Job Responsibilities

• Liaise between the various disciplines and departments to ensure works are carried out efficiently
• Ensure that the project meets the required specifications and standards
• Study and understand project spec, scope of work and scope of supply
• Assist to ensure that resources arrived are in accordance to the orders and requests raised
• Ensure that the resource allocations for production and project team are on time to ensure construction works can proceed on time
• Monitor and ensure that budgets are updated
• Support all HSE and QA/QC efforts and ensure works are in compliance to such efforts
• Assist in the preparation of reports to update the management on overall outyard activities
• Attend Client & Production Meeting together with Project Managers
• Tracks potential variations for the Projects and to follow up with Commercial
• Monitor progress status of individual Disciplines
• Submits Project Execution Plans for Tender Submission
• Any other ad-hoc duties assigned by Superior

Job Requirements

• Diploma/Degree in Mechanical Engineering
• Min 5 years of experiences in Marine Project Management holding the same designation
• Good management and leadership skills
• Have own vehicle to travel to site inspection when needed
• Able to travel overseas for short trip when required

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.

Support production line issues with appropriate and permanent corrective solution, as and when necessary.

In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.

Establish investment proposals and projects in order to utilize best available practice and competence.

Support managements' directives and projects as and when needed.

Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Candidate working in Cell PD is responsible for development new cell processes or optimize existing processes in Solar cell Manufacturing.

Candidate will need to work with external suppliers to bring in new materials or integrate new processes into the current cell processing line. Candidate will also work on continuous improvement projects to improve the cell efficiency and cost of a solar cell.

Candidate with semiconductor or solar cell background would have an added advantage.

Able to mentor junior cell PD engineers and be a role model for them.

Depending on the competencies developed, process development will be required to be rotated to different departments as required by management.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline)
• 5 years or more working experience
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or PV.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

Job Description

1. Authorities's approval application.
2. Drafting of CAD drawings.
3. Liaise with Civil PE for design calculations.
4. Liaise with supportive vendors for follow up documents.
5. Update operations with latest different site's information.
6. Site meeting/coordination.
7. Other ad-hoc duties.

Job Requirements

1. Degree in Civil/Mechanical/Electrical Engineering.
2. Required AutoCAD Skill.
3. Fast learner, Multi-tasking and able to work independently.
4. Fresh graduates are welcome to apply.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Job Description

• Plan and execute all scaffolding works with accordance to SS:CP14
• Liaise and coordinate internally with Clients and Contractors
• Comply to Company’s safety policy and safety management system and to enforce legislated safety requirement and the Company’s safety rules and regulations at site
• Supervise workers at site
• Identify the type of required scaffolding for the job

Job Requirements

• NITEC/Certificate in Marine Metal Scaffolding Certificate for Supervisors (MMSC)
• Minimum 3 years of experience in marine and offshore industry is preferred
• Possess good knowledge of WSH Scaffolding Regulations/Code of Practices, Association of Singapore Marine Industry (ASMI) Scaffold guidelines
• Must have Marine Metal Scaffold Supervisor course
• Strong planning, interpersonal and communication skills

The company's job contracts mainly Interior works & Mixed construction works

following qualifications are suitable & prefered

batchellor degree in civil engineering or Diploma in civil engineering with work experience

in autocad Drawings, basic Designings and project coordinates & able work with team members

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 3 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Position: Project Engineer

Job Highlights

· 5.5 Days Work Week

· Familiar In Steel Structure

· To supervise and manage all related matters with regard to the day to day civil activities on the project with the objective of meeting the schedule quality and safety objectives .

· To ensure all works are carried out in line with SCDF health and safety standards in order to provide high quality works in safe and efficient manner.

· Drafting using Tekla and Auto Cad

Job Requirements

· Good communication skills

· Conduct regular site visits to ensure compliance with contract specifications and design plans

· Project Planning , coordination and supervision of technical aspects of construction projects

· Conduct joint inspection with RE and RTO

· To assist the Project Manager in the daily execution of work.

· Attend Meeting if necessary

· Arrange Heavy Equiptment /transportation if necessary

· Provide weekly update to the Project /Site Manager

· Able to plan/coordinate site works and resolve drawing details and discrepancies

· Tendering & Proposal

· Ad-hoc assignment as required by the management

Qualifications and Experience

· Minimum with 3 years of experience at construction sites

· Pre-planed prepare construction schedule ,coordinate activities

· Candidate must possess at least , Bachelor’s Degree / Professional Degree , Master’s Degree in any field

· Liaise with both internal and external parties for efficiency

· Other ad-hoc duties as assigned by Project Manager

· Prefer knowledge in Tekla , Auto CAD

· NOT for BIM Modeller Application

·

Roles & Responsibilities

FIRECONTROL TECH is a well establish engineering company dedicated to providing practical and cost-effective design & built solutions for industrial applications to our client from conceptual to detailed design to installation to authorities permitting and project construction.

To support our growth, we require Project Engineer to:

· Review drawings and scope of works, resolve technical issues with clients and subcontractors.

· Monitor overall site progress, schedule critical work paths to avoid delay in project schedule.

· Ensure specifications are being followed and work is proceeding on schedule.

· Perform day-to-day site management, supervise, monitor work progress and site workforce.

· Oversee quality control, health and safety matters.

· Attend sub-con meetings and technical meetings.

· Prepare and submit weekly and monthly progress/construction reports.

Requirements:

· ITE/Diploma/Degree in Engineering.

· Minimum 1-year relevant experience in building construction environment.

· Basic knowledge in construction planning.

· Proficient in MS Office and schedule reporting.

· Ability to work independently and within a team.

· Knowledge in work schedule planning software will be added advantage.

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Production Engineer Responsibilities:

• Supervising the manufacturing processes, ensuring quality work is done in a safe, efficient manner.
• Liaising with other engineers to develop plans that improve production, costs, and labor required.
• Diagnosing problems in the production line and providing recommendations and training.
• Establishing safety procedures and protocols that take the workers' well-being into account, and that also minimize the carbon footprint.
• Keeping abreast of advancements in engineering and production, and sharing knowledge with co-workers.
• Identifying, documenting, and reporting unsafe practices.
• Drawing up production schedules and budgets for projects.
• Scheduling meetings with relevant departments and stakeholders.
• Analyzing all facets of production and making recommendations for improvement.
• Obtaining any materials and equipment required.

Job Description:

• Safely and efficiently perform all duties assigned and report to the OIM on the day-to-day management and long-range stewardship of the rig
• Efficiently manage subordinates and ensure all operations are carried out in a safe and conscientious manner and responsible for correcting or notifying responsible persons of any unsafe acts and/or conditions which exist
• Provide support, safety leadership and on-site supervision of all marine activities on the rig
• Maintain and update rig documentation records to ensure all actions are carried out and completed in a timely manner and in accordance with policies and procedures to minimize potential downtime for deck, marine (incl. Jacking and Anchor Systems), safety equipment, and non-drilling related lifting equipment and to maintain structural and systems integrity
• Audit rig documentation records for proper actions and closeouts and rectify for areas under direct supervision
• Schedule inspections and ensure all certification of deck, marine (incl. Jacking and Anchor systems) and safety equipment is in place and maintained in good order in accordance with regulatory and company policy; follow up on and report any damage or faults to OIM
• Ensure compliance in relation to all certification for the unit regarding flag state, Classification Society and Local State Regulations (as applicable) is in place and up to date
• Manage all third-party inspection activities as required under the maintenance system and/or regulatory requirements and ensure all equipment is inspected, fit for purpose and has the required certification and documentation
• Perform or coordinate operation of; deck, marine (incl. Jacking and Anchor systems), safety equipment, non-drilling related lifting equipment & marine/cargo lifting operations
• Monitor costs and correspond with OIM regarding overall costs and budgeting for systems of deck, marine/cargo (incl. Jacking Systems and Anchor systems), safety equipment and (none drilling) lifting equipment
• Ensure operations are planned, organized, supervised and executed in accordance with well programs, rig move plans, client requirements and contractual obligations
• Maintain adequate inventory levels for equipment under area of responsibility: order any stock in a timely and cost-effective manner.
• Coordinate supply vessels, helicopter logistics and other vessel activities involving the rig.
• Direct standby Vessel as required and ensure communication of information critical to operational effectiveness and rescue is maintained.
• Responsible for the correct loading and line up of bulk materials, hydrocarbons and other bulk chemicals on board.
• Monitor and manage load conditions to ensure compliance with operating procedures and design limits for the unit and lifting equipment.
• Ensure daily stability calculations, including keeping record of any lightweight adjustments, are updated, completed and recorded.
• Ensure any rig modification involving welding/hot work complies with company policies and procedures
• Ensure emergency preparedness of equipment (lifesaving & firefighting facilities) and train and mobilize firefighting / emergency crews.
• Responsible for conducting all safety drills (other than drilling) and supervise rig abandonment procedures calmly under direction of the OIM
• Responsible for and familiar with location and use of alarm systems in case of fire, abandonment and other emergencies.
• Supervise emergency response teams and deck crew during emergency and bad weather conditions as outlined in the Station Bill and ERP and assist other departments as needed.
• Ensure waste segregation and disposal is carried out as per company, client and location requirements and all environmental related documentation is maintained in good order.
• Ensure proper storage and transfer of hydrocarbons, fuel oils, greases paints and other flammable materials and availability of spill kits.
• Maintain housekeeping in general areas of the rig. Specifically, but not limited to living quarters, galley, hull appearance (internal/external), main deck areas and helideck.
• Keep abreast of operational/technical bulletins pertaining to area of responsibility and ensure all requisite documentation is kept up to date.
• Provide comprehensive handover notes and ensure all subordinate disciplines are communicating handovers with their respective relief.
• Responsible to ensure performance management and discipline and grievance process for subordinates is effectively implemented and conducted in accordance with Company policies and procedures.
• Support, encourage and mentor crew members to ensure they have the skills and opportunity to build job specific competencies and complete training requirements.
• Ensure the job specific training matrix requirements and competency training for all subordinates is completed within required timeframes.
• Personally achieve and maintain required standards for own training and competency requirements for job role.
• Provides technical support and assists the operations as necessary during casing jobs, cementing, transferring of bulk materials, etc., to ensure these operations are carried out in a continuous uninterrupted manner.
• Function as the safety officer in the absence of the Safety and Training Specialist.
• Supervise the Crane Operator and Roustabouts, painters and miscellaneous maintenance crew.
• Coordinate with the Driller to organize and plan all deck operations to ensure drilling operations are not delayed by material and equipment requirements
• Supervise all connections when transferring bulk fluids from or to supply boats.
• Supervise safe tank entry procedures ensuring 100% compliance
• As HLO (Helicopter Landing Officer), supervise crew change by boat or by helicopter.
• Carry out appraisals for subordinates, and any other tasks requested by Rig Management
• Work with assigned assessor to complete Competence Management System and where necessary, identify any areas for development. Provide demonstrable evidence to complement the assessor outcomes
• Assess personnel within their area of responsibility. Provide guidance on the Competence Management System and assist with the collation of appropriate evidence ensuring assessments conducted are legible, authentic, current, sufficient and reliable to meet the requirements of Internal Verification.
• Abide and promote Life-Saving rules at all times
• Understand your responsibilities during an emergency and participate in all emergency drills
• Actively participate in Behavior Based Safety (BBS Card) program

Job Specification

• Minimum O levels or equivalent.
• Previous experience working in the capacity as a Barge Master and on similar MODUs
• Experience in a similar role within the oil and gas, offshore, shipping, or related industry.
• Experience in operation and management of offshore marine systems, including jacking systems, anchoring, mooring, ship handling, basic seamanship, damage control equipment and procedures, and environmental safety
• Experience in marine environmental and hazardous material regulations and procedures
• Experience in cargo operations and effects on vessel ballast and loading
• Knowledge of ocean weather and sea state conditions affecting rig operations
• Knowledge of all regulations and laws as related to offshore drilling operations in the area of operations
• Proficient computer skills in office software and company proprietary software
• Effective communication skills: Fluency in written and spoken English required
• Excellent leadership, communication and management skills.
• Ability to develop good working relationships with other supervisors through interaction and participation in meetings.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Job Responsibilities: -

1. Supervise motor inspection and overhaul service work to ensure efficient and effective maintenance work, compliance with safety regulations and quality standards.

2. Conducting motor assembly, testing, and problem solving. Determine the motor status based on test results and issue motor test reports.

3. Improve work method, quality management systems, and workflow to enhance maintenance processes.

4. Provide technical support for motor pre/post-sales activities, including technical knowledge training for customers, ensuring customer satisfaction.

5. Develop and implement motor inspection, maintenance, and diagnostic plans for products, providing field technical guidance and process supervision.

6. Perform motor fault diagnosis, including vibration analysis, temperature monitoring, electrical testing, and insulation checks, etc.

7. Analyze and resolve motor-related problems to ensure optimal performance and reliability.

8. Train and upgrade the skills of workers in motor maintenance processes, including testing, assembly, insulation, repair, etc.

Requirements:-

1. Degree in Electrical Engineering or related field (preferred). Hands-on experiences in motor overhaul maintenance and technical support.
2. Possess years of experiences in motor repair and testing, diagnostics and troubleshooting.
3. Familiar with the maintenance, overhaul and testing of various high-voltage and low-voltage motors.
4. Preferably with class-3 driving license.

Job Descriptions

• Schedule maintenance activities for chillers systems, keeping track of maintenance works with follow up actions for chillers.
• Ensure all maintenance works are carried out according to prescribed checklist and schedule
• Responsible for testing & commissioning/ fine tuning of new chiller with minimal guidance, such as coordinate project execution at site, witness FAT and conduct SAT to ensure the chiller operating conditions according to target performance.
• Ability to interpret as-built documents, schematic drawings, technical documents as well as analyze operating data from chillers and know how to identify and repair any issues that arise.
• Responsible for on-site management of the chiller overhaul/ repair works and supervise subcontractor work; effectively control the service quality and progress.
• Preparation of service report for each service assignment.
• Assuage dissatisfied customers on service issues such as provide prompt and effective resolution to technical problems on chiller and recommend preventive measures.
• Preparation of risk assessments prior and ensure safety procedures and conduct during service and repairs.
• To ensure all works carried out safely and/or in accordance with safety procedures.
• Any other tasks, when required by Department Manager.

Job Requirements

• Minimum ITE Certificate with Merit in Engineering or Diploma in Mechanical Engineering.
• Minimum 3 years of relevant chiller experiences.
• Preferably Singaporean or SPR
• Able to guide and troubleshoot HVAC faults especially modular screw chillers, centrifugal chillers and absorption chillers.
• Good communication skills both verbal and written as well as preparing service reports.
• Has a good safety mindset and displays good WSH behavior.
• Short term working at overseas maybe required.

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday
• ※ Most of the time they are outside of the office

Introduction:

Yoshimura Food Holdings is a leading Japanese company with a diverse portfolio that includes processed foods, agricultural products, and seafood, with a strong commitment to quality and sustainable practices. With a legacy of excellence and publicly traded on the Tokyo Stock Exchange, Yoshimura is dedicated to provides premium seafood products renowned for its quality and taste.

Actively hiring Senior Sales Executives to join our growing family to drive growth and building lasting relationships. Join us in shaping the future of foods. Explore opportunities at Yoshimura today!

Responsibilities:

• Manage clients’ relations and build contacts with potential clients for new business opportunities.
• Responsible for planning and implementing market penetration strategies and sales targets and for building strong relationships with existing clients.
• Identify leads and lead new business opportunities to expand distribution channels / networks.
• To exceed or achieve monthly sales targets / new business development served in the assigned area.
• Track, monitor and analyse products, channels and customers sales trends in order to maximise sales opportunities and achieve desired sales results.
• Carry out and plan other sales and marketing functions to increase efficiency.
• Take initiative in implementing best practices to perform duties.

Requirements:

• 3 years of relevant experience in foodservice sales or business development within FMCG or Seafood industry
• Proven sales experience meeting or exceeding targets
• Proven ability to drive the sales process from plan to close
• Proficient in Microsoft Office Suite (Excel, Word, PowerPoint)
• Able to multi-task and work independently
• Strong interpersonal and communication skills
• Min. Diploma in business or related field

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

- project management: Liaise with contractor to set up charger including Router , LAN or SIM. Link API to platform.

- ⁠Repair & maintenance Troubleshooting , replacement of parts, liaise with factory; logging & data retrieval.

- ⁠planning & leads a team for charger maintenance. Offer service to customer.

- ⁠Apply LTA technical requirements .

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Requirements:

1. At least a diploma in civil engineering and 5 years working experience in civil engineering project.

2. Must be able to co-ordinate with clients, inspectors, suppliers, workers and subcons.

3. Able to interpret drawing, able to generate shop drwing and cutting list.

4. Must be able to commit Saturday workdays.

5. Able to fulfill task with minimum supervision.

6. Ableto schedule daily work activities, deployment with workforce and resources.

7. Able to write Method of Statement adn Risk Assessment.

• Upkeep record of department equipment/assets.
• Execute both static and dynamic measurement such as dimension control and flow measurement not limiting to shore/ship tanks, piping, flow meters and instrument validation for custody transfer purposes.
• Process data collected and prepare all necessary reporting for review.
• Assist in the development and training of staff to required level of expertise.
• Ensure that all operations are conducted within client’s health and safety requirements.
• Assist in the implementation of department Quality system per the QA Manual.
• Perform any other task that may be assigned from time to time by Management.
• All jobs done in accordance to SGS Standard Procedures and/or Local Procedures where applicable.

Requirements:

• Diploma or equivalent in the field of Electrical or Electronic Engineering discipline
• Preferably 2 years of working experience
• Good computing skills and knowledge
• Possess local class 3 driving licence will be an added advantage
• Good communication, negotiation and interpersonal skills
• Good team player, works well under pressure and able to challenge status quo
• Able to work independently and to coordinate several activities simultaneously
• Able to ensure that process flow and work delivery is accurate and timely
• Able to give best customer care and services
• In addition, an added advantage for candidate who possess one or more of the following skills as follows:
• Instrumentation validation/verification/flow measurement
• Dimension control measurement via Total Station or theodolite
• Good computer knowledge in MS Office particularly Advanced Excel
• Any 3D software knowledge, autocad, etc…
• Coding or programing capability