Job Requirements

· Lead Process Design Engineer for the Process Design of Storage Terminals, Process Units in Refineries and Chemical Plants which involves the Basic and Detail Design including the preparation of PFDs, P&IDs, System Description, Process Control Philosophy, Hydraulic Calculation, Heat Transfer Calculation, Heat & Material Balance, Relief System Calculations, Utility Consumption, Equipment data sheets & Instrument data sheets.

· Prepare Technical Proposals including preparation of PFDs, P&IDs, hydraulic calculations and system description.

· Design Calculations for Pumps, heating coils, Thermal Relief valves and Tank venting calculations.

· Analyze pressure relief design scenario and calculate the relief load and validate the results

· Prepare Process Data Sheets for Instruments, Equipments & Tanks.

· Review other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc.

· Participate in HAZOP and SIL study, Review HAZOP Report and prepare HAZOP & SIL Close-out reports.

· Participate in P&ID Design Review and Process Control Philosophy Review, and prepare review Close-out reports.

· Design of Fire Protection System as per NFPA for the Storage Terminal, which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Design of wastewater collection and disposal system for the Storage Terminal which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Prepare Surge Analysis report using Pipenet Transient Module.

· Development of automated excel spreadsheets for process calculations.

· Performing Simulation using Aspen HYSYS & Unisim

· Preparation of simulation report & HMB.

· Equipment Sizing and Preparation of Equipment Data sheets.

· Preparation of technical specification in line with the project requirements

· Performing Hydraulic calculation and preparation of Data sheets for control valves.

· Performing Relief load calculation and preparation of Data sheets for safety valves.

· Design of Flare system using Flarenet.

· Utility sizing and Preparation of Utility Consumption report.

· Preparation of Process Control Philosophy & Cause and Effect diagram.

· To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

· To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Chemical)

Experience

Preferably 10 years’ experiences

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word

3) Smart Plant P&ID

Code Knowledge

1) API 2000, API 520, API 521, API 526, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Job Description

• Lead and manage a team of Sub-contractors for all addition and alteration (A&A) work
• Plan, organize, co-ordinate and implement A&A work timely and ensure compliance to all authority and client's requirement
• Liaise with sub-contractor and vendor for quotations and purchase orders
• Evaluate project requirements and generate feasible proposals for work completion
• Liaise with client's appointed officer on all issues related to the A&A and project work
• Preparation and submission of shop drawings, point schedule, materials, write-ups, and other necessary items for approval
• Track and manage project progress and submit progress claims
• Lead, coordinate, and execute testing & commissioning works for A&A works with proper documentation
• Conduct site surveys, attend meetings on-site, evaluate installation progress on-site
• To arrange and provide servicing & maintenance works for active sites

Requirement

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• At least 1~3 years of working experience in construction or retrofit project in BMS/ACMV/Electrical/ELV
• Good knowledge of Building Services (BMS, ACMV or Electrical or ELV) and project management
• Proactive individual who can work independently
• Good interpersonal and Communication skills
• Able to multi-task and achieve deliverables on schedule
• Able to generate project reports via Word, Excel, Powerpoint

We regret only short listed candidate will be notified.

Job Description

Responsibilities

Operations Back Office Support (AR)

• Assist with AR department especially debt collection, invoicing
• Telephone customers to achieve payment
• Coordinate with Engineers, Licensing to check on invoicing
• Any other ad-hoc job being assigned

Requirements

· ‘O” Level

· Proficient in MS Office applications

· Good initiative and a good team player

· Good interpersonal skills

Working hours:

Mon-Friday 8.15 to 5.30pm

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

Job Description & Requirements

The engineer is to act as Electrical Commissioning Lead (entire Electrical Systems Lead), manage all Electrical system commissioning from preparation phase to execution phase.

Job Description

• During commissioning preparation phase, responsible to attend Supplier Kick Off meetings to roll out package related commissioning requirements, review of Supplier documents, review ITR assignment and provide inputs for commissioning schedule.
• Prepare and review system boundary, commissioning procedures and commissioning deliverables.
• Support Commissioning Manager and Commissioning Project Engineer in the preparation of required tools, utilities, first fills and others for the commissioning activities of Electrical systems.
• Electrical Commissioning Lead is responsible for successful and safe commissioning of their area / system following the commissioning strategy set by Commissioning Manager.
• Work closely with MC Coordinator, Commissioning Coordinator for timely completion of the ITRs, mechanical completion and commissioning completion.
• Supervise day-to-day electrical commissioning activities are complied with Company’s Standards and Procedures.
• Identify and integrate Safety, Quality requirements in the electrical commissioning activities to ensure safe operability and maintainability.
• Understands the Completions philosophy and Scope of Work by studying the applicable industry standards, Company standards, specifications and procedures.
• Manages electrical commissioning PTW, electrical commissioning engineers, assigned technicians, operations support, supplier support and CLASS witness to execute the approved commissioning procedure including performance standards verification successfully, sign off the test reports and support for the system dossiers completion until handover.
• Reports to Commissioning Manager and Commissioning Coordinator.
• Interacts with Engineers and internal stakeholders for the purpose of training, discussions, attending meetings and other project related requirements.
• Coordinates work requirement with commissioning assistant in order to prepare system boundary drawings and handover dossiers.

Requirements

• Educational Qualification: Bachelor in Engineering (Electrical)
• Relevant Experience: 7 years and above of relevant working experience in FPSO commissioning.

Job Responsibilities

• Provide 24 X 7 technical assistance via phone,
• Troubleshoot CPE issues, Mobile Broadband, Web/Mail Hosting/setup, co-location and other ISP related products and services
• Coordinate with other departments and handle internal escalations
• Attend to faults and escalate if necessary. Common faults are outages, server failure, router, switch etc.
• Manage monitoring systems (eg. bandwidth monitoring, link monitoring, DDOS notification etc)
• Provide after-hours technical assistance to Data Centre (eg. handle customer visits, reboot server, DDOS issues, etc)
• Coordinate with other departments for basic troubleshooting support
• Ensuring alert for major project is being follow up closely and ensure that relevant department is being updated of the progress
• Ability to adapt quickly to ever changing priorities and handle multiple tasks simultaneously

Job Requirements:

• Degree/Diploma or equivalent with NOC experience
• Minimum 2 years of experience in a support/service environment with a keen interest in Internet Technology
• Preferably with CCNA certification or other network certifications
• Customer oriented, motivated and driven to explore new ways of doing things
• Team worker with good interpersonal, communication and writing skills
• Able to work within constraints and meet service levels
• Willing to accept new challenges and responsibilities
• Highly motivated with initiative
• Willing to work on rotating shift, inclusive of weekends and public holidays
• Customer focused attitude with ability to explain technical information to non-technical people with compassion
• Outstanding communication skills in English, both written and verbal

Roles and Responsibilities:

• Diagnose and troubleshoot compressors received at the workshop, as preliminary stage before execution of the service.
• Service, overhaul and test all compressor technologies in the company's portfolio, from reciprocating to screw compressors.
• Effectively communicate verbally and in writing with co-workers and when necessary, with customers.
• Recommend preventive measures and provide prompt and effective resolution to technical problems
• Duly maintain proper record for each service job, such filling service, inspection and test reports
• Follow up work orders for each job, maintaining checklist and daily time sheets.
• Work effectively in coordination with other departments in order to ensure a smooth and timely supply of required parts to complete service activities.
• Guarantee proper maintenance of workshop tools and equipment
• Conduct safety assessments of the working environment and to proactively propose improvement to enhance the efficiency of the operations
• Provide technical training for customers and technicians in the team.
• commissioning or commissioning assistance services, inclusive of verification of electrical panel, refrigerant charge adjustment, data recording and analysis
• Troubleshoot and identify potential failures of system and analyze compressor failure through operation data.
• Lift and shift to support customer in removal and reinstallation of compressors on the refrigeration systems

Requirements:

• Minimum of 5 years HVAC field service experience
• Knowledge in air-conditioning, chiller or HVAC systems
• Electrical and basic electronic background is required, must be independently able to troubleshoot and identify electrical control and power line failures.
• Diploma/Degree in Mechanical / Electrical Engineering or equivalent
• Able to work under pressure and in a fast-paced environment.
• Good in planning, organizing, interpersonal skills and able to work independently.
• IT Savvy, proficient in MS Excel and MS Word
• Must have experience working inside vessel

Added Advantages:

• Brazing or welding certification
• Safety certifications
• Possess class 3 driving license

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Purpose and Scope

• Provide maintenance works and plant equipment to support the Operation

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure.
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Experience in Plant Fire System and knowledge in Electrical System such as MV Switch gear, LV MCC, UPS, Soft Starter, VSD.
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualifications & Experience

• Degree in Electrical Engineering
• Minimum 3 years’ experience in a Power Plant or Utilities plant environment

Key Skills, Competencies & Behaviours

• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

Responsibilities:

• Lead and manage ACMV system design, installation, and commissioning in construction projects.
• Coordinate procurement of ACMV equipment and materials.
• Coordinate and liaise with consultants, main contractors, and sub-contractors.
• Perform tests, inspections, and commissioning of ACMV systems for proper functionality and performance.
• Prepare reports, progress updates, and documentation related to ACMV works for project management and client review
• Supervise and check sub-contractors’ works according to design drawings, specifications, and regulations.
• Generate incident reports.
• Perform all other duties as assigned and required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 3 years of working experience in the construction or mechanical related fields is required for this position.
• Required skills: Microsoft Office, Microsoft Project, and AutoCAD.

Roles & Responsibilities

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Instrumentation & Control System Sow

We are looking for Senior Telecom Engineers to join our dedicated people in Project Engineering team at Singapore office. The role in our Project Engineering team is to deliver the Telecoms Systems to our customers in the Oil and Gas, and Renewable industries.

If you enjoy the technical challenges and variety of working in a fast moving project environment then this may be the next career move for you.

Key Responsibilities and Tasks

You will work in a Project team and your responsibilities and tasks will include:

• Front End Engineering Design
• Preparation of engineering drawings & documents
• Preparation of specifications for procurement of equipment.
• Develop detailed system design; with diagrams and schematics including integration of systems
• Selection of equipment
• Develop bulk material listings
• Provide input for preparation of selected reports, weight equipment list, function and fabrication / installation.
• Calculation & studies (RF, Network, PAGA, CCTV, etc.)
• Provide accurate and detailed project documents and drawings
• Interface with sub vendors to ensure they meet the project requirements.
• Configuration and testing
• Support to the Service team
• Support to the tender and sales team
• Coordination with other disciplines

Who we are looking for

You shall have a relevant professional background with a Degree in Telecommunication subject and project engineering experience in the energy sector (Oil & Gas, Renewable, etc.). You must have proficiency on a wide range of technologies including Data Network, Voice, Radios, PAGA, CCTV, Metocean, Acess Control, Radar, VSAT, Navigation, Microwave, etc.

As a team player, you shall be organized with good attention to detail and having a positive attitude with a proactive and practical approach to work. You need to have excellent analytical and problem solving skills with a good understanding of IT and software based solutions. Fluency in English is essential.

Interested?

Please send us your resume, stating your credentials and past job experience with your application. Please state your expected salary, required time for notification and reasons for leaving your present position, if available.

Salary will commensurate with the relevant experience.

We regret that only shortlisted candidates will be notified.

Purpose

To manage a team of technicians/junior staff in a specific engineering discipline (Instrumentation) to ensure timely implementation of projects and plant availability at all times.

Key Responsibilities Area

1. Carry out implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget and qualification of facilities in accordance with site to approved procedures.

2. Provides specialist advice to other departments and subordinates for trouble shooting / continuous improvements to processes / systems.

3. Maintain the site equipment and facility to high GMP standard meeting the regulatory expectations such that the site is always inspection ready.

4. Implementation and execute of the Product Contamination Cause and Elimination (PCCE) program.

5. Provide input to the project team of capital projects as well as develop and implement the maintenance plan for newly installed equipment.

6. Provide site inputs to the development of Global Engineering Standards (GES).

7. Monitor and enforce compliance measures (including safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.

8. Supervise, develop, and motivate junior staff to help realize their maximum potential so as to contribute towards achieving the objectives of the department.

9. Contribute to the development of the annual operating budget of the section to ensure achievement operational targets of section.

10. Implementation of the GSK Production System (GPS) for Engineering department

11. Responsible for planning and implementing plant maintenance, managing of engineering resources during plant turnaround and prompt resolution of breakdowns, including engaging external assistance.

12. To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.

13. Monitor and manage the defined utility system to ensure constant and reliable utility supply to the plant at all times so as to minimize disruption to the production process.

Skills, Knowledge & Experience

• Min degree in engineering
• Min 5 years of instrumentation experience in the process or pharmaceutical industry
• Experience in electrical, planning and scheduling
• Basic awareness of industrial standards
• Good understanding of local codes and requirements
• Familiar and understanding of GSK Global Engineering Standard (GES)
• Basic commercial knowledge & project management skills
• Effective communication & Operational Excellence skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why Us?

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organization where people can thrive. Getting ahead means preventing disease as well as treating it, and we aim to positively impact the health of 2.5 billion people by the end of 2030. ​

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.​

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

JR: 387550

Project: HDB (new)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in End February 2024/March 2024

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 5 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Responsibilities:

Client/Contractor Communication:

• Communicate effectively with clients to understand their requirements and expectations for projects.
• Provide technical advice and recommendations to clients on the most suitable solutions for their specific needs.
• Coordination between client, consultant, sub-contractor(vendors) and internal team
• Liaise and carry out evaluation and negotiate with suppliers and subcontractors

Project Management:

Reviews tender documents / requests for proposal to understand project details and requirements.

• Review engineering calculations, specifications, and drawings submitted by subcontractors/vendors/clients.
• Oversee projects from tender, contract award to completion, handling final accounts.
• Provides detailed and accurate quantity and component take-offs against the drawings as specified In the tender document.
• Sourcing materials and send quotation inquiries to the vendors and subcontractors, comparison of quotes, review of prices, to ensure comply to tender requirement.
• Study and identify discrepancies in tender/contract documents and raise queries for clarifications.
• Ensuring all expenses stay within the allocated budget.
• Compile all documents required for submission. Reviews and interprets engineering documentation such as drawings/specifications/scope of works to fully understand the project requirements for detailed and accurate estimating.
• Provide guidance and instructions to other workers or junior staff members.
• To provides timely clarifications for ongoing submission within the tender and request for proposal duration;
• Evaluating all products and processes and ensuring standardization of quality assurance measures.
• Communicates and negotiates competitive rates with Suppliers and Sub-contractors;
• Responsible for tender cost estimation and the preliminary project cost for tender bids and tender summary for management review.
• To prepare the project preliminary cost for the tenders.
• Other ad-hoc duties as assigned.

Requirements:

• Degree/Bachelors and above in Civil Engineering or Equivalent.
• Proficient in AutoCAD, Bill of Quantities, Preparation of Tender Documents, Job Site Permit Application and Microsoft Software.
• Familiar with the latest building/construction design codes, specifications and requirements.
• Min. 2 years’ experience in both construction and facility management.
• Able to communicate with clients and approving agencies for purposes of obtaining design information, presenting design intent and options and expediting approvals.
• Able to liaise and coordinates with other design discipline/departments as well as managing sub consultants in preparation of drawing and reports for submission.
• Able to supervise the team and carry out independent review of submission documents.
• Able to lead a team of workers for projects.
• Singapore Class 3 Driving License.
• Proficient in English.

Those with qualifications/experience as quantity surveyor may apply.

Wellbuilt Construction Pte Ltd

Site Engineer

Permanent, Full Time, Island Wide

Executive

2 years - 5 years exp

Building and Construction

$3000 to $5,000

Monthly

Roles & Responsibilities

We are looking for someone who has Building and Construction, Steel and Structural, and Safety Knowledge, or the construction site knowledge professional firm.

Job Descriptions:

· Monitor and Handle quality, Budget, Quality, Product Knowledge, and arrangement for site delivery and site matters.

· Handle and Instructions employees on machine operation, safety, and company policies.

· Inspect Inputs/outputs to check for QC/materials., PO from established quality standards.

· Coordinator workflow, processes, and machineries.

· Research or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.

· Monitor team and work procedures to meet production schedules

· Provide direction for project tasks and hold all team members accountable for safety, quality, and production

· Conduct daily briefings with workers to review site goals and performance feedback

Qualifications and Requirements:

· Minimum of 2-5 years experience as a site engineer in construction and Steel of Structural, White Aluminum, or having related safety certificate, etc.

· In-depth knowledge of extrusion procedures, equipment, and WSH guidelines.

· Able to read and understand the AutoCAD or 3D drawings.

· Problem-solving abilities.

· Responsivity and Mature

· Trueful and Honesty

· Observant and alias the project, dateline, and follow instructions by the production Supervisors, and follow closely and with the administration work.

• Lead Food Safety risk assessment and quality records (QRs) for escalation on lines as per Global GMP lifecycle policy.
• Provides support and inputs to update Food Safety Policy and site HACCP.
• Provide support to the Manufacturing organization to facilitate the efficient operations within the production area.
• To optimize existing processes and to ensure that production goals are met. Ensures systems and processes to maintain GMP at workplace.
• Collaborate with Operations sub-functions in tracking critical production and cleaning parameters to track and collate responses for consumers/medical/affiliates escalations.
• Monitors performance of equipment, machines and tools and corrects equipment problems or process parameters that can produce non-conforming products.

Major Responsibilities:

• Responsible to Manage and focus directly on GMP food safety engineering/food security and validation, in preparation for the commercial production of regulated products.
• Lead projects of facilities and equipment and optimization of existing manufacturing processes to deliver products with the production requirements consistent with Gold Standard Policies.
• Responsible to perform quality events investigation and coming up with CAPA action. Ensuring the effectiveness of CAPA action.
• Responsible to Motivate, develop and train employees for the facility and from third party as part of food safety program.
• Lead incident reviews to investigate and correct microbiological non-conformities and provide recommendation regarding process design, product disposition and continuous improvement.
• Optimize the documentation for quality systems, cleaning and validation, SOPs, HACCP plans, and food safety policy and protocols.
• Ensures plant Food Safety documentation is maintained in an audit-ready state, meeting all statutory, regulatory requirements & customer expectations.
• Ensures the effective use of materials, equipment, and personnel in producing quality products at an effective operating cost.
• Responsible for compliance with applicable Corporate and Divisional Policies and Procedures.
• Prepares reports, publishes, and makes presentations to communicate findings.
• Partner with Engineering on the installation, modification, upgrade and maintenance of manufacturing equipment.
• Implement, document, and maintain controlled, repeatable production processes.
• Development of qualification and validation protocols.
• Participate in and/or lead qualification and validation activities.
• Interface with other departments and suppliers to address root causes.
• Understands the business needs of the company and has knowledge of the customer needs of our business.
• Cultivates internal and external network of resources to complete tasks.
• Any other duties as assigned by supervisor.

Skills/ Experience Requirements:

• 1 to 2 years of related experience.
• Knowledge in SAP system/POMS/MES.
• Knowledge about food microbiology, pathogens and food safety.
• Able to make fast decision and react efficiently to situation.
• Understands engineering principles, theories concepts, practices and techniques

Education:

• Bachelor’s degree in Process Engineering/ Mechanical/ Electrical/ Food Science
• Biotechnology/Microbiology or in related discipline or with a minimum 1-2 years of related experience.

• Work closely with the data team and cross-functional departments to grasp business needs and translate them into data solutions.
• Develop, maintain, and optimize machine learning models and algorithms to support agricultural decisions and operations.
• Conduct thorough data cleaning, preprocessing, and feature engineering to ensure data quality and readiness for analysis.
• Design and implement efficient data pipelines and ETL (Extract, Transform, Load) processes to streamline data flow and accessibility.
• Create impactful visualizations and reports, providing actionable insights to stakeholders and contributing to informed decision-making.
• Engage in the setup and maintenance of hardware and networking infrastructure to support data engineering tasks.

Requirements

• Bachelor’s degree in Computer Science, Statistics, Mathematics, Engineering, or a relevant technical field.
• Solid grasp of machine learning concepts and experience in developing predictive models.
• Proficiency in programming languages such as Python, with strong skills in data manipulation libraries like Pandas and NumPy.
• Experience with machine learning frameworks (e.g., Scikit-Learn, TensorFlow, PyTorch) and a good understanding of their application in solving real-world problems.
• Knowledge of SQL and experience with database systems for efficient data retrieval and manipulation.
• Strong problem-solving skills, attention to detail, and the ability to work collaboratively in a dynamic, interdisciplinary environment.

Primary Function:

• Strategize on maintenance, work instruction and methods to create plant equipment preventive maintenance procedures.
• Support in the planning of routine maintenance of production equipment.
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability.
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle.
• Oversee and control maintenance costs. Manage budget for equipment upgrades and replacements.
• Train and mentor junior engineers and technicians in equipment operating concepts and maintenance techniques.
• Function as project development member to install or upgrade equipment. Schedule and obtain project material and manpower.
• Support Plant EHS and quality initiatives and targets.
• Responsible for developing budgets and long-range plans based on company growth and future maintenance needs.

Responsibilities:

• Responsible for the maintenance (corrective, preventive, predictive) of plant equipment, wet process and dryer, dry blending and packaging, Clean In Place systems, warehouse in comply with the Site Safety and GMP procedures to ensure good uptime and good MTBF.
• Responsible for support the equipment qualification and validation, such as walkdown, punch list commissioning, IQ/ OQ/ PQ for any new project.
• Responsible for execution of work order and record job performed via MAXIMO system.
• Responsible for writing Job Aids and Maintenance SOP writing, CCA and ER investigation.
• Manage and lead contractor, vendors and service providers to perform maintenance or project works.
• Responsible for Maintenance budge for area of responsibilities
• Lead and Take part in continuous improvement efforts/ projects.
• May act as delegate to the Engineering Manager when required.
• Any other duties as assigned by supervisor.

Requirements:

• Bachelor of Engineering in Mechanical, Mechatronic, or related discipline
• Min 0 - 2 years of relevant experience, preferably in manufacturing plant
• Prior experience with packaging processes ideal
• Good communication and interpersonal skills
• Good team player and able to multi-tasks
• Able to react effectively to dynamic Manufacturing environment and able to work independently

*Kindly note this position is based in Tuas.

Summary:

The Sales Engineer will be responsible for the assigned industry segments and customer accounts. The role will focus on understanding the customers’ requirements, and collaborate with internal team members and external partners to devise strategy and solution proposals to meet customers’ requirements.

This role will also require the candidate to grow the pipeline and sales in the assigned industry segments and customer accounts, maximizing the potential and ensuring coverage to drive sales results and customers’ satisfaction. The candidate has to be both commercially and technically capable to follow through effective bid proposals and conducting of technical knowledge exchange presentations (when deem necessary).

This role requires the candidate to work closely with Solution team if the scope is very extensive in order to come out for cost-effective turnkey solution. The selected candidate will undergo necessary product training or courses to familiarise with the products and equip with DC knowledge based on on-job or on-site training. After the training, the candidate is expected to work out costing and quotations independently for product sales, maintenance and manpower for Facility Management.

Responsibilities:

• Mainly focus on sales strategy planning and business development to meet or exceed given Annual Sales target.
• Support technical queries from external (e.g. end users, consultants, and partners).
• Work closely with Solution team in articulating technology and product positioning to both business and technical users in the form of presentation or bid proposal and clarifications.
• Work with Solution team in solution design and produce guide specifications support to consultants, integrators, and customers.
• Respond to functional and technical elements of RFIs/ RFPs including conducting of cost and solution analysis to ensure competitiveness of bid response.
• Develop opportunities from assigned industries and customer segments.
• Act as single point of contact to the assigned customers account and manage the customers’ requirements and feedbacks to ensure satisfactory level.
• Coordinate with solution team and project team to deliver project in timely, satisfactorily and quality manner and ensuring project delivery is delivered in compliance with contractual and regulatory requirements.
• Resolve issues in a manner that is consistent with the company mission, values, and project objectives.
• Identify customer's needs and sales opportunities from the leads received, and to help future growth through value-added engineering.
• Develop and maintain close relationship with customers.
• Bi-weekly update of Sales CRM, sales gap and forecast report.

Requirements:

• Degree/Diploma in Mechanical or Electrical Engineering or equivalent.
• Minimum 1 year experience in Data Centre / Engineering & Building Services Industry is preferred.
• Fresh graduate is welcome.
• The drive and energy to manage multiple accounts while looking for new opportunities.
• Self-driven with initiative, fast learner.
• Excellent verbal and written communication skills.
• Ability to understand client needs and handle the negotiation process.
• Strong time management skills.
• Computer skills, especially Salesforce, Excel.

Highlights:

• Salary Package: S$3000 to S$4000 (per month)
• Working Hour: 9am to 6pm
• Working Day: 5 working days
• Office Location: Potong Pasir mrt station (Nearest MRT)

Who We Are

Global Supply Chain (PTS) connects across the organization to ensure a reliable supply of our innovative medicines to patients. The external landscape continues to evolve and Roche's product portfolio has never been more dynamic so we are evolving our operating model/ the way we work to address these challenges. This includes building new capabilities, smarter and more sustainable use of our internal & external networks and resources and leveraging digital and new technologies. Come and join us to transform the customer and patient experience!

Role Purpose

The Customer Insights Lead is responsible for ensuring that the voice of the customer is factored into Supply Chain business decisions and strategies. The Customer Insights team is responsible for providing unbiased, objective, expert strategic insights by analyzing diverse data, to optimize supply chain design and enhance operations for more efficient and sustainable service to the patient. The team works in collaboration with the cross-functional parts of the organization (PT, PI, GPS, Diagnostics, etc…) to develop customer-centric solutions to bring value to the healthcare ecosystem and ultimately better outcomes for patients.

The Customer Insight lead also plays a crucial role as a strategic partner to the Regional SC teams to enable the sensing of the customers in the markets and support the transformation of insights into actionable business recommendations.

Your responsibilities:

• Developing and implementing a comprehensive customer insights strategy aligned with organizational goals
• Developing customer insights capabilities to enable customer centricity and support the change management process & deployment at scale led by SC business partners
• Understanding needs of future pipeline products, using this to coordinate efforts locally and regionally to meet these needs and launch coordination activities of new products within the market
• Defining key indicators to measure the effectiveness of customer insights initiatives
• Leading the analysis of customer data, leveraging statistical methods, data analytics tools, and other relevant techniques
• Interpreting complex data sets to identify trends, patterns, and actionable insights
• Collaborating with cross-functional teams, including global and regional SC teams, commercial, product development, quality and customer service, to integrate customer insights into decision-making processes

Your profile:

• You have a Bachelor's degree (preferably in science, engineering, or a business discipline); an MBA, PhD or other graduate- or post-graduate-level degree is an asset with 6 - 8 years' strategic consulting or related experience, including an emphasis on strategic analytics and insights, knowledge of strategic market research, competitive intelligence and business forecasting
• Your global bio/pharmaceutical experience is strongly preferred
• You have understanding and experience of business analysis techniques, processes and tools (incl. Visual business intelligence tools, SQL, etc…)
• You have a deep understanding of the external environment (healthcare setup, regulation, providers) and customer / patient segments and needs with strong business acumen
• You are outcome-based, solution-oriented, and show an enterprise-thinking mindset as well as strong analytical capabilities and skills and the ability to derive meaning from such analyses
• Effective interpersonal skills for stakeholder engagement, cross-teams collaborations and cross-organization communications, with a fluent English

Mindset

We're looking for people with a growth mindset to bring curiosity and new possibilities to the way the end to end supply chain can meet the needs of patients. In line with the Roche Operating Principles we put patients first always and look at how we can redesign our supply chain solutions to serve them in a way that makes an impact now but is also sustainable for the future.

Responsibilities:

• Prepare timely and accurate progress reports for ongoing projects, highlighting key milestones, achievements, and challenges.
• Assist in the preparation of comprehensive work done reports, detailing the completed tasks, materials used, and any deviations from the initial plan.
• Support the engineering team in maintaining internal quality management documents, ensuring that project processes adhere to standards.
• Update and maintain monthly reports, including project status, and resource allocation, to provide a clear overview of project performance.
• Undertake any ad-hoc duties as assigned

Requirements:

• Minimum of a Bachelor's degree in Civil Engineering or a related field. Candidate that does not fulfill this minimum requirement but with relevant experience would be considered.
• Meticulous and detail-oriented
• Strong analytical capabilities to interpret project data
• Excellent organizational skills
• Effective communication skills
• MS Office suite, AutoCAD, or project management software.
• Office based position, training will be provided by Senior Report Engineer.

You may send your resume / CV to email address directly: [email protected]

Roles & Responsibilities

•Inspection of project sites

•Coordinate, manage, and supervise all the instrument installation and monitoring works.

•Liaise and coordinate with contractor for installation and monitoring issues

•Attending site progress meetings, preparation of minutes and coordination with clients.

•Process and interpret monitoring readings

•Coordinate with construction team to minimise obstruction and damage of the monitoring instruments

•Supervise and quality control in instrumentation works

•Any other duties as assigned by Manager.

Requirements

•Relevant education background in Civil Engineering / Geotechnical / Geology

•Min 3 years’ experience in instrumentation and monitoring works

•Experience in LTA projects

•Senior position will be considered with relevant experience.

You may send your resume / CV to email address directly: [email protected]

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities

• Perform Commissioning and Qualification/Validation for Project in compliance with GMP regulations, specification requirements.
• Protocol generation or review for the assigned areas and summary reports for initial and subsequent re qualification programs related to E/F/U systems.
• Review vendor or construction turnover document
• Participate/lead system walkdowns to assure compliance with design.
• Support or direct execution of full Commissioning and Qualifying project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with cross functional teams.
• Support or lead summary report writing
• Support the review and revision of design document
• Support the handover of assigned system
• Support the management of project schedule.
• Compliant to quality and safety requirements.
• 
  

Qualifications:

• Bachelor of Science, Engineering or related scientific degree
• Experience in Pharma Industry is preferred
• Min. 3 years of experience in Commissioning and Qualifying project is required
• Knowledge of cGMP regulations and industry standards such as ISPE GAMP, and FDA guidance documents
• Ability to work in a fast-paced environment.
• Time management skill and attention to detail
• Strong interpersonal and communication skills

At No deviation, we strive to deliver our best every day. We apply our core values of empathy, integrity, and transparency to every activity, including engagement with our candidates. We are an equal opportunity employer, value diversity, and promote inclusivity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

EA Licence: 19C9587

Job Description:

• Be Involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure worksare constructed as per project & safety requirement
• Supervise site works
• Liase with clients on site works / project
• Other adhoc duties as assigned

Requirement:

• Degree in Civil Engineering / relevant
• Able to lead and work independently
• MS OFFICE, AutoCAD
• Good Communication Skills

You may send your resume / CV to email address directly: [email protected]

• Marine Engineering
• Basic $3000 - $4000
• 5 days (8.30am – 6.00pm)
• Location: Penjuru Lane
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.
• Hands on in setting up of test lab to enable development and testing.
• Perform PLC software and algorithm development for electrical propulsion solutions.
• Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.
• Participate and support commissioning of vessels with similar configurations.
• Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.

Requirements

• Degree in Engineering in relevant field.
• Knowledge in power electronics, motor drives, marine propulsion systems is a plus.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other adhoc duties as assigned

Requirements:

• Minimum diploma or above in Civil Engineering/Geology or relevant vocational certificate
• Able to speak and written English and Chinese in order to communicate effectively with Chinese speaking client and associate.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, Self-Driven and willing to take responsibility for assigned tasks as project engineer / manager
• Preferably Engineer specialized in Engineering/Civil/Construction/Structural or equivalent

You may send your resume / CV to email address directly: [email protected]