§ Accountable for the quality and quality of every activity, precise knowledge of all aspects of engineering construction relating to Civil, Architectural, and Structural discipline interfacing the multidisciplinary processes.

§ Responsible for QA/QC documents of the complete project, including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.

§ Develop and determine all standards to perform inspections and tests on all procedures, oversee all testing methods, and maintain high-quality standards for all processes.

§ Review the quality of all materials at the site, ensure compliance with all project specifications and quality, and collaborate with the department for all material procurement and quality materials.

§ Supervise the effective implementation of all test and inspection schedules, ensure adherence to all procedures, and coordinate with various teams to perform quality audits on processes.

§ Assist employees in ensuring knowledge of all quality standards, ensure compliance with all quality manuals and procedures, and collaborate with contractors and suppliers to maintain the quality of all systems.

§ Manage to lift all equipment, handle the efficient storage of all hazardous materials, and perform quality audits per the required schedule.

§ Monitor an efficient system, record all project activities, and analyze all processes to ensure all work meets quality requirements.

§ Manage all work methods, maintain knowledge of quality assurance standards, monitor continuous application for all quality assurance processes, and recommend corrective actions for all operations.

§ Develop a method statement for the activity, including risk assessment, job safety environmental analysis, and Inspection

§ Test Plan and Checklist based on project specifications.

§ Liaise with the Technical Engineer for submission of material submittals to the Consultant

§ Coordinate with the Consultant’s representative and Site In-charge for Inspection.

Note: Will be based in China for at least 6-9 months

Salary up to S$8,000

Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to integrate and resolve abnormal quality issues within the manufacturing process.
• Collaborate closely with cross-functional teams to implement effective solutions and preventive measures.
• Drive initiatives to enhance internal quality control procedures and improve process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead efforts to address and improve customer-reported quality issues, ensuring prompt resolution.
• Prepare comprehensive reports for stakeholders, detailing corrective actions and preventive measures.
• Develop and implement plans to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to improve inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a cohesive approach to achieving quality objectives.
• Oversee personnel-related tasks including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Supervise the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor's degree in a relevant field; advanced degree preferred.
• Minimum 6-8 years of proven experience in quality management, with a focus on manufacturing processes.
• Strong analytical and problem-solving abilities.
• Excellent leadership skills and interpersonal abilities.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience in collaborating with counterparts in China/ Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Will be assisting Material Engineer on all activities. Should have Basic Knowledge of Metals & Non-Metals, Alloys, Able to differentiate / grade / mechanical products with atleast Five yearsof Experience

• Remuneration Package: Up to $10,000 + AWS + Variable Bonus
• Location: West, Walking Distance from MRT Station
• Business Travel: ~35% to Asia Regions

Are you a seasoned quality assurance professional with a passion for excellence and innovation? Our client, a reputable company in the consumer care manufacturing industry, is seeking a dynamic individual for this great opportunity.

Key Responsibilities

• Drive Compliance and Quality Standards: Influence and persuade senior site and sales heads to ensure adherence to top-tier quality systems, mitigating risks associated with non-compliance and subpar quality.
• Global Coordination: Collaborate closely with Group Quality to maintain a unified global approach to quality, providing consistent and comprehensive documentation across various regions.
• Customer Satisfaction: Enhance quality performance by monitoring key indicators on customer complaints, ensuring exceptional customer service while staying competitive in the market.
• Problem-Solving Expertise: Tackle complex challenges involving diverse and critical information, requiring keen recognition and resolution skills.
• Autonomous Decision-Making: Make independent business decisions that significantly impact different manufacturing sites and the overall business.
• Training and Coaching: Provide expert training and coaching to Sales and Site teams on quality and customer-related needs.

Requirements

• Educational Background: Degree in Chemistry.
• Extensive Experience: Minimum of 10 years of experience in Quality, preferably with a background in consumer care or chemical downstream manufacturing industries and experience overseeing Asian regions.
• Product and Market Insight: In-depth understanding of the company’s products and market trends.
• Regulatory Knowledge: Thorough knowledge of QA systems, GMPs, and regulatory requirements, including familiarity with guidelines such as ICH, FDA, EMA, and MHRA.

Interested candidates, please forward your CVs in MS Word format to [email protected].

Reg No. R1983718

Triton AI Pte Ltd

License No. 21C0661

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

What a Quality Engineer (Large Format Operations) does at HP:

• Ensure quality assurance in large format printers manufacturing operations, through HP Product Quality Assurance Plan.
• Manage quality performance of manufacturing partners in Singapore or overseas. Ensure Quality Management System and processes are effectively in-place.
• Lead quality team at manufacturing partners, collaborate across functions and departments, to identify deviations and non-conformances, resolve quality issues, identify and implement corrective and preventive actions.
• Perform regular process and system audits at manufacturing partners to validate quality performance.
• Supervise HP third party quality inspectors to effectively perform outgoing product and process audits.
• Lead in Influencing upstream quality improvements at part suppliers. Work closely with procurement team to address part quality issues and continuously improve quality at suppliers.
• Review and analyze field performance with Customer Assurance team, to drive continuous quality improvements.
• Actively participate in digital transformation of data analysis, quality processes and systems.
• Participate in designing engineering solutions utilizing multiple engineering disciplines for products, systems, software, and solutions based on established engineering principles and in accordance with development technology practices and guidelines.
• Participate in knowledge transfers from global business unit which requires travel out of Singapore, to establish product test plans for quality and reliability performance assurance.
• Participate in developing reliable, cost effective, high quality and sustainable solutions for HP large format printers and accessories.

Individuals who do well in this role at HP, usually possess:

• Bachelor’s degree in mechanical, Electrical, Electronic, or other Engineering, Computer Science, or equivalent.
• Fresh graduates with 0-1 years of experience in manufacturing or quality assurance.
• Eager to learn, connect, participate and contribute.
• Result-oriented, focused to deliver and exceed expectations.
• Attention to details, able to identify rooms for improvement and with desire to improve.
• Ability to apply quality control tools and methods to drive quality improvements. Meticulous in data collection, analysis and problems resolution.
• Ability to manage quality inspectors and technicians and manufacturing partners.
• With exposure to Quality Management System for manufacturing operations.
• Using analytical and statistical tools, to measure quality performance and perform failure analysis; apply empirical analysis, modeling and testing methodologies to validate product designs and specifications.
• Open to change and transformation to ensure quality systems and processes stay relevant and effective.
• Able to work independently, willing to collaborate, connect and partner to win.
• Open to overseas travel.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Job Responsibilities:

• Lead and manage a team of quality control personnel, providing guidance, coaching, and support as needed.
• Develop and implement quality control processes, procedures and standards to ensure that products or service meet or exceed customer expectations.
• Monitor and analyze data related to quality control processes, identifying trends and making recommendations for improvement.
• Work with suppliers and vendors to ensure that raw materials and components meet established quality standards.
• Perform audits of quality control processes, identifying areas for improvement and making recommendations for corrective action.

Job Requirements:

• Major in any engineering field.
• Minimum 8 years of experience in manufacturing field, as well as minimum 4 years in supervisory role.
• Able to work under stress, dynamic and fast pace manufacturing environment.
• Candidates require strong teamwork mindset, posses effective organising and communication skill as needs to cohesively work with customers and internal teams.
• Experience in semiconductor capital equipment manufacturing will be added advantage.

• 5 days, Kallang, Manufacturing
• $6800 - $7200,AWS, variable performance bonus
• Good leadership skills

Job Responsibilities

• Lead and manage a team of quality engineers, technicians and line supervisors by providing necessary coaching and support on daily quality control activities as well as professional growth development in the department.
• Develop and implement quality assurance policies and procedures specific to products
• Establish quality control checkpoints at various stages of the production process to identify defects and non-conformities
• Conduct regular inspections and audits to ensure compliance with industry standards and customer specifications.
• Investigate root causes of quality issues and implement corrective and preventive actions.
• Work closely with production teams to address quality concerns in real-time and prevent reoccurrence on products with quality issues.
• Collaborate with the purchasing/sourcing team to liaise with suppliers to ensure the quality of raw materials and components used in assembly processes.
• Develop and maintain quality metrics and performance indicators to track and report on quality objectives.
• Train and mentor quality assurance staff to ensure competency and adherence to quality standards.
• Stay up-to-date with advancements in quality assurance techniques, regulations, and industry best practices.
• Drive a culture of quality excellence and continuous improvement throughout the company.
• Perform all other related duties as assigned by Plant Manager or General Manager

Job Requirements:-

• Bachelor’s degree in quality management, Industrial Engineering or preferably in Electrical & Electronic, Industrial, or Manufacturing Engineering.
• At least 8-10 years of experience in Quality Control manufacturing with at least 5 years in leadership roles with a track record of success in optimizing production processes and leading teams.
• In-depth knowledge of quality management systems (ISO 9001) and regulatory requirements (RoHS, REACH, etc.).
• Experience in root cause analysis, failure mode and effects analysis (FMEA), and statistical process control (SPC).
• Excellent communication and interpersonal skills, with the ability to collaborate effectively across different levels of the organization.
• Able to perform in a fast-paced environment and meet deadlines
• Able to work well under pressure and handle emergency and stressful situations
• Positive mindset and Can Do Attitude
• Strong decision-making and people management skills

Interested applicants, please send your resume to [email protected]

As a Senior Manager, Front-End Materials, Global Supplier Quality Engineering, you will manage a team to define SPEC GAS & SPEC CHEM Supplier Quality Strategy, Execution plans and Excursion Prevention Programs so as to develop Suppliers through Continuous Improvement Programs to ensure consistent supply of Quality procured materials/services to Micron. You will need to possess both Technical knowledge of Semiconductor Materials and a broad understanding of Supplier blueprint, globally.

You will work in close partnership with key collaborators such as Global Quality, Global Procurement, Technology Development (TD), Global Operation Central Team (OCT), Operations, Site IQC and Process & Equipment Engineering to develop, implement and measure the efficiency of Supplier Quality Management Program.

In addition, you will support Supplier Performance Reviews to ensure suppliers receive timely and accurate supplier performance feedback based on consistent metrics and that supplier quality issues are effectively mitigated, and the expectation of continuous improvement is understood and realized.

You are responsible to improve the Supplier Quality Business Processes and establish the team’s Subject Matter Expertise (SME). You are expected to nurture and reinforce appropriate group values, norms and behaviors. Provide mentorship on employee development, performance, and productivity issues. You will also identify staffing needs and make hiring decisions for your group.

Responsibilities

​Set Strategy and Vision

• Develop and align Spec Gas/ Spec Chem multi-year Quality roadmaps that align with evolving technology needs and supplier landscape.
• Provide advice to Senior Leaders and Executives on strategic supplier engagement decisions, to ensure alignment with quality goals.
• Collaborate with global stakeholders on strategic projects, ensuring Quality insights are integrated to complement technology requirements and cost targets.

Lead Supplier Quality Programs aligned to Micron Technode Roadmap

• Key Material-Supplier Liaison for Critical Technology Projects.
• Work closely with TD to ensure that Quality considerations are taken into account, during the development phase.
• Handle technology transfer material-supplier projects and supervise their implementation and results.
• Develop, communicate, and report metrics to Senior Leaders and Executives.

Develop and Manage team performance to plan

• Lead the team to develop Spec Gas/ Spec Chem Category Quality Strategies for supplier/ material development programs, including the Quality Roadmap and Defense Line Program.
• Guide the team in developing Subject Matter Expertise, overseeing global issues resolution and providing ample opportunities to build material knowledge, fostering an environment of continuous learning and professional growth.

Collaborate with Stakeholders, Partners, and Suppliers on Category Strategies

• Initiate and sustain effective communication with team members, partners, and suppliers
• Share updates back to the Director and/or Global Quality Leadership Teams
• Advance issues, offering options and recommendations for resolution
• Communicate strategic goals, category management plans, initiatives, and targets
• Build and cultivate relationships with key internal and supplier executives
• Provides advice to senior and executive management on strategic decisions.

Requirement

• Bachelor’s Degree/ Master’s Degree in Chemical Engineering or any related Engineering Field
• ⁠More than 5 years of leadership position
• ⁠At least 10 years’ experience in Semiconductor or speciality gases/ speciality chemicals manufacturing.
• ⁠Strong technical background in speciality gases/ speciality chemicals application
• Good communication skills across all level including with senior leadership, and stakeholders, and also be able to deliver presentations at an executive level
• Ability to interact and work effectively interested parties, including supplier, across all levels.
• Experienced in resolving conflicts building effective relationships with internal and external stakeholders.
• Ability to collaborate effectively with cross-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.

obscope:

• Review documents / analytical test results and assess all attributes/elements contributing to product release to determine if product / equipment is fit for release.
• Assess, review and approve changes that may have an impact on product quality, validation and/or cGMP compliance to ensure timely product release to customers.
• Inspect and release process equipment/plant after turnaround.
• Assess, review and approve all cGMP and validation related documentation. Be a subject matter expert for operational quality processes.
• Co-ordinate Periodic Product Review (PPR) activities and compile the report.
• Lead or participate in investigations arising from customer complaints, returned goods or product failure etc, and accurately assess the impact of the complaint/failure/investigation so as to make appropriate recommendations on remedial actions for follow-up.
• Participate as an audit team member in the preparation of site audits by corporate and external groups such as the Food and Drug Administration (US), Health Sciences Authority (HSA)
• Draft, compile, review and update appropriate procedures and listing relating to GMP and operational quality.
• Update Technical Terms of Supply/Quality Agreement and issue Technical Terms of Supply/Quality Agreement change control to customer as needs arise.
• Support shift operations which include production, engineering, laboratory etc. to provide the necessary quality oversight in terms of activities such as change control, deviation investigation etc. for the manufacture and testing of the products.
• Conduct regular walk downs to production facilities including supporting areas. These areas include but not exclusive to production building, laboratories, engineering building and storage facilities

Requirements:

• Minimum Honours Degree in a relevant science discipline
• Preferably with 1-2 years of relevant work experience
• Knowledge on GMP, validation, quality and manufacturing processes.
• Basic knowledge of corporate management systems
• Good knowledge of regulatory processes.
• Possess strong analytical thinking skills and good attention to details
• Immediate candidate preferred
• Able to commit 12 hours permanent day shift

To find out more about this opportunity, please contact Fiona at [email protected]
We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh | Registration No: R1109239

As a Central Quality data analytic engineer, your main responsibility will be as follows:

• working with enormous data and conduct analytics on sophisticated datasets to assist AT to better understand operation. These involve providing solution(s) to pressing manufacturing process issues to drive yield and quality improvement programs particularly on test triggers governance.
• You will identify, collect and engineered both structured and unstructured datasets from separate sources to make available in Big Data platform for user query and analysis. In the process, you may build visualization for business insights and needs.
• You may also build and implement frontier's predictive analytics model, strategy and operation to identify untapped opportunities and expose hidden risk buried inside vast amount of data.
• Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products.
• Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations.
• Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions.
• Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed.
• May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations.
• Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Quality Technician/ Technician
• Working Location: North East (Transport provided).
• Working Hours: Monday – Friday, 8.30 am – 6 pm
• Salary Package: Up to $2300 + AWS
• Duration: Permanent Role

Key Responsibilities

• Ensure that the products being manufactured are up to both company and consumer quality standards.
• Inspect and evaluate materials and components provided by suppliers.
• Responsible for testing and identifying the frequency at which continuous or random tests are undertaken.
• Support in carrying out investigations on products that need enhancements based on customer specifications.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Minimum NITEC qualification in an Engineering field.
• Hands-on experience with measuring equipment such as vernier callipers and micrometer.
• Familiar with CMM programming like PC-DMIS.
• Flexible to work beyond the normal working hours should the need arise.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67086 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities:

• Assists Manager (QA & TE) in preparing and updating documentation for the license renewal audits conducted by the Licensing and Accreditation Unit, Ministry of Health and as required for external accreditation
• Supports the administrative functions of the department.
• These include:
• * Reviewing of work processes on the ground
• * Working with relevant process owners to formulate and/ or update standard operating policies and procedures of PLS.
• Assisting in formulating and/ or updating work instructions.
• * Updating PLS quality records and document control masterist.
• * Conducting internal audits to check on compliance on the ground, after changes made to work processes and as and when required Following up actions/ recommendations after internal quality audits and external surveillance audits
• Maintains the laboratory safety for PLS.
• Works in conjunction with the business office, technical and systems team of PLS in special projects as assigned by Manager, Quality Management, CEO and DOO, PLS.

Requirements:

• Min. Degree in any or related science field of study
• Min. 3 years of working QC experience in a clinical lab environment
• Prior quality management experience handling licence renewal, audit & accreditation
• Good technical knowledge in lab medicine preferred
• Proficient in Microsoft Office, specifically Excel
• Good interpersonal, organizational and planning skills

Interested applicants, please email your updated CV to [email protected] or WA 91792208 for more information.

Recruiter's Ref Code: #HHM

EA Personnel No: R21103938

EA Personnel Name: Reina Ng Hwee Min

Company Registration Number: Recruit Express Pte Ltd (99C4599)

Role Responsibility and Tasks

1. Development Phase - Sourcing, Selection and Qualification Phase

• Drive Wet Chemical and Specialty Chemical Quality risk assessment and ensure all risks are mitigated to support Fabs qualification activities.
• Participate, support, and recommend from quality perspective on global sourcing and segmentation strategies, including business continuity, benchmarking, new markets, request for quotation (RFQ)/ request for information (RFI), sourcing, selection, cost savings and other analytics.
• Lead technical risk assessment audit for new supplier/ material engagement or qualification to assess their capability and readiness for High Volume Manufacturing (HVM).
• Set up, communicate, and ensure suppliers understood and comply with Micron Supplier Requirements Standards (SRS).
• Support cross fab technology transfer activities in terms of new technology Bill of Materials (BOM) and driving global specifications alignment.
• Collaborate with Suppliers on their outgoing analysis capability to align Best-In-Class (BIC) method detection.
• Align and guide Suppliers to aligned Fab’s advance technology needs which include but not limited to:Study BIC test analysis method and align with Supplier with the collaboration with site Chem Lab to support manufacturing needs (FOAK eval, routine quality monitoring, troubleshooting, improvements, etc.).
  Align, correlate, document with suppliers on lab methods / tools / practices and target to achieve low detection at ppq level contamination.
  To provide a platform for technical or knowledge sharing for SQE team.
  Conduct Regular Technical Meetings with Suppliers on metrology CIPs.
  Conduct constant look out of advance chemical analytical equipment and technology, work with internal site/supplier on results correlation and deploy into CIP with suppliers in compliance to advance technology
  Conduct research for ≤ 10nm particle detection and work with internal site/supplier on results correlation, and deploy into CIPs with suppliers in compliance to advance technology
  Lead Suppliers towards ISO17025 compliance.
  
• Set up, communicate, and ensure suppliers understood Micron metrology expectations.
• Support Category Strategy for Benchmark to/with Suppliers to ensure Controls and Preventive measures are in place to support Shift-Left-Strategy. Supplier/Material development programs.
• Participate and support test method benchmarking and analytics with Suppliers

2. HVM Phase - Supplier Development and Excursion Management

• Lead Wet Chemical and Specialty Chemical Global Material Specification definition and alignment activities with internal stakeholders and suppliers.
• Deploy Wet Chemical and Specialty Chemical category Quality programs, lessons learnt and benchmark to/ with suppliers to ensure controls and preventive measures are in place to support Shift-Left-Strategy.
• Host regular Quality and Technical Review (QTR) meetings with strategic and developing suppliers.
• Manage supplier and sub-supplier changes in Supplier Change Management (SCM).
• Work collaboratively with Global OCT MTE, Operations and Facility globally for deep dive root cause investigations, corrective and preventive actions to ensure no recurrence of related Quality issues.
• Define, manage, and monitor supplier monthly quality performance metrics and their compliance to Micron SRS.
• Enhance the supplier quality business processes to improve productivity and efficiency.
• Support Global Procurement on supplier performance rating on Quality related criteria.
• Lead and conduct supplier audit.

Required:

Bachelor's Degree on engineering or related field.

Desired:

Master's Degree on engineering or related field.

Experiences:

• Previous experience working in Chem lab, wet chemical and specialty chemical under semiconductor industry field is preferred
• Basic Knowledge of ISO9001, IATF16949 & ISO17025 requirements.
• Basic knowledge of Wet Chemical and Specialty Chemical applications and wafer manufacturing process.
• Strong analytical skills with experience in MSA and calibration, statistical methods, FMEA, problem solving methodology and quality management systems.
• Ability to interact effectively with internal and external interested parties, across all levels.
• Ability to collaborate effectively with cross-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.

Job Description

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions

Qualification

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.
• Overall work experience of 1 to 3 years in a similar position.
• Basic knowledge & interpretation of gas chromatography, knowledge of densimeter and refractive index equipment preferred.
• Basic knowledge of chemistry.
• Basic Sensory evaluation capability / potential capability preferred.
• SAP knowledge will be an advantage

As Global Front End Central Quality (FECQ) Process Control System (PCS) Engineer at Micron Technology, Inc., you will be accountable for improving the process control for all Micron Fabs.

You work with Front End Fabs and other central teams resources to provide direction and assistance with process control systems and help coordinate control systems across multiple facilities globally.

In this position, you will be tasked with driving SPC program, working with SMAI/IT/vendor for application improvement & upgrade that is aimed at reducing overall product variation which will result in higher process margins, increased yield and reliability as well as productivity.

As FECQ PCS engineer, you will be expected to lead the SWAT, develop and deploy BKM of PCS. You also need to establish metrics, provide coaching and training of BKMs.

Responsibilities:

Support Strategic Process Control System Responsibilities

• Support the PCS roadmap for world-wide alignment and continuous improvement of process control practices.
• Evaluate global needs and cultivate global relationships.
• Support and mentor PCS teams worldwide by providing guidance.
• Work with subject matter experts to identify business process gaps and Best Known Methods (BKMs) to address.
• Evaluate the quality of data collected, drawing conclusions based on this data and initiating follow-up action items.
• Partner with QRA, OCT PEE, cPIE, SMAI and IT to ensure all business needs are properly documented, validated, and escalated as needed.
• Determine if project objectives have been met or if more effort is required.

Process Control Engineer Responsibilities

• Provide direction on the facilitation of practical application of PCS disciplines of SPC, PCS or Metrology Sampling within MFG environment.
• Partner with Site Quality, OCT PEE, cPIE, and IT to ensure all business needs are properly documented, validated, and escalated as needed.
• Facilitate root cause identification activities on fabs related excursion to ensure proper reaction PCS actions are followed through on.
• Be able to support PCS-SPC teams worldwide by providing guidance in PCS solutions such as inline detection methodology through SPC, statistical techniques for establishing proper limits for different type of distributions to improve inline detections.
• Co-lead SWAT and work with Subject Matter Experts to identify business process gaps and Best Known Methods and facilitate communication plan for all SWAT activities to/from stakeholders, participants, and management.
• Refine Program/SWAT charter, and build roadmap going forward for world-wide alignment and continuous improvement of process control practices.
• Drive and lead SPC Program for alpha site to achieve variation reduction goals to support the Cpk and yield.

Demonstrate Individual Competence/Technical Expertise

• Provide technical consulting and hands-on assistance to Fab PCS teams for creation and/or identification of best PCS solutions/Statistical methods, troubleshooting existing PCS solutions, and deployment of PCS solutions.
• Define PCS software requirements for Corp IT. Act as the liaison between SWAT team and Corp IT team; provide technical expertise to assist IT with understanding the SWAT’s current and future needs.
• Evaluate PCS solutions - third-party software and hardware selection.
• Recognize functional and business process gaps. Formulate proposals for closing them.
• Increase technical expertise by participating in classes conferences, and researching existing literature and existing Micron expertise.

Program Management

• Demonstrate ability to move projects effectively through project lifecycle – initiate, plan, execute, and close – while balancing time, cost, quality, scope and risk/opportunity constraints.
• Motivate stakeholders and all project team members to take ownership of project and its success.
• Direct and coordinate the activities of others to accomplish project tasks successfully.
• Define metrics to gauge project success.

Communication

• Provide periodic updates based on project criticality to stakeholders and team members on project status, progress, and roadblocks/opportunities..
• Offer and communicate strategic ideas and thinking to meet corporate objectives. Listen to customer’s and stakeholder’s input/feedback and act to maximize benefit to Micron and meet corporate goals.
• Build and maintain external and internal relationships to broaden influence and increase learning opportunities in the PCS area.
• Provide communication to the World-wide PCS group on PCS lessons learned, project repositories, summits, new technologies, conference proceedings and Best Known Methods (BKMs).
• Demonstrate cultural sensitivity - Show respect for different cultures and languages.
• Communicate effectively with vendors/suppliers. Understand and use appropriate communication channels (other Central Team members, Purchasing, etc.). Clearly and accurately communicate Micron’s needs and objectives to vendors/suppliers. Adheres to company ethics and confidentiality policies regarding vendors/suppliers.

Requirements :

• Bachelors Degree or equivalent experience in Engineering or related field of study
• 5 years experience in Process Control Engineering.
• A Process/Equipment Engineering background and experience.
• An understanding of Fab processes and tools.
• Familiarity with area and Fab software applications, such as SPACE, GeRM, Sigma, JMP, SoV, ORION, and Yield 3.
• Strong analytical problem-solving skills.
• Self-motivated and people oriented: have strong persuasive and diplomatic communication skills (oral, written, one-on-one, and group).
• Been recognized as an individual who obtains results through the coordination of successful teams.
• Good time-management skills.
• Good judgment.
• Above average working relationships with co-workers.
• A high level of self-motivation with a good work ethic.
• The ability to work unsupervised and support production needs

Project Manager / Senior Engineer

Salary Range: $5500 to $6800

Duties & Responsibilities

1. A strategist with expertise in planning and executing projects with a flair for adopting modern methodologies in compliance with quality standards.

2. Generating data from the drawing, equipment layout, purchase specification, and conducting technical bid analysis.

3. Effectively delegate tasks and duties to the project team, and ensures assignments are completed within the timeline.

4. Regularly inspect the progress of the work on-site and provide guidance to the project and operation teams on best practices and potential efficiencies on scheduling and processes.

5. Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.

6. Preparing RFQs, receipts, cost estimates for sub-contract works, and pipeline procurement items with vendors.

7. Work closely with operations team to manage project profit margin by carrying out price comparisons and managing operating costs.

8. Problem-solving expertise, demonstrated by identifying and resolving problems in a timely manner; working with others to solve complex issues.

9. Enforce site safety procedures, identify and rectify risks arising from the workplace or work process.

10. Review and monitor weekly, monthly progress claim on a percentage of work done, interim payment, and project cash flow status.

11. Presenting monthly project status reports and change orders to the top management.

12. Ensuring that the project starts on time and ends within the estimated duration.

Requirements:

1. Degree or Diploma in Mechanical, Electrical or Civil Engineering

2. Minimum 2 years of experience in Project Planning & Management, Construction, Operations & Maintenance, Installation & Commissioning, Resource Optimization, and Team Management

3. Must have Project Management Experience in Electrical, Mechanical (M&E), Civil Engineering or related

4. Good knowledge in Auto Cad software is an added advantage

5. Must have knowledge in the Process implementation at Project Site.

6. Class 3 Driving License is a plus.

7. An effective communicator with excellent relationship management skills and strong analytical, leadership, decision making, problem-solving & organizational abilities

8. Work on multiple projects simultaneously and must be able to work in a fast‐paced, multi‐task environment, balancing competing priorities and multiple projects assignments.

If you believe you are a suitable candidate for this role, drop us an email together with your latest CV to [email protected]

or Whatsapp to 9886 7100

Only shortlisted candidate will be called for the interview

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Supplier Quality Management Engineer to be part of our Quality & Reliability Engineering department to ensure high quality of incoming materials going into the fab with early detection gating methodology of abnormal materials.

What you will be working on:

• Work with Suppliers/Subcontractors to ensure high quality of incoming materials going into the fab with early detection gating methodology of abnormal materials; Collaborate with Suppliers/Subcontractors for Quality Control Development & Improvement Programs; Work with Stakeholders on New Suppliers and Materials Evaluation.
• Execute Certificate of Analysis (COA) & Statistical Process Control (SPC) system for quality control of incoming materials.
• Chair Material Review Board (MRB) meetings with risk-based assessment and material disposition.
• Conduct Supplier Audits and follow-through till closure of Supplier Audit CARs.
• Lead and co-work with Material Owner for Supplier/Subcontractor Complaint till 8D closure.
• Manage change request from/to Suppliers/Subcontractors.
• Work with Purchasing & Material Owner for New Materials & Suppliers Evaluation.
• Maintain Supplier Quality Scorecard to objectively measure the quality performance of Suppliers/Subcontractors and drive for quality gap closures.
• Use Data Analytics to identify opportunities of quality improvements on incoming materials.
• Collaborate with Suppliers/Subcontractors for Quality Control Development and Improvement Programs.
• Drive Suppliers for Ship to Control (STN) or Ship to Notification (STN) requirements.

More About You:

• Degree in Engineering
• Preferably 1-3 years relevant wafer fab experience.
• Candidates with no experience will be considered for junior role, training will be provided
• Candidates with relevant experiences in semiconductor/ automotive industry or Qualified 1st or 2nd party Auditor in VDA6.3, IATF16949 or ISO9001 quality standards will have competitive advantage in this application
• Understanding of 5 Quality Core Tools (APQP, PPAP, FMEA, SPC, MSA)
• Data Analytics skills using Tableau & Minitab or equivalent are crucial for this role
• Strong Problem Solving Skills
• Good communication & presentation skills
• Open to travel to supplier sites during work (15% to 20%)

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.Maintain and improve capacity planning methodologies to ensure accuracy

We are looking for a Quality Assurance Engineer to contribute to the delivery of large scale nation-wide projects.

• Opportunity to work on large scale digital transformation projects .
• Flexible work arrangements.
• Attractive remuneration package.

Responsibilities:

• Work with the teams to automate testing, applying risk-based strategy.
• Analyze and decompose complicated software systems and design a strategy to test these systems.
• Work with Product Owner and Business Analyst to refine product backlogs and its acceptance criteria.
• Conduct application performance and security testing to ensure we have a robust and secured system in place.
• Maintain regression test suite in QA nightly build, manage defect life cycle.

Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.
• Min. 3 years’ experience in software testing methodologies, both automation & manual testing.
• Strong analytical skills, meticulous attention to details.
• Experience with open-source automated testing framework like Playwright, Robot Framework, Appium, Selenium..
• Certified Software Testing Professional and/or Certified Software Quality Analyst and/or CREST/OSCP certification will be an added advantage.

Interested candidates may apply via email to [email protected](indicating Job ID J46164 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

The Assurance Senior is expected to lead various sizes of audit engagements which include planning, performing, reviewing of audit work performed by less experienced personnel and concluding the engagement.

Responsibilities

• Work closely with team members to execute the audit plan and ensure timely completion of the audit engagement
• Work closely with clients and manages their expectations to further nurture on-going client relationships
• Able to identify unethical behaviour and react based on the applicable ethical principles

Requirements

• A degree in Accountancy or equivalent professional qualification in Accountancy
• At least 3 years of external audit experience
• Good command of the English language
• Strong interpersonal and client relationship skills

The Team: Quality Engineering

The Quality Engineering team works in partnership with other Technology Functions and the Business to ensure quality delivery of our products. The team works in an Agile environment and is located globally. The team is independent in driving all decisions and is responsible for continuously improving customer experience, revenue growth and operations enablement through quick turn-around of development of our products with high quality.

The Impact:

As an Engineer-QA, you will make a significant contribution in building automation/performance solutions to test applications across Web/Windows/Mobile/API/Services platforms and framing efficient data comparison methods. Your challenge will be reducing the “time to market” for products without compromising quality, by leveraging automation and innovation. You will use a wide range of technologies and have the opportunity to interact with different internal teams.

What’s in it for you:

• Working with a team of highly skilled, ambitious and result-oriented professionals.
• Using a wide range of cutting-edge technology to innovate while testing.
• An ever-challenging environment to hone your existing skills in Automation, Performance, service layer testing, SQL scripting etc.
• A great opportunity to think and execute like a developer while performing the role of QA.
• Being a part of an organization which values ‘Culture of Urgency’ and ‘Shift Left’ approaches.
• A plenty of skill building, knowledge sharing, and innovation opportunities.
• Building a fulfilling career with a global financial technology company.
• Responsibilities:
• Develop automation/performance scripts that meet organization standards and build reliable automated regression suites
• Design and develop test plans, test cases based upon functional and design specifications, execute test cases and analyze and report test results to the teams
• Work in partnership with the development teams to deliver business functionality on time with required quality that meets the acceptance criteria
• Focus on building efficient solutions for Web, Services/APIs, and Database testing requirements.
• Participate in internal/cross team meetings, project scoping, functional reviews, test specifications, technical reviews for assigned projects in an Agile environment
• Participate actively in functional, system and regression testing activities
• Capture quality assurance data and metrics to provide insights and conclusions
• Estimate and perform risk analysis for quality delivery

What We’re Looking For:

• 3 -7 years of experience in software testing and developing automated scripts with understanding of coding and debugging procedures
• Experience in programming using Python/Java or other languages
• Experience in design and development of automated tests using automation tools (e.g. Python, Selenium, etc.) with exposure in testing across the application layers (UI/Service/Data layers)
• Experience in advising team to identify automatable test cases at different layers (UI, Services and Data layer tests). Ability to working with developers to build automation/performance friendly code is a plus.
• Experience in basic SQL/PL-SQL, writing queries and RDBMS
• Understanding of Behavior Driven Development (BDD) practices and experience in Safe Agile methodology is a plus
• Knowledge of testing in CI, DevOps, rolling deployment/upgrade model is a plus
• Knowledge of developing Test Plans and Test Cases, engage in Exploratory Testing, creating and maintaining Defect Reports
• Exposure to performance testing tools like HP LoadRunner/Performance Center/Storm Runner, JMeter is a plus.
• Strong communication skills and ability to produce clear, concise and detailed documentation
• Excellent problem solving, analytical and technical troubleshooting skills
• Bachelor's or higher qualification in Computer Science, Information Systems or equivalent is preferred

S&P Global has a Securities Disclosure and Trading Policy (“the Policy”) that seeks to mitigate conflicts of interest by monitoring and placing restrictions on personal securities holding and trading. The Policy is designed to promote compliance with global regulations. In some Divisions, pursuant to the Policy’s requirements, candidates at S&P Global may be asked to disclose securities holdings. Some roles may include a trading prohibition and remediation of positions when there is an effective or potential conflict of interest. Employment at S&P Global is contingent upon compliance with the Policy.

• Permanent position, Salary up to $10,000 with AWS + VB
• Working location: Jurong East MRT
• Business travel requirement: ~35% to Asia regions

Responsibilities

• Influencing and persuading senior site and sales heads to ensure compliance with site quality systems to the appropriate standards, thereby mitigating risks associated with non-compliance and poor quality.
• Maintain coordination with Group Quality to ensure a unified global approach to quality matters and provide consistent supporting documentation across different regions.
• Ensure quality performance by monitoring appropriate leading and lagging indicators on customer complaints, contributing to the best customer service while remaining competitive.
• Encounter complex problems involving a variety of important and relevant information, requiring recognition and resolution.
• Make frequent business decisions independently that impact different manufacturing sites and the overall business.
• Provide training and coaching to Sales and Sites on quality and customer-related needs

Requirements:

• Degree in Chemistry
• Minimum 10 years of experience in Quality.
• Preferably comes with consumer care background and proven experience overseeing the regions (Asia).
• In-depth understanding of the company’s products and market trends.
• Thorough knowledge of QA systems, GMPs, and regulatory requirements.
• Familiarity with guidelines such as ICH, FDA, EMA, MHRA.

Interested candidates please send your CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

Triton AI Pte Ltd

Registration Number: R1875181

EA: 21C0661

Location: Shenzhen, China

Salary: S$ 5,000 - S$ 8,000 (Gross Inclusive Overseas Allowance: Flight, Transport, Accommodation, Meals) + AWS + VB

*Manufacturing industry background (Electronic Consumer Goods, Semi-conductor, OEM/ODM) is preferred

Responsibilities

• Analyze and manage quality requirements, anomalies, and progress tracking.
• Formulate quality improvement progress with stage goals and follow-up on achievement.
• Monitor quality development approvals and acknowledgments.
• Risk management and coordination of customer complaints.
• Integrate market information and competitor intelligence.
• Negotiate rules for line acceptance.
• Follow up on process issues related to FATP stages.

Qualification:

• More than 5 years of experience in project quality management.
• Opportunity to be expat based 85% deployment in China.
• Ability to independently conduct meetings with foreign clients and deliver presentations.
• Experience in dealing with foreign clients preferred.
• Background in engineering or project management, with experience in new product development preferred.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Responsibilities

· Work closely with UAT Team Lead to ensure requirements and scope are clearly understood.
· Conduct UAT testing for business deliverables including new markets or products, application decommissions, operational improvements, and industry-driven regulatory changes.
· Assist Test Lead to track UAT issues, and publish daily EOD test status.
· Perform end to end testing with full understanding of the Business Requirements and Functional Specs.
· Communicate to UAT Team Lead on open issues and defects, run book execution progress, and risks.
· Ensure UAT artifacts and sign-offs are saved as the UAT audit trail.
· Learn and master TOSCA tool which is a software testing tool used to design test cases and automate end to end testing
· Able to understand business requirements/functional requirements and translate them into test cases.
· Able to execute test scripts, raise defects in tracking system (e.g. Jira) and follow through on defect resolution
· Able to collaborate with business and technology team to Ensure effective end to end testing.

Requirements

· At least 1+ years of experience in performing UAT testing or Business Analyst
· Strong communication skills both written and verbal
· Strong analytical skill
· Attention to details
· Has knowledge in at least on one of the following:
- Electronic Banking (e.g. internet banking),
- Channels Banking (e.g. File transfer service, SWIFTnet, SWIFT)
- Payments (e.g. Domestic Wire, Cross Border Wire, G3 Bulk Payment, G3 FAST)
- Liquidity (e.g. Sweeping and Pooling)
- Statements (e.g. MT940, Camt)
- APIs
- Knowledge or have experience on Test Cases Automation will be an added advantage
- Certified Tosca Test Design Specialist or Automation Specialist will be an added advantage

Job Description:

• Work closely with production team on internal production process and quality issue.
• Coordinate the review of quality procedures and manage the inspection standard on incoming, in process and outgoing inspections.
• Manage internal and external audit system as well corrective action reporting system.
• Handling customer complaints and ensure all corrective actions to customers are implemented and documented.
• Updating and maintaining records and documentation for the ISO 9001, ISO 14001, and ISO 13485 systems.
• Create a monthly report or summary of customer returns, RMAs, internal and external 8D, and updated specifications and procedures, along with OQA rejects.
• Perform another related task as assigned.

Job Requirement:

• Good interpersonal and communication skill
• With working experiences in quality engineering or in manufacturing preferred
• Good knowledge of ISO 9001, ISO 14001 & ISO 13485 quality system
• Knowledge and application of quality tools - SPC, PFMEA, Control Plans, CPK, 8D Report, GR&R and Minitab.

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629