing results in patent applications, technical journals, and conferences

Required Education and Skills

• A PhD (or equivalent experience) from Mechanical Engineering, Aerospace Engineering, Computer Science, Chemical Engineering, or Electrical Engineering with a focus on Control Theory and Applications, Robotics, Mechatronics, Machine Learning, or Data Analytics.
• Skills typically acquired through the completion of an undergraduate degree in Science, Engineering or similar discipline, and 2 years of related experience. Completion of a masters or PHD in Science or Engineering is preferred
• Experience and strong interest in solving practical problems, from invention to implementation in the field
• An excellent publication and patent record consistent with experience.
• Extensive knowledge in control theory, such as modern control, adaptive control, robust control, nonlinear control, optimal control, Model Predictive Control, etc., with outstanding ability to identify the proper control method for solving practical control problems and, when necessary, to develop new control methods, and/or
• Extensive knowledge and practical experience in the application of Data Analytics including machine learning techniques such as SVM, Neuro Network, Bayes network, Genetic Algorithms, etc., preferably with control applications, and/or
• Knowledge of robotic systems with high DoF control, path planning, mechatronics, or dynamic modeling of complex systems
• Demonstrated teamwork, strong communication skills, and collaborative in complex engineering projects

Preferred Experiences

• Worked with large data sets, unstructured data, structured data and supporting compute/cloud systems like Microsoft Azure
• Built tools/workflows and support structures needed to analyze data, perform data cleaning, execute feature detection and extract business value from data
• Developed models, control algorithms, workflows, & software for use in field operations.
• Leveraged data visualization software applications, such as R, Power BI, Spotfire or Tableau

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher-level roles give (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available

As an Automation Engineer, you must be able to use Technology to improve and automate the manufacturing processes.

Automation Assistant Engineer / Engineer Responsibilities:

• Develop, modify, and maintain manufacturing lines, ensuring production equipment operates efficiently and is well-maintained.
• Provide technical support for day-to-day manufacturing operations, resolving issues independently and addressing capacity constraints to ensure reliable plant performance.
• Lead or contribute to continuous improvement projects, focusing on engineering solutions for cost reduction, process optimization, and supporting Lean Manufacturing and operational excellence initiatives.
• Monitor machine component failure patterns and implement predictive maintenance schedules for critical equipment, managing machine maintenance and spare parts to minimize downtime.
• Train and mentor SMART Technicians and Production Technicians to enhance skills and improve efficiency.
• Drive machine improvement initiatives to boost productivity, quality, and reduce reject rates.
• Collaborate with operations and engineering teams to optimize OEE (Overall Equipment Effectiveness), improve cycle time on bottleneck equipment, and resolve capacity constraints.

Automation Assistant Engineer / Engineer Requirements:

• Diploma in engineering or its equivalent
• Fresh Poly Graduate will be considered

Job Responsibilities

• To schedule production and/or procure externally sourced materials in accordance with prevailing confirmed customer demand, ensuring material availability at finished goods warehouse.
• Day to day planning skills to keep track of, and prioritize process orders and/or purchase orders.
• Extensive planning and organizational skills to meet and satisfy customer demand over extended periods of time.
• To make scheduling and/or procurement decisions that will impact customer orders and company stocking policies.
• Day to day planning skills to ensure that raw materials, packaging will be available in time to meet production requirements.
• To continually devise improvements to systems to improve efficiency and the speed of delivery of information from the department.
• Communicate and support the QC department regarding possible material for rework and production and/or procurement changes.
• To attend and play a key role in contributing planning issues in daily and weekly meetings, providing key information in meetings to improve the efficiency and running of the plants and/or procurement process.
• Continually review the production schedule to ensure all forward demands are being met and take appropriate action to add, move or cancel production and/or purchases to minimize working capital.
• Investigate and respond to customer complaints.
• Using MRP review proposed output and make decisions on the viability of turning planned order and/or purchase requisition requirements into firm process orders and/or purchase orders.
• Ensure product compatibility is maintained
• Respond in a timely manner to Escalations taking action to schedule new production if required.
• Effectively communicate the production schedule and any issues arising from it to production, customer service, sales, and manager.
• Assist with other task assigned by manager.

Requirements:

• Knowledge of site manufacturing, processes and products.
• More than 2 years of planning experience in manufacturing environment with SAP systems
• Experience in using Epicor system will be an added advantage
• Knowledge of SAP processes in the Sales & Distribution and Production Planning modules.
• Competent user of MS Office packages.
• Ability to complete tasks to tight deadlines
• Good knowledge of Excel
• Excellent communication and writing skills. Must have written and oral proficiency in the English language.

· Coordinate with precast supplier on technical details assistance.

· Checking & submitting shop drawings to QPS/LTA for approval..

· Preparing MSRA for all work activity to be done at site.

· Monitor, planning & supervise setting up of precast storage yard.

· Monitor & supervise erection of gantry cranes at precast yard.

· Preparing the schedule for production based on site's delivery requirement.

· Checking & maintaining quality of PC production.

· Planning and scheduling of site works for PC installation.

· Monitoring storage space for precast deliveries.

· Checking quality of delivered products before installation

· Directed all necessary day to day Site activities.

· Monitoring work progress.

· Administration of all site works.

· Quality analysis and control of works.

.

Responsibilities:

• Supervise design schedule, estimates and drawing updates
• Control of all design & engineering documents
• Review of tolerances and constraints on new products prior to estimation
• Continuous development of cost saving activities
• Allocate and monitor schedules quality and cost for subcontracted design & tooling
• Support the Sales dept on design-related function
• Involve in all tooling designs & pre-sale activities (Prototype & quotation)
• Ensure tooling meet the production requirements
• Make tooling improvement to meet higher productivity

Requirements:

• Degree in Mechanical Engineering or equivalent
• 3-5 years hands on experience in precision metal stamping process/multi-slide forming
• Competent in tool design and conversant with CAD and geometric tolerance
• Meticulous and detail-oriented
• Able to prioritize workload and meet deadlines
• Team-player, self driven and able to work under pressure with a sense of urgency and meet tight deadline

Experience with injection molding, double disc grinding, and machining is an added advantage

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and commissioning electrical panels
• ⁠Loading testing D.G. sets
• Presenting surveys of electrical systems to relevant authorities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Oversee and mentor staff and liaise with a variety of Clients
• Handle over the resulting structures and services for use
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Roles & Responsibilities

• Prepare final reports for Incoming, In-process and outgoing processes.
• Compile and ensure timely submission of Manufacturing Record Book (MRB).
• Verify external provider's documented information (Incoming or secondary processes).
• Investigate and prepare non-conformance reports.
• Implement and verify corrective actions and ensure compliance with requirements.
• Present NCR findings to Management and customer.
• Liaise with customers on Notification of Inspection schedule and Pre-production meeting.
• Conduct internal training and process improvement plan.
• Involve in quality audits (Internal or External).
• Assist QA Manager on all issues.
• Any ad-hoc tasks which may be assigned.

Requirements

• Diploma or Degree in Engineering. Preferably Mechanical.
• 3 years of working experience in oil and gas industry.
• Familiar with international codes and standards (ASME/ASTM/API).
• Understanding and interpretation of drawing.
• Knowledge in Welding, NDE, CMM and manual inspection will be added advantage.
• Fresh graduates are welcome to apply. Training will be provided.

Job Responsibilities:

· Assist Project Manager to supervise project(s) comprising design, purchasing, quality control, production, and commercial.

· Coordinating drawings approval between classification, designer, and third parties

· Recommend, review & approved design specific cation

· Responsible for the execution of works control as per the project schedule that is planned by the Project Manager or himself

· Clients facing from start to end of the project be it site inspection/feasibility/visits, operational requirements such as solar system design and execution

· Vendors management to ensure project on schedule

· Provide inputs on accomplished schedules, manpower, machinery, and equipment status to the Project Manager as well as project progress reports

· Costs benefits analysis on proposed projects designs and suggesting cost reduction analysis for solar systems

· Administrative files and documentation where applicable

Job Requirements:

· Diploma/Degree in mechanical/structural/civil/related engineering discipline/renewable energy

· Min. 2 years of relevant experience in the similar industry/fields handling HDB related projects/renewable energy/solar photovoltaic

· Excellent communications and interpersonal skills to convey technical concepts clearly & effectively

· Effectively bilingual to liaise with non-English speaking clients

· Proactive, energetic, adaptable, analytical &problem-solving abilities

• Provide engineering support to various telecommunication equipment installations, testing, patching, and migration.
• Responsible for Outside Plant Cable Networks implementation such as RF cable, structured cable, Fiber optic cable installation, and testing.
• Responsible for fixing and troubleshooting ADSL Modem, CISCO Routers, and wireless APsPerf
• Perform fault diagnosis, analysis & rectification of LAN, WAN, and Telephone issues
• Perform site acquisition, site survey, acceptance test plan(ATP), and network planning of new sites to roll out and reconfiguration of sites
• Provide engineering support activities either remotely, or on-site.
• Rotational 24x7 standby duties required