Job Title: Assistant Engineer / Process Engineer

Location: Joo Koon

Working Day: Monday to Friday: 7.50 a.m. to 4.45 p.m.

Basic: up to $4000

Benefits: 14 Days Annual Leave, Variable Bonus, Company Transport, Canteen Subsidy

Roles & Responsibilities:

• Understand the Quality, Environment, Water Efficiency and Occupational Health & Safety Policy and Objectives including the environmental aspects and impacts, Safety risk assessment, etc
• Ensure the effectiveness of Quality & Environment Management System across the department and compliance with the legal & regulation.
• Conduct periodic solution analysis and replenishment.
• Support to implement environmental management operations and activities such as Control of chemicals, energy, water and waste. Improve the capacity of production and cost-down projects.
• To review and enhance the safety aspect of the production and inspection area.
• Report any quality, environmental, water efficiency, and safety to the relevant internal authority.
• To liaise with customers regarding production issues/ projects.
• To establish & review periodically the work instructions, process parameters standards (PMP) and FMEA.

Requirements:

• Diploma / Degree in Engineering, Chemical Engineering or related discipline.
• Minimum 2 years’ work experience in electroplating/semiconductor field.
• Independent and self-driven individual.
• A team player with good interpersonal skills.

WONG MENG KANG

Superform Consulting Pte Ltd

R1988500/15C7536

Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

Requirements:

· At least 5 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

Job description

(A) Primary Function

1. Responsible for all automation related activities of the product.

2. Responsible for the Maintenance and Repair of production automated machines.

3. Continuous to enhance quality and productivity through automated processes

4. Identify and initiate actions to prevent occurrence and recurrence of product, process, quality systems nonconformities

(B) Duties and Responsibilities

1. Optimise automation parameters and meeting specific cycle time for existing and new products.

2. To provide timely support to ensure efficiency of production machines & equipments are met.

3. To work with respective department on product quality issues.

4. Initiate containment plan and implement effective long term plan on quality related issues

5. Attend to all daily quality and process related issues.

6. Execute process validation for new and existing products with tooling and quality personnel.

7. Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.

8. Perform internal quality system audit.

9. Train and assess production staff on processes and product where applicable.

10. Attend routine production and quality meetings

11. Execute engineering change notice from customer.

12. Analyze quality data collected periodically and provide recommendation to management for improvement

13. Compliance to all regulatory and in house system requirements especially for medical and automotive customers

14. Perform additional tasks given by the management

Qualifications / Requirements

1. Degree/Diploma in Engineering-related discipline, preferably Mechatronics

2. Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA

3. Results-oriented, meticulous and a self-motivated team player

Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

Requirements:

· At least 5 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

Key Responsibilities

• Develop and implement maintenance schedules for vehicles fleet and equipment to ensure optimal performance and extend equipment lifespan.
• Conduct routine inspections and preventive maintenance to identify and address potential issues before they become major problems.
• Liaise with operations teams to address vehicle breakdowns and operational concerns, ensuring minimal downtime and maximum productivity.
• Manage receipt, maintenance, and monitoring of mechanical parts inventory to ensure accurate tracking and efficient use of resources.
• Prepare regular reports on maintenance activities and performance metrics to keep stakeholders informed.

Requirements

• Bachelor's Degree in Mechanical or Mechatronics Engineering or equivalent.
• At least 3 years of experience in vehicle maintenance and repair, preferably with experience in spare parts management.
• Strong analytical and problem-solving skills, with the ability to work independently and as part of a team.
• Prepared to work on weekends and 24 hours standby for breakdowns
• Must have a Class 3 Driving Licence

• Carry out planned inspection, maintenance & servicing of production machinery & equipment.
• Perform in-house troubleshooting, repairs and overhauls of fruits packing / packaging & food processing machinery & equipment including changing of parts.
• Independently find the best possible solutions to fix machinery / equipment breakdowns to minimize production lost time. Senior colleagues will be available for support when needed.
• Perform Calibration, Installation, Commissioning of new packing / packaging machinery / equipment
• Conduct proper technical & operation of machinery / equipment training to operators.
• Maintain machinery and equipment common spare parts inventory at a safety level.
• Keep track of maintenance service agreement renewal with customers

Job Description :

• Test program Development for Digital, Power Management , RF & Mixed Signal Integrated Circuits (IC’s) using Automated Test Equipment (ATE) for wafer sort and packaged IC’s
• Design Test Hardware Load board and Probe Card
• Work closely with the design engineers on the first silicon debug, device
  characterization, test program bring up and production release activities
• Debug of digital test patterns and Device characterization across PVT (Process, Voltage and Temperature)
• Involve on test program hand on, production release, yield improvement and test time reduction
• Operation of Automatic Wafer Prober, Test Handler
• High level of collaboration and interaction with different Hardware, Product
• Engineering, Design Engineering, Quality Engineering, and Foundry Engineering teams

Job Requirements:

• Minimum Degree in Electronics / Electrical Engineering , or Candidates with minimum, 2 years of experience
• Good Knowledge of Digital and Analog electronics, able to write scripts using Python is desired.
• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment .
• Strong verbal and written communication skills and able to work independently
• Result oriented and willingness to learn
• Selected candidates will be undergoing a training of six months and will be signing up for a contract of eighteen months after confirmation (Training period inclusive).

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

What do we have to offer?

Our IT Team presents phenomenal opportunity for a highly motivated and results-oriented individual. Join us in the adventure to explore innovative technologies to run state of art, operationally efficient and secure datacenters.

Looking to advance your career?

Micron is the place for you to expand your caliber by working on major projects, developing the leader in you! We provide online learning opportunities and on-the-job training to upgrade your skills.

What’s more? We provide peer mentorship to guide you through the process of learning new systems.

AN ORDINARY DAY OF WORK WOULD INCLUDE THE FOLLOWING:

• Involving in the application lifecycle management for software systems in a highly automated semiconductor manufacturing environment.
• Working with partners to conduct user requirement analysis and collaborate with global IT team to implement and deliver IT solutions for Manufacturing operations.
• Planning and leading user training and acceptance testing/verification for new software to ensure a good quality software release to production.
• Performing applications software and hardware maintenance to ensure high uptime
• Supervising system performance actively to identify abnormalities and develop capabilities to prevent unscheduled downtime.

THIS JOB IS FOR YOU IF YOU:

• Possess a Bachelor’s Degree in Electrical & Electronics/Computer Engineering, Computer Science or equivalent experience.
• Knowledge in any programming language such as C#/C++ programming, Java, Perl, HTML5 and SQL.
• Creative and have passion in implementing innovative IT solutions to tackle meaningful business problems.
• Good interpersonal and communication skills. Willing to work in a clean room work environment and dynamic team environment to achieve a common goal through effective collaboration and dedication.
• Able to provide 24/7 standby operation support.
• Able to travel when required.
• Applicant who have proven good software project management skill and had exposure to agile development methodology will be advantageous.

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Process in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Process, you will:

Provide engineering support for sustaining production and projects in the Medical and Life Sciences sectors. Responsibilities for sustaining production include quality, productivity, and process improvement. Project work may involve process development, characterization, and production start-up. Ensure all documentation complies with ISO13485 or respective product documentation requirements.

The key responsibilities are as below:

• Lead and provide engineering support and solutions for sustaining production and projects.
• Lead, participate in, and support projects such as line transfer and setup, process development, or automation.
• Provide timely engineering support to ensure the production line runs smoothly and meets operational goals.
• Collaborate closely with production teams and customers to resolve line quality issues.
• Improve and ensure line processes are controlled using SPC, Cpk, FMEA, and other statistical tools.
• Ensure proper maintenance of equipment and achieve uptime/OEE targets.
• Initiate, lead, and implement yield and productivity improvement projects.
• Write IOPQ protocols, perform validations, and manage reporting and documentation.
• Generate and maintain Assembly/Maintenance Work Instructions.
• Implement changes on the line through Engineering Change Notices (ECN).
• Provide training to Technicians and Operators.
• Ensure the production line complies with the ISO 13485 Quality System.

What skills and experiences are we looking for?

• Degree in Mechanical, Mechatronics Engineering, and/or equivalent experience.
• Knowledgeable in SPC, DOE, DFMEA, or plastics bonding process for assembly of medical devices.
• Experience in performing IOPQ protocol and validation or process development.
• Experience working with automated assembly line or supplier on automation project.
• Strong analytical and problem-solving skills, detail-oriented.
• Strong leadership qualities, independent, and a team player.
• Excellent communication and interpersonal skills.
• Enjoy working in cross-disciplinary teams.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Design Engineer in Singapore. The position will be based in our Univac office in Woodlands.

As a Design Engineer, you will:

Responsible for the creation of tooling concepts and the design of plastics injection mold, detailing high-performance molds in 3D.

The key responsibilities are as below:

• Design projects from concept thru final details
• Interacting with customers – conference calls to on-site design reviews
• Working with the shop to distribute and communicate the requirements of the project
• Participate in the First-Off Tool review and assess the suitability of the tool for production
• Report to upper management
• Identify technical risks and define mitigation plan
• Travel internationally to customer or supplier sites as projects require
• Resolving out-of-spec issues
• Be required to mentor and develop junior engineers as necessary
• Perform any other duties assigned

What skills and experiences are we looking for?

• Diploma in Precision Engineering, Mechanical, Manufacturing and/or any relevant engineering discipline with 7 years of relevant working experience
• Expertise in 3D modeling and knowledge in GD&T
• Experience in with evaluating and analyzing tooling issue
• Proficient in AutoCAD and Unigraphics
• Familiar with Design for Manufacture (DFM) who able to develop complex designs to the point of manufacture and release to production
• Knowing the manufacturing processes and has the knowledge in plastics and elastomers
• Experience in unscrewing, multi-shot, stack and high tolerance moulds, including mechanical design
• Proficient in Microsoft Office applications
• Excellent organizational and communication skills, including effective presentation of complex data
• Good leadership skills and a team player
• Flexible attitude towards work and eager to learn new skills
• Must be willing to work overtime as required

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Responsibilities:

• Provide L3 support in incident, request, change and problem management related to database operations.
• Provide oncall support, including outside of office hours, and participate in Major incidents.
• Ensure SLA for incidents and service requests are met with high quality of work.
• Ensure KPIs, such as breach case target, MTTR and escalation target is met.
• Install and upgrade database systems, apply patches and implement changes when required.
• Diagnose and troubleshoot database errors ensuring high availability of database systems.
• Manage databases access, backups and ensure compliance to database and security standards.
• Monitor database performance proactively and perform analysis of cases to prevent recurring issues.
• Review and enhance database monitoring when required.
• Develop processes and operation procedures related to database operations.
• Create and manage database reports, visualizations, and dashboards.
• Perform capacity planning and participate in Disaster Recovery drill.
• Provide global L3 support for sites in North America and Asia, including on weekends and holidays.
• Perform changes on critical databases related to manufacturing and engineering.
• Collaborate with site customers on new database requirements, problem resolution and data flow requests.
• Performance tuning of databases to ensure high performance and availability.
• Engineer solutions and automations to improve productivity and efficiency of database operations and reliability and availability of the database systems.
• Recommend and implement emerging database technologies.
• Participate in worldwide collaboration for technical sharing and reference architecture alignment.

Requirements:

• Bachelor’s or Master’s degree Computer Science, Electrical & Electronics/Computer/Software Engineering, Information Systems or related fields.
• Fresh graduates are welcome to apply.0-2 years experience
• Good understanding and hands-on experience in Microsoft SQL Server, Oracle Database, Linux and Windows operation systems will be advantageous:
• Programming and scripting languages such as Java, PowerShell and Python.
• Strong command of SQL and SQL server tools
• Effective oral and written communication with strong analytical, problem solving and project management skills.

The Computer Services System Engineer supports Computing Infrastructure support to Manufacturing sites. This role supports and maintains the data centers in the Singapore manufacturing sites with a scope of asset management and capacity planning, vendor management for mounting works and asset impairments. Apart from the L3 level hardware and OS support for MFG systems, this role also supports the Private cloud environment running on Hyper Converge Infrastructure. This role will require high proficiency in the hardware platforms for server and storage and domain knowledge to be able to troubleshoot and resolve escalated issues from the L2 support team. The Computer Services L3 will be expected collaborate closely with the site customers, site application teams and other Infra L3 teams in the resolution of issues and the fulfillment of service requests due to the higher complexity and the need to constantly communicate on technical details and implementation. This role will also be responsible to perform changes in critical computing and storage infrastructure supporting Micron’s manufacturing and engineering.

Responsibilities:

• Define, design and implement core computing and storage system hardware and operating system solutions
• Data Center Management for highly-secure, highly-available, operations-centric datacenter environments in Singapore sites with exposure to asset management and capacity planning, vendor management with mounting works, asset impairments and degauss works
• Provide L3 operational support with oncall support, including outside of office hours, and participate in Major incidents.
• Ensure SLA for incidents and service requests are met with high quality of work.
• Ensure KPIs, such as breach case target, MTTR and escalation target is met.
• Work alongside with our team of forward-thinking Engineers in our datacenter environments and interact with other technology teams, to build and maintain the Infrastructure for highly critical applications in those datacenter environments
• Perform changes in critical computing and storage infrastructure supporting Micron’s manufacturing and engineering
• Ensure security, availability, performance, interoperability and reliability of Micron’s core computing and storage resources with continuous improvement projects to ensure
• Collaborate with site customers and Engineering disciplines to develop Reference Architectures and technology standards based on Infrastructure Building Block for computing and storage environment
• Participate in Disaster Recovery planning and testing at the site level to ensure high class Infrastructure redundancy for computing and storage
• Continually work to improve operations and evolve the computing and storage environment to meet future demands
• Lead hardware and software refresh projects with strong collaboration with other technical teams and customers at the site
• Able to drive Engineering efforts in automation and monitoring for computing systems
• Direct the development and maintenance of technical documentation and align with server and storage administration best practices
• Participate in global IT troubleshooting events, global IT Project planning process and in rotational 24/7 Oncall for any local or global IT emergencies.
• Provide global L3 support for sites in North America and Asia, including on weekends and holidays.
• Review Level 2 case management process continually to improve operations by reducing the cases, minimizing escalations and evolve the computing environment to meet future demands.

Requirements:

• Masters / Bachelors Degree with good honors in any Computer Science/Engineering . 0-2 years of experein
• Strong analytical and problem-solving skills
• Passion to tackle business problems with application of technology
• Good communication and interpersonal skills with a problem-solving attitude
• Academic know-how or internship experiences in the Infrastructure domain of IT with Knowledge of management of
• Windows
• RHEL Linux OS
• Configuration of SAN/NAS environment
• Programming and scripting languages such as Java, PowerShell and Python.
• Splunk, Tableau or any analytics tools
• Desire to learn hardware and virtualization technologies like
• Cisco UCS, HPE ProLiant, Dell servers
• VMWare, Citrix
• Dell-EMC, NetApp, Pure Storage
• Familiar with scripting languages will be added advantage
• Certifications from Microsoft, RHEL, VMWare, Cisco, DELL-EMC, NETAPP will have an added advantage

Collaborate With Various Teams And Functional Areas In Developing And Improving Business Processes With Clear And Agreed-Upon Business Rules
Develop Process Improvement Strategies Across The Network
Prioritize And Manage Multiple Projects Based On Department And Corporate Objectives
Lead And Collaborate With Various Engineering Groups To Optimize Current Processes And Align The Network To Improve Manufacturability, Yield, Quality And Cost Performance Of Products
Work With Process Integration Team To Implement And Integrate New/Improved Process Workflow
Maintain Documentation For New And Improved Processes
Communicate Project Strategy, Status And Actions Through Meetings, Presentations And Reports To Team Members And Management
Monitor Process Stability Through On-Going Review Of Performance Metrics
Work With The Global Network Teams To Incorporate Micron Standards And Best Practices Into Local Site Network Builds.

Responsibilities & Task :

Plan, design, and analyze costs of network (wired and wireless), voice, data, and video infrastructure for mergers, acquisitions, and

new/existing site construction or expansion.

• Determine the needs of the site (bandwidth, network, etc.).
• Research new equipment based on needs and end of life for the equipment based on the IT Roadmap.
• Minimize the cost of new equipment within budget constraints.
• Analyze, compare, and determine the cost of implementing new technology or services.
• Participate in the project planning process.
• Determine, recommend, and coordinate needed equipment (routers, circuits, concentrators, switches, servers, etc.).
• Define the timeline for interaction with vendors, service providers, and business units for integration of services and systems.
• Integrate the current design of previously existing network into the Micron enterprise network.
• Coordinate and facilitate the integration and support for new equipment.
• Optimize the performance of new equipment.
• Determine equipment that needs to be retired and the replacement.
• Work with the global network teams to incorporate Micron standards and best practices into local site network builds.
• Collaborate with the IT Security team.

Provide operational support for network (wired and wireless), voice, data, and video infrastructure for the worldwide Micron enterprise.


• Determine the needs of the site (bandwidth, network, etc.).
• Manage and maintain the existing environment.
• Integrate and support new technology that requires network transport.
• Respond appropriately to alarms, alerts, and notifications for the environment from the management system.
• Maintain the information in the management system.
• Manage contractor support personnel in the operational tasks.
• Provide an escalation point for global operational network teams.
• Coordinate with vendors regarding updates to equipment and the equipment lifecycle.
• Monitor the needs of the site (bandwidth, network, etc.).
• Coordinate with vendors, service providers, and business units for upgrades of services and systems.
• Optimize performance of existing and new equipment.
• Configure and operate equipment that is supported.
• Document processes and procedures.
• Communicate the status of the unified network (wired and wireless), voice, data, and video infrastructure.

Provide formal corporate communications on directional changes or changes that will impact existing services.

• Keep business units informed on the status.
• Educate business units on the feasibility and limitations of the technologies in the environment.
• Respond to customer inquiries regarding network performance.
• Communicate and collaborate with peer groups (enterprise architects, security team, server team, etc.).

Requirements

• Require a Bachelor’s/Master’s degree or equivalent experience in Information System/Communication/Computer Science/Electronics/Network Engineering or equivalent , 0-2 years expereince
• Knowledge in Python Programming language
• Strong analytical and problem-solving skills
• Passion to tackle business problems with application of technology
• Good communication and interpersonal skills with a problem-solving attitude
• Academic know-how or internship experiences in the Infrastructure domain of IT with Knowledge of management of Network and Wireless technologies
• Desire to learn Network Appliances like DNS, DHCP, Loadbalancer, Firewall and Monitoring tools.

1. JOB DESCRIPTION

Job TitleSenior Sales & Application EngineerOccupationTECHNICAL SALES ENGINEERJob Description & Requirements
Due to business expansion, a dynamic company dealing with industrial components has immediate vacancy for the position Sales & Application Engineer

The Job:

Responsible for achieving salestargets by executing sales plans to increase sales through developing new markets/customers & retain existing customers
Develop & maintain good rapport with customers to achieve total customer’s satisfaction
Manage & administer to sales enquiries promptly & professionally

Requirements:

Diploma / ITE in Electrical or Electronic Engineering
Min. 5 years relevant experience in industrial electrical components sales in infrastructure industry, lift elevators, building automation system, security system, power & water utility etc..
Excellent selling, presentation & negotiation skills
Good team player who is proactive, independent & resourceful
Result-oriented & perform well under pressure with a drive to succeed
Must possess class 3 driving license & own a car

Interested candidates are invited to apply with a comprehensive resume, stating expected salary and date of availability together with a recent photograph and email to [email protected]

Responsibilities include, but not limited to:

• Demonstrate Micron core values People, Innovation, Tenacity, Collaboration, and Customer Focus
• Collecting requirements from customer requests
• Designing, developing, debugging, documenting, testing, and deploying applications
• Collaborating with other developers on the team
• Working closely with Business Operation Teams, Product and Application Development teams, and other internal customers during application development and deployment
• Training users on the use and maintenance of new applications
• Implement 3rd party solutions and partner with the IT Procurement representative to determine contracts, support requirements, training provided, etc.

Requirements:

• Bachelor’s degree in Computer Science, Software Engineering, or a related field.
• Strong understanding of software development principles and methodologies.
• Proficiency in at least one programming language (e.g., Java, Python, C++).
• Familiarity with web development technologies (e.g., Angular, HTML, CSS, JavaScript) is a plus.
• Basic knowledge of database systems (e.g., SQL, NoSQL).
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.
• Eagerness to learn and adapt to new technologies.

Preferred Qualifications:

• Internship or project experience in software development.
• Knowledge of version control systems (e.g., Git).
• Understanding of Agile development practices.

Analyzes, designs, programs, debugs, and modifies software enhancements and/or new products used in local, networked, cloud-based or Internet-related computer programs. Code may be used in commercial or end-user applications, such as materials management, financial management, HRIS, mobile apps or desktop applications products. Using current programming language and technologies, writes code, completes programming, and performs testing and debugging of applications. Completes documentation and procedures for installation and maintenance. May interact with users to define system requirements and/or necessary modifications.

Job Description & Requirements

• Working closely on construction plans with clients, architects, and other professionals
• Investigating the properties of materials like glass, steel, and concrete, and advising which is the most suitable
• Working out the loads and stresses on different parts of a structure
• Inspecting unsafe buildings and recommending options for repairs or demolition
• Making sure that projects meet legal guidelines, environmental directives, and health and safety requirements
• Giving progress reports to clients and senior managers.
• Requirments:
• Diploma/bachlor Degree in Civil Engineering or its equivalent
• Minimum 5 years of HDB/residence experiences as Project Engineer/Site Engineer in construction industry of Singapore.
• Proficient in Microsoft Project
• Basic computer skills to edit Microsoft, AutoCad, PDF & Etc.

Job Description & Requirements

• Working closely on construction plans with clients, architects, and other professionals
• Investigating the properties of materials like glass, steel, and concrete, and advising which is the most suitable
• Working out the loads and stresses on different parts of a structure
• Inspecting unsafe buildings and recommending options for repairs or demolition
• Making sure that projects meet legal guidelines, environmental directives, and health and safety requirements
• Giving progress reports to clients and senior managers.
• Requirments:
• Diploma/bachlor Degree in Civil Engineering or its equivalent
• Minimum 5 years of HDB/residence experiences as Project Engineer/Site Engineer in construction industry of Singapore.
• Proficient in Microsoft Project
• Basic computer skills to edit Microsoft, AutoCad, PDF & Etc.

Job Description:

• Design and configure mechanical components and systems to integrate new machines into existing production lines or processes.
• Create and review detailed 2D and 3D CAD models and technical drawings for custom machinery and modifications.
• Develop system layouts and schematics to ensure compatibility and efficiency of integrated machinery.
• Oversee the on-site installation and commissioning of integrated machines, ensuring that they operate as designed.
• Provide technical support and adjustments during the startup phase to ensure smooth operation.
• Prepare detailed technical documentation, like operation manuals.
• Maintain accurate records of design changes, test results, and integration processes.
• Work closely with clients to understand their specific needs and requirements for machine integration.
• Develop custom solutions tailored to the client's production environment and goals.
• Provide training and support to clients or end-users on the proper operation and maintenance of integrated systems.

Job Requirements:

• Bachelor's Degree in Mechanical Engineering, Mechatronics Engineering.
• Experience with AutoCAD, SolidWorks, or similar CAD software for mechanical design.
• Minimum 2 years experience in machine integration, automation, or mechanical design

Job Responsibilities:

1. Responsible for creating and developing detailed 3D models of buildings or infrastructure projects using BIM software such as Autodesk Revit, AutoCAD, or Bentley MicroStation, etc.

2. To update and maintain the BIM models and drawings to reflect any design changes, construction progress, or as-built conditions and ensure accuracy of shop drawings.

3. Keep the models and drawings up to date and ensure that the information remains accurate and reliable.

4. Using Common Data Environment (CDE) to manage the process of exchange and coordination of BIM model with consultants, client, and stakeholders.

5. Knowledge of Coordinated Combined Services Model (CCSM).

6. Generate shop drawings for preliminary, construction and as-built stages from BIM model.

7. Produce completeness shop drawings as per detail given by engineer/manager and ensure drawings and ensure drawings submission schedule is achieved.

8. Knowledge of Combined Services Drawings (CSD), Structural E&M Drawings (SEM), Concrete Body Plan (CBP) & Wall Setting Out Plan.

9. Ensure that BIM deliverables and documentation follow BIM Execution Plan (BEP) or requirement/instruction as stipulated.

10. Able to manage internal coordination meetings to resolve identified design or construction issues which affected the model.

11. Manage model data to facilitate model coordination between multiple disciplines and sub-contractors.

12. Coordinating with site personnel and subcontractors regarding update on drawings and generating Clash Detection Report.

13. Other ad-hoc duties assigned.

Requirements:

1. Diploma/Degree in Structural/Architecture/Engineering/Construction/MEP or equivalent.

2. Minimally 1 year experience in BIM Modeling work in building construction and project execution.

3. Knowledge and experience in Revit, AutoCAD, Navisworks.

4. Experience in LTA / MRT projects is advantageous.

5. Good communication, writing & interpersonal skills.

6. Having a positive attitude and proactive mindset.

7. Adaptable to working both independently and as a team player, with the ability to work under pressure and meet submission deadlines.

8. Fresh graduates are welcome to apply.

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add a Manufacturing Engineer in Singapore. The position will be based in our GES Site in Marsiling.

As a ManufacturingEngineer, you will:

Work hand-in-hand with Product Engineer, the Test Engineer is responsible for providing technical and engineering supports for sustaining product manufacturing as well as supporting NPI, in meeting products’ specification, customer requirements and organization goals and objectives.

The key responsibilities are as below:

• Monitor, maintain and improve assembly/test first pass yield
• Perform first level production line/equipment fallout verification to resolve line issues quickly without impacting production output and follow up until closure
• Work with Product Engineer to have effective RCCA and resolution to product quality issues
• Coordinate with cross-functional team to implement actions required to evaluate and qualify necessary manufacturing process, SW/FW, tester/equipment or product/component changes
• Provide training to line operators and technicians on assembly and test
• Keep shop floor MES up-to-date arising from changes
• Rectify malfunctioned equipment/tester
• Ensure preventive maintenance is executed
• Follow up on equipment calibration
• Identify and work on Continuous Improvement such as First Pass Yield improvement, cycle time reduction, digitalization, waste elimination, productivity improvement, process automation and etc
• Support VAVE activities
• Preparation of FPY and RCCA report

NPI:

• Assist to/execute Prototype builds, Pilot Build and Engineering build
• Create and maintain Work/Manufacturing/Process Instruction
• Establish and maintain PFMEA and Control Plan
• Perform DFX (DFM, DFA, DFT)
• Production line set up and qualification Production Line setup and equipment planning for new project launch, define manufacturing line layout, sourcing for tooling, fixtures and equipment and prepare CAPEX
• Perform equipment/tester set up and validation/buy off for commissioning
• New process development and qualification
• Perform assembly/test cycle time and touch time analysis

What skills and experiences are we looking for?

• Candidate must possess at least a Diploma in Electrical/Electronic Engineering or equivalent
• At least 2 years of working experience in the related field. Experience in EMS environment will be an added advantage.
• Experience in Jig & fixture development
• Experience in validation/verification/calibration
• Experience in Root Cause Analysis and CAPA with the use of Quality tools
• Familiar Quality tools and techniques (Control Charts, Pareto Charts, cause and effect, etc.)
• Familiar with ISO9001 and ISO13485 requirements. Knowledge in QMSR will be an added advantage.
• Familiar with BOM structuring, Change Management, Yield reporting, Root Cause Analysis (RCA) and systematic problem-solving methodology
• Familiar with Lean Manufacturing and Kaizen
• Knowledge of mechanical measurements such as motion accuracy, force, temperature, vibrations, and pneumatics
• EE component and circuitry knowledge, EE test and measurement know-how in using various test equipment for troubleshooting EE issues (DMM, oscilloscope, spectrum analyzer & etc)
• Knowledge of test execution software such as Labview, Python, TestStand, Visual Studio and etc is an added advantage

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Job Description & Requirements

• Working closely on construction plans with clients, architects, and other professionals
• Investigating the properties of materials like glass, steel, and concrete, and advising which is the most suitable
• Working out the loads and stresses on different parts of a structure
• Inspecting unsafe buildings and recommending options for repairs or demolition
• Making sure that projects meet legal guidelines, environmental directives, and health and safety requirements
• Giving progress reports to clients and senior managers.
• Requirments:
• Diploma/bachlor Degree in Civil Engineering or its equivalent
• Minimum 5 years of HDB/residence experiences as Project Engineer/Site Engineer in construction industry of Singapore.
• Proficient in Microsoft Project
• Basic computer skills to edit Microsoft, AutoCad, PDF & Etc.

Woodlands

Mon to Fri 8.30am to 5.30pm

Salary up $3000-$4800

Have AWS & bonus

Job Description

• Review quote requests in detail and ensure all quotes for Module line are provided within the set Lead time
• Follow up with manufacturing for New Product Introduction and ensure they are manufactured as per spec and delivered on time.
• Follow up with Manufacturing and ensure effective implementation.
• Co-ordinate with Planners and ensure material is received on time for new products
• Develop, evaluate, and improve manufacturing methods continuously
• Involve in Failure analysis for any customer returns
• Drives suppliers for cost reduction along with SCM team
• Perform other duties as requested by managemen

Requirement

• Bachelor’s degree / Post Graduate Diploma in Industrial / Mechanical / Mechatronic / Electromechanical Engineering or equivalent
• At least 2 years relevant working experience
• Able to prepare quotation
• Able to read mechanical drawing

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

ASM is a leading global supplier of products, services, and materials for semiconductor processing. For more than half a century, innovation has been at the core of everything we do. Our smart, ambitious people are dedicated to creating cutting-edge solutions for the world’s leading semiconductor providers. Every day we push the development of next-generation computer-chip technology, always staying a few steps ahead of what’s next.

The talented, enthusiastic people at ASM are just like you: dedicated to improving people’s lives and unlocking new potential. With our collaborative approach to R&D, we advance key semiconductor technologies and platforms like ALD, epitaxy, PEALD, PECVD, and vertical furnaces. And we have recently entered the promising high-growth market: silicon carbide epitaxy. Year after year, our innovations help to make chips smaller, faster, and more powerful. In fact, you will find our technology in every aspect of modern life: in AI, medical equipment, 5G, smartphones, autonomous driving, and more.

Advanced Analytics is a newly created function in ASM Global Operations target to reimagine and reinvent how advanced analytics, artificial intelligence and intelligent automation can help to revolutionize Operations, improve various business outcome and drive innovation. We are looking for an experienced, driven AI Engineer to join us as the key team member to architect and build our AI and automation solutions, showcasing the potential for AI through early-stage solution, and innovate solutions and drive outcome towards our “Digital Twin for Operations” future. This is an excellent opportunity to take advantage of emerging trends and AI technologies and make a real-world difference.

Duties and Responsibilities:

• Leads the creation of a company’s AI and Intelligent Automation, and Digital Twin architecture with varying frameworks and deployment models to devise and execute AI architecture strategy.
• Define AI architecture and guide leaders and decision-makers in choosing compatible technologies.
• Work closely with AI leaders and AI program managers to help move forward, integrating AI into existing systems and prepare systems for new AI programs and applications to keep pace with emerging trends.
• Design and develop advanced analytics and AI/ML models, systems, infrastructure and solutions for Global Operations Business Functions.
• To have detailed understanding problem statement, analyze business problems, identify data sources, extract, transform, process, simulate outputs, test, productionize and maintain solutions.
• AI.ML Operations – Automate and integrate data and AI solutions development and deployment: Identify and prioritize opportunities and develop proof of concepts for AI/ML/algorithmic application to automate manual business process executions, build systems and solutions that can integrate into existing systems.
• Implement models and converting them into application programming interfaces (APIs)/ Microservices aligning to the AI architecture and strategy.
• Work with other team members, including IT, data analysts/ scientists, digital engineers and AI leaders, to support digital transformation.
• Collaborating with security professionals to manage potential risks and implement AI technologies, applications, and infrastructure in keeping with ethical policies.

Requirements

• Bachelor/ master’s degree or equivalent in computer science/engineering or related specifications.
• Minimum 5 years work experience in Data Analytics, Data Science, AI/ML projects
• Adaptability and continuous learning to stay up to date with latest development in AI, new tools, technics and advancements emerging all the time.
• Hands on E2E Data Analytics project experience and statistics/ML algorithms concepts application
  ERP / SAP R/3/ S4 HANA/ Oracle / Manufacturing / Supply Chain / Purchasing / Logistics / Quality /
• Engineering business process knowledge.
• Proven track record in solution deployment across functions.
• Analytical with good interpersonal and communication skills; able to build influential relationship with internal stakeholders, Critical thinking and complex problem-solving skills are vital.
• Ability to adapt to a fast-paced work environment.
• Experience with ML, deep learning, Computer Vision, TensorFlow, Python, NLP. Knowledge in Generative AI .
• Other Attributes that will lead to success on the role will include collaboration, strategic thinking, and results driven.
  

At ASM we are committed to supporting our people, enabling them to develop their talents and perform at their best. We actively promote an inclusive and diverse culture that fosters trust and transparency. Our people are our power, and we value the differences between everyone because it is what make us better as a team. By embracing a wide range of perspectives, we enable a culture of continuous exploration and adoption of new ideas. At every step, we know that it is our valued people who enable us to deliver excellent products and service to our clients – and to make a meaningful difference in society.

So join us on our journey and unleash the power of an open mind. Discover how you can be part of our exciting future and apply today! To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram and YouTube.

ASM is a leading global supplier of products, services, and materials for semiconductor processing. For more than half a century, innovation has been at the core of everything we do. Our smart, ambitious people are dedicated to creating cutting-edge solutions for the world’s leading semiconductor providers. Every day we push the development of next-generation computer-chip technology, always staying a few steps ahead of what’s next.
The talented, enthusiastic people at ASM are just like you: dedicated to improving people’s lives and unlocking new potential. With our collaborative approach to R&D, we advance key semiconductor technologies and platforms like ALD, epitaxy, PEALD, PECVD, and vertical furnaces. And we have recently entered the promising high-growth market: silicon carbide epitaxy. Year after year, our innovations help to make chips smaller, faster, and more powerful. In fact, you will find our technology in every aspect of modern life: in AI, medical equipment, 5G, smartphones, autonomous driving, and more.

Job Description

• Lead the Global Operations (GOPS) team (Manufacturing, Production Planning, Procurement, and Quality Engineering) with emphasis on manufacturing processes, cycle time, assembly sequence, and quality.
• Provide engineering support in resolving daily operation issues in semiconductor equipment manufacturing, through collaboration with a team of multidisciplined manufacturing engineers, manufacturing supervisors and technicians.
• Achieve daily targets on product delivery to global customers in alignment with manufacturing engineering strategies, production schedules, quality and safety standards.
• Perform systematic troubleshooting and root cause analysis of manufacturing issues and deviations, provide immediate containment actions, and pursue long term corrective solutions.
• Actively engage with Business Units (BU) to influence Design for Manufacturing (DFM) concepts in reducing labor cost and material cost to meet the overall product cost targets at different Product Life Cycle (PLC) phases
• Prepare and present on Manufacturing capabilities, strategies and readiness to meet product lead time and cost targets from BU in new product toll gate review meetings.
• Constantly engage Field Support and BUs to build the capability of the Engineering team on the equipment and process knowledge of ASM equipment.
• Define and create manufacturing procedures, build sequence, methods, and quality documentation (i.e. work instructions, test procedures, inspection checklists, etc.) according to material and assembly specifications
• Drive timely solutions for the suppliers, contract manufacturing, and internal manufacturing by liaising with cross functional teams in GOPS and BU
• Lead the execution of continuous improvement projects on quality, cost, capacity, and efficiency enhancement with cross functional teams in GOPS and BU
• Deliver tooling and test equipment according to product requirements, with innovations in meeting manufacturing efficiency and customer quality

Prerequisites

• Minimum 5 years of experience working in a manufacturing or engineering environment with technical experience on manufacturing and production activities.
• Minimum Bachelor’s Degree in Mechanical, Electrical, Electronic, Materials or Manufacturing Engineering.
• Experience within the Semiconductor/Capital Equipment industry in Manufacturing, Quality or engineering roles in equipment assembly and test
• Knowledge on material fabrication processes, component installation, sub-assembly and final assembly integration, preferably for CVD/ALD/Epitaxy equipment
• Understanding on Bill of Material structure (Product structure, Generic vs. Customization, Options and Kits) and revision changes
• Prior experience in implementing DFM and Lean concepts through manufacturing engineering; Modular assemblies, Feeder lines, Off-line assemblies, flow line, automation solutions, data analytics, and digitization.
• Knowledge of new product introduction, PLC processes, Engineering Change workflows, and Change Control requirements
• Experience in working and interfacing with cross functional teams. Demonstrated ability to influence cross functional organization and drive changes.
• Experience in managing multiple projects using project management skills and tools
• Familiar with the following operational excellence tools but not limited to: Lean Manufacturing, FMEA, 8D, PDCA, DMAIC, 6-sigma, Cpk, GR&R and SPC.
• Experience with SAP and/or major ERP/MRP systems and processes at user level.

At ASM we are committed to supporting our people, enabling them to develop their talents and perform at their best. We actively promote an inclusive and diverse culture that fosters trust and transparency. Our people are our power, and we value the differences between everyone because it is what make us better as a team. By embracing a wide range of perspectives, we enable a culture of continuous exploration and adoption of new ideas. At every step, we know that it is our valued people who enable us to deliver excellent products and service to our clients – and to make a meaningful difference in society.

So join us on our journey and unleash the power of an open mind. Discover how you can be part of our exciting future and apply today! To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram and YouTube.

Location: Woodlands

Salary: $4000-$4800

US MNC

Have AWS & Bonus

Job Description

• Offer technical support and expertise advice to customers (both internal and external) on product selection, solutions and other applications knowledge.
• Do regular site visits as part of field learning experiences and also to help troubleshoot issues as necessary.
• Work with sales team to provide customers with product demonstrations and company presentations, technical solution and products offer.
• Work with global application team to maintain close coordination and cooperation, access to product related information and seek for technical support when necessary.
• Participate actively in knowledge exchange through global forums and case studies.
• Conduct necessary technical training to customers, distribution partners and internal team
• To support the sales team in spec-in activities with the best solution, as well as reviewing project technical/testing specifications
• Work with QC team on product defects/issues/technical aspects
• Other ad hoc duties assigned by the supervisor.

Professional Qualifications

• Bachelor’s degree/Diploma in Mechanical/Manufacturing and Engineering is preferred.
• Competent in Solidworks/Autocad.

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368