Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• To further enhance Manufacturing Engineer capability in Engineering
• Oversee the Manufacturing Engineering activity in Engine Overhaul/Component Repair production areas. Act as Technical Authority, assuring the initial and continuing capability of the Production method to produce conforming product and ensuring the resolution of technical issues/problems/arisings to meet business and customer requirements for safety, cost, delivery rate and leadtime (SQCD). Support integration on all Manufacturing Engineering activities across the product lifecycle and through the supply chain.
• HSE – Practice full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm programme.
• Product Safety – Understand product safety risks and work on mitigation to meet the required safety levels supporting requirements of the Company’s Safety Management System.
• Quality – Practice a culture of zero defects ensuring that manufacturing processes and methods within the business are developed and deployed to support Right First methodology. Support process and product related Quality investigation, and manage NADCAP accreditation.
• Delivery – Ensure that manufacturing processes and methods of manufacture within the business and suppliers are developed and deployed to support/deliver Right First Time manufacture using SPS, DMAIC and System Engineering tools. Manage FAIR/MSA activities and Source & method change in the cell/area of accountability.
• Delivery – Review issues identified e.g. Troubleshoot Strip / Build, Balancing, Runout, In-situ repair, Component Repair processes and key equipment/toolings (ITT, VTL, BTG, Wash, FTB, CMM, etc), determine resolutions and reestablish the Standards.
• Cost – Support cell/area of accountability to meet cost targets e.g. productivity, CONQ etc.
• Standards – Deploy and sustain the SAESL Operating System Standards by working with the Cell/Area CFT, and where applicable with the suppliers. Identify opportunity to improve the Standards.
• Technical Authority – Specify Manufacturing Engineering and process requirements and make technical decisions in relation to the cell/area of accountability.
• Lean/Improvement – Identify requirements for improvements and innovations in manufacturing processes and methods of manufacture within their cell/area of accountability. Prioritise and promote launch of new projects based on business case. Drive manufacturing processes towards identified best practice.
• Deploy capability (including NPI) – Responsible for production readiness of new product manufacturing capabilities or methods of manufacture. Develop numerate, real time methods for capturing process capability, and ensure it is available and acted on within the facility/supply chain. Maintenance of Production Technical Packages (technical instructions, programmes, tooling, etc) for all parts/assembles which clearly define the manufacturing process ensuring manufacturing processes and/or methods of manufacture meets the requirements for quality, cost, delivery rate and lead time

Requirements

• Candidates with Aeronautical / Manufacturing / Mechanical / Industrial discipline and relevant experience.
• Willing to work in Changi

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

Key Responsibilities

• Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.
• Develops and uses procedures. Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.
• Analyze operational data; Develop and implement recommendations. Participates in and may lead audits.
• Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs.
• Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines.

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market.

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements.

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information.

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies.

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus.

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

Job Responsibilities

• To assist Engineer in collecting & compiling data for problem analysis
• Carry out basic troubleshooting & maintenance on machine
• To attend to production ‘First Defect Stop’ system on day to day issues
• Able to provide basic training to team leader / operator on machine or ‘First Defect Stop’ System
• At time to liaise with external supplier on simple improvement in machine
• To attend to any adhoc job if required

Job Requirements

• NITEC in Mechanical / Mechatronic / Electrical / Electronic or equivalent
• Prior experience working in a manufacturing environment
• Able to tabulate data and charts using Microsoft Excel
• Able to work independently with minimum supervision
• Able to perform 12 hours rotating shift work

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities

1. Helps to coordinates project activities. Will update matrix for process improvements.
2. Assists in the coordination of project schedule and task details Helps prepare reports and tracking charts,
3. Will track the progress of resources within the business unit to meet project on-time and budget performance objectives.
4. Prepares request for quotes (RFQ). Coordinates completion of the in-use and Final Sign-off (FSO) milestones with all parties.
5. Revises non-technical aspects of the Statement of Work (SOW).
6. May communicate with internal customers to determine progress against project objectives. Under supervision reports progress against stated objectives.

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Responsibilities:

• Develop and execute strategic sales and marketing plans to drive revenue growth in alignment with company objectives.
• Collaborate with cross-functional teams to ensure alignment of sales and marketing efforts with product development and manufacturing processes.
• Lead and oversee the implementation of marketing campaigns, product launches, and promotional activities.
• Analyze market trends, competition, and customer feedback to identify opportunities and formulate effective strategies.
• Manage key customer relationships and engagements, understanding their needs and ensuring customer satisfaction.
• Define program milestones, timelines, and deliverables, and monitor progress against established goals.
• Prepare and present reports, performance metrics, and recommendations to senior management.
• Ad hoc duties as assigned.

Requirements:

• Bachelor’s degree in Marketing, Business Administration, Engineering, or related field.
• At least 3 years of experience in Semiconductor Manufacturing with a focus on sales and marketing. Familiarity with semiconductor fabrication processes and technologies.
• Proven track record in developing and implementing successful sales and marketing strategies.
• Proficiency in data analysis, budget management, and project coordination.
• Results-oriented mindset with the ability to think creatively and strategically
• Strong understanding of semiconductor products, market dynamics, and customer requirements.
• Exceptional leadership, communication, and negotiation skills.
• Able to communicate effectively with suppliers and internal teams in both bilingual.
• Excellent communication, negotiation, and presentation skills, capable of establishing effective cooperation with individuals from diverse cultural backgrounds. abilities to effectively interact with customers and partners.
• Proficient in project management tools.
• Ability to thrive in a fast-paced, dynamic environment and manage multiple projects simultaneously.
• Ability to handle market competition and pressure, maintaining a positive attitude in high-intensity work environments.
• Resourceful and meticulous.

Responsibilities:

1. Developing Quality Standards

• Establishing and maintaining quality standards, policies, and procedures to ensure compliance with industry regulations and customer requirements.

2. Quality Management Systems (QMS)

• Develop, implement, and maintain comprehensive QMS in compliance with relevant standards & regulations, such as ISO9001 and industry-specific requirements.
• Implementing & managing QMS to continuously improve processes, reduce defects, and enhance overall product quality.
• Set quality strategies to drive company quality culture and quality improvements in process, product, and system.

3. Supplier Quality Management

• Collaborating with suppliers to ensure materials and components meet quality standards and conducting audits as needed.
• Maintains strong supplier quality relationships and drive supplier performance improvements.

4. Quality Assurance

• Creating and executing quality assurance programs, including testing protocols, inspection procedures, and product evaluations.
• Provide headship and consulting advice in quality matters.

5. Quality Control

• Establish and oversee quality control procedures & inspection processes to ensure product and service quality meets or exceeds customers expectations.

6. Data Analysis and Reporting

• Analyzing quality data to identify trends, issues, and areas for improvement. Generating reports and presenting findings to senior management.
  

7. Team Leadership

• Leading and mentoring a team of quality professionals, fostering a culture of quality excellence, and providing guidance on best practices.
• Lead a team of metrology specialists, inspectors, and engineers to manage day-to-day product inspection and buyoff.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

8. Regulatory Compliance

• Ensuring compliance with industry regulations and standards (e.g., ISO, SEMI, customer-specific requirements).
• Plan and lead manufacturing process audit.
  

9. Continuous Improvement

• Driving continuous improvement initiatives, implementing corrective and preventive actions, and fostering a culture of continuous learning and improvement.
• Promote a culture of continuous improvement and lean methodologies, identifying opportunities to streamline processes and enhance quality & efficiency.

10. Cross-functional Collaboration

• Collaborating with crossfunctional teams, including engineering, production, and R&D, to resolve quality-related issues and optimize processes.
  

11. Risk Management

• Identifying and mitigating quality-related risks throughout the manufacturing process.
• Lead Corrective and Preventive Action Board to drive robust manufacturing system and process quality to meet internal and customer requirements and expectations.
  

12. Customer Focus

• Interacting with customers to understand their quality requirements and address any concerns or issues related to product quality.
• Support Customer Quality Engineering to investigate customer product complaints.

13. Budgeting and Resource Allocation

• Managing budgets and resources effectively to achieve quality objectives.
• Responsible for quality KPIs and reporting to senior management.
  
  

Requirements:

• Bachelor in Engineering (Quality, Mechanical, Electrical, Electronics, Chemical, Engineering, Material Science) or a related field.
• A minimum 10 years of experience in quality management & assurance. Preferably from manufacturing semiconductor/manufacturing or electronics or high- tech instrument industry setting.
• Professional & strong knowledge of QMS & ISO Standards in a semiconductors/manufacturing environment.
• Familiarity with applicable regulatory and certifications requirements.
• Quality Auditor Certification is a plus.
• Good knowledge and practice Lean, FMEA, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations.
• Good understanding and experience in metrology management.
• Good understanding and experience in supplier quality management.
• Strong in analysis techniques and problem solving methodology.
• Must be able to communicate effectively with internal and external teams in both bilingual.
• Strong analytical problem solver with demonstrated ability to exercise sound judgment while working independently to resolve critical issues.
• Detail oriented and able to multi-task/work under pressure in a high energy and fast paced-environment with critical and tight schedules.
• Comfortable work in Changi North Crescents.

Responsibilities:

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products.
• Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.
• Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements.
• To reduce manufacturing and/or product costs, and improve delivered product quality.
• May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies.
• Participates in the development and maintenance of new and existing business processes.
• Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.
• Provide technical support for the installation, commissioning, and maintenance of mechanical systems.
• Stay current with industry trends and advancements in semiconductor manufacturing technologies.
• Foster and maintain strong relationships with clients, suppliers, and contractors, ensuring smooth project execution.
• Perform other duties and responsibilities as assigned.

Requirements:

• Degree/Diploma in Mechanical Engineering or a related field.
• Good Knowledge in PFMEA, Process Change, Solidworks, Pro E, AutoCAD and a strong sense of Engineering Fundamentals are preferred.
• At Least 3-years of technical experience in the field, preferably within a Semiconductor Manufacturing environment; candidates with expertise in other industries and solid equipment knowledge are also encouraged to apply.
• Degree with min 3 years design experience and Diploma with min 4 years design experience.
• Good design experience in Machine Automation, Robotic Systems, Material Handling Systems and good to have experience in Fixtures & Tooling.
• Able to work Independently under minimum supervision and exhibit proactiveness in learning.
• Self-motivated and able to meet deadlines.
• Strong analytical and problem-solving skills.
• Familiarity with industry standards & regulations related to semiconductor manufacturing.
• Must be able to communicate effectively with internal and external teams in both bilingual.
• Candidates who are immediately available/ able to start work within short notice will be preferred.

Responsibilities:
1. Document Management:
- Create, revise, and manage quality documents, including standard operating procedures (SOPs), work instructions, and quality manuals.
- Maintain an organized and easily accessible document repository.

2. Quality System Compliance:
- Ensure that all quality documents adhere to regulatory requirements and industry standards.
- Collaborate with Quality Engineers to update documentation based on process changes or improvements.

3. Version Control:
- Implement and manage a version control system to track revisions and changes to quality documents.
- Monitor and communicate updates to relevant stakeholders.

4. Audit Support:
- Assist in internal and external audits by providing requested documents and ensuring documentation compliance.
- Address any audit findings related to document control processes.

5. Training and Awareness:
- Conduct training sessions for team members on document control procedures and best practices.
- Promote awareness of the importance of accurate and up-to-date documentation.

Requirements:

1.Qualifications:
- Bachelor's degree in a relevant field (Quality Management, Engineering, Business Management or related discipline).
- Proven experience as a Document Controller, preferably in a semiconductor manufacturing environment.
- Familiarity with quality management systems and standards (ISO, SEMI).
- Strong attention to detail and organizational skills.

2.Skills:
- Proficient in document management software and Microsoft Office Suite.
- Excellent communication and collaboration skills.
- Ability to work in a dynamic and fast-paced manufacturing environment.

3.Preferred:
- Certification in document control or quality management.
- Knowledge of semiconductor manufacturing processes.

Responsibilities:

• Provide sustaining support for deployed fixtures to ensure minimal down time and customer impact.
• Coordinates/Performs test fixture PM and Calibration activities as scheduled and follows-up on OOT issues as required.
• Interfaces with other test engineers and customers to coordinate the deployment of new test fixtures. Begin evaluating, designing and project managing own test fixture projects and solicit assistance as needed.
• Documents and tracks deployment issues to closure and initiates appropriate engineering change request as required.
• Uses basic engineering principles to estimate and reduce test fixture development costs and improve delivered fixture quality;
• Develops and uses test procedures. Assists with the definition of test specifications with design, software, and manufacturing engineering. May assist in the coordination and/or execution of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may take corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.
• Determines root cause and corrective action analysis for issues that arise during design and deployment of test fixtures and provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product/Fixture Development.
• Stay current with advancements in testing methodologies and technologies within the semiconductor industry.
• Perform other duties and responsibilities as assigned.

Requirements:

• Diploma/Bachelor's degree holder in Electrical, Electronics, Mechanical, or a related field.
• At least 3-year working experience in testing engineering role & Proven experience in test engineering, preferably in semiconductor manufacturing.
• Knowledge in C/C++ Programming, PLC Programming, Java, Functional Tests and Hardware Troubleshooting.
• Strong knowledge of test equipment, data acquisition systems, and testing methodologies.
• Analytical & problem solving skills with attention to details.
• Investigative mind, paying attention to small details and good observer.
• Strong analytical skills, able to identify discrepancies during the test process
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player.
• Must be able to communicate effectively with internal and external teams in both bilingual.
• Candidates who are immediately available/ able to start work within short notice will be preferred.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Establish and write company policies and procedures to comply with Country Customs and other governmental agency requirements for import and export activities.
• To interface with the relevant Customs Department, Freight Forwarder and Vendors in order to meet the shipping schedule and target achievement.
• Provide oversight and review of production contract application and closure processes in conjunction with country Finance and Materials department.
• Ensure the import and export activities are monitored and reviewed for accuracy and in compliance with country laws and regulations, rules, policies and procedures.
• Provide training on country customs requirements and procedures of country import and export activities to all appropriate company departments and personnel.
• Establish and maintain the level of relationship with country governmental agencies responsible for foreign trade and customs required to communicate the company commitment to compliance with all applicable governmental laws, regulations, rules, policies and procedures.
• Ensure that country governmental agencies responsible for foreign trade and customs are provided with the level of information about the company that they require to perform their functions and formalities.
• Monitors proposed changes in import and export rules, policies, procedures, regulations and laws and assess the impact for those proposed changes on the Company business.
• Ensure that company policies and procedures reflect any changes in country customs laws, regulations, rules, policies and procedures.
• Interface with Corporate logistics team to resolve issues associated with shipment out to the respective countries, ensuring best shipmen routing is well executed and to monitor the performance through indicators and metrics.
• Establish company standards of service providers (freight forwarder, customs brokers, trucking company etc) retained to assist with the supply chain.
• Manage and coordinate activities and services provided by Company agents to ensure that all documentation and services provided are accurate and maintain the standards required by Company.
• Delegates and organizes departmental workload according to project assignments and needs.
• May perform other duties and responsibilities as assigned.

Job Requirements:

• Bachelor's degree in Logistics, Supply Chain Management or a related field.
• Proven experience in logistics and customs management within the semiconductor industry.
• In-depth knowledge of Singapore customs regulations and international trade laws.
• Strong understanding of semiconductor supply chain processes and challenges.
• Good communication and negotiation skills for effective collaboration with internal team and external partners.
• Demonstrated ability to optimize logistics operations, improving efficiency and reducing costs.
• Must be able to communicate effectively with suppliers and internal teams in both bilingual.
• Proficient in using logistics management software and tools.
• Strong leadership skills with the ability to motivate and guide a team.
• Detail- oriented with a focus on accuracy in customs.
• Ability to adapt to changing regulatory environment and industry trends.

Job Responsibilities

• Responsible for maintaining accurate costing processes for production and materials.
• Responsible for standard costs for raw materials, packaging, machinery and finished goods and update variance analyses.
• Analyse manufacturing costs, overheads, purchase price and COGS variances.
• Manage cost-related budgets and perform variance analyses.
• Generate periodic reports for management, analyzing factors affecting product prices and profitability.
• Any ad-hoc duties as assigned.

Requirements

• Degree/Diploma in Accounting or ACCA or relevant accounting qualification.
• CPA/CMA would be advantageous.
• Proficient in Excel, Word and Power Point and SAP/ERP systems.
• At least 5 years of relevant experience in Manufacturing and Costing.
• Responsible and good communication skill.
• Detailed and meticulous.
• Candidates without Costing experience need not apply.

Job Description

The successful candidate will join the Maintenance Planning & Cost Control Department in SIA Engineering Division. You will be part of the team that oversees Maintenance Planning.

Key Responsibilities include:

• Ensure accuracy of Aircraft Maintenance Schedules

• Review all updates of the Airbus/Boeing Maintenance Planning Document (“MPD”) upon notification by QD, and prepare the MS amendment documents (MSA form, Amendment Records, supporting documents, Checklist) for submission to AO for review

• Upon the approval of the MS Amendment, prepare the updated MS and liaise with PDD to update the changes in SAP

• Create bridging tasks as required

• Continual amendment of the MS based on feedback and in-service experience from operational departments, as well as changes arising from retrofits

• Review the list of new equipment created and ensure that PDD creates the MPlans for Hardlife components

• Maintenance plans for Hardlife equipment are created and kickstarted

• Yearly Process Improvement submissions and Staff-Ideas-in-Action (S-I-A) Submissions

• Support necessary projects/task

Requirements:

• A diploma in any discipline.

• Must have knowledge and relevant experience of Maintenance Planning administration and procedures.

• Well-versed with aircraft maintenance documents such as MPD, Approved Maintenance Schedule (AMS), Aircraft Maintenance Manual (AMM), Illustrated Part Catalogue (IPC), etc. to understand task card requirement. Knowledge of the different aircraft systems and familiarity with aircraft diagnostic tools such as Aircraft Health Monitoring (AHM) and Airman would be an advantage.

• Must be familiar with SAP & MS Office suite of products

• Good verbal and written communication skills.

• Must be motivated, driven and be a team player and able to work independently.

Job Description

Responsible for providing clerical and administrative support to the production department. This role involves performing routine admin tasks to assist in the efficient operations of production activities and accurate records maintenance.

• Data Entry and Admin - Input and maintain accurate data related to production activities such as employees' attendance records, raising claim reimbursements (using standard excel template) and maintain proper filing of documents.
• Performing production related transactions using SAP system
• Assist in the communication with the warehouse team on material- related transactions
• Providing updates to production planner, senior admin and production team regarding system transactions and completion via emails and phone calls.

The Requirements:

• At least a GCE ‘O’ Level or its equivalent
• Strong attention in details and accuracy in data entry
• Good communication skill and able to work collaboratively in a team
• Proficient with computers and in using MS word, Excel.
• Work experience in SAP preferred.
• Eagerness to learn
• Able to work overtime when required.

Other information:

• Working Hours : 8.15am to 5.30pm (Mon-Fri)
• Location : Changi North
• Company Bus : Pick up at Ang Mo Kio, Yishun, Hougang, Punggol, Pasir Ris, Bedok, Tampines MRT/Interchanges

Interested candidates are invited to apply online with an updated resume. Please indicate the below information in your resume:

• Education Background
• Work experience
• Current & Expected salary
• Reason(s) for leaving current/previous job
• Availability / Notice Period

We regret that only shortlisted candidates will be notified.

Thank you for applying!

· Handle sales activities/quotations for assigned account.

· Handle and grow existing customers/ new development customers (Machining and Contract Manufacturing) with strategic growth of 15%-20%.

· Manage customer account status & credit control for assigned account.

· Achieve assigned sales target and consistently follow up for purchase order after quotation is submitted to customer.

· Work with cross functional departments for customer request /new RFQ as per SOP0038.

· Review order fulfilment as per SOP0039 and back-up support for sales coordinator in order fulfilment that enable smooth daily operations.

· Maintain & service customers satisfaction as per SOP0040.

· Review consolidation of pricing & forecasting and work with customers in fulfilling the forecast.

· Participate in weekly / bi-weekly / monthly sales call with customers with the aim to ensure business needs are on schedule and to arrest any potential / new issues by customers relating to sales and revenue.

· Understand and work with multi-level bill of materials (BOM).

· Collaborating with the design, production, supply chain, engineering or R & D departments of the company to determine how products and services could be made or modified to suit the needs of the customer.

· Selling on technologically and scientifically company core capabilities to covert to product sales.

· Maintain and ensure Sales and Marketing annual operating budget did not exceed per HOD prevailing directive.

· Managing close relationship with various departments taking deliverables as top priority.

Any other ad-hoc duties as assigned by supervisor.

Minimum Diploma in Mechanical/Manufacturing Engineering or its equivalent.

Minimum 1 year of relevant working experience.

1. Technical and Technological Skills

· Knowledge in Navision system platform.

· Strong oral and written communication skills.

· Basic MS Office proficiency.

· Provide quality customer service that meets customer needs and expectations.

· Able to accomplish sales-related reports and presentations.

2. Personal Qualities (Soft Skills):

· Customer-focused and results-driven.

· Able to work in different time zone for customers weekly conference calls.

· Able to work independently or with the team.

· Good communication and interpersonal skills in building and maintaining both internal and external relationships.

· Open to explore and decipher new things for professional growth.

Our client, a US listed multinational corporation located in the Eastern part of Singapore, is seeking suitable individuals to join as Manufacturing Technicians, working either the morning shift or afternoon shift.

To do the work of an Manufacturing Technician, you need to possess:

• NITEC or Higher NITEC or diploma in Engineering or related discipline
• Good work attitude
• Eagerness to learn

Job scope:

• Utilize routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
• Perform electro-mechanical assembly operations. This includes identifying and correcting errors, thus troubleshooting and repairing as necessary.
• Utilize test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components and thereafter, enter on computer terminals data such as progress, work expense and labor details.
• Receive parts and perform audits (inspecting parts for defects) to ensure all necessary parts are available to perform build, test and repair.
• Troubleshoot and improve processes.

If you are keen in this job, please click the "Apply" button or email your detailed Word-format resume to [email protected], quoting “Manufacturing Technician” as the subject matter.

Job DescriptionOverall responsibilities

1.1. Responsible to lead two teams of production operators/sewer to meet daily production targets, schedule and quality standards

1.2. Plan workflow on the production teams to achieve production targets

1.3. Draw up duty roster for operators/technicians; allocating work and authorize overtime which is justified by capacity planning and reporting

1.4. Motivate and guide the operators and technicians, maintain discipline and manage their performance appraisals

1.5. Responsible for the safety and security management of the production floor

1.6. Initiate action to prevent the occurrence of any non-conformity relating to the product, process and quality system

1.7. Identify and record any problems relating to the product, process and quality system

1.8. Responsible to initiate the daily production scheduler meeting and attend the daily operations meeting

Job Descriptions

• Assist the department head of Quality in the implementation of and maintenance of the Company Quality Management Systems (QMS) in accordance with ISO 13485 standard and other applicable regulatory requirements.
• Assist the department head of Quality to coordinate external audits conducted by customers and notified/ regulatory bodies. Work with various departments to ensure timely closure of any audit findings or observations.
• Coordinate Engineering Change activities in compliance with Engineering Change procedure and ensure correct revision of drawings, specifications, and documents.
• Ensure all quality documents and records are kept in compliance with Document Control and Record Control procedures.
• Conduct New Employees’ Orientation (NEO) Training on Quality Policy, Quality Objectives, Good Documentation Practice and Data integrity, Document Control and Record Control.
• Consolidate quality data, quality issues and trends for monthly quality metrics reporting.
• Assist department Head of Quality to prepare Management Review semi-annually.
• Track CAPA and any actions arising from Internal Audit, coordinate with responsible parties to ensure timely closure of action items.
• Liaise with 3rd party Notification or Regulatory Bodies for certification and regulatory activities. Track and monitor Regulatory Bodies, such as FDA/ HAS for regulatory updates or any changes to their requirements.
• Perform other tasks as assigned by the Supervisor

Requirement:

• Diploma in Engineering, Science or equivalent

Experience:

• Minimum 1 year working experience in quality management systems and applications.
• Knowledge and experience working within a regulated and structured environment.
• Work experience as Quality System Executive in a medical device manufacturing environment. (Candidates with more experience can be considered for Senior Quality System Executive position)
• Experience with handling ISO13485 audit as an auditee

Skills :

• ISO13485 Internal Auditor
• Root cause analysis (Kepner- Tregoe, 5-Why, 6M etc)
• Problem solving techniques (eg: DMAIC/8D/PDCA/A3 application in continuous improvement)
• Competent with general PC and office software application
• Proficiency in MS Office.

Essential Responsibilities:

• Design/develop/substantiate/implement new repairs
• Ensure internal shop documents are kept current with the latest repair documents and flow changes to appropriate personnel
• Generate, change/update OP sheets, routers
• Track or collect data on yield and identify opportunities to improve yield; conduct new material tryouts; review process for improvements.
• Conduct salvation reviews
• Raise and follow thru with Departure Records approval, work with REDO or GEAE engineers to enhance tech issue resolution process
• Plan and manage product transition related activities
• Provide work scope for customers, draft responses to customers’ queries
• Investigate and answer QPR/CARs
• Where applicable, act as subject matter expert to design and develop appropriate OJT for shop CRTs
• Engagement in Six Sigma, bullet train activities; lead cluster activities
• Up-to-date technical/engineering documents and new business opportunities for company
• Ensure up-to-date manuals are deployed for use – compliance.
• Proper flow down of technical operating documents for CRT use.
• Up-to-date technical/engineering documents and new business opportunities for company.
• Ensure up-to-date manuals are deployed for use – compliance.
• Proper flow down of technical operating documents for CRT use.
• Customer benefit for business growth, productivity for shop.
• Customer benefit, yield improvement and additional business for organization.
• Ensure technical issues are resolved expeditiously for business.
• Ensure proper technical qualifications are completed for either transitions in or out of GEASO.
• Customer interface; know customer requirements.
• Compliance/Customer Satisfaction – timely response & closure.
• Skills development & enhancement for shop CRTs.
• Support business productivity & cost efficiency drive efforts.

Qualifications/Requirements:

• Bachelor's degree in Mechanical/Aerospace or related Engineering fields.
• 3-5 years of experience in manufacturing environment is required.
• Aviation maintenance repair and/or overhaul environment preferred.
• Relevant internship experience is highly desirable.

Desired Characteristics:

• Strong oral and written communication skills.
• Strong interpersonal and leadership skills.
• Ability to work independently.
• Strong problem solving skills.
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker