• To conduct QC inspection and record on all the incoming materials.
• To attend to any complaint from sites.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• To prepare all the Quality-related reports.
• Any other duties instructed by the Manager.

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection Eligibility Criteria
• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Main duties and responsibilities:

To support the local team in all QEHS related compliance and performance of TES Singapore sites, which includes but not limited to emergency response (drills and TTX), incident investigation and IH monitoring, etc. Also, includes all Environmental related matters and regulatory reporting, global QEHS procedures & programs and overall lead for all QEHSMS / R2 audits, 3rd party certifications and customer audits as well as supporting Group EHS.

Environment:

• Reporting of QEHS performance metric reporting and activities to Global/ Group EHS Manager.
• Provide guidance on QEHS best practice principles, techniques and culture in Singapore sites.
• Compilation and submission of annual recycling data and other relating environment related info to relevant competent authorities.
• Maintain Basel Permit / Import Approval of all sites, including applications and tracking of movement documents.

Audit:

• Ensure Singapore sites are aware of and complying with Corporate/ Group QEHS policies, standards and programs, and local legislations.
• Program lead for 3rd party (ie. QEHSMS & R2) audits and key customer accounts on QEHS audits, provide resource and preparing Singapore sites with upcoming audits, tracking & reporting of audit results and monitor closure of corrective actions.
• Develop and conduct Singapore sites QEHS Audit program to ensure compliance to EHS regulations and Global EHS standards. Track & report audit results and monitor closure of corrective actions.
• Analyse data from EHS audits (including 3rd party QEHSMS & R2 certification audits and key account QEHS audits) to identify trends and provide feedback and preventative measures.

Other support:

• Support the development & implementation of One TES IMS – global QEHS procedures and programs.
• Monthly tabulation and submission of Basel permits status reporting for Exco meeting.
• Provide coordination and administrative support to QEHSMS & R2 certification program in Singapore.
• Support global initiative programs / activities as assigned.

Job Requirements:

• Diploma / Degree in any Engineering discipline and registered WSHO and FSM.
• Good to have: Qualified industrial first aider, noise monitoring office or any other IH related experience.
• Proficient in English and Mandarin and good report writing skills, familiar with Microsoft office.
• Trained in/ familiar with ISO 14001, ISO 45001, ISO 9001 and Responsible Recycling (R2) or equivalent.
• Experience with handling government agencies and knowledge in license and permit application from agencies such as NEA, MOM, SCDF, PUB and SPF.
• 5-8 years of working experience as in WSH related fields or equivalent in manufacturing / electronic or chemical industries.
• Experience in conducting ISO 9001/ ISO 14001/ ISO 45001/ R2 audits or handling OSH related audits.
• Good communication skills, team player, responsible, take initiatives and work independently without much supervision.

Good to have:

• Registered WSHO & FSM.
• Proficient in English, Mandarin and good report writing skills, familiar with Microsoft office with auditing experience in ISO 14001, ISO 45001 or ISO 9001.
• At least 5-8 years of working experiences as in WSH related fields or equivalent in manufacturing/ electronic or chemical industries.
• Good leadership skills to be able to guide and lead a team of EHS professionals.

Job Responsibilities:

1. Ensure quality management system effectively implemented and continuously improvement. Effectively execute internal audit and management review, and follow up with the corrective action after audit.
2. Monitor effectively to all system procedures; monitor the progress of company KPI target and current performance.
3. Quality training of internal auditor.
4. Ensure to pass the external (2nd and 3rd party) audit.
5. Handle customer complaints and quality related queries.
6. Implement customer requirement, carry out product quality plan for all projects and ensure PQP effectiveness.
7. Implement quality tools in production to support corrective and preventive actions and continuous improvement.
8. Part and line approval follow up (Q-package) in the whole project.

Job Requirements:

• College degree of Science/ Engineering or equivalent knowledge with 2+ years' experience in quality control including 1+ years’ experience in customer quality management, QMS and ISO Certification Audits.
• At least 1-year of quality engineer’s experience in incoming, manufacturing and customer service area.
• Strong leadership and result-driven / goal-oriented.
• Knowledge of quality system management standards, such as ISO 9001, IATF 16949, ISO 13485, ISO 14001 and ISO 45001.
• Be familiar with quality tools.
• Be familiar with the knowledge of IATF 16949 standard and 5 Tools(PPAP/APQP/SPC/MSA/FMEA).
• Knowledge of six sigma is preferred.
• Good IT skill-MS office/Minitab.
• Communication and presentation skill.

• 12-month contract (convertible) with completion bonus
• Hybrid
• With SAP experience added advantage

Job Responsibilities:

• Communicate with customers to solve collection issues and gain payment commitments, while building rapport and a positive relationship with global strategic account.
• Check stopped orders report on a daily basis for the assigned region and/or product line. Review the overdue status and risk development of the customer before releasing the order.
• Conduct customer review of the new and existing customers and recommend credit lines according to the global credit policy.
• Work with cash applications team and customer service team to research and resolve short payments/non-payment disputes.
• Attend periodic collection meeting and coordinate closely with regional finance and commercial team to address any escalated collection matter.
• Inform manager of potential problems in the credit review process or collection process and make recommendations for process improvement.
• Perform AR reporting on overdue balances and top accounts as per request from business units.
• Perform other duties and responsibilities as assigned.
• Perform intercompany confirmation at month-end closing.
• Perform other duties and responsibilities as assigned.

• Diploma/Degree in any field
• Min 1 years related commercial collections experience
• Proficient in V-lookup
• Demonstrate clear understanding of basic accounting principles, general ledger, credit practices and collection procedures
• Experience with ERP system - SAP is a plus

Kindly note that only shortlisted candidates will be notified.

Triton AI Pte Ltd

Registration Number: R23118389

EA: 21C0661

• Completion bonus
• Chances to convert/ renew depending on company headcount
• Hybrid

Job Description & Requirements

• We look for technicians who can handle various GPS installation and customer management
• Electrical background with installation of various electrical and electronics items
• Experience in installation of GPS Devices in various vehicles
• Hands on experience in technical know-how of Teltonica devices and firmware
• Exposure to EV vehicles and their electrical diagrams
• Installation knowledge on CCTV / Door access devices etc
• Experience in Solar devices is a plus
• Provide Desktop support to users
• Knowledge in Phone systems, Server management is a Mandatory.

Job Responsibilities:

Responsible to lead the team on Piping & Layout design activities.

• Coordinate on project specific issues with the Piping Design Lead.

• Based on the client specifications, follow project specific procedure related to Piping & Layout design.

• Work closely with the Piping design lead of the project to understand the requirements and address the demand on time. Develop reports as required by the lead.

• In case of any technical challenges, troubleshoot to resolve the issues on time and if required escalate to Piping Design Lead for quick resolution. Plan tasks and issue the deliverables as per company procedures.

• Be familiar with the workflows in the project once they have been set up. Taking initiative and provide any input to the Piping Design Lead on time and highlight in advance if there are any technical challenges.

• Coordinate actively with other offices, for the projects being executed from multiple locations, attend meetings, and communicate effectively. Be flexible and ready to assume additional roles in the project.

• Perform 3D-modeling using E3D / PDMS for Mechanical, Safety, Soft Volumes, Escape & Transport Routes, Access & Material Handling Routes, Equipment modelling, Package modelling with required TP points, Piping and Pipe supports.

• Perform FPSO layout design which includes Turret, Hull and Marine Piping/ Pipe support design. Conduct 3D Model Reviews both internally and externally as per the Project requirements.

• MTO preparation and checking for the Piping Bulk items and Tagged Items.

• Vendor drawing review for the static Equipment’s/ Rotating Equipment’s/ Packages and ensure all the Nozzle orientations; Vessel cleats Support requirements are in line with Design Requirements.

• Perform and Checks the Model object clashes on regular basis and collaborate with other disciplines for effective cleaning of the 3D Model to make it clash free.

• Perform Design Review on regular basis by using E3D / PDMS / 3D model software such as Navisworks for establishing the suitability of Layout / Piping design in accordance with standards and codes.

• Issue of discipline deliverables in project specific templates.

Job Requirements:

Work Experience:

• Must have minimum of 10-12 years of experience having worked in an engineering setup for upstream oil & gas projects (Offshore & FPSO projects) serving in the capacity of a Piping Lead Designer.

• Must have experience is using E3D / PDMS, MDS, Navisworks, Autocad and MS Office

• Experience in Norwegian projects and applicants experience to the relevant standards, NCS.

Responsibilities:

Reporting to QA/QC Manager

Implement and maintain the Quality Management Systems(ISO9001-2015, ISO14001-2015, AS9100, ISO45001(OSHA), Nadcap)

Manage the Internal and External Audits.

Review specifications and requirements,

Collaborate with Manufacturing Team to develop and implement controls and improvements.

Ensure that workflows, processes, and products comply with Quality and safety regulations.

Investigating and troubleshooting Quality or production issues.

Identify Root Causes of problems; implements and monitor effectiveness of corrective/Preventive measures.

Monitor and analyze quality performance(KPI) to identify trends in product quality or defects with the goal of mitigating and preventing recurrence and future defects.

Performs any other duty as assigned by the management.

Requirements:

Diploma in Quality or Mechanical engineering.

2+ years of experience in quality engineering, quality assurance, or a similar role.

Hands-on experience with Quality Management Systems (QMS), inspection and testing methodologies.

Experience in QA/QC function, ability to read Technical Drawing and use of measuring instrument

Strong communication and interpersonal skills.

Strong analytical and problem-solving skills.

Excellent verbal and written communication skills.

Excellent organizational skills and attention to details.

Extensive knowledge of or the ability to quickly learn the organizations production processes.

Excellent interpersonal skills with ability to serve as a liaison with customers, suppliers and internal team members.

Proficient with Microsoft Office Suite or related software.

Certified Auditor is an added advantage.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Key Responsibilities:

• Track the quality of parts and products in the field
• Maintaining quality records
• Trending and highlighting quality of parts and products for corrective actions.
• Follow up on quality matters till final disposition.
• Conduct meeting with related departments and vendors
• Documentation of inspection processes
• Training and developing Technicians and Vendors
• Investigation of failures in the field and propose solution
• Comply with the EHS procedures
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Minimum Diploma / Degree in Mechanical, Manufacturing and Precision Engineering
• At least 5 years’ experience in Quality control and/or related work
• At least 2 years’ experience in ISO9001/ISO45001 related quality system and in use of the quality tools

The ideal candidate should have:

• Strong Interpersonal Skills
• Possess Ability to Communicate
• Must possess upmost integrity
• Must be meticulous and thorough
• Good quality mindset.
• Good analytical skill and possess initiatives.
• Singaporeans only

Responsibilities

• Ensure compliance and effectiveness of standards;
• Ensure verification of raw material and packaging material specification;
• Carry out analysis of products, testings and r&d;
• Maintains HACCP/ISO/FSC22000 system, document and process control;
• Liaising and facilitating auditing (Internal/External);
• Contribute to continuous improvement;
• Ensure quality by analyse yield report, develop quality assurance framework and manage non-compliance quality cases; and
• Any other ad-hoc duties/tasks as assigned by superior

Requirements:

• At least a Diploma in Food Science/food related/food process;
• Knowledge in HACCP, ISO, FSC2200 and Food Safety auditing is preferred;
• Good communication skills - both written and verbal;
• Good analytical skill and detail-oriented;
• Meticulous, organised and self-starter;
• Person of high integrity and good interpersonal skill;
• Able to work independently and as well as a team; and
• Bilingual. (To liaise clients with in other languages)

Working Hours: Mon-Fri, 8.00AM - 6.00PM.

Working Location: West, near SPH.

Transportation into company at: Lakeside MRT from Mon to Sat.

Lunch provided.

To apply, please kindly email your updated resume by clicking Apply Now or call us at 6265 9911 or whatapp us at 8853 8985 for more information.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities/considerations.

• Perm
• Must have at least 5 years of BD/sales experience in Oil & Gas, Bunker fuels or selling to shipowners/ship managers
• Proven track record in building business
• Comfortable to be a sole contributor
• Advantageous if incumbent possess technical experience and is familiar with the bunker industry

Job Description

• Grow the sales of the global business in line with the strategic growth plan of the business working to budget targets
• Manage key accounts in designated geographical regions
• Identify and develop new opportunities to expand the services offered by the company
• Prepare quotations and tenders for new business opportunities.
• Develop working relationships with decision makers for all managed accounts and potential accounts
• Maintain up-to-date knowledge of the company's service offerings as well as external market trends
• Manage and maintain a pipeline; ensuring all sales information is current
• Gain a greater understanding of our customers’ business activities and the demands, constraints and factors affecting their business and markets
• Gain information on competitive activity and market factors which could affect the company's overall business
• Attend industry relevant conferences and exhibitions
• Assist with marketing activities
• Maintenance of I-Connect CRM database
• Liaise with local service providers when required to ensure high standards of service delivery are maintained

• Min Degree
• At least 5 years of BD/sales experience in Oil & Gas, Bunker fuels or selling to shipowners/ship managers
• Proven track record in building business/growing sales
• Excellent verbal and communication skills to liaise with internal and external customer’s
• Ability to develop strong working relationships with clients and internal stakeholders
• Knowledge of Petroleum Products and their properties
• Knowledge of Marine Industry operations and relevant legislation
• Knowledge of all competitive testing companies

Perm

AWS

Bouns

Medical and Insurance Coverage

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

Job Responsibilities

• Create, or find and evaluate, better and more efficient ways to manufacture products, which involves techniques, processes, and procedures.
• Continuous improvement of product quality through leaner concepts and activities.
• Your success requires a broad knowledge of equipment and tools and the ability to effect change through influence.
• A Manufacturing Engineer works often hands-on, interacting with production personnel and with engineering and manufacturing groups to ensure lean plans are created and implemented.
• Design new Lean Six Sigma concepts or evaluate and implement existing concepts and best-in-class manufacturing techniques.
• Incorporate engineering specifications into design, process, or techniques and provide feedback to capture lessons learned.
• Create, implement, and monitor key performance indicators and metrics.
• Improve manufacturing process cost.
• Ensure solutions achieve required quality levels, reliability, and consistency.
• Coordinate investigations to address deviations and non-conformances, working with relevant subject matter experts as needed to ensure corrective and preventive actions are completed and address root causes.
• Develop, implement and maintain relevant quality procedures in compliance with the Quality Management System (QMS) and client requirements as needed.
• Ensure compliance to internal and external management systems.
• Conduct audit processes internally and at suppliers, including planning, preparation, execution, reporting results, and remedial work plans.
• Develop and implement internal Quality Control Plans (QCP) including customer- and project specific QCPs. Participate in design reviews and criticality assessments of processes as input to QCP development.
• Verify and ensure quality requirements are met before release of product for shipment
• Contribute to Quality Improvement Plans internally and with suppliers.

Job Requirements

• Bachelor’s in industrial, mechanical, or electrical engineering with minimum 1 to 3 of relevant experience
• Good to have relevant combined manufacturing engineering and quality function experience
• Relevant experience in Oil & Gas industry will clearly be a plus
• Experience in handling failure investigations and ISO and API audits will be beneficial
• Familiar with CNC machines, leading process improvements, handling capex projects
• Understanding of lean six sigma methodologies will be beneficial

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Participate and contribute in Production Readiness Reviews
• Perform Product audits in accordance to applicable Definition Files and Manufacturing Inspection Files
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product nonconformity.
• Validate the qualification of new test equipment.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Experienced in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Experienced in Quality Auditing
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

Job Description & Requirements

Our Quality group ensures every single material inside our products is manufactured, processed, tested, packaged, stored and distributed aligned with our incredibly high standards of quality and meets all regulatory requirements. Partnering across our internal manufacturing facilities, external contract manufacturers and suppliers we create an interdependent global manufacturing network committed to deliver a compliant, reliable supply to customers and patients on time, every time, across the globe.

What will you do

• Responsible for planning, scheduling and performing calibration, maintenance and qualification of laboratory equipment.
• Responsible for maintaining laboratory chemicals and consumables inventories and disposals.
• Responsible for archival/retrieval of retention samples.
• Ensure laboratory equipment calibration, maintenance and qualification within timely manner and in compliance to standard operating procedures with necessary laboratory safety precautions.
• Liaise and coordinate with external service providers in carrying out calibration, maintenance and qualification of laboratory equipment and tools.
• Liaise with external vendors to ensure chemicals and consumables supply continuity.
• Support laboratory investigation on laboratory equipment failure, Out of Tolerance and Out of Specification
• Be the subject matter expert of laboratory maintenance and participate as auditee in site internal audit/external audit.
• Coordinate with laboratory team to ensure equipment availability for calibration, maintenance and troubleshooting work.
• Manage archival/retrieval of record for laboratory calibration, maintenance and qualification related documents.
• Understand customer needs and identifies solutions to non-standard requests by interpreting existing procedures, processes and practices.
• Ensure work and behave in accordance with EHS procedures and guidelines.
• Maintains positive working relationships among employees and fosters an environment where employee engagement, empowerment, teamwork and accountability are the cultural norm.
• Participate in continuous improvement initiative as part of the production system culture in Singapore.
• Participate in EHS, Business Compliance, cGMP and all other compliance-related matters, where applicable.
• Uses formal data based analytical tools (such as Lean Six Sigma process) to identify and implement operating improvement opportunities to eliminate waste, improving accuracy, compliance and productivity.
• Any other duties as assigned by the Senior Manager/Director.

What you must have

To be successful in this role, you will have:

QUALIFICATION:

Bachelor Degree in Science/ Life Science, Pharmacy, Pharmaceutical Science or Engineering or proven relevant experience.

EXPERIENCE:

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria:

• Singaporeans/Singapore PRs only
• PMETs/Mid-Careerist with no prior work experience in Biopharma industry are welcomed to apply
• Open to two years contract
• Minimum 2 years of relevant experience in GMP manufacturing environment, preferably laboratory operations.

QUALIFICATION:

Bachelor Degree in Science/ Life Science, Pharmacy, Pharmaceutical Science or Engineering or proven relevant experience.

Expertise, Professional and Functional Competencies

· A continued improvement mindset.

· Good knowledge and understanding of GMP

· To be familiar with simple statistic to apply statistical analysis and process control techniques.

· Experience in MS-office applications.

· Proficient in English.

Other Personal Attributes:

· Good organization and time management skills.

· Able to work independently.

· Meticulous with high integrity.

· Good interpersonal and communication skills, with ability to work in cross-functional teams.

· Continuous improvement mindset.

· Positive attitude and self-motivated.

Job Description:

- Perform evaluation on new supplier who are supplying parts and ensuring part is consistently meeting specification requirement.

- Perform audit on Reliability Characteristic Item/ Safety Characteristic Item suppliers audit to ensure that quality standards comply with drawing, customer requirements and regulatory standards.

- Perform on site supplier visits to resolve incoming, outgoing process and warranty quality issues and non-conformances. Follow up with supplier on CAPA and perform effectiveness review.

- Establish yearly audit plan and perform audit accordingly.

- Engage suppliers on quality improvement initiatives.

- Maintain and update LMS and contract approved vendor list.

- Review and manage supplier performance metrics (KPIs) for continuous improvement.

Job Requirement

- Degree or Diploma in a relevant Engineering discipline or equivalent applicable experience

- Possess Class 3 driving license

- Min. 2 years industrial experience in quality assurance field

- Knowledge of military vehicles will be an advantage

At AIA we’ve started an exciting movement to create a healthier, more sustainable future for everyone.

It’s about finding new ways to not only better people's lives, but to better the communities and environments we live in. Encompassing our ambition of helping a billion people live Healthier, Longer, Better Lives by 2030.

And to get there, we need ambitious people who believe in playing an important part in shaping that future. People seeking unmatched career and personal growth opportunities, who are driven to work with, and learn from some of the most inspiring and supportive leaders in the business.

Sound like you? Then read on.

About the Role

- Support Head, Customer Service in driving digital transformation and self-help tools at service touch points in Singapore and OSS Contact Centre with - Compliance and Operational Risk in mind.

- Responsible for designing “as if” and “to be” in customer experience journey on transformation tools.

- Collaborate with internal/external stakeholders and spearhead in implementing digitalization and self-help capabilities to achieve Corporate Solutions’ goals and vision in Joyous CX.

- Drive e-portals utilization rate, focus on accuracy and quality of contents and increase customer satisfaction ratings.

- Develop and implement customer centric strategies and framework to deliver consistent high standard and quality service to our customers and business partners.

- Support investigation of complainants escalated to Customer Service section and communicate investigation findings/outcome to complainant/business partners within the required turnaround time.

- Attend to enquiries/feedback received at the various customer service touch points.

-Use of data to identify and recommend any process/operational enhancements or new service propositions to improve customer service and experience.

- Support Section Head in implementing and maintaining a centralized knowledge library as source for future omnichannel servicing portal.

- Performs other responsibilities and duties periodically assigned by Section Head in order to meet operational and/or other requirements.

Build a career with us as we help our customers and the community live Healthier, Longer, Better Lives.

You must provide all requested information, including Personal Data, to be considered for this career opportunity. Failure to provide such information may influence the processing and outcome of your application. You are responsible for ensuring that the information you submit is accurate and up-to-date.

• Ensure all packing workers are performed their jobs according to the written work instruction.
• To place packaging materials from the store by based on the packing plan.
• Verify and monitor the work done by Group Leaders and Inspectors.
• To handle and follow up on the problems forwarded by Group Leaders.
• Checked and reviewed all checklist and reports by Group Leader and below by timely basis.
• Assist final packing area.
• To provide on the job training to the Packers, Inspectors, Group Leaders other support operators.
• To ensure packing procedure and packing method are implemented and practiced.
• Ensure storage, packaging, online and final packing area are clean and tidy at all times.
• Ensure the product is stored, labeled and segregated at designated area.
• Ensure worker is handle products in correct manner and not causing any damage or contamination onto the products.
• Inform to Executive/Engineer or Manager for any equipment need to be repair, service or calibrate.
• To conduct appraisal for the worker during probationer period.
• Any other task that may be assigned.
• Help packing at warehouse.

Must have experience in oil & gas components

Familiar in all kind of measuring instruments include CMM

Threading knowledge is Mandatory(ACME, BUTTRESS, IF CONNECTION)

Problem solving skill & commuicate with customer

Must attend API auditing, resolve NCR issues raised by customer and raise NCR internally.

Maintain API & ISO documents.

Must prepare COC and fulfill customer requirements

Acceo Pte Ltd, a renowned provider of valves and fluid control products, is seeking a driven and experienced Sales Engineer to join our team. As a Sales Engineer at Acceo Pte Ltd, you will be responsible for promoting and selling our range of valves and fluid control products to clients in various industries.

In this role, you will identify potential customers, establish strong relationships, and provide technical support to meet their fluid control needs. You will collaborate with the sales team to develop sales strategies, prepare proposals, and negotiate contracts. Additionally, you will stay updated with industry trends and market conditions to provide valuable insights to both internal and external stakeholders.

The ideal candidate for this position is a results-oriented professional with a proven track record in sales within the valves and fluid control industry. You should have a strong technical background in mechanical engineering and a deep understanding of different types of valves and their applications in various industries. Excellent communication and negotiation skills, coupled with a customer-centric mindset, are essential for this role.

Responsibilities

• Promote and sell valves and fluid control products to clients in various industries.
• Identify potential customers and establish strong relationships to drive business growth.
• Provide technical support and assistance to clients, understanding their fluid control needs and recommending suitable products.
• Collaborate with the sales team to develop and implement sales strategies.
• Prepare and deliver technical presentations and proposals to customers.
• Negotiate contracts and ensure timely delivery of products.
• Track market trends, competitor activities, and customer feedback to provide valuable insights to internal stakeholders.

• Bachelor's degree in Mechanical Engineering or a related field.
• Proven experience in sales within the valves and fluid control industry.
• Strong knowledge of different types of valves and their applications.
• Excellent communication and negotiation skills.
• Customer-centric mindset and ability to build and maintain strong relationships.
• Understanding of market trends and competitor activities.
• Ability to work independently and as part of a team.
• Proficiency in sales software and tools.
• Willingness to travel to meet clients and attend industry events.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

• Material Control Technician II

  At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

  As a Material Control Technician II supporting ASM Supply Chain Department, you will be trusted to work on to Warehouse Shipping and Receiving at Tuas. In this role, a typical day will include:

Execute inbound and outbound material control tasks, inbound and outbound material logistic tasks, ERP transactions, continuous improvement, HSE tasks, administrative tasks, ad-hoc tasks as assigned by supervisor

Meet expected standards and timeline as communicated by supervisor.

Execute material control tasks with required ERP transactions:

• Inbound material receipts
• Accurate, timely work order material issue to production staging areas
• Put away materials and production returns
• Transfer of finished goods to external warehouse
• Disposal of obsolete materials
• Routine cycle count, investigate discrepancies.

Execute material logistic tasks with required ERP transactions:

• Transfer of inbound materials
• Monitor inbound material logistics estimated time of arrival (ETA) to site, escalate delays to planned ETAs
• Plan and execute outbound materials logistics.

Others tasks:

• Warehouse housekeeping, 5S activities, self-inspection tasks, consumables stock take and issue PO to replenish
• Work in manner to ensure Health, Safety, Environment, ensure movement and storage of hazardous materials in compliance with safety requirements, prepare safety risk management plan in collaboration with HSE for supervisor review and approval.
• Continuous improvement projects
• Administrative duties

Alcon Careers

See your impact at alcon.com/careers

• Responsible for the formulation of maintenance strategies and short term/long term planning for Control Systems expansion, upgrading and renewal.
• Gatekeeper for system architecture and engineering standards for all process Control Systems which are installed onsite (JI plant) or offsite (at customers' site); ensuring implementation of modification works according to these requirements.
• Lead the team to perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Provide response to 24-hour emergency call-out and night-shift support during plant shutdown, startup, and as requested by Operation Team.
• Manage the team and work closely with the E&I, Technical Service, Reliability and Operation Teams to troubleshoot and resolve problems.
• Lead the team to plan and execute preventive and corrective maintenance works for plant turnaround.
• Provide resouce and work with the Regional Project Team to review requirements and/or specifications of Control System for ongoing projects; may need to attend FAT, SAT, MC walkdown and PSSR.

Job Requirements

• Degree in Electronics/Electrical Engineering, major in Process Control and Instrumentation is preferred.
• Minimum 10 years experience working and maintaining Process Control systems, especially Honeywell DCS, Siemens PCS7 and Triconex PLC in refinery or petrochemical industry.
• Familiar with the engineering tools and programming languages of these systems.
• Experience and knowledge in field instrument, control valve, switchgear and MCC are added advantage.
• Experience in managing Control System expansion, upgrading and renewal projects.
• Knowledge and experience with computer system networking, server/client and virtualization environments.
• Familiar with Microsoft Office, Project, Outlook and SAP systems.
• Self-confident and able to work independently with minimum supervision but also, a good team player.
• Experience in managing a team of engineers.
• Able to multitask, perform well under high pressure and quick-changing environments.
• Good analytical, troubleshooting and problem solving skills.
• Good process, project and risk management skills.
• Good written and communication skills.