JOB SUMMARY

Snr Manufacturing Engineer (Medical) will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Engineer will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Strong Knowledge in Healthcare business with ISO 13485 & FDA regulatory would be added advantage.

• Knowledge of assembly drawings, as well as the ability to interpret part drawings and specifications, is essential.

• Report writing, perform DFM and able to communicate within internal and external stakeholders. Able to perform Assembly process for High Level Assembly (HLA). Create procedures for processes and train staffs accordingly.

• Strong understanding on PFMEA, Process Flow, Control Plan and Process risk Assessments.

• Communicate frequently with operations, technical, and quality representatives within area of support through the tier process.

• Provide leadership and commitment in supporting continuous improvements in quality, productivity, and delivery performance through the deployment of continuous improvement framework.

• Reviews all inputs from the Engineering Department, including ECOs, new product releases, configuration control policies, and marking requirements, while also participating in the Design for Manufacturability (DFM) process.

• Solid understanding on BOM, ECN process, PCN and shop floor management will good plus.

• Monitor and continuously enhance daily quality and efficiency performance in assigned areas. Familiarity with Lean tools, such as Cycle Time, TAKT Time, and LBR, is crucial for assessing waste reduction and overall improvement.

• Participate in new product development by collaborating with R&D, New Product Development, and Quality teams to offer Design for Manufacturability guidance on hardware. A solid understanding of mechanical design is essential.

• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply with all procedures within the company security policy.

REQUIREMENTS:

Candidate must possess at least a Diploma, Degree, Engineering (Mechatronic/Mechanical) or equivalent. At least 5 year(s) of working experience in the related field is required for this position.

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Photo / Track equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Responsibilities:

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Job Requirements:

• Degree in Mechanical Engineering
• Healthcare/Data Centre experience will be advantageous.
• Strong design experience in Fire Safety
• Minimum 5 years of relevant design experience
• Good understanding of Singapore Code of Practice and local authority submission process

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Location: Bugis (Hybrid)
Salary Range: $7,000 – $9,000 per month
Employment Type: Permanent
Travel: Frequent international travel (up to 1 month at a time)

Job Summary:

We are seeking an experienced Project Engineer to oversee the installation, operation, and maintenance of critical static equipment in industrial settings, including heat exchangers, high-pressure vessels, furnaces, and related systems. This is an exciting opportunity to join a dynamic team managing complex projects involving highly technical equipment across various industries, such as oil & gas, chemical processing, and power generation.

The ideal candidate will have a strong background in engineering design, project management, and static equipment handling, with the ability to travel internationally as needed to support project execution and ensure safety and performance standards are met.

Key Responsibilities:

• Manage and oversee the full lifecycle of static equipment projects, including heat exchangers, high-pressure vessels, and furnaces.
• Collaborate with internal teams and external stakeholders to ensure successful project execution and timely delivery.
• Provide technical expertise in the design, installation, commissioning, and maintenance of static equipment.
• Ensure all equipment complies with relevant safety, regulatory, and quality standards.
• Prepare and review project documentation, including technical drawings, specifications, and reports.
• Conduct site inspections and supervise contractors to ensure compliance with safety regulations and project specifications.
• Troubleshoot and resolve technical issues related to equipment, ensuring optimal performance and reliability.
• Coordinate with vendors, suppliers, and subcontractors to ensure equipment and materials are available for timely project execution.
• Regularly report on project progress, budgets, and timelines to senior management.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Chemical Engineering, or a related field.
• Experience: Minimum of 3-5 years of engineering experience working with static equipment (e.g., heat exchangers, high-pressure vessels, furnaces) in industrial settings.
• Project Management: Proven experience managing projects involving complex equipment, from initial design to installation and maintenance.
• Technical Skills: Strong understanding of engineering principles related to heat transfer, pressure systems, and high-temperature equipment.
• Travel: Willingness to travel internationally for extended periods (up to 1 month) as required by the project needs.
• Certifications: Professional certifications in Project Management (e.g., PMP) or relevant industry certifications are a plus.

Key Competencies:

• Analytical Thinking: Ability to assess and solve complex technical challenges quickly and effectively.
• Attention to Detail: Meticulous in reviewing design documents, equipment performance, and safety protocols.
• Collaboration: Able to work well with cross-functional teams, contractors, and clients to ensure project success.
• Problem Solving: Strong troubleshooting skills, especially in dealing with high-pressure or high-temperature equipment.
• Adaptability: Comfortable working in dynamic environments and adjusting to changing project requirements.

Benefits:

• Competitive salary and benefits package.
• Opportunities for career growth and development.
• Hybrid work model, with flexibility to work from home and the office.
• International travel opportunities for project execution and client support.

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Location: Bugis (Hybrid)
Salary Range: $7,000 – $9,000 per month
Employment Type: Permanent
Travel: Frequent international travel (up to 1 month at a time)

Job Summary:

We are seeking an experienced Project Engineer to oversee the installation, operation, and maintenance of critical static equipment in industrial settings, including heat exchangers, high-pressure vessels, furnaces, and related systems. This is an exciting opportunity to join a dynamic team managing complex projects involving highly technical equipment across various industries, such as oil & gas, chemical processing, and power generation.

The ideal candidate will have a strong background in engineering design, project management, and static equipment handling, with the ability to travel internationally as needed to support project execution and ensure safety and performance standards are met.

Key Responsibilities:

• Manage and oversee the full lifecycle of static equipment projects, including heat exchangers, high-pressure vessels, and furnaces.
• Collaborate with internal teams and external stakeholders to ensure successful project execution and timely delivery.
• Provide technical expertise in the design, installation, commissioning, and maintenance of static equipment.
• Ensure all equipment complies with relevant safety, regulatory, and quality standards.
• Prepare and review project documentation, including technical drawings, specifications, and reports.
• Conduct site inspections and supervise contractors to ensure compliance with safety regulations and project specifications.
• Troubleshoot and resolve technical issues related to equipment, ensuring optimal performance and reliability.
• Coordinate with vendors, suppliers, and subcontractors to ensure equipment and materials are available for timely project execution.
• Regularly report on project progress, budgets, and timelines to senior management.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Chemical Engineering, or a related field.
• Experience: Minimum of 3-5 years of engineering experience working with static equipment (e.g., heat exchangers, high-pressure vessels, furnaces) in industrial settings.
• Project Management: Proven experience managing projects involving complex equipment, from initial design to installation and maintenance.
• Technical Skills: Strong understanding of engineering principles related to heat transfer, pressure systems, and high-temperature equipment.
• Travel: Willingness to travel internationally for extended periods (up to 1 month) as required by the project needs.
• Certifications: Professional certifications in Project Management (e.g., PMP) or relevant industry certifications are a plus.

Key Competencies:

• Analytical Thinking: Ability to assess and solve complex technical challenges quickly and effectively.
• Attention to Detail: Meticulous in reviewing design documents, equipment performance, and safety protocols.
• Collaboration: Able to work well with cross-functional teams, contractors, and clients to ensure project success.
• Problem Solving: Strong troubleshooting skills, especially in dealing with high-pressure or high-temperature equipment.
• Adaptability: Comfortable working in dynamic environments and adjusting to changing project requirements.

Benefits:

• Competitive salary and benefits package.
• Opportunities for career growth and development.
• Hybrid work model, with flexibility to work from home and the office.
• International travel opportunities for project execution and client support.

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Job Scope:

• Create and develop mechanical designs for products or systems using CAD software
• Oversee and manage engineering projects from conception to completion
• Prepare detailed technical specifications, reports, and documentation
• Collaborate on the creation of prototypes and conduct testing for design evaluation
• Work closely with other engineering disciplines and manufacturing teams
• Identify design issues and develop innovative solutions
• Ensure designs comply with industry standards and regulations
• Provide guidance and mentorship to junior engineers and interns
• Engage with clients to understand needs and provide technical support

Requirements:

• Bachelor’s or master’s degree in mechanical engineering or a related field
• Minimum 4 years of relevant experience in semiconductor or automation equipment design; more experience considered for senior roles
• Proficient in Microsoft Office (Word, Excel, PowerPoint)
• Strong understanding of mechanical engineering principles and techniques
• Experience with mechanical design using SolidWorks preferred; familiarity with Autodesk/AutoCAD is a plus
• Solid knowledge of material properties required for senior positions
• Good communication, time management, problem-solving, and decision-making skills needed for senior roles
• Willingness to travel for overseas projects if necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

We are now seeking Field Service Engineers to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Performing on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation.
• Responding to requests for emergency repairs and services to troubleshoot equipment.
• Providing technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair, and maintenance at customer's sites, developing and further expand technical knowledge and expertise, currently recognized industry standards for engineering ability.
• Maintaining knowledge of applicable product line warranty and accomplish effective warranty administration.
• Planning, preparing and/or instructing both internal and external training programs as required, to impart and perpetuate field engineering and/or product knowledge in area of specialization.
• Providing leadership and technical direction to skilled labor performing work on customer sites.
• Maintaining strong safety mindset to assure the executed work reflects the technical requirements within NOV safety standards
• Preparing timely and accurate technical reports for customer records and a reference for future outages.

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand hydraulic schematics. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

Job Description:

· Designs jigs and fixtures as the case may be

· Design for fabrication/ Assembly/ Maintenance

· Research and Development of current or New Products

· Generates manufacturing drawings in accordance with applicable standards Interfaces with customers for technical discussion

· Research and analyse customer design proposals, specifications and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications.

· Specify system components to ensure conformance with engineering design and performance specifications

· Understand the design requirements and create the conceptual design/mechanism for the heavy trucks.

· Generate detailed engineering drawings of the design and prepare the Bill of materials.

· Responsible for the preparation of the manufacturing drawings of the detailed design.

· Conduct Finite Element analysis and kinematics & Dynamics analysis to improve the design performance.

· Engage with the manufacturing team during design stage and manufacturing stage to ensure the smooth transition from design to manufacturing.

Qualifications & Requirements:

· Candidate must possess Bachelor’s/Master’s degree in Mechanical Engineering and related courses.

· Minimum 1-2 years of experience in Mechanical design or Machine design is required for this position.

· In depth knowledge in CAD/CAE applications such as SOLIDWORKS, CREO, Inventor and Unigraphics etc.

· Ability to work in the fast paced environment and work independently.

· Strong mechanical engineering knowledge and fundamentals including design principles, machine elements, and fabrication methods.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities and Duties

· Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

· Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

· Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

· Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

· Initiate and carry out design review with customer base on project schedule

· Revise design and documents based on both internal and external review

· Create and update flow chart for the module or the entire machine

· Create part drawings and assembly drawings based on approved design and obtain approval from department manager

· Create Bill Of Materials (BOM) for the modules assigned based on design schedule given

· Create drawing release file and send out drawings for quotation

· Send out standard part list for quotation based on BOM

· Receive quotation and make price comparison spreadsheet

· Raise PR and get department manager approval and send to Purchase department for negotiation and ordering

· Promptly support any design issues discovered during fabrication and /or assembly stages

· Make necessary modifications needed, update design, drawings and get approval from department manager.

· Release revised drawings to supplier and internal assembly team

· Support machine assembly team as and when necessary, with set up and fine tuning of machines

· Carry out all the activities based on the project schedule given

· Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

· Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

Duties & Responsibilities

• Prepare the equipment list
• Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
• Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries
• Prepare the requisition and RFQ documents for vendor enquiry
• Prepare the technical clarification and technical bid evaluation of vendor proposal
• Review and check the drawings, designs specification, materials and equipment from vendor for conformity with project technical requirements
• To liaise effectively with vendor and inter-departments to resolve engineering technical issue
• To resolve and response to client comment.
• Prepare information drawing for interface design work whenever is necessary
• Prepare bill of material for cost estimation of bid project
• Provide engineering support for the equipment installation and commissioning activities at site
• Provide engineering support for maintenance works.
• To carry out any other duties as and when assigned by the immediate supervisor or principle engineer

Qualification & Experience Generally Required

• Bachelor Degree in Mechanical Engineering or its equivalent
• Min. 1 to 2 years engineering knowledge in mechanical disciplines in Oil & Gas and Petrochemical industries.
• Experienced in equipment engineering specifications and standards
• Familiar with industrial standards and local codes
• Strong communication skills and the ability to stay organised and multi-task
• Proficient in using MS Word, Excel, Autocad

Responsibilities:

• Design, build, and maintain CI/CD pipelines using various CI/CD platforms to streamline cloud deployments.
• Integrate automation solutions across applications to enhance operational efficiency.
• Ensure best practices and security are prioritized when developing CI/CD pipelines.
• Continuously improve operational workflows through task automation.
• Collaborate with subject matter experts to ensure automation solutions meet business requirements.
• Act as an innovative, hands-on DevOps engineer, focusing on both the technological and strategic aspects of the platform.

Requirements:

• Proven experience with Kubernetes and containerization technologies.
• Strong understanding about DevOps and DevSecOps terminology.
• Proficiency in automation tools such as Jenkins, GitLab Runner, AWS Lambda, AWS CodePipeline, and AWS CodeBuild.
• Hands-on experience with Infrastructure as Code (IaC) tools like Terraform and CloudFormation.
• Management configuration tool like Ansible, Puppet.
• Familiarity with scripting languages such as Python, Bash, and PowerShell.
• Experience working in multi-cloud environments, including AWS, Azure and GCP.
• Excellent communication and collaboration skills.
• Cloud certification (AWS, Azure or GCP) is highly desirable.

Senior Electrical Design and Commissioning Engineer (Marine Vessel Solution)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• S$ 4,000 - 6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

WhatsApp or Email your Resumé now for Interview Arrangements !

Whatsapp: +65 80231200

✉ [email protected]

Daniel Wong Reg No: R2095781

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Role: Process Engineer

Duration: 1 Year Contract

Working Hours: Monday – Friday; 8.30am – 5.30pm

Location: Woodlands

Salary: Up to $4k + 1 month completion bonus

Responsibilites:

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Diploma/Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

• Manage Standardized Work Chart (SWC), subcontractors, and site staff to ensure on-time project completion and update clients, consultants, subcontractors, and stakeholders on project progress.
• Prepare method statements, identify drawing discrepancies, submit material and sample submissions, and provide technical advice to resolve M&E-related issues
• Inspect work to ensure compliance with contract specifications, codes of practice, and safety regulations, while coordinating with SWC on structural and civil work matter
• Conduct inspections with RTO/RE based on specifications and approved drawings.

Requirements:

• Diploma/Degree in Electrical/Mechanical Engineering or equivalent
• At least 5 years of experience including involvement in two MRT/LTA underground project
• Proficient in leading CSD/SEM coordination, design interface, and construction coordination for transit projects, including chairing and leading coordination meetings
• Strong experience in BIM software and AutoCAD.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Maintain and develop all Linux and Windows infrastructure technology to upkeep the services.

Define and document best practices and support procedures on managing systems and services across all environments

Proactively monitor system performance and capacity planning, support disaster recovery planning, testing, and execution

Fault finding, analysis of logging information for reporting of performance exceptions

Manage, coordinate, and implement software upgrades, hot fixes on servers, workstations, and network hardware

Maintain and monitor all patch releases, design patch installation strategies, and maintain all systems according to NIST standardization.

Identify and rectify any complex OS issues, ensure high availability and resiliency of production systems

Handle the recovery and restoration of servers, provide technical assistance in system diagnostics, documentation, and errors.

Collaborate with COTS (External) Support Team for scheduled system upgrade, troubleshooting and rectification

Provide after-hours support for scheduled maintenance, infrastructure related emergencies as well as occasional weekend maintenance.

To Apply:

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. <https://go.persolkelly.com/job/apply/3539>

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

Position title : Vision Software Engineer

Location: Admirality Street
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000 (depends experience)

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Senior Electrical Engineer

[Oil & Gas | EPC Industry]

• Basic: $5,500 - $6,900 (Depends on EXP)
• Working Hours: 5 Days
• Location: South (Near MRT)

Interested applicants can sent your CV to email [email protected] or via whatsapp to +65 8064 9869 (TongHai)

https://wa.me/6580649869

About Our Client:
Our client is a distinguished leader in the Oil & Gas and Petrochemical sectors, renowned for its engineering prowess and dedication to delivering landmark projects. As a reputable EPC contractor, they push the boundaries of what’s possible in infrastructure solutions, emphasizing innovation, safety, and sustainability to bring complex visions to life. This organization is at the forefront of engineering excellence, setting industry benchmarks throughout the region.

Why Join This Team?
Joining our client means becoming part of an inspiring and forward-thinking team that values your expertise and fosters your growth. This role offers you the opportunity to shape major engineering projects, making impactful contributions that resonate across industries. With an environment built around cutting-edge technology, collaborative problem-solving, and continuous professional development, you’ll thrive in a workplace that rewards ambition, innovation, and dedication.

Job Scope

Engineering Design and Development:

• Define and establish the basis of design, estimation criteria, and design philosophies to guide detailed electrical engineering efforts.
• Conduct system studies and value engineering to develop cost-effective designs that meet client requirements.
• Prepare critical engineering documents such as Single Line Diagrams, Substation Layouts, and system diagrams for Fire Alarm and Communication Systems in compliance with client specifications.

Specifications and Technical Support:

• Develop specifications, data sheets, requisitions, and technical evaluations for major electrical equipment.
• Review vendor submissions to ensure alignment with project requirements and applicable standards.
• Participate in technical proposal preparation and estimation activities for new project bids.

Project Management and Coordination:

• Act as the Key Person (KP) for medium to large-scale projects exceeding 5,000 manhours, overseeing schedules, budgets, and quality metrics.
• Coordinate with multidisciplinary teams, vendors, and subcontractors to ensure seamless execution of project requirements.
• Lead site-based activities, including construction support, QA/QC responsibilities, and field engineering.

Mentorship and Training:

• Contribute to the department’s training programs as a mentor or trainer, fostering skill development within the team.

Site and Factory Engagement:

• Conduct site surveys and investigations to assess design feasibility for existing facilities.
• Participate in factory acceptance tests to ensure electrical equipment meets agreed specifications.

Support and Troubleshooting:

• Provide home office support for field operations, including expediting vendor deliveries and resolving technical conflicts during project execution.

Preferred Skills and Competencies:

• Proficiency in electrical design software such as ETAP and e-DPP, along with Microsoft Office, AutoCAD, and MicroStation.
• Comprehensive knowledge of local and international electrical codes and standards.
• Strong experience in designing electrical systems for oil, gas, and industrial facilities.
• Expertise in substation energization and related work.

Qualifications:

• Bachelor’s degree in Electrical Engineering.
• Over 15 years of experience in electrical engineering for oil, gas, and petrochemical plants, including:
• At least 5 years in frontend engineering and estimation.
• 5 or more years in field engineering.

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Kho Tong Hai | EA Reg No: R24122411

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

Job Description

• Industry/ Organization Type: Type: Automotive, Heavy Machinery and Aerospace Solutions
• Position Title: Design Engineer (Aero Engine Component Repair Design & Repair Development)
• Working Location: Shenton Way
• Working Hours: Monday – Friday, 9am – 6pm
• Salary Package: Up to $8,500
• Duration: Permanent

Key Responsibilities

• Lead the development of repair processes for Rolls-Royce Trent Engine Components.
• Spearhead and support the creation and development of necessary tooling and inspection requirements, including manufacturing routers and process instructions (e.g., data cards, recording forms, setup plans).
• Demonstrate First Article Inspection for assigned repair schemes according to AS9102, AS 130000, and Rolls-Royce SARRe Guidelines.
• Collaborate closely with Manufacturing Engineers and Customer Team Specialists to meet monthly repair development targets.
• Support Manufacturing Engineers in addressing technical and operational challenges related to Rolls-Royce, ensuring thorough follow-through until approval and shop operation handover.
• Assist in the preparation of Source Approval Validation packages and other necessary documentation for the industrialization and approval of Rolls-Royce-controlled repair schemes.
• Facilitate effective interactions with Engineering, Operations, Quality, Suppliers, and other support teams during repair industrialization, ensuring alignment with Safety, Quality, Delivery, and Productivity goals.
• Communicate effectively with vendors and internal functions to ensure timely and budget-compliant execution of repair development actions.
• Ensure all engineering designs and technical data are accurately documented, providing a strong technical/historical foundation for future reference and meeting customer/end-user needs.

APPLY NOW!!!

• Bachelor’s degree in Mechanical, Aeronautical, Material, or a related Engineering discipline.
• Minimum of 5 years in repair development or repair design
• Thorough understanding of Rolls-Royce repair schemes, engine manuals, special process manuals, and overhaul procedures.
• Proficient in Rolls-Royce component repair processes
• Knowledgeable in manufacturing and inspection tools and processes such as heat treating, thermal spraying, bead and shot peening, arc welding, wide gap brazing, and machining.
• Expertise in GD&T and tool/fixture design applications within repair settings.
• Specialized knowledge in the repair of Nozzle Guide Vanes and Stator Vanes would be advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70613 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114