Reporting to the Senior Production Supervisor, the role of Production Supervisor would need to perform the following. 

General Function

• Immediate supervisor of all the production workers in the plant.
• To supervise, motivate, train new employees, maintain discipline, control manpower deployment, reduces overtime, maintains good working relationship with subordinates and to study ways to improve the section to increase high output and quality standard.
• To ensure workers carry out/follow up on instructions given

Responsibilities
 

PRODUCTION PLANT

• Record daily attendance and report to immediate supervisor of medical leave, absence, lateness, annual leave taken by the workers.
• Submit monthly attendance incentive/overtime to immediate supervisor for approval.
• Informed of unusual happenings major or minor incidents, accidents, hazardous situations or any other problems to immediate supervisor.
• Other ad-hoc duties as assigned

RAW MATERIALS

• Achieve the daily production schedule set target and ensure the appropriate stock of manufactured products for division are maintained.
• Ensure the procurement of raw materials and packing materials is sufficient to meet the requirement of the section.
• Responsible for production process control for the division.  Co-ordinate for product trouble shooting in plant, monitor change of mixing instruction procedures for product, if necessary.
• Responsible for monitoring the stock level of all materials and packing materials are properly identified, marked and stored.
• Ensure that the mixing instruction procedure materials as specified on the B.O.M. are strictly followed, correct use of machinery and equipment by operators must be supervised.
• Ensure that raw materials used by operators follow the B.O.M production sheet.  Any discrepancy must be rectified immediately.
• Ensure that raw materials stock is updated and an accurate physical count if and discrepancy is spotted.  Conduct physical count on all materials twice a year.

MACHINE MAINTENANCE

• Responsible for the maintenance of all the machineries and equipment in the plant are clean at serviceable condition.  Keep a record of all break-down and report of machinery malfunction.

SAFETY

• Ensure the plant is kept clean as good housekeeping should always be practised.
• Factory equipment, light, fans etc are switched off and all mixing vessels are emptied or valves secured, bungs intact before factory are left unattended.
• Responsible for training workers on handling chemical spillage and emergency response activities.  All new workers are to be familiarized with all aspects of safety, according to the new employee induction procedure checklist.  Upon completion of the induction, the immediate supervisor and the new employee must sign the form.
• Ensure that workers are instructed and follow the procedures as prescribed for hazardous-chemical handling
• To ensure that workers, visitors and contractors wear appropriate safety protection equipment within the factory premises.
• To ensure first aid kit is well maintained and replenished when necessary.
• To ensure that fire extinguisher, spill/chemicals and other safety equipment are well maintained and replenish when necessary
• Forms a part of safety committee.
• Ensure that workers are following safety procedures, rules and regulation. Report all incident and accident.
• Ensure all workers are adequately trained in the safe and correct use of machine and equipment in the plant.
• To submit the following reports to immediate supervisor:
  • Monthly production output
  • Overtime report including reason for working overtime
• Accurate compilation of workers’ time sheet

Job Description:

1. In charge of the preparation of reagents, calibration materials, and quality control products, strictly follow SOP, keep all records in the receipt, review, and use of raw and supplementary materials, monitor the stock condition and work with procurement team to replenish accordingly.

2. Responsible for the collection and bookkeeping of raw materials, auxiliary materials, packaging materials, etc. for production.

3. Responsible for filling in production logbook to ensure that the data is true, complete and accurate.

4. Ensure production equipment, facilities and production environment can meet production process and regulatory requirements.

5. Ensure employee working environment and quality in strict accordance with the system and regulatory requirements.

6. Strictly comply with laboratory-related operation and quality management requirements.

7. Collaborate with cross-functional teams to meet projects goals with overall organizational objectives.

8. Any other ad-hoc duties or projects as required by the management team.

Job Requirements:

1. Majoring in biology, medicine, laboratory science, immunology, pharmacy or quality engineering are preferred.

2. A bachelor's degree. Fresh graduates are welcome to apply.

3. Experience in IVD, controlled environment production, quality system, R&D and etc.

4. Expertise in the operation and maintenance of lab instruments and data systems.

5. Understand the relevant requirements of the production quality system for in vitro diagnostic products.

6. Familiar with in vitro diagnostic products such as lateral flow immunoassay, PCR, Immunoassay etc.

7. Familiar with IVD product development and commercialization life cycle.

8. Systematically project management, good planning, execution and timely communication. Good presentation skills.

9. Enthusiastic, proactive, and down-to-earth work attitude, strong communication & execution ability, results driven, and a team player.

10. Meticulous and strong sense of responsibility; able to handle stress and tight schedule.

Working Days / Hours: 5 days work / 8am to 5pm

• Competitive salary and benefits package.
• Opportunities for professional development and career growth.
• A collaborative and innovative work environment.

Key Responsibilities:

• Assemble and test products to ensure compliance with all specifications.
• Collaborate with supervisors and engineers to meet quality, waste reduction, and efficiency targets.
• Diagnose and resolve issues with faulty products or components to maintain specification standards.
• Implement improvement initiatives focused on quality and operational efficiency.
• Ensure adherence to documentation standards for ISO 9001, MDSAP, ISO 14001, ISO 13485, QSR 21 CFR Part 820, and ISO 45001. Maintain workplace housekeeping and safety standards.
• Provide training for Technicians and Associate Technicians in product assembly and testing procedures.

Qualifications:

• NTC3 certification or a diploma in Manufacturing or a related field.
• Strong attention to detail and ability to adhere to standard operating procedures (SOPs).
• Excellent communication and teamwork abilities.
• Proficiency in equipment troubleshooting is a plus.
• Capability to work independently while managing multiple tasks at once.

Interested applicants, kindly click Apply or send you resume to [email protected]

We regret that only shortlisted applicants will be notified.

Rapid Recruitment Asia Pte Ltd (16C8261)
Loh Yi Zhen, Shennon (R1106592)

Responsibilities

· Handle Store and coordinate with Production team for material issuance

· Maintain inventory and monitor all material issuances

. Monitor all material status and update material status for production plan

· Handle export shipping documentations

· Experience in oil & gas industry will be an added advantage

· Coordinate and arrange with forwarders/customers/suppliers on shipping related issues

· Monitoring of incoming/outgoing shipments

Qualifications

· ITE or its equivalent

· Minimum of 5 years logistic/shipping experience

· Valid Driving licence

· Able to work in a fast-paced environment

. Meticulous with positive working attitude

Requirements:

This job requires candidates to have the following requirements before applying.

1. To hold a degree (min second class lower) in either physical chemistry/ chemistry/ advance chemistry/ applied chemistry/ materials science/ materials engineering/ any field related to chemistry

2. Strong knowledge in chemistry basics and able to write chemical equations at ease

3. Well versed in English and be able to read and write Mandarin, to liaise with clients who can converse in Mandarin only

Preferred Qualifications:

· Hold any chemical or related hazardous substance (HS) licences

· Hazmat licence or HTDP

Expected Duties:

He or she before be able to:

1) To have some knowledge in handling minimum one of the testing equipments such as AAS, ICP (OES), ICP (MS) and fire assay.

2) Carry out research on upcoming projects, improving SOP in chemical testing methods.

3) Provide write up instruction manuals on proper chemical testing and processing procedures including , type of chemicals to be used, mixing times, operating temperatures as future SOP for chemical testing and assaying methods in an analytical approach.

4) Prepare compounds, reagents, and solutions used in laboratory procedures in a safe manner. To prepare new standards of Lab safety rules.

5) Preferred to have some knowledge in electrolysis and electro plating and comfortable in handing chemicals such as potassium cyanide or sodium cyanide.

6) Provide timely and regular technical and assay reports to describe yours methods and findings. To present these findings to customer, engineers, managing directors, directors and other colleagues whenever necessary.

7) To be able to travel occasionally offshore for very short trips on assay witnessing work or related duties

Working Environment:

Air conditioned wet laboratory , non air condition assay room and air conditioned general office

Job Summary:

Job Summary

· Training Provided

· Excellent opportunities for progressive learning and development

· Attractive remuneration and benefits package

Key Selling Points:

5 working days, work life balance working environment

AWS, variable bonus and yearly increment

Good staff benefits; lunch provided, allowances, insurances, dental & medical

The Opportunity:

· Location: West, Singapore

· Basic Salary: Up to $2,300 (Based on experience)

· Working hours: 12 hours per shift, following 3443 schedule, rotation shift of 8am – 8pm or vice versa.

Responsibilities:

Functional:

· Oversee and manage activities in the QC labs and associated areas, including:

QC Change Room

Sample Retain Room

Inventory Room

Other areas as per site layout

· Execute QC procedures (SOPs) for conducting lab analysis.

· Prepare and maintain instruments used in the laboratory.

· Collect raw material samples from the plant.

· Maintain general housekeeping of the lab.

· Assist supervisors in setting up new analytical methods and techniques.

· Ensure all data is accurately generated according to SOPs and transferred to SAP.

· Review and validate test results against predefined specifications.

· Promptly report abnormalities to the manager.

· Ensure safe work practices in the lab and surrounding areas.

· Comply with ISO 9001:2015 and ISO 14001:2015 standard requirements.

· Perform additional tasks as required.

EH&S (Environmental, Health & Safety):

· Adhere to lab safety procedures and comply with site safety regulations, processes, and work guidelines to ensure personal and colleague safety.

· Serve as a safety role such as First Aider, EHS Committee Member, or Fire Warden when appointed.

· Maintain and update the Material Safety Data Sheets (MSDS) for the laboratory.

Requirements:

· Excellent attention to detail and ability to follow SOPs accurately.

· Ability to work rotating shifts including nights, weekends, and public holidays.

Next Step:

· Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.

· Simply click on 'Apply here' to drop your resume

• To assist in Engineering and drafting related works.
• To plan production schedule, machine loading, and machine maintenance, upkeep of all relevant records and etc. to achieve high productivity, production output, product quality, short manufacturing lead-time and low/competitive cost structure and maximize all production resources to enhance company’s competitiveness in manufacturing lead-time and costing.
• To prepare, collate and analyze production job schedules, status reports and production related correspondences.
• To work closely within production teams to determine the inventory level and production output for the project.
• To be involved and assist in material and hardware sourcing and procurement.
• Able to manage multiple projects concurrently.
• Effective deployment of resources to achieve production output, productivity, product quality.
• Plans production schedule, machine loading, mold and machine maintenance, upkeep of all relevant records and etc.
• Initiates and drives for continuous process improvement for all products and ensure process capability for new products/material.
• Maintains high level of security practices within the production facility and instil basic security awareness among employees.
• Develop new work procedure and work instruction pertaining to 5S requirement, maintenance of work procedure.
• Ensures that the workplace conforms to regulations regarding security practices, worker safety and industrial waste.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

PRIMARY FUNCTION

• Provides support to the Manufacturing organization to facilitate the efficient operations within the production area
• To optimize existing processes and to ensure that production goals are met
• Ensures attainment of level of production and activities on an hour-to-hour, daily, monthly and yearly basis
• Monitors performance of equipment, machines, tools and corrects equipment problems or process parameters that produce non-conforming products, low yields or product quality issues.
• Interfaces with Quality and Research & Development organizations to integrate new products and/or processes into the existing manufacturing area
• Ensure manufacturing production requirements are met in terms of utilities supplies and engineering support.

MAJOR RESPONSIBILITIES

• Responsible to manage and focus directly on GMP food safety engineering/food security and validation, in preparation for the commercial production of regulated products.
• Responsible to perform quality events investigation and developing CAPA actions. Ensuring the effectiveness of CAPA action.
• Interface with other departments and suppliers to address root causes.
• Support in the review new standard policies and perform gap analysis with existing policies. Recommend solutions to bridge the gaps.
• Support project execution of facilities and equipment and optimization of existing manufacturing processes to deliver products with the production requirements consistent with Gold Standard Policies.
• Responsible to motivate and train employees for manufacturing related activities.
• Lead incident reviews to investigate and correct microbiological non-conformities and provide recommendation regarding process design, product disposition and continuous improvement.
• Optimize the documentation for quality systems, cleaning and validation, SOPs, HACCP plans, and food safety policy and protocols.
• Ensures plant Food Safety documentation is maintained in an audit-ready state, meeting all statutory, regulatory requirements & customer expectations.
• Ensures the effective use of materials, equipment, and personnel in producing quality products at an effective operating cost.
• Responsible for compliance with applicable Corporate and Divisional Policies and Procedures.
• Prepares reports, publishes, and makes presentations to communicate findings.
• Implement, document, and maintain controlled, repeatable production processes.
• Understands the business needs of the company and has knowledge of the customer needs of our business.
• Cultivates internal and external network of resources to complete tasks.
• Any other duties as assigned by supervisor.

REQUIREMENTS

• Bachelor's Degree in Chemical Engineering, Mechanical Engineering, Biotechnology, Microbiology or a related discipline is preferred.
• Possess 1-4 years of experience
• Experience and proficiency in investigation record writing will be highly advantageous
• Knowledge in SAP system/POMS/MES is preferred
• Knowledge in food microbiology and food safety is preferred
• Understanding of engineering principles, theories concepts, practices and techniques.
• Adaptable and efficient decision-making

*Kindly note this position is based in Tuas

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

We are looking for an intern for 2 months for our production arm, Prodigious. You'll be assigned to the account servicing team. You’re driven to learn and understand the job function of the client servicing team include performing fairly menial tasks which are part of client servicing scope. Ability to multi-task and follow through on projects with cross-reporting to key stakeholders.

Expectations of an Account Servicing Intern

• Responsible for administrative tasks including but not limiting to billing invoices, preparing cost estimates, quotation, writing minutes, deck beautifications etc. 
• Support supervisor in project management include updating project briefs and timeline
• Coordination work during pre and post shoot

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

Job Description

· Responsible for troubleshooting, repairing, and servicing production machineries, equipment, systems, and infrastructures.

· Responsible to ensure machinery and equipment runs smoothly and reliably. Minimize machine downtime.

· Able to perform Preventive and Predictive TPM.

· To be able to monitor and control maintenance costs.

· Dealing with emergencies, unplanned problems, and repairs of machines breakdown

· Using Root cause analysis tool to analyze the cause of the breakdown.

· Maintains safe and clean working environment by complying with procedures, rules, and regulations.

· Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs.

· Contributes to team effort by accomplishing related results as needed.

· To liaises with external contractor work.

Requirements

· Able to work 3 Rotative Shifts / Weekends.

· Candidate must possess at least minimum NiTEC in Engineering (Electrical/Electronic/Mechanical/Mechatronic)

Advantageous if experienced working with:

· PLC's, HMI's systems e.g., Siemens, Omron, Keyence.

· Production equipment and CNC machines

· Hydraulic/pneumatic controls, actuators, ball-screw and slide assembly and spindle repairs.

· Able to read, interpret machine drawings, procedures, Electrical / Mechanical schematics, drawings, wiring / block diagrams.

Sanofi Manufacturing and Supply Organization is preparing its future through an ambitious program named EVolutive Facility (EVF). The EVF Project is at the cornerstone of Sanofi strategy as it aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable and agile, leveraging new disruptive technologies, to better address vaccine business challenges as well as Specialty Care Biologics products. One of these two EVF is implemented in Singapore in a new Greenfield site, with a design identical to the one in Neuville (France). The facilities will also have highly digitalized and automated capabilities which is a key

enabler for operations using technologies such as autonomous guided vehicles, cobots and cloud systems.

Sanofi’s Greenfield Graduate Programme (Manufacturing)

This development programme is within the Sanofi’s ambitious EVolutive Facility (EVF) project in Tuas, Singapore. The successful candidate will have the opportunity to be part of the pioneer batch

of the manufacturing team. This candidate will have significant learning and developmental opportunities to work cross functionally with departments such as Manufacturing Science And Technology (MSAT) team, Supply Chain, Quality Assurance and Engineering.

This role will have the title of Biotechnologist, Manufacturing. The role will report to the Manager, Manufacturing and receive coaching throughout the program duration. The program’s scope includes active participation in EVF Greenfield project in Singapore and eventually will be part of the manufacturing team of Sanofi to perform the engineering, Process Performance Qualification (PPQ)

and commercial batches.

During the project phase (up to 18 months), the Biotechnologist, Manufacturing will participate in the design and execution of the following:

• Engineering / Commissioning & Qualification activities of manufacturing equipment and systems
• Operational and Digital Readiness for manufacturing systems and workflows
• Technology and Process Transfer activities from overseas Sending Unit
• Beyond the project phase, the Biotechnologist, Manufacturing will have a routine operational role
• consisting of the following:
• Routine GMP manufacturing activities in the operational manufacturing team
• Regulatory and audit readiness and preparation
• User of digital and automation applications and software related to manufacturing systems
• Participation in continuous improvement and optimization projects

The scope and seniority of the candidate after the project phase will be reflective of the individual demonstrated interest, capability, and performance during the initial project phase of the program.

Sanofi EVF Singapore is hiring for Biotechnologist, Manufacturing for the following teams:

• Upstream Manufacturing Process
• Downstream Manufacturing Process
• Central Manufacturing Services (Media & Buffer, Logistics)

Knowledge, Skills & Competencies / Language

• Self-starter and independent worker who can operate and perform in cross functional teams.
• Possess strong analytical and critical thinking skills with the ability to problem solve and navigate through complexity and ambiguity.
• Able to work in fast paced and dynamic conditions with tight timelines.
• Good presentation and verbal communication skills who can adapt and tailor communication to various stakeholders.
• Excellent technical writing skills
• Team player

Qualifications / Requirement

• Degree in an Engineering or Science discipline
• Starting job grade of the role will be commensurate with the applicant’s highest education qualification and any other relevant experience.
• Candidates with prior internships or industrial attachments in biopharmaceutical and biotechnology organizations would be advantageous.

Any other requirements of the job

• Working hours during the initial Project Phase – work office hours (weekdays) with hybrid work locations from both Sanofi Tuas Site Office and home.
• Working hours beyond the Project Phase – 12 hours rotating shift (including day/night, and weekends) on site to support production activities.

** Submit your resume to : [email protected]

Project scope:

• Review and familiarization on Utilities and HVAC equipment (PID's, AFID's, lay outs and block diagrams).
• Execute and review SAT protocol/report
• Execute and review equipment Mechanical Completion and Commissioning.
• Support TS engineers on documentation (SOP's, WRA, Risk Assessment)
• Support TS engineers on creating and reviewing maintenance procedure and maintenance plan
• Support Process Equipment PQ

Routine Maintenance Scope:

• Support Engineers in the operation and maintenance of Utility (Clean and Black) and HVAC systems to provide the required level of availability.
• Ensure that systems’ performance comply with cGMP, EHS and GEP requirements.

Responsibilities:

1. Utilities (Clean and Black) and HVAC

• Ensure all Utilities and HVAC systems operate smoothly and delivers the required level of reliability, availability and quality.
• Ensure all routine maintenance are completed on schedule and Work Orders are managed responsibly via SAP.
• Ensure all ad-hoc & emergency breakdown repair and rectification are completed in the shortest possible time to restore systems to their operating conditions.
• Assist in root cause analysis and implement action plans to prevent breakdown recurrence.
• Evaluate and recommend appropriate spares and consumables and setup into the SAP system for the day-to-day operation & maintenance of the systems.
• Support related EHS and Sustainability (e.g. energy), Quality including Validation, Lean and CAPEX related matters

2. Management of Personnel

• Liaise and manage external service providers, vendors internal and external contractors to ensure all preventive, corrective maintenance and ad-hoc works are carried out safety, with good quality and in a timely manner.

3. Environment, Health and Safety (EHS)

• Comply with all local Singapore, and GSK and site EHS / Engineering standards and procedures at work.
• Manage mechanical equipment inspections to meet local regulatory requirement.
• Maintain and participate in implementation of EHS programmes.
• Maintain relevant EHS qualifications and competencies.

4. Quality

• Comply with all relevant global and site SOPs, GEP and GDP.
• Exercise proper good documentation and record system to ensure quality assurance operations.
• Ensure audit readiness.
• Ensure corrective action/preventive action (CAPA) is in place to eliminate quality related deviations.

5. Costs

• Participate in implementing cost-effective solutions in the upkeep and enhancement of plant asset life.
• Assist in monitoring and controlling expenditures within the allocated budget.

6. Continuous Improvement

• Continuously drive learnings and improvements across maintenance activities, energy and sustainability efforts and, other improvement initiatives for Utility and HVAC systems.

Knowledge, Skills & Experience:

• Min ITE in Engineering.
• Min 5 years of operation & maintenance experience in utilities or HVAC system in pharmaceutical industry
• Min 6 years of experience in maintenance activities
• Good experience and knowledge in operations and maintenance of Utilities and HVAC systems in a GMP environment.
• Good experience and knowledge in electrical and process instrumentation matters.
• Clean room testing, balancing and requalification.
• Experience with EHS procedures e.g. risk assessments, permit-to-work etc.
• Good interpersonal and communication skills.
• Understanding and experience in EHS and GMP requirements
• Able to operate computer / electronic and process control and monitoring systems.

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Purpose

• To maintain and repair all process and utility equipment to maximize plant availability at all times.
• Maintaining all equipment in the best operating condition and minimizing equipment breakdown within framework of Good Manufacturing Practice (GMP) & SEHS.

Key responsibilities

1. Operation

• Maintain, troubleshoot and repair all plant equipment to maximize plant availability and minimize disruption to production process.
• Perform routine preventive maintenance and ad hoc work request on all plant equipment.
• Support routine equipment re-qualification works.

2. Planning & Management

• Take personal responsibility for quality in all aspects of maintenance work that will have impact on product quality.
• Coordinate external resources for maintenance & repair/ replacement activities.
• Lead, supervise, develop, and motivate junior PM Technicians in troubleshooting and faults rectification of all plant equipment.
• Assist engineers to perform the routine work planning with operations counterpart to enable seamless work handover and minimize disruption to production schedule.

3. Safety

• Ensure all maintenance activities and carried out safety and good housekeeping is maintained.
• Maintain awareness in SEHS within maintenance section.
• Provide full support and accountability on compliance to SSOW system (eg. PTW, LOTO)

4. Quality

• Ensure that all maintenance and repair/replacement activities are carried out in compliance with engineering standards and procedures.
• Familiar with Local Standard Operating Procedure, Good Engineering Practice, GMP to carry out maintenance activities to high quality standards.

5. Costs

• Ensure cost effectiveness of all maintenance jobs.
• Carry out implementation activities for minor plant modifications and capital projects, in line with defined specification and budget.
• Contribution to Site VCP

6. Continuous Improvement

• Contribute to continuous improvement (CI projects, Orange Belts) by providing recommendation & initiatives and implement solution.

Skills, Knowledge & Experience

• Min ITE in Mechanical or Mechatronics Engineering
• Min 7 years of experience in maintenance, calibration, operation, or control instrument process
• Min 7 years of experience in pharmaceutical, chemical or life science industry
• Good understanding of standard engineering practices, GMP guide and relevant maintenance standards.
• Basic awareness of industrial standards.

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Purpose:

Project scope:

• Review and familiarization on Utilities and Process equipment's (PID's, lay outs and block diagrams).
• Execute and review SAT protocol/report
• Execute and review equipment Mechanical Completion and Commissioning.
• Support TS engineers on documentation (SOP's, WRA, Risk Assessment)
• Support TS engineers on creating and reviewing maintenance procedure and maintenance plan
• Support Process Equipment PQ

Routine Maintenance scope:

• To calibrate, maintain and repair all process and utility instrument to maximize plant availability at all times.
• Maintain all equipment in their best operating condition and minimize equipment breakdown within the framework of Good Manufacturing Practice (GMP) & SEHS.

Responsibilities

1. Operation

• Maintain, troubleshoot and repair all instrument & plant equipment to maximize plant availability and minimize disruption to production process.
• Perform routine calibration, preventive maintenance and ad hoc work request on all plant equipment.
• Support routine cleanroom testing & equipment re-qualification works.

2. Planning & Management

• Takes personal responsibility for quality in all aspects of maintenance work that will have impact on product quality.
• Coordinate external resources for maintenance & repair activities.
• Lead, supervise, develop, and motivate junior C&M Technicians in troubleshooting and faults rectification of all instrument & plant equipment.
• Assist Engineers to perform the routine work planning with operations counterpart to enable seamless work handover and minimize disruption to production schedule.

3. Safety

• Ensure all maintenance activities are carried out safely and good housekeeping is maintained.
• Maintain awareness in SEHS within Maintenance section.
• Provide full support and accountability on compliance to SSOW systems (eg. PTW, LOTO)

4. Quality

• Ensure that all maintenance and calibration activities are carried out in compliance with Engineering standards and procedures.
• Familiar with Local Standard Operating Procedures, Good Engineering Practice, Good Manufacturing Practice to carry out maintenance activities to high quality standards.

5. Costs

• Ensure cost effectiveness of all maintenance jobs.
• Carry out implementation activities for minor plant modifications and capital projects, in line with defined specifications and budget.
• Contribution to Site VCP

6. Continuous Improvement

• Contribute to continuous improvement (CI projects, Orange Belts) by providing recommendation & initiatives and implement solution.

Knowledge, Skills & Experience

• Min ITE in Electrical & Electronics Engineering, Instrumentation & Control Engineering or Mechatronic Engineering
• Min 7 years of experience in maintenance, calibration, operating, or control instrument process.
• Min 7 years of experience in pharmaceutical, chemical, life science industry.
• Good understanding of DCS and/or PLC as well as Standard Engineering Practice, GMP guide and relevant maintenance standards (added advantage).
• Basic awareness of industrial standards.
• Good oral and written communication skills.
• Customer oriented.
• Good interpersonal skills.
• Effective communication skills.
• SEHS awareness

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Responsibilities

• Lead the Mechanical Department and make sure everything runs smoothly and on time.
• Handle mechanical repairs and updates for commercial ships.
• Ensure production meets customer standards and expectations.
• Assign projects to supervisors.
• Make sure mechanical jobs are finished on schedule.
• Review and evaluate staff performance.
• Check progress of work on board or in the workshop.
• Plan department staffing needs.
• Identify and arrange training for staff.
• Oversee staff training and skill improvement in ship repair.
• Improve work quality in the department.
• Monitor and review safety and hazard reports.
• Implement safety plans for the department.
• Conduct safety audits for departmental practices and staff.
• Keep track of subcontractor working hours.

Requirements

• The ideal candidates should possess strong knowledge and experience in areas such as propulsion, shaft alignment, thrusters, and CPP. A degree or diploma in Mechanical Engineering is required, along with 4 to 8 years of experience in the shipyard or marine industry.

Benefits

• Free parking
• Professional development
• Car allowance

Working Hours

• Monday to Saturday
• 0800 to 1700hr (Mon – Fri)
• 0800 to 1200hr (Sat)

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

PRIMARY FUNCTION

• Responsible for allocating responsibilities and overseeing operations for assigned area and lines whilst monitoring productivity rates against established targets.
• Oversight of materials management and reviews the Standard Operating Procedures (SOPs) for materials management and cleaning activities.
• Propose and implement improvements to production workflows, equipment and systems to achieve production targets in a timely manner.
• Plan and manage production activities in a way which drives operational efficiency and excellence, and should possess underlying technical knowledge of equipment and systems within the facilities.
• Comply strictly with highly regulated standards.

MAJOR RESPONSIBILITIES

• Lead and drive collaborative efforts required to deliver quality and compliance performance for shift.
• Initiate, manage and make decisions which impact product quality.
• Model and promote behaviors that ensure delivery of high quality products for our customers while championing compliance with Abbott policies and procedures, meeting all local and statutory requirements.
• Accountable for shopfloor incident investigation and reporting for assigned area, coupled with timely escalation and implementation of corrective and preventive actions.
• Track, trend and continuously improve performance for overtime, OEE, production (unit/hour, pound/hour), MUV, Scrap and CIP for assigned areas.
• Promoted and drive continuous improvement programs using Operational Excellence tools and methodologies in processes/procedures in the shift for root cause analysis and resolution of issues.
• Drive OEE performance, understand the drivers, and develop and execute plans around improvement of line performance and quality metrics with support from direct manager.
• Actively plan and organize the day to day manufacturing operations and schedules.
• Anticipate and drive proper alignment and prioritization between manufacturing and support teams.
• Coach and direct individuals and the team to meet performance goals and objectives.
• Lead efforts required to deliver the EHS performance for the shift/line of accountability.
• Any other duties as assigned by supervisor.

REQUIREMENTS

• Diploma with minimum 5 years of experience in a regulated industry.
• Possess excellent oral and written communication.
• Possess coaching and development skill.
• Possess change management and problem-solving skills.
• Possess control knowledge
• Is a team-player
• Demonstrated leadership capabilities.
• Experience working on Continuous Improvement Projects
• Is analytical and systematic in investing programs and decisive in implementing optimal solutions in the course of his work.

*Kindly note this position is based in Tuas

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Job Summary: We are looking for a hardworking Production Operator who works well in a team. You’ll help us meet production and quality goals while following safety rules.

Key Responsibilities:

• Operate machines according to set procedures.
• Ensure products and processes meet quality standards.
• Suggest improvements and take action when needed.
• Perform other tasks as assigned by the supervisor.

Job Requirements:

• Strong focus on safety.
• Ability to work independently with little supervision.
• Good communication and teamwork skills.
• Can read and understand operation manuals.
• No experience needed; training will be provided.

Note:

• Preferably, applicants should live in the west region of Singapore.
• Open to Singapore Citizens and PR holders.

If you’re motivated and ready to learn, we’d love to hear from you!

Highlights

• Lunch provided
• In-house gym facility
• Short walking distance from Tuas Link MRT

Job Responsibilities

• Process ready goods
• Mix and process ingredients according to recipes
• Perform packing, labeling and storage duties according to SOPs.
• Clean and sanitize the production kitchen with proper cleaning agents.
• Assist other areas of production as required by the Production Supervisor / Manager.
• Perform other ad-hoc duties as assigned

Requirements

• Candidate must be physically fit as he/she is required to lift and carry heavy loads and work in a cold environment
• Candidates able to perform simple machinery maintenance and repairs have an added advantage
• Candidates possessing valid Food Hygiene Certificates have an added advantage
• Able to work in a team and provide assistance to colleagues where needed

Part-Time positions are available.

Mandatory Skills

Requirement:

Minimum 5 years of Production Support experience

Minimum Java development skills will be added advantage.

Key responsibilities

• Provide L2 support for banking applications and systems, including troubleshooting and resolving technical issues.
• Monitor system performance, detect anomalies, and ensure uptime and availability of services.
• Handle incident tickets, escalations, and ensure timely resolution of incidents in accordance with SLAs.
• Work closely with L1 support to ensure a seamless escalation process for complex issues.
• Collaborate with development teams to identify and resolve recurring issues or system bugs.
• Perform root cause analysis and provide recommendations for system improvements.
• Document technical issues, solutions, and best practices for future reference.

This position needs shift work, 8am to 8pm and 8pm to 8am.

Mandatory Skills

Requirement:

Minimum 5 years of Production Support experience

Minimum Java development skills will be added advantage.

Key responsibilities

• Provide L2 support for banking applications and systems, including troubleshooting and resolving technical issues.
• Monitor system performance, detect anomalies, and ensure uptime and availability of services.
• Handle incident tickets, escalations, and ensure timely resolution of incidents in accordance with SLAs.
• Work closely with L1 support to ensure a seamless escalation process for complex issues.
• Collaborate with development teams to identify and resolve recurring issues or system bugs.
• Perform root cause analysis and provide recommendations for system improvements.
• Document technical issues, solutions, and best practices for future reference.

This position needs shift work, 8am to 8pm and 8pm to 8am.

Metalcool is a leader in precision engineering, dedicated to delivering innovative solutions to our valued clients. We are seeking a skilled CNC Tool Manufacturing Technician to join our team. If you are a detail-oriented individual with expertise in CNC tool grinding and a commitment to quality, we want to hear from you!

Key Responsibilities:

As a CNC Tool Manufacturing Technician, you will play a crucial role in fabricating precision metal cutting tools. Your responsibilities will include:

• CNC Tool Grinding: Operate a 5-axes CNC tool grinding machine to fabricate metal cutting tools according to job sheet requirements.
• Blueprint Interpretation: Interpret basic drawings and specifications to determine dimensions, tolerances, sequence of operations, and setup requirements.
• Quality Control: Use measuring equipment, gauges, and fixtures for accurate inspection checks to ensure the quality of tools.
• Production Records: Maintain up-to-date production records and reports, accurately documenting work performed.
• Machine Maintenance: Perform daily cleaning and light maintenance tasks on machinery and equipment to ensure optimal performance.
• Communication: Update the Production Supervisor on job status and report any non-conformance issues raised during the fabrication process.
• Compliance: Adhere to ISO requirements and safety regulations to ensure a safe and compliant working environment.
• Equipment and Work Area Maintenance: Take responsibility for keeping equipment and the work area clean and perform basic preventative maintenance functions on equipment.

Qualifications:

To excel in this role, you should possess the following qualifications:

• Proven experience in operating a 5-axes CNC tool grinding machine.
• Proficiency in interpreting technical drawings and specifications.
• Knowledge of measuring equipment, gauges, and quality control processes.
• Strong attention to detail and commitment to producing high-quality tools.
• Ability to perform basic machinery maintenance and cleaning tasks.
• Effective communication skills and a team-oriented approach.

Why Join Metalcool?

• Competitive salary and benefits package.
• Opportunity to be part of a skilled team in a dynamic and growing industry.
• Commitment to safety, quality, and compliance with industry regulations.
• Supportive and inclusive work environment that encourages professional development and growth.

If you are a detail-oriented and skilled CNC Tool Manufacturing Technician with a passion for precision engineering, we invite you to submit your application. Please include your resume and a cover letter outlining your qualifications and why you believe you would excel in this role.

The Recruiter is responsible for Service Excellence throughout the recruitment cycle. They act as a brand ambassador for the client, focused on delivering exceptional talent while providing proactive and timely communication on the status of the search. They serve as subject matter expert in talent acquisition and provide consultative direction and industry expertise to hiring leader.    

• Work Location: Candidates must be based in Singapore
• Work Arrangement: Hybrid (2x or 3x in the client office)
• Work Schedule: Day shift/ APAC shift

Specific Requirements:

• Minimum of 5 years' experience in full-cycle recruiting, preferably within the engineering or advanced manufacturing sectors.
• The ideal candidate should possess strong stakeholder management skills and the ability to independently manage the entire hiring process with minimal supervision.  

Responsibilities:   

Finding Candidates:  

• Lead a detailed job scope meeting with the hiring leader to determine position specifications, providing relevant market data and recommendations on possible approaches to the search or candidate requirements.
• Review of candidates who have applied via the Applicant Tracking System (ATS).
• Evaluate candidate qualifications against position requirements and determine who to move forward in the recruitment process.
• Develop and manage recruitment marketing plans or sourcing plans to determine the most appropriate candidate sources that align to the search requirements.
• Source candidates via resume databases, search engine and networking sites using Boolean search language.
• Solicit and pursue referrals from business networks and/or internal referrals.
• Utilize Cielo’s proprietary software for mobile and email campaigning to talent communities.

Engaging Candidates:

• Use an appropriate mix of media to connect with talent communities (phone, email, social media, etc.).
• Articulate value proposition to candidates who are interested in the job opportunity.
• Prepare candidates for interviews, coaching them on logistical information, interview schedule, appropriate attire and overall expectations.
• Ensure candidates are provided with timely updates concerning the status of their applications and interviews.

Assessing Candidates:

• Draft and utilize phone interview templates appropriate to the job description.
• Use independent judgement to compare candidate phone interview notes and skills assessments with position requirements to determine if the candidate is a match for the role or a potential match for other open positions.
• Issue skills testing as needed and evaluate results (if process dictates).
• Review background and reference information (if process dictates).

Influencing the Hire:

• Keep candidates engaged throughout process, ensuring consistent communication on the status of the search.
• Partner with hiring leader to determine offer details, using market data and compensation guidelines to support recommendations.
• Articulate a job offer to candidate and drive for candidate acceptance, anticipating and negotiating counter-offers as appropriate.

Service Excellence:

• Strict adherence to all regulations (OFCCP and all other compliance standards set forth).
• Work to deliver a strong candidate slate, continuously building talent pipelines to ensure there are multiple qualified candidates in play at all times.
• Provide accurate and regular reporting of recruiting activities to the hiring leader and Cielo leadership to depict both metrics and efforts.
• Identify perceived difficulties with searches and research and recommend solutions to both internal and external stakeholders.
• Proactively and regularly communicate the status of each search to the hiring leader, providing a consultative approach with recommendations on how to move forward. 

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Perform assembly builds
• Ensure assembly builds are completed as scheduled and according to required specifications, drawings and work instruction.
• Work with engineers to conduct experiments
• Report manufacturing problems and assist in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.
• Other ad-hoc duties

Requirements:

• Min NITEC/ Higher Nitec or Diploma in Engineering or its equivalent
• Able to comprehend schematic / mechanical drawing
• Able to commit rotating shifts

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Xie Jiani (R1548854)

EnviroDynamics Solutions Pte Ltd

EA License No.: 12C6285