Role: To ensure daily production targets are met to achieve productivity and quality. Required to work as a team & with all other departments to overall improve the manufacturing operations to yield profit, hence resulted in customer’s satisfaction.

Job Responsibilities:

· Set-up/Downing of mould and ancillary parts to new production run according to production job sheet or schedule.

· Ensure machines set-up conform to standard requirement.

· Attend to daily product’s quality issues and rectify the defects.

· Report immediately to Supervisor when defects are detected.

· Take lead on the start-up of blowing machine (after every shutdown) on segregation of contaminated bottles.

· Clean and wash utility production containers

· Support to general maintenance (cleaning) of production areas

· Disposal of any empty containers and trash material and any scrap i.e. broken pallets

· Sample contents and affix labels as needed

· Weigh, label and pack products according to manufacturing orders

· Ensure accuracy during dispensing and weighing

· Verify manufactured quantity against packaging quantity

· Move products to designated áreas

· Report any equipment malfunction

· Mixing any formulas as required and assigned

· According to specifications, performs the dispensing and/or weighting of raw materials for manufacturing orders of compounding fragrances as required

· Ensure accuracy during dispensing and weighing. (Knowledge of raw materials Will have an effect on quality)

· Possess forklift license is an advantage

· Perform other incidental and related duties as required and assigned

We are currently seeking a reliable and experienced Delivery Driver to join our team. As a Delivery Driver, you will be responsible for ensuring the safe and prompt transportation of goods to our valued customers within the designated area.

Key Responsibilities:

• Safely operate a delivery vehicle to transport packages to various locations.
• Ensure timely and accurate deliveries while adhering to traffic laws and company policies.
• Load and unload packages as necessary, ensuring proper handling and securing of items.
• Maintain cleanliness and perform routine maintenance checks on the delivery vehicle.
• Provide exceptional customer service during deliveries, fostering positive relationships with clients.

Requirements:

• Valid driver's license with a clean driving record.
• Proven experience as a delivery driver or similar role.
• Ability to work independently and efficiently manage time.
• Strong attention to detail and adherence to safety protocols.
• Excellent communication and customer service skills.

Benefits:

• Competitive salary with overtime pay.
• Opportunities for career growth and advancement.
• Comprehensive benefits package.
• Provided a delivery vehicle with the convenience of driving home and parking.

Location: Near Joo Koon MRT (2 bus stops away)

Full Time, 5 days week

With inhouse Canteen

Duties and Responsibilities:
• Responsible to lead the teams of production operators and technicians to meet daily production targets, schedule and quality standard.
• Plan workflow on the production teams and achieve the production target / Work closely with production planner to meet the on time shipments schedule.
• Draw up duty roster for operators and technicians; allocating work and plan & authorize the overtime accordingly.
• Work with various departments / engineering group in cross functional efforts to resolve the production related issues.
• Compilation and monitor the monthly production OEE and wastage report.
• Analyses and determine the production losses & high wastage causes, and ensure that the necessary corrective / preventive action is taken when necessary.
• Initiate action to prevent the occurrence of any non-conformity relating to product, process and quality system.

Secondary Responsibilities:
• Ensure the effective communication between shifts / Ensure the safety standard and GMP practices is followed strictly.
• Motivate and guide the operators and technicians, maintain discipline and manage their performance appraisals.
• Responsible for safety, department housekeeping & security management of the production floor / Identify the training programs for new technician, etc,

Job Requirements:
• Diploma, Degree with at least 5 years relevant working experience in similar capacity
• Good exposures in Manufacturing Processes and Handling Working Team
• Analytical and use data to continuously improve processes / understand manufacturing methods, best practises, etc.

ROLES AND RESPONSIBILITIES:

1. Identify and implement manufacturing process improvements and best practices.
2. Create standard working procedure or work instruction for shop floor.
3. Improves manufacturing efficiency by analysing and planning work flow.
4. Investigate non-conformance root cause and suggest corrective action.
5. Supporting the production for new products to ensure they meet customer requirement.
6. Coaching and training machinists on working procedure and work instruction.
7. Any other duties that is assigned by superior as and when is required.

REQUIREMENTS:

1. Preferably with Diploma in Engineering or related discipline.
2. Must be able to interpretation of BOM & Drawings.
3. Must have min 10 years of relevant experience in oil and gas industry.
4. Good knowledge on manufacturing best practice.
5. Good knowledge on relevant code and standards.
6. Good communication and training skills.
7. Investigation and problem solving skills.
8. Proficiency in Microsoft Office skills.

Job Description

• Production of in-process and finished products.
• Ensure products are manufactured according to specifications.
• Submit samples to the QC lab for inspection and test as per specifications.
• Pack and label products properly.
• Control and replenish raw materials/packaging materials.
• Maintain equipment/apparatus.
• Ensure no cross-contamination of products in storage.

Requirements:

• Candidate with experience in Food Flavouring manufacturing industry will be advantageous.
• Able to work in environment with strong smell.
• Able to speak mandarin will be advantageous
• Motivated and able to communicate effectively.
• Able or comfortable to lift / load and unload items weighing 20kg and above.
• Candidate must be willing to take overtime when required.

Additional Information:

• Frequent Shuttle bus from/to Lakeside MRT and Buroh Lane
• Working days is from Monday - Friday, 8:30am - 5:30pm

Job Description

The Food & Beverage Division Account Manager is the face of the company for our customers and is responsible for the profitable growth of the field sales by building on existing customers and expanding opportunities through new business and innovation. Account Manager fosters strong customer relationships by providing personalized service and valuable expertise in cleaning and sanitation and delivering chemical and operational solutions to Food Manufacturing Establishment. They also have an appetite for growth and exploring new areas and opportunities to aggressively grow the business.

Business Planning and Account Prospecting

• Meet sales and profitability targets – Area and Division
• Analyse with manager business results, identify growth opportunities and action plans
• Manage Grow to Win funnel and acquisition plan
• Negotiate and close the deal and implement conversion and start-up plan
• Deploy new programs and initiatives
• Implement targeted price increases at designated customers
• Establish service call plan to meet service level agreement

Account Management

• Develop and maintain customer relationships at all levels
• Service customers according to Service level agreement
• Optimise account profitability (e.g., equipment investment, flat fee management)
• Implement agreed corporate account commitments and proactively inform CAM of results, issues and initiatives
• Prepare and hold periodic business reviews with strategic customers
• Identify and monitor timely customers-at-risk, contract renewals and determine retention action plan with Manager
• Ensure collection of receivables to proactively prevent credit holds

Customer Value Delivery and Documentation

• Proactively identify, develop and implement solutions to improve results, customer service, and total cost
• Identify, quantify and communicate the Ecolab value provided

Safety:

• Follow Ecolab safety guidelines and incident reporting requirements
• Act as a safety champion at customers’ sites

Requirements:

• Preferably a university degree in Chemical Process Engineering, Food Science.
• At least 4 to 5 years of relevant experience
• Ability to work independently with a strong work ethic and integrity
• Strong commercial acumen with the ability to sell value and solutions
• A positive, flexible and results-orientated attitude with capabilities to handle pressure
• Industry experience
• Excellent planning, organizational, communication, and problem solving skills
• A positive, flexible and result- oriented attitude with capabilities to handle pressure
• Customer service orientation with consultative selling aptitude
• Technical understanding (e.g., electrical, mechanical)
• A valid Singapore Driver’s license
• Experience working with and knowledge of computers (e.g., MS Office suite)

• Able to speak and write simple English
• With forklift licence
• Must have some delivery experience
• 5-day work week
• Working hours: 8am to 5.40pm

Interested please call 65771722 or walk-in for interview

at 69 Tuas Ave 1, Singapore 639510

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Requirements:

• Candidate must possess at least Primary/Secondary School/"O" Level in Others or equivalent.
• Required language(s): English
• At least 2 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Manufacturing/Production Operations or equivalent.

Job Responsibilities:

• Read and follow job orders.
• Determine the required Qty to meet daily output.
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintained in good and safe working condition.
• Control and run the machine to the fullest extent.
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues.
• Inspect the machine outputs for process and quality control.
• Provide detailed reports and logs on the work done daily.
• Keep up with safety requirements and maintain the safe work setting at all times.
• Proposing improvements to the process or machines as needed.
• Reporting safety hazards within the work environment.
• Others Operational job related to Plant inclusive of debagging activities and Packing lime products in 25kg HL and jumbo bags is part of job scope.

Physical fitness and Skill:

• Machine operators should be physically fit since long operational hours can be required. Must be able to work Overtime.
• Ability to work as a team: good communication is important for working with others on the daily job.
• Machine operators should be comfortable working in a team.

Job Description

1. Handling full spectrum of AP/AR/GL

2. Manage Fixed Assets

3. Manage Inventory Account

4. Involved in Annual Budgeting Exercise and Variance Analysis

5. Liaise with and provide support to external auditors in Audit Works.

6. Handle Statutory surveys.

7. Support Preperation of Full Financial Reports and Other Management Reports.

Job Requirements

1. Minimum 3 years Accounting Experience

2. Strong Proficiency in Microsoft Office

3. Strong Analytical and Problem solving skills. Also detail minded and meticulous.

The School of Mechanical and Aerospace Engineering (MAE) at NTU Singapore is a top 11 Mechanical and Aerospace Engineering School in the world. With well-established industry partnerships, MAE provides an active and vibrant research environment with excellent R&D infrastructure and numerous opportunities for research funding. The school has an enrolment of over 2500 undergraduate students with over 90 faculty members and 140 full-time research staff working in well-equipped state-of-the-art laboratories. A growing research student population of over 400 is also actively engaged in strategic research and development work.

We invite highly qualified candidates in the relevant expertise areas to join our dynamic team of faculty.

Metamorphic & Digital Manufacturing Systems

Candidate Profile:

• Possess relevant Bachelor and PhD degrees from reputable universities.
• A good research track record, and postdoctoral experience would be advantageous.
• Teaching experience at either undergraduate or graduate levels will be an advantage.
• Research intersects the multidisciplinary field of Metamorphic & Digital Manufacturing Systems
• Expertise in Metamorphic Manufacturing, and Future of Manufacturing
• And/or Expertise in Advanced Automation, Precision Control for Intelligent Machines, and Robotic Systems.
• And/or Expertise in Digital Manufacturing Systems, Digital Twins in Smart Manufacturing Systems.
• And/or Expertise in Translational research work with industry in Advanced Manufacturing.
• Successful candidates are expected to teach at both undergraduate and graduate levels, supervise graduate students and undergraduate projects. Candidates on tenure-track are expected to conduct high impact research and acquire competitive research grant and funding to sustain an active research portfolio.

We Provide:

• An active and vibrant research environment
• Excellent R&D infrastructure and opportunities for research funding
• Well-equipped state-of-the-art laboratories
• Attractive research start-up grants and PhD student scholarships
• A competitive remuneration package and attractive benefits

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

·

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

Job Responsibilities

• Plan, execute and manage production operations with emphasis on volume, quality, cost and yield.
• Ensure employees’ productivity and instill high quality standards throughout the production process.
• Determine and ensure sufficient materials are planned to ensure continuous productivity.
• Ensure consistent and effective employee relations and disciplinary management in the Plant.
• Co-ordinate with relevant groups to ensure resolution of issues.
• Ensure assembly operations, written procedures are followed and where necessary to set up new procedure and systems to facilitate and exercise controls.
• To ensure planned and routine maintenance of machines and tools.
• Maintain good housekeeping and discipline, to foster a conducive and effective working environment as well as perform duties as and when assigned or requested.
• Enforce health and safety measures.

Job Requirements

• Must possess a Technical/Engineering, Degree, Diploma or related qualifications
• Have a minimum of five years’ experience in heavy metal fabrication - Aluminium and Stainless Steel or related industry.
• Demonstrate strong leadership organizing and communication skills.
• Proficient in written and spoken English and Mandarin
• Required skill (s) : MS Excel, MS Office
• Preferably Managers specializing in Manufacturing/Production Operations or equivalent.

a. To assist the Production Manager and Production Pharmacist in the production operations.

b. To check & ensure Manufacturing Procedure (MFP).

c. To assist & monitor on the operation according to the schedule

d. To assist on investigation of product issues / complaints, including root cause analysis and corrective and preventive actions (CAPA).

e. Initiate and follow-up of change control. Review and update SOPs related to Production.

f. Provide training to production operators on GMP and SOP requirements

g. Liaise with Engineering on new equipment needs and resolve any equipment related issues

h. Support regulatory inspections and/or customer audits

i. To assist other activities required for the smooth operations, productivity and improvement of the department.

j. Other duties assigned by the Management/Immediate Superior

Responsible for maintaining sound EHS working conditions.

Follows Standard Operating Procedures (SOPs) to operate and monitor manufacturing equipment, and responds to alerts during production.

Handles production materials within the facilities and performs cleaning and sterilisation activities.

Tasked with the day-to-day operations of individual manufacturing equipment.

Must adhere to Health, Safety and Environment (HSE) regulations at all times in order to protect both employees as well as the quality of the products.

Store materials according to Standard Operating Procedures (SOPs).

Dispose degraded and contaminated materials according to SOPs.

Input information into the inventory management system.

Carry out batch dispensing operations.

Prepare materials, equipment and solvents required for cleaning and sterilization.

Perform manual and automated cleaning and sterilisation of equipment, containers, cleanrooms and facilities.

Perform calibration and pre-startup checks on manufacturing equipment according to SOPs.

Operate filling and packaging equipment.

Identify opportunities to improve production activities within one’s work areas.

Follows proper sequence of operation, specifications and operating instructions for processing equipment.

May conduct basic tests and measurements throughout stages of production to determine control over such variables as temperature, density, pressure and viscosity.

Ensure continuous compliance to Good Manufacturing Procedures (cGMP).

Troubleshoot and resolve packaging quality issues and monitored the corrective actions.

Services, troubleshoots and solves standard engineering problems with processes or equipment already in operations.

Follows processes and procedures to ensure compliance with regulations.

Assist department in achieving company’s Key Performance Indexes (KPIs).

Follow the packaging line schedule to ensure timely delivery to customers.

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently offer the following position in our office in Singapore which will be onsite.

Overview

Responsible for directing the manufacturing operations performed in a shift or group of production lines, ensuring they reach volume, quality and cost goals. Controls production activities, material flow, and inventory to achieve cost and quality targets and production schedules of the assigned production line(s). Ensures compliance of standards. Responsible for the management and supervision of the assigned production line(s). Lead a team comprising individual professional to meet quality, cost, delivery and responsiveness requirements.

Responsibilities

Production Output

• Lead the team and work closely with supporting departments to meet production KPIs (Safety, Quality, Delivery, Inventory & Productivity), including Absorption.
• Chair the DM of SQDIP and Build Plan at Gemba
• Drive the daily top technical issues closure with engineers.
• Lead & resolve material issues (quality or availability) with the respective engineers or buyers
• Review operations and confer with technical or administrative staff to resolve production problems.

Team management

• Plan and organizes manpower and equipment to maximize productivity to meet production targets, included redeployment and OT management.
• Ensures Good documentation (GDP) is followed within the production.
• Supervises co-ordinates and monitors the performances of employees under charge
• Induct new hire and conducts performance appraisal for employees and is responsible for making decision on termination, promotion, upgrading etc.
• Develops and implements training programs to improve performance of employees. Ensures employees training compliance.
• Institute continuous improvement culture to improve the quality of workmanship standards.
• Maintain work area 5S & safety.
• Ensure the department operates under the Quality Management System and Environment, Health & Safety (EHS) requirements and to address EHS issues raised by associates.

Production Cost

• Lead in lean and continuous improvement initiatives and projects.
• Assists production manager in achieving goals and efficiency.
• Review build plan to make decision on resource deployment, inventory requirements, and work closely with Planner to meet the sale orders.
• Maintain equipment and tools calibration.

Requirements

• Diploma in Engineering/Manufacturing or equivalent field
• Minimum 2 years of supervisory experience, preferably in a medical device company with knowledge of Good Manufacturing Practice
• Advance Skill in MS Office
• Problem-solving skills
• Language proficiency in English and Chinese (need to communicate with chinese speaking associates)

What We Offer

• Equal pay is a given for us.
• Learn all there is about Kaizen, PSP's and Muda as part of our Danaher Business System (DBS) trainings - if you believe in continuous improvement like us.
• We have no room for prejudices and stereotypes. We promote equal opportunities, diversity and inclusion.
• We offer a balance between support and autonomy to achieve your own goals in an international environment.

Get More Insight

Learn more about what we do and who we are by watching our company video “We Are Leica”: https://www.youtube.com/watch?v=1zHmalqMXN4

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

·

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

The incumbent operates all equipment and facilities in his assigned area safely and efficiently. He works closely in a team and within the framework of current Good Manufacturing Practice (cGMP), Safety, Quality and Continuous Improvement.

Responsibilities

• Performs batch / unit or ancillary operations safely and efficiently following standard operating procedures and as necessary, leads technicians in unit operations. Takes in process samples and carries out checks using analytical instruments.
• Do routine mechanical and lubrication checks and where required, carries out early maintenance and repair using hand tools.
• Performs materials handling and movement using hand-pallet trucks, forklift or other material handling equipment.
• Ensures that batch and operating log sheets are correctly recorded and complied. Follows Good Documentation Practices and ALCOA+ principles when executing instructions and recording data, and adheres to Document Error management procedures if document error is observed.
• Communicates clearly with his supervisors and colleagues and at the end of his shift, hand-over to the following shift technicians highlighting production status and any items bearing on safety, quality and efficiency.
• Do engineering-related work with technicians during process runs, plant configuration during the campaign change over or maintenance using handtools. E.g.: filters change, equipment replacement and other plant-care type engineering work. Prepares plant and equipment for engineering maintenance.
• Inspects and maintains house-keeping of his assigned area for clean and safe working conditions as well as ensuring that personal protection equipment, safety and fire-fighting equipment are maintained ready for use.
• Carries out fire fighting / first-aid duties as assigned and trained.
• Carries out other related duties as assigned by the Shift Team Leader /Shift Production Leader.
• Initiate, encourage and implement Lean Sigma activities and implement JDI projects that lead to reduce overall cost and improve cost effectiveness e.g. improve equipment reliability, standardization, etc.

Knowledge, Skills & Experience

• Diploma certificate from Polytechnic
• Holder of ITC / NTC 2 or NTC 3 with some experience in related field
• Familiar with good manufacturing practices, safety procedures
• Trouble shooting skill
• Basic awareness of industrial standards
• Able to work in a fast pace environment
• Good knowledge in maintenance and operating principles of production
• Good communications skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why Us?

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organization where people can thrive. Getting ahead means preventing disease as well as treating it, and we aim to positively impact the health of 2.5 billion people by the end of 2030.


Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

JR: 387163

Job Description & Requirements

Job Responsibilities

• Plan, execute and manage production operations with emphasis on volume, quality, cost and yield.
• Ensure employees’ productivity and instill high quality standards throughout the production process.
• Determine and ensure sufficient materials are planned to ensure continuous productivity.
• Ensure consistent and effective employee relations and disciplinary management in the Plant.
• Co-ordinate with relevant groups to ensure resolution of issues.
• Ensure assembly operations, written procedures are followed and where necessary to set up new procedure and systems to facilitate and exercise controls.
• To ensure planned and routine maintenance of machines and tools.
• Maintain good housekeeping and discipline, to foster a conducive and effective working environment as well as perform duties as and when assigned or requested.
• Enforce health and safety measures.

Job Requirements

• Must possess a Technical/Engineering, Degree, Diploma or related qualifications
• Have a minimum of five years’ experience in heavy metal fabrication - Aluminium and Stainless Steel or related industry.
• Demonstrate strong leadership organizing and communication skills.
• Preferably Mandarin speaking candidates to communicate with Mandarin speaking associates
• Required skill (s) : MS Excel, MS Office
• Preferably Managers specializing in Manufacturing/Production Operations or equivalent.

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

·

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

MAIN FUNCTIONS:

• Form A license holder and other license as required by regulatory.
• Liaise with regulatory body regarding pharmaceutical compliance affair.
• To update local and overseas countries on regulatory requirement for implementation.
• Involved in day-to-day pharmaceutical manufacturing operations and ensure compliance to PIC/S GMP standard.

RESPONSIBILITIES:

• To assist in maintenance of product license with local and overseas authority.
• To prepare product registration dossier for local and overseas market.
• To assist in regulatory audits and response to the authority query.
• To assist post-marketing product query or correspondence and work closely with QA/QC department pertaining to product quality issue.
• Responsible for all dispensing materials and activities to use in production.
• Maintenance of controlled drugs and records, including the storage and sale.
• Review and update SOP relating to the production periodically.
• Together with Production Manager, handling and managing of production issue raised by the production team.
• Work together with QA to arrange training to production staff on SOP and cGMP.
• Work closely with QA/QC department to maintain cGMP standard.
• Support Beacons E-Commence project.
• Be involved in other company projects.

REQUIREMENTS:

• Candidate must possess at least Bachelor's Degree of Science (Pharmacy).
• At least 3 Year(s) of working experience in the related field is required for this position.

Other Informations:

• 5 days week
• Permanent position with 2 years contract.

Able to work well in a team

Require to operate simple machinery.

Must be willing to work overtime.

Coaching will be provided,

Capable of handling 20kg of workload.

Able to speak English or Chinese

Require to work in a warm environment

Must be willing to cooperate with others and to progress with the team

Willing to learn new skills.

The position is part of the Pall Singapore Operations team and will be located in Benoi, Singapore.

In this role, you will have the opportunity to:

• Carry out production activities which adhere to EHS and Quality guidelines, regulations, policies, procedures and 5S methodology; Operate machines/equipment at the required specifications and ensure all materials are readily available
• Support improvement efforts and assigned projects
• Work in a team environment on day-to-day operations which includes preliminary troubleshooting of machines or equipment and other appropriate duties as assigned

The essential requirements of the job include:

• Secondary educated graduate with at least 2 years of relevant manufacturing experience or NITEC graduate with at least 1 year of relevant manufacturing experience is preferred
• Able to work and communicate effectively in a team
• Flexible to work in rotating shifts and comfortable in occasional lifting or carrying of objects weighing up to 20kg

It would be a plus if you also possess previous experience in:

• Working experience in cleanroom manufacturing environment is preferred
• SAP or other ERP experience (specifically in manufacturing environment)

When you join us, you’ll also be joining Danaher’s global organization, where 69,000 people wake up every day determined to help our customers win. As an associate, you’ll try new things, work hard, and advance your skills with guidance from dedicated leaders, all with the support of powerful Danaher Business System tools and the stability of a tested organization.

Danaher Corporation and all Danaher Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

Become part of a cohesive team dedicated to delivering optimised outcomes in the dynamic hydrocarbon market under the refinery robust conditions. We are seeking a Production Control Planner who thrives in a collaborative environment and is keen to make a significant impact to the refinery production and supply chain. Both experienced and fresh graduates are welcome to apply.

Key Responsibilities:

• Coordinate with stakeholders to develop daily production plans and develop Oils Planning strategy for major Turnaround.
• Oversee execution of production plans through close coordination with Operations and stakeholders.
• Collaborate with feedstock and supply teams to ensure timely feedstock discharges and product loadings.
• Maximize refinery HVP (High Value Product) yield through blending optimization.
• Maximise revenue through proactively identifying, evaluating, and implementing optimisation opportunities
• Coordinate with stakeholders to address and resolve quality or plant issues promptly, while ensuring safe operations.
• Identify and address gaps in planning and production processes, and product qualities

Requirements:

• Degree in Chemical Engineering
• At least 3 years’ experience in petrochemical or oil refinery industry. Fresh graduates may be considered, and relevant training will be provided.
• Strong analytical, problem-solving, and inter-personal skills.
• Experience with workflow automation, data visualisation, or scheduling software will be an added advantage