The MEP Engineer is responsible for all aspects of mechanical and electrical engineering activities, processes, and construction of projects.

· Monitor and report on the progress of work to project manager;

· Control the progress of RFA, RFI, Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Status for on-time completion.

· Coordinate with client’s representatives, consultants, and subcontractors on all technical matters, including submission of method statement, drawings, materials, samples and work progress;

· Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.

· Carry out inspection of MEP works prior to concreting or subsequent construction works;

· Assist in supervising and coordinating MEP services work closely with other departments;

· Assist for submission of evaluation of progress claim, variation work to M&E Manager

· Participate in all relevant project review meetings, site meetings, design meetings, and other project relevant meetings;

· Responsible for carrying out M&E technical meetings and resolving technical issues with record.

· Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.

· Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing QA/QC inspections to meet with construction schedule.

· Provide and maintain all site inspection records & T&C records up to date.

· Ensure quality of MEP workmanship and compliance with safety and environmental requirements

· Provide and maintain all site inspection records & T&C records up to date.

Requirements:

· Degree in Electrical/Mechanical Engineering, recognized by PE Board Singapore;

· Minimum 3 years’ work experience related projects in Singapore building and construction industry;

· Electrical/Mechanical Engineering experience in HDB projects or high-rise developments;

· Possess strong Electrical/Mechanical knowledge with hands-on experiences;

· Strong communication skills with the ability to coordinate with site teams to execute work

Suitable candidates are encouraged to apply this position via Apply Now button or email to [email protected]

Only shortlisted applicants will be notified.

Primary Function:

He/She reports administratively to the Quality Assurance Manager. Responsible for ensuring compliance with regulatory standards and internal quality requirements throughout the maintenance and repair processes of aero engines. This role involves developing, implementing, and monitoring quality assurance processes to ensure the highest standards of safety and performance.

Working Date: Monday - Fri

Working Hours: 7.30am - 4.30pm

Salary: $3-4k

Location: Loyang (Company shuttle provided: Sengkang, Tampines, Bedok, Woodlands, Yishun)

Duties:

• Quality Management System (QMS): Develop, maintain, and enhance the QMS in compliance with regulatory requirements (e.g., EASA, FAA).
• Audits and Inspections: Conduct internal audits and inspections to ensure adherence to quality standards and procedures. Prepare audit reports and facilitate corrective actions.
• Process Improvement: Identify areas for process improvement and implement corrective/preventive actions to enhance quality and efficiency in maintenance operations.
• Documentation Control: Oversee the control of quality documentation, including maintenance records, inspection reports, and compliance checklists.
• Non-Conformance Management: Manage non-conformance reports (NCRs) and facilitate root cause analysis to prevent recurrence.
• Supplier Quality Assurance: Collaborate with suppliers to ensure materials and components meet quality specifications.
• Regulatory Compliance: Stay up-to-date with regulatory changes and ensure all quality processes align with industry standards.
• Reporting: Prepare and present quality metrics, trends, and reports to management and relevant stakeholders.

Job Entry Requirement:

• Education: Diploma/Bachelor’s degree in Aeronautical Engineering, Mechanical, Industrial Management, or a related field.
• Experience: Minimum of 3-5 years of experience in quality assurance within the aerospace industry, preferably in aero engine maintenance.
• Knowledge of Part 145 (CAAS, EASA), SMS (Safety Management System), ISO 9000 standards family (International Organization for Standardization), or equivalent.
• Certifications: ISO9001/AS9100/9110 Internal/Lead auditor.
• Relevant certifications (e.g., Six Sigma, ASQ CQE) are a plus.
• Technical Skills: Proficient in quality management tools and methodologies; familiarity with aviation regulations and standards.
• Analytical Skills: Strong problem-solving skills and the ability to analyze data effectively.
• Communication Skills: Excellent written and verbal communication skills; ability to interact with all levels of the organization.
• Attention to Detail: Strong focus on detail and a commitment to maintaining high-quality standards.

EA Personnel Name: Izz Lokman
EA Personnel No: R24124828
EA License No: 05C3451

Workplace Location : 625 Aljunied Rd Aljunied Industrial Complex

Roles & Responsibilities

Manage end to end recruitment including onboarding process, and confirmation;

ERP top-up (twice a month), process medical claims, disciplinary matters;

Files and maintain all records via written and electronic formats are up-to-date;
Work pass application and cancellation, insurances, maintaining P-File and HR matters;

Maintain HR Benefits and Compensation matters, Training and Development and HR processes
Any others daily ad-hoc duties as assigned by management

Job Requirement
1. Bilingual in Mandarin & English & can start IMMEDIATE (an advantage)

2. With Good working attitudes. At least Diploma in related fields;

3.Ability to handle sensitive and confidential information with discretion;
4.At least 3 years of HR and Payroll proven experiences
5.Full HR spectrum - Hands-on & Experience in HRMS Payroll softwares (Times Payroll Software, Info-Tech, Easy-Pay, QuickHR, etc )

6. Working hours : Mon-Fri : 8:30 to 5:30pm,

Sat 8:30 to 12:30 noon (with Alternate sat)

7. Singaporean / PR welcomes to apply. (No have Quotas for FOREIGNERS)

Able to multi-task, work in a fast-paced environment and work under tight deadlines.

If interested, kindly send in your CV for consideration. Only shortlisted candidates will be notified.

Responsibilities

• Provide expert-level technical support for complex enterprise network environments
• Design, implement, and optimize network solutions across various industries
• Troubleshoot and resolve critical network issues, ensuring minimal downtime
• Lead high-priority network projects, including Tech-Refresh initiatives
• Participate in 24/7 on-call rotation and critical network escalations
• Perform network maintenance, including security configurations, patches, and upgrades
• Conduct risk assessments and vulnerability reviews on network infrastructure
• Monitor and analyse network performance, recommending improvements
• Collaborate with cross-functional teams to ensure seamless service delivery
• Serve as the primary technical escalation point for complex network issues
• Provide detailed reports and presentations on network status and performance
• Extensive experience in enterprise-level network design, implementation, and troubleshooting

Requirements

• Degree in Computer Engineering or related field with at least 5 years of experience in network engineering in medium to large organization
• Expert knowledge of network technologies (routing, switching, firewalls, FTTH, SASE, SD-WAN)
• Proficiency in WLAN solutions, particularly Aruba airwave and Aruba ClearPass
• Advanced certifications preferred (Aruba ACCX, ACMP/ACME, Cisco CCNP/CCIE certifications)
• Hands-on experience with various firewall/security technologies
• Strong skills in configuring and optimizing network devices for efficiency and security
• Proven project management and troubleshooting abilities
• Excellent communication and customer interaction skills
• Adaptable team player capable of working independently

Job Description:

Join our Digital & IT (IT Support and Infrastructure) team to administer and enhance our IT systems. Enjoy a stable work environment with a small team that is friendly, helpful, and encourages a healthy work-life balance. You will manage our IT infrastructure, provide technical support, and ensure system security, along with administering Microsoft 365 services for our end users.

Key Responsibilities:

• Microsoft 365: Manage M365 services like Exchange, SharePoint, Entra and Intune.
• Infrastructure Management: Maintain Windows servers, networks, switches and other hardware.
• Installation & Configuration: Set up and maintain IT equipment and software.
• Technical Support: Troubleshoot and resolve hardware and software issues.
• System Security: Monitor performance and ensure IT system security.
• Network Security: Manage FortiGate Firewall for network security.
• Vendor Liaison: Coordinate with external vendors and handle IT procurement.
• Documentation: Maintain IT process and procedure documentation.
• Project Participation: Support IT projects and initiatives.

Qualifications:

• Degree or diploma in Information Technology, Computer Engineering, or a related field, or relevant industry certifications, or relevant working experience.
• Good understanding of IT support and infrastructure management.

Experience Levels:
We welcome candidates at all experience levels—from entry-level to senior and lead. Salary will be commensurate with your experience and qualifications.

If you seek a stable and supportive work environment, apply now to join our friendly and helpful team!

By submitting your resume, you have given SNEF consent to collect data which will be used for the assessment and evaluation of your suitability for employment within the organisation.

Techwise Offshore Consultancy provides design & engineering, marine assurance and construction management services to the marine, offshore oil & gas and renewable energy industries. We are looking for an experienced Offshore Structural Engineer to join our Singapore office.

Responsibilities

· Structural design of FPSO modules and equipment foundations.

· Vessel modification engineering.

· Finite element analyses.

· Rigging design and lifting analyses.

· Seafastening, transportation and offshore installation engineering.

· Structural drawings and installation sequence drawings.

· Site inspections and on-site technical support.

Requirements

· Degree in structural engineering or equivalent.

· Minimum eight years of relevant experience in the marine and offshore industry.

· Proficient in drafting

· Experienced in structural design and finite element analyses.

· Proficient in English.

· Good interpersonal and communication skills

· Attention to details.

· Must be a team player but able to work independently.

The position will be based in our Singapore office and may occasionally need to attend at shipyards or onboard vessels for site inspections. If you are interested, please send your application to [email protected].

Job Description & Requirements

• Develops and conducts test plans, test scenario and protocols for design verification, process characterization, process validation, finished product and benchmarking study to generate test reports.
• Design, develop, and implement automated and manual test procedures for functional, non-functional, regression testing and user acceptance testing to ensure that the software is meeting quality standards.
• Conduct Performance testing with automated test script and test tools.
• Perform performance testing to evaluate system responsiveness, stability, and scalability under varying workloads.
• Analyze performance test results and generate detailed reports to identify performance bottlenecks and recommend optimizations.
• Reporting defects or bugs found during the testing process to the development team and tracking them until they are resolved.
• Collaborate with various stakeholders as well as software developers to make quality assurance of the software product.
• Providing feedback to project managers and stakeholders on the software’s quality and testing progress.
• Staying up to date with industry trends and best practices in software testing and quality assurance.
• Perform tasks assigned by direct supervisor.
• Pre and post deployment testing for both before and after deployment to ensure compatibility and functionality.

Requirements

• Min. two (2) year experience as a software tester in the software development but not limited to hardware testing.
• Experienced in tracking test issues in Jira/Practice test or any other equivalent test tool is a MUST.
• Experienced with programming languages for automation such as Java, C#, dotnet or similar.
• Strong understanding of software testing methodologies (functional, regression, performance, and user acceptance testing), tools, and techniques; experience with automated testing tools and frameworks such as Selenium, Appium, or Cucumber is preferable.
• Experienced in scrum project or equivalent as the agile software development framework.

• Conduct workshops and lead discussions with customers for business requirements
• Perform feasibility study and fit/gap analysis on the requirements
• Liaise with subject matter experts/technical team for the design of solutions
• Perform system configuration and run the unit testing
• Able to coordinate and organize systems integration testing with external parties
• Coordinate and assist the customers during user acceptance testing.
• Coordinate and assist in the reporting of vulnerability assessment and penetration testing
• Work with technical team to resolve issue/bug fixes
• Conduct user training session
• Support UAT & PRD deployment
• Documentation of material required for deliverable (Functional Specification, Test Plan, Test Scripts, Training Material etc.)
• Assist in project management activities by supporting the Project Manager
• Mentor and guide new or junior colleagues
• Perform Ad hoc tasks not limited to the list of responsibilities mentioned above.

Requirements

• Preferably prior business analyst or consulting working experience
• Degree or Diploma in Computer Science, Information Systems, Information/Infocomm Technology, Computer or Electronics Engineering or related discipline.
• 2 Years working experience.
• Excellent communication and collaboration skills to work with customers, internal teams and external vendors
• An ability to articulate and clearly communicate complex problems and solutions in a simple and logical manner
• Strong analytical, problem-solving skills and detail oriented
• Able to work independently and as part of a team

Responsibilities:

• Develop, design, and implement efficient manufacturing processes to improve productivity, quality, and safety.
• Conduct process simulations and tests to evaluate the feasibility of new processes.
• Provide maintenance and come up with a maintenance schedule for machines, jigs and fixtures.
• Lead and manage engineering projects from concept to completion, ensuring they are delivered on time, within scope, and within budget.
• Develop project plans, including schedules, resources, and budgets.
• Coordinate with cross-functional teams, including production, quality, and maintenance, to ensure project success.
• Implement Lean Manufacturing and Six Sigma methodologies to enhance process efficiency.
• Ensure all processes and projects comply with relevant health, safety, and environmental regulations.
• Conduct risk assessments and implement mitigation plans to ensure a safe working environment.
• Prepare and maintain detailed process documentation, including standard operating procedures (SOPs) and work instructions.
• Provide training and support to production staff on new processes and equipment.
• Conduct time study to get UPH.
• Other duties as assigned.

Requirements

• Bachelor’s degree in Engineering, Mechanical Engineering, Industrial Engineering, or a related field.
• Minimum of 3-5 years of experience in process engineering orproject management
• Proficiency in process simulation software (e.g., Aspen Plus,HYSYS).
• Strong understanding of Lean Manufacturing and Six Sigma principles.
• Knowledge of CAD software (e.g., AutoCAD, SolidWorks) is preferred.
• PMP certification is a plus.
• Experience in production

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
• Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities :

• Promote and propose company chiller & equipment to building consultants and contractors
• Responsible for developing long term customer relationships
• Building close business relationship with customers especially key accounts
• Maximizing account penetration and customer retention
• Identify potential opportunities & develop solutions with existing & new customers
• Update forecast timely into the system
• Negotiates value, addresses resistance, and close the sales.
• Differentiates & made company as preferred supplier
• You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Degree in Mechanical/ Electrical engineering or its equivalent
• 1-2 years in Engineering sales, experience in HVAC industry will be a plus
• Customer driven with excellent communication & interpersonal skills

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:
• Conduct inspection, trouble shoot and complete maintenance of ship’s main engine remote control system and navigation equipment
• Familiar with ship owners and shipyards working procedures and environment
• Willing to work in local and overseas shipyard as well as anchorage environment at irregular hours which include overnight, weekends and public holiday depending on vessel schedule

Requirements:
• Relevant marine / mechanical / engineering qualification
• Sound knowledge in pneumatics / electrical control engineering
• ‘Hands on’ experience in Marine Automation
• Those with minimum experience or education level will be consider for Technician

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.
• Hands on in setting up of test lab to enable development and testing.
• Perform PLC software and algorithm development for electrical propulsion solutions.
• Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.
• Participate and support commissioning of vessels with similar configurations.
• Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.
• Any other tasks as may be required by supervisor.

Requirements:

• Min engineering degree in relevant discipline
• Strong software development skills particularly in equipment controls
• Strong analytical and troubleshooting skills
• Hands on person
• Team player
• Good communicator and has no problem engaging with external parties
• Knowledge in power electronics, motor drives, marine propulsion systems is a plus

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Job Description

• Create and Identify Automation Solutions opportunities for campaigns, services, and distribution channels that will lead to promoting sales volume
• Create and execute sales strategy to achieve sales target
• Present value messaging effectively to customers with solutions selling mindset
• Develop, qualify and drive Automation business-oriented opportunities from concept to closure
• Evaluate and prepare technical and commercial proposal by collaborating with internal teams
• Establish, develop, and maintain positive business and customer relationships
• Develop and maintain a deep understanding of the Industrial Automation solutions market, key trends, the competitive landscape and enterprise use cases
• Work closely with the team to develop solution proposals
• Keep track of industrial, statutory and regulatory bodies requirements and updates to determine the impact on the business and assess potential opportunities

Requirements

• Degree/Diploma in Electrical, Electronics Engineering, Control, Instrument or Mechatronics
• At least 5 years’ Sales experience with industrial automation projects
• Self-Driven, possess Hunter mindset with proven track records in developing and maintaining key customer relationships
• Outstanding presentation and interpersonal communication skills with initiative and drive
• Goal-oriented, competitive, persuasive and can work individually and in a team environment
• Good understanding of systems integration, industrial automation, IIoT and manufacturing operation management systems
• Those familiar with Sales and Proposal of various Control Systems such as PLC, SCADA, DCS will have added advantage
• Strong industry knowledge and customer base in any of the industries: Manufacturing, Commercial and Industrial Building, Healthcare, Utilities, Petrochemical, Onshore and Offshore Oil & Gas

Responsibilities:

• Senior Process Engineer II (NPI) scope of work includes setting up manufacturing processes, quality control measures, improvement exploration including design of jigs and looking into design for assembly.
• Will need to have a good understanding of existing manufacturing set-up and using techniques such as value stream mapping (VSM), will design the manufacturing concept to optimize available resources. After defining the manufacturing concept, will design the manufacturing processes and incorporating design for assembly (DFA) principles to simplify assembly processes by reducing components or assembly operations required. From these activities, with the objective of optimizing the overall product manufacturing cost.
• Setting up the manufacturing processes and quality control, will create work instructions, testing and/or checklists for inspection for critical to quality measurements. Will define test or measurement parameters and provide requirements to tester design team to develop the testers.
• To improve efficiency and manufacturing practices, the candidate will explore designing jigs for ease of assembly and critical alignments. Alternative tools exploration such as smart tools and fixtures which support better ergonomics will also be considered.
• During the projects before M300, the candidate will be involved in prototype build and support activities of pre-series build. The candidate is a stakeholder in PAG will provide timely feedback via TFS tickets and bringing the discussion to PAG meeting for improvement and resolution. The candidate works closely with stakeholders such as Project manager, Supplier Quality, Quality management, Production and Service. The candidate is also required to review and approve all initiated ECR, and improvement recommendations if necessary. The candidate is required to ensure the successful implementation of ECRs. The candidate supports the project and prepares at critical milestones for readiness check, Q-checks, and evaluation of product/safety risk assessment ensuring on time release of products to market. The candidate will be responsible to set-up the SCM acceptance and delivery criteria ensuring product test and assembly is meeting required specifications.
• Upon M300, the candidate will be the project lead for knowledge transfer between sites. The candidate is responsible to ensure the successful set-up of manufacturing site with scope of tester readiness, technical knowledge, production layout set-up and build capability.
• For the manufacturing engineering team, NPI Process Engineering will be the internal auditor ISO45001 with responsibilities of preparing and representing the team in external audits for recertification

Requirements

• Diploma/Degree of Engineering (relevant field)
• Diploma with min 5-7 years working experience in Manufacturing or automation environment
• Bachelor Degree with 3-5 years working experience in Manufacturing or automation environment
• Ability to interface with the different department and stakeholders

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Schedule, plan and execution of new projects.
• Organizing and motivating a project team (tender to completion).
• Oversee the construction team and planning of project budgetary.
• Manage manpower activity and resource planning.
• Conduct performance assessment for all assigned teams under your care.
• Conduct bi-weekly or monthly (where applicable), management the execution of construction works, including monitoring work progress and quality and progress reports.
• Manage vendors and sub-con for progression of work and assessment of their performance
• Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities’ regulations.
• Responsible for the project quality and safety plan.
• Ensure company ISO and OHSAS requirements are fully implemented on project.
• Coordinating with Authorities, Clients, Consultants and Subcontractors on all project aspects.
• Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite.
• Manage progress claims, payments and cash flow and variation orders.

Requirements:

• Min. Diploma in Electrical Engineering
• Possess technical, financial and project management knowledge
• Able to apply knowledge to the situation and train staff
• Lead the project from tender stage and run the job until it is completed
• Good at problem solving and able to identify issues
• Mature, reliable and dependable
• A team player and not just an individual contributor
• Excellent interpersonal skills
• Able to interpret technical information and numerical data

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities

• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Coordinate with clients, architects, sub-contractors, and other relevant authorities Plan and ensure M&E works are completed in line with Master Programme and micro-schedule.
• Monitor and ensure all M&E works are carried out in accordance with drawings, specifications and Authority codes. Handle any other ad-hoc duties and tasks assigned.

Requirements

• Degree/Diploma in Mechanical Engineering recognised by Singapore
• Professional Engineers Board (PEB) in Civil Engineering or equivalent with 3 to 5 years of working experience in the construction industry.
• Required Skill(s): Autocad, Microsoft Office

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Collaborate with cross-functional teams, including, electrical engineers, mechanical engineers, designers, programmers, suppliers, and stakeholders, to plan, execute, and deliver engineering projects focused on green marine systems for marine vessels within defined timelines and budgets.

• Together with core technical teams, conduct feasibility studies, evaluate technical requirements, and develop project specifications and scopes of work for green marine system integration projects.

• Coordinate and oversee engineering activities throughout the project lifecycle, ensuring adherence to project plans, standards, and regulatory requirements.

• Together with technical team, review and interpret technical drawings, schematics, and specifications to ensure accurate implementation of green marine system designs and compliance with industry standards and regulations.

• Conduct risk assessments and develop mitigation strategies to ensure the safety, efficiency, and reliability of green marine system projects.

• Monitor project progress, identify potential issues or bottlenecks, and implement corrective actions to ensure project milestones and deliverables are met.

• Manage project budgets, track expenses, and provide regular cost reports to stakeholders.

• Coordinate and track procurement activities for green marine system components.

• Collaborate with the procurement team to ensure timely delivery of materials, equipment, and services required for green marine system projects.

• Conduct regular site visits and inspections to monitor installation and integration activities, resolve technical issues, and ensure compliance with project specifications.

• Prepare and deliver project progress reports, presentations, and technical documentation to stakeholders and senior management.

• Manage delivery of documentations, including but not limited to FAT, HAT, SAT, operational and maintenance manuals.

Requirements:

• Bachelor’s degree in Marine Engineering, Mechanical Engineering, Electrical Engineering, or a related field.

• Proven experience as a Project Engineer, Marine Superintendent or similar role in the marine, shipbuilding or relevant industry, with a strong track record of successfully delivering engineering projects.

• Knowledge of marine vessels systems, including electric motors, generators, batteries, power management systems, and control systems is an advantage.

• Familiarity with marine vessel propulsion systems, including diesel engines, gas turbines, and electric propulsion technologies.

• Proficiency in using engineering software and tools, such as AutoCAD, SolidWorks, and project management software.

• Strong project management skills, with the ability to plan, prioritize tasks, manage deadlines, and adapt to changing project requirements.

• Excellent analytical and problem-solving abilities, with a keen attention to detail.

• Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams and stakeholders.

• Strong leadership skills, with the ability to motivate and guide project teams.

• Knowledge of procurement processes and experience in managing supplier relationships.

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Plan, manage, execute and close out construction projects (and/ or maintenance construction works) in a safe, timely and sustainable manner including managing nominated subcontractors & vendors;
• Produce long and short term work plan / schedule for assigned task/projects;
• Conduct site investigations and analyse data (reports, tests and drawings);
• Ensure quality of work produced meeting requirements and ensure all pertinent documentations for the job is in order that includes but not limited to method statement & risk assessment, as-built drawings, EQCC, ITP, FIS (field info sheet) compilation of project documents and project closures
• Follow through with job quotations/ BQs, progress claims and issuance /closure of POs for the jobs
• Ensure work carried out safely and comply to all safety requirements
• Handles and resolve technical issues including liaising with subcontractors, vendors, designer and/or consultants
• Coordinate/ communicate with client and own staff (supervisor & logistics supplies) from planning stage till handing over including claims
• Planning of resources for the project (manpower, equipment & materials)
• Progress monitoring and reporting of project status
• Pre-work preparation, e.g. site visit, schedule, MS/RA etc.
• Setting project target and meeting supervisors regularly to share work plan and resource sharing;
• Regular site visit to identify system/ process deficiency and highlight in timely manner
• Recommendation and implementation of operational improvement possibility (including mechanisation, digitalization and other productivity and cost optimisation improvements)
• Carry out technical and feasibility studies that satisfy technical specifications
• Hand over the resulting structures and services for use including follow-up works related to DLP or warranty periods
• Follow through with incident reporting if there are any incidents to their respective sites
• Purchasing of materials that includes raising of MRF and close out of GRN once material received
• Checking on materials delivered to confirm correct materials ordered & delivered
• Attend monthly HSSE Committee meeting and highlight any pertinent issues
• Attend schedule project/ site meetings (internal & external) and highlight any pertinent issues; including producing meeting minutes
• Resolving any unexpected technical difficulties and other problems that may arise.
• Enhances organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.
• Taking part of tender preparation process including submission of technical submission, project schedule and any other actions required for the tender submissions

Requirements:

• Possess a Degree in Civil Engineering or equivalent recognized by Singapore PE Board.
• Minimum 3-5 years' of relevant site experience work for civil projects.
• Must be technically inclined and possesses excellent problem-solving.
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and construction teams.
• Candidate can start work in short notice is preferred
• Experience in using Microsoft Project/ Primavera or equivalent is preferred

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Collaborate with the manager and design team to review project plans, specifications, and technical drawings.
• Supervise and coordinate the activities of subcontractors, suppliers, and construction workers on-site.
• Conduct site inspections to monitor progress, identify potential issues, and ensure adherence to safety and quality standards.
• Implement and enforce site safety protocols, including conducting safety briefings and ensuring compliance with relevant safety regulations.
• Prepare and maintain project documentation, including daily progress reports, site diaries, and as-built drawings.
• Monitor project schedules and budgets, identifying variances and implementing corrective actions as necessary to ensure project success.
• Coordinate material procurement, delivery, and inventory management to support project timelines and minimize delays.
• Resolve technical issues and provide engineering support to resolve construction-related challenges.
• Communicate effectively with project stakeholders, including clients, architects, engineers, and subcontractors, to ensure alignment and resolve issues promptly.
• Participate in project meetings, providing updates on site progress, challenges, and recommendations for improvement.
• Assist in the commissioning and handover of completed projects to clients, ensuring all documentation and quality standards are met.
• Stay updated on industry trends, best practices, and emerging technologies to continually improve project delivery processes and outcomes.

Qualifications:

• Diploma or Degree in the field of Civil or Structural Engineering or Electrical Engineering / Construction Management.
• Proven experience as a Site Engineer or similar role in the construction industry, preferably in sportscape projects.
• Strong technical knowledge of construction methods, materials, and techniques.
• Proficiency in reading and interpreting technical drawings, specifications, and construction plans.
• Excellent organizational and time management skills, with the ability to prioritize tasks and manage multiple projects simultaneously.
• Strong leadership and communication skills, with the ability to effectively collaborate with multidisciplinary teams and stakeholders.
• Knowledge of relevant safety regulations and best practices in construction safety.
• Proficiency in project management software and Microsoft Office Suite.

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

1. To assist Project Manager in project planning/scheduling by using Microsoft Project or any other project management software that specified in the project specification

2. To manage the project’s drawing office and to prepare workshop drawing schedule

3. To coordinate with architectural, M&E coordinators and sub-contractors in the workshop drawings preparation

4. To liaise with sub-contractors/suppliers on the structural materials proposal

5. To organize and manage in seeking consultant’s approval on workshop drawings and materials proposed

6. To manage in technical documents distribution control to ensure that drawings and other technical information used in the project site are the latest approved copy

7. To organize and carry out self-inspection on all critical stage of construction works, eg. Piling, precast component installation, concreting works, etc. and are satisfied with the quality standard prior to arrange inspection by the consultant’s supervisors

8. To monitor and control sub-contractor/suppliers performance and to ensure works are being carried out according to the time allocated and to the required quality standards

9. To assist Project Manager in preparing progress report, Power-point presentation, etc.

10. All works process is to be carried out in accordance with the company’s Integrated Management System (IMS)

11. To ensure that all WSHE aspects and measures at site are fully complied with

12. Any other duties assigned by your superiors.

• Assist, manage and review Project Management Plan to monitor all aspects of project including progress, cost management (i.e. Claims & VO verification and procurement negotiation), quality, safety, human resource, environmental and etc.
• Assist Project Director and Project Manager in conceptualizing and executing project schedule, cost, procurement and quality management of project.
• Assist, manage and review project management tool and produce reports to monitor progress of project and identify project critical path.
• Assist in tracking of Architectural Instructions issued and counter propose if necessary.
• Tracks, Interpret and Solve any Drawings discrepancies (RFI) between all Trades.
• Management of project staffs and assists them in fulfilling their potential and beyond.
• Monitoring and ensuring sub-contractors of different trades are able to proceed with their works on site.
• Checking and monitoring wastage of materials on site to ensure no unnecessary wastage of materials.
• Assist PM to chair various committee meetings such as weekly sub-contractors’ coordination meeting, safety committee meeting and etc.
• Leads Weekly Technical Meetings with consultants and client representatives to resolve issues between Architectural, Structural and M&E trades
• Together with PM prepares and presents Biweekly Project Schedule Meeting to Client representatives, consultants and Client QS
• Independently ownership, coordinate & monitor of all ERSS works and relating submissions and requirements between designer and on-site implementation up to dismantling.
• To liaise and coordinate with professional designer for all temporary shoring works and permanent structure works.
• Liaise with clients, consultants, government authorities and sub-contractors to ensure work progression is on schedule and project milestones / deliverables completed according to shareholders’ expectation.
• Hands-on site day-to-day coordination on architectural, structural, M&E, interior design and fit out works, inclusive resolving all RFI
• Acts as liaison between surrounding neighbourhoods (all nearby properties / owners)
• Preparation of official letters to sub-contractors, consultants and client.
• Carry-out structural inspection with RTO/RE
• Other ad-hoc activities as when required by the company.

ONSITE JOB PROFILE

1. Create detailed, comprehensive and well-structured test plans and test cases

2. Estimate, prioritize, plan and coordinate testing activities

3. Manual execution of test cases

4. Identify, record, document thoroughly and track bugs

5. Perform thorough regression testing when bugs are resolved

6. Develop and apply testing processes for new and existing products to meet client needs

7. Liaise with internal teams to identify system requirements and solving the bugs

REQUIRMENTS TO PERFORM THE JOB DUTIES

a) Bachelor of Engineering / Technology (B.E. / B. Tech: equivalent to BS/ Diploma) in CSE

b) Strong knowledge of software QA methodologies, tools and processes

c) Proven work experience in software quality assurance

d) Experience in writing clear, concise and comprehensive test plans and test cases

e) A team player and self-starter who will work side by side with the development team

f) Identifies, communicates, and escalates issues as required

g) Ability to multi-task, prioritize tasks and quickly adjust in a rapidly changing environment

Roles & Responsibilities

Responsibilities:

· Design and oversee electrical systems for port equipment projects.

· Review project specifications and requirements.

· Conduct port equipment visits and inspections to assess electrical equipment needs and feasibility.

· Assist with the commissioning of new eqipment into service. Ensure that equipment is operating according to specifications.

. Obtain commissioning plans to integrate and verify Drive, PLC and control system for Siemens, Yaskawa, and Fuji and in accordance with compliance matrices.

. To know how to read and modify PLC logistic to commissioning port equipment

. Obtain and adhere to testing and commissioning for container handling equipment.

· Provide technical support and guidance to carry out the job according to the work procedure.

· Perform calculations and analysis to determine electrical load requirements.

· Ensure compliance with local codes and regulations.

· Conduct safety inspections requirements, environmental requirements and enterprise procedures are identified and monitored throughout the work procedure and implement corrective measures as needed.

· Implementation of tasks assigned by Project Manager and coordinates communicating project status and success metrics.

Requirements:

· Bachelor's degree/diploma in Electrical Engineering with more than 3 years or more than 5 years’ experience in preferably in building consultancy.

· Proficient in CAD software and other electrical design tools.

· Repair and maintenance on industrial equipment.

· Strong analytical and problem-solving abilities.

· Ability to work effectively in a team environment and able to work at elevated heights.

• Assist, manage and review Project Management Plan to monitor all aspects of project including progress, cost management (i.e. Claims & VO verification and procurement negotiation), quality, safety, human resource, environmental and etc.
• Assist Project Director and Project Manager in conceptualizing and executing project schedule, cost, procurement and quality management of project.
• Assist, manage and review project management tool and produce reports to monitor progress of project and identify project critical path.
• Assist in tracking of Architectural Instructions issued and counter propose if necessary.
• Tracks, Interpret and Solve any Drawings discrepancies (RFI) between all Trades.
• Management of project staffs and assists them in fulfilling their potential and beyond.
• Monitoring and ensuring sub-contractors of different trades are able to proceed with their works on site.
• Checking and monitoring wastage of materials on site to ensure no unnecessary wastage of materials.
• Assist PM to chair various committee meetings such as weekly sub-contractors’ coordination meeting, safety committee meeting and etc.
• Leads Weekly Technical Meetings with consultants and client representatives to resolve issues between Architectural, Structural and M&E trades
• Together with PM prepares and presents Biweekly Project Schedule Meeting to Client representatives, consultants and Client QS
• Independently ownership, coordinate & monitor of all ERSS works and relating submissions and requirements between designer and on-site implementation up to dismantling.
• To liaise and coordinate with professional designer for all temporary shoring works and permanent structure works.
• Liaise with clients, consultants, government authorities and sub-contractors to ensure work progression is on schedule and project milestones / deliverables completed according to shareholders’ expectation.
• Hands-on site day-to-day coordination on architectural, structural, M&E, interior design and fit out works, inclusive resolving all RFI
• Acts as liaison between surrounding neighbourhoods (all nearby properties / owners)
• Preparation of official letters to sub-contractors, consultants and client.
• Carry-out structural inspection with RTO/RE
• Other ad-hoc activities as when required by the company.