Become part of a cohesive team dedicated to delivering optimised outcomes in the dynamic hydrocarbon market under the refinery robust conditions. We are seeking a Production Control Planner who thrives in a collaborative environment and is keen to make a significant impact to the refinery production and supply chain. Both experienced and fresh graduates are welcome to apply.

Key Responsibilities:

• Coordinate with stakeholders to develop daily production plans and develop Oils Planning strategy for major Turnaround.
• Oversee execution of production plans through close coordination with Operations and stakeholders.
• Collaborate with feedstock and supply teams to ensure timely feedstock discharges and product loadings.
• Maximize refinery HVP (High Value Product) yield through blending optimization.
• Maximise revenue through proactively identifying, evaluating, and implementing optimisation opportunities
• Coordinate with stakeholders to address and resolve quality or plant issues promptly, while ensuring safe operations.
• Identify and address gaps in planning and production processes, and product qualities

Requirements:

• Degree in Chemical Engineering
• At least 3 years’ experience in petrochemical or oil refinery industry. Fresh graduates may be considered, and relevant training will be provided.
• Strong analytical, problem-solving, and inter-personal skills.
• Experience with workflow automation, data visualisation, or scheduling software will be an added advantage

Job Description

This is an entry level professional quality position with QA/QC responsibilities, you will play a crucial role in maintaining and improving the quality of our products/services throughout the entire lifecycle.

You will collaborate with cross-functional teams to identify quality issues, develop and implement quality improvement initiatives, and ensure compliance with applicable standards and regulations.

Your role will be essential in delivering products that meet customer expectations, enhancing customer satisfaction, and optimizing overall business performance.

Job Responsibilities :

Quality Assurance:

• Develop, implement, and maintain quality assurance policies and procedures.
• Conduct audits and assessments to identify potential areas for improvement.
• Collaborate with production/development teams to establish quality standards and ensure adherence to them.
• Monitor product/service quality metrics, analyze data, and provide reports to management.
• Track, investigate, and resolve customer complaints and product issues, implementing corrective and preventive actions as needed.
• Conduct risk assessments to identify potential quality-related risks and develop risk mitigation plans.

Product/Process Improvement:

• Identify opportunities for process improvements and contribute to continuous improvement efforts.
• Implement statistical tools and quality methodologies to analyze and improve processes.
• Collaborate with R&D or engineering teams to introduce new products or implement product changes with quality in mind.

Quality Control:

• Perform inspections and tests during various stages of production to ensure compliance with quality standards.
• Develop and maintain inspection procedures and inspection criteria.
• Work with procurement to ensure the quality of incoming materials and components.

Other responsibilities:

• Supervise and train junior lab technicians and interns where applicable.
• Provide formal reporting on plant performance and issues.
• Lead efforts to ensure good 5S in the laboratory to ensure a safe and efficient workspace.
• Ad-hoc duties/assignments by supervisor.

Requirements:

• Degree in Chemistry or related field with strong Chemistry component of three years of experience.
• Proven experience in quality engineering or quality assurance roles.
• Strong knowledge of quality management systems, methodologies, and tools
• Able to work in a fast-paced environment.
• High level of problem-solving skills; Organized, Quality / Meticulous.
• Team player with strong interpersonal and multi-tasking skills that can complete tasks with proper time management.
• Must be able to commit for 1 year
• Working Location: Gul Lane, Tuas
• company transport provided from various MRT location: Boon Lay, Jurong East, Chuo Chu Kang, Outram Park and Bedok MRT

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are Solar's most trusted!

RESPONSIBILITIES

This is a quality engineering position. The incumbent shall execute the quality assurance role with good technical rationale and understanding, acquired from developing an appreciation of the industry practices, and applicable technology developments.Scope of work includes quality assurance planning, supplier management, in-process quality control design and outgoing quality controls. Fresh graduates are also encouraged to apply, and for those who wish to make a career in Quality in a World Class High Tech Manufacturing Facility in Singapore.

Essential Duties and Responsibilities:

Quality Assurance Planning

• Develop and implement quality control plan for adequacy and suitability for the production and during new product introduction
• Drive improvement of material, process and product quality by monitoring quality indicators (SPC, defect rates)
• Non-conforming materials and products management
• Benchmark, develop/innovate and implement inspection methods and procedures to meet quality objectives, product quality, quality assurance, technical goals and productivity savings.
• Support customer audits and 3rd party inspection routines (by way of preparing quality data presentation, technical write ups)

Supplier Management

• Manage the qualification of new materials/suppliers & incoming quality of the materials
• Drive supplier quality through audits to ensure conformance to specification and continuous improvement in system, procedures and processes.
• Drives supplier performance through processes, efficient rating system and reviews.

Supervision of Quality Inspectors that support Production Operations

• Manage team of quality inspectors on daily routines and communications
• Plan shift activities with inspector team leads

Projects

• Develop understanding of product reliability and its corresponding components' contribution (based on product performance characterization and defect understanding)
• Support product qualification process (Provide quality requirements in FMEA, SPC, DOE, Control plan and other processes and procedures as required/suitable)

Quality Management System

• Participate in internal quality audits to drive conformance and continuous improvement in product quality
• Execute in accordance to QMS requirements (ensure timely updates to documents, WI, SOPs)

Communication and Presentation

• Ability to communicate and present at all levels of the organization.

Technical / Professional:

• Minimum bachelor's degree (engineering discipline). Preferably Mechanical or Electrical.
• Engineering knowledge in SPC controls or lean and six sigma methods and software tools.
• Engineering knowledge in using quality tools for problem solving
• Aptitude in higher level use of Excel (E.g.: Formulas and Macros) is an added advantage

Technological:

• Interest in following up and developing understanding of the technological developments in the industry on both products and components
• Expect to develop as an expert in Quality Management Systems and related standards and requirements (ISO 9001, IEC62941), if not already adept.
• Experience in reliability engineering would be advantageous.

General:

• Strong sense of ownership and self-motivation, good initiative, work independently.
• Proactive working attitude hands on approach
• Ability to handle experimental planning and perform product testing and report writing.
• Excellent presentation, interpersonal and communication skills with demonstrated ability to communicate effectively with all levels of management, both internally and externally
• Good time management with ability to handle pressure and multitask under tight timelines
• Willing to travel

People / Relations:

• Ability to interface and communicate effectively with cross-functional team and external

Job descriptions:

• Perform CNC programming for precision parts as per drawing or technical specification.
• Perform CNC milling & lathe programming and setting of CNC machines.
• Check materials and tools required to perform programming.
• Set parameters (feed rate, speed, etc) according to materials and tools selection in order to achieve optimum speed.
• Perform progressive machining operations for precision parts.
• Troubleshooting.
• Perform details machining process plan and estimate cycle time.
• Technical support for daily manufacturing process including design jig & fixtures.
• Carry out other duties as assigned by Supervisor / Manager

Requirements:

• Diploma qualification in Precision Machining or Mechanical engineering or Equivalent.
• Minimum 2 years of CNC Machine working experience in precision engineering manufacturing environment
• Basic knowledge on CNC milling programming and CNC turning programming.
• Under standard mechanical drawing, assembly and part level
• Familiar with CAM software like Mastercam & UG is an advantage
• Ability to muti-task
• Strong team player and able to work independently

• Provide technical support with focus on laboratory work scope expansion and development to achieve better efficiency and higher productivity.
• Metcal Implementation to improve the productivity.
• Performing and Managing In-house and Onsite calibrations

Specific responsibilities:

• Expand laboratory work scope for Dimensional and Mechanical fields.
  Be an approved Local Accreditation Body signatory for Dimensional and Mechanical fields of calibration in the laboratory.
• Arranging recalibration of standard equipment’s before due date through ISO/IEC 17025 accredited labs having better CMC, reviewing the certificate of master instruments and periodically updating the Master equipment’s list.
• Regularly updating the drift records of master instruments
• Reviewing and approving the calibration certificates
• Improving the delivery performance by getting the work done from the team as per plan and delivering instruments within committed TAT.
  Identify training needs and provides training for staff.
• Increase calibration productivity and efficiency by adopting improved systems and methods.
• Arranging & performing preventive maintenance, in service checks, inter laboratory Comparison (ILC) and Proficiency Testing (PT) as per planner.
• Ensure laboratory procedure are up to-date with regular review. Develops and improves calibration procedure and prepare CMC calculations.
• Assists in maintaining laboratory Quality Management Systems as per ISO 17025, To be well prepared for the internal and external audits.
• Manages laboratory technical functions in accordance with Local Accreditation Body standards.
• Provide technical support during equipment failure also providing technical guidance to the team.
• Participate in identifying new business opportunities and development.
• Assists in annual Capex budget exercise and assist with Capex justification for new or replaced equipment
• Listen and provides technical advice to client and assists in client audits
• Anticipate the clients’ needs to offer the most suitable solution.
• Operate to the highest standards of ethics, in accordance with the SGS Statement of Integrity
• Liaise with clients on technical issues when required also confirming the calibration capability to CS team for enquiries.
• Maintain draft Calibration Certificate format/template
• Maintain good housekeeping at workstation/areas by implementing and maintaining 5S activities.
• Ask for more business while interacting with customers
• Always act in a friendly and reliable manner, Act upon client feedback.
• Manage timely trouble shooting and assist customer as necessary.
• Build and foster collaboration with internal teams involved in service delivery.
• At All times, adopt a safe behavior by exercising due regard for the health and safety of SGS employees and clients, in line with SGS policies and procedures
• Perform any other responsibilities as assigned by Senior Management

Requirements:

• Degree in Mechanical engineering or related field.
• 7 -10 years’ experience in equipment measurement/calibration field.
• Technical knowledge and experience in related field and in using management methods and tools.
• Able to work independently and to coordinate several activities simultaneously
• Able to interact with all levels of management, suppliers, and clients.
• Good communication, negotiation, and interpersonal skills
• Works well under pressure, challenges status quo.
• Applies judgment and acts according to the SGS standards of ethics and integrity
• Knowledge of ISO systems and procedures
• Able to coordinate and motivate a team towards a common goal.
• Able to realize business opportunities in conformity to the business strategy.
• Acts quickly and decisively; able to make tough calls

• Reviewing work performed by team, providing guidance and training where necessary.

Specific responsibilities:

Sales/Accounts Receivable
• Review Write-off approved bad debts
• Monthly review ageing and meeting with Credit Controllers
• Monthly open and close AR period
• Maintain and modify AR setup
• Filling of AR remittance
• Review monthly UBR & WIP

Fixed assets
• Review FA additions.
• Review FA disposal / transfer.
• Review FA reconciliation.

Month end closing
• Input ad hoc journals
• Review of monthly expenses
• Review of monthly PL
• Upload HFM data and prepare HFM month end reporting
• ICBS Reporting
• Review and input K-Shuttle contract list.

Others
• Request certificate of residents from IRAS.
• Prepare MD’s & COO quarterly expenses report, due on 15th of following month
• Prepare GST quarterly submission workings
• Complete customer authorization forms
• Scanning of Inter/Intra FA Disposal forms
• Update and review balance sheet schedules
• Participate in other ad hoc FINDIV projects
• Perform staff appraisals and recruitment.

Requirements:

• Min 2 years years experience in accounting.
• Minimum Diploma in accounting.
• Knowledge and experience in Oracle, MS Office Excel
• Able to work independently
• Able to interact with all levels of internal and external clients
• Good communication, negotiation and interpersonal skills
• Works well under pressure, challenges status quo.

• Delivery and maintain client services.
• Scheduling for collection and delivery of Instruments, also for the pickup and drop of calibration officers at onsite

Specific responsibilities:

• Equipment registration, apply the Job Tag on each instrument with accessories.
• Mobilizing the Equipment’s from SMD Stores to corresponding labs upon registration and collecting it back upon completion of calibrations.
• Ensuring the condition of the instruments received and informing the customers through email if any item not received in good condition.
• Scheduling for Instruments delivery and collection with necessary documents i.e. DO, certificates, PO copy if required.
• Scheduling for driver to pick up and drop-off the calibration officers as per on site plan.
• Prepare Delivery Orders
• Packing Master Instruments under supervision of Calibration Executive.
  Whenever required need to drive company van to Collect/deliver the instruments with necessary documents.
• Do Booking in DHL for the subcontract calibrations from overseas labs.
• Scan the customer signed DO’s and save it in share drive
• Always act in a friendly and reliable manner, constantly strive to deliver outstanding services
• Act upon client feedback and ensure availability to customers.
  Implement and maintain 5S activities.
• Build and foster collaboration with internal teams involved in service delivery
• Identify, act upon and follow up client reported issues and inform the sales, operations teams as appropriate
• Exceed regular service level and provide extra-mile support
• At all times, adopt a safe behavior by exercising due regard for the health and safety of SGS employees and clients, in line with SGS policies and procedures
• At all times, comply with SGS Code of Integrity and Professional Conduct
• Operate to the highest standards of ethics, in accordance with the SGS Statement of Integrity
• Monitor deliveries and ensure customer satisfaction.
• Responsible for maintaining accurate logs of all transportation and goods.
• Perform any other responsibilities as assigned by the Management.

Requirements:

• Min ITE in Supply chain management or equivalent
  2 to 3 years of relevant work experience.
• Valid commercial driver's license (Class 3)
• Good driving record with no accidents or incidents
• Well-versed in office skill tools.
• Good physical condition and able to lift heavy packages
• Knowledge of safety regulations and traffic laws
• Must be a team player with a customer service-oriented mindset.
• Able to work independently with minimum supervision.
• Able to interact well with peers, management and clients.
• Ensure information are correct between system and equipment.
• Good communication and interpersonal skills
• Acts quickly and responsively
• Works well under pressure in a fast-paced environment.
• Applies judgment and acts according to the SGS Standards of Ethics & Integrity.

• Conduct the testing of consumer/retail, food or environmental and health samples in accordance with international standard or in-house methods.
• Assist to organize and maintain the day to day operation of the laboratory, to participate all the technical function in accordance with ISO17025 standard

SPECIFIC RESPONSIBILITIES

• Perform Chemical Laboratory testing activities such as perform testing on the bench.
• Ensure that all equipment is qualified and maintained at scheduled interval according to the procedure or method.
• Conduct regular chemical and consumables inventory checks
• Maintain good housekeeping and safe system of work.
• Applies judgment and acts according to SGS standards of ethics and integrity

REQUIREMENTS:

• Min Nitec in Biology, Chemistry or equivalent
• Added advantage to have prior experience in laboratory environment
• Able to maintain highest quality standard all the time.
• Able to maintain good turn around time (TAT) and on time delivery (OTD)
• Able to work independently and to coordinate several activities simultaneously
• Works well under pressure, challenges status quo.

• Provide administrative support to the department.
• Receiving, registration and opening of Samples
• Preparation of worksheet to be passed down with samples for Analysts to do testing
• Receive reports of post-test activities to enter data and process invoices
• Materials Order & Dispatch (sampling kits)
• General housekeeping for stores
• Filing in accordance of 5S
• Data entry for Admin Supervisor so as to process invoices
• Carry out any other Administrative work as assigned
• Upkeep the cleanliness of work areas, Store & Sample Room
• Maintain good housekeeping
• Perform any tasks as assigned by the superior

Requirements

• GCE ‘ N ‘ levels, ITE or equivalent
• Positive working attitude
• Team player and hard working
• Must be able to work independently
• Must be able to work overtime when required
• Applies judgment and acts according to the SGS standards of ethics and integrity

• Typing of inspection reports/certificates.
• Printing and recording of inspection reports/certificates.
• Data entry of clients’ details for invoicing purposes.
• Sorting of reports and ensuring that all order acknowledgement, instruction to surveyors and/or instruction for laboratory analysis are in job files prior to putting it into the file cabinets.
• Preparing of invoices for approval.
• Data entry of inspectors’ overtime records.
• Dispatching of completed reports to clients and recording the dispatched details.
• Handling of phone calls and directing enquiries to the respective personnel.
• Assist in sending of fax messages and telexes.
• Liaise with affiliates on ICC invoicing matters.
• Receive, check and confirm CBA.
• Transmit CBA for local clients.
• Process inter- Affiliate invoices for payment/settlement.
• Co-ordinate with affiliate on invoice query.
• Liaise with finance dept on status of payment.
• Investigate problem invoices and report back to clients.
• Perform any other tasks when required from time to time.

Requirements:

• Min ‘O’ Level
• Proficient in Microsoft Office
• Able to coordinate and be a team member towards a common goal
• Able to work independently and to coordinate several activities simultaneously
• Able to interact with all levels of management, affiliates, suppliers and clients
• Applies judgment and acts according to the SGS standards of ethics and integrity
• Knowledge of ISO systems and procedures

Responsibilities

• Understand/develop technical design specification/requirements and associated document relevant to project.
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and system commissioning on site.
• Produce test document and training material.
• Conduct training to customer
• Provide technical support to sales and maintenance team

Requirement

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering.
• Knowledge of PLC is needed
• Ideally with 2 or more years of DCS/PLC/SCADA programming experience
• Ability to read electrical/P&ID schematics
• Able to work in a collaborative team environment
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

Key Responsibilities / Accountabilities

• Identify best practices and lead continuous improvement initiatives to reduce work process risks, raise safety awareness, and improve safe work practices
• Facilitate a work environment that supports a safe and healthy culture.
• Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment
• Conduct internal audits for ISO, EMS, OHSAS and Health& Safety audits and inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance
• Investigate industrial accidents, near-miss incidents, and occupational injuries to determine causes, install preventive measures, and manage return-to-work activities
• You are required to report work-related accident to MOM and HR, follow up with MOM if there’s any investigation required or any further action
• Follow up medical report form to the hospital or clinic and completed medical report sent to MOM
• Provide technical advice, coaching, guidance, and mentoring to employees on safety initiatives and necessary changes
• Coordinate employee safety programs to determine their adequacy including review of short- and long-term strategic safety planning and development
• Take part and lead in the Risk Assessment development
• Order and maintain facility safety inventory including supplies and equipment
• Work within company policy as outlined in HR Policy Manual and OSHA Safety rules and regulations where applicable
• Coordinate and conduct management review for all the three compliance standards at predetermine frequency
• Focus on continual improvements to enhance further compliance standards performance

Control Engineer

Main Responsibilities

• Responsible to assist in the design of controls system and programming to meet the budget and time expectations of the project.
• Able to Modify controls design and other documents according to the Standards and compliance to industry standards as according to project specification.
• Develop specific program per customer and project requirements.
• Knowledge in Allen Bradley, COMAP and Siemens-S7 programming.
• Knowledge in instruments, control valves and shutdown valves troubleshooting.
• Knowledge in various industrial communication protocols like MODBUS, Ethernet etc.
• Knowledge in control panel design as per project requirement.
• Participate in controls and validation activities, conduct test and debug, FAT and SAT.
• Work together with the Customer, Process engineer, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Ability to communicate in an open, clear, precise and effective manner.

Requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent;
• Minimum 3 years of related work experience in oil and gas industry.
• Must be able to travel as requested.
• Must be available to work overtime.
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment.
• Well organized and respectful of project deadlines.
• Positive attitude.
• Target and result orientation.

Summary

Initiates the design, development, execution and implementation of technology research projects. Investigates the feasibility of applying scientific principles and concepts to potential inventions and products. Plans and executes applied research. Maintains substantial knowledge of state-of-the-art principles and theories and may contribute to scientific literature and conferences. May participate in development of patent applications. May coordinate interdepartmental activities and research efforts.

Key Accountabilities

• Evaluation of value engineering efforts on current products and achieving strategic quality goals following the launch of new developments (NPIs) and existing products.
• Work with the team to drive business stakeholders’ priorities participating in plans to successfully support all active products in the areas of cost reduction, supply chain support, and participate in design for in-sourcing projects. with key technologies.
• Provide evaluation results (verification and validation), to ensure proper performance, long-term stability, reliability, robustness, and customer-usability for Value Engineering projects on all PerkinElmer products (include Mass Spectroscopy, ICP OES and GC products).
• Log and track all defects, test results.

Requirements

• Bachelor of Science degree or equivalent required.
• 2-5 years analytical instrumentation experience.
• Statistical analysis capabilities a plus.
• Excellent verbal and written communication skills; requires interaction with managers, supervisors, engineers in a fast-paced environment.
• Demonstrated ability to succeed in a fast-paced environment, working on multiple projects with constantly changing priorities and deadlines.
• Self-starter with the ability to prioritize, multi-task, and take ownership of projects, performing job requirements with minimal oversight and attention to detail.
• Positive attitude, high energy and troubleshooting skills.
• Fully responsible for significant/challenging deliverables keeping management informed of progress and strategy.

The Quality Manager is responsible for ensuring the consistent delivery of quality service and products, regularly engaging in systemic and process reviews for continuous improvement. He/She will lead a team of QC/ QA personnel to work with Production, Sales & Operation teams to ensure and provide training for meeting strict quality and food safety compliance. The incumbent must have relevant work experience in food manufacturing and a track record in change leadership and quality management.

• Candidate must possess at least Advanced/Higher/Graduate Diploma, Bachelor's Degree, or Professional Degree in Food Science & Technology and/or Business Administration & Management
• At least 10 years of continuous work experience in a similar position in food manufacturing, with at least 5 years in quality management functions, is required.
• Only professionals with experience in Food Manufacturing and Quality Assurance or equivalent in a fast-paced, high mix/ high volume, BRCGS or ISO22000 food safety management system need to apply.

Full-Time position

Essential Duties and Responsibilities:

• Liaise with internal & external on control design and process flow. Implementation of SCADA/PLC/DCS projects from concept to design, configuration & programming, testing and commissioning for process plants.
• Troubleshoot electrical design and software issues together with assembly/debug team.
• Lead and provide coaching, supervise, make sound decisions and guide to Control Engineer and electrical team.
• Working knowledge of Ethernet, Profinet, ProfibusDP ,Profibus PA, Modbus communication
• Hands on experience but not limit on SIEMENS, OMRON, ALLEN BRADLEY PLC & WINCC HMI or other SCADA systems is essential.
• Oversee the preparation of project documentation for new and refurbish projects.
• Able to carry out testing & commissioning at project site independently locally as well overseas.
• Arrange resources to support project and service team to meet the required timeline
• Occasionally travel local & oversea is required
• Assist and arrange support on IT,OT, IQ,OQ, PQ for new project
• Other duties as assigned by the Management

Education and/or Work Experience Requirements:

• Minimum Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic), Engineering (Computer/Telecommunication) or equivalent
• At least 5 year(s) of working experience in the related field is required for this position
• Must have knowledge in computer systems, and high-level knowledge of software applications on PLC’s, vision control system with preferable experience in integrated manufacturing systems
• Must have high level knowledge of Industrial Networks architectures (Ethernet IP, Control Net & Profibus)
• Experience of working on an MES system will be a bonus
• Knowledge of machine control systems
• Good inter personal skills.
• Detail-oriented for understanding complex systems and the ability to pay attention to details, as a minor error can result in major problems.
• Ability to function in a fast-paced work environment
• Well organized and respectful of project deadlines
• Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management
• Have good knowledge of industry accepted good automated manufacturing practices (GAMP) and validation process (is an advantage)
• Organizational skills for keeping track of project budgets, employees and schedules simultaneously.
• Can speak and write in English

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hour: Monday - Friday (7.50am - 4.55pm)
• Location: Joo Koon

Job Scope:

• Plan, supervise, and execute projects and tasks
• Address and prevent issues to enhance customer satisfaction regarding product quality
• Maintain quality, environmental, and water efficiency systems within the company
• Assist in the maintenance and compliance of ISO 9001, ISO 14001, IATF 16949, ISO 17025, ISO 13485, and ISO 46001 standards
• Understand the company's policies and objectives related to quality, environment, water efficiency, and occupational health and safety (OH&S), as well as environmental aspects, safety risk assessments, and information security risks
• Conduct internal Quality and Environmental Management System (QEMS and WEMS) audits and coordinate external audits
• Monitor quality failure costs in the production department
• Perform calibration and maintenance of x-ray machines, ensure cleanliness in the x-ray equipment area, and update monthly schedules for x-ray machine maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Description

► Monday to Friday

► Office Location - East

► Basic up to $2800 + VB

Job Responsibilities

• Conduct daily stock checks of products and report findings to inventory control supervisor
• Coordinate and follow up with Retail Operation to resolve inventory issues
• Assist in validating count results of cycle counts / stock take
• Maintain and updating of records

Job Requirements

• Minimum Diploma in Logistics
• Minimum 1 years of relevant experiencs

For consideration, kindly submit your CV by clicking “APPLY NOW”

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R1326597 | Oh Jia Qi Doreen

Job Description

• Assists Assistant Section Manager with the daily NDT Inspection activities and manpower deployment
• Reviews technical specifications, drawings, procedures, and standards required in the project
• Reviews and checks the project NDT plan and procedures submitted by NDT Assistant Engineer/ Engineer
• Monitors the project schedule for NDT activities
• Reviews and monitors NDT contractors' technicians’ list, equipment calibration list, and their NDT reports before submission to project clients
• Performs dressings, electrocardiograms, and other minor procedures
• Liaises with QA Engineers on the NDT work scope, requirements, and progress
• Ensures there is proper documentation of project inspection and test activities
• Initiates recommendations and provides solutions to project problems through designated channels
• Performs internal audits on project documents and inspection activities
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Job Requirements

• Degree/ Diploma in Naval Architecture/ Civil/ Marine and Offshore Engineering/ Mechanical Engineering
• At least 3 years of relevant Quality Assurance working in Radiography and Ultrasonic Flaw Detection Test, preferably in the offshore and marine industry
• Possess a positive and willing-to-learn attitude

1. Perform analytical equipment lifecycle management as per current regulatory requirements / SOP.
2. Involve in equipment qualification, writing URS, reporting and implementing SOP’s for system operation and maintenance, monitoring performance of the equipment and decommissioning of equipment.
3. Support and / or perform maintenance / calibration of laboratory equipment in compliance with established schedules.
4. Liaise with vendors/service providers for PM / Calibration in a timely manner.
5. Responsible for maintenance / calibration planning of equipment within QC Department.
6. Ensure real time documentation, maintain data integrity and appropriate traceability.
7. Responsible for the accurate, timely and compliant execution of assigned projects and related documentation.
8. Assist / perform method validation and transfer as required.
9. Conduct QC Department equipment operation and maintenance training to QC staff as required.
10. Perform and / or support in maintaining the asset register for equipment in the QC Department.
11. Initiate CAPEX for equipment purchase.
12. Responsible for QC lab and equipment/instrument cleanliness.
13. Any other activities as and when assigned by the Superior.

EDUCATION & EXPERIENCE

EDUCATION: Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering, Biotechnology).

EXPERIENCE: Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.

KNOWLEDGE & SKILLS

1. Possess working knowledge of GMP in the pharmaceutical industry.
2. A good team player with positive learning attitude.
3. Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
4. Excellent interpersonal and analytical skills, good verbal and written communication skills.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description & Requirements

Able to operate CNC CMM machine with 2 years experience needed is a priority.

Knowledge in QC equipments, example: Height Gauge, Smart Scope, Veriner caliper etc.

With computor knowledge to provide QC report and handle NCR.

Must have knowledge in drawing specification. Example: Tolerance, Surface Treat, Heat Treat etc.

Basic knowledge in machining process.

Dear all

One of our Oil and gas Industry client is looking for their workshop as a Quality Engineer. Person education should be in Bachelor Degree with min 5 years of relevant working Experience

Responsibilities:

• Monitor operations to ensure that they meet production standards.
• Recommend adjustments to the assembly or production process.
• Inspect, test, or measure materials.
• Measure products with calipers, gauges, or micrometers.
• process control, control charts, acceptance sampling, and product quality control
• Must know about the CNC machines, and knowledge in Programming.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

About Us:

JSTT Singapore Pte Ltd is a leading producer of high-quality sushi and sashimi, providing fresh and delicious products to supermarket counters across [specific regions]. Committed to excellence, we are seeking a skilled and dedicated professional to join our team as a Food Safety and Quality Assurance Officer.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 and FSSC regulations in our central kitchen and 20 supermarket counters. Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000 and FSSC standards.
• Conduct regular audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and recalls.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000 / FSSC standards.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.