As a NVM Quality Reliability Assurance Engineer, in the Global quality group at Micron Semiconductor Asia, you will be responsible for conducting electrical failure analysis from products undergoing qualification and reliability testing for Micron’s leading edge next generation non-volatile memory devices, in particular for Managed NAND products. You will perform electrical failure analysis and data analysis to ensure Micron’s devices meet all outgoing quality and reliability requirements. In particular, your role will involve failure analysis of units from System Quality and Reliability tests.

Responsibilities and Tasks:

• Perform Failure Analysis (FA) of rejects from Quality and Reliability Trials
• Perform initial FA, including debugging data capture and analysis
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Perform detailed fault isolation once failure has been confirmed
• Collaborate with cross-functional resources and support groups to identify root cause and corrective action
• Summarize findings and submit for Component / Firmware / Module FA
• Provide FA Diagnostic Reports to Internal Customers
• Summarize analysis at electrical and physical level at consolidated database like JIRA
• Manage Communication of FA Results to Internal Teams

Requirements:

• Degree in Electrical / Electronics Engineering or related field
• Good problem solving and analytical skills
• Good organization and communication skills
• Experience/Knowledge in working with Non-Volatile Memory System products such as Solid State Drives and/or Managed NAND products (UFS or eMMC) would be an advantage
• Fresh graduates are welcomed to apply

Working location:

990 Bendemeer Road, Singapore 339942

Responsibilities:

• Install, test, commission, and conduct preventive and corrective maintenance (PM & CM) on healthcare equipment/systems.

• Address and resolve recurring issues promptly to ensure consistent customer satisfaction.

• Plan and schedule PM or CM tasks efficiently.

• Provide post-sales support as needed.

• Coordinate with manufacturers, vendors, contractors, and clients for project management.

• Assist the project team in executing projects smoothly.

• Respond promptly to service calls.

• Collaborate with team members to gather feedback and identify prospects.

• Undertake any additional tasks as assigned.

Requirements:

• NITEC/Diploma in Electrical/Electronic/Biomedical Engineering or equivalent.

• Proficient in using software-assisted technical service diagnostic and testing equipment.

• Minimum of 2-3 years' relevant experience preferred; fresh graduates with a keen learning attitude are encouraged to apply.

• Strong interpersonal skills and customer service orientation.

• Good command of English and familiarity with Microsoft Office and IT tools.

• Self-motivated, diligent, and reliable.

• Possession of a valid driving license is advantageous.

• Able to work independently as well as part of a team.

• Fluent in both spoken and written English.

1. Education – minimum Diploma or Degree or IT certifications
2. Experience – minimum 3 years of IT experience, preferably have project implementation and support exposure in SI environment
3. Main job scope - project implementations/migrations/maintenance support on various products of focus such as:
   • Wireless network, switches and routers – Cisco, or HPE/Aruba/Ruckus switches implementations with multiple VLANs and routing, wireless implementation with Cisco, Aruba or Ruckus
   • Other products - Bluecoat Proxy, RSA server, MS Radius Server, Aruba Clearpass, Aruba Airwave, Nessus, Solarwinds, PRTG
   • Firewalls - Cisco, Checkpoint, Watchguard, Fortigate, Palo Alto, Juniper with IPSEC/site to site VPN, UTM features such as antispam/antivirus, IPS/IDS, content filtering
   • Basic Windows Server implementation with AD, DHCP and DNS
   • MS Azure network configuration

Send your Cv to [email protected]

Responsibilities:

• Develop process knowledge based on customer requirements to demonstrate the feasibility of the application. This often requires rapid prototyping and/or product demonstration for clients.
• Perform optics and laser experiments
• Assess materials combinations and joining methods for best interconnect reliability
• Development of new processes for interconnects from concept to deployment
• Conduct research on semiconductor market trends and market requirement
• Provide pre and post-sales technical support; working with the customer from prior to the sale, through delivery and installation.
• Obtain practical hands-on experience with existing equipment. Gain a fundamental understanding of equipment functionality and usage.
• Develop test plans and execute experiments to analyze and characterize bonding interconnect mechanisms.
• Contribute to product development projects. Perform work in cooperation with marketing and other engineering functions (software, mechanical, systems)
• Provide technical expertise through technical presentation, sales presentations, product demonstrations, installation and maintenance of company products.
• Assist the sales staff in assessing potential application of company products to meet customer needs and prepare detailed product specifications for the development and implementation of customer applications/solutions.
• Conduct new product capability assessment and validation.
• Provide follow-up support to company sales staff and customer personnel by disseminating technical information on specific applications.
• Enhance equipment capability through process-driven knowledge development.
• Develop and create reference documents for process-of-record standards
• Prepare technical reports as required. Present concepts, data, and recommendations to management or to customers and maintains reports, files, and records that are required by company policy and standard professional practices.

Requirements:

• Bachelors Degree / Masters Degree strongly preferred / PhD Degree welcome, in Material Science, Physics, , Mechanical or Electrical engineering
• Knowledge in laser theory and operations is a plus.
• Hands-on experience with laser welding is a plus.
• Experience in Manufacturing/ packaging/Design/Automation experience is a plus
• 2-5 years of experience in engineering or research development
• Minimum 2 years of CAD experience (NX experience is a plus)
• Sound engineering judgment
• Strong analytical and problem-solving skills.
• Experience with statistical tools and statistical software (Excel, Minitab, etc) is a plus
• Recent graduates with strong portfolio are welcome
• In-depth knowledge of electro-mechanical system is a plus
• Experience with Design of Experiments (DOE) is a plus
• Experience with Ultrasonic bonding is a plus
• Good written and verbal communication, interpretation, and interpersonal skills.
• Able to work independently as well as within a team.
• Adopts a Growth Mindset approach when facing challenges.
• Good verbal and written communication skills.
• May be required to travel locally/internationally to provide on-site technical support to customers, typically up to 10-25% annually.

Schneider Electric is a Fortune Global 500 company and leading the digital transformation of energy management and automation. We make it possible for IoT-enabled solutions to seamlessly connect, collect, analyze, and act on data in real-time delivering enhanced safety, efficiency, reliability, and sustainability.

We are looking for looking for “Senior Firmware Engineer” for developing and maintaining our existing Programmable Logic Controllers. You will be involved in the design and development of new features in addition to addressing bug fixes. You will be required to consistently meet project deliverables with high quality and work in a diverse team environment across the globe.

Essential Functions

• Contributes to or develops architectural designs and independently develops complex system designs that meet the requirements.
• Considers tradeoffs between requirements, speed, cost and reliability in the choice of a design approach.
• Collaborates closely with business and relevant engineering disciplines to address medium to long term constraints.
• Leads or participates in reviews of architecture, documents, designs, code, test cases and user documentation.
• Determines the origin and root cause of complicated anomalies that may affect multiple subsystems or require architectural enhancements.
• Applies secure code design and development best practices to the product.
• Takes the lead on identifying and recommending capability improvements in software development practices and development tools.
• Thinks outside the box and is willing to research and explore new avenues to overcome obstacles by utilizing the latest technologies and standards. May act as a go-to person for a technology, software methodology or other area of expertise.
• Able to learn and understand complex control system concepts.

Requirements

• Bachelor or master’s degree in electrical/Computer/Computer Science Engineering
• 5-8 years of experience in Embedded Software development
• Proven experience with C/C++ with strong skills in Data structures, multi-cores
• Experience in developing applications on RTOS such as VxWorks
• Hands-on experience with communication protocols (Ethernet IP, OPC/UA etc.)
• Experienced in solving complex system problems with systematic troubleshooting skills.
• Experience with PLC programming languages like Ladder Logic, Structured Text is an added advantage.
• Possess good communication and interpersonal skills to collaborate with cross-functional teams in multi-cultural environment.
• Direct experience collaborating with local and global technical development teams.

What's in it for you?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Blue sky Friday
• Worldwide Employee Stock Ownership
• On-site gym

…and more!

Job Scope:

• Benchmarking and Process Development: Responsible for new equipment benchmarking, process development, technical strategies, and technical roadmaps at the Central Backend Manufacturing & Technology (BEM&T) function.
• Technical Expertise: Provide technical expertise and recommend solutions for the development and design of equipment to maximize overall equipment effectiveness.
• Technical Specifications: Create equipment technical specifications and strip drawings.
• Standardization: Harmonize and standardize manufacturing equipment and solutions across all BEM&T sites worldwide.
• Coordination and Communication: Maintain a strong coordination and communication network with both local and overseas back-end manufacturing sites.
• Supplier Collaboration: Partner with suppliers and subcontractors on new equipment projects, including commissioning and installation.

Job Requirements:

• Educational Background: Relevant bachelor’s degree in Mechanical or Electronic Engineering, or an equivalent field.
• Experience: More than 3 years of experience in Mold, Oven, Safety, or AXI Equipment Engineering.
• Technical Knowledge: Good knowledge and expertise in mold equipment, mold simulation, and mold chase design rules.
• Procurement and Safety: Ability to create centralized technical equipment procurement and safety specifications.
• Strip Drawing: Ability to create molded ball attach strip drawing substrates and leadframe drawings for "mold + trim & form."
• Leadership: Ability to lead technical and equipment communication.
• Communication Skills: Able to express ideas clearly, both orally and in writing.
• Software Proficiency: Proficient in Microsoft PowerPoint, Excel, Word, and AutoCAD applications.
• Problem-Solving: Solid experience in problem-solving techniques and methodologies.
• Personal Attributes: Requires creativity and assertiveness.

Responsibilities:

· Provide technical support services remotely or onsite as per service level agreement including

Break-fix.

· Emergency support.

· Software upgrades.

· 24 x 7 rotational on-call standby duty.

· Engage customers and vendors to deliver a fit-for-purpose and future-proof solution design that meet their business objectives, adhering to project delivery framework and vendors' product lifecycle.

· Develop and implement infrastructure projects adhering to project scope of work, timeline, budget, with quality.

· Develop concise project documentation such as High-Level Design, Low-Level Design,

· Migration/Implementation MoP, User Acceptance Test, User Guide documents, System Documentation.

· Develop test cases and conduct hardware & software regression tests on new software/hardware prior to deployment or proof of concept of solutions.

· Perform configuration change for network enhancement and validation of new service/feature.

· Prepare reports and documentations outlining findings and solutions when required.

· Continually research new technologies and educational opportunities.

Requirements:

· Tertiary education in Computer Networks, Information Technology or Cybersecurity.

· Possess Technical Certifications in any of the following domains will be an added advantage. (Data Center / Routing & Switching / Security / Service Provider / Wireless)

· 3-5 Years’ experience in filed or service engineering, specifically on network, wireless, and network security projects.

· Possess an analytical mind with strong problem-solving skills and the ability to work independently and cope with pressure.

· Able to work flexi hours (even after office hours when required).

· Ability to quickly learn new or unfamiliar technology and products using documentation and internet resources

· Preferably with knowledge and hands on experience in any of the following areas:

o LAN Switching technologies such as VLANs, VXLANs, STP/RSTP.

o WAN and Routing technologies such as OSFP, IS-IS, BGP, MPLS.

o Network Authentication technologies such as 802.1x Radius, Active Directory, Posture, Profiling.

o WIFI technologies such as WLC, 802.11ac, PEAL, TLS. Experience with heat map coverage mapping will be an added advantage.

o Network Monitoring / Performance measurement such as Solarwinds, MRTG, PRTG.

o Packet Optical Network solutions such as IPoDWDM.

o Network security solutions such as NG-Firewalls, VPN solutions, UTM, endpoint security, IPS/IDS, token-based authentication solution, antivirus gateway, data encryption, DDoS protection system and PIN verification systems.

o Appliance based Server/firewall/WAN load balancers such as Proxy Server, WAN Optimization and Applications Acceleration systems.

o DNS, DHCP and IPAM (DDI) solutions.

o System Experience includes Linux/Unix, Microsoft Active Directory, DNS, DHCP and MS Server.

o Virtualization solutions such as VMWare, Hyper-V.

o Cloud Experience with AWS, Azure.

Nera is committed to offering our employees a safe, engaging and fulfilling workplace, with considerable opportunities for advancement.

Job Scope:

• Benchmarking and Process Development: Responsible for new equipment benchmarking, process development, technical strategies, and technical roadmaps at the Central Backend Manufacturing & Technology (BEM&T) function.
• Technical Expertise: Provide technical expertise and recommend solutions for the development and design of equipment to maximize overall equipment effectiveness.
• Standardization: Harmonize and standardize manufacturing equipment and solutions across all BEM&T sites worldwide.
• Coordination and Communication: Maintain a strong coordination and communication network with both local and overseas back-end manufacturing sites.
• Supplier Collaboration: Partner with suppliers and subcontractors on new equipment projects, including commissioning and installation.

Job Requirements:

• Educational Background: Relevant bachelor’s degree in Mechanical or Electronic Engineering, or an equivalent field.
• Experience: More than 3 years of experience in Mold, Oven, Safety, or AXI Equipment Engineering.
• Technical Knowledge: Good knowledge and expertise in mold equipment, mold simulation, and mold chase design rules.
• Procurement and Safety: Ability to create centralized technical equipment procurement and safety specifications.
• Communication Skills: Able to express ideas clearly, both orally and in writing.
• Software Proficiency: Proficient in Microsoft PowerPoint, Excel, Word, and AutoCAD applications.
• Problem-Solving: Solid experience in problem-solving techniques and methodologies.
• Personal Attributes: Requires creativity and assertiveness.

Position Summary

The Operations and Facilities Coordinator will assist the M&E Facility Executive in coordinating operations and maintenance activities, including retrofitting works in the office and GMP facility, to ensure clean, safe, and functional environments. You may be tasked with performing risk assessments to ensure compliance with Workplace Safety and Health (WSH) practices. You will communicate with relevant personnel in response to requests and feedback from facility users. Additionally, you will liaise with third-party service providers to ensure that repair and maintenance works are carried out in a timely manner and comply with quality and safety standards.

You should be a good communicator, people-oriented, and service-focused. You will work at designated properties during business hours but may be required to be on-call after office hours in case of emergencies. You will assist with maintenance activities associated with plant turnaround and may specialize in electrical, rotating, static, or instrumentation and control-related maintenance work. This position adheres to safe system of work (SSoW) procedures and applies risk control measures to ensure that work activities are carried out safely and in compliance with relevant regulations.

Additionally, about 30% of your role will involve supporting the Supply Chain, particularly in warehouse operations, to enhance productivity and efficiency within the team.

Essential Job Functions

• Facilities Support

1. Possess at least a Diploma in Engineering or equivalent.
2. More than 3 years’ experience in a Bio-Lifesciences environment. Candidates with MNC or GMP experience will have an advantage.
3. Working understanding of Lab/GMP operations, Quality Assurance, Quality Control, Supply Chain, and related functions.
4. Applicants with knowledge in vendor management will have an advantage.
5. Position and title will be accorded per work or industry experience of the candidate.
6. Self-starter, self-motivated - effective as an individual contributor and team player with other functions.
7. Ability to communicate technical knowledge clearly and understandably.
8. Able to interpret control schematics and perform troubleshooting and hands-on minor repairs/maintenance.
9. Hands-on experience with facility and utility systems (process gas/purified water/ACMV/HVAC) and laboratory equipment/instruments will be preferred.
10. Candidate who is bilingual in spoken English and Chinese will have an advantage for role involving technical knowledge transfer and collaboration between China and Singapore.

• Warehouse support

1. Inventory Management: Oversee inventory control by tracking stock levels, ensuring accurate records, and managing stock replenishment to meet operational demands.
2. Order Processing: Coordinate the receipt, storage, and dispatch of goods, ensuring timely and accurate order fulfillment.
3. Warehouse Equipment Maintenance: Ensure the proper functioning and maintenance of warehouse equipment, such as forklifts, conveyors, and air conditioning units.
4. Compliance and Safety: Ensure compliance with safety regulations, including conducting regular safety inspections and adhering to cGMP and workplace safety standards.
5. Supplier Coordination: Work with suppliers to ensure timely delivery of goods and services, addressing any discrepancies or delays in the supply chain.
6. Documentation and Reporting: Maintain accurate records of warehouse activities, including deliveries, stock levels, and equipment maintenance, while preparing necessary reports for management

Requirements

• Education: Possess at least a Diploma in Engineering or equivalent.
• Experience: More than 3 years of experience in a Bio-Lifesciences environment; candidates with MNC or GMP experience will have an advantage.
• Operational Knowledge: Working understanding of Lab/GMP operations, Quality Assurance, Quality Control, Supply Chain, and related functions.
• Vendor Management: Knowledge in vendor management will be considered an advantage.
• Position Title: Position and title will be accorded based on the candidate’s work or industry experience.
• Personal Attributes: Self-starter and self-motivated; effective as both an individual contributor and team player across functions.
• Communication Skills: Ability to communicate technical knowledge clearly and understandably.
• Technical Expertise: Hands-on experience with facility and utility systems (process gas, purified water, ACMV, HVAC) and laboratory equipment/instruments is preferred.
• Warehouse Operations: Proven experience in handling inventory management, stock control, and order processing within a warehouse or logistics environment.
• Equipment Handling Skills: Experience with warehouse equipment such as forklifts, conveyors, and inventory tracking systems, along with basic equipment maintenance knowledge.

Working Location

Tai Seng (near Tai Seng MRT station)

Working Days and Hours

Mon-Fri; 9am to 6pm

Benefits:

· Annual Leave: 15 days

· Medical Insurance Coverage

· Transport and Mobile Allowance

Job Description Responsibilities:

• Ensure the projects are fully attended and completed to meet agreed deadlines
• Supervising the project progress to ensure that issues of the project are identified and solved
• Attend meetings, liaise and manage clients to complete project deliverables
• Experience managing a team on site at an event, ability to troubleshoot on site and react, provide solutions to the internal team, external suppliers and clients alike.
• Working with Management to adapt strategy with objectives continuously improving on SOPs where necessary.

Skill Requirements

• Strong project management skills
• Observant and paying great attention to detail
• Good interpersonal skills and effective communicator
• Problem solver and creative

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Bilingual with good communication skills

• Render all M&E Engineering support to the M&E Manager/Project Manager/Planning Manager for the successful execution of the project.
• Liaise and coordinate with clients, consultants, consultant representative (RE/RTO), relevant authorities and sub-contractors on M&E issues and challenges.
• Coordinate with all M&E subcontractors, as well as project team structural and architectural colleagues to resolve all drawings, site discrepancy or technical issues.
• Attend all project meetings and progress meetings relating to meeting master program schedule.
• Ensure good M&E drawing management and the control of M&E documentation/filing on site.
• Ensure timely production and submission of M&E shop drawings, materials submission and method statements. All M&E shop drawings, materials and method statement are to be approved before use.
• Ensure all M&E site activities are well-planned, well-coordinated and on time.
• Oversee and guide all M&E staff/Supervisors/sub-contractors, ensuring work is carried out in accordance with the approved shop drawings, materials and method statements.
• Prepare accurate and comprehensive M&E progress report when required.
• Arrange for all M&E T&C works.
• Work with Consultants to come out with proper site inspection schedule to be carried out by the relevant government authorities.
• Work closely with EHS Department to ensure strict compliance of safety regulations.

Requirements:

• Degree in Mechanical/Electrical Engineering or related disciplines.
• Minimum 3 years’ experience for Main Contractor in project management and/ or site coordination works for building or civil projects.
• A team player and able to communicate well with all level.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The project is an oral language proficiency evaluation on primary students. Specifically, this role involves the design and development of gamification features, which leverage on data provided by AI tools, to help encourage primary students to practice and improve in their mother tongue learning.

We are looking for a research engineer with a passion for developing and maintaining highly interactive gamified cross-platform apps. The primary responsibility of this role will be to design and develop the gamification features of this application to encourage desirable user behaviors and encourage more regular language learning activities for users.

Knowledge of gamification would be advantageous but support in training in gamification will be provided.

Key Responsibilities

• Participate in and manage the research project with Principle Investigator (PI) and Co-PI and the research team members to ensure all project deliverables are met.
• Co-design gamification elements for the language learning app.
• Develop gamification features for the gamification app.
• Support in research and writeups related to the use of the gamification app.
• 
  

Job Requirements

• Bachelor Degree in a computing-related domain, e.g., Computer Science, Computer Engineering, Software Engineering, etc. Other applicants with equivalent industry experience are welcome to apply too.
• Experience developing interactive web apps using various web programming technologies like javascript, python, java, C#, HTML and/or CSS.
• Good programming foundation in data structures and algorithms.
• Knowledge of Agile development methodologies (e.g., Scrum and/or TDD).
• Applicants with equivalent industry experience may be considered.

Key Competencies

• Experience in cross-platform web/app development frameworks is a plus (e.g., React Native or Flutter).
• Experience in backend frameworks is a plus (e.g., node JS or djano).
• Able to build and maintain strong working relationships with people within and external to the university.
• Flexibility to work across functions/teams as part of a team in a dynamic environment.
• Self-directed learner who believes in continuous learning and development.
• Proficient in technical writing and presentation.
• Possess strong analytical and critical thinking skills.
• Show strong initiative and take ownership of work.
• Possess good project management skills.
• 
  

As a Senior Business Analyst in the Assembly and Test Manufacturing Central Team (AT MCT) Control Systems Management team at Micron, you are responsible for identifying new system needs, investigating possible solutions and implementing system solutions. You will be on the forefront of Micron manufacturing systems innovation and discovery. Your responsibilities include, but are not limited to:

• Assist IT and procurement in decisions related to external solution providers
• Assist IT and manufacturing with the identification of system requirements to meet business and process needs.
• Help shepherd system enhancement/replacement projects through conception, requirements gathering, development, acceptance testing and implementation.
• Perform analysis with partners to identify issues and create a transformation plan
• Collaborate to lead business activities related to improvement opportunities or large initiatives, including leading current state process discovery sessions, gathering requirements, modeling processes, analyzing impacts, develop validation methods, and supporting the implementation of improvements
• Deliver innovative solutions, internally or externally sourced, that increase business value by embracing standardization, simplicity, as well as automating for speed, accuracy, alignment, and sustainability
• Participate in the decision-making process to identify the best solutions for Micron. This includes the collection of requirements and helping IT to analyze solutions vs the requirements
• Operate as an expert with respect to Micron’s vendor communications and security protocols
• For chosen external solutions, collaborate with the provider to become proficient in that solution to be able to perform as a Business Analyst as the project moves forward
• Collaborate with IT and the vendor to identify and close gaps between system capabilities and business requirements
• Teaming with the business and IT to develop and maintain a systems roadmap for the global backend at Micron
• Collaborate with all partners to ensure projects and work items are operationally ready within established timeframes and budget
• Identify and track overall project achievements, technical challenges, lead times and risk mitigation plans
• Monitor key performance metrics and participate in actions that support successful performance to plan
• Coordinate complex, multi-function projects requiring engagement of people across multiple sites and lines of business

Requirements:

• Bachelors in IT, Computer Science, Data Science, Physics, Mathematics, Electrical, Electronic, Manufacturing Engineering/Management
• Good knowledge of semiconductor Assembly & Test process and Key Manufacturing Systems
• More than 1 year of experience as a business analyst in a related field
• > 3 years of collaboration with Manufacturing and IT teams
• Experienced in collaborating with a global team across various time zones, including travel and off hour schedules
• Experienced with business process, business analysis, and project management Best Known Methods, especially pertaining to system processes and IT projects
• A proactive problem solver that communicates openly; take the initiative to assume added responsibilities.
• Has high level of self-motivation.
• The ability to be team oriented with a solid focus on effective team dynamics.
• Excellent verbal and written communication.
• Demonstrable ability to quickly learn new concepts (Team Center and Critical Manufacturing (CMF) learning curves are key)

Description:

Operations & Admin Support

• Conduct site surveys, inspections and investigative works related to building defects, facilities management, and construction activities.
• Assist the Senior Manager to oversee the day-to-day operation of ongoing projects by being the point-of contact between clients, engineers, site coordinators, subcontractors and authorities.
• Coordinate and provide timely update of project status by utilising the Project Management System to track progress.
• Prepare reports to detail findings of all inspections associated with structural investigation, periodic structural inspection (PSI), periodic façade inspection (PFI) and ad-hoc inspections.
• Follow-up with clients, engineers and all stakeholders on any issues related to site works, technical reports and feedbacks.
• Support the Drone team in the identification of defects and report writing.

Requirements:

• Preferably Civil, Structural Engineering background or related engineering field.
• Minimum have a bachelor’s degree in Civil Engineering.
• Possess some site experience in construction firms or projects.
• Able to carry out site inspections and identify common building defects and anomalies.
• Proactive team player and with good communication skills to bridge between team members and the Senior Management of NovaPeak.
• Able to provide technical advice and engineering support to any new areas of work.
• Willing to carry out ad-hoc tasks that may be assigned, especially in the area of gathering information.
• Possess basic Microsoft Office skills, Project Management Skills;
• Certification in Work-at-Height or any safety-related qualification will be added advantage.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficiently
• To assist engineers in day-to-day issues

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered(eg. M&E professional services, Green Mark Related work etc.)
• Help to review the works of the engineers assigned to you, with the objective of compliance to local authority requirements coupled with sound engineering principals

REQUIREMENTS :

• Degree in Electrical or Mechanical Engineering or equivalent.
• Minimum 5 years of working experience in M&E consulting firm.
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD / BIM software is an added advantage.
• Provide guidance to junior engineers.
• Able to work as a team, assertive, independant and proactive.

Interested candidates please submit updated resume via “APPLY NOW”.

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction.
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficientcy

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered (eg.M&E professional services, Green Mark Related work etc.)

REQUIREMENTS :

• Candidate must possess at least Diploma/Bachelor's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): English
• At least 2 Year(s) of working experience in an M&E Consulting firm.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD/BIM software is an added advantage.
• Able to work as a team, assertive , independent and proactive.
• Candidate without relevant working experience but with good interpersonal skills will be considered.

Interested candidates please submit updated resume via "APPLY NOW".

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Responsibilities

- To attend service fault call, troubleshooting and rectification work at customers’ premises.

- To co-ordinate with the customer and sub-contractor for ad-hoc service works.

- To carry out periodic maintenance servicing.

- To provide technical support including installation, testing and commissioning.

- To provide standby after-office hours.

- Able to work independently.

- Able to travel for overseas jobs.

- Able to work in Construction Site.

Qualification Requirements

- ITE Nitec and above / Technical certification or Diploma in Building Services / Security / Electronics Engineering / Electrical Engineering / Related working experience.

- Basic technical knowledge on ELV, Networking and Security Systems (Public Address (PA), CCTV and Card Access) will be an advantage.

- Applicants with experience in Bosch Public Address System, Integrated BIS, Video Management System & Stentofon Intercom will be an advantage.

- Preferred with Class 3 driving licence.

We're looking for a committed and independent individual to join our team.

You will be in charge of packing and dispatch of all online orders and managing warehouse inventory & attending to customer's emails

• Managing inventory, quality check and stock count.
• Unpack cargo shipments weekly
• Dispatching all online orders
• Reply to all online enquiries and is responsible for efficient, prompt and thoughtful response to customers.
• Handle and resolve customers' complaints, provide appropriate solutions, and follow up to ensure resolution.
• Uphold efficiency and customer satisfaction.
• Handle and process customer's exchanges and returns efficiently.
• Provide support to any ad-hoc duties as assigned.

Some traits that we are looking for :

• Positive with a willing to learn attitude
• Go-getters and someone who takes initiative
• Happy to work with a small team and a good team player
• Has a high level of professionalism, work ethics and honesty
• Meticulous

Requirements:

• Female
• A strong interest in fashion
• Strong command of English
• Min Diploma preferred
• Basic Excel Skills required
• Able to work independently
• Minimum commitment of one year
• Able to start work immediately.
• Only Singaporeans or PR

Kindly send in your resume, expected remuneration & recent photo of yourself to [email protected]

We regret that only shortlisted applicants will be notified

• Conduct feasibility study to develop basic and detailed engineering designs.
• Manage budget and resources to ensure timely project completion.
• Manage project to ensure compliance with legal and safety requirements.
• Motivate team members and develop their skills.
• Oversee workplace safety to ensure work is performed according to workplace safety procedures.
• Minimum 3 years experience in Building Construction works.

• Conduct feasibility study to develop basic and detailed engineering designs.
• Manage budget and resources to ensure timely project completion.
• Manage project to ensure compliance with legal and safety requirements.
• Motivate team members and develop their skills.
• Oversee workplace safety to ensure work is performed according to workplace safety procedures.
• Minimum 3 years experience in Building Construction works.

Summary:

The Executive, Sales & Operations is focused on inside sales operations and is expected to provide efficient sales support and manage inventory meticulously, ensuring smooth operations and excellent customer service.

Responsibilities:

1. Support sales operations and assist the sales team with orders, paperwork and customer inquiries.
2. Perform inventory control and keep track of products in stock, and place orders as and when needed.
3. Coordinate sales activities and ensure smooth operations.
4. Provide customer service and assist with order inquiries.
5. Keep inventory organised and updated.
6. Communicate with customers and the sales team to align and ensure everyone is well informed of updates.
7. Work collaboratively with the team to meet sales goals.

Requirements:

• GCE “O” level / Fresh Poly Graduate are welcome
• Experience in lighting would be an added advantage
• Excellent communication and organisation skills
• Independent, resourceful and results-driven
• Ability to work in a fast-paced environment

We are committed to fostering an inclusive and diverse workplace environment. We embrace individuals from all backgrounds and do not tolerate discrimination based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We believe that diversity enriches our team and strengthens our collective abilities.