We are looking for Site Engineer to be part of one of the teams in supporting and keeping MINDEF systems up and running smoothly 24/7. The Site Engineer has to be comfortable to be deployed to Sites such as Airbases, Naval Bases or Camps.

Responsibilities:

Perform routine Preventive Maintenance (PM) and Corrective Maintenance (CM) on Communication and Networking Systems

Perform documentation on maintenance tasks

Training is provided

Requirements

• Higher NITEC/ Diploma in Electronics/Information Technology/Telecommunication or related discipline
• Open to standby 24/7 after office hours when needed
• Possess Class 3 Driving License is advantageous

Roles & Responsibilities

Senior Project (Civil) Engineer

Civil projects - LTA, Road construction

1. Responsible for advanced Planning, designing, integrating, installation, rigging and lifting equipment, including management of contractors and vendors
2. Act on behalf Project Manager to play leadership role within project team, overseeing planning, execution, and completion of engineering projects.
3. Responsible for supervising and assessing the set-up of all project components, manage all aspects of an engineering project, prepare schedules, communicate with clients, project progress.
4. Resources (Manpower, Material & Machineries) planning, Relationship with clients and manage of contractors, subcontractors, and vendors

Job Responsibilities :

Project Management:

You will be responsible for managing the entire project lifecycle, from initial planning to project completion. This includes defining project objectives, developing project plans, allocating resources, and ensuring that the project is delivered on time and within budget, actively involve in site and progress coordination, Method statement, submission and approval, monitor licenses, permits and compliances.

Technical Expertise:

As a senior project engineer, you are expected to possess a strong technical background in your field of expertise. You will apply your knowledge and experience to solve complex engineering problems, provide technical guidance to the project team, and make critical decisions regarding design, implementation, and testing.

Stakeholder Communication:

As a senior project engineer, you will act as the primary point of contact for project stakeholders, including clients, contractors, vendors, and internal departments. You will communicate project updates, address concerns, manage expectations, and ensure effective collaboration between all parties involved.

Risk Management:

You will identify potential risks and develop strategies to mitigate them. This includes conducting risk assessments, implementing risk mitigation plans, and monitoring risks throughout the project. Additionally, you will ensure compliance with safety regulations and quality standards.

Budget and Cost Control:

You will be responsible for managing the project budget and controlling costs. This involves estimating project costs, tracking expenses, monitoring financial performance, and adjusting as necessary to ensure the project remains within the allocated budget.

Documentation and Reporting:

You will maintain accurate and detailed project documentation, including technical specifications, engineering drawings, progress reports, and other relevant records. You will also prepare regular status reports and presentations for project stakeholders, providing updates on project milestones, risks, and overall performance.

Continuous Improvement:

As a senior project engineer, you will actively seek opportunities for process improvement and optimization. You will analyse project outcomes, identify lessons learned, and implement best practices to enhance project efficiency, quality, and outcomes.

Project Engineer (Program Executive/NPI Engineer/ Process Engineer/Manufacturing Engineer/ Mold/Mould)

Permanent Position / MNC

Our client is a global advanced precision engineering & manufacturing solutions provider.

Summary of Role:

• Reporting to Program Manager. Provide project management by liaise with customer on new project requirements and perform process execution as well as coordinate with in-house team

Responsibilities:

• Studies design, customer requirements, specifications and performance standards for new projects.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains and track project schedule by monitoring project progress; coordinating activities among quality, engineering and tooling for mold trial related activities; resolving and troubleshooting process and problems.
• Validate mold trial and assembly outcome required, mold, measurement and process improvement.
• Follow up and provide timely update and submission on project schedule.
• Maintains product and company reputation by complying with relevant regulations.
• Able to create a document like Process Flow, Control Plan, pFMEA, WI and related procedures.
• Authority to initiate and arrange engineering risk build.

Requirements:

• Degree/Diploma in relevant discipline
• 3-5 years’ project management experience in a manufacturing environment
• Knowledge of Plastic Injection Molding, process, project management or related field preferred
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.
• Sound knowledge in SPC, FMEA, DFM, DOE

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Project Engineer (Program Executive/NPI Engineer/ Process Engineer/Manufacturing Engineer/ Mold/Mould)

Permanent Position / MNC

Our client is a global advanced precision engineering & manufacturing solutions provider.

Summary of Role:

• Reporting to Program Manager. Provide project management by liaise with customer on new project requirements and perform process execution as well as coordinate with in-house team

Responsibilities:

• Studies design, customer requirements, specifications and performance standards for new projects.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains and track project schedule by monitoring project progress; coordinating activities among quality, engineering and tooling for mold trial related activities; resolving and troubleshooting process and problems.
• Validate mold trial and assembly outcome required, mold, measurement and process improvement.
• Follow up and provide timely update and submission on project schedule.
• Maintains product and company reputation by complying with relevant regulations.
• Able to create a document like Process Flow, Control Plan, pFMEA, WI and related procedures.
• Authority to initiate and arrange engineering risk build.

Requirements:

• Degree/Diploma in relevant discipline
• 3-5 years’ project management experience in a manufacturing environment
• Knowledge of Plastic Injection Molding, process, project management or related field preferred
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.
• Sound knowledge in SPC, FMEA, DFM, DOE

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Job Responsibilities:

• Fresh Graduated are welcome
• Collaborate with the Sales Manager/ General Manager to contribute to the expansion of the company's business.
• Assume responsibility for effectively managing the assigned sales territory.
• Executing all relevant sales activities and achieving sales targets for the Singapore market.
• Prepare sales quotations, selections, and pricing for all products and parts to present to customers
• Handle all customer issues related to technical specifications, quality, and delivery. Provide feedback to the management and/or suppliers for immediate action when necessary.

Job Requirement:

• Higher NITEC/ Diploma/ Degree in Engineering background
• Possession of a Class 3 driving license with own transport will be an asset.
• Knowledge of Sales and Marketing in Pneumatic, Control, Robotic, PLC, and Servo Drive Systems will be an asset.

Benefits

• 5 days work week
• Attractive Basic Salary, Transport Allowance and Bonus

• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.
• Perform internal quality system audit.
• Optimize automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipment's are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues.
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings.
• Perform additional tasks given by the management.

Job Requirements:

• Diploma with 2-3 years of relevant experience.
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA.
• Require to perform shift work (Morning & Afternoon shift).

Interested applicants, please email your resume to [email protected]

E-Ployment Consultancy

EA License No: 09C0884

EAP Name/ Registered No: Ivan Mah/ R1108310

We are seeking a highly skilled Systems Engineer with cloud experience to design, implement, and maintain cloud infrastructure. The ideal candidate will have extensive experience with cloud platforms, systems architecture, networking, and security. You will play a critical role in ensuring the stability, scalability, and performance of our cloud and on-premises systems, while collaborating with various teams to support business goals.

Key Responsibilities:

• Cloud Infrastructure Design & Management: Design, deploy, and manage cloud environments (AWS, Azure, GCP, etc.), ensuring high availability, scalability, and performance.
• Systems Administration: Configure and maintain both cloud-based and on-premises systems, including servers, storage, and networking equipment.
• Automation & Optimization: Develop and manage automation scripts and tools (e.g., Ansible, Terraform, CloudFormation) to optimize system provisioning, configuration management, and maintenance tasks.
• Monitoring & Troubleshooting: Monitor system performance, ensure availability, and resolve any issues related to cloud and on-prem systems using tools such as CloudWatch, Prometheus, or Nagios.
• Security & Compliance: Implement and maintain security policies, including identity and access management (IAM), encryption, and vulnerability management, ensuring systems comply with industry standards and regulatory requirements.
• Backup & Recovery: Establish and manage backup and disaster recovery plans for cloud and on-prem systems.
• Collaboration & Documentation: Work closely with development, DevOps, and security teams to ensure smooth operation of applications and infrastructure, and maintain detailed system documentation.

Qualifications & Skills:

• 3+ years of experience in systems engineering or cloud infrastructure management.
• Proficiency with cloud platforms such as AWS, Azure, or Google Cloud Platform (GCP).
• Strong experience with automation tools (e.g., Ansible, Terraform, CloudFormation).
• Solid understanding of networking principles (TCP/IP, DNS, VPN, firewall configuration) and cloud networking (VPC, subnets, security groups).
• Familiarity with containerization technologies like Docker and Kubernetes.
• Knowledge of security best practices in cloud environments (e.g., IAM, encryption, security audits).
• Experience with CI/CD tools (Jenkins, GitLab, etc.) and version control (Git).
• Excellent troubleshooting and problem-solving skills.
• Strong communication and teamwork skills.

We are looking for an Asst Engineer / Engineer to be part of one or more teams in supporting and maintaining systems, keep them up and running smoothly 24/7. The Asst Engineer / Engineer should have broad technical skills and a working background in the System-Level Maintenance in the following disciplines, Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS.

Responsibilities:

• Involve in one or more teams in supporting and maintaining systems, keep them up and running smoothly
• Report to the Team Lead/Service Delivery Manager and in fulfilling SLA and KPI in accordance to maintenance contractual agreement.
• Assist Team Lead/Service Delivery Manager to deliver contract obligation within budget.
• Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.
• To perform routine Preventive Maintenance in accordance with the maintenance instructions / procedures.
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures, involving fault troubleshooting, diagnosis & replacement of equipment/module/component at sites and/or workshop.
• Liaison with procurement and equipment vendors.
• Perform 24/7 off-site standby for fault activation after office hours.
• Arrange and attend monthly meeting with customers.
• Provide engineering services such as engineering reports, supply support, configuration control and management and obsolescence management.
• Provide solutions to technical problem associate with RF communication systems.
• Required to travel to sites for work

Requirements

• Minimum of Diploma in Electronics/Mechatronics/Computer Engineering or equivalent
• Minimum of 2-3-year experience in a similar engineering-related capacity.
• Positive work ethics and team player.
• Takes ownership of responsibilities.
• Thrive in multi-disciplinary and cross-functional environments
• Able to work effectively in an indoor and outdoor environment.
• Preferably with some knowledge in Data Analytics (e.g. failure trending/patterns)
• Preferably with experience in System-Level Maintenance in the following disciplines is highly preferred (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Proficient in MS Office (Words, Power-point & Excel)
• Preferably with Class 3 Driving License

Job scope:

• Creating commercial & technical proposals
• Preparing & compiling bidding & quotation submissions to meet customers’ requirements
• Implementing project-related cost control activities by project specifications and procedures
• Meeting quotation & bidding deadline & reviewing customer contract, purchase orders agreement
• Understanding Power Electronics knowledge, electrical drawings and design
• knowledge of uninterruptible power supplies
• Diploma/Degree in any engineering related course

Basic salary up to $4500 + AWS + Variable bonus

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

• Location: Henderson Road
• Working Hour: 5 Days work Week 9AM – 6PM
• Salary: $4,500 - $5,000

Responsibilities:

• Be the primary technical contact for customers and in house repair jobs
• Assist customers in the repair and maintenance activities, but also with Providing spare parts and associate services
• Identify and translate customers’ requests ;
• Handle technical incidents and establish reports (troubleshooting, expertise, gathering useful information for analysis
• Guarantee, when necessary, the proper processing of offers : spare parts, onsite interventions and repairs.
• Coordinate onsite interventions actions and ensure an ongoing communication to the customer.
• Provide technical assistance to the Repairs Department and Field Service Technicians + Business Centers ;
• Occasionally promote to customers, technical training sessions and sales of spare parts and repairs ;
• Initiate, together with the appropriate stakeholders, the implementation of corrective actions that arose from customer complaints/claims.
• Be the technical interface within the departments, such as Engineering, Purchasing, Sales, Production, Global Service and customers
• Identify potential sales opportunities and forward the information to the sales teams.
• Identify the spare parts needed for Sales team to quote to customer
• Recommend spare parts needed for regular maintenance/during troubleshooting
• Acts as last form of technical checks to make sure the spares quoted is according to customer’s requirement
• curb warranty costs.
• Be responsible for the collection of outstanding payments for the Customer Service department
• Maintain proper records of interaction with customers within the CRM tool
• Control offers and order confirmation as per applicable procedures

Requirements:

• Have 3 to 5 years of experience in Mechanical Engineering. Marine engineering with mechanical knowledge will also be considered.
• Degree in Mechanical Engineering
• With hands on experience on compressors, turbines and pumps mechanically
• Be willing to travel if needed.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

About the Role:
We are seeking a dedicated and detail-oriented Project Engineer with a strong background in Mechanical Engineering to join our dynamic team. The successful candidate will be involved in the design, coordination, and implementation of projects within process piping plants, ensuring timely completion and adherence to industry standards.

Key Responsibilities:

• Lead the design, development, and execution of mechanical engineering projects related to process piping systems.
• Coordinate with internal teams, external contractors, and suppliers to ensure smooth project operations.
• Oversee project schedules, budgets, and resources to ensure timely delivery within set parameters.
• Conduct site visits to monitor progress, assess safety protocols, and ensure compliance with engineering standards.
• Prepare detailed technical reports, proposals, and documentation related to project specifications.
• Troubleshoot engineering challenges and propose effective solutions to enhance project efficiency.
• Ensure adherence to relevant safety, quality, and regulatory standards throughout the project lifecycle.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field.
• Proven working experience in process piping plants or similar industrial projects.
• Strong knowledge of mechanical systems, piping designs, and engineering principles.
• Proficient in AutoCAD, SolidWorks, or other relevant design software.
• Excellent project management and problem-solving skills.
• Strong communication skills, both written and verbal, with the ability to collaborate with cross-functional teams.
• Ability to work independently and handle multiple projects in a fast-paced environment.

Preferred Qualifications:

• Familiarity with Singapore's industry regulations and safety standards.
• Professional Engineer (PE) certification is an advantage.

The Opportunity:

Adecco is partnering with a European company that providing thermal treatment plant facility across the globe. Due to the expansion outlook in Asia region, the company is looking for regional technical experts to be based in Singapore.

The Job:

• Review and modify the P&ID. Diagnose process issues from P&ID and make necessary modification.
• Ensure all engineering documents and deliverables are accurate and meet the project schedule.
• Support FAT and Commissioning worldwide.
• Remote / physical troubleshooting (e.g. Boiler, pump, valve, hydraulic conveying system etc.)
• Perform 2D / 3D modelling.

The Talent:

• Minimum Degree in Mechanical Engineering, Chemical Engineering or relevant discipline
• More than 5 years' experience in FAT and SAT in O&G, water treatment and process industries
• Ability to interpret and diagnose process issues from P&ID and make necessary modification
• Process skid design (2D and 3D modelling) is a bonus. Training of Solidworks will be provided
• Willing to travel globally
• Willing to work independently and work from home permanently
• Ability to communicate and collaborate well with different nations

Next Step:

• Interested applicants, please send your resume to [email protected] with your current and expected salary.
• All shortlisted candidates will be contacted.

Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous

We are seeking a skilled and motivated Executive Engineer to join our team. In this role, you will be responsible for conceptualizing Mechanical and Electrical (M&E) designs and executing projects with detailed specifications. The ideal candidate will have a strong engineering background and relevant experience in the design and implementation of building services.

Key Responsibilities:

• Conceptualize and develop Mechanical and Electrical designs for various projects, ensuring compliance with industry standards and client requirements.
• Execute project plans by coordinating with cross-functional teams to ensure successful implementation of designs.
• Prepare and review detailed design documentation, including drawings, specifications, and calculations.
• Collaborate with clients, contractors, and team members to ensure project objectives are met within established timelines and budgets.
• Conduct site inspections and assessments to ensure adherence to design specifications during implementation.
• Provide technical support and guidance throughout the project lifecycle.

Qualifications:

• University degree in Mechanical or Electrical Engineering.
• Minimum of 4 years of relevant experience in the design and implementation of building services.
• Strong understanding of M&E design principles and best practices.
• Entry-level candidates will be considered for Engineer positions.

If you are keen to join our dynamic team, please submit your resume in either Word or PDF format to [email protected]. In your application, kindly include the following details:

• Current Salary
• Expected Salary
• Availability
• Reason for Leaving

We appreciate your interest in this opportunity. Please note that only shortlisted candidates will be contacted for further consideration.

By submitting your application or resume, you acknowledge and consent to the collection, use, retention, and disclosure of your personal information by us to potential employers through our services.

EA (23S1595/R23116355)

DESCRIPTION

• Bid preparation and project execution for floating offshore ammonia and hydrogen production projects, FAPSO & OSS.
• Assist in mechanical engineering support to ensure mechanical process equipment is designed, installed, operated and maintained to achieve maximum life of the equipment.
• Undertake FAPSO topside Mechanical engineering design to comply with the client’s requirements.
• Participate in vendor development for auxiliary distribution, telecom, high voltage equipment.

DUTIES AND RESPONSIBILITIES

• Support senior engineers and project managers in delivering sound engineering solutions.
• Assist in the design and development of mechanical systems, components, and equipment, ensuring adherence to project requirements, industry standards, and safety regulations.
• Collaborate with senior engineers to conduct technical analysis, testing, and troubleshooting of mechanical systems.
• Ensure that technical compliance with all design requirements.
• Use engineering software for modelling and analysis.
• Produce technical documents, reports and presentations detailing the findings of investigations under the guidance of Project Engineer or Engineering Manager.
• Coordinate with Engineering Contractor, Shipyard and Supplier Electrical discipline team to review the deliverables.
• Field engineering support during construction phase of the project.
• Commissioning and start-up support.
• Achieve safety standards as defined in project requirements
• Assist in preparation for bid submission to client, with compliant technical documentation.
• Assist in preparation for request for quotations, and evaluation of bids submitted by Suppliers.
• Attend technical meetings, and minutes down the meeting, if required.
• Keep track of relevant discipline tasks.
• Comply with environmental impact assessment and safety-related design requirements.
• Documentation in accordance with Company’s quality management system.
• Responsible for personal safety, safe working practices, and understand and follow HSE procedures.
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Bachelor or Master of Engineering Degree (Mechanical or related disciplines).
• 0 – 2 years’ experience. Knowledge or experience in maritime and offshore services will be advantageous.
• Aptitude and attitude to learn and experience marine engineering requirements, software tools, and other technical issues.
• Working knowledge of Microsoft Word and Excel are required.
• Previous use of AutoCAD or other 2D / 3D software will be advantageous.

PROFESSIONAL DEVELOPMENT

• Receive on-the-job training and mentorship from experienced engineers to develop your skills and knowledge.
• Opportunities for career advancement as you gain experience and demonstrate your abilities.
• Support for obtaining professional certifications.

Only Singaporeans & PRs need apply.

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description:

• Customises CMS database checksheets and allocation of checksheets based on latest engineering drawing revisions and punchlist updates for mechanical/ process/safety /HVAC discipline
• Prepares boundary drawings as per subsystem listing
• Prepares procedures/ work method statements and risk assessment for mechanical/ process/ safety/ HVAC commissioning activities
• Attends Factory Acceptance Test at vendors' premises, as required
• Leads a team of mechanical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides
• Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability
• Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities
• Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner
• Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities, etc
• Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc
• Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures
• Reviews completed commissioning documentation such as checksheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.
• Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

Requirements:

• Min. 5 years years of commissioning experience in the Oil & Gas/ Wind Farm industty
• Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc
• Good knowledge and experience in commissioning activities of oil and gas/ wind farm facilities
• Familiar with permit-to-work systems and lock-out tag-out procedures
• Good analytical, problem solving and planning skills.
• Familiar with Project Specifications, Technical and HSE Standards
• Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.
• Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Amiralty Yard)

60 Admiralty Road West, Singapore 759947

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Overview

Semiconductor devices are the necessity in our modern life. In Aurigin, we are a team of brilliant people designing and manufacturing automated systems in the Semiconductor industry. We are continuing to grow big and fast. We are inviting passionate Mechanical Design Engineers to join in this journey with us.

Responsibilities and Duties

• Design & develop high precision & high-speed machines using CAD tools.
• Test and evaluate design.
• Conduct experiments methodically, analyse data and interpret results.
• Identify, formulate and produce effective solutions to emerging problems.
• Evaluate final product’s overall performance, reliability and safety.

Requirements

• Bachelor’s/Master’s Degree in Mechanical/Mechatronics Engineering and preferably with design experience in similar equipment / machine / automation engineering environment.
• Good aptitude and strong interest in machine design.
• Robust understanding of core concepts including mechanics, kinematics, thermodynamics and materials science.
• Creative thinker with strong analytical and problem-solving skills.
• Accurate and strong attention to detail.
• Good communication skills.
• Applicants with demonstrated relevant experience will be consider for senior appointments.

Job Description

1. Prepare mechanical design, details, and assembly drawings by using Solid Work software

2. Proficiency in Solid Work is required

3. Responsible for conceptual design, new product design, and improvement to existing product

4. Experience with Engineering calculations

5. Communicate and coordinate with suppliers, customers, and internal departments, to meet objectives and requirements, plan, monitor, and control the project, including carrying out the implementation of the project

6. Prepare cost estimation, budget, control report, and other technical documentation when required

7. Hands-on and assist in the factory manufacturing, installation, buy-off, supporting of projects internally and at customer sites, and other technical activities when required

8. Assist in monitoring projects, prepare reports on project progress, and ensure project schedule is being met

9. Fulfil any other duties as and when assigned by the management

Requirements:

1. Candidate must possess at least a Bachelor's or Diploma Degree in Engineering (Mechanical or equivalent) with a minimum of 2 to 3 years of working experience and above. ITE candidates with more than 10 years of experience will be considered.

2. Working experience in the design and development of optic and handler applications or a similar background is preferred.

3. Able to work independently, and as a team player, commitment, and a sense of ownership are necessary

4. Good interpersonal, management, and decision-making skills

5. Able to travel with short notice and station overseas when required

6. Excellent oral and written communication skills in English

A 5-day work week is required in the Sembawang area. Candidates who are able to start work immediately or on short notice are preferred. Only shortlisted candidates will be notified.

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

· Planning, coordination, and execution of substation automation projects.

· Design, costing and integration of substation automation systems according to project requirements.

· Installation, testing and troubleshooting of substation automation systems at site.

· Preparation of project documents and drawings.

Requirements:

· Diploma in Electrical Engineering/Computer Engineering

· Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Position: Service Engineer (Crane/Heavy Equipment Industry)
• Location: Tuas (company transport provided)
• Working hours: Monday to Friday (8.30am - 4.30pm)
• Salary (commensurate with experience): Up to $4,000 + OT Payable + AWS + Performance Bonus + 14 Days Annual Leave + Transport Allowance + Meal Allowance
• Duration: Permanent
• Industry: Equipment & parts distributor (MNC)

Main Responsibilities:

• Product delivery training to distributors and customers
• Provide diagnosis guidance and analyzing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue
• Furnish warranty claims and quality report to drive quality improvement on our products
• Any other ad-hoc duties assigned

Requirements:

• Minimum Diploma in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess a valid Class 3 Driving License
• Will involve travelling to other countries within Asia, entitled to travelling allowance

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.