Responsibilities

· Support to manage and supervise daily STQ activities such as yield and defects monitoring, incoming inspection and substrate evaluations.

· Develop good communication skills and coordinate with substrate's window person for any quality and evaluation feedbacks.

· Coordinate with production team for all substrate’s evaluations and quality feedbacks.

· Coordinate with warehouse in substrate incoming and clear inspection.

· Monitor media yield by substrate lot and trigger for FA if necessary.

· Develop a strong recognition for substrate defects.

· Support and manage substrate yield improvement activities.

· Publish and review evaluation results.

· Ensure compliance to ISO quality and safety standards

· Any other duties as assigned by superiors.

Requirements

· Degree or diploma in any engineering discipline

· Preferably with at least 3-5 years work experience in the semiconductor industry.

· Candidates without experience are welcome to apply.

To apply, please visit to www.gmprecruit.com and search for Job Code: 24637

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Job Description

• Assess the work hazards, submit risk assessments, mitigating measures and address all comments from the OIC prior to commencement of all works.
• Submit method statements where necessary to the OIC for approval before the commencement of inspection works.
• Plan, manage and co-ordinate all activities related to the work programmes as set forth in the Requirement Specifications.
• Prepare and submit all programmes, schedules (daily, monthly), monthly progress reports to the OIC.
• Check on the progress of works and ensure inspections are carried out according to schedule, unless prior approval has been sought to make adjustments.
• Ensure that all resources, equipment, etc are in good working condition at all times, and ensure timely and adequate covering for Inspectors who may be unable to perform their roles at any point in time
• Ensure that all inspection works carried out are in accordance with the Requirement Specifications and comply with any written law and statutory requirements in Singapore
• Ensure that the team of inspectors are equipped with the necessary equipment and that the inspectors are competent and well versed with the Authority’s standards and requirements.
• Ensure proper and adequate covering for Inspectors who may be unable to perform their roles at any point in time.
• Ensure that Inspectors’ daily inspection reports and other additional reports or findings are in order.
• Any other tasks as instructed by the OIC or Authority.

Job Requirements

• 5 years of relevant experience and knowledge in Project Management and Engineering Works to manage all the various types of works as set forth in the Requirement Specifications and to assume all the duties and responsibilities as set forth in the Contract
• A Degree in Civil Engineering recognized by the Professional Engineers (PE) Board or other qualifications acceptable by the Commissioner of Building Control for registration as Resident Engineer.
• A certificate in Pavement Construction and Maintenance which is awarded by the Building Authority (BCA), or equivalent and has completed a course on Code of Practice for Traffic Control at Work Zone.
• Able to communicate and write effectively in English; Minimally a Pass in English Language as first Language at GCE’ O level or equivalent.

Project duration : 1 Year +(1 Year Extension)

Work Shift : Day Shift & Night shift

Responsibilities:

• Support review and investigation of Hospital Incident Reports
• Provide secretariat support to meetings and committees (e.g. Total Quality Management Committee, Incident Review Committee for Serious Reportable Events Various Quality Assurance Committees) and see to the follow-up of all matters arising on all related activities.
• Provide secretarial and admin support for monthly Senior leadership’s Quality & Safety walkabout
• Support and coordinate the efforts in the annual review of departmental policies.
• Support and organize the annual Quality & Safety Day.
• Collaborate with external organizations for quality improvement efforts such as organizing Quality Conferences and cross-institutional improvement projects.
• Support the projects or poster submission to external award platforms.
• Coordinate MOH, AIC, or hospital initiated surveys (e.g. Patient Safety Culture Survey, Patient Experience Survey), analyze data, and follow up with improvement efforts.
• Undertake any special projects or initiatives as assigned by the supervisor and/or Head of Department.
• Any other tasks as assigned by HOD.

Requirements:

• Min. Bachelor’s degree, preferably in a healthcare-related discipline
• At least 2 to 3 years of relevant work experience in healthcare quality, preferably clinical quality

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Monday - Friday: 8.30AM- 6PM
• Location: Pioneer

Our client is a well-established manufacturer of hardware.

Responsibilities:

• Performing incoming & outgoing inspection of goods
• Ensuring inspection and test equipment are in good conditions and calibrated
• Performing calibration and maintenance for in-house measuring equipment periodically
• Documentation and verification of all inspections of goods
• To participate in Company’s continuous initiatives and training
• Other tasks as assigned by superior

Requirement:

• Min GCE ‘N’/ ‘O’ Level/ ITE Cert/ Diploma in related field
• At least 1 year of QA experience
• Basic computer skill(s): Microsoft Office
• Ability to work independently as it is a fast-paced working environment

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chua Xue Min (Joesefyn)

EA Personnel Reg. No.: R23113090

1. Develop and implement QA/QC inspection and testing protocols in accordance with specifications and regulatory requirements, ensuring comprehensive coverage for major projects.

2. Lead and manage a team of experts to uphold the Quality Management System, policies, and standards, ensuring seamless execution of all quality-related activities to meet specified standards.

3. Create and execute preventive measures and corrective actions for non-conforming products, including training to enhance awareness of quality procedures and individual responsibilities in the QA/QC process.

4. Plan and coordinate site activities, resolving drawing discrepancies and details as necessary.

5. Collaborate with consultants and subcontractors for inspections and attend meetings as required.

6. Work independently and as an integral part of the Site Management team.

7. Support the Construction/Project Manager in overseeing daily construction and site coordination activities.

8. Document and report any non-conformances, conducting root cause analyses as needed.

9. Monitor and ensure implementation of corrective actions and continuous process improvements.

10. Conduct inspections of in-progress and completed work to ensure compliance with project specifications and approved construction drawings.

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Quality Technician/ Technician
• Working Location: North East (Transport provided).
• Working Hours: Monday – Friday, 8.30 am – 6 pm
• Salary Package: Up to $2300 + AWS
• Duration: Permanent Role

Key Responsibilities

• Ensure that the products being manufactured are up to both company and consumer quality standards.
• Inspect and evaluate materials and components provided by suppliers.
• Responsible for testing and identifying the frequency at which continuous or random tests are undertaken.
• Support in carrying out investigations on products that need enhancements based on customer specifications.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Minimum NITEC qualification in an Engineering field.
• Hands-on experience with measuring equipment such as vernier callipers and micrometer.
• Familiar with CMM programming like PC-DMIS.
• Flexible to work beyond the normal working hours should the need arise.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67086 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Monthly Salary: Up to $3,700
• Contract Duration: 9 Months
• Shift: 12 Hours Day Shift
• Location: Jurong Island

Responsibilities:

• Conduct and analyze tests on finished products to support batch approval and rejection processes.
• Accurately record test analysis results following QA good documentation practices.
• Perform test analyses on non-routine samples, including retests, customer complaints, or rejections.
• Prepare chemical reagents used in the lab and maintain proper housekeeping (washing glassware, cleaning work areas, and equipment).
• Monitor and record inventory levels of chemicals and glassware, informing the QC Manager for replenishments as needed.
• Coordinate and send samples to external labs for additional testing (e.g., microbial analysis and heavy metals).

Requirements:

• Diploma/Degree in Chemistry with chemistry lab testing internship experience (Entry Level).
• Willingness to work a 12-hour day shift.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

We are looking for a QA Engineer (Manual Testing) to join a software company working on latest Web3.0 technologies.

• Software solutioning company in the FinTech industry.
• Salary package up to $4,500 + AWS + VB (~2 months).
• Dynamic working environment.

Responsibilities

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Perform thorough regression testing when bugs are resolved.
• Stay up-to-date with new testing tools and test strategies.
• Coordinate with development team/project management team for smooth SIT/UAT.

Requirements

• Tertiary education in Computer Science or related field.
• Min.3 years of working experience in Software Testing (Web Application/Mobile Application).
• Strong knowledge of software quality assurance methodologies, tools and processes.

Interested candidates may apply via email to [email protected] (indicating Job ID J45604 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Responsibilities:

• Support review and investigation of Hospital Incident Reports
• Provide secretariat support to meetings and committees (e.g. Total Quality Management Committee, Incident Review Committee for Serious Reportable Events Various Quality Assurance Committees) and see to the follow-up of all matters arising on all related activities.
• Provide secretarial and admin support for monthly Senior leadership’s Quality & Safety walkabout
• Support and coordinate the efforts in the annual review of departmental policies.
• Support and organize the annual Quality & Safety Day.
• Collaborate with external organizations for quality improvement efforts such as organizing Quality Conferences and cross-institutional improvement projects.
• Support the projects or poster submission to external award platforms.
• Coordinate MOH, AIC, or hospital initiated surveys (e.g. Patient Safety Culture Survey, Patient Experience Survey), analyze data, and follow up with improvement efforts.
• Undertake any special projects or initiatives as assigned by the supervisor and/or Head of Department.
• Any other tasks as assigned by HOD.

Requirements:

• min. Bachelor’s degree, preferably in a healthcare-related discipline
• At least 5 years of relevant work experience in healthcare quality, preferably clinical quality
• Experience in facilitating quality improvement workshops and conducting training such as Root Cause Analysis, and Plan-Do-Study-Act.
• Excellent planning, analytical, problem-solving, and communication skills.
• Personality traits: Highly motivated and self-driven with a positive can-do attitude and perseverance to overcome challenges.

Interested candidates please send your updated resume to:

[email protected]
Subject: Clinical Quality Executive

EA Personnel: Kate Leau Wei Xuan (R1552331)

Company Registration No.: 99C4599

• Develops, implements and maintains the Quality Management system according AS & ISO standards.
• Ensures all Corrective and Preventive actions are closed timely.
• Organizes and leads annual internal, external and customer audits.
• Organizes parts replacement for all customer’s complaint and feedback by resolving them in a timely manner.
• Ensures all measuring equipment are calibrated.
• Formulates, establishes a quality plan for outgoing inspection check on all parts.
• Reviews and to provide disposition for all items in the Quarantine area.
• Prepares Quality Performance metrics and reports to management.
• Drives supplier improvement plan/actions effectively.
• Conducts supplier process audits to drive process standardization, waste elimination, and drive improvements via statistic controls.

Job Requirements:

• Bachelor’s Degree.
• At least 1 years experiences in a similar manufacturing environment.
• Good knowledge in Quality Management System (e.g. ISO 9001).
• Strong and Competent Problem-Solving Skill and Statistical Process Control.
• Experience in managing the Customer Requirement and Complaint.
• Excellent communications skills, both verbal and written.
• Strong Microsoft Office skills (e.g. Excel, Word etc)

QA Engineer

IQC Product Testing

• Perform routine IQC check on cables & accessories to ensure received cables and accessories complies to the requirements stated in the respective technical data sheet and specifications.

• Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Supplier Quality Management

• Track supplier quality by means of in-coming inspection process, results update in SAP system and release inspected lots according to the usage decision defined.

• To generate supplier CAR and track for corrective action by liaising with the supplier.

Customer Complaint Management

• Handling of customers’ needs by providing accurate and timely information on enquiries related to cable testing, test reports and handling of customer complaints.

Reporting

• Preparation of ISIR test reports

• Maintain Product Certification Compliance Testing,

• Customer Complaints Handling & 8D Reports including updating records in SAP

• Prepare Quarterly Vendor Quality Performance Assessment Report

Requirements

• Experience in electrical / electronic product testing and qualification but not essential

• Knowledge in ISO 9001 2015 QMS standard and experience in Quality Assurance processes but not essential

• Able to operate lab equipment

• Prior experience in SAP system. Knowledge of cable product testing is an added advantage.

If you are keen to apply for this role, please click auto-apply
HRLinked Asia Search & Consultancy Pte Ltd (Registration No: 201910702W)

• Monthly Salary: Up to $3,700
• Contract Duration: 9 Months
• Shift: 12 Hours Day Shift
• Location: Jurong Island

Responsibilities:

• Conduct and analyze tests on finished products to support batch approval and rejection processes.
• Accurately record test analysis results following QA good documentation practices.
• Perform test analyses on non-routine samples, including retests, customer complaints, or rejections.
• Prepare chemical reagents used in the lab and maintain proper housekeeping (washing glassware, cleaning work areas, and equipment).
• Monitor and record inventory levels of chemicals and glassware, informing the QC Manager for replenishments as needed.
• Coordinate and send samples to external labs for additional testing (e.g., microbial analysis and heavy metals).

Requirements:

• Diploma/Degree in Chemistry with chemistry lab testing internship experience (Entry Level).
• Willingness to work a 12-hour day shift.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Responsibilities

• Implement, maintain and improve company’s QMS effectively based on ISO 9001, ISO 22716, Good Manufacturing Practice (GMP), Good Distribution Practice (GDP) and relevant Halal guidelines effectively.
• Contribute for and coordinate change management, risk management, continuous improvement and quality objectives monitoring with relevant functions.
• Prepare for and coordinate Management Review meeting.
• Conduct quality induction/quality-related training sessions for team members and other relevant parties when required.
• Ensure and maintain proper quality system document control including procedure review and improvement based on document system.
• Organise and conduct quality internal and external audits based on audit schedule and required ISO 19011 guidelines.
• Reporting of audit results and the proposed changes to QMS-related procedures when necessary.
• Evaluate the impact of quality deviations on operations and the need for corrective and preventive actions (CAPA).
• Utilise customer feedback, conduct customer satisfaction monitoring and report customer satisfaction results based on customer satisfaction system.
• Coordinate with QC for the investigation of product feedbacks from different regions, analyse quality problems and recommend problem resolution.
• Work with relevant functions to provide evaluation for the selection and ongoing performance of external providers; monitor and ensure required improvement of external providers based on external provider quality management (EPQM).

Requirements

• Bachelor’s degree in Science or Engineering (preferably in Quality Management, Cosmetic Science, Chemistry, Pharmacy, or relevant engineering).
• Preferably 2 years of working experience in quality-related functions. Fresh graduates are welcome to apply too.
• Good knowledge of tools, concepts and methodologies of QA.
• Experience in quality auditing, implementation of CAPA and quality improvement projects preferred.
• Experience in a GMP environment or knowledge of GMP and/or ISO 9001 a plus.
• Certifications such as Quality Auditor/Quality Engineer will be an advantage.
• Stringent compliance to procedures, guidelines, standards and regulations.
• Strong computer skills including Microsoft Office, QA applications and databases.
• Self-starter, good at working well independently with initiatives.
• Meticulous and detail-oriented.
• Good analytical and problem-solving skills.
• Effective planning, coordination, interpersonal and negotiation skills.
• Time management skills (scheduling, prioritising) to meet deadlines.

Responsibilities:

• Support review and investigation of Hospital Incident Reports
• Provide secretariat support to meetings and committees (e.g. Total Quality Management Committee, Incident Review Committee for Serious Reportable Events Various Quality Assurance Committees) and see to the follow-up of all matters arising on all related activities.
• Provide secretarial and admin support for monthly Senior leadership’s Quality & Safety walkabout
• Support and coordinate the efforts in the annual review of departmental policies.
• Support and organize the annual Quality & Safety Day.
• Collaborate with external organizations for quality improvement efforts such as organizing Quality Conferences and cross-institutional improvement projects.
• Support the projects or poster submission to external award platforms.
• Coordinate MOH, AIC, or hospital initiated surveys (e.g. Patient Safety Culture Survey, Patient Experience Survey), analyze data, and follow up with improvement efforts.
• Undertake any special projects or initiatives as assigned by the supervisor and/or Head of Department.
• Any other tasks as assigned by HOD.

Requirements:

• min. Bachelor’s degree, preferably in a healthcare-related discipline
• At least 5 years of relevant work experience in healthcare quality, preferably clinical quality
• Experience in facilitating quality improvement workshops and conducting training such as Root Cause Analysis, and Plan-Do-Study-Act.
• Excellent planning, analytical, problem-solving, and communication skills.
• Personality traits: Highly motivated and self-driven with a positive can-do attitude and perseverance to overcome challenges.

Interested applicants, please email your updated CV to [email protected] or WA 97527630 for more information.

EA Personnel No: R23116144

EA Personnel Name: Lim Ruo Yi, Rachel

Company Registration Number: Recruit Express Pte Ltd (99C4599)

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

Provide recommendations and timely updates on equipment degradation problems.

Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

Preparation of final inspection reports with all findings, abnormalities and recommendations.

Ensure quality of inspected items to meet project requirements and standards.

Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Read, understand project related ITP, procedures, specification requirements.

Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

Knowledge in welding inspection

Eligibility Criteria

Graduate Engineers with 3-6 years of relevant experience.

Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

Experience in Refinery and Oil & Gas must

Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

Work Independently and can work in Singapore and other countries.

Fluent Reading, Speaking and Writing in English.

Willing to commit 24 months contract/ project completion.

Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

Energetic & Result Orientated.

Note: Will be based in China for at least 6-9 months

Salary up to S$8,000

Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to integrate and resolve abnormal quality issues within the manufacturing process.
• Collaborate closely with cross-functional teams to implement effective solutions and preventive measures.
• Drive initiatives to enhance internal quality control procedures and improve process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead efforts to address and improve customer-reported quality issues, ensuring prompt resolution.
• Prepare comprehensive reports for stakeholders, detailing corrective actions and preventive measures.
• Develop and implement plans to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to improve inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a cohesive approach to achieving quality objectives.
• Oversee personnel-related tasks including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Supervise the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor's degree in a relevant field; advanced degree preferred.
• Minimum 6-8 years of proven experience in quality management, with a focus on manufacturing processes.
• Strong analytical and problem-solving abilities.
• Excellent leadership skills and interpersonal abilities.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience in collaborating with counterparts in China/ Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Quality Systems

• Supports overall maintenance of quality systems
• Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team
• Maintains the Mastercontrol and ISO document control system
• Maintains customer related documents such as Quality Agreement, PPAP
• Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

• Ensures effective implementation of all company quality policies
• Implements ISO and other recognized standards
• Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.
• Sets, communicates, and implements quality objectives in line with business goals
• Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.
• Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.
• Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

• Leads ISO quality standards implementation as Management Representative.
• Conducts and leads quality audits to specific quality standards.
• Leads customer related audits
• Conducts supplier audits
• Conducts internal audit investigations for product quality and process issues
• Responsible for ensuring timely resolution to audit findings

Training

• Provides training for all employees on basic quality and statistical concepts
• Provides training to appropriate personnel for updates and changes to quality policy
• Attends relevant external training sessions/courses and shares learning internally

We are searching for a dynamic Technical Project Manager to lead our platform team in developing and delivering next-generation solutions. This role requires a strong background and deep understanding of web3 technologies, Hadoop and blockchain protocols.

Responsibilities

• Define and communicate a clear product vision aligned with the company's objectives and market trends.
• Provide technical guidance and expertise to cross-functional teams, ensuring successful execution of product initiatives
• Implement agile methodologies and best practices to streamline development processes and accelerate time-to-market
• Conduct market research and competitor analysis to identify opportunities for differentiation and innovation.

Requirements:

• Strong technical background in computer science or software engineering, with experience in managing complex systems.
• Deep understanding of web3 technologies, including blockchain protocols, decentralized applications (dApps), and smart contracts.
• Proven track record of working effectively with engineering teams, both internally and externally, to deliver high-quality products on time and within budget.
• Excellent communication and interpersonal skills, with the ability to articulate technical concepts to non-technical stakeholders and engage with the Web3 community.
• Involve in writing Map Reduce jobs and giving input to HDFS for further processing.
• Responsible for data movement from client library and relation database to HDFS using Sqoop.
• Writing Pig Latin scripts and HiveQL.
• Managing and deploying on Hbase on Pseudo distributed cluster
• Experience across range of technologies/platforms/tools – Cloudera Hadoop, Spark, Hive, YARN, HDFS, MARIADB, Spark Streaming, Kafka, Spark SQL, Zeppelin, Grafana

Job Scope:

• Support review and investigation of Hospital Incident Reports
• Provide secretariat support to meetings and committees (e.g. Total Quality Management Committee, Incident Review Committee for Serious Reportable Events Various Quality Assurance Committees) and see to the follow-up of all matters arising on all related activities.
• Provide secretarial and admin support for monthly Senior leadership’s Quality & Safety walkabout
• Support and coordinate the efforts in the annual review of departmental policies.
• Support and organize the annual Quality & Safety Day.
• Collaborate with external organizations for quality improvement efforts such as organizing Quality Conferences and cross-institutional improvement projects.
• Support the projects or poster submission to external award platforms.
• Coordinate MOH, AIC, or hospital initiated surveys (e.g. Patient Safety Culture Survey, Patient Experience Survey), analyze data, and follow up with improvement efforts.
• Undertake any special projects or initiatives as assigned by the supervisor and/or Head of Department.
• Any other tasks as assigned by HOD.

Requirements:

• Min Degree in Healthcare Related fields / Nursing
• Prior experience in clinical quality would be an advantage
• Nurses keen to explore clinical quality are welcome too

Interested and qualified candidate , please send in your resume to [email protected]

Ivy Yong Shi Mei

R2198995

Recruit Express Pte Ltd 99C4599

Senior Assurance Manager

Key Responsibilities:

• Achieve monthly sales targets by upselling and cross-selling life, health & investment products to clients.
• Provide high-quality service and professional financial advice.
• Ensure all sales activities comply with internal and external regulatory standards.
• Identify new business opportunities to drive growth, expand the client base, and maximize revenue.
• Collaborate with the sales team to develop and implement effective sales strategies and marketing campaigns.
• Stay informed about industry trends, market developments, and competitor activities to leverage emerging opportunities.

Qualifications and Skills:

• Minimum of 1-2 years of experience in insurance sales.
• Strong sales drive and commitment to achieving income and goals.
• Excellent communication, negotiation, and interpersonal skills, with the ability to build strong relationships with clients and stakeholders.
• Thorough knowledge of insurance products, industry regulations, and market trends.
• Analytical skills to interpret data and provide strategic recommendations.

Responsibilities:

• Develop and implement quality control processes and procedures to ensure product quality and reliability.
• Conduct inspections and tests on incoming materials, in-process components, and finished products to ensure compliance with quality standards.
• Monitor and analyze quality data to identify trends and areas for improvement.
• Collaborate with cross-functional teams to resolve quality issues and implement corrective actions.
• Manage and maintain the company's quality management system.
• Develop and deliver training programs on quality control and assurance.
• Conduct internal audits to evaluate the effectiveness of quality systems.
• Participate in customer audits and address any quality-related concerns.
• Stay updated on industry best practices and regulatory requirements related to quality control.
• Support continuous improvement initiatives to enhance overall product quality and customer satisfaction.

Requirements:

• Diploma in Electronics/Electrical Engineering or it's equivalent
• Min one related working experience
• Knowledge in certification and product testing is an added advantage
• Able to work in a team

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Perform inspections and tests on welded, metal, and machined components to ensure compliance with quality standards and specifications.
• Conduct visual inspections to identify welding defects and ensure proper welding techniques are used.
• Utilize various inspection tools and equipment to measure dimensions, tolerances, and surface finishes.
• Record and document inspection results and prepare inspection reports.
• Collaborate with cross-functional teams to address quality issues and implement corrective actions.
• Ensure compliance with regulatory requirements and industry standards.
• Support continuous improvement initiatives to enhance overall quality and customer satisfaction.

Requirements:

• Min Nitec in mechanical engineering or it's equivalent
• At least one year related working experience
• Possess a valid Welding Inspector Certificate (CSWIP)
• Experience in Machining, Metal stamping, fabrication
• Knowledge in auditing skill for ISO9001

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Responsibilities

• Check for completeness of job files received from Operations.
• Check the customer’s billing requirement based on the specific job file, customers’ contract or customers’ standing instructions.
• Check and clarify the pricing, customer information and job information to ensure billing accuracy.
• Enter the billing information in the SAP System and generate the invoice for Operations checking and endorsement.
• Follow-up on unbilled jobs and ensure it is completed within a given timeframe.
• Prepare and submit testing reports and dispatch invoices when required.
• Support Billing Manager in KPI monitoring and other weekly/ monthly reporting.

Job Requirements

• Minimum Diploma in either Accounting, Business Administration, Finance or relevant field.
• Minimum 3 years in either Accounts Receivable, Billings or Customer Service would be an advantage.
• Meticulous and have an eye for details.
• Must know SAP System

Interested applicants, send in your resume to: [email protected]

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo Yan Ni | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W