Job Summary:

• Industry: Healthcare
• Location: Kent Ridge

Job Responsibilities:

• Assist the HOD and Manager in achieving the service goals, targets and department Key Performance Indicators. Updating and monitoring of performance indicators under his/her responsibility.
• Develop and make improvements to various programs to ensure minimal disruption to operations and to ensure that medical equipment is safe for use at all times.
• Manage maintenance agreements with vendors for the servicing and preventive maintenance of medical equipment.
• Prepare medical equipment specifications for tender; evaluate tender submissions and provide recommendations based on technical compliance.
• Provide technical assistance to hospital personnel in defining and evaluating medical equipment requirements.
• Advise or provide training to users on proper handling of medical equipment.
• Plan, supervise and coordinate the various programs for Senior Associate Engineers/Associate Engineers/Engineering Assistants in the commissioning, breakdown and preventive maintenance, inventory updating and de-commissioning of medical equipment.
• Assist in the preparation of monthly reports, annual capital and operating budgets for the department.
• Ensure BME work activities conform to standards and work practices that the hospital subscribes to - ISO 9001, ISO 14001 and OHSAS 18001, JCI, etc.
• Support and assist HOD and Manager in coordinating services for medical equipment projects with consultants, vendors, contractors and appropriate authorities.
• Perform any other duties as assigned by HOD and Manager.

Job Requirements:

• Degree in Biomedical Engineering, Electronic or Electro-mechanical Engineering or equivalent. Relevant industry experience with 3 to 5 years’ experience in similar capacity will also be considered.
• Good communication and supervisory skills
• Customer service oriented
• Positive work attitude and ability to work with all levels of staff

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret that only shortlisted candidates will be notified.

Registration No: R23113834

Job Description

• Provide 7 x 24 operational support for all production practices including weekends for applications
• Provide technical expertise to facilitate investigation of complex technical issues, with eye for details
• Uses technical knowledge to provide solutions to complex issues in a timely and efficient manner.
• Possess good domain knowledge on banking channels
• Possesses strong understanding of technical and subject matter expertise that can be leveraged to identify and escalate issues in a timely fashion.

Requirements:

• Experience Shell Scripting preferred. Other experience programming languages such as JAVA/J2EE, PL/SQL added advantage not mandatory
• Familiar with operating system such as Linux / Solaris / AIX / Windows
• Strong technical knowledge of Linux, AIX, JBOSS, MariaDB, KAFKA, Active MQ, SQL, Shell scripting and TWS Job scheduling
• Able to provide 24x7 operational support including Weekends and public holidays
• Very clear communication skills both written and oral
• Able to drive/recommend solutions to extended technology teams.
• Self-starter with excellent crisis management skills.
• Able to handle incidents and corrective actions follow-ups.

If you are keen, please apply direclty or alternatively reach out me on [email protected]

Contact: +65 90053495

Field Service Engineer

We are looking for experienced junior and senior full-time Field Service Engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description:

1. Oversees projects management and implementation;
2. Codify implementation design into documented for end user's record;
3. Conduct training and presentation for team members and end-users;
4. Provide technical testing or support to pre-sales engineer/customer on the network setup;
5. Assist on technical communications with customer/partner, to ensure closure of sales order;
6. Ensuring that the solution can deliver on the customer’s requirements;
7. Work closely with Level 2 support, if case issue is escalated to Level 3;
8. Maintain rapport with customers and competence in managing vendors; and
9. Any other ad-hoc duties assigned.

Job Requirement:

• Degree/Diploma in IT Networking or equivalent
• At least 2 years of work experience in a SI or distributor environment with network security skillset
• Good IT knowledge in OSI 7 Layer, TCP/IP, LAN/WAN technologies and network security
• Ability to work under pressure with minimal supervision
• Excellent in communication and analytical skill
• Experience in network security projects implementation
• Positive working attitude and a good team player
• Willing to work extended office hours and after office hours when needed
• Exposure to security solution such as Firewall, local balancer or endpoint protection will be an added advantage

Requirements:

• Knowledge and/or experience in Nutanix AOS/AHV and/or Hyper-V / VMware ESXi or other converged or hyperconverged platforms.
• Able to independently analyse and diagnose highly complex problems across different platforms
• Customer centric approach, excellent communication skills
• VMware certification such at VCP or VCAP is good to have
• Certified Nutanix (NCP) -Good to have
• Python/PowerShell scripting to automate tasks (Desirable)

Roles and Responsibilities:

• Assess current usage of Nutanix products (core and portfolio) and drive adoption - Ensure good customer experience by effective administration and support of customer's existing Nutanix environment, covering Installation and configuration of Nutanix core products Upgrades and patching Migration from 3-tier to Nutanix.
• Proactively monitoring of alerts and remediation
• Troubleshooting, performance and availability issues
• Capacity planning & reporting
• VM lifecycle Management (creation, deletion, cloning, snapshot etc.) -Collaborate with Nutanix support for advanced troubleshooting -Participate in planning and execution of DR drills
• Act as trusted advisor to customer while providing guidance on Nutanix best practices, reference architecture and validated designs.
• Collaborates with the Nutanix Sales Team in identifying and communicating new opportunities as well as ongoing customer status and reporting.

• Sales of Engineered Smoke Control Systems, related products and services.
• Develop new business opportunities, maintain and expand client database.
• Drive brand awareness and develop sales operational plans.
• Diploma / Degree in M&E or equivalent.
• Experience in Architectural Building Products industry with proven sales track record.
• Independent, self-motivated team player with good communication and presentation skills.
• Capable of handling multiple projects in a fast paced performance-oriented environment.
• Possess own transportation (preferable).
• Entry level candidates may also apply.

Remuneration will commensurate with qualifications and experience.

Job Description:

1. Front-line support for customer inquiries and issues via email and phone;
2. Diagnose and troubleshoot product configuration and functional issues remotely and onsite;
3. Effective escalation to Level 2 or product vendor for action and resolution;
4. Able to handle flexible working hours on demand basis; and
5. Maintain rapport with customers and competence in managing vendors; and
6. Any other ad-hoc duties assigned.

Job Requirement

• Degree/Diploma in Computer Science / IT Technology or equivalent
• Exposure to networking and security solutions such as firewall, load balancers, endpoint protection will be an advantage
• With working experience in an SI or distributor environment with network security skillset is a plus
• Good IT Knowledge in OSI Layer,TCP/IP, LAN/WAN and network security
• Ability to work under pressure with minimal supervision
• Excellent in communication and analytical skills
• Positive working attitude and team player
• Willing to work extended office hours when needed
• Fresh graduates are welcome to apply

Specific Responsibility:

• Performing lab-scale and pilot-level compounding of new polymer / filler systems.
• Performing injection molding to prepare the test specimen for plastic testing.
• Ensures that lab machinery is operated following established processing, quality, safety, and housekeeping procedures.
• Cleans and prepares machinery for efficient changeovers and subsequent compounding & injection molding process.
• Trouble-shoots processing problems to ensure production of quality products.
• Keep complete and accurate records of process records.
• Assists routine maintenance of machinery & auxiliary equipment.
• Maintains surrounding work area according to established housekeeping standards.
• Complies with established safety policies and procedures.
• Performs other duties as required.

Job Requirements:

• Support, assist other aspects of Engineering Centre operation as and when necessary.
• Diploma in Science or Engineering, preferably in material science, polymer technology or chemical engineering.
• Fresh graduate or 2 years working experience with polymer processing.
• Experience in polymer compounding & injection moding will be an added advantage.

Responsibilities:

· Involved in coordination and supervisor of construction works

· Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned

· Responsible for effective site management which include safety inspection and quality control of materials and plants on site

· Liaise effectively with clients, and other relevant government authorities to achieve delivery objections

· Utility cable works / Diversion works engineer onsite

Requirements:

· ITE of Construction or relevant

· site supervision work experience

· Minimum 2 years’ experience working

Electronics Design Engineer/Assistant;

• Degree/Diploma in Electronics/Electrical Engineering.
• Minimum 5 years if extensive PCB layout experience and familiar with Altium Design Software.
• PCB layout (gerber), provide BOM, testing instruction for PCBA.
• Ability to offer alternative parts for EOL components.
• Debugging, testing of PCBA failure and provide appropriate corrective actions in meeting customers specifications.
• 5-day work week (8:00am to 5:30pm)
• Close liaison with production team on manufacturing process.
• Liaison with sub-contractor on engineering issues where applicable.
• MS office proficiency.
• Salary S$4,000 to S$5,000/- pending experience in Design & Testing capability.
• Those with less experience will start as Assistant Design Engineer (S$3,300 to S$4,000)
• Only those with relevant PCBA design experience need to apply
• Bilingual
• 5-day work-week (8:00am to 5:30pm)
• Location; Toa Payoh

You will play a crucial role in overseeing the deployment, installation, testing and maintenance and technical support of healthcare technology solutions at hospitals, nursing homes and residential apartments.

- Work with stakeholders to prepare documentation and approvals for deployment works

- Perform routine maintenance, diagnosis and troubleshooting of technical issues related to systems

- Physical installation, repair of technology solutions

- Maintain records for projects

- Provide technical support to users. There will be occasional need to respond to system issues beyond working hours

Some familiarity in installation and system maintenance works, programming and electronic devices will be beneficial. In-house training will be provided.

Key Responsibilities:

• Digital control system analysis and design in switching mode power supply.
• Developing high power control (DSP) firmware to drive PFC, DC-DC conversion and various topologies.
• Experience in C and Assembly language programming.
• Good experience in embedded operating system development environment.
• ARM/ TI/ Microchip MCU architecture familiarity will be a plus.
• Communication interface skill: I2C PMBus, UART, CAN, USB, etc..
• Matlab tool usage and experience in digital control experience: Control theory, controller design and simulation.
• Knowledge in switching power supply is a plus.
• Cybersecurity knowledge and experience is preferred.

Key Requirements:

• Degree/ Master/ Ph.D in Electronic & Electrical or Computer Science.
• 2 - 8 years of relevant experiences in power management industry will be advantages.
• Experience in control topology study, transformer design study will be a plus.
• Knowledge on digital design, electronics and control system analysis.

As a GQ (Global Quality) Package Reliability Process Engineer, you will be responsible to setup new product package reliability requirement. This includes board level reliability to emulate customer PCB design. As process engineer, you are required to ensure the process control during package reliability and establish procedures to the operation team for execution. Process improvement is also required to ensure cost and productivity gain.

Coordinating with various supplier and ensuring the AVI recipe creation compliance to Micron specs are also required. Additionally, you will respond to inquiries from internal and external customers as a subject matter expert for package reliability activities.

Responsibilities and Tasks

AVI process development

• To work with AVI supplier for development of image screening recipe with using customer parameters or industry standard.
• Modify AVI recipe and program setting to fulfil customer requirements.
• NPI Readiness to ensure the recipe is available to cater for the new product.
• Collaborate within internal Micron Engineering team to establish AVI recipe for package reliability.
• Collaborate with SMAI team to establish AT ADC program

Evaluate and Improve Processes, Materials, and/or Equipment

• Identify, investigate, and document process deviations.
• Troubleshoot process deviations using systematic troubleshooting techniques.
• Perform risk assessment at all decision points within the qualification cycle
• Develop Process Reliability Methodology and Qualification

Lead development/improvement of Process, Equipment and/or Material

• Establish engineering evaluation (DOE)
• Identify factors that impact process quality and propose solutions
• Identify and evaluate interactions between equipment, processes and resolve potential issues
• Identify and implement equipment process control methods
• Develop process limits and capabilities (CpK) and lead process improvement evaluations

Introduction of New Process and Process Changes to Operation

• Implement new standard to align with changes of industrial standard for reliability process procedure.
• Conduct training/briefing for operation team on operation procedures
• Develop process reliability tests to assess new process failure mechanisms
• Ensure that test methodology follows industry standards, such as the Joint Electron Devices Engineering Council (JEDEC)
• Define process sampling plan and instruction.
• Strong trouble shooting skill using 8D
• Analyze and report results
• Analyze failures and coordinate failure analysis
• Develop process monitor plan
• Support Excursion Material Disposition

Establish documentation and procedure

• To establish document for new process and revise existing procedure whenever applicable.
• To ensure compliance to internal and external audit
• Observe all established EHSS policies, requirements, and procedures
• Follow EHSS guidelines included in work instructions

The Operational Residency Engineer may perform the following over the duration of the engagement:

Administration:

Monitors, reviews, and manages Dell EMC PowerEdge servers.

• Manages user requests.
• Manages and reviews log files.
• Generates regular operational reports.

Problem Management:

Isolates and troubleshoots incidents.

• Performs service incident coordination.
• Opens service requests on behalf of the Customer.
• Participates in root cause analysis review.

Change Management:

• Performs firmware/driver management assistance and collaboration.
• Implements change management requests.

Continual Service Improvement:

• Recommends procedure changes that result in operational optimization.

Technical skills:

• Windows, Vmware, server hardware setup
• Redhat Linux skills will be a plus.
• Min. Diploma in IT.

Interested candidates, please send over your resume to [email protected]

Strategic Priorities:

1. Be responsible for Mechanical design of equipment

2. Support the assembly and debug phases of the projects

3. Follow working instructions from Department Manager

4. Follow daily work activities defined by Project Manager

5. Additional responsibilities of Mechanical Engineer Level 2, Mechanical Design Engineer Level 3 or Assistant project manager may be performed as requested by Project manager

6. Be responsible for timely participating during meetings

7. Perform other duties as assigned by Project Manager

Main Responsibilities / Critical tasks

· Must be able to collaborate and communicate with suppliers as requested by Project Manager

· Must be able to improve and harmonize mechanical engineering practices as requested by Department Manager

· Participate in Project Design reviews

· Be responsible for successful design of systems to meet the budget and time expectations as defined by Project Manager

· Be responsible for Design Stations Level 1 and 2 based on project internal URS defined by Project Manager

· Be responsible for Design of mechanical cams with support of managers

· Support Validation team to create and test validation package per customer’s specifications

· Support Software Design Specification with the Control Engineer

· Release stations in the ERP system and follow up on delivery dates as instructed by Supervisor

· Be responsible for the creation of the assembly start package

· Be responsible for the design of pneumatic schematics following project specific requirements

· Be responsible for accurately and timely generating the Mechanical Engineering documentation package assigned to each customer project

Skills and knowledge requirements:

· Successfully perform “Main Responsibilities/Critical Tasks” items as described above

· Ability to make sound decisions, work independently and within a team structure

· Ability to function in a fast-paced work environment

· Well organized and respectful of project deadlines

· Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management

· Have good knowledge of industry accepted engineering practices

· Have good knowledge in solid works/ Inventor

Qualifications:

Degree / Diploma in Mechanical Engineering or 3 years of relevant working experience

Key Responsibilities:

• Digital control system analysis and design in switching mode power supply.
• Developing high power control (DSP) firmware to drive PFC, DC-DC conversion and various topologies.
• Experience in C and Assembly language programming.
• Good experience in embedded operating system development environment.
• ARM/ TI/ Microchip MCU architecture familiarity will be a plus.
• Communication interface skill: I2C PMBus, UART, CAN, USB, etc..
• Matlab tool usage and experience in digital control experience: Control theory, controller design and simulation.
• Knowledge in switching power supply is a plus.
• Cybersecurity knowledge and experience is preferred.

Key Requirements:

• Degree/ Master/ Ph.D in Electronic & Electrical or Computer Science.
• 2 - 8 years of relevant experiences in power management industry will be advantages.
• Experience in control topology study, transformer design study will be a plus.
• Knowledge on digital design, electronics and control system analysis.

Field Service Engineer

We are looking for experienced junior and senior full-time Field Service Engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Salary: Basic $3,500 - $4,500 + transport allowance (if drive) + VB

Time: Monday - Friday (8.30am to 5.30pm)

Location: Boon Lay Way

Responsibilities:

• Manage a portfolio of accounts and utilizes account management process to identify key customers and to develop specific action plans to grow identified accounts.
• Identify potential options that would be required to meet customer needs and work closely with Technical Support Team to make those options available to customers.
• Identify potential opportunities with existing and new customers and update customers on Service Valued Added Offering.
• Identify sales opportunities, elaborate proposals and coordinate other processes to ensure high level of customer satisfaction to build and maintain strong, long-lasting customer relationships.
• Resolve customer complaints by investigating problems with internal stakeholders; develops, evaluates, and discusses possible solutions internally and make recommendation to customers.
• Organize regular Service Reviews with customers and Ops team on hot jobs and critical issues.
• Understand customers / Vertical Market Needs and determines pricing and selling strategies.
• Prepare and reviews contract terms and conditions.
• Present the proposal to the customer.

Requirements:

• Diploma to Bachelor's degree in engineering with at least 2 years’ relevant sales experience.
• Knowledge in HVAC system, Chiller Plant, Airside, Energy Services and Building Services will be an added advantage.
• Ability to read, analyse, and interpret engineering documents.
• Ability to respond effectively to the most sensitive inquiries or complaints, to read and to comprehend instructions, correspondence, and memos.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Driven to delight the customer with options/offerings to meet their needs.
• Willing to learn new options/offerings and upgrade their skillset to better serve customers.

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

We regret to inform you that only shortlisted applicants would be notified.

Dynamic Human Capital Pte Ltd | EA License No.: 12C6253

Lon Kei Hin | EA Personnel No.: R23116368

Key responsibilities:

• Be the voice of the customer for quality and any other post-sale technical issue within Micron factories;
• Handle customer factory audit requirement
• Provide technical or operational quality issue resolution support to customers
• Lead critical customer quality improvements/projects/initiatives related to factories that can improve quality and customer satisfaction
• Ensure customer requirements are reflected in processes, procedures & standards
• Drive quality-related proactive and reactive communication
• Track, update & close all customer action items (AI) on time
• Work closely with the customer to resolve their key care-about
• Lead for quality scorecard tracking and improvements
• Run, schedule and lead quality engagements
• Communicate/track and close customer quality processes requirements
• Work with different internal teams to ensure robust, closed-loop on customer requests/ requirements
• Close collaboration with internal teams on the 8D problem-solving process to prevent reoccurrences

CQE Performance & Behavior Expectations

• Demonstrates leadership, pro-activeness, assertiveness and accountability
• Demonstrating intellectual curiosity to fully understand customer experience associated with quality issues identified is a key attribute to the success
• Team leadership- influencing, relationship building, customer focus, efficiency, and self- development
• Strong interpersonal skills at different levels including executives
• The ability and able to travel when required; travel required (about 10%)

Preferred:

• Familiarity with semiconductor fabrication and packaging technologies, device physics, quality and reliability fundamentals
• Good knowledge of SSD quality related items such as SSD test, production, IQC, RDT, QPA,
• SSD production troubleshooting and failure analysis experience
• Good project management
• Customer facing experience and SSD production process experience are preferred
• A high degree of shown self-initiative and ability to think and act independently
• Excellent English verbal, written communication skills, and presentation skills
• Outstanding multi-tasking and problem-solving skills
• Work under tight timeframes, prioritize exciting activities and strive for results is a must
• Collaborate with multi-functional teams to understand needs and translate them into actionable plans, work, and resource requirements
• Optimally interact with a wide range of personalities and handle conflicts in priorities

This is a global, multi-discipline team responsible for architecting and delivering secure, robust, and innovative solutions which would enable the development teams to build and deploy new applications as well as migrate selected existing applications into the public cloud.

The team works with multiple public cloud providers and are presently looking for an experienced Cloud Engineer familiar with various cloud concepts, services, and tools, preferably from multiple public cloud providers but primarily in the Cloud Identity and Access Management (CIAM) space. The candidate will be involved in multiple aspects of the team’s work, including evaluation of new cloud products and services, and integrating them into standard client cloud solutions.

Primary Responsibilities:

• Providing IAM solutions for migrating existing or integrating new applications in the Client environment across multiple Cloud providers including but not limited to Azure and AWS
• Provide IAM services for complex, multi-tier applications that are migrating to Cloud Platforms
• Selecting appropriate IAM Cloud controls for migrating applications based on given requirements
• Working in a globally distributed team to provide innovative and robust Cloud centric solutions
• Closely working with Vendors to develop and deploy Cloud services to meet customer expectations
• Integrate, configure, document, and deploy compliant infrastructure and supporting services in the Cloud platform
• Design, Optimization and Document the Operational aspects of the Cloud platform
• Troubleshooting problems, resolving root cause, and where possible, fixing the bug(s)
• Collaborate with Risk Management to ensure necessary controls to Cloud services are deployed and tested

Skills Required:

• Strong knowledge of Azure AD and related services such as Conditional access, Identity protection, Privileged identity management, etc.
• Strong knowledge of authentication with SAML, OAuth, OpenID, and Kerberos
• Experience in providing Federated Identity with solutions such as PING Federate or ADFS
• Knowledge of the Zero Trust Architecture principles
• Prior experience in providing RBAC solutions for AWS and Azure
• Experience creating technical architecture documentation
• Strong communication and written skills
• Strong scripting and automation abilities including PowerShell and/or Python

Skills Desired:

• Prior experience in the Identity space with a background in Active Directory or similar LDAP stores
• Working knowledge of Azure Active Directory Connect synchronization software or similar technology
• Prior experience using compliance assurance tooling such as Prisma Cloud
• Prior experience with products from HashiCorp such as Terraform, Vault and Consul
• Prior experience with risk control frameworks and engagements with risk and regulatory functions
• Knowledge and experience of working with CI/CD frameworks and methodologies such as automated testing (unit / integration) and release pipelines (e.g. Jenkins, GitHub Actions)
• Experience in the financial industry

Interested candidates, please send over your resume to [email protected]

Roles & Responsibilities

• FSC Section head to oversee FSC operations and liaison with Allied Teleiss Business Units to ensure RMA units meet the quality standards, deliver on time, manage the P&L of FSC Section and provide excellent service to ATI Groups.
• To manage and drive RMA output productivity .
• To coordinate wih internal teams such as Test & Pack, Material Planning/Logistics and Repair Analyst, to gather information to plan for RMA repair, provide schedule plan to drive for FSC RMA Output to meet Business Units shipment.
• To manage a group of Analysing Technicians/Engineers to conduct verification and 1st level failure analysis of respective BU RMA non-conformance unit, identify the cause of defect / non-conformance feedback, provde technical support in response to queries or concerns raised till closure.
• To manage and control Planning and Logistic team to co-ordinate & suport all BUs RMA transaction logistics management activities, ensure RMA units are processed in accordance to requirement and all information being updated into the system. To procure and arrange material to support debug, rework and ROI needs.
• To manage the Store and Material team to support all RMA related material transaction activities for repair, rework, assembly and re-configuration activities. Control and accountable for raw material inventories, tracking & recording of all material transaction.
• To manage the Final Assembly team to support debug team in PCBA reworking, ROI and re-configuration of mechanical assembly activities.
• To manage Test & Pack team to perform all functional testing of repaired RMA units as per respective product test procedures & software specified on Agile system.

Requirement

• Degree in Engineering or equivalent
• At least 10 years working experience in networking products and PCBA environment
• Good organising skill and self-motivated
• Able to work independently as well as a team.
• Good command of written and spoken Japanese language to report and liaise effectively with Japan Headquarter.

Responsibilities:

• Perform system administration (Windows and Linux support) such as system health-check, patch management, change management, problem resolution, capacity planning, system performance tuning and system installation/configuration/hardening.
• Manage and maintain cloud infrastructure systems such as VPC, EC2, S3, SES, load balancers, as well as cloud backups, monitoring tools and RDS database applications on Amazon Web Services (AWS) and Azure system.
• Manage and review costs in cloud systems.
• Develop technical specifications and evaluate technical responses as part of IT procurement.
• Support production system commissioning/upgrades and follow up on vulnerabilities identified during security reviews.
• Conduct annual disaster recovery planning exercise and follow up with DR procedure updates.

Requirements:

• At least 1-2 years of working knowledge in Amazon Web Services (AWS), or Microsoft Azure Cloud.
• At least 1-2 year(s) of technical experience in Windows Server 2012 & 2016, Linux OS and Active Directory.
• Working knowledge in areas such as Remote access, VPN, SSH, DNS, SMTP, FTP, Load Balancers, Proxy servers and Content delivery networks.
• Working knowledge in NAS and cloud backup solution.
• Strong security focus on experience with Firewalls, WAF and Server Hardening.
• AWS Certified SysOps Administrator or Microsoft MCSA, MCSE Azure track certification will be an added advantage.
• Candidate who has worked as Cloud Server Administrator will have an added advantage.

*Candidates with more relevant experience will be considered as Senior Systems Engineer.

1. Design, Test and Verify to ensure user application components meeting requirements and functional specifications.

2. Execute Unit, Regression, Integration, Performance and System Tests.

3. Work with software developers regarding test procedures and results to resolve issues.

4. Perform defect tracking management and follow through with solutions.

5. Participate in software feature design review, prepare, and publish test reports for software releases (both major and minor releases).

6. Review software documentation to ensure technical accuracy and completeness.

7. Design and implement tests using scripting languages and other tools used in manual testing environment.

Job Requirements:

1. Degree in Computer Science/Information Technology or related discipline.

2. At least 3 years of working experience in software testing development

3. Experience of leading and guiding junior team members

4. Working knowledge on web development

5. Experience with automated testing frameworks

6. Working knowledge of API testing. Strong understanding of and experience in HTTP, JSON

7. Proficient in Git version control system as part of SDLC

8. Familiarity with Performance Testing tools such as JMeter, LoadRunner, etc

9. Understanding of CI/CD pipelines (i.e., Jenkins)

10. Experienced with testing tools such as TestRail, etc

11. A proactive approach to problem-solving with strong analytical and research skills

12. Good at teamwork, result-oriented, and resilient.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Diploma/Bachelor's degree in Civil & Structural Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Fresh graduate is welcome to apply

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Diploma/Bachelor's degree in Civil & Structural Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Fresh graduate is welcome to apply