Responsibilities:

- Assist Project Manager on project and site management.

- Assist Operation Manager to coordinate site activities and resources.

- Assist PM to carry out works according to Master Work Programme:

a) Prepare 2-weekly work programme for resources planning.

b) Conduct coordination meeting to prepare Daily Work Programme to coordinate resources with Operation.

c) Prepare Daily Report to monitor Progress and Status of Works.

d) Report status of work progress, problems encountered during Weekly Project Meeting.

e) Solving technical issues on site.

f) Assist in liaising with Client, SO’s Rep, RE, RTO and any other authorities, contractors and neighbours.

g) Coordinate with Site Supervisors, Safety Personnel, Sub-Contractors, Vendors, Suppliers, etc.

h) Assist QS on progress claim and VO.

Requirements:

- Diploma/Degree in Civil Engineering or equivalent qualifications

- Minimum 3 years relevant working experience in Civil and Structural

Job Description

● Successful candidate is expected to exercise due diligence and provide immediate full-time supervision according to the plans of building works approved under section 5 of the Building Control Act;

● Must comply with his/her statutory duties with regard to the supervision of works on site as stipulated in Building Control Act and Regulations; and

Report to and work under the direction of Qualified Person for Supervision [QP(S)] and/or Senior Resident Engineer.

Requirements

● Possess Degree in Civil & Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board

● Must be literate in English and have a good knowledge to use computer, computer software, such as Microsoft Word, Excel and Power point.

● Familiar with Microsoft Project to keep track and monitor the Project.

The candidate should demonstrate good technical knowledge, possess a strong, mature and proven ability to organize, manage and motivate the site staff team and use sound judgment in relation to construction matters.

Senior Resident Engineer (SRE):

● At least 10 years of site experience and/or experience in the supervision of Civil Engineering works; and

● Site supervision experience in waste management related projects and/or utility (power/ oil & gas/ petrochemical) related projects would be an advantage

Resident Engineer (RE):

● At least 5 years of site experience and/or experience in the supervision of Civil Engineering works; and

● Site supervision experience in waste management related projects and/or utility (power/ oil & gas/ petrochemical) related projects would be an advantage

Interested applicants to reply to:

[email protected]

Submit resume with photo including current and expected salary and contact no. latest by 30 September 2024.

Job Description & Requirements

• Completing all tasks set by the supervisor and assisting wherever possible.
• Designing and building hardware systems
• Recommending new hardware designs
• Performing tests of new hardware and software
• Troubleshooting and debugging hardware and performance issues
• Supporting the hardware engineering team
• Providing technical support for hardware issues
• Understanding and following industry-standard processes and procedures
• Collaborating with other engineers

Position : Site Engineer

Roles and Responsibilities

· Maintain inspection records of works, materials and all completed works

· Keeping track on variation and claims of contract and cost impact and feedback information to the Project Manager

· Implement cost control measures to meet project budget

· Site co-ordination with all concerned parties and to resolve site issues

· Plan and schedule work sequences for construction operation, according to the Project Management Plan.

· Liaising with consultants on design analysis, design work, design check for approval and to resolve technical issues on site.

· Site inspection for civil work, which includes excavation, structural, casting and ensure that the work is executed as per the project specification and construction drawing/final approved drawing from authorities.

· Ensure worker carried out meet out quality standards and contractual requirements.

· To control materials, plan the overall schedule and implement specific planning measures

Requirements:

· Bachelor's degree in Civil Engineering or relevant field

· Minium 3 years of project environment experience

· Able to work independently and possess good problem-solving skill.

· Superior civil, structural, or architectural engineering working knowledge of plans, engineering drawings, specifications and schematics associated with the mechanical and plumbing trades

· Computer literacy. Significant experience with Excel, Word, and other computer based tools

· Excellent communication and organizational skills

· Proficiency in Autocad or Tekla Software

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 3 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Salesforce Engineer

Contract 12 months

Job Description

The responsibilities include:

• Provide technical solutions and recommendations based on user stories/ user requirements.

• Execute on development/configuration projects (such as developing Apex classes & triggers, custom user interface development, etc) independently

• Provide proper documentation for software functionalities and technical specifications

• Keep abreast of latest Salesforce developments and ensure adherence to Salesforce best practices

• Implementation of batch classes to enable data migration without data loss and corruption.

• Creation of user-friendly and visually appealing designs with custom styling to support dynamic versions of the components when setting up in Lightning App builder.

• Building Lightning Components via Lightning App Builder to facilitate component development.

• Database modelling, data sets deduplication, data querying from a custom object to a standard object, and performance of DML operations with consideration of governor limits.

• Resolving code coverage issues and writing test classes.

• Development of custom objects, custom reports, and dashboards for sales and marketing needs.

• Creation of custom fields and validation rules for new and existing objects and custom functionality using custom controllers and custom extensions.

• Maintenance of user roles, application-level security, system-level security, single Sign-on configuration, and customized security rules.

• Design and development of Apex Classes, Controller Classes, extensions, and Apex Triggers across multiple objects and applications for various functional needs.

• Integrating with third-party solutions that are already installed and running on the client’s systems.

Requirements

Development/Customization Experience

• Apex development

• Visualforce page development

• Lighting components development

• Experience in 3rd party API integrations

• Experience with Data Loader

• Bachelor’s degree in computer science or software engineering or relevant Certification

• Prior work experience in the development of applications and software

• Hands-on experience with scripting languages like MYSQL, JavaScript, Apex, Native & VisualForce

• Proficiency in the Salesforce CRM platform

• In-depth experience with designing customer-facing interfaces

• Fundamental object-oriented programming techniques (OOPs)

• Basic knowledge of Java, C#, and .Net

• Apex DML, Apex Triggers, Apex Testing, Batch Apex

• Data management and modelling competence

• Understanding of Salesforce Object Query Language (SOQL) and Salesforce Object Search Language (SOSL)

• Experience in building and maintaining sites hosted on Force.com or Site.com

• Expertise in Lightning Framework

• APIs & Integrations

• Basic understanding of the development and maintaining Customer communities.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the Tech Aalto Privacy Policy, a copy of which is published at Tech Aalto’s website (https://www.techaalto.com/privacy/)

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Roles & Responsibilities:

· Engineering support to the pre & post-sales service activities

· Able to understand and has a good knowledge in electronics (e.g. Electronic Circuit Diagram)

· Able to read and draw floor plans and schematic diagrams using AutoCAD

· Proficient in writing daily reports

· Perform project coordination, system installation, termination, testing & commissioning

· Perform user operation training of the system installed

· Perform field service to troubleshoot and rectify system fault

· Required to carry out standby duty for servicing and answering calls

· Attend site coordination meeting and site walk

Requirements:

· NITEC and or Diploma preferably in Analogue, Digital and or Computer Electronics/Electrical.

· Minimum 2 years of relevant working experience

· Knowledge in electrical termination and troubleshooting is an advantage

· Knowledge of computer skills and software such as Microsoft (Excel, Word, PowerPoint)

· Proficient in using Autocad

· Able to communicate well in written and verbal communications

· Able to work independently and adapt to a dynamic working environment quickly

· Able to work under pressure to meet project deadlines and multiple accounts/projects.

· Excellent problem solving and negotiation skills

· Organized, fast learner, proactive, able to multi-task and with positive attitude

. 5.5 days working

Job Title: Application Engineer

Working Hours: Monday to Friday, 8:30 AM to 6:00 PM

Job Responsibilities

Reporting to the General Manager, the Application Engineer will focus on enhancing operational efficiency by implementing technological solutions such as Microsoft 365. The key responsibilities include:

1. Business Analysis Work closely with end-users to identify workflow inefficiencies and suggest improvements
   Translate business requirements into technical solutions and develop applications to drive value
   Conduct business analysis to identify bottlenecks and optimize processes
   
2. Microsoft 365 Apps Implementation Provide guidance on using Microsoft 365 apps to enhance work efficiency
   Automate manual workflows using Microsoft Power Platform (Power Apps, Power Automate, Power BI)
   Manage schedules and coordinate with stakeholders and vendors to implement solutions
   Perform end-to-end testing, troubleshooting, and provide user support
   Develop user documentation and conduct technical training for staff
   

Job Requirements

• Proficiency in Microsoft 365 Technologies, SharePoint Online, and AppSheet
• Expertise in workflow automation using Power Automate
• Knowledge of business process automation, procurement, and accounting systems is an advantage
• Microsoft certifications (e.g., MS-900, PL-900, PL-100, PL-200, PL-400, PL-500, or PL-600) are a plus
• Fresh graduates with relevant skill sets are welcome to apply

Job Highlights and Benefits

• Annual performance bonus and increments
• Team bonding activities and birthday vouchers
• Medical, dental, and leave benefits
• Education sponsorship and fully paid external training
• Company transport is provided from the nearest MRT (one-way)

How to Apply
Interested candidates may send their resumes to [email protected]. Only shortlisted candidates will be contacted.

Roles & Responsibilities

Job Title: Application Engineer

Working Hours: Monday to Friday, 8:30 AM to 6:00 PM

Job Responsibilities

Reporting to the General Manager, the Application Engineer will focus on enhancing operational efficiency by implementing technological solutions such as Microsoft 365. The key responsibilities include:

1. Business Analysis Work closely with end-users to identify workflow inefficiencies and suggest improvements
   Translate business requirements into technical solutions and develop applications to drive value
   Conduct business analysis to identify bottlenecks and optimize processes
2. Microsoft 365 Apps Implementation Provide guidance on using Microsoft 365 apps to enhance work efficiency
   Automate manual workflows using Microsoft Power Platform (Power Apps, Power Automate, Power BI)
   Manage schedules and coordinate with stakeholders and vendors to implement solutions
   Perform end-to-end testing, troubleshooting, and provide user support
   Develop user documentation and conduct technical training for staff

Job Requirements

• Proficiency in Microsoft 365 Technologies, SharePoint Online, and AppSheet
• Expertise in workflow automation using Power Automate
• Knowledge of business process automation, procurement, and accounting systems is an advantage
• Microsoft certifications (e.g., MS-900, PL-900, PL-100, PL-200, PL-400, PL-500, or PL-600) are a plus
• Fresh graduates with relevant skill sets are welcome to apply

Job Highlights and Benefits

• Annual performance bonus and increments
• Team bonding activities and birthday vouchers
• Medical, dental, and leave benefits
• Education sponsorship and fully paid external training
• Company transport is provided from the nearest MRT (one-way)

How to Apply

Interested candidates may send their word formated resumes to [email protected]. Only shortlisted candidates will be contacted.

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

· Planning, coordination, and execution of substation automation projects.

· Design, costing and integration of substation automation systems according to project requirements.

· Installation, testing and troubleshooting of substation automation systems at site.

· Preparation of project documents and drawings.

Requirements:

· Diploma in Electrical Engineering/Computer Engineering

· Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Requirement

• Diploma/Degree in Information Technology/Computer Science or any related study
• At least 2 to 3 years of experience in Networking
• Skills/Experience on Palo Alto

Responsibilities

• To provide Network Support, Incident Management. Monitoring on new incidents
• Troubleshoot and resolve system issues
• Upgrade of firmware of devices.
• Service Request Fulfilment
• Responsible for the infrastructure network design, implementation, testing, security, managing and maintenance of proposed system
• Configure and maintain network hardware, including routers, switches, firewalls, and load balancers.
• Manage project tasks to meet schedule, cost and quality
• Work closely with Team Leader/Project Manager to meet system delivery milestones

Interested applicants, Please send your updated resume in Word format to [email protected]

Please indicate Job Code 109 on email subject

We regret that only shortlisted candidates will be notified.

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1104129

Please visit www.itcspl.com to learn more information about ITC

Summary:

• 5 days, 830am-6pm
• Location : West
• Company transport provided
• Entry Level are welcome to apply, training will be provided

Job Description:

• Understand business needs to develop valuable applications.
• Collaborate with end-users to find workflow improvements and address bottlenecks.
• Turn user requests into clear technical requirements.
• Offer guidance on using Microsoft 365 apps to boost work efficiency.
• Automate workflows by building apps using Power Apps, Power Automate, and Power BI.
• Coordinate with stakeholders and vendors for application development and implementation.
• Test, troubleshoot, and support end-users throughout the process.
• Maintain applications and create user guides for future reference.
• Provide training to improve staff skills in Microsoft 365 and other tools.
  
  Requirement :
• Candidate with good Knowledge of Microsoft 365 Technologies, SharePoint Online, AppSheet and Workflow automation using Power Automate will have added advantage

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | See Yew Jin (R22103957)

EA License No: 20C0358

Job Description

• Position: Mechanical Engineer (HVAC)
• Well Established Marine & Offshore MNC
• 5 Days Work Week
• Salary (commensurate with experience): Up to $5,500
• Working Location: Tuas
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Marine & Offshore

Main Responsibilities:

• Involved in all mechanical engineering designs, calculations, preparing bill of materials, and liaising with customers and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Technical review and clarifications with customers and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Identifying the Company scope of work in the project.
• Solving technical issues that arise in the project.
• Monitoring the progress of document submission.
• Some drafting scope and guide drafters for drafting.

Requirements:

• Minimum Diploma in Mechanical Engineering.
• At least 3 years of project management experience in HVAC in the marine & offshore industry.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculations and can operate lighting software like Dialux etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Knowledge of basic fire and gas detection.
• Knowledge of basic HVAC electrical and instrumentation.
• Able to operate MS office (minimum Word and Excel).

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

Job Responsibilities:

• Skilled in using software engineering tools
• Capable of documenting requirements and specifications
• Enthusiastic about solving problems and delivering effective solutions
• Strong analytical and reasoning abilities with a talent for visualizing processes and results
• Experienced in troubleshooting software issues and debugging extensive codebases
• Excellent communication skills with a collaborative approach
• Advanced problem-solving and debugging skills with a keen interest in investigation
• Proven experience in customer service or technical support, with a drive to exceed customer expectations
• Ability to manage and enhance existing customer relationships through high-quality support
• Dedicated to providing the best possible customer experience
• Experience with mission-critical systems is a plus
• Any other ad hoc duties as assigned by supervisor.

Requirements:

• Software development skills in languages such as Java and C++
• Knowledge of various operating systems like Windows and Linux
• Familiarity with databases such as MS SQL
• Understanding of algorithms and data structures

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Position title : Process Engineer

Location: Sembawang

Working Days: Mon-Friday , 5 working days

Working hours : 9am-6pm

Salary : SGD 2,500 – SGD 3,800

Key Skills and Qualification

• Diploma/Degree in Mechanical Engineering. Minimum 3-4 years of working experience in relevant field. Working experience in sheet metal environment an advantage.

• Able to travel and work independently.

• Able to read drawings and understand welding symbols, surface finishes and tolerances.

• Knowledge in Solidworks, AutoCad and ProE software

Job Scopes & Responsibilities

• Create CAD & technology using machine software from Turret / Laser NC programming.

• Create development drawings from customer’s drawings (complicated parts & structures).

• Provide engineering support for production processes and assemblies.

• Design sheet metal product according to customer’s requirements.

• Able to led a team to determine the project steps and approaches (NPI)

• Monitor, follow-up and periodically reviewed project progress.

• Design innovative tooling solution in order to reduce production cost, improve product quality, process efficiency and support product development to meet customers’ requirement.

• Develop and maintain documentation of processes and procedures (WI)

• Provide detail drawings and bill of materials for equipment and sub-assemblies.

• Liaise with in-house Engineers & Technician on assembly and testing.

• Willing to travel on an occasional basis, both domestically and internationally to support the Engineering team when required.

• Configure semiconductor backend equipment.
• Align equipment/modules and perform vision alignment and calibration.
• Conduct machine checkout procedures.
• Provide technical support on-site, both domestically and internationally.

Requirements:

• Nitec in Engineering or equivalent.
• At least 1 year of relevant working experience
• Proficient in machinery automation, including electrical, servo, sensor, and pneumatic systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Assistant Engineer (CCTV)

Salary: $2000 to $3000 + OT

Working Hours: 5 Days (8.30am to 6pm)

Working Location: Jalan Bukit Merah (Redhill)

Job scope

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

Requirements

• At least ITE or Diploma in Electrical / Electronics
• 1 year working experience in installation in the field of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC literate
• Must have Class 3 license
• Knowledge of electrical & electronics

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• $2000 to $3000 + OT
• Address: Jalan Bukit Merah
• 5 Days 8.30am to 6pm

Requirements:

• At least ITE or Diploma in Electrical / Electronics
• 1 year working experience in installation in the field of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC literate
• Must have Class 3 license
• Knowledge of electrical & electronics

Responsibilities:

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Jobscope

• Develop Manufacturing/Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe/Models.
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensuring the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians on the process and procedures as required.
• Ensure we adhere to our approved procedures and update these as required.
• Own one or more multiple equipment/GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Requirements

• Degree in Engineering, preferably in Chemical Engineering or Degree in Science with major in Chemistry, biomedical science
• Preferably 0-3 years’ experience in a relevant manufacturing environment.
• Able to commit to rotating shift

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA License Number: 99C4599

Responsibilities:

- Provide technical support to customers via Phone, Chat, Email and onsite support

- Support handling will be 7x24 and rotating shift is required

- Diagnose faults and troubleshoot technical issues

- Communicate complex technical concepts in layperson’s terms

- Managing and interpreting customer requirements - listening to clients and using astute questioning to understand, anticipate and exceed their needs

- Coordinate with other Technical Support team members to escalate cases with unresolved issues to respective product vendor

- Maintain a close-loop with the product vendor to identify and support new product solutions based on direct and indirect prospect feedback as well as security industry trends.

- Any other ad-hoc duties as required or assigned

- Continuous Learning in IT industry, particularly new security products and solutions.

Requirements:

- IT or relevant discipline

- 1 years+ technical experience, preferably in onsite technical support

- Experience with cybersecurity solutions deployment is preferred

- Strong communication skills particularly over the phone and with email

- Ability to work individually and within a highly collaborative team setting.

- Highly motivated, fast learner, passionate to learn new product solutions and technology.

Interested applicants please send your resume to [email protected]

Venessa Goh Wee Ni

Technology Recruiter

Recruit Express Pte Ltd

EA License No: 99C4599

RCB No.: 199601303W

EA Personnel Registration Number: R24124686

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea