Key Responsibilities:

• Strategise and conduct specialist manpower planning in the cluster by working closely with the team on manpower discussions at the clinical service line, monitor the manpower for the future, map out specialty pipeline and identify instability in the workforce, basic analysis of adequacy of manpower, craft and document discussion meetings as well as track the progress of this work;
• Manage the full spectrum of the HR central resourcing of medical specialists from interviewing to on-boarding;
• Co-facilitate the Total Performance Management for clinicians at cluster level from data preparation, analysis and charting to calibration and specialist clinicians’ promotions;
• Keep abreast and work progressively on medical human resource related policies, make recommendations to ensure that they are relevant and in compliance with the regulatory requirements and are up-to-date with the healthcare climate changes;
• Provide professional advice on the interpretation of HR policies, procedures, legislation, manpower planning relating to clinicians;
• Provide supervision and coaching to the junior executives in the team to ensure the effective, efficient and professional delivery of HR plans, programmes, services; and
• Undertake projects/assignments which may be assigned from time to time.

Requirements :

• Minimum 5 years of relevant HR experience in business partnering. Candidates with more relevant HR experience will be considered for the Senior Manager’s position.
• Prior manpower planning experience is a must.
• Excellent interpersonal and communication skills.
• Team player, independent, resourceful and adaptable in a dynamic work environment.
• Digital savvy, analytical skills with proficiency in MS Excel tools for data analysis, building charts.
• Good numeric sense, meticulous and a strong problem-solver.
• HR Experience in healthcare sector, while not a pre-requisite, will be an added advantage.

Health Attendant

CSSD (Central Sterile Supplies Department)

Roles and Responsibilities

• Stationed in the Central Sterile Supplies Department, you will be deployed to different stations- decontamination, assembly, inspecting, wrapping and sterilization of the dental instruments
• Clean and wash dental instruments
• Sort, assemble, protect, pack and label the dental instruments sets according to the checklist
• Perform validation and sterility tests
• Operating of washer (disinfector)/ steam sterilizer
• Document and verify sterilization loads
• Store and issue sterile instruments

Requirements

• Minimum PSLE and above
• Candidates with no prior experience but keen to learn are welcome to apply
• CSSD experience will be an advantage
• Comfortable with handling heavy loads/items up to 7-10kg
• Comfortable with staggered shift duties (730am-5pm) / (830am-6pm)
• 
  

To Apply

To apply for this position, please email to: [email protected], and indicate the subject title as: Application for position of Health Attendant CSSD (Central Sterile Supplies Department)

We regret that only shortlisted candidates will be contacted. Thank you.

• Perform routine preventive maintenance tasks and calibration as per standard operation procedures.
• Carry out fault troubleshooting and equipment failure recovery.
• Review, update and maintain R&M inventory to ensure necessary parts are readily available for repair and maintenance.
• Monitor operation and performance of facility equipment on a daily basis and make adjustments as needed. Eg: HVAC, Air compressor, BMS system, DI water system, UPS.
• Coordinate and supervise contractors to ensure necessary services are provided and meet Company standards.
• Support and execute Capex project to realization.
• Mentor and provide guidance to junior technicians.
• Receive the appropriate training and contribute as a Company Emergency Response Team (CERT) member.
• Perform other duties as specified by Management.
• Be aware of the quality policy and contribute to achieving quality goals by following all related procedures and work instructions. And by doing so adhere to the requirements of the ISO 9001 standard applied within the company, where applicable.
• Practice safe working habits, follow all IDT safety policies, perform safety checks on equipment and systems, and identify, correct, and report potential safety hazards.

• Manage Audio Visual Lighting System (AVLS) and Digital Audio Recording Transcription (DART) for event functions
• Setting up of meeting rooms
• Daily routine check and testing of AV equipment before and after each event
• Daily routine check on cleanliness in meeting, training and function rooms
• Operate AV equipment and provide technical advice related to audio-visual equipment
• Assist with logistics set up for all events
• Perform onsite fault diagnosis and coordinate with product suppliers to resolve technical issues related to video conferencing and audio-visual integrated solutions
• Maintain an updated individual fault record for all fault escalated to the product suppliers
• Any other ad-hoc duties as and when assigned

Requirements:

• Diploma in Electronics/ Audio Visual related discipline
• Minimum 2 years of relevant experience with knowledge in managing the setup of AV systems
• Good interpersonal and communication skills
• Able to work independently
• Willing to work fixed 5.5 days work week
• Has a good safety mindset and display good WSH behaviour

Benefits:

• MNC, 5 days, North
• Salary: $1700 - $2500, allowances
• 12hr rotating shifts: 9pm to 9am/9am to 9pm
• 14-15 working days per month
• Overtime claim, AWS, performance bonus
• No experience can apply
• North/Central

Job responsibilities:

• Provide service and support for Vertical probe cards
• Liaise with customers and factory on the card issues
• Compile of investigation report/tracker/monthly report
• Support for DOE (design of experiment) or evaluations either by customer or company’s initiative
• Pin replacement onsite
• Station at client’s site

Requirements:

• Minimum Nitec in Electronics/Mechatronics
• 1 to 2 years of relevant experience in semiconductor industry
• Candidates with no experience can apply
• Possess basic electronics and troubleshooting skills
• Able to start within short notice

Interested applicants, please send your resume to [email protected]

Job Description:

• Perform welding repair and assembly of aircraft components with gas tungsten arc welding/ tungsten inert gas processes
• Use measuring instruments such as gauge blocks, height gauges, dial indicators and callipers to examine components
• Perform various jobs such as cutting, grinding, sheet metal and assembly works with hand or power tools which include portable riveting guns, squeezers, abrasive tools and torque wrenches
• Meet repair production schedule and delivery requirements
• Suggest new tooling design and modification to existing tooling when required
• Participate in cost control initiatives and continuous improvement projects/ events
• Perform other duties as assigned

Requirements:

• NITEC or equivalent qualification
• Minimum 3 years of working experience in welding aircraft alloy material or in tungsten inert gas/ gas tungsten arc welding. On the job training will be provided for candidates who does not possess relevant working experience.
• Able to read and follow Repair/OEM specifications
• Able to perform rotating shift work, and support overtime, if required
• Open to cross-training and multi-tasking

Responsibilties:

• Responsible for set up and operate CNC & NC Machine according to production schedule and meet all specification requirement
• Perform simple trouble shooting, basic daily machine maintenance and maintaining 6S housekeeping
• Read, interpret & execute various machining works using CNC and NC vertical/ horizontal lathe involving milling, turning and grinding per the engine manual requirements
• Meet tight and demanding repair production schedule & delivery requirements
• Suggest new tooling design & modification to existing tooling when required
• Participate in cost control initiatives & continuous improvement projects/ events
• Perform other duties as assigned

Requirement:

• Minimum NITEC or equivalent qualification
• Minimum 3 years of working experience in aviation repair involving CNC & conventional machining (milling, turning and grinding)
• Able to work rotating shifts
• Proactive to cross-training and multi-tasking
• On the job training will be provided

Job Description

Responsibilities

• Track, monitor and analyze utilities consumption and plan for facilities capacity upsize with respect with scenario ramp.
• Carry out system capacity study to meet Manufacturing requirement
• Able to evaluate and supervise Mechanical modification or enhancement projects.
• Supervise improvement/upgrading/new projects for mechanical system and able to work with and lead respective contractors to complete mechanical jobs effectively to ensure maximum uptime and reliability of the Mechanical systems.
• Able to work with cross functional team effectively in driving projects or troubleshooting.
• Review work procedures and highlight activities which may cause interruptions.
• Provide technical support to Operations and Maintenance team in solving complex mechanical and water systems issues.
• Perform troubleshooting and rectification work independently, applying basic theories and principles to prevent repeat and interruptions.
• Basic understanding of relevant building and mechanical regulatory standards/codes.
• Be aware of and perform all work in accordance with company safety guidelines. Good communication and collaboration within Facilities Sections and with all customers throughout the organization

Requirements

• Understanding of Mechanical system design in Semiconductor industry including its associated equipment’s working principles (e.g. HVAC, exhaust systems, scrubbers, process cooling water, chillers, boilers, cooling towers, pumps, fans, etc) is preferred.
• Diploma in Mechanical Engineering or any related field of study
• Minimum 3 year experience in Mechanical Engineering with a focus on design and construction of Semiconductor Mechanical Systems
• Ability to prioritize and schedule workload and work on multiple tasks concurrently
• Good organizational skills and willing to learn
• Excellent communication skills and good team working skills
• Self-motivated worker
• Familiarity with semiconductor manufacturing and facilities systems
• Strong ability in English speaking and writing

Responsibilities:

• Test and troubleshoot instruments, components, and assemblies, using circuit testers, oscilloscopes, or voltmeters
• Test electrical equipment or systems to ensure proper functioning
• Carry out schedule servicing, and troubleshooting and defect rectification on military aircrafts
• Inspect parts from suppliers conforming to stated specifications
• Keep records of maintenance and repair work. Maintain repair or maintenance records
• Order supplies, equipment, materials and parts for repairs and general maintenance
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts
• Support daily production and deployable to outstation project works when necessary
• Complete all tasks in the allotted time frame and to the quality standards of our company
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns

Requirement:

• Min NITEC/Higher NITEC/Diploma in Aerospace Avionics/Aerospace Engineering or equivalent OR
• Min NITEC/Higher NITEC/Diploma in Engineering with Aerospace work experience
• Able to work rotating shift
• Singaporeans only

Job Description:

• Perform repair processes such as plasma spray, water jet, shot peening, heat treatment, cleaning, masking, blasting, sheetmetal etc
• Meet repair production schedule and delivery requirements
• Participate in cost control initiatives and continuous improvement projects/events
• Any other duties as assigned

Requirements:

• NITEC or equivalent, preferably with experiences in the component overhaul/repair industry
• Knowledge and skills in any repair process, e.g. plasma spray, water jet, shot-peening, heat treatment etc
• Able to perform rotating shift work, and support overtime, if required

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Purpose of the Role

As part of the System Integration (SI) Team of a multi-million railway turnkey project the SI Engineer will be instrumental in the successful delivery of a complete upgraded Automated People Mover (APM) system. During the design phase of a railway turnkey project, several interfaces are defined, and information are shared between different subsystems and suppliers according to project requirements and milestones. During the testing and commissioning phase, the interfaces require to be validated while meeting the end Customer’s requirements. The System Integration engineer role is, but not limited to, produce test report, manage configuration, change review board, update ICDs/ System level documentation, lead system integration test and change review board.

Responsibilities

• To define and allocate requirements, analyses technical risks, defines interfaces.
• Keep close coordination with the verification and validation, and testing activities with the project teams and participate in the testing and communication activities as required.
• Lead the integration and validation of the internal and external interfaces between subsystems
• Write test procedure required to demonstrate the functionalities at system level
• Provides all the necessary support to the System Integration Manager
• Assure preparation of technical documentation for discussions with customer and suppliers
• Assist and assure design solutions, preparation/execution of various Design Reviews (internal & external) in accordance to the Alstom Engineering Processes
• Lead System Integration Testing

Qualifications

• Engineering Degree with 7 years experience in Electrical, Electronic, Systems Engineering, or other relevant degree or background.
• Proven knowledge in power supply, distribution for railway system. Wayside and Vehicles interfaces/integration is a must.
• Knowledge in other railway system such as Signalling, Communication, SCADA , and rolling stock is an added advantage
• Knowledge on network topologies and interfaces for serial, ethernet, TCP/IP protocol, etc is a must
• Knowledge in development or integration of CBTC Systems
• Knowledge in Rolling Stock Architecture and Interfaces
• Detailed knowledge of in MS Office.
• Knowledge in DOORS, Design tools (Visio, AutoCAD, etc) is a plus
• Very good knowledge in English is required

Behavioral Competencies

• Demonstrates Integrity
• Search to Learn continuously
• Act as a Team Player

Alstom is the leading company in the mobility sector, solving the most interesting challenges for tomorrow’s mobility. That’s why we value inquisitive and innovative people who are passionate about working together to reinvent mobility, making it smarter and more sustainable. Day after day, we are building an agile, inclusive and responsible culture, where a diverse group of people are offered opportunities to learn, grow and advance in their careers, with options across functions and geographic locations. Are you ready to join a truly international community of great people on a challenging journey with a tangible impact and purpose?

Equal opportunity statement:
Alstom is an equal opportunity employer committed to creating an inclusive working environment where all our employees are encouraged to reach their full potential, and individual differences are valued and respected. All qualified applicants are considered for employment without regard to race, colour, religion, gender, sexual orientation, gender identity, age, national origin, disability status, or any other characteristic protected by local law.

Responsibilities:

• Install and configure equipment on data center racks (servers, switches, routers, firewalls).
• Replace components in existing hardware (mainboards, CPUs, RAM, HDDs/SSDs, network modules, transceivers, cables).
• Conduct patching of fiber optics and Ethernet cables, ensuring accurate connections.
• Maintain tidy cable management for efficiency.
• Prepare servers for operation (OS installation, network/firewall config, application installation).
• Perform operational and maintenance tasks (cable tests, equipment power cycling, console interface setup for remote access).
• Troubleshoot issues (ping/traceroute, hardware tests, generate logs for vendor escalation).
• Manage inventory and ensure proper asset tracking.
• Enforce data center processes, access control, and compliance with rules and regulations.
• Escort external vendors to ensure premises security.

Requirements:

• Min Nitec in Computer Science, Information Technology or related disciplines
• Candidate with no experience is welcome to apply, training will be provided
• Proficient in equipment installation and troubleshooting.
• Strong knowledge of data center operations.
• Excellent organizational and communication skills.

I regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R21100604

Data provided is for recruitment purposes only

Business Registration Number: 201735941W.

Licence Number: 18S9037

Benefits:

• MNC, 5 days, North
• Salary: $1700 - $2500, allowances
• 12hr rotating shifts: 9pm to 9am/9am to 9pm
• 14-15 working days per month
• Overtime claim, AWS, performance bonus
• No experience can apply
• North/Central

Job responsibilities:

• Provide service and support for Vertical probe cards
• Liaise with customers and factory on the card issues
• Compile of investigation report/tracker/monthly report
• Support for DOE (design of experiment) or evaluations either by customer or company’s initiative
• Pin replacement onsite
• Station at client’s site

Requirements:

• Minimum Nitec in Electronics/Mechatronics
• 1 to 2 years of relevant experience in semiconductor industry
• Candidates with no experience can apply
• Possess basic electronics and troubleshooting skills
• Able to start within short notice

Interested applicants, please send your resume to [email protected]

Responsibilities

• Carry out repair, perform maintenance checks and modification of the full range of aircraft structural components and body structures
• Inspect defects and determining the repairs required
• Fabricate airframe sheet metal parts, service aviation, subsystem assemblies’ components and perform operational checks to ensure aircraft is in line with regulations and safety requirements
• Identify, remove and manage aircraft corrosions while ensuring aerodynamics smoothness

Requirements

• Min NITEC/Higher NITEC/Diploma in Engineering
• Knowledge in repair work (component repair/sheetmetal structure) will be an advantage
• Able to use precision equipment/tools/machinery
• Work location: North (nearest MRT: Yishun/Bukit Panjang)
• Singaporeans only

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

Senior/ Assistant Manager, Service Transformation (MyChart Product Analyst)

As part of Group Service Transformation Office, the Senior/ Assistant Manager’s key role is to drive care transformation in NUHS by co-creating digital patient journeys and assessing the feasibility of leveraging MyChart for the shortlisted use cases. MyChart has been identified as a key tool for increasing patient engagement and activation. This supports a key thrust of the NUHS vision to deliver Incredible Care that is Digital as default. This role entails active user and stakeholder engagement to map out process workflows, participate in technical solutioning and lead change management efforts to drive MyChart adoption.

Reporting to the Head, Planning & Product Development Section, Group Service Transformation, you will:

Job Responsibilities

1. Support planning initiatives including, but not limited to preparing proposals, collating relevant technical info / statistics to guide decision making.
2. Perform independent research to identify new clinical features that bring value to app users and develop corresponding implementation plans.
3. Identify suitable platforms to reach out to different staff groups in each institution to conduct and support staff training (e.g., department meetings, clinic roll-calls, orientation etc.)
4. Translate the vision of an ideal patient experience into user-centric designs for digital interfaces across service touchpoints
5. Present concepts and designs to key stakeholders for review and iteration
6. Produce clear and comprehensive documentation on business requirements and ensure that the documents remain updated.
7. Harmonize development requirements and requests across public healthcare clusters.
8. Monitor the utilization and adoption of MyChart using Epic reports.
9. Collaborate with technical business analysts and system specialist teams to deliver digital solutions.
10. Coordinate and monitor roll-out of digital solutions across multiple touch-points.
11. Collate feedback directly from user feedback channels (app support email and app store reviews) to improve user interface design, product usability and operational workflows.
12. Manage internal stakeholder engagements and ensure that project plans are communicated timely.
13. Prioritize delivery of new/ existing features based on available app development resources and an understanding of the cluster strategic direction.
14. Support in ad-hoc/special projects assigned to Group Service Transformation.

Job Requirements

1. Degree in Business Administration, Marketing, Science, Engineering, Information Technology or equivalent
2. At least 2 to 4 years of work experience, preferably in healthcare operations, nursing, or allied health..
3. Agile and innovative mind-set.
4. Excellent communication skills in presenting ideas and capable of leading stakeholder engagement sessions.
5. Proactive, with creative problem-solving skills.
6. Up to date on the latest user experience trends, techniques and technologies, preferably with experience in successfully integrating new techniques into solutions.
7. Passionate to be part of digital transformation in Healthcare.
8. Familiarity with NGEMR (Epic) is an advantage.
9. Exhibit the NUHS core values of Teamwork, Respect, Integrity, Compassion, and Patient Centeredness.

1. Generate and submit client reports accurately & on time.

2. Coordinate with client & internal stakeholders to perform repair work/ installation work.

3. Provide the maintenance service of wireless devices, gateways and equipment.

4. Coordinate daily job assignments with the Operations room and field technicians.

5. Assist in troubleshooting, and if necessary, arrange for technical visit/installation works.

6. Assist the client in troubleshooting and provide solutions and/or alternatives.

7. Provide support at night and weekend duties or when necessary.

8. Any other ad-hoc duties

• 
  
•  Perform box-build assembly &/or Testing.
•  Understand work instruction, follows production drawings and sample assemblies through Supervisor/Engineer guidelines, or receives verbal instructions regarding duties to be performed.
•  Required to operate and control equipments and peripheral hardware.
•  Required to operate and control the Production Line/Cell equipment and peripheral hardware, cleaning & maintains the equipment as per work instruction.
•  Monitors the shelf-life usage of perishable chemicals & Materials.
•  Monitors & control the moisture sensitive parts and ESD Material.
•  Empower worker & trigger abnormality.
•  Initiate supporting Engineer to adjust equipment or hardware when workmanship drops below quality specifications.
•  Assist Engineers in resolving quality issues, line balancing and production problems. Records data required for statistical process control, production related reports & inventory management.
•  Track & record DHR and other production related data and reports for Medical products.
•  Performs start or end of shift housekeeping (5S) on the exterior part of the equipment, peripheral hardware & workstation in production area.
•  May occasionally exposed to caustic chemicals, Bio-Hazard & minor Radiation with appropriate Training & PPE in job assignments. The noise level in the work environment is usually moderate.
•  May register as Radiation or Bio-Hazard Worker to handle potential radiation hazards or Bio-Hazard in job assignments.
•  May need to Inspects Raw Materials or Box build assemblies for nonconforming defects.
•  While performing the duties of this job, the employee is regularly required to stand, sit, walk and reach with hands and arms.
•  Job assignments may require frequent overtime (including weekends & holiday).
•  Perform trouble-shooting and testing of box-build units or Repair/ reprocess the box-build assembly.
•  Carryout and support ad-hoc activities as assigned.
•  Trains and certifies new hires or non-certified worker.
•  Assists to fill in Incident Reports and Non-Conformance Material Reports
•  Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs
•  Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Senior / Assistant Manager, Group Service Transformation (Digital Operations Specialist)

Group Service Transformation is seeking a skilled and confident professional to take on the role of Digital Operations Specialist. The successful candidate will play a pivotal role in driving the digital adoption of the NUHS App, ensuring that NUHS is digital-ready and digital-first.

Key responsibilities:

• Identify staff engagement platforms and implement targeted staff training regularly for diverse job functions within NUHS, namely clinicians and patient-fronting non-clinicians.
• Manage staff and patient feedback (on-site and online) on the integration of physical and digital (phygital) experiences across NUHS institutions.
• Map out digital integration opportunities within key ground workflows and implement solutions to identified gaps for process improvement.
• Walk the ground to ensure the smooth operation of the NUHS phygital experience across outpatient clinics.
• Develop effective ways to share best practices with staff on enhancing the patient experience with digital adoption.
• Support institution operations teams in navigating change management for the transition to a digital-first environment.

Training opportunities:

• Learn to navigate and implement change within a healthcare setting.
• Develop skills in effective communication and event planning for successful digital adoption.
• Gain insights into managing digital products.

Job Requirements

• Have a degree from a reputable university with good academic results in Business Administration, Marketing, Science, Engineering, Information Technology or equivalent.
• At least 2 years of working experience in healthcare, preferably in operations.
• Adaptable and agile.
• Proven experience in developing and implementing successful staff engagement strategies.
• Excellent communications skills with strong training competency.
• Ability to adapt messaging to different audience segments.
• Demonstrate good interpersonal skills.
• Comfort in addressing public members and staff.
• Meticulous in work processes.
• Creativity in developing engaging communication materials.

We are a Japanese manufacturer and distributor of electronic components. The main role is to manage the internal system and troubleshoot issues when required.

Reporting to: IT Manager

【What you will be working on】
- Create & maintain in-house ERP system (Fujitsu (Glovia) system)
- Provide end-user daily support
- Create RPA
- New mapping for EDI customers
- Perform improvement projects to minimize manual jobs in the company (such as preventing manual entry mistakes, etc.)
- Improve data accuracy
- Help other subsidiary office with their ERP system

【What they are looking for】
- Diploma holder in IT or Computer
- At least 3 years experience using Pro-IV programming or experience in maintaining the Glovia system
- Experience in using Oracle, PL SQL statement, and Superlayer
- Willing to learn and able to think out of the box to suggest automation for manual entry
- Training will be provided for junior staff

==========================

For interested applicants, kindly email your latest resume (with stated job position and Ref No.) to: [email protected] with following information in order for us to process your application faster:

1. Reason for leaving past and present employment(s)

2. Expected Salary

3. Availability date

Registration No.: R1874034 (Niltasha Binte Ibrahim)

Recruitment License : 12C5051

Looking for Full-Time Veterinary Technician/Assistant to join our team!

Working hours: 10.30am to 8.30pm, except Sundays till 5.30pm.

4 Weekdays + 1 Weekend alternate with 3 weekdays + 2 weekends.

With prior experience working at a vet clinic or with animals preferred. However, candidates without experience are welcome to apply as training and guidance will be provided.

We are looking to hire for our Hougang and Punggol branch.

Job Description:

• Assist vets during consults, treatments and surgeries.
• Care for animals that are likely ill and/or disabled.
• Perform reception duties such as register patients, arrange appointments, dispense medications and respond to enquiries.
• Maintain overall hygiene and cleanliness of clinic (including animal cages, consulting rooms and surgery room).

Descriptions

• Responsible for all machineries and equipment repair and maintenance works.
• Hands on troubleshooting and repairing (on-site and off-site)
• Supervises group of workers to perform mechanical jobs and gives guidance.
• Provide technical support to operation team to achieve productivity, technical, quality and safety requirement
• Ensures that workers are using the tools and equipment correctly and safely.
• Ad hoc assignment by Supervisor

Requirements

• Minimum 2 years working experience in a similar role.
• Able to work independently with minimal supervision.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore (NUS) Department of Civil and Environmental Engineering invites application for one (1) Research Fellow position in the area of intelligent transportation systems with emphasis on system development, deployment, integration, and delivery.

The candidate is expected to work on

(1) research projects related to smart lamp post development, deployment, integration, and delivery for related applications under the Cisco-NUS Accelerated Digital Economy Corporate Laboratory.

(2) Work with contractors and agencies for systems hardware and software development and field deployment and must be willing to go on field and discuss on progress with contractors appointed to work on the trials. In addition, the candidate should also possess good communication and team working skills and can present research findings in publications and professional meetings (including with agencies and the industry).

Job Requirements

• Possess a Ph.D. degree in a related discipline (transportation engineering, operations research, computer engineering/science, or related disciplines)
• strong interests and expertise in traffic simulation, statistical modeling, mathematical programming, reinforcement learning, and optimization
• Strong written and oral communication skills.
• Has relevant expertise and work experience in traffic simulation software and programming with at least one language, e.g., Python, Java, or C++.
• Open to fixed term contract.