· Perform the duty of Environmental Control Officer in accordance to Environmental Public Health Act

· Maintain ECO registration by NEA

· Full Time ECO - For contract sum exceeding 50 million

· Submission of site environmental control program and site environmental control report

· Attend to all feedback on such irregularities and inform the Occupier immediately

· Inspect the construction site to ensure all facilities and equipment relevant to the maintenance of environmental health are in proper working condition and do not pose any environmental health hazard;

· Point out and discuss environmental health irregularities such as mosquito and fly breeding, rodent infestation, noise/ dust/ smoke/ water pollution, poor housekeeping, earth littering, poor refuse management, poor maintenance of sanitary facilities, etc. with the occupier of the construction site and recommend measures to rectify such irregularities;

· Ensure workplace is in compliance with Workplace Safety and Health Act and its subsidiary regulations that is relevant to its nature of work

· Monitoring of the WSH Management System implementation procedures on site

· Conducting regular site inspections and corrective actions

· To enforce and monitor safety conduct on site

· Carry out investigations and reporting on all incidents, inclusive of accidents, near misses and dangerous occurrences as necessary

· Oversee safe project execution & lead the subcontractors to ensure compliance to all WSH matters

· Liaise closely with project team to provide assistance in any WSH matters

· Recommend the employer of the worksite to implement such reasonably practicable measures to remedy the unsafe condition or unsafe work practice

· Assist in implementation of safety measurement on the worksite

· Identify any unsafe condition in the worksite or unsafe work practice which is carried out in the worksite

· To inspect and report any safety infringement

· Updating & maintaining of all Safety Health & Environmental documentations and legal registers.

Requirements:

· Candidate must be a Registered Environmental Control Officer with National Environmental Agency

· At least 2 years of working experience in related field is required

· Possess Advance Certificate in WSH or Safety Coordinator Training Certificate

· Minimum 2 years of relevant working experience in Building Construction or LTA Projects

· Manage working at Height

· Lifting Supervisor

· Confined Space Safety Assessor

• Establish new and maintaining existing relationships with customers.
• Manage and interpret customer requirements and calculate quotations for clients.
• Perform pre-sales technical assistance and product education.

Requirements:

• Diploma in Electronic, Mechanical/Mechatronics Engineering
• At least 2 years of sales experience in cleanroom environment/semiconductor industry

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Summary: The Credit Control department is responsible for the expeditious collection of revenue from all customers within the credit terms and period. This includes customers paying from Europe, Americas, etc and any other areas which may be allocated to the Credit Controller. The Credit control department also liaise with some Asia agents on collections they make on our behalf. They are also responsible for recording of disputes and following up on the resolution of these disputes.

Reports to: Credit Control Manager

Role and Responsibilities:

• Timely collection of payments;
• Following up on disputes on invoices and queries and ensuring they are attended to promptly;
• Provide prompt updates on customers’ accounts;
• Preparing of Statement of Accounts for customers and reports for agents;
• Submission of payment details in system when payments are credited in the account;
• Report collections forecast;
• Management reporting;
• Working with internal and external parties – Business units, Revenue Process team, Sales & Marketing teams, customers and agents.

Requirements:

Education, Knowledge & Working Experience

• Minimum Diploma in Finance or related field;
• Min 3 years of experience in credit and control function ideally in a shipping environment;
• Knowledge of credit risk analysis;
• Computer literate, excellent in MS Excel.

Personal characteristics

• Good interpersonal and communication skills, spoken and written;
• Able to multitask, prioritize, and manage time efficiently;
• Possesses creative problem-solving and negotiation aptitude;
• Goal-oriented, organized team player;
• Self-motivated and self-directed.

about the company

My client is a specialised manufacturer serving the machinery/equipment market. They are a Chinese MNC and with their innovating technology, this is a great brand to join at an exicting time in their development. The role needs the candidate to be based permanently in Hanoi, Vietnam

about the job

• Leader of the Quality Department
• Work with a cross-functional team to manage quality issues in New Production Introductions (NPI) program, resolving issues in material or process to successfully reach mass production
• Work with Purchasing and Engineering Team to develop local sourcing and manage supplier quality issues
• Establish control plans based on customer requirements and PFMEA for incoming, in process, outgoing and reliability inspection
• Drive the implementation of process control in critical process that will impact product quality
• Initiate activities and programs for continuous improvement on product quality and manufacturing processes
• Manage field returns and complaints

skills & experience required

• Master / Degree in Electrical / Mechanical / Manufacturing Engineering or equivalent
• Minimum 10 years of experience in contract manufacturing / services (EMS) environment
• Prior NPI manufacturing experience will be a plus
• Extensive Experience in supplier & product quality management
• Six sigma certified / lean manufacturing / continuous improvement techniques a plus
• Have good understanding of PPAP, and quality tools like MSA, SPC & FMEA
• Will be based in Hanoi, Vietnam permanently

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job.
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

1. Support the implementation of quality measures for nursing homes, which includes:Planning and organizing engagements with nursing homes to share the purpose and details of the quality measures.

• Presenting (using Tableau) and analysing the data for the quality measures.
• Preparing reports for CCOs and AIC management.
• Addressing questions from CCOs with regards to the quality measures.

2. Support the development of quality measures for other eldercare services, which includes:

• Reviewing local service/regulatory requirements, good practices, international practices to identify potential quality measures for home nursing care and other community-based care services.
• Conducting a preliminary analysis and presenting the findings.
• Liaising with other AIC Divisions to support the team’s quality measurement work.
• Organising meetings with the appointed workgroup, who will deliberate and select the quality measures for the sector.

3. Assist in the implementation of other key quality initiatives such as:

• Facilitating discussions with nursing homes to develop action plans with the aim of improving the safety culture in their organisations.
• Supporting the implementation of a quality assurance programme involving nursing homes and home nursing care providers.

Job Requirements:

• Degree in any discipline with 1 to 3 years of working experience. Entry-level candidates will also be considered
• Experience in data collection, analysis, visualisation and reporting; and knowledge of the community care sector would be an advantage
• Familiarity with analytics and statistical software e.g., Tableau, Stata would be an advantage
• Effective interpersonal, engagement and follow-up skills
• Strong written and verbal communication skills
• Passion for quality and ageing issues
• Resilient and results-oriented

Responsibilities:

• Prepare annual credit reviews and credit assessments on new and existing cases
• Prepare the necessary documents and perform the periodic risk reports
• Perform the periodic risk reports and monitor the submission of annual credit reviews
• Assist in market risk and liquidity risk management
• Reviewing KYC and CDD duties
• Perform ad-hoc assignments assigned by the Bank

Requirements:

• Degree holder with at least 5 years of risk control and monitoring experience in Banks
• Effectively bilingual (to review credit document in both English & Chinese due to Head Office requirement in China)
• Proficient in MS Excel, PowerPoint, and Word
• Only Singaporeans

Please state your availability, currentand expected salary in the resume.

Qualified or interested candidates, please visit our GMP website at

www.gmprecruit.com to apply for this position with GMP Job Code: 23766

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | Paris Low | Registration No: R22106109

Roles & Responsibilities

Roles and Responsibility

· Able to read and interpret technical and fabrication drawings

· Able to review Documents (BOM, ITP, Procedures, etc) and Drawings as per specification requirements

· Piping, Steel Structure and raw materials verification and inspection

· Liaises with Vendors on work schedule and activities (Load-Test, NDE, Painting, etc)

· Able to use measuring, technical instrument, including micrometer, weld-gauges etc

· Ensure Welding is performance according to the approved WPS

· Conduct in-line machined, Fit up and visual inspection (with reports) according to require standards, specification, PRINT prior to delivery or customer inspection

· Assist in compilation of Quality documents prior customer acceptance

· Compliance to HSE regulations and requirement at all time.

· Monitor in-progress activities with effective coordination among respective team for updates

· Report to QC Engineer on Work activities and Job status

· Liaises with QC admin on reports and documents status for submission.

· Willing to perform other ad-hoc work scope when assigned

Qualification

· Diploma in engineering, CSWIP 3.1 certificate

· Good knowledge in ISO 9001:2009, ISO45001:2018 requirements

· Minimum 3 years of relevant working experience in offshore platform/ oil and gas industry

· Knowledgeable in reading, understanding engineering drawings and specification requirements

· Understand piping fabrication/installation inspection and testing requirements

· Knowledgeable in welding inspection and quality control system

· Familiar with basic conventional NDT methods

· Computer literate and familiar in using basic Microsoft office programs

· Good/corrected vision

· Good team player and able to work independently

· Good communication and interpersonal skill

· Willing to perform overtime, shift work when required

Core Responsibilities:

• To perform quality assurance functions with regard to the product (jet engine components), process and maintain quality management system while ensuring compliance with all related government agencies, aviation authorities and customers’ requirements and regulations.
• Establish quality procedures and quality control instructions.
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality.
• Perform internal audits to evaluate quality system, products and processes (ISO9001 / AS9100 / NADCAP).
• Perform vendors’ and on-site audits as required.
• Uphold customers’ and regulatory authorities’ requirements.
• To carry-out other QA functions as required.

Qualifications:

• At least 2-3 years’ of relevant experience in Aerospace QA environment.
• Good analytical, communication and interpersonal skills.
• Meticulous attention to details, able to multi-task and commit to job.
• Familiar with ISO9001 / AS9100 Quality Management System requirements.
• Experience in using problem-solving tools including fishbone diagrams, FMEA and 5-whys methodology.
• Able to interact effectively with other functional departments such as Engineering and Production to resolve issues relating to products and processes.
• Familiarity with audit covering special processes including heat treatment, plasma coating, NDT would be a plus
• Experience in metallurgical laboratory evaluations would be advantageous

Education Requirements:

• Degree / Diploma in Mechanical / Aeronautical Engineering

My client a well established Pharma company is looking out for a competent QA Associate, this following are the requirements:

Responsibilities

• Contract/External Manufacturer Quality Oversight: Monitor quality aspects of contract manufacturers, including handling OOS/NCR/Deviation and CAPA, Change Control, and routine stability testing. Ensure compliance with GMP and relevant standards, meeting timelines for actions.
• Releases of products : Oversee batch release to prevent recalls or critical quality issues in the market.
• Change Control: Address individual change controls promptly and efficiently. Manage the change control process, ensuring compliance with GMP and company SOPs. Execute change control tasks within defined timeframes.
• Artwork Review: Conduct artwork reviews to meet requirements.
• Manage deviations, NCR, CAPA: Prevent recalls or critical quality issues related to due diligence.
• Customer Complaints: Collaborate with internal departments and suppliers to oversee the complaints process.
• Document Management:Update SOPs/WIs/FGS as per role responsibilities.
• Internal and External Auditing: Conduct and faciliate resolution audits within specified timeframes, adhering to regulations and SOP and follow up on NCR/CAPA outcomes.

Key Requirements

• Possesses BSc in chemistry, pharmacy, or related field.
• 1 to 3 years of QA experience in pharmaceutical/medical device industry
• Strong familiarity with Good Manufacturing Practice (GMP) and Good Distribution Practice (GDP)
• Experience in supply chain quality, manufacturing quality, or quality management in commercial settings.
• Proficient in deviation management, CAPA, change control, and documentation within pharmaceutical/medical device sectors.
• Auditing experience is desirable.
• High level of attention to details

How to Apply:

Interested applicants may apply by sending in your updated résumé (in MS Word format) to my email or apply directly:

Consultant: Tan Jun Jie

EA personnel reg. no.R1878852

EA License No. 17C8502

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / Automation Engineer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.00 pm)
• Salary Package: Up to $4,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project-related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or overseas
• Project presentation & documentation
• To work with third-party engagement wherever necessary for project-related matters

APPLY NOW!!!

• Diploma / Degree
• Min 5 years of relevant experience
• Proficient in PLC programming is compulsory

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65637 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing/ Prefabricated Steel
• Position Title: Assistant Quality Engineer
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Basic Salary Up to $3,500 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Conduct internal audits and supplier audits to evaluate compliance with quality standards.
• Participate in product and certification audits.
• Assist in the establishment and maintenance of procedures, work instructions, and document control.
• Analyze test reports and collaborate with relevant teams to identify areas for improvement.
• Address potential quality issues and work with cross-functional team members to implement follow-up actions.
• Collaborate with the relevant team to investigate root causes, develop Corrective and Preventive Actions for non-conformance or procedural failures.
• Support the preparation of Quality Assurance/Quality Control (QA/QC) plans.
• Formulate QC checklists, inspections, and procedures related to QA/QC.
• Compile monthly reports to track quality and compliance performance.
• Maintain documentation related to certifications.
• Assist the QA/QC department in areas of Health, Safety, and Environment (HSE) by participating in hazard assessments, incident investigations, and risk assessments when necessary.
• To support and engage in other activities or new project development as and when required

APPLY NOW!!!

• Min Diploma in Engineering or other relevant fields
• More than 2 years' experience in QA/QC and audits
• Independent and self-motivated

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65806 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Establish new and maintaining existing relationships with customers.
• Manage and interpret customer requirements and calculate quotations for clients.
• Perform pre-sales technical assistance and product education.

Requirements:

• Diploma in Electronic, Mechanical/Mechatronics Engineering
• At least 2 years of sales experience in cleanroom environment/semiconductor industry

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

The QA Officer is a key appointment in the department and takes the lead in the development, monitoring, and review of QA procedures. The QA Officer is also responsible for ensuring the administration and accurate and appropriate recording and storage of QA records and associated documentation. He / She will also provide administrative support to the department and the QA structures of HWA as required.

This is a position of responsibility that requires the ability to work autonomously and the confidence to provide sound direction and guidance to colleagues, both junior and senior, concerning quality assurance requirements and procedures.

Job Descriptions:

• Support quality assurance and enhancement activities throughout the School
• Play an active role in ensuring that quality assurance and enhancement issues are appropriately considered throughout the School
• Manage the production of relevant quality assurance literature, reports, and other documentation
• Prepare executive summaries of all relevant internal and external documentation and outputs, as required by management and other audiences
• Prepare reports and other forms of assurance for the Academic Board and the Governing Body
• Assist management and staff on developments within the fields of quality assurance and enhancement
• Any other relevant duties assigned by the School

Requirements:

• Bachelor's degree with 1-2 years of related work experience.
• Knowledge of Law or Quality Assurance will be an added advantage.
• Self-motivated, versatile, resourceful, and result-oriented.
• Able to work in a fast-paced environment, multitask, and work independently with minimal supervision.
• Proficient in MS Office.

Responsibilities

• Liaison with customer / supplier on production quality issues, drive improvements;
• Establish Quality Inspection Procedures ;
• Perform internal audits to meet AS9100 & NadCap requirements;
• Analyse process capabilities (cpk) and recommend areas of improvements;
• Perform Gage R&R, calibration of CNC and quality jigs & other instruments

Requirements

• Degree in Mechancial / Production Engineering or other educational background with relevant working experience;
• Familiar with ISO/ QS/ AS Quality Management system, Qualified internal auditor;
• Must be well verse in interpreting mechanical drawings (ISO, GD&T)
• Experience in Coordinte Measuremnt Machine (CMM) Programming an advantage;
• Good analytical knowledge and sense for technical details & precision
• Passion to innovate and improve, willingness to learn & adapt to challenges
• Good team player, ability to communicate well within all levels of the organization

• Nearest MRT: Buona Vista

• Previous experience in courseware design & development in the adult education sector is more advantageous.

Job Description

1. Implement and monitor post-course evaluations.
2. Prepare and perform data analysis using post-course evaluation reports.
3. Perform and manage functions of the quality assurance unit to support overall direction of the team.
4. Collaborate with relevant teams to develop, strengthen, implement, and communicate improvements in internal processes.
5. Participate in ad-hoc projects when assigned.

Job Requirement

1. Singaporean only.
2. Min Degree.
3. Strong interpersonal and communication skills.
4. Proficient in Microsoft Office applications, especially Microsoft Excel. Proficiency in Microsoft Power BI would be a bonus.
5. Previous experience in courseware design & development in the adult education sector is more advantageous.

Interested candidates please click “Apply Now”.

We regret to inform that only shortlisted candidates will be informed.

Nicky Yew Soo Ee

Fulfillment Team

BGC Group Pte Ltd

EA: 05C3053

Registration No: R22109448

Job Description:

Spare Parts

· To deliver spare parts service to internal and external customers within the Service level agreement (SLA)

· To monitor processes & procedures for service parts operations such as advanced / standard replacement, repair & return, analysis and return process

· To monitor and make sure all the loaned parts to customers and engineers were return according to procedure

· Involve in customs, freight matters e.g. freight bill negotiation / verification, reviewing freight rate and shipping company for all the international inbound / outbound shipment

· To monitor and manage the performance of outsources / non outsourced service logistics operations to ensure service is delivered within KPI

· Guarantee service parts stock data accurate, reduce the company assets safety risk and standardize the service parts management operations

· Achieve KPI set by Management e.g. On time service delivery, Inventory Turnover Rate and maintain spare part stock accuracy.

· Monthly reporting e.g. inventory, borrowing, repair & return, analysis reports

Quality & Operation

· To audit quality of safety security domain and improve network change quality

· Communicate and audit engineers to ensure engineers comply with the network change process and KCP as well as D&S Cyber Security Management Requirements

Job Requirement:

· Diploma or bachelor degree in warehouse / inventory management for spare part position

· Min. 1 year relevant experience in warehouse / inventory management is preferred

· Excellent organisational skills

· Good interpersonal and communication skills, able to interact with internal / external customers

· Need to be able to travel within Singapore to different offices / warehouse

· Good command of English and Chinese is required to be able to communicate with various speaking business associates

· To be able to work independently and make skillful decisions

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Supplier Quality Engineer
• Working Location: East (Changi North)
• Working Hours: Monday to Friday, 8.15 am – 6 pm
• Salary Package: Up to $4,000 + Bonus
• Duration: Permanent

Key Responsibilities

• Manage quality performance of supplier.
• Manage supplier First-Article processes and part qualification.
• Ensure supplier quality records are updated promptly.
• Responsible for ensuring that Supplier Quality Issue is resolved.
• Conduct External audit to ensure conformance to specified requirement.
• Support Internal, 3rd Party & Customer System audits.
• Support QA initiatives/ activities (e.g new product quality review, customers’ quality audit, project transfer, etc.).

APPLY NOW!!!

• At least 2 years of QA/QC working experience in precision engineering industry.
• Vendor management experience is preferred.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65906 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Pest Control Service Technician

Job Roles & Responsibilities:

• To implement our Integrated Pest Management program and maintain pest-free premises for our Clients.

• To eliminate specific pest problems safely and effectively by inspecting and administering approved treatments.

• To advise the Client on proper housekeeping, sanitation, and proofing measures.

• To complete the appropriate Forms accurately and submit them on time.

• To upkeep and maintenance all equipment in good condition

• To drive the assigned company van safely and courteously and at all times, keep the van clean, secure, tidy, and road-worthy.

• Enjoy meeting and helping people solve their pest problems.

We offer:

• Monthly upgrading training will be conducted to make you the best you can be.

• Starting basic salary of $2,500.00 with opportunity to earn $3,500.00 or more during probation.

• Once confirmed, earning around $3,000.00 to $4,500.00.

• 13th Month AWS.

• 5-day work week with 14 days of Annual leave.

• Medical and Dental benefits for yourself and YOUR FAMILY.

Your Qualifications:

• Must possess a Class 3 Driving Licence.

• With experience

• A valid NEA Vector Control Technician Licence

• Only Singaporean.

• Completed at least GCE N-Level education.

• Enjoy working in an outdoor environment.

• Enjoy meeting and helping people to solve their pest problems.

• Have a friendly & approachable personality

Kindly whatsapp to 87883388 ( Jay )

Job Description & Requirements

1. Job Title : Assistant Manager / Senior Executive – Quality & Compliance

Location : Changi South

Industry : Freight Forwarding /Logistics

2. Reporting To : Senior Manager – Quality & Compliance

3. Department : BUSINESS DEVELOPMENT

4. Duties and Responsibilities :

• Assist Senior Manager of Quality & Compliance to oversee the ISO Quality Management System held by the company.

• Work with internal stakeholders from Air Freight, Ocean Freight, Logistics, Courier, Cross Border Trucking Departments in achieving and meeting the set quality standards and procedures.

• Conduct training to stakeholders on topics related to quality standards and procedures.

• Work with internal stakeholders to understand and to meet the needs of customers.

• Gather quality objectives achievement metrics by internal stakeholders.

• Gather quality objectives achievement metrics by key suppliers.

• Work with internal stakeholders to gather customer satisfaction metrics.

• Monitor compliance to national and international quality standards and related regulations.

• Participate in quality related activities such as audit, qualification program, claims etc.

5. Experience : Minimum 2 years’ experience in quality management.

6. Special Skills/Qualification : Diploma level or higher. Knowledge of ISO9001, ISO134

Job Purpose

You are required to provide underwriting support for all product lines in New Business Underwriting (NBU)

The Job

• Underwrite new applications for life, accident & health and long term care proposals
• Lead a team of underwriters, countersign their work and provide guidance to them
• Provide underwriting advice & support for financial planners through e-booking, emails and phone calls
• Provide critical liaison and build strong business relationship between NBU and distribution channels
• Conduct underwriting training for distribution channels
• Project management, e.g. reviewing underwriting guidelines, reviewing & streamlining work processes to support business operations
• Ensure all department KPIs are achieved
• Continuous Customer Engagement: to keep the financial planners updated on a continuous basis throughout the assessment of new business applications - through phone calls, emails and meetings (if required). This would include sharing details of the queries raised, possible options to expedite case closures and for postponed or declined cases. To ensure that we proactively engage with the financial planners and provide best in class customer service.
• Take accountability in considering business and regulatory compliance risks and take appropriate steps to mitigate the risks
• Maintain awareness of industry trends on regulatory compliance, emerging threats and technologies in order to understand the risk and better safeguard the company
• Highlight any potential concerns/ risks and proactively share best risk management practices

Our Requirements

• Degree with at least 8 years’ experience in underwriting Life, Accident and Health risks
• Non-degree holders who have relevant experience or certification in underwriting may be considered
• Good team player with strong analytical skills & ability to work under pressure
• Good interpersonal and communication skills
• High level of integrity, take accountability of work and good attitude over teamwork
• Take initiative to improve current state of things and adaptable to embrace new changes

About Great Eastern

Established in 1908, Great Eastern places customers at the heart of everything we do. Our legacy extends beyond our products and services to our culture, which is defined by our core values and how we work. As champions of Integrity, Initiative and Involvement, our core values act as a compass, guiding and inspiring us to embrace the behaviours associated with each value, upholding our promise to our customers - to continue doing our best for them in a sustainable manner.

We work collaboratively with our stakeholders to look for candidates who exhibit or have the potential to embrace our core values and associated behaviours, as these are the key traits that we expect from our employees as they develop their careers with us.

We embrace inclusivity, giving all employees an equal opportunity to shine and play their role in exploring possibilities to deliver innovative insurance solutions.

Since 2018, Great Eastern has been a signatory to the United Nations (UN) Principles of Sustainable Insurance. Our sustainability approach around environmental, social, and governance (ESG) considerations play a key role in every business decision we make. We are committed to being a sustainability-driven company to achieve a low-carbon economy by managing the environmental footprint of our operations and incorporating ESG considerations in our investment portfolios; improving people’s lives by actively helping customers live healthier, better and longer; and drive responsible business practices through material ESG risk management.

To all recruitment agencies: Great Eastern does not accept unsolicited agency resumes. Please do not forward resumes to our email or our employees. We will not be responsible for any fees related to unsolicited resumes.

Job Description

• Industry/ Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: Quality Engineer (Based at Bintan)
• Working Location: Bintan
• Working Hours: Mon – Fri (8 am – 5 pm)
• Salary: Basic up to $4500 + Overseas Allowance + Variable Bonus (Expat Package)
• Duration: Permanent

Key Responsibilities

• Develop, implement and maintain a quality management and continually improve its effectiveness in accordance with quality management systems standards for QC/QA activities assigned.
• Assist in managing and planning for internal audit.
• Assist the Management Representative fo the Quality Management System.
• Participate in process development, evaluation and improvement to achieve higher yield, better quality and lower cost.
• Participate in failure analysis of returned samples and/or process samples in support of the troubleshooting efforts by carrying out sampling tests and measurements.
• Help to manage QA laboratory functions and activities in accordance to the established procedure to ensure compliance to the specified standards in quality.
• Coordinate and support other departments in issuance of test standards and software.
• Assist to compile, coordinate and verify the corrective actions using the 8D methodology.

APPLY NOW!!!

• Degree in Quality/Electrical & Electronics or equivalent.
• Minimum 5 years of relevant experience in similar capacity and industry.
• Possesses strong quality analytical backgrounds.
• Possesses strong leadership qualities and management skills.
• Knowledge and experience in ISO9001 and TS16949 will be an advantage.
• Willing to be posted to Bintan.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65821 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Purpose

You will oversee end-to-end policy services activities (e.g. billing processing, etc.) and give advice and lead the Business Processing team to achieve the overall Department's target.

The Job

· Handles escalation and communication with policyholders and intermediaries

· Actively participate in departmental projects and initiatives; Provide in-depth practices and business logic as business representative

· Carry out tasks / actions without precedent events independently

· Implement new processes to improve efficiency

· Set the direction of process improvement through projects and initiatives including collaboration with other sections

· Handle business processing related enquiries from third parties like clients, intermediaries, TPA and other departments

· Review and implement new SOPs, incorporating changes due to compliance and new ways of working

· Lead and coach multiple teams of Business Processing staff for day-to-day business activities and operations

· Pro-actively allocate resources based on business priorities

· As part of the leadership team, work with key stakeholders to proactively shape the organisation’s cultureand conduct environment that is aligned to the organization’s Core Values

· Champion culture and conduct behavioral expectations within the Department/ Division

· Takes accountability in considering business and regulatory compliance risks and takes appropriate steps to mitigate the risks

· Maintains awareness of industry trends on regulatory compliance, emerging threats and technologies in order to understand the risk and better safeguard the company

· Highlights any potential concerns/ risks and proactively shares best risk management practices

Our Requirements

· Degree holder

· Minimum of 5 years working experience in Group Insurance Business Processing role

· Minimum of 5 years in a leadership capacity

· Demonstrates alignment with the organisation’s core values through expected behaviours

· High level of integrity, takes accountability of work and good attitude over teamwork

· Takes initiative to improve current state of things and adaptable to embrace new changes

About Great Eastern

Established in 1908, Great Eastern places customers at the heart of everything we do. Our legacy extends beyond our products and services to our culture, which is defined by our core values and how we work. As champions of Integrity, Initiative and Involvement, our core values act as a compass, guiding and inspiring us to embrace the behaviours associated with each value, upholding our promise to our customers - to continue doing our best for them in a sustainable manner.

We work collaboratively with our stakeholders to look for candidates who exhibit or have the potential to embrace our core values and associated behaviours, as these are the key traits that we expect from our employees as they develop their careers with us.

We embrace inclusivity, giving all employees an equal opportunity to shine and play their role in exploring possibilities to deliver innovative insurance solutions.

Since 2018, Great Eastern has been a signatory to the United Nations (UN) Principles of Sustainable Insurance. Our sustainability approach around environmental, social, and governance (ESG) considerations play a key role in every business decision we make. We are committed to being a sustainability-driven company to achieve a low-carbon economy by managing the environmental footprint of our operations and incorporating ESG considerations in our investment portfolios; improving people’s lives by actively helping customers live healthier, better and longer; and drive responsible business practices through material ESG risk management.

To all recruitment agencies: Great Eastern does not accept unsolicited agency resumes. Please do not forward resumes to our email or our employees. We will not be responsible for any fees related to unsolicited resumes.

• Understand AML, Compliance and regulatory controls in each dept and requirements of applicable regulations and policies
• Assist to create quality assurance programs in line with Compliance and AML action plans and internal policies
• Review and update QA programs periodically and upon changes to laws and policies
• Execute the QA program and report on the results, highlighting actual/potential breaches, areas of weakness and making recommendations for improvements where applicable
• Follow up on QA recommendations, working closely with Compliance and AML teams and other depts
• Oher tasks as assigned by Team or Dept Head

Requirements :

• Degree or Diploma
• Professional certification such as CAMS or ICT
• At least 2 years experience in a QA or audit function in a bank or financial institution focusing on AML and compliance.
• Must have an eye for detail and an analytical mind and willing to be hands on.
• Good working knowledge of AML and corporate compliance requirements.
• Proficient in Microsoft Excel and some experience in dashboard creation

Job Purpose

You are required to provide underwriting support within the risk management framework of GELS prescribed guidelines, for individual life product lines (especially High Net Worth products like Universal Life, Whole Life Multiplier, and Investment Linked Plans).

The Job 

• Provide underwriting due diligence on new applications, within the prescribed guidelines by GELS and Reinsurance partners
• Identify risks and apply best underwriting practices in line with the industry standard
• Provide competitive, yet risk appropriate underwriting advice and market leading underwriting services
• Provide critical liaison and build strong business relationship with external stakeholders like distribution channels (Agency, Bancassurance & Brokers) and Reinsurers, and with internal stakeholders like HNW Business Management team, Group Risk Management, AML & Compliance, Products and Actuarial teams
• Proactively seek for HNW process improvement and instill a culture of customer-first approach
• Ensure timely and adequate support for business including training for distribution channels
• Support in the reviewing and updating underwriting guidelines for High Net Worth products
• Project management, for example to review and streamline work processes to support business operations, prepare SOPs, review forms etc
• Provide underwriting support for post-issue and post-claims underwriting
• Takes accountability in considering business and regulatory compliance risks and takes appropriate steps to mitigate the risks
• Maintains awareness of industry trends on regulatory compliance, emerging threats and technologies in order to understand the risk and better safeguard the company
• Highlights any potential concerns /risks and proactively shares best risk management practices

Our Requirements

• Degree with minimum 10 years of solid experience in underwriting Life, Disability, Critical illness, Accident and Health risks, with at least 5 years of High Net Worth underwriting experience
• Proficiency in Mandarin as candidate is expected to read & interpret medical reports in Chinese language
• Leadership ability, team player, excellent interpersonal and communication skills, problem solving skills and business acumen
• Good interpersonal and communication skills
• High level of integrity, takes accountability of work and good attitude over teamwork
• Takes initiative to improve current state of things and adaptable to embrace new changes

About Great Eastern

Established in 1908, Great Eastern places customers at the heart of everything we do. Our legacy extends beyond our products and services to our culture, which is defined by our core values and how we work. As champions of Integrity, Initiative and Involvement, our core values act as a compass, guiding and inspiring us to embrace the behaviours associated with each value, upholding our promise to our customers - to continue doing our best for them in a sustainable manner.

We work collaboratively with our stakeholders to look for candidates who exhibit or have the potential to embrace our core values and associated behaviours, as these are the key traits that we expect from our employees as they develop their careers with us.

We embrace inclusivity, giving all employees an equal opportunity to shine and play their role in exploring possibilities to deliver innovative insurance solutions.

Since 2018, Great Eastern has been a signatory to the United Nations (UN) Principles of Sustainable Insurance. Our sustainability approach around environmental, social, and governance (ESG) considerations play a key role in every business decision we make. We are committed to being a sustainability-driven company to achieve a low-carbon economy by managing the environmental footprint of our operations and incorporating ESG considerations in our investment portfolios; improving people’s lives by actively helping customers live healthier, better and longer; and drive responsible business practices through material ESG risk management.

To all recruitment agencies: Great Eastern does not accept unsolicited agency resumes. Please do not forward resumes to our email or our employees. We will not be responsible for any fees related to unsolicited resumes.

Spare Parts

· To deliver spare parts service to internal and external customers within the Service level agreement (SLA)

· To monitor processes & procedures for service parts operations such as advanced / standard replacement, repair & return, analysis and return process

· To monitor and make sure all the loaned parts to customers and engineers were return according to procedure

· Involve in customs, freight matters e.g. freight bill negotiation / verification, reviewing freight rate and shipping company for all the international inbound / outbound shipment

· To monitor and manage the performance of outsources / non outsourced service logistics operations to ensure service is delivered within KPI

· Guarantee service parts stock data accurate, reduce the company assets safety risk and standardize the service parts management operations

· Achieve KPI set by Management e.g. On time service delivery, Inventory Turnover Rate and maintain spare part stock accuracy.

· Monthly reporting e.g. inventory, borrowing, repair & return, analysis reports

Quality & Operation

· To audit quality of safety security domain and improve network change quality

· Communicate and audit engineers to ensure engineers comply with the network change process and KCP as well as D&S Cyber Security Management Requirements

Job Requirement:

· Diploma or bachelor degree in warehouse / inventory management for spare part position

· Min. 1 year relevant experience in warehouse / inventory management is preferred

· Excellent organisational skills

· Good interpersonal and communication skills, able to interact with internal / external customers

· Need to be able to travel within Singapore to different offices / warehouse

· Good command of English and Chinese is required to be able to communicate with various speaking business associates

· To be able to work independently and make skillful decisions