NATURE OF THE JOB

Principal activities of this job are analyzing customer’s problems, collecting and recording product and technical information, to summarize findings, to report product troubles as well as contractual troubles on each assignment. Further, to direct the assigned labor force, which may be Elliott's own labor, customer supplied or contracted and to ensure that equipment is built to the required standards and procedures relating to installation, commissioning, start-up, repair or maintenance work of customer's equipment.

SPECIFIC JOB RESPONSIBILITIES /COMPETENCIES

• Ensures all work is performed in a safe manner to prevent injury to personnel or equipment, i.e. ensures that safety, quality and schedule are obtained.
• Adheres to instructions and guidelines as described in the quality and HSE management systems.
• Can be asked to assist in the quotation process for minor projects.
• Handles and coordinates technical issues of a project, such as installation, commissioning, trouble shooting or maintenance.
• Schedules and allocates personnel and material to execute work scopes, plans and prepares minor projects.
• Performs safety planning and detailing on minor projects as well as the technical job preparation and planning.
• Conducts investigations of product trouble including performance problems and takes corrective action as directed by the Field Service Manager/Senior Service Engineer. May exercise independent judgment and corrective action plan depending on the nature of the trouble and availability of communication lines.
• Provides technical direction and assists Field Service personnel on other assignments as directed.
• Supervises, directs and controls customer personnel, hired labor and Service Representatives in the installation, start-up, repair or maintenance of equipment.
• Participates in the training of customer’s and own personnel.
• Issues work method statements.
• Conducts experimental programs for development of modifications to field equipment.
• Acts in Site Manager capacity while directing work on Elliott equipment as well as on non-Elliott equipment. Makes customer courtesy calls to check inventories and promote the sale of parts, inspect new shipments, and sell service in conjunction with the Service Sales Engineer.
• Keeps Field Service Manager/Support Engineers promptly and thoroughly informed on all work performed, quality, performance and equipment problems, customer’s reaction to equipment, and future sales potential.
• Keeps installation back charges from customers and/or mechanical contractors on a minimum through good judgment and prompt action.
• Responsible for contributing new ideas to improve product design and appearance, enhance company service, and eliminate troubles.
• Issues Service Reports promptly and completely noting particular instances with dates and names of persons connected with these events.
• Promotes customer good will through effective communication and cooperation with customer’s personnel.

Roles & Responsibilities

Roles & Responsibilities

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Instrumentation & Control System Sow

Job Description: Automation Service Technician/Engineer

The job description:

Engineer to service/support all automation equipment designed and developed to manufacture/fulfill Princess products/orders. The support includes but not limited to machine/equipment commissioning, maintenance, installation, yield improvement, trouble shooting.

Responsibilities:

1. Service Engineer is responsible for electrical and mechanical maintenance and trouble shooting. Improve machine/equipment reliability reduce unscheduled downtime.

2. Ready to be hands-on to bring up machines.

3. Knowledge of PLC, Sensor, motors and IO modules.

4. Knowledge of real time PC base control system.

5. Communicate with Design Team to analyze failure to avoid repeatable unscheduled downtime.

6. Supply technical information, hardware and software requirement to enhance/upgrade equipment performance i.e. Yield, UPH etc

7. Ability to analyze data and provide evidence-based recommendations improve products design and reliability.

8. Drive FYP quality and action plan

9. Provide data to drive for accurate spare part planning and buying.

Qualifications:

1. Bachelor degree preferred, but diploma with many years of experience is encourage to apply.

2. Mechatronic or mechanical experience with at least 3 years relevant engineering work experience in large manufacturing plant or automation industry.

3. Adequate knowledge of PLC system, Laser engraving and Camera vision inspection technology application

4. Knowledge of national electrical standard, Strong self-learning ability

5. Familiar with industry automation theory and electric power system

6. Electric automation design ability and experience of electric equipment installation is preferred.

7. Knowledge of maintenance system i.e. TPM etc. and electric safety

8. Experience in Project management is preferred.

9. Excellent verbal and written communication in English language.

10. Verbal and written communication in Chinese is a plus point

Job Info:

• Salary: Basic from $3000 - $4000 + AWS + VB
• Working Hour: Monday - Friday (8am - 5:45pm)
• Location: Jurong East MRT/ Joo Koon MRT

Job Scope:

• Provide End User Communication (EUC) Support to users, including laptops, monitors, mobile devices, and Office applications
• EUC Devices product life cycle management
• EUC software licensing compliance management
• EUC trend analysis and recommendation
• Report issue resolution within Service Level Agreement (SLA)
• Manage IT assets as per recommended useful life
• License compliance
• Monitor Server backup, update, maintenance etc
• Assist in network equipment upgrade, maintenance etc
• Assist in vendor management for infra-related projects

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Roles & Responsibilities

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Instrumentation & Control System Sow

Responsibilities

• Study the working flow between Technical, Production and Material, including the form, procedures, information flows, and system designs.
• Integrate Lean manufacturing Philosophy in the process of redesign
• Time study for the production process and ergonomics
• Under smart factory renovation, coordinate the activities, like facilitating the meeting, doing the necessary analysis, and providing the ideas from IE concern to the problems.
• Develop Workflow / Work instructions in the operation to control
• Carry out the analysis for production, QAQC, MMD. E.g., production scheduling, machine maintenance, QAQC quality VS cost, logistic & Store management analysis.
• Lead the ESG Smart factory initiatives as the company's ambassador and coordinated all meetings

Requirements

• Degree in Mechanical Engineering or relevant
• Knowledge of Factory automation
• Familiar with MS office
• Good communication and presentation skills
• Understand technical drawing
• Energetic and resourceful

We are seeking a Senior Project Manager to advance digital transformation projects and support Government Corporate Applications!

• Join a team that utilizes technology to contribute to significant government projects, enhancing the daily lives of Singaporeans.
• Agile working environment that fosters continuous learning and growth.
• Competitive salary package and comprehensive benefits provided.

Responsibilities:

• Develop project plans, including timelines, milestones, resource allocation, and risk management strategies.
• Ensure Service Level Agreements for projects are met.
• Lead and manage technical projects from initiation to closure, and contribute to project activities such as Requirement Gathering, User Acceptance Testing, Training & Implementation.
• Monitor project progress and performance, identifying and addressing issues or risks proactively to prevent delays or cost overruns.
• Review project deliverables. e.g. functional specifications, system test plan & results, user guide, operation manual.
• Facilitate meetings, workshops, and discussions to gather requirements, resolve issues, and make key project decisions.
• Identify potential project risks and its implication to the organisation and to recommend mitigating measures to manage the risks.
• Outsourcing and Contract Management to oversee, manage multiple vendors and external providers of ICT services, work with team members from application and infra teams, to deliver project on time and within budget.

Job Requirements:

• Singaporean only.
• Skilled in managing corporate applications and adept at troubleshooting across various domains, including applications, infrastructure, and security.
• Bachelor’s Degree in Information Technology, Computer Science, or related fields is preferred.
• Prior experience of at least 4 years in IT project management.
• Experience in AWS cloud and Microsoft Products (Related certification will be an added advantage).
• Project management-related certification (PMP, CITPM, etc.) is advantageous.
• Working experience in Agile methodologies.
• Previous involvement in government projects/ Familiarity with IM8 is advantageous.

Interested candidates may apply via email to [email protected] (indicating Job ID J44185 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – Outsourcing Team
ScienTec Consulting Pte Ltd – 11C5781

• Design complte electrical control system for HVAC System, Process, F&B & Machine Automation.
• Design Network Architecture based on customer requirements to proposed on design level.
• Design and Develop and PLC Programming using STL, Ladder, SFC in Siemens, Omron, Schneider and AB PLC.
• Electrical control Panel designing, wiring, testing and controls including drafiting.
• VFD Drive Configuration, Commissioning and documention Support.
• Prepare Electrical Drawings and Project documentation works.
• Prepare all necessary documentations related to projects including tenders.
• Assist on-site works, including testing and commissioning.
• Strong knowledge on communication protocol such as, ASCII, DALI, M-Bus, BACnet, TCP/IP, Modbus RTU, IOT, WIFI.
• Visit Customer Site to understand the requirements and to provide the suitable and cost-effective solutions.
• Professional communication with client during the installation process providing status of the job.
• Ensure and maintain works quality/standards according to project specification.
• Assist in procurement, sourcing of materials, quality checks
• In-Depth Knowledge of electrical safety, designing practices and Standards (IEC, NEMA, ANSI).
• Coordinating with Technical team to on daily basis to moitor and update the work activity.
• Set up and troubleshooting equipments during debugging.
• Cost analysis& estimates, budgeting, Risk analysis.
• Preparing sales quotations for customers.
• Do regular site visits and follow ups, provide on-site trouble shooting support.
• Report day to day activities to the management.
• Prepare weekly report on workers schedule(update if necessary), assigning works, prioritising works, allocating manpower for the projects.
• Other ad-havoc duties assigned by the management.

Requirements:

• Recognised Degree in Electrical Engineering, Building/ Construction/ Automation engineering or Diploma.
• Minimum 4 Years of relevant working experience in building management system, industrial process automation industry expertise.
• Proficient in using Auto Cad is must.
• ¨ Good Technical knowledge (taking measurements, estimating cost, construction technologies, document preparation, electrical controls & drawings).
• ¨ Familiar with professional practice and contract administration process & regulations (Singapore).
• ¨ Ability to work as proactive team player.
• ¨ Highly – motivated.
• ¨ Good Communication and written skills in English.
• ¨ Candidates should have analytical approach for problem solving and possess strong decision-making skills.
• ¨ Able to work at short time frame & meticulous (challenging due dates).
• Able to work meticulously and not bounded to time
• Able to meet up with long and tough work schedule

Responsible to generate detailed, scaled casing connector drawings, prepare engineering work instruction and procedural specifications, provide technical support to sales function, supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all locations across the region.

**Position Overview:**

The IT Support Engineer is a key member of the IT department responsible for providing technical assistance, troubleshooting, and support to end-users within the organization. This role involves resolving hardware and software issues, setting up and maintaining systems, and ensuring smooth technology operations to enhance productivity and minimize downtime.

**Key Responsibilities:**

1. **Technical Support:**

- Respond to user inquiries and technical issues via phone, email, or in-person promptly and professionally.

- Diagnose and resolve hardware, software, and network-related problems efficiently.

- Provide step-by-step guidance to users on issue resolution or workaround solutions.

2. **End-User Assistance:**

- Assist users with software installations, updates, and configurations.

- Educate users on best practices for using hardware, software, and applications effectively.

3. **Hardware and Software Maintenance:**

- Install, configure, and maintain computer systems, laptops, printers, and peripherals.

- Perform regular updates, patches, and security measures on software and systems.

- Troubleshoot and repair hardware components as needed.

4. **Network Support:**

- Troubleshoot network connectivity issues, both wired and wireless.

- Assist in setting up and managing network devices, such as routers, switches, and firewalls.

5. **System Administration:**

- Maintain user accounts, permissions, and access levels.

- Assist in the administration of servers, domains, and other IT infrastructure.

6. **Documentation and Reporting:**

- Maintain accurate records of support requests, resolutions, and actions taken.

- Provide reports on recurring issues, trends, and improvements to management.

7. **Remote Support:**

- Provide remote assistance to off-site users, ensuring their technical needs are met.

8. **IT Projects:**

- Collaborate with the IT team on various projects, such as system upgrades, migrations, and implementations.

9. **Training and Knowledge Sharing:**

- Conduct training sessions or workshops for users to enhance their IT skills and knowledge.

- Share technical knowledge with colleagues to foster a learning culture.

**Qualifications:**

- Bachelor's degree in Information Technology, Computer Science, or related field (or equivalent experience).

- Relevant certifications (e.g., CompTIA A+, Microsoft Certified: Azure

Fundamentals) are advantageous.

- Proven experience in providing technical support and troubleshooting.

- Strong knowledge of hardware, operating systems (Windows, macOS), and common software applications.

- Familiarity with network fundamentals, including TCP/IP, DNS, DHCP.

- Excellent problem-solving and communication skills.

- Customer-oriented approach and the ability to work well with end-users.

- Ability to work independently, manage priorities, and meet deadlines.

- Adaptability to changing technologies and environments.

**Benefits:**

include competitive salary, a dynamic work environment.

Responsible to lead a team of M&E personnels.

Acquire approval scope of works and ensuring compliance with regulations and project requirements.

Oversee and manage all aspects of the construction M&E works process.

In-depth understanding of project specifications, technical details and construction drawings.

Monitor and ensure that site progress is in accordance with the master program with no delay in works and proper work sequencing.

Attend site meetings with the client and all sub-contractors to review project progress.

Monitor and report project details including progress, risks and resolve MEP-related issues in a timely manner.

Define clear roles & responsibilities and deliverable requirements in terms of both scope and schedule to all project personnel.

Lead and supervise project personnel on site to ensure construction activities are carry out effectively and timely.

Assist to the Project Director and any other job-related ad hoc duties.

Candidate must possess at least Degree in Electrical, Mechanical Engineering or equivalent.

Proficient technical knowledge - measurement, cost estimating, construction technology and contracts.

Understand and be competent with professional practice and contract administration processes.

Required language(s): English

At least 10 Year(s) of working experience in the related field is required for this position.

Self-motivated with good team player and positive attitude.

Job Descriptions:

• To carry out mold and robot setting, trouble-shooting of Nano optical lens molding and Nano insert moulding defects, provide technical support
• Develop, optimize, and improve plastic manufacturing processes to enhance efficiency, reduce waste, and meet quality standards. This involves analyzing existing processes, identifying areas for improvement, and implementing changes to streamline production
• Identify and troubleshoot issues related to plastic manufacturing processes, equipment malfunctions, material defects, and quality deviations. Develop and implement solutions to address problems and prevent recurrence
• Document manufacturing processes, standard operating procedures (SOPs), and best practices to ensure consistency and repeatability. Develop and maintain process documentation, including work instructions, process flow diagrams, and equipment specifications
• Assist in technical support and troubleshooting for manufacturing operations
• Monitor manufacturing variances so that problem solving, and improvement opportunities are identified
• Provide timely resolution of product, process and equipment problems in the form of creative short-and long-term solutions
• Assist in development, testing and improving manufacturing processes for new and existing products that optimize operation, reduce product variability and increase yields
• Assist in planning, coordinating, developing, and executing test protocols, experiments, process characterization and process validations (IQ,0Q,PQ) on new and revised products and processes
• Assist in writing and updating standard operating procedures and other documentations required

Requirements:

• Minimum 2-3 years working experience in plastic injection moulding particularly in medical device manufacturing industry

Responsibilities:

Tender

- Evaluate tender requirements and translate them into technical specifications
- Evaluate propulsion system and piping systems that best meet tender requirements
- Formulate scope of work for contract
- Do material estimate for conversion tendering
- Do technical evaluation of equipment supplier proposals

Contract Drafting and Negotiation
- Participate in contract negotiations
- Negotiate scope of supply and services with suppliers
- Formulate equipment technical specifications for contract with suppliers

Design
- Technical discussion with equipment suppliers on system specifications
- Evaluate completeness and correctness of technical information from supplier
- Design engineering layout drawings based on customer's requirements
- Design engineering equipment layout drawings based on contractual requirement and inputs from other trades
- Design propulsion system, ship pining systems & HVAC based on contractual requirement, classification rules and inputs from other trades.
- Tabulate material and equipment list based on propulsion system drawings and piping, HVAC system drawings.
- Plan, manage, produce, and issue drawings to production and other trades to meet project schedule.
- Evaluate technical information of designing systems.
- Plan, organise and discuss engineering systems design with customer.
- Involve in technical discussion with other trades to resolve technical issues.

Test and acceptance
- Review acceptance test protocols
- Manage and do acceptance of system’s equipment during Factory Acceptance Test (FAT) to ensure it meets technical specification.
- Attend and support Harbour and Sea Acceptance Test (HAT & SAT) to ensure systems meet technical specifications

Documentation control
- Manage documents control for the department according to standard and practice.

Requirements:

• Degree in Marine, Mechanical Engineering or related discipline.
• Have knowledge of Marine Engineering systems design, preferably 3-5 years of direct experience.
• Possess knowledge of AutoCAD / 3D solidworks software.
• Good organisational skills, teamwork and interpersonal skills.
• Good time management and is able to meet tight deadlines
• Willing to do overtime when required

Other Information:

• Location: Tuas Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Roles & Responsibilities

Roles & ResponsibilitiesJob Description

• To plan, execute, manage, control and issue the ICSS engineering deliverables and deliver the ICSS package of the assigned project within the defined technical requirements, schedule, cost and quality so as to deliver the project successfullyUnderstand the ICSS design basis, project requirements including HSSE, scope, cost, schedule, quality requirements, client and class requirements and project execution philosophy.
• Plan, lead and manage ICSS team resources by identifying the work assignment for each team member in coordination with Project Lead I&C Engineer
• Plan, lead and manage the ICSS deliverables as per project requirements
  Direct and manage project work including issue of deliverables within schedule and quality
• Provide technical expertise on solving system engineering problems, monitor and control the project work by closely communicating with the team
• Identify improvement opportunities and innovative ideas.
• Guide the ICSS team on change management control, anticipate the technical issues and take preventive action to mitigate the risk.
• Closely coordinate with the team, project lead I&C engineer, inter-discipline communication, internal and external stake holders

Semco Maritime in Singapore is looking for commissioning engineers as an expansion of our engineering team engaged in Telecommunication Systems – PAGA, PABX, CCTV, GMDSS Radio System, VSAT System, UHF Repeater System etc. solutions for the Offshore and Onshore Oil & Gas Industry.

Job Tasks

You will be involved primarily in fabrication, installation, and commissioning of telecommunication systems.

You may also be required to assist lead engineer / project manager in the daily execution of ongoing projects.

Qualifications/Requirements:

• A Degree in Telecommunication / Electrical / Electronic Engineering.
• Some relevant working experiences in the Oil and Gas industry would be advantageous.
• Strong knowledge in various Telecommunication Systems, especially one or two of following:

1. GMDSS Radio
2. VHF Aeronautical Radio and Helicopter Navigation Beacon e.g. NDB
3. UHF Active Repeater System with TX & RX Combiner
4. Leaky Feeder and Passive Antenna
5. VSAT System with Stabilized Antenna
6. PAGA system
7. PABX system

• Hands-on experience on configuration, programming, troubleshooting, installation and commissioning of the above systems
• High responsibility and ownership on delivering high quality work within given project schedule
• Ability to multi task and work under pressure
• Team player with cooperation spirit and excellent coordinating skills, as well as capable of working independently
• Pro-active and have right working attitude
• Self-motivating and willing to learn
• Possess good interpersonal, communication and technical writing skills.
• Knowledge of application software e.g. Word, Excel, AUTOCAD etc.

You will be part of a dynamic worldwide team of engineers which will require your ability to work, and cooperate with local engineers as well as Semco’s engineers around the world.

Please send us your resume with the wording “Commissioning Engineer, Telecommunication” in the subject field, stating your credentials and past job experience with your application. Please state your expected salary, required time for notification and reasons for leaving your present position, if available.

We regret that only shortlisted candidates will be notified.

Job Requirements

· Lead Process Design Engineer for the Process Design of Storage Terminals, Process Units in Refineries and Chemical Plants which involves the Basic and Detail Design including the preparation of PFDs, P&IDs, System Description, Process Control Philosophy, Hydraulic Calculation, Heat Transfer Calculation, Heat & Material Balance, Relief System Calculations, Utility Consumption, Equipment data sheets & Instrument data sheets.

· Prepare Technical Proposals including preparation of PFDs, P&IDs, hydraulic calculations and system description.

· Design Calculations for Pumps, heating coils, Thermal Relief valves and Tank venting calculations.

· Analyze pressure relief design scenario and calculate the relief load and validate the results

· Prepare Process Data Sheets for Instruments, Equipments & Tanks.

· Review other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc.

· Participate in HAZOP and SIL study, Review HAZOP Report and prepare HAZOP & SIL Close-out reports.

· Participate in P&ID Design Review and Process Control Philosophy Review, and prepare review Close-out reports.

· Design of Fire Protection System as per NFPA for the Storage Terminal, which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Design of wastewater collection and disposal system for the Storage Terminal which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Prepare Surge Analysis report using Pipenet Transient Module.

· Development of automated excel spreadsheets for process calculations.

· Performing Simulation using Aspen HYSYS & Unisim

· Preparation of simulation report & HMB.

· Equipment Sizing and Preparation of Equipment Data sheets.

· Preparation of technical specification in line with the project requirements

· Performing Hydraulic calculation and preparation of Data sheets for control valves.

· Performing Relief load calculation and preparation of Data sheets for safety valves.

· Design of Flare system using Flarenet.

· Utility sizing and Preparation of Utility Consumption report.

· Preparation of Process Control Philosophy & Cause and Effect diagram.

· To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

· To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Chemical)

Experience

Preferably 10 years’ experiences

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word

3) Smart Plant P&ID

Code Knowledge

1) API 2000, API 520, API 521, API 526, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Job Description

• Lead and manage a team of Sub-contractors for all addition and alteration (A&A) work
• Plan, organize, co-ordinate and implement A&A work timely and ensure compliance to all authority and client's requirement
• Liaise with sub-contractor and vendor for quotations and purchase orders
• Evaluate project requirements and generate feasible proposals for work completion
• Liaise with client's appointed officer on all issues related to the A&A and project work
• Preparation and submission of shop drawings, point schedule, materials, write-ups, and other necessary items for approval
• Track and manage project progress and submit progress claims
• Lead, coordinate, and execute testing & commissioning works for A&A works with proper documentation
• Conduct site surveys, attend meetings on-site, evaluate installation progress on-site
• To arrange and provide servicing & maintenance works for active sites

Requirement

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• At least 1~3 years of working experience in construction or retrofit project in BMS/ACMV/Electrical/ELV
• Good knowledge of Building Services (BMS, ACMV or Electrical or ELV) and project management
• Proactive individual who can work independently
• Good interpersonal and Communication skills
• Able to multi-task and achieve deliverables on schedule
• Able to generate project reports via Word, Excel, Powerpoint

We regret only short listed candidate will be notified.

Job Description & Requirements

The engineer is to act as Electrical Commissioning Lead (entire Electrical Systems Lead), manage all Electrical system commissioning from preparation phase to execution phase.

Job Description

• During commissioning preparation phase, responsible to attend Supplier Kick Off meetings to roll out package related commissioning requirements, review of Supplier documents, review ITR assignment and provide inputs for commissioning schedule.
• Prepare and review system boundary, commissioning procedures and commissioning deliverables.
• Support Commissioning Manager and Commissioning Project Engineer in the preparation of required tools, utilities, first fills and others for the commissioning activities of Electrical systems.
• Electrical Commissioning Lead is responsible for successful and safe commissioning of their area / system following the commissioning strategy set by Commissioning Manager.
• Work closely with MC Coordinator, Commissioning Coordinator for timely completion of the ITRs, mechanical completion and commissioning completion.
• Supervise day-to-day electrical commissioning activities are complied with Company’s Standards and Procedures.
• Identify and integrate Safety, Quality requirements in the electrical commissioning activities to ensure safe operability and maintainability.
• Understands the Completions philosophy and Scope of Work by studying the applicable industry standards, Company standards, specifications and procedures.
• Manages electrical commissioning PTW, electrical commissioning engineers, assigned technicians, operations support, supplier support and CLASS witness to execute the approved commissioning procedure including performance standards verification successfully, sign off the test reports and support for the system dossiers completion until handover.
• Reports to Commissioning Manager and Commissioning Coordinator.
• Interacts with Engineers and internal stakeholders for the purpose of training, discussions, attending meetings and other project related requirements.
• Coordinates work requirement with commissioning assistant in order to prepare system boundary drawings and handover dossiers.

Requirements

• Educational Qualification: Bachelor in Engineering (Electrical)
• Relevant Experience: 7 years and above of relevant working experience in FPSO commissioning.

We're on the lookout for a top-tier Software Quality Engineer to join our team, delving into both Automation and Manual testing within our cutting-edge modules. We're seeking someone with exceptional communication skills, ready to dive into technical discussions and solutioning sessions.

• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package.

Responsibilities:

• Execute a range of tests, encompassing manual, functional, performance, and exploratory examinations, alongside User Acceptance Testing (UAT).
• Provide support in addressing issues encountered during testing and implementation phases, ensuring swift resolution.
• Collaborate closely with internal development teams, external vendors, and end-users to orchestrate seamless User Acceptance Testing (UAT), system integration evaluations, and performance assessments
• Champion the incorporation of cutting-edge technologies, methodologies, and tools within Agile software environments.
• Uphold stringent Quality Standards throughout the software development lifecycle, ensuring excellence at every phase.
• Execute both manual and automated test scripts.

Job Requirements:

• Bachelor's degree in Computer Science, Engineering, or related field.
• Minimum of 3 years of experience in software quality testing and automation.
• Proficiency in Cypress, Selenium and K6.
• Experience working in Agile development teams.
• Excellent communication and collaboration abilities
• Familiarity with other automation tools and frameworks will be an added advantage.

Interested candidates may apply via email to [email protected] (indicating Job ID J43758 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – Outsourcing Team
ScienTec Consulting Pte Ltd – 11C5781

Job Responsibilities

• Provide 24 X 7 technical assistance via phone,
• Troubleshoot CPE issues, Mobile Broadband, Web/Mail Hosting/setup, co-location and other ISP related products and services
• Coordinate with other departments and handle internal escalations
• Attend to faults and escalate if necessary. Common faults are outages, server failure, router, switch etc.
• Manage monitoring systems (eg. bandwidth monitoring, link monitoring, DDOS notification etc)
• Provide after-hours technical assistance to Data Centre (eg. handle customer visits, reboot server, DDOS issues, etc)
• Coordinate with other departments for basic troubleshooting support
• Ensuring alert for major project is being follow up closely and ensure that relevant department is being updated of the progress
• Ability to adapt quickly to ever changing priorities and handle multiple tasks simultaneously

Job Requirements:

• Degree/Diploma or equivalent with NOC experience
• Minimum 2 years of experience in a support/service environment with a keen interest in Internet Technology
• Preferably with CCNA certification or other network certifications
• Customer oriented, motivated and driven to explore new ways of doing things
• Team worker with good interpersonal, communication and writing skills
• Able to work within constraints and meet service levels
• Willing to accept new challenges and responsibilities
• Highly motivated with initiative
• Willing to work on rotating shift, inclusive of weekends and public holidays
• Customer focused attitude with ability to explain technical information to non-technical people with compassion
• Outstanding communication skills in English, both written and verbal

Roles and Responsibilities:

• Diagnose and troubleshoot compressors received at the workshop, as preliminary stage before execution of the service.
• Service, overhaul and test all compressor technologies in the company's portfolio, from reciprocating to screw compressors.
• Effectively communicate verbally and in writing with co-workers and when necessary, with customers.
• Recommend preventive measures and provide prompt and effective resolution to technical problems
• Duly maintain proper record for each service job, such filling service, inspection and test reports
• Follow up work orders for each job, maintaining checklist and daily time sheets.
• Work effectively in coordination with other departments in order to ensure a smooth and timely supply of required parts to complete service activities.
• Guarantee proper maintenance of workshop tools and equipment
• Conduct safety assessments of the working environment and to proactively propose improvement to enhance the efficiency of the operations
• Provide technical training for customers and technicians in the team.
• commissioning or commissioning assistance services, inclusive of verification of electrical panel, refrigerant charge adjustment, data recording and analysis
• Troubleshoot and identify potential failures of system and analyze compressor failure through operation data.
• Lift and shift to support customer in removal and reinstallation of compressors on the refrigeration systems

Requirements:

• Minimum of 5 years HVAC field service experience
• Knowledge in air-conditioning, chiller or HVAC systems
• Electrical and basic electronic background is required, must be independently able to troubleshoot and identify electrical control and power line failures.
• Diploma/Degree in Mechanical / Electrical Engineering or equivalent
• Able to work under pressure and in a fast-paced environment.
• Good in planning, organizing, interpersonal skills and able to work independently.
• IT Savvy, proficient in MS Excel and MS Word
• Must have experience working inside vessel

Added Advantages:

• Brazing or welding certification
• Safety certifications
• Possess class 3 driving license

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Purpose and Scope

• Provide maintenance works and plant equipment to support the Operation

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure.
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Experience in Plant Fire System and knowledge in Electrical System such as MV Switch gear, LV MCC, UPS, Soft Starter, VSD.
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualifications & Experience

• Degree in Electrical Engineering
• Minimum 3 years’ experience in a Power Plant or Utilities plant environment

Key Skills, Competencies & Behaviours

• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

Responsibilities:

• Lead and manage ACMV system design, installation, and commissioning in construction projects.
• Coordinate procurement of ACMV equipment and materials.
• Coordinate and liaise with consultants, main contractors, and sub-contractors.
• Perform tests, inspections, and commissioning of ACMV systems for proper functionality and performance.
• Prepare reports, progress updates, and documentation related to ACMV works for project management and client review
• Supervise and check sub-contractors’ works according to design drawings, specifications, and regulations.
• Generate incident reports.
• Perform all other duties as assigned and required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 3 years of working experience in the construction or mechanical related fields is required for this position.
• Required skills: Microsoft Office, Microsoft Project, and AutoCAD.

Roles & Responsibilities

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Instrumentation & Control System Sow

We are looking for Senior Telecom Engineers to join our dedicated people in Project Engineering team at Singapore office. The role in our Project Engineering team is to deliver the Telecoms Systems to our customers in the Oil and Gas, and Renewable industries.

If you enjoy the technical challenges and variety of working in a fast moving project environment then this may be the next career move for you.

Key Responsibilities and Tasks

You will work in a Project team and your responsibilities and tasks will include:

• Front End Engineering Design
• Preparation of engineering drawings & documents
• Preparation of specifications for procurement of equipment.
• Develop detailed system design; with diagrams and schematics including integration of systems
• Selection of equipment
• Develop bulk material listings
• Provide input for preparation of selected reports, weight equipment list, function and fabrication / installation.
• Calculation & studies (RF, Network, PAGA, CCTV, etc.)
• Provide accurate and detailed project documents and drawings
• Interface with sub vendors to ensure they meet the project requirements.
• Configuration and testing
• Support to the Service team
• Support to the tender and sales team
• Coordination with other disciplines

Who we are looking for

You shall have a relevant professional background with a Degree in Telecommunication subject and project engineering experience in the energy sector (Oil & Gas, Renewable, etc.). You must have proficiency on a wide range of technologies including Data Network, Voice, Radios, PAGA, CCTV, Metocean, Acess Control, Radar, VSAT, Navigation, Microwave, etc.

As a team player, you shall be organized with good attention to detail and having a positive attitude with a proactive and practical approach to work. You need to have excellent analytical and problem solving skills with a good understanding of IT and software based solutions. Fluency in English is essential.

Interested?

Please send us your resume, stating your credentials and past job experience with your application. Please state your expected salary, required time for notification and reasons for leaving your present position, if available.

Salary will commensurate with the relevant experience.

We regret that only shortlisted candidates will be notified.