Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to manage the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.

• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.

• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.

• Contribute necessary improvements and offer advice about operational procedures.

• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications

• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.

• Work with the Service Department to resolve enquiries, if required.

• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.

• Able to travel in short notice.

• Good verbal communication skill.

• Physically capable and available to work overtime including weekends and public holidays.

• Ensure a safe working environment.

• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.

• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).

• Desirable overtime allowance after probation period.

Interested applicants can also send your resume/ cv to ‘[email protected]’.

Jason Marine Group Limited is a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

What you will do

• 6G technology research & development
• New technology prototype, proof-of-concept, and system validation/verification
• Develop technical proposals for international standardization
• Eco-system engagement for 6G initiatives

What you will bring

• MS or PhD degree in Electrical Engineering, Communication Engineering or related.
• Possess strong knowledge in digital signal processing (DSP) and have experience in evaluating and designing communication algorithms.
• Deep understanding of mobile communication system and specifications, including standards such as 3G, 4G, 5G, and beyond.
• Hands-on experience in practical implementation for wireless communication system. Programming skill in C/C++, Matlab, Python, Verilog or VHDL, etc. is preferred.
• Strong background in the wireless communication industry, with a proven track record of working on wireless communication technologies.
• Expertise in at least one of following special areas is preferred: artificial intelligence (AI) applied to wireless communication, satellite communication systems, or energy engineering related to wireless networks.

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

The Government Technology Agency (GovTech) is the lead agency driving Singapore’s Smart Nation initiatives and public sector digital transformation. As the Centre of Excellence for Infocomm Technology and Smart Systems (ICT & SS), GovTech develops the Singapore Government’s capabilities in Data Science & Artificial Intelligence, Application Development, Smart City Technology, Digital Infrastructure, and Cybersecurity.

At GovTech, we offer you a purposeful career to make lives better. We empower our people to master their craft through continuous and robust learning and development opportunities all year round. Our GovTechies embody our Agile, Bold and Collaborative values to deliver impactful solutions.

GovTech aims to transform the delivery of Government digital services by taking an "outside-in" view, putting citizens and businesses at the heart of everything we do.

Play a part in Singapore’s vision to build a Smart Nation and embark on your meaningful journey to build tech for public good. Join us to advance our mission and shape your future with us today!

Learn more about GovTech at tech.gov.sg.

Who We Are:

The Singpass team builds Singapore’s digital identity system. This includes various personal authentication protocols, data sharing tools, and corporate identity systems through Corppass. The team’s mission is to provide reliable digital identity infrastructure that streamlines transactions, enables businesses, and protects against fraud. As a software engineer, you will:

• Build prototypes to demonstrate technological opportunities
• Design system architectures
• Write production quality code
• Manage deployments to cloud infrastructure
• Maintain systems to a high level of reliability

Because our team focuses on pushing new initiatives, you will also have to:

• Identify potential projects that improve the public good
• Design novel systems that work around bureaucratic constraints
• Advocate and explain these technical ideas to other government agencies

We are also looking for experienced software engineers! In addition to the above, more experienced software engineers will be expected to:

• Establish best practices for developer operations
• Provide technical leadership across multiple product teams
• Share your expertise and mentor other engineers
• Help with recruiting

You're not just here to write code, but also to figure out what we should be building and how we should build it. You will work on meaningful projects that solve problems pertinent to our society. The public sector is full of opportunities where even the simplest software can have a big impact on people’s lives. Rather than work on commercial ventures commonly found in the startup scene, we're here to improve how we live as a society through what we can offer as a government.

Your job will be to bring expertise and capability to the public sector.

Sometimes this means coding new systems from scratch. Other times this means using the best solutions the development community has to offer. We use cloud services, open source software, and commodity hardware as far as possible. These often include, but are not limited to: GitHub, AWS, React Native, MongoDB, and Stripe amongst others. Knowing what to build and what to reuse lets us avoid wasting time on solved problems and focus on delivering actual value.

What it is like working here:

• Rapid Prototyping - Instead of spending too much time debating ideas we prefer testing them. This identifies potential problems quickly, and more importantly, conveys what is possible to others easily.
• Ownership - In addition to technical responsibilities, this means having opinions on what is being done and having ideas on what should be done next. Building something that you believe in is the best way to build something good.
• Continuous Learning - Working on new ideas often means not fully understanding what you are working on. Taking time to learn new architectures, frameworks, technologies, and even languages is not just encouraged but essential.

Who we are looking for:

We work mostly in Typescript. However, we don’t require experience in any specific programming language or technology. Core competency in at least one language and the ability to learn is what matters to us. We look for people who:

• Have a demonstrated ability to build software - Prior work and personal projects count for much more than specific degrees.
• Write code to solve abstract programming problems - Clear thinking, the ability to debug, and understanding the limits of an approach matter much more than getting the “correct” answer.
• Talk and reason about code with other engineers - We work as a team so you need to be able to not just solve problems, but have other people understand your solutions.
• Take initiative to make things happen - Our job is to push for change in government, so we need to challenge the status quo and not wait for instruction.
• Want to work for the public good - We are public servants, we serve the public. This sometimes means ignoring political pressures and misguided policies. We need people who will push back if something is not in the public interest.

Overall we look for people who have ability, initiative, good communication, and strong values.

Our employee benefits are based on a total rewards approach, offering a holistic and market-competitive suite of perks. These include leave benefits to meet your work-life needs and employee wellness programmes.

We champion flexible work arrangements (subject to your job role) and trust that you will manage your own time to deliver your best, wherever you are, and whatever works best for you.

Learn more about life inside GovTech at go.gov.sg/GovTechCareers.

Stay connected with us on social media at go.gov.sg/ConnectWithGovTech.

Wärtsilä is a world leader in marine technology and leading the industry's transformation towards a decarbonised and sustainable future. With the world’s widest portfolio and service network, we – Wärtsilians - deliver efficient, safe and sustainable integrated products and solutions to enhance the business of our customers. The opportunities presented through digitalisation and new technologies are offering a new era of shipping. Did you know that shipping is the world’s most efficient mode of transportation and that approximately 90% of world trade is carried by sea?

We want to change the course towards an interconnected and cleaner maritime future and are constantly on the lookout for future-oriented talent to join our team and to work towards enabling sustainable societies through innovation in technology and services - together. Are you ready to jump onboard?

We are looking for a Service Engineer, 2-stroke Services. This is a permanent opportunity, and its location is Singapore.

As a Service Engineer, 2-stroke Services, your responsibilities for the role include:

- Perform Field Service activities according to the work plan

- Perform mechanical/electrical and troubleshooting on 2-stroke engines and ancillary equipment

- Perform technical advisory for repair activities executed on customers' responsibility

- Commissioning of service products

- On-site team leading and managing of the assigned team and related activities during the work execution

- Interact with customers during the work execution

- Interacting with Field Services back office and Technical Services during work execution

- Perform internal and external progress status up-dates of the assigned work

- Ensure that the work is executed according to Wärtsilä Quality, Health, Safety, and Environmental guidelines and customer site procedures.

- Create the Service Work Reports

- Proactively consulting, advising, and promoting available Wärtsilä solutions and products to customer

To be successful in this role, we expect you to have:

- BSC Degree with 2-5 years of working experience in the related field

- Diploma in mechanical, and marine engineering with more than 5 years of working experience in the related field

- Excellent technical knowledge and problem-solving skills

- Good command of English, both written and oral

- Ability to work independently

- Willingness and flexibility to travel up to 80% of the time

- Ability to create internal and external work reports

- Ability to communicate and interact well with customers and other stakeholders

- Literacy in Information Management Applications/ Tools such as MS Office

At Wärtsilä we value, respect and embrace all our differences, and are committed to diversity, inclusion and equal employment opportunities; everyone can be their true self and succeed based on their job-relevant merits and abilities.

This is Wärtsilä

Wärtsilä is a global leader in innovative technologies and lifecycle solutions for the marine and energy markets. Our team of 17,000 professionals, in more than 200 locations in 68 countries, shape the decarbonisation transformation of our industries across the globe. Read more on www.wartsila.com.

Contact & next steps

Does this sound like the job for you? If yes, we hope to hear from you before the application deadline by submitting your application through our careers portal. Are you still wondering if you should apply and would like to get something clarified? Please reach out to David Samuel, Talent Acquisition Specialist ([email protected]) with any questions related to this position.

#FSWSCareers

Reporting to the Director of Sales, Domestic, you will be responsible for the revenue generation of assigned portfolios. You will also be expected to develop, service, retain, and acquire new business opportunities.

Duties and Responsibilities:

• Identify sales opportunities and develop new accounts
• Drive sales, monitor and track; and take necessary actions to ensure that goals are met
• Prepare and submit quotations, proposals, and tenders
• Ensure customer orders are processed accordingly
• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Enhance value-added selling approach
• Provide quality after-sales service to customers

The Successful Applicant:

• Preferably with a diploma or degree in Mechanical Engineering or equivalent
• Minimum 3 years of working experience
• Experience in Engineering or a related field would be an added advantage
• A team player who is meticulous and able to work independently
• Computer literacy (MS Office)
• Possess own transport
• Salary commensurates with qualifications and experience

We invite interested and qualified candidates to write in with their updated resumes (in MS Word Format) and their current and expected salary.

We regret that only shortlisted candidates will be notified.

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. of 8 years of relevant verification experiences.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

About the Opportunity

This role in our Technology squad is embedded in a high caliber, cross functional team that develops and executes our exciting technology strategy to deliver better outcomes for our business and customer.

As a Software Engineer, you will be working with an agile and innovative team and build on your technical expertise with a myriad of technologies, projects and platforms to deliver our business priorities and conquer technical challenges.

What You'll be Doing

• Support the delivery of projects in all aspects of Software Development Life Cycle including system analysis, design, development, quality assurance, UAT, maintenance and ongoing support.
• Contribute to Agile software development lifecycle and be familiar with DevOps processes.
• Develop pragmatic and fit for purpose solutions of high technical quality.
• Work with stakeholders to define and clarify functional requirements and scope to deliver robust cost-effective solutions.
• Maintain software design, engineering processes and quality standards.
• Identifying and addressing bottlenecks in the application or broader infrastructure.
• Assist with ad-hoc duties assigned by Manager.

What We Are Looking for

• Diploma/Degree in Information Technology/Computer Science or related fields.
• 2 years’ experience in full stack software development.
• Required skills: C#, .NET Core framework, Angular.
• Knowledge in DEVOPS, Docker Container, Cloud Implementation, Secured Webservice will have an added advantage.
• Highly collaborative team player, detail-oriented and passionate with technology.
• Ability to thrive in fast-paced, exciting environment.

We regret that only shortlisted applicants will be notified for an interview.

To learn more about our Organization, please visit https://www.alliancehealthcare.com.sg.

Job Title: Marine Construction Project Engineer (ID8353)
Location: Bukit Batok, Singapore
Working Hour：5.5 days (Monday to Friday 8-5, Saturday 8-12) but may required to OT due to project requirement (7am-7pm)
Salary: $3700 - $4600

Job Description:
-Pre-plan and prepare construction schedule, and coordinate activities.
-Follow up and report On-site and Off-site project management and progress.
-To prepare and submit progress reports as required by consultants and clients.
-Analyse project specifications, including civil/structural, architectural, and M&E drawings..
-Perform other project related administrative duties assigned.
-Coordinate, prepare and arrange site inspection with RE & RTO.
-Arrange daily Toolbox Meeting with Site Supervisor and WSHC and briefing on site activities and daily task. Arrange Site daily activities with Site Supervisor.
-Attend monthly, weekly safety meeting and site works with Client.
-Prepare necessary submission for project. Example, RFI, MS, RA, SWP, shop drawings and supporting documents preparation.
-To prepare and keep records, summary related to project. Maintain Project documents control for ISO purpose.

Requirement:
-Minimum Bachelor's degree in Civil Engineering only.
-Minimum 2 to 4 years of work experience in infrastructural or marine construction industry.
-Relevant project experiences in dredging, reclamation or near shore construction will be preferred.
-Knowledge of construction methods, materials, and BCA regulations.
-Working hour from 7am to 7pm from Monday to Saturday.
-May require to assist in variable projects.
-Strong organizational and communication skills.
-Ability to work well under pressure and in a fast-paced environment.

Job Title: IT Infrastructure & Support Engineer (ID7029)
Location: Clementi
Working Hours: Mon to Fri 830am-6pm
Salary: $4500

As a key member of the IT team, the candidate will be responsible for overseeing and optimizing infrastructure systems across both local and overseas sites.


Key Responsibilities:
• Manage and configure infrastructure systems (Active Directory, data centers, telephony, video conferencing, etc.) and network devices (firewall, VPN, wireless, etc.).
• Ensure automatic system backups, implement disaster recovery plans, monitor resource usage, and apply patches as needed.
• Coordinate with external vendors to ensure Service Level Agreements (SLAs) are met.
• Develop and maintain technical documentation such as admin and user guides.
• Provide technical support to local and international branches, ensuring LAN/WAN security.
• Source products, solutions, and vendors for project needs.
• Offer L1/L2 support and contribute as a team lead or member in various IT projects.

Requirements:
• Singaporean/ PR only.
• Diploma or Degree in IT/Computer Science, or a CCNA certification.
• Proficiency in English and Mandarin is required to liaise with overseas stakeholders.
• At least 1 year of experience in enterprise networking (WAN/LAN, VPN).
• Proficient in managing Microsoft Server, Microsoft 365, and Google Suite.
• Solid knowledge of TCP/IP, DNS, DHCP, Proxy, and Firewall setup.
• Familiarity with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless controllers.
• Strong understanding of CyberRisk, CyberSecurity, and PDPA.
• Experience with Veeam, VMware, UNIX/Linux, API/Web programming, and database management is a plus.

NousQ is a Singapore-based company focusing on research, design, develop, manufacture and commercialize medical technology and solutions that optimize healthcare delivery and serve large unmet needs for patients. The focus is on patient-centric solutions that patients really want and need. NousQ is proud to be the Top 5 winners of the Medtronic APAC Innovation Challenge 2022, and is honored to be the winner of other innovation challenge such as MedTech Innovator Challenge APAC 2022 Accelerator Cohort, Victoria Health Week MedTech Festival as well as the recent China TusStar APAC Challenge.

Currently, NousQ is looking for a passionate Firmware Engineer to join our growing team. We want to introduce the world to CLiKX, a revolutionary and cutting-edge robotic medical device. CLiKX will transform the way glue ear surgeries are now performed by moving the procedure from the operating room to an outpatient setting. As a result, the time, money, and resources needed for such a procedure are significantly reduced. A talented and motivated engineer has the opportunity to join our team of pioneer innovators in bringing CLiKX to the millions of untreated children who suffer from glue ears.

Profile / Qualifications:

This position is for an engineer with Bachelor’s or Master’s degree in Computer Science/ Electronics/Computer Engineering with 1 – 2 years of experience in embedded system development. Fresh graduates with relevant experience may be considered. The engineer will be a part of the startup team focusing on new product development.

· Good understanding of product realization process and preferably with prior experience or interest in medical device software design and development processes.

· Relevant experiences include coding with programming language such as C/C++ and/or competent in applying other similar IDEs/ toolchains for firmware development.

· Knowledgeable in quality concepts including verification and validation, and reliability testing.

· Good understanding of medical device software regulatory requirements, such as IEC62304 is a plus.

· Experience in AI-related development is a plus.

· Excellent communication skills in spoken and written English and good inter-personal skills to engage and interact with team members, vendors, consultant and any potential third party.

· Possess a high level of integrity, independent, self-motivated and enjoy working in a fast-paced startup environment.

Job Description

The responsibilities in supporting product development team include but are not limited to:

· Participate in ideation, conceptualization, design and iteration, verification and validation, manufacturing support for new product pipeline involving firmware.

· Involve in design reviews to identify issues and derive robust solutions that meet the intended use, safety and effectiveness, as well as quality of the product.

· Collaborate with manufacturing partners to communicate design concepts, technical and/or business trade-offs, and engineering solutions.

· Perform firmware engineering tasks including:

(i) Translate / refine high-level requirements into the architecture and engineering specifications of the firmware system

(ii) Design, develop, integrate and debug/troubleshoot the embedded system / MCU related hardware to meet the defined objectives, targeted cost and schedule.

(iii) Support the development and execution of relevant test plans, including unit test, integration test and system test to verify and validate that the product is able to meet all requirements.

(iv) Support functional and reliability tests to ensure safety and performance of the overall product systems.

· Generate and maintain the necessary documentation for the firmware systems, including design documents, firmware architecture, schematics, SOP/work instructions, Device Master Record (DMR) and other documentations needed to meet the regulatory requirements such as Design History File (DHF), IEC62304, ISO13485 & FDA 21 CFR Part 820.

· Oversee firmware design change orders and support any relevant verification and validation activities.

· Support ad-hoc administrative duties as and when required to ensure smooth operation of the company’s activities.

Diploma or Degree in mech/ civil/ industrial engineering with 6-10 years of experience , Willing to work at construction site and process plants . Expect fabrication, piping standards, equipment installation , with erection and commissioning knowledge . Atleast 2 of the above is a must . Candidates without necessary qualifications but willing to learn and come up are encouraged to apply too

If you fancy a cool, easy-going atmosphere full of dynamic and spirited individuals, you are at the right place.

We are on the lookout for passionate, optimistic and fun-loving people to join our big family of Wonderful People.

With our wide array of hotels and brands, there are countless opportunities and exposure to work in different stories. You will be immersed with prospects in career and learning development, employee recognition, mentorship and benefits even when you travel.

Job Details (Here’s what you can expect!)

• You get to work primarily in 1 of our 25 hotels in Singapore
• 5 days’ work week and overtime
• Duty Meal allowance and uniform allowance
• Attractive incentive and bonus
• Staff rates at Accor hotels in Singapore and worldwide
• Birthday leave

Requirements

• 1 to 2 years working experiences, preferably with relevant hands-on experience in building related or hospitality industry.
• Degree in Engineering is preferred or equivalent.
• Resourceful, proactive and team player.
• Good interpersonal and communication skill.
• Service-oriented with good personality.

Responsibilities:

• Attend to complaints/ reporting of breakdown of services within the hotel premises.
• Diagnostic testing and inspection for all electrical and mechanical equipment, sanitary and plumbing system, and arrangement of faulty items for repair work.
• Diagnostic testing and inspection of air-conditioning system including fan coil unit, compressor, control IC board and piping works for both preventive and repair work.
• Managing stocks for M&E spare parts, electrical works, sanitary and tracking of stock level.
• Ad-hoc duties as per assigned

Responsibilities:

To support the Personalization department to operate & manage customer’s product efficiently. Owner of the local personalization process, CR and UAT/BAP.

• Lead any new project triggered by Sales Support / R&D on operation point of view and analyse impacts to get production constraints integrated
• To be responsible for producing sample and UAT/PAT cards in the course of Order Tendering process and Profile Development phase.
• Own the integrated change management process on job setups, product matrix and templates as needed to provide customer(s) their requested output
• Trigger and Lead internal project in order to increase productivity, improve security and reduce operational cost by applying “lean” concepts
• Ensure the installation and testing of new software packages (data processing, Perso machine or Perso controller software), related to a product release or new product / customer, in coordination with Perso development teams (GGS, France)
• Ensure full automation of daily processing of customer data and report generation
• Troubleshoot data processing issues working as needed with IT and GGS
• Investigate and develop on-site new tools to improve Personalization Data Flows, Quality or Production Efficiency
• Ensure the installation and test of corporate tools in coordination with Central Industrialization Team (CIT)
• Provide operational support to the production group to help rectify problems occurring during UAT/PAT and production process
• Initiate action preventing the occurrence of any non-conformity relating to the product, process and quality system.
• Identify and record any problems relating to the product, process and quality system
• Elaborate and maintain proper Documentation (Procedures, Logs and Specifications) for internal use, customer audit or certification
• Support Personnel training (operators, logistics, customer service) in case of new software tool implementation with new Human Interface design

Requirement:

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

• Bachelor’s Degree in Engineering or Computer Science with an Information Technology or Programming Knowledge
• Project Management Certification will be an added asset
• Green Belt six sigma Certification will be an added asset
• At least 4 years’ related experience in process/manufacturing engineering environment
• Experience in leading industrialization project and new process implementation
• Experience in Visual Basic, SQL, and Access is required. Knowledge of other programming languages, Oracle and OS/2 is an asset
• Good interpersonal and communication skills to communicate with customers and different levels within Thales
• Possess initiative to handle improvement and upgrading activities
• Work well in fast paced environment
• Able to work under minimal supervision
• Able to work in multicultural environment

Procurement Specialist (Contract)

You will be responsible for the procurement of spares/parts, supplies and services for the maintenance and operation of the power plant and its facilities.

Responsibilities

• Collaborate with plant engineers and personnel from the maintenance / operations / facilities teams on the requirements of the materials / services based on stipulated technical specifications and scope of work descriptions.
• Perform sourcing activities from both local and overseas vendors.
• Prepare and send out RFQs to the relevant suppliers/vendors and monitor their submissions.
• Conduct supplier evaluation and manage selection processes to ensure submissions are in line with the technical and commercial specifications.
• Expedite the delivery of the order and communicate with the internal stakeholders for any changes to the order as needed.
• Resolve supply, quality, and service invoicing issues with vendors and ensure commercial, legal and contractual compliance in all the procurement transactions.
• Undertake procurement continuous improvement initiatives.

Requirements

• Engineering degree in Mechanical / Electrical / Control & Instrumentation or equivalent.
• Technical procurement experience in a similar environment will be advantageous.
• Strong technical knowledge and evaluation writing skills.
• Excellent planning, organising, communication, and negotiation skills.
• Proficiency with MS Office suite especially Excel. SAP experience will be a plus.
• Resilient, self-driven and independent team player with the good ability to work multi-task and meet deadlines.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

Eigen is a startup in renewable energy. We are a systems integrator focused on providing clean energy to all customers, and their end-users, and are equally as dedicated to supporting our employees and value what makes each individual different, and encourage them to act on their ideas.

We are looking for a Project Engineer to assist with the scheduling, planning, forecasting, resourcing, and managing of technical activities to ensure project accuracy and quality.

The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

Responsibilities:

• Preparing, scheduling, coordinating, and monitoring assigned engineering projects
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team
• Interacting with clients, interpreting their needs and requirements, and representing them in the field
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status
• Cooperating and communicating with the Project Manager and other project participants and collaborating to create more efficient project methods and to maintain the project's profitability
• Reviewing the engineering tasks and initiating the necessary corrective actions
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications

Requirements:

• Degree in Engineering, Renewable Energy or a related field
• Experience in solar systems integration
• Experience in Microsoft Office and Autocad (PVSyst software experienced preferred)
• The ability to work with multiple discipline projects.
• Excellent project management and supervision skills
• Excellent organizational, time management, leadership, and decision-making skills

Good to have:

• Certifications in WSH safety courses such as Working at Heights, Workplace Safety and Health in Construction is an added advantage
• Knowledgeable in applicable codes, policies, standards, and best practices

While skills and experience are important, we place equal importance on a candidate’s resourcefulness, adaptiveness and the ability to prioritise and find solutions appropriate for a situation.

Job Description:

- Integrate, install, service, and troubleshoot auto-mechanical, electrical, and electronic systems, according to process instructions

- Carry out calibration / acceptance test on sub-systems/equipment, according to process instructions

- Perform functional checks, setting, testing, fault finding and failure analysis

- Provide support services in users' training courses, and other operational exercises

- Liaise with customers on schedule, planning, monitor, control, and execution of works

Job Requirements:

- Diploma in Electrical/ Electronics/ Mechatronics/ Mechanical Engineering preferred

- Able to interpret schematics, technical manuals, and drawings for assembly and maintenance works

- Good verbal and written communication skills

- Ability to use analytical skills and a "hands-on" person

- Good interpersonal skills, proactive and work well with others

- Preferably with valid Class 3 driving license

Roles & Responsibilities:

. Monitor progress, quality of workmanship and compliance with authority requirements.

. Highlight and advise the project staff on the interfacing of M&E services and the building works

. Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission

. Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission

· Able to understand and has a good knowledge in electronics (e.g. Electronic Circuit Diagram)

· Able to read and draw floor plans and schematic diagrams using AutoCAD

· Able to communicate well in written and verbal communications

· Able to work independently and adapt to a dynamic working environment quickly

· Participate in product requirements definitions

· Develop hardware requirement and specification documentations

· Participate in test strategy development, methodology, test plans and cases

· Design and integrate power electronics and motor control system

. Motivated, responsible with positive attitude and able to work under pressure and stress.

. Successful candidate able to work after office hours depend on site/project schedule

· Knowledge in electrical termination and troubleshooting is an advantage

· Knowledge of computer skills and software such as Microsoft (Excel, Word, PowerPoint)

· Able to work under pressure to meet project deadlines and multiple accounts/projects.

· Proficient in writing daily reports

· Perform project coordination, system installation, termination, testing & commissioning

. Leading Testing and Commissioning of project team and conduct training to customers after completion of project.

. Provide technical support to customers and site project team in the selection of equipment for the project.

. Support in acquiring new opportunities – Tenders and Business Development.

. Performs other duties as assigned.

· Perform user operation training of the system installed

· Organized, fast learner, proactive, able to multi-task and with positive attitude

. Support internal for spare parts warranty, preparation, and assembly.
. Improve on site report and process.

. Excellent problem-solving skills, attention to detail, and the ability to work in a fast-paced startup environment.

. Strong experience with PCB design, layout, and simulation tools (e.g. Eagle, Autocad).

· Perform field service to troubleshoot and rectify system fault

· Required to carry out standby duty for servicing and answering calls

· Attend site coordination meeting and site walk

. Able to coordinate with contractors and consultants for engineering issues and drawing plans.

. Perform all duties in accordance with company policies, processes, systems and procedures.

ABOUT AMS

We’re inventing the future, right here, right now, at Thales. We design the critical security solutions of tomorrow by combining the curiosity to explore, the intelligence to question and the vision to create. Together we solve complicated problems by combining our experience in the market with our leading research and development capabilities.

Be part of revolutionising our skies for the future of aerospace. A future where all modes of aircrafts piloted or unpiloted, civilian or military move around our skies safer, more efficiently and sustainably for a greener and more harmonised airspace.

ROLE DESCRIPTION SUMMARY

The Senior Network Engineer is responsible for the provision of network integration activities for the respective project and/or bid activity. The Engineer is a key member of the Hardware Deployment & Integration team that provides:

• Technical and resource supervisory input to Network Integration and Deployment engineering activities

• Skilled input to the Network Integration and Deployment activities within the respective project engineering segment, and

• Assistance to the Integration Group for bid response activities.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Network Engineer, you are accountable for:

For Projects:

· Revise solution architecture drawings and diagrams, cost templates (devis), the List of Supply (LOS) / Bill of Materials (BOM), and interfaces at the start of the project.

· Create and/or update network integration engineer contributions to the Solution Specification and Design documentation, Network Acceptance Test Procedures, and other associated network integration documents.

· Define equipment configuration for the ATM solution(s) and coordinate with Hardware Deployment and Integration management for assembly of the ATM system and interface with Tools Engineering, Customer Service and Site Services departments where necessary to accomplish this task.

· Load, configure, validate, and hand over equipment to Software Integration in the factory and on customer sites.

· Support configuration changes to system platforms in factory and customer sites.

· Attend Design Reviews with customers.

· Provide customer training.

· Identify risks at solution architecture level and propose where possible alternate validated solutions.

· Provide system and networking expertise useful in the design.

· Follow and contribute to the development and enhancement of engineering processes

· For Bids / Tenders:

· Creation and Peer Review system architecture diagrams.

· Creation of the List of Supply (LOS) / Bill of Materials (BOM)

· Creation of Hardware Integration section in the Engineering Department devis.

· Definition of system interfaces.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

Relevant bachelor’s degree or Master Degree

Technical skills

§ Must-have

ü Cisco formal certifications (CCNP, CCNA etc)

ü Good level of knowledge of, and experience with Unix/Linux (Redhat distribution preferred) Operating System

ü Familiarity with a wide range of Computer and Networking hardware (preferably Cisco)

ü Scripting (TCL/TK, Perl, & Shell)

ü Able to work on multiple activities con-currently and effectively self-manage (autonomy)

§ Nice-to-have

ü Work experience in a mission-critical, near real-time environment preferably ATC-related

ü Experience in large and distributed networked computer systems

Interpersonal skills

ü Sense of ownership

ü Team player

ü Verbal and non-verbal communication,

ü Listening skills,

ü Problem solving,

ü Decision-making,

ü assertiveness,

ü patience,

ü empathy

1. Provide technical support to business opportunities.

2. Support to Project-designated product or proposal. Comprehensively coordinate resources, successfully accomplish project POC (Proof of Concept) with significant effectiveness.

3. Prepare project delivery, plan design and review, testing and verification, to ensure that the solution can be stably implemented.

4. With active promotion, projects executed in reasonable process, and delivered with high quality and detail and accurate project materials and deliverables in time.

5. Quickly solve problems in the progress and receive good comment from customers; promptly feedback problems to corresponding departments with advice valuable for effectively improving products and solution;

6. Continuous follow-up on Projects, maintain project delivery record and data sorting; participate in project acceptance test and presentation, and produce project summary report after completion of the project.

7. Collection and Analysis of System and Product Needs, Output of Quality Report, Collection and Analysis of Competing Product, Comprehensive Record of Mid/Large-scale System Implementation.

8. Provide technical support in new product/proposal introduction, material output of product technology, material output of product promotion, marketing activity support.

9. In charge of Planning and Implementation of Customer/User Training

Responsibilities:

1. Responsible for technical support;

2. Write product solutions and responsible for inquires of technical parts of related products.

Requirements:

1. At least Polytechnic or Bachelor’s degree in engineering, telecommunication or computer science related.

2. At least 1 year experience of technical support in IT/CCTV/telecom related industry;

3. Good communication skills and sense of customer-focus, fluent in English and Mandarin preferred as role requires candidate to deal with Mandarin speaking clients.

Responsibilities

• Work with outsourced service providers and product principals to manage the delivery, operations as well as Tech Refresh for Microsoft suite of services:o Microsoft 365 (such as Exchange Online, OneDrive, SharePoint Online,Teams, Viva etc.)

o Dynamics 365 including Power BI, Power Automate and Power Platform

o MS Enterprise Mobility Suite (Intune, MCAS Azure Information Protection)

o Microsoft Entra (configuring and setting up the synchronisation of on-premise AD with

Microsoft Entra ID, federation services)

o Other Microsoft products such as Stream, Telephony services.

• Ensure the operations process and controls are clearly documented and operationalised
• Plan, design and support Technology Refresh and migration activities for the infrastructure services.
• Ensure smooth service delivery and implementation within the business context.
• Understand technical, quality management and security guidelines and policies and ensure operations processes and supporting systems comply with these policies and guidelines.
• Manage infrastructure operations and support and ensure delivery of services meet agreed service levels.
• Propose new solutions to enhance operational efficiency and improvement of infrastructure.
• Other duties as may be delegated by the Manager or Team Lead from time to time.

The Procurement Executive plays a crucial role in ensuring efficient and cost-effective procurement of equipment, services, and supplies for our fleet. This position involves close collaboration with the Purchasing Manager, vessel crew, and suppliers to meet the operational needs of our ships while adhering to company guidelines and industry regulations.

What you will be doing:

• Assist the Procurement Manager in daily procurement activities, handling ad-hoc tasks as required.
• Develop comprehensive plans for acquiring equipment, services, and supplies, considering factors such as cost, quality, availability, and lead times.
• Review existing administrative procedures and systems, identifying opportunities to streamline and improve efficiency in procurement processes.
• Ensure all procurement activities comply with the organization's purchasing guidelines, procedures, and relevant industry regulations.
• Track costs and expenses related to procurement, contributing to the preparation of accurate budgets.
• Arrange timely and cost-effective shipments of stores and spares via air, sea, and road freight to both local and international ports.
• Conduct occasional inventory and storeroom inspections on ships to understand crew needs, maintain positive relationships, and address procurement-related issues.

What we are looking for:

• Diploma in Business, Supply Chain Management, Logistics, Maritime Studies, or related field.
• 1 year of experience in shipping operations or a similar role. Fresh graduates are welcome to apply.
• Knowledge in technical shipping management is a plus.
• Proficient in Microsoft Office Suite and Ship Procurement System
• Good communication and interpersonal skills.
• Meticulous attention to detail and accuracy.
• Independent, resourceful, pro-active and team player.
• Sense of ownership and urgency.

The ideal candidate is a skilled engineer and works physics simulations, 3D volume image construction, signal processing, electromagnetic control with AI.

Responsibilities:

1. Strong mathematical skills - good foundations of linear algebra, matrix, differential algebra, statistics.

2. Strong physics skills - good knowledge of electromagnetism, finite element methods, and classical mechanics.

3. Strong problem solving and engineering skills.

4. Strong python, C++ or java coder

5. Good knowledge of python tools such as tensorflow, pytorch, numpy, pandas, sklearn, scipy, seaborn

6. Proficient in building deep learning neural network models

7. Published papers in top machine learning or computer vision conferences, ICML/NIPS/CVPR/ICCV

Education/Professional Qualification:

Bachelor's, Master's or PhD degree in Engineering or Computer Science or Mathematics or Physics.

Requirements:

1. Strong mathematical skills - good foundations of linear algebra, matrix, differential algebra, statistics.

2. Strong physics skills - good knowledge of electromagnetism, finite element methods, and classical mechanics.

3. Strong problem solving and engineering skills.

4. Strong python, C++ or java coder

5. Good knowledge of python tools such as tensorflow, pytorch, numpy, pandas, sklearn, scipy, seaborn

6. Proficient in building deep learning neural network models

7. Published papers in top machine learning or computer vision conferences, ICML/NIPS/CVPR/ICCV

Job Title: Site Engineer (Electrical) (ID5084)
Location: Paya Lebar / On site
Working Hours: Mon to Fri 8am - 5pm, Sat 8am – 4pm
Salary: $2800 - $4000

Job Description:
• Capable of reading electrical and ELV drawing schematic diagram drawing.
• To coordinate and liaise with Client/Sub-Contractor on project and maintenance related matters to ensure to smooth execution of site work.
• Able to review and understand contract specification, prepare and submit variation order as according to the requirement.
• Able to perform engineering design, load and fault calculation.
• Able to resolve technical issues related to installation, commissioning and testing.
• Ensure the installation works are done according to the approved shop drawing, method statement, project specifications and relevant standards.
• Attend regular site meetings with Client/Sub-Contractor to discuss and resolve the site matters.
• To assist Project/Site/Construction Manager on in handling and monitoring the project progress.

Requirement:
• ITE/Diploma/Degree or equivalent in Electrical Engineering.
• Experience in project management handling for industrial or commercial purpose.
• Experience in MRT Project is a bonus.
• Knowledge in designing phases or street lighting works related is a bonus.
• A team player and possess problem-solving, coordination and management skills.