We advance science so that we all have more time with the people we love.

The Position

• This position supports the implementation and optimization of an integrated operation and maintenance strategy of Utility Systems within RSTO, through close partnership with internal and external stakeholders, to support drug substances manufacturing operations.

Key Responsibilities

• Responsible for the day-to-day monitoring/operation and preventive/ad-hoc repair and maintenance of all utility and manufacturing equipment/systems including the calibration of instrumentation and electrical installation/equipment serving the entire manufacturing facility and the execution of all job orders on shift on a 7 days per week and 24 hours a day basis.
• Carries out work and job orders relating to routine, preventive and ad-hoc calibration, repair and maintenance of utility and process equipment, instrumentation and electrical installation.
• Perform first level troubleshooting and maintenance on shift.
• Able to support and provide handyman service
• Receive and top-up chemicals in Utilities RO Systems and Waste Water Systems
• Perform salt loading (manual and overhead hoist) and brine solution preparation.
• Perform movement of CIP 100, CIP 200, Caustic chemicals
• Perform shutdown and restart to Utilities Systems in accordance with safety and quality requirements, to support maintenance and project activities.
• Provides mechanical support to manufacturing, utility and engineering services during routine and shutdown maintenance work; and product switchover in support of plant operations.
• To actively participate and perform workplace 5S housekeeping, upkeep GMP Area facilities fitness standard, by cleaning and painting indoor and outdoor utilities equipment such as wastewater plant, water tanks, RO Skids, drain trenches, piping systems, etc.
• Carry out improvement projects on operations and cost savings
• Monitor facilities and utilities systems via BAS/PCS and attend to alarms.
• Carries out any other work and task as directed by SMEs/Engineers/Supervisor/Manager

Who You Are

Education Requirements

• Min. NTC 3 and Above (or equivalent relevant work experience) is preferred
• MOM accredited WAH course for Workers is preferred
• MOM accredited course of handling of chemicals and hazardous substances is preferred
• MOM accredited Confined Space Entrant is preferred

Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirement and execute task given by team leader.
• Attend to ad hoc job required for train, bus and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Join GSK Process Technician Apprentice Programme – Singapore - 2025: Help us get ahead of disease together

GSK Apprenticeships are full-time entry level opportunities that offer ITE graduates the opportunity to begin their career while studying towards a Work-Study Diploma in Chemical Process Technology fully funded by GSK.

Prior Education requirements: Nitec in Chemical Process Technology (GPA>2.0) OR Higher NITEC in Chemical Technology OR Higher NITEC in Biotechnology, Fresh ITE graduates within 5 years of graduation or ORD.

Language requirement: Written and spoken fluency in English

Other requirements:

• If offered a position the candidate must be willing to enroll, and meet entry requirements, with the partnering educational institution, in the preferred related instruction course
• Must be able to commute daily to the GSK manufacturing facility and to the education institution when required for classes

Start date: January 2025

Application deadline: We recommend you apply as soon as possible. We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

Are you looking to gain a head start in your career where you can help positively impact the health of billions of people? Apply for the Process Technician Apprentice Programme today!

We are looking for highly motivated ITE graduates with an interest in science and engineering who are looking to kickstart their career in the pharmaceutical industry. The apprenticeship programme allows you to develop hands-on technical skills while continuing your education.

Working at our pharmaceutical manufacturing site, you will help to ensure we have the latest, safe, efficient, and reliable processes and equipment to deliver life-saving medicines and vaccines to people in 90 % of the world’s countries. This role will enable you to develop your skills in an industry that’s making radical changes to the way it develops and manufactures products.

Ahead together with tailored training and career development

This entry-level development opportunity offers you the chance to study towards nationally recognized qualifications while gaining hands-on, paid on-the-job training. Our apprentices will take up studies towards a Work-Study Diploma in Chemical Process Technology while working at a GSK Pharmaceutical Manufacturing facility in Singapore.

You will spend time working in our manufacturing facility learning how to operate and maintain the different equipment and utility systems that support our pharmaceutical production from our in-house industry experts . You will learn safety and risk management to ensure all equipment is operated safely and efficiently.  Over the 30 months of the apprenticeship, you will have a personal training programme to help you develop and progress.

What will you do?

As a process technician apprentice, you may get involved in the following activities:

• Learning how to operate equipment in the manufacture and packaging of our pharmaceutical products
• Supporting the operation of solvent recovery and effluent treatment processes that support manufacturing processes
• Supporting routine preventive maintenance activities
• Get involved in project activities
• First touch engineering - root cause analysis and solving breakdowns
• Data collection, analysis and trending to identify improvement opportunities and implementation of change
• Assisting in new product and equipment introductions
• Ensuring quality, safety and accuracy in all that we do

What do we offer you?

• A competitive salary
• An annual bonus based on company performance
• Access to healthcare and well-being programs
• Employee recognition programmes, which reward exceptional achievements
• On-the-job experience and formal and informal training and development, delivered through a mixture of coaching, mentoring and formal training programmes
• Fully funded next level education!

Apply now: https://jobs.gsk.com/en-gb/jobs/402355?lang=en-us&previousLocale=en-GB

We want GSK to be a workplace where everyone can feel a sense of belonging and thrive as set out in our Equal and Inclusive Treatment of Employees policy. We’re committed to being more proactive at all levels so that our workforce reflects the communities we work and hire in, and our GSK leadership reflects our GSK workforce.

Need help with your application?

Please email us at [email protected] and let us know how we can help you.

#ApprenticeSG

#ManufacturingApprenticeSG

The position holder is responsible for maintaining and servicing a range of well-known diesel generators ranging from 10KVA to 4MW and both HT and LT generators. Reporting to your team Senior Service Tech or Team Senior Service Engineer / leader

Key Tasks:

• Carry out fault finding and diagnosis to a range of diesel generator sets.
• Resolve electrical and mechanical engine problems
• Replacing electrical and mechanical components
• Carry out Full engine servicing
• Carry out site testing, inclusive of load bank testing for both HT and LT generators
• Customer liaison, update and ensure complete customer satisfaction.
• Good housekeeping of both customer sites and company vehicle
• Adhere to company health & safety standards

Requirements

Education

• Minimum Diploma/ITC/NTC in Mechanical or Electrical Engineering - LEW an added advantage
• SEC/SEC (K) Certificate if applicable

Knowledge / Experience / Others

• Previous experience working on Diesel Generators
• With minimum 3 years hand on experience on Diesel Generators
• Completed an apprenticeship in Mechanical Engineering / Electrical Engineering / Diesel or Plant Fitting, or have a relevant qualification in one of those courses.
• Ideally strong knowledge of diesel generators such Cummins / Volvo / Perkins / Mitsubishi / John Deer / Droman / Deutz and any other brands
• Possess a valid Singapore driving license .

Personal Competencies

• Able to use own initiative as well as working as part of a team
• Good customer service and communication skills

Addcel has been delivering deep value to clients across Pharmaceutical, Data Centers, Semi-con and Oil & Gas industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation, we take pride and passion in all that we do.

As a Maintenance Technician with Addcel, you will be responsible for:

• Performing preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensuring completion of all preventive and corrective maintenanc, documenting all service reports from vendors
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usgae
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involved in internal and external audits when required
• Any other duties as assigned

A successful candidate for this role will possess:

• Higher Nitec/ Diploma in Electrical/ Mechanical/ Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands-on experience in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Physically fit and able to work at height with MEWP
• Able to support after office hours and weekends when needed
• Well versed in Microsoft Office applications
• Able to read and interpret schematics

Job Description

• Perform non-destructive tests (NDT) and determine product acceptability to the authorized limits of the NDT level obtained in accordance with the prescribed methods and procedures
• Perform NDT Inspection duties in support of customer parts
• Record, organize and evaluate test results and generate NDT reports
• Perform verification of In-coming / In-process dimensional inspection
• Perform Final Dimensional and Visual Inspection
• Maintain all measuring equipment in QA Department
• Ensures compliance to all radiation safety rules and regulations and provides protections to self and others during testing
• Dispose of hazardous waste in accordance with Environmental Regulations
• Maintenance and calibration of all NDT equipments
• Buy off and maintain NDT consumables and ensure inventory is up to date
• Coordinate NDT Inspection workload according to priorities, efficiency and cost
• Participate and drive any projects assigned
• Take on any task assigned by superior

Requirements

• Minimum Technical Certificate/NITEC in Engineering (Mechanical/Precision) or equivalent
• At least two years working experience in related field
• Able to perform measurement using micrometer, surface roughness, bore gauge and NDT Level II (At least LPI, MPI & UT)
• Required language(s): English (both spoken and written)
• Must be computer literate
• Positive working attitude & self motivated

Established fire-fighting company looking for Service Technicians.

- Training will be provided

- Perferably with Class 3 Driving License

- Able to work overtime

- Secondary or ITE welcome

- Preferably staying in Clementi or Jurong area

Interested please email with resume to [email protected]

SUMMARY:

• Responsible for ensuring the safe, punctual and cost effective delivery of services by managing the flow of bus captains and vehicles along the route.
• Liaising with Bus Captains, Interchange Supervisors, Depot Supervisors and maintenance personnel to resolve issues and restore service levels.
• To ensure that the highest levels of service are provided to ensure a customer centric approach is taken when dealing with service irregularities.

PRINCIPAL RESPONSIBILITIES AND AUTHORITIES:

• Monitoring and controlling services to ensure punctuality, or service headways are maintained;
• Communicate with bus captains and Interchange Supervisors to enable them to effectively deliver a reliable and safe service to the customer;
• Communicating in a polite, professional and courteous manner at all times to employees and external parties;
• Manage on-road issues that potentially impact on service deliver;
• Maintain a close working relationship with response agencies such as fire and police;
• Responsible for reporting on punctuality concerns in relation to service issues;
• Continually liaise with supervisors, particularly the Interchange Supervisors and Depot Supervisors to ensure that services operate in accordance with timetabled instructions;
• Ensuring that the first and last services on all routes run to the scheduled timetable;
• Deal with Major Incidents and Security Issues in accordance with the respective procedures;
• Responsible for building a strong working relationship with the maintenance team to ensure effective change overs in relation to vehicle breakdowns;
• Undertake any additional duties as requested by the CFMS Manager, and
• Undertake any training and development activities as requested by the CFMS Manager.

SKILLS, EXPERIENCE, CONDITIONS SPECIFICATION:

• This position involves shift work and work on weekends. You will be required to work such hours as deemed necessary to provide appropriate coverage.
• Commercial awareness and an understanding of the LTA contract regime;
• Good geographical knowledge of the Singapore area;
• Excellent communications skills, both verbal and written.
• Ability to effectively communicate over the phone and two-way radio to a culturally diverse workforce and community;
• Computer literate and the ability to be trained in a GPS real-time vehicle management environment such as the LTA CFMS system, and
• Personal performance will be assessed including overall compliance with Excess Wait Time key performance indicators, efficient use of bus captains in managing issues with the services, on-time performance results, first and last bus key performance indicators and the instance of mileage not operated through missed, or curtailed trips.

SAFETY AND COMPANY RESPONSIBILITIES:

• Adhere to all Tower Transit policies and procedures;
• To report to your line manager any injury, collision or dangerous occurrence that has taken place, or concerns regarding health, safety and security issues;
• Provide leadership and guidance in identifying and managing health and safety issues as they apply to the workplace and workplace activities of employees and stakeholders;
• Accountable and responsible for ensuring that the working environment is safe and that employees, including contractors, are protected from hazards and comply with Company policies and procedures;
• Enforce policy, procedures and rules and employee compliance;
• Ensure the working environment is safe and employees, including contractors, are protected from hazards and comply with Company policies and procedures.
• Report hazards which cannot be corrected within the delegated authority of the position;
• Active involvement in all safety and health programs and activities;
• Participate in desk-top and simulated emergency drills in association with response agencies; and
• Promote safety and health awareness generally.

Responsibilities:

Ability to source for supplies and quotation for tendering.

Evaluation of price comparison and costing summary.

Taking off quantities for tender.

To assist in tender documentation/cost tabulation.

Provide support in any other adhoc duties as assigned from time to time.

Requirements:

• Degree or Diploma in Quantity Surveying or Building.
• Minimum 2 years relevant experience in construction.
• Entry level candidates will also be considered.
• Proficient in MS Office.
• Able to work independently with minimum guidance and under pressure to meet tight deadlines.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Purpose: To manage and provide technical support of IT systems and networks, to ensure uninterrupted and secured business operation, and compliance with VDL/ETG standards and roadmap.

Key Area of Responsibilities:

• Maintain and update all information technology (IT) systems, devices and peripherals, within the company to ensure stable and reliable performance.
• Maintain and update the company’s network infrastructure and adhere to the parameters & static address tables according to the One-ETG standard.
• Trouble-shoot and resolve all IT-related technical issues and prevent re-occurrences.
• Ensure security and proper access control of all IT systems, networks and data, so that they are free from malware, spyware, hacking, illegal software and unauthorized access.
• Create regular backups of all relevant company data and store it safely, to ensure Business Continuity, in case of systems and/or network outage.
• Research and benchmark new developments in the IT industry, and propose improvements to business processes to save costs and drive for better efficiency and productivity.
• Source, communicate and manage external parties or service providers that provide service support and maintenance to operational IT matters.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Computer Science/Electrical and Electronic Engineering or other relevant field.
• Minimum 3 years of working as a system support engineer in the semiconductor industry or other similar roles.
• Proficient in Microsoft Excel functions
• Good communication skills

*Location at SATS(those in east side welcome to apply)*

*Training provided*

*Fresh grads are welcome*

The Job:

• To provide preventive maintenance and repair on material handling equipment within a specialized or technical field
• Identify and analyze technical issues through bsystematic troubleshooting methods
• Perform repairs on faulty components, following established procedures and safety guidelines
• Maintain accurate records of maintenance activities, repairs, and equipment history
• Attend ad-hoc jobs as assigned

The Person:

• Diploma or relevant in Mechanical/Electrical Engineering or equivalent
• Must possess class 3 driving license
• Proven experience as a Technician in the relevant field
• Technical knowledge in electrical system, basic engine, and hydraulic system
• Basic IT knowledge
• Able to interpret complex electrical circuit diagrams and problem-solving skills

About the role

Jios Aerogel Pte. Ltd. is seeking a skilled Maintenance Technician to join our team in the West Region. This full-time position is integral to ensuring the smooth and efficient operation of our state-of-the-art industrial facilities. As a Maintenance Technician, you will play a crucial role in maintaining and repairing equipment, troubleshooting issues, and implementing preventative maintenance strategies to support our production processes.

What you'll be doing

• Perform routine maintenance, inspections, and repairs on a variety of industrial equipment and machinery
• Diagnose and troubleshoot equipment malfunctions, identify and resolve issues to minimise downtime
• Maintain detailed records of all maintenance activities, parts used, and repairs completed
• Collaborate with the production team to ensure equipment is operating at optimal performance
• Implement preventative maintenance schedules and procedures to proactively identify and address potential issues
• Assist with the installation and commissioning of new equipment and systems
• Comply with all health, safety, and environmental regulations and protocols

What we're looking for

• Relevant technical diploma or certification in industrial maintenance or a related field
• Minimum 2-3 years of hands-on experience as a Maintenance Technician or in a similar role
• Strong problem-solving and troubleshooting skills, with the ability to diagnose and resolve equipment issues
• Proficient in the use of tools, equipment, and software used in industrial maintenance
• Excellent attention to detail and the ability to maintain detailed records
• Commitment to working safely and following all relevant procedures and regulations
• Ability to work independently as well as part of a team

What we offer

At Jios Aerogel Pte. Ltd., we are committed to providing a rewarding and supportive work environment for our employees. In addition to a competitive salary, we offer a range of benefits, including:

• Comprehensive health insurance package
• Generous retirement contribution plan
• Opportunities for career development and training
• 9.00am – 5.30pm (Pick Up Jurong East MRT @8.20am to Pioneer Road)

Utilities Technician

Location: Pioneer, Singapore

Reporting to: Site Engineering Manager

As the Utilities Technician, you will support site operations including production activities by operation of utilities equipment and electrical installation; and perform maintenance and troubleshooting activities to ensure optimum uptime of the equipment. In this exciting role, you will also:

Main Responsibilities

• Support to daily monitoring, operation and maintenance of Building Management System, Utility Equipment (including compressed air system, process water, waste water system, HVAC, cooling tower and chiller) and electrical installation.
• Perform corrective and preventive maintenances for the utilities equipment (e.g. pumps, agitators, valves) to minimize down time.
• Work with engineer to set up maintenance plan (preventive and predictive) for the Utility equipment and Electrical installation.
• Identify and estimate the resources (workforce, material and time) required for forthcoming / planned maintenance tasks
• Assist engineer in equipment troubleshooting, enhancements and utility line setup.
• Assist engineer to do improvement and monitor performance of equipment for optimization of equipment functionality
• Troubleshoot and repair Utility equipment and Electrical installation safety
• Coordinate with vendors/contractors for equipment maintenance and repairs
• Look for shortfalls in quality and quantity on daily tasks and work on small improvements
• Support and attend to daily ad hoc request with regards to maintenance
• Keep track of equipment spares and work with maintenance planner to replenish the spares upon depletion
• Attend to off-office hour call back to repair equipment breakdown
• Plan, organize and oversee work performed by in-house contractor and external contractor engaged for maintenance work.
• Learn safety policies and guide external contractors on site requirements
• As authorized permit to work applicant
• Good record keeping in all involved tasks relevant data in SAP

Academic Background

• NTC/ITC/Diploma in Mechanical or Electrical background
• 4 or more years of experience in maintenance
• Preferably with experience running of utilities and/or electrical installation.

Technical Skills

• Familiar with basic SAP Plant Maintenance function (module)
• Knowledge of EHS rules and guidelines.
• Good coordination skills with contractors/vendors
• Interpret P&ID and mechanical/electrical drawings

The Technician supports the execution and maintenance of safe and reliable plant operations.

Job Description:

• Carry out blending process operations, perform filling of blended products into drums and isotainers in a safe and efficient manner.

• Carry out chemical additives transfer between bulk packages (tank farm storage tanks, marine vessel bulk) and smaller packages (isotainers, IBCs and drums).

• Control inventory (physical & documentary aspect), including tank gauging & sampling.

• Conduct line pigging and equipment flushing during batch changeover and handle regular start up, shutdown and commissioning of critical process equipment.

• Manage isotainer and storage tank heating in a safe manner.

• Operate plant air compressor, steam boilers, hot oil furnace, pumps, heat exchangers, rotary equipment etc. in a safe manner.

• Carry out minor maintenance work, 5S improvement projects and energy conservation initiatives.

• Adhere to all in house safety, security, industrial hygiene standards and HSES & Quality regulations.

• Able to handle forklift equipment, training will be provided.

• Perform any other production duties assigned by the Operations Superintendent.

Requirements:

• Minimum NITEC in any Engineering or Technical field.

• Minimum experience equivalent to 2 years in a manufacturing environment.

• Prior technical experience in chemical company or prior working experience in a lubricant blending company would be an advantage.

• Able to perform night duty when required.

• Good technical skills in handling rotary equipment & pipeline operations.

• Basic knowledge in Microsoft Office Excel, Word, etc.

As a Technical Assistant, you will play a crucial role in supporting our on-site operations, ensuring the smooth flow of tasks and contributing to the overall efficiency of our team.

• Support on-site team on mannually pushing AGV carts/ trolleys
• Provide support for ad-hoc tasks as assigned by the Site IC (In-charge) or Engineers

Dress Code

• Black T-shirt, long pants and safety shoes

Rate

$12.50/ hour (both weekdays & weekends)

Duration

2nd December 2024 - 20th December 2024 (Might extend 1 week)

RESPONSIBILITIES:

• Perform installation work/service work at the customer site.

• Provide on-site technical assistance to the Senior Technician / Service Engineer.

• Possess a Class 3 driving license during servicing if required.

• Preparation/maintenance of ES batteries in warehouse/site work etc. as per company SOP.

• Packing/delivery/installation of batteries according to schedule by senior technician / Service Engineer.

• All activities required by superiors.

The technician shall possess the following competence:

• Simple inventory management skills.

• Ability to prioritize tasks & able to adhere to company SOPs

• Able to carry out tasks professionally and keep to the service schedule as per superiors/customer instruction.

• Safety-conscious

• Candidate must possess at least an "O" Level with experience or equivalent / ITE – Electrical / Electronic.

• Preferred with 1-2 Years of working experience in the related field.

• Preferably Non-Executive specialized in Engineering - Others or equivalent.

• Must possess a Class 3 driving license. A forklift license is preferable but not a must.

• Able to do OT when required.

• Working Hours: Monday - Friday 0830hrs to 1700hrs

• Work Place: 14A, Joo Koon Circle (Nearest MRT: Joo Koon MRT station)

Responsibilities

• Carry out analysis and application studies in the area of polyurethanes using laboratory equipment such as potentiometric titrations, gas chromatography, FTIR, Karl-Fischer, AAS, and universal testing machine.
• Carry out technological evaluation of finished products using technological equipment and able to reproduce the customers' application processes.
• Calibration and maintenance of laboratory instruments.
• Ensure proper documentations of results, equipment and consumables.
• Ensure proper sample management according to SOPs.
• Carry out safety and housekeeping activities in the department.
• Any other duties as and when required to be done by superior.

Requirements

• Possess at least ITE/Diploma in Chemical Process Technology, Chemistry Chemical Engineering, Science & Technology or equivalent.
• Preferably 1 to 2 years of relevant experience in chemical/ petrochemical industry.
• On-the-job training will be provided.
• Good laboratory knowledge and methodologies.
• Good interpersonal and communication skills.
• Team player.
• Meticulous with an eye for accuracy.
• Proficient in MS Office.
• Ability to prioritize tasks based on urgency.
• Able to work under fast-paced environment.
• Candidate must be willing to work in Jurong Island

Position Title: Apprentice / Print Finishing Technician

Job Responsibilities:

• To perform support role for several areas in Binding and finishing day-to-day activities
• Perform production duties such as manual lifting, packaging, taping, labeling operations and sorting
• Report defective materials or questionable conditions to the department supervisor
• To ensure materials and products are in order and packing specifications are met
• To maintain 6s housekeeping
• To comply Safe Work Procedures (SWP) and adhere to safety in work station/area
• To carry out tasks assigned by immediate superior

Job Requirements:

• 1 year working experience in fast pace
• May involve some repetitive motions
• Understanding and follow basic verbal and written instructions
• Good time management

Markono is committed to fostering and cultivating a diverse and inclusive workplace. We believe that a diverse workforce is needed to drive innovation, grow, and succeed in today’s corporate climate. We recruit and select employees on the basis of merit (such as skills, experience or ability to perform the job), regardless of nationality, age, gender, marital status, pregnancy status, caregiving responsibilities, race, religion, language, disability and mental health conditions. Join us and thrive!

Position: Cargo Oil Pump Fitter/Technician

Location: Singapore

Roles and Responsibilities

· Perform detailed inspections of cargo oil pumps to identify wear, damage, or malfunction.

· Conduct root cause analysis for pump failures, diagnosing issues with bearings, mechanical seals, impellers, or other components.

· Disassemble pumps for cleaning, inspection, repair and overhaul.

· Replace worn or damaged parts, including bearings, mechanical seals, impellers, and shafts.

· Reassemble pumps according to manufacturer specifications and all components correctly installed.

· Calibrate and test pump components to ensure optimal performance and alignment.

· Utilize precision measurement tools (e.g., micro meters, dial indicators) for inspection and dimensional checks.

· Prepare the overhaul service report.

· Use appropriate personal protective equipment and follow safe work practices.

Qualifications

· Relevant trade certificate or mechanical/marine engineering studies.

· Hands on experience with inspection, overhauling and repairs of cargo oil unloading centrifugal pumps with capacity range 3000- 3500 m3/hour

· Previous shipyard experience preferred

· Good written communication skills for reports preparation

· Team player and able to communicate to all stakeholders

· Willing to work long, odd hours and during weekends and holidays to perform urgent machinery jobs

Job Description:

• Production: Deliver product at the required time, quality, and cost
• Process: Follow the defined workflow and procedure
• Installation: Install and maintain electrical systems and equipment. This includes wiring, lighting fixtures, circuit breakers, transformers, motors, generators, and other electrical components.
• Wire harness and Cable crimping
• Building Power Distribution Box
• Planning: Follow the manpower allocation, material and production schedule
• Documentation: Follow the work instruction, work process, and safe work procedure in your manufacturing process
• 5S & Safety: Comply and perform existing 5S & Safety practices and standards at the workplace
• Preventive Maintenance: Perform simple equipment preventive maintenance

Requirements:

• Minimum NITEC or Higher NITEC or Diploma in Engineering or equivalent
• Minimum 1 year of experience as Electrical Technician
• Only Singaporeans
• Basic understanding 2D and 3D mechanical drawing
• Able to execute correct repair or rework on defective product
• Able to communicate in verbal and written English
• Willing to learn new skills
• Willing to work overtime, if required (OT pay & meal will be provided)