ESSENTIAL DUTIES AND RESPONSIBILITIES include the following, Other assignments, projects and duties may be required:

Assisting your Project Manager in:

1. Work with drafters on designing fire protection systems for Data Centres/commercial projects

2. Read up and understand code of practices for fire protection installation

3. Coordination of sub contractor’s site installation

4. Attend meetings with main contractors

5. Assist your Project Manager in preparing variation claims

6. Assist your Project Manager in the submission of method statements/project schedules

7. On site survey to provide a costing for customers

8. Quality checks and analysis. Specifically to check on the compliance of installations done by your sub-contractors

Requirements

Positive attitude

Class 3 license preferred

Diploma and Degree graduate without working experience are welcome.

Training and guardian will be provided to assist you for a successful career in this challenging industry.

2. SKILLS

Class 3 LicenseMicrosoft OfficeConstructionFire ProtectionDrawingElectricalProject PlanningProcurementComplianceProject ManagementAutoCADCivil EngineeringSchedulingElectrical EngineeringCommissioning

Responsibilities:

• Able to manage BMS and ELV projects independently

• Responsible for site activities, coordination and supervision works

• Ensure timely completion of all projects

• Monitor / review operational costs and responsible for financial performance of projects

• Responsible for project management including attending meetings, coordination and supervision works

• Liaise with consultants, architects, and contractors and handle all technical matters

Requirements:

• Degree / Diploma in Electrical and Electronics Engineering

• Minimum 2 – 5 years relevant working experience in BMS or ELV

Other info:

· Company specializes in integrated automated systems

· Salary $3000 - $5500

(Interested candidates, pls apply with resume in MS Word format)

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

Provide technical support to the Front Offices:
- Provide technical solutions to difficulties faced by operators/customers/Front Offices
- Perform visits to prominent operators/customers for technical reviews
- Analyse and issue Technical Agreements to keep engines in service
- Analyse downloaded engine data and parameters as required
- Present SAFRAN Helicopter Engines (HE) products and services during Symposiums and Customer Councils

Ensure product safety, reliability and improvement through the following activities:
- Lead investigations for in-service events
- Gather and analyse return of experience from the field and conduct investigations as required
- Review Health Monitoring Data for operators/customers under contract
- Perform ad-hoc customer visits to as part of crisis management

Support the SAFRAN HE business requirements:
- Lead cost optimization projects
- Participate in digitalisation projects
- Involve in contracts and program management review between Corporate and FO

- Travel between 4 to 10 times annually

Requirements:

- Degree in Aerospace/Mechanical Engineering or equivalent
- More than 5 years' experience in technical support, customer facing or MRO roles
- Good working knowledge in Gas Turbine Engines and/or Helicopter Systems
- Ability to work in a multi-project and cultural environment
- Excellent interpersonal and communication skills (both written and oral)
- Demonstrated ability to work in a highly dynamic environment and in a team setting
- Proven track record for resolution of engineering issues
- Confident to present in front of an audience or customers
- Good working knowledge in MS Office applications

Responsibilities:

• Responsible for providing complete analysis, estimate, and studies for all deliverables involved in the assigned scope.
• Identify design and constructability issues and analysis to determine constructability.
• Develop detailed cost estimates from engineering drawings.
• Act as a connection between subcontractors, design team and client.
• Determine required but non indicated scope through the analysis of site conditions and all contract documents (plans specifications, etc.)
• Collaborate with operations staff to ensure that General Conditions and Requirement items are appropriately captured in the estimate.
• Perform assessment on subcontractor proposals to ascertain if scope is covered.
• Assist in auto-cad drawings and drafting.
• To undertake any other duties as assigned by the supervisor when necessary.

Requirements:

• Bachelor or Diploma in Mechanical Engineering or equivalent.
• Candidates without the necessary qualifications but with relevant experience will be considered.
• Minimum 3 years’ experience in the fields of engineering, manufacturing, servicing, and repair of aircraft tooling, GSE’s, and/or similar equipment.
• Sound working knowledge of engineering principles, GD&T, materials, surface & heat treatments, and equipment testing.
• Candidates with experience in a manufacturing environment including machining, steel and aluminium fabrication, welding and sheet metal work will have an advantage.
• Competent in the use of MS Office applications.
• Conversant with the relevant international and aviation standards.
• Equally adept as a team leader, a team player or independent worker.
• Must be able to multi-task communicate effectively (oral, written and videoconferencing).

Responsibilities:

· Plan equipment, material, and manpower requirements to execute job orders

· Monitor the execution of production plan and resolve any potential issues in a timely fashion

· Monitor production progress and ensure that final product meets quality standards and customer specifications

· Escalate complex issues to Manager for resolution

· Analyse back orders, current orders, and upcoming orders to prioritize, plan, and schedule the production operations
Work with Estimation, Purchasing and Production teams in coordinating and planning production activities to improve runtime

· Adhere to company standards and production policies to meet company objectives

Requirements:

· Diploma/Degree in Mechanical Engineering

· Minimum 3 years of experience in similar role would be ideal

· Well verse in both manual and CNC machining

· Excellent knowledge in fabrication, aircraft jigs & fixtures, mechanical assembly, and aircraft maintenance tooling

· Knowledge of MRP systems is essential

· Able to read and understand technical drawings

· Self-motivated and ability to work under pressure

Job Description:

As an Aircraft Maintenance Engineer, you will play a crucial role in maintaining our aircrafts’ safety and efficiency. You will be responsible for the routine inspection, maintenance, and repair of our aircrafts, ensuring they meet all safety, operational & airworthiness standards.

Responsibilities:

1. Conduct routine inspections and maintenance of aircrafts, including Bombardier, Gulfstream, and Embraer models.

2. Diagnose and repair aircraft systems and components, adhering to strict safety protocols and aviation regulations.

3. Document all maintenance and repair work accurately, maintaining up-to-date records.

4. Collaborate with the internal continuing airworthiness management team and external maintenance providers/supplier to ensure all maintenance tasks are completed within the given timeframe.

5. Respond to any aircraft emergencies or incidents, providing technical expertise and/or AOG support if required.

6. Maintain a safe and clean working environment, adhering to company and industry standards.

7. Stay updated with the latest industry trends, techniques, and safety regulations.

8. Provide technical guidance to junior staff and trainees.

9. Collaborate with flight crews, ground personnel, and other team members to address maintenance issues and ensure smooth operations.

10. Assist with pre-flight and post-flight inspections, as well as other duties as assigned by continuing airworthiness management team.

Qualifications:

1. Degree or Diploma in Aeronautical Engineering, Aircraft Maintenance, or a related field.

2. Valid Aircraft Maintenance Engineer’s License, FAA Airframe & Powerplant mechanic license (reqired).

3. ⁠maintenance Initial course or type rating on either Gulfstream 450, 550 or Legacy 600/650

4. Minimum of 5 years’ experience in aircraft maintenance, preferably with Bombardier, Gulfstream, and Embraer aircrafts.

5. In-depth knowledge of aircraft systems, mechanical components, and safety protocols.

6. Excellent problem-solving, diagnostic, and troubleshooting skills.

7. Ability to work under pressure and in challenging conditions.

8. Excellent communication and teamwork skills.

9. ⁠Willingness to work flexible hours, including nights, weekends, and holidays.

KEY RESPONSIBILITIES

• Supervising, advising and coaching Quality Inspectors
• Organising and deploying Quality control resources
• Monitoring, auditing and assessing inspection processes
• Operating as the 'voice of the customer' for customer feedback, customer reports, supplier issues
• Continual improvement of inspection processes and procedures
• Ensuring all inspection equipment are well maintained
• Maintains safe and healthy work environment by following standards and procedures.

COMPETENCIES

• Verbal communication skills
• Proficiency in English for report writing
• Minimum supervision
• Self-motivated
• Support problem solving and decision making through A3 problem solving tools, kaizen events.
• Use the DMAIC process to improve Quality metrics
• Ensure the factory is functioning appropriately and delivering excellent customer service

QUALIFICATIONS & EXPERIENCE

• A proven track record in Quality Project Engineer Role
• At least 3 years experience in inspection of fabrication and machining parts
• Experience in CMM programming
• Able to read and interpret the GD&T print of assembly, machining and fabrication drawings, P&ID
• Excellent IT skills in Visual Basic / Micro / PPT / Word
• Experience in a manufacturing / engineering / machining and inspection techniques is essential
• Qualification in welding Inspector or welding NDT will be a plus

Functional Area

PPC is responsible for all planning activities related to airframe maintenance projects at FSA. Main activities are preparation of the work packages, provision of direct support to the production area, master scheduling, manpower planning and working with the commercial department on accurate forecasting.

Role Purpose

The Production Planning Engineer role is key for completion of each airframe maintenance project. Within this role you are directly supporting the production team and enabling them to efficiently perform their work according to our and various national quality standards.

The Production Planning Engineer is a key point of contact for our customers and ensures provision of accurate and frequent information to FSA’s customers in a timely matter.

As a Production Planning Engineer, you will also work in close collaboration with the engineers, sales force as well as the daily operational management team.

As a result, you are a core contributor to the effective and efficient completion of each heavy maintenance check.

Key Accountabilities & Responsibilities

As a Production Planning Engineer, you will be responsible for the planning activities before and during a heavy maintenance check. These responsibilities are, but not limited to:

• Generation of material request in our ERP system
• Analysing the projects outstanding work and providing project status reports
• Monitoring and controlling the task card flow, both the physical as well as the digital flow
• Handling outside service requests
• Composition and control of project plans
• Preparation of final reports
• Liaison with technical support departments of the OEMs
• Facilitation of daily progress meetings
• Attend meetings with customer to provide latest project update
• Work and support production department continuously on requirement of additional material and other project information
• Participation in lean projects
• Responding on customer requests
• Coordination of aircraft parts robbing process
• Correctly archiving of the project documentation

Key Skills, Knowledge, Experience and Competencies

• Minimum of 2 years’ experience working in an airframe maintenance environment
• Experience in base maintenance is preferred
• Minimum of 2 years’ experience in production planning
• Solid computer skills
• Able to read technical drawings
• Strong verbal and written communication skills
• Proven analytical skills, including data analysis interpretation
• The ability to define and implement actionable plans
• Team player and strong interpersonal skills
• Enthusiastic, assertive, and proactive personality

Our company is recruiting for a Sales and Field Application Engineer to serve as company liaison with customer on administrative and technical matters for assigned projects. You will be responsible for selling into new prospects as well as farming back into existing customers to ensure high renewal and customer satisfaction levels. Measures of success include new customer acquisition rates, renewal rates, up-selling, cross-selling, customer satisfaction and contribution to overall sales team and business success.

Key Responsibilities

· Troubleshoot and repair complex PLC systems in the machine.

· Responsible for carrying out general maintenance work and general electrical repairs, troubleshooting and maintenance of machines and equipment in the company and customer site.

· Provide sales speech to the customer on the technology and services offering.

· Maintain good customer relationship and feedback whatever customer needs and comment to sales and management.

· Attend to enquiry on project works, opportunities and provide quotations accordingly to customers.

· Undertake any relevant tasks as may be directed by the superior from time to time.

· Perform project management and customer site duties as assigned.

· Willingness to attend in-house or external technical training to improve skill set provided by the company.

· Proactively look for business expansion opportunities and new customer for the company.

· Maintain the inventory and stock count in the warehouse. Packaging and arranging of the goods for delivery to the customer.

Requisite Criteria & Skills

· Diploma in Mechanical or Mechatronics or Electrical Engineering with 1-year experience.

· Coordinate projects with different vendor and clients to ensure timely delivery and customer satisfaction.

· Able to generate additional sales and get new customer for the business.

· Good in troubleshooting and repair of PLC assemblies. Knowledge in electrical PLC circuits and PLC programming.

· Able to work independently and adapt to a dynamic working environment.

· Need to travel within the Singapore.

Willing to learn and pick up new skills as required

Job Description:

1. To study contract documents, perform measurements and prepare Bill of Quantities;
2. To assist in contract administration, prepare progress claim(s) and liaise with the Client’s representative on claims and variation costs;
3. Call quotations, compare prices and prepare bill of quantities to arrive at the tender pricing;
4. To prepare budget statement monthly and review by Superior;
5. To keep the Superior informed of all contractual and site matters;
6. To review and verify the Subcontractor’s / Supplier’s claims and prepare payment certificates and to obtain approval from Superior, Project Manager and Directors (CE);
7. To attend site meeting and progress claim meeting;
8. Upon completion of each project, to monitor the respective project during the defects liability period;
9. To maintain the Quality System in the Department;
10. Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:Cooperate with employers and follow safety and health procedure;
    Report unsafe acts and incidents;
    Do not tamper with safety devices or perform wilful or reckless acts; and
11. Any other duties that may be assigned from time to time.

Job Duties:

· Develops project objectives by reviewing project proposals and plans; conferring with management.

· Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.

· Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.

· Confirms product performance by designing and conducting tests.

· Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.

· Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.

· Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.

· Controls project costs by approving expenditures; administering contractor contracts.

· Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.

· Maintains safe and clean working environment by enforcing procedures, rules, and regulations.

· Maintains product and company reputation by complying with state regulations.

· Contributes to team effort by accomplishing related results as needed.

Core Responsibilities:

1. To support and coordinate design and manufacture projects.

2. To prepare production drawings by drafting or 3D modelling using CAD software.

3. To carry out process planning using ERP.

4. To liaise with the Engineering team on the preparation of BOM list.

6. To use engineering tools to test and implement efficiencies in quality, manufacturing, assembly and testing.

7. To provide engineered technical solutions to achieve improvement objectives.

8. To provide customer support/liaise/coordinate/follow-up with external customers on assigned projects.

9. Support in-house improvement projects given by the Operations Department and Management team.

Requirements:

1. Bachelor Degree in Mechanical Engineering or other related discipline. Both diploma and ITE holders with relevant working experience may also apply.

2. Ability to interpret engineering drawings and carry out drafting or 3D modelling work.

3. Possesses good knowledge of machining processes and technologies.

4. Possesses good project management and coordination skills.

5. Proficient in MS Office applications, Adobe Acrobat, AutoCAD, NX and GD&T.

6. Mature, organized, meticulous, task-oriented and able to handle tasks independently. Must be a team player.

7. Good communications skills.

8. Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner.

9. Experience with CNC machining and machine measurement will be advantageous.

Responsibilities:

· Plan equipment, material, and manpower requirements to execute job orders

· Monitor the execution of production plan and resolve any potential issues in a timely fashion

· Monitor production progress and ensure that final product meets quality standards and customer specifications

· Escalate complex issues to Manager for resolution

· Analyse back orders, current orders, and upcoming orders to prioritize, plan, and schedule the production operations
- Work with Estimation, Purchasing and Production teams in coordinating and planning production activities to improve runtime

· Adhere to company standards and production policies to meet company objectives

Requirements:

· Diploma/Degree in Mechanical Engineering

· Minimum 3 years of experience in similar role would be ideal

· Well verse in both manual and CNC machining

· Excellent knowledge in fabrication, aircraft jigs & fixtures, mechanical assembly, and aircraft maintenance tooling

· Knowledge of MRP systems is essential

· Able to read and understand technical drawings

· Self-motivated and ability to work under pressure

JOB DESCRIPTION:

• Monitor and oversee project administrative work

• Assist and support assigned Project Manager

• Preparing of quotation and invoices

• Liaise with external clients

• Ad-hoc duties as assigned

REQUIREMENTS

• Good interpersonal & communication skills

• Must speak Mandarin to liaise with Chinese-speaking clients

• Familiar with Microsoft Word & Excel

• Mon - Fri (9am - 6pm) / Sat (9am - 1pm)

• 2 Saturday Off per month

Responsibilities:

• Take charge of warehouse/logistics operations (e.g., picking, packing, binning, loading and unloading cargo)
• Receive goods and arrange outgoing export of goods
• Arrangement of local delivery schedules
• Perform SAP and in-house developed ERP transactions.
• Perform cycle count and stock taking
• Ensure proper housekeeping of warehouse area
• May require to operate forklifts to move or store inventory

Requirements:

• Physically fit
• Physically able to lift up to 10 - 12 kg
• Able to work in a fast-paced environment
• Familiarity with inventory software, and able to upload data into the SAP system will be preferred
• Having prior warehousing experience will be advantageous

Responsibilities:

• Send RFQs (request for quotes) to vendors to source for aircraft components;
• Tabulate received quotations;
• Check component New Unit Prices/ Manufacturer List Prices via OEMs/ Boeing/Airbus portals;
• Extract invoices from SAP and send to Program team to raise Requisition for payment purpose;
• Process and do coding for credit notes;
• Resolve PO mismatch & invoice discrepancies;
• Follow up with QC team to perform PWGR of PO line items;
• Update Kofax/SAP with remarks and return workcycle;
• Raise e-PR for monthly ILS invoices;
• Raise e-PR for purchase of namecards or office supplies; etc

Requirements:

• Require excel knowledge and skills.
• With relevant years of experience will be considered as Senior role.
• SAP &/or Qliksense knowledge & skills will be preferred.
• Follow up with QC team to perform PWGR of PO line items; team as well as work independently.

Job Description & Requirements

Carry out preventive and corrective maintenance of fire protection system such as fire alarm system, sprinkler system, hosereel system, hydrant system and fire extinguisher.

O Level / Nitec / Higher Nitec / Diploma in Engineering.

Class 3 Driving License preferred. Suitable candidates may be allowed to drive home company van.
With / Without Experience.

5.5 days work

Gold Star Aviation is looking for an Aircraft Maintenance Engineer for Private Jet – BBJ.

Key Responsibilities:

• Plan, manage, prepare and issue all maintenance work packages, and ensure that all maintenance tasks are completed and recorded as maintenance records.
• Request quotation from MRO for schedule/unscheduled tasks, and follow up with maintenance performed by MRO and ensure all tasks are performed I.A.W. regulatory requirement and ensure quoted man hours are justified.
• Conduct audits of completed paperwork to ensure completeness and accuracy.
• Communicate and liaise with service providers for long and short term maintenance planning and support.
• Ensure prompt response to BBJ maintenance requests and general inquiries.
• Aircraft Maintenance Program development and management, reliability monitoring and rectification planning
• Airworthiness Directives (AD) evaluation and compliance monitoring
• Manufacturer Service Document evaluation and suggestion
• Maintenance activities workload forecast.

Requirements:

• Applicant must hold either FAA A&P Mechanic License, CAAS or EASA.
• Must have attended EASA APPROVED maintenance type training course -B737NG(600,700,800).
• Have worked on B737NG aircraft for minimum of 5 years.
• Has been certifying maintenance tasks for minimum of 3 years.
• Knowledge of T7 regulations and industry standards.
• Post-Secondary education in Engineering or related discipline
• Able to use MYBOEING FLEET to access manuals.
• Able to do minor maintenance tasks, before/after flight checks, NAV DATA updates and provide certificate of release to service.
• Based in Singapore and need to travel occasionally as an on-board engineer.
• Proficiency in Microsoft Office and other relevant software.
• Must be a team player and able to work alongside with company staffs, cabin and flight crew.
• Ability to work under pressure with good decision making.
• Excellent command of both spoken and written English.
• Preference will be given to candidates with experience in corporate jet engineering and/or CAMO engineering.

If you meet the above requirements, please submit your application via email to [email protected]. Only shortlisted candidates will be contacted for an interview.

Jet Aviation, a wholly owned subsidiary of General Dynamics (NYSE: GD), has been enabling global flight with passion since 1967. From a single maintenance hangar in Basel, Switzerland, to some 50 locations and 4,000 employees worldwide, our offering includes Aircraft Management, Aircraft Sales, Charter, Completions, Defence, FBO, Maintenance, and Staffing. We are the effort behind effortless. The dream of flying has always been a human fascination, evoking emotions and the sense of freedom. Modern business aviation attracts people who share that passion. People from all over the world converge at Jet Aviation, creating a unique cultural mix. They combine their competencies and passion with one common mission: to serve customers best!

As a Licensed Aircraft Maintenance Engineer, you will;

• Deliver and oversee aircraft inspections, modifications, maintenance tasks, repairs, within license scope
• Always ensure safety and maintenance quality
• Ensures the timely and accurate recording of work performed on the aircraft
• If needed, perform oversees off-base aircraft projects without supervision.
• Supports Aircraft Maintenance Supervisors in coordinating with and functionally overseeing Technicians to perform tasks.
• Comply with all Aviation Security, Quality, Environmental, Health and Safety (SQEHS) and airworthiness requirements.

Minimum Requirements:

• Valid B1/B2 license holder without limitations (preferably CAAS or EASA)
• Gulfstream, BBJ or ACJ is preferred Aircraft type rating
• English language capability to communicate, read and understand maintenance, safety or quality manuals or documentation
• Effective communication skills to exchange technical information
• Ability to manage priorities of the job effectively and efficiently

Responsibilities:

• Responsible for providing complete analysis, estimate, and studies for all deliverables involved in the assigned scope.
• Identify design and constructability issues and analysis to determine constructability.
• Develop detailed cost estimates from engineering drawings.
• Act as a connection between subcontractors, design team and client.
• Determine required but non indicated scope through the analysis of site conditions and all contract documents (plans specifications, etc.)
• Collaborate with operations staff to ensure that General Conditions and Requirement items are appropriately captured in the estimate.
• Perform assessment on subcontractor proposals to ascertain if scope is covered.
• Assist in auto-cad drawings and drafting.
• To undertake any other duties as assigned by the supervisor when necessary.

Requirements:

• Bachelor or Diploma in Mechanical Engineering or equivalent.
• Candidates without the necessary qualifications but with relevant experience will be considered.
• Minimum 3 years’ experience in the fields of engineering, manufacturing, servicing, and repair of aircraft tooling, GSE’s, and/or similar equipment.
• Sound working knowledge of engineering principles, GD&T, materials, surface & heat treatments, and equipment testing.
• Candidates with experience in a manufacturing environment including machining, steel and aluminium fabrication, welding and sheet metal work will have an advantage.
• Competent in the use of MS Office applications.
• Conversant with the relevant international and aviation standards.
• Equally adept as a team leader, a team player or independent worker.
• Must be able to multi-task and communicate effectively (oral, written and videoconferencing).

Degree in C&S and had at least 5 years experience on site

Knowledged in CAD & SkeetchUp & Microsoft Project

Able to comunicate in multiple language and most important is understand and comunicate in English

Able to work independently, co-ordinate site work, handle meeting with Consultant and provide administrative support to company.

Have enthusiasm in construction work.

Job Description & Requirements

1)Ensure contractor carries out daily works that follow specification and regulations.

2)Monitor quality of precast components for daily production and delivery.

3)Ensure daily production and deliveries are able to cope with site schedule and progress.

4)Inspect all new mould and ensure is ready before proceed for casting of new component.

5)Monitor daily production records and delivery records.

6)Daily inspection for pre-pour of pre-cast component and finished products’ delivery.

7)Planning and schedule for daily production works.

8)Ensure that daily production works are carried out by using latest drawing.

Any other ad-hoc duties assigned

Singaporean / Singapore PR only

The successful candidate will be a young graduate with a Mechanical / Material Degree. Join us to materialise your projects and enrich your skills, within an internationally renowned organization recognized for its technological excellence.

You will progress in all industrial fields in the face of digital and decarbonation challenges: Industry of the Future, energy transition, internet of industrial objects, smart data, etc. You will be exposed to a wide spectrum of industries, ranging from marine, oil and gas, utilities to aerospace.

Key Responsibilities:

• Work on various industrial cases in APAC regarding: Failure Analysis, Forensic Engineering, Residual Life Assessment, Non-Destructive Testing, Risk-based Inspection, Simulation etc.
• Lead projects that are part of a virtuous circle: R&D, development of innovative skills, technology transfer, commercial engineering, and industrialization solutions.
• Work in a multicultural and multi skills team in Singapore, Morocco, and France.

Requirements:

• Degree in Material Science / Materials Engineering / Mechanical Engineering
• Strong analytical and organizational skills with ability to manage multiple tasks/projects and timelines
• Excellent oral and written communication skills
• Self-motivated, confident, and able to work independently as well as in a team
• Prepared to work at site and in the laboratory
• Fresh graduates or 1 – 2 years of experience

Responsibilities:

• Monitoring the production and reporting progress
• Strategizing the development process, including raw materials and machinery
• Collaborate with operations staff to ensure that General Conditions and Requirement items are appropriately captured
• Assist in auto-cad drawings and drafting
• To undertake any other duties as assigned by the supervisor when necessary.

Requirements:

· Polytechnic diploma in Mechanical Engineering with Electrical knowledge.

· At least 2 years’ experience in similar role.

- Salary will commensurate with experience.