About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

About this role

Act as delegated technical authority for Engineering and part of Shift Cross Functional Team to review and resolve promptly to ensure operational flow on technical issues/problems/arisings to meet operation requirements or safety, cost, delivery rate and leadtime (SQCD).

Job Description

• HSE – Practice full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm programme.
• Product Safety – Understand product safety risks and work on mitigation to meet the required safety levels supporting requirements of the Company’s Safety Management System.
• Quality – Perform investigation on Engines/Modules and place part level (including component repair) rejected from service. Produce Technical Summary on strip findings and work performed on Engines and Modules including investigation. Support findings review & provide technical disposition to problems.
• Lean/Improvement – Identify opportunities for new or improved manufacturing processes to meet current or future requirements. Identify, capture and share best practice; capture and utilize lessons learned working closely with Operation & Cell Manufacturing Engineers.
• Lead – Act as Technical Authority for Engineering during the shift using standards set to make quick/prompt technical decisions in relation to the area of accountability.
• Delivery – Manage related technical variances or non-conformances during operational processes (ERRN review & TV request management including PAF).
• Delivery – Review and resolve promptly to ensure operational flow on technical issues/problems/arisings to meet operation requirements.
• Delivery – Workscope creep management control that deviates from standard including Work Instructions clarification.
• Delivery – Support FAIR, MSA and time study activities in shift.
• Test – SAESL Technical Focal for all Test related arising from Customer and the engine OEM as well as with the testbed OEM. Create engine test instructions and support On-Off site Technical Support for Engine test troubleshooting. Support Test Result Analysis and acceptance and if required address Technical Variance arisings.
• Test - Test performance review and drive proactive improvement initiative to reduce RTS/RTT. Support readiness of testbeds in fulfilling new requirements / new product types as well as continued airworthiness and readiness of testbed facilities, equipment readiness in cooperation with the Test Operation Team and the Testbed OEM. Special Test Site Support.

Requirements

• Degree in Mechanical/Aerospace Engineering discipline or equivalent (Candidates with relevant Diploma and work experience will be considered)
• A good team player with good communication skills
• Possess good analytical and technical problem-solving skills
• Required to work on rotating shift work
• Willing to work in Changi

Please apply via our website (www.saesl.com.sg).

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Job Description

• Support development of new methods, capabilities and technology to improve engine overhaul processes
• Identify opportunities for process improvements through new methods, capability development or acquisition.
• Capture operations needs and match capabilities and technology acquisition or development.
• Conduct feasibility and initial savings study to justify development/acquisition
• Validate developed or acquired methods, capabilities and technologies to ensure initial requirements are met and savings expectations are achieved
• Manage vendors or research groups to ensure capability/technology developments meet current or future requirements
• Plan and manage activities, communicate status to relevant internal stakeholders

Requirements

• Degree in Mechatronics/Manufacturing/Mechanical Engineering (Candidates possessing both Diploma certification and relevant experience will be considered)
• Ideally 5 years’ experience in similar job role. Applicants with less experience (including fresh graduates) but have relevant skills and experience may be considered
• Experience with industry 4.0 technology integration is an advantage
• Good communication, analytical, engineering and project management skills
• Good technical problem-solving skills

Function Description

This position serves both Business Development and Service & Support. The position requires detailed knowledge of flight simulation equipment, maintenance, and operation, as well as Collins image generators and display systems. Experience within the Asia-Pacific region training centers, and training device manufacturers is also required. This position works as part of the business development team to identify and follow market opportunities, clarify customer requirements, organize proposal submissions, and conduct contract negotiations. Detailed process knowledge of Collins service and support, and business development workflows and systems is desired.

Performs duties related to overall customer service including post-sales support. May support sales team by notifying other divisions of customer concerns and trends. Responsible for maintaining quality and consistency of service by documenting and identifying trends in customer service needs. Performs on-site services for Aftermarket clients, installs new equipment and services, maintains / services and upgrades existing equipment. Provides instruction and education regarding products or equipment usage to customers and internal employees. Designs and manages product training for customers and staff.

Discipline Description
Coordinates with Customer Service representatives to identify customer training and support needs. Resolves issues surrounding installation, usage, upgrade and training on products. Provides on-site support as needed. May resolve technical problems in a call center/help desk environment or through customer escalation. Completes proper documentation of issues.

Organization Level Description
• Implements functional strategy.
• Establishes operational plans for work area.
• Recognized master within discipline, having deep knowledge of theory and organizational practices within a specific discipline.
• Problems faced are typically complex.
• Develops and implements new products, processes, standards or operational plans that will have impact on the achievement of functional results.
• Significantly improves on existing processes and practices.

Typically requires a University Degree or equivalent experience and minimum 10 years of prior relevant experience or, an
Advanced Degree in a related field and minimum 7 years experience.

Familiarization and experience with regulatory authorities is required.

Purpose
Senior Product and Technical Service professional with significant experience. Implements customer support strategy. Works with leadership and Customer Service representatives to develop and execute effective support programs in alignment with projected changes in production processes, equipment upgrades, and/or other product strategy.
Responsibility Statements Subject matter expert for multiple products and services.
Operational lead for complex customer technical matters. Work with Customer Service to review effectiveness of technical support activities and identify customer training and support
needs. Responsible for improvements to product and technical service programs and offerings in alignment with production processes, product changes, and other factors. Direct implementation of product and technical services.

Essential Responsibilities:

• Perform audits on Repair Source Substantiation (RSS) packages to verify repair characteristic accountability
• Review RSS audit results to identify trends and coordinate continuous improvement plans to improve NPI quality and first time yield.
• Develop quality system procedures for NPI process to ensure accuracy, compliance and consistency of NPIs delivered by Engineering team.
• Track and monitor post introduction NPIs for quality issues and drive Engineering/Shop for follow up improvements.
• Act as a focal point for all NPI-related queries and clarifications about Quality/regulatory requirements.
• Support conduct of shop internal audit plan as necessary.
• Drive and promote Quality culture and participate in EHS and other shop initiatives as necessary.

Qualifications/Requirements:

• Bachelor’s degree in Engineering from an accredited university or college (or equivalent)
• Minimum of 2 years relevant aerospace experience in repair/manufacturing or a quality assurance role
• Knowledge of general aviation legislation and quality systems (ISO9001/AS9100)
• Good command of written and spoken English
• Basic knowledge of PC software (Microsoft Office)

Desired Characteristics:

• Knowledge of repair/manufacturing fundamentals
• Holds a recognized Lead Auditor or Internal Auditor certification
• Knowledge of Six Sigma quality concepts and tools.
• Knowledge of manufacturing special processes (heat treat, welding, shot peening, coating, chemical processes, non-conventional machining)
• Knowledge of RCCA/HF techniques
• Good initiative and analytical skills
• Six Sigma Green Belt certified.
• Strong attention to detail and accuracy
• Ability to communicate at all levels of the organization
• Demonstrated oral and written communication skills
• Strong interpersonal and leadership skills
• Humble: respectful, receptive, agile, eager to learn​
• Transparent: shares critical information, speaks with candor, contributes constructively​
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative​
• Problem solver: analytica-minded, challenges existing processes, critical thinker

We are a leading construction company specializing in road signage and related products in Singapore. We are currently seeking a highly skilled and experienced RTO to join our dynamic team.

Responsibilities:

• Monitor contractors' daily activity, site progress, schedule and safety on site
• Carry out administrative works and other duties as required by QP/Superintending Officer/Consultant/Employer
• Review and check all the drawings, specifications, and to ensure that works are carried out in accordance with the approved plans/drawings.
• Highlight discrepancies, feedback site progress and non-conformances/irregularities to QP/Consultants/Employer.
• Assist in reviewing of contractor's method statements and working procedures and assure contractor followed on site.
• Prepare lists of defects, monitor the progress of rectification works and ensure all the defects are satisfactorily rectified.
• To ensure all the construction works have complied statutory requirements

Requirements:

• Candidate must possess at least a Diploma/Degree in Civil Engineering.
• Must be registered as Resident Technical Officer (RTO) with BCA/IES/ACES.
• At least 1 Year of working experience in the related field is required for this position.
• Required Skill(s): Microsoft Office, Autocad
• Candidate with civil/infrastructure experience will be considered earlier.
• Must be a team player with strong leadership, communication, and supervision skills

This is a 1 year contract position, renewable or convertible to permanent.

Job Responsibilities

• Manage the full cycle in-house recruitment process, including job description creation, job posting/advertising, sourcing, screening, interviewing, arranging for interviews, selection, offer preparation and onboarding.
• Source candidates through various portals, social media, creative recruitment channels, and the internal referral program.
• Participate in employment branding activities with the HR team, conduct jobs fairs, campus recruitment, internships and traineeship programmes.
• Develop offers in line with approved guidelines and negotiate offers with candidates.
• Prepare letter of employment and onboarding checklist for new hires.
• Responsible for web updating, recruitment status reporting(s) and job advertising.
• Accurately track and reports on the recruitment, onboarding and confirmation process based on agreed metrics, using MS Excel and relevant HRIS module.
• Assist Recruitment team in developing a strong network of people and processes to support a strong pipeline of qualified candidates to quick turnaround time.
• Assist recruitment team to ensure new hires are well-organized, onboarded and have a meaningful probation experience by collaborating with line managers, IT, finance and HR teams.
• Assist recruitment team in application of airport pass, term pass and airline house clearance.
• Perform other HR and administrative task as per assigned by your superiors.
• The above job duties are scoped in general and is not limited to the above.

Requirements

• Diploma / Degree with a qualification in HR Management or equivalent.
• Minimum 2 years of working experience in a high volume, fast-paced, blue-collared recruitment environment (external and internal recruiters are welcomed).
• Experience in organizing jobs fairs, career fairs, campus fairs and virtual job fairs.
• Experience in generating manpower and recruitment status report(s).
• Familiar with online job posting and advertising channels.
• Experience in using integrated applicant tracking system (ATS) or manual tracking systems.
• Experience in work pass application, e-issuance and renewal of work pass.
• Good knowledge of the Singapore Employment Act and other relevant legislations.
• Able to work in a fast-paced environment with constant changes.
• Excellent team player, good interpersonal and communication skills with problem-solving ability.
• Ability to multi-task and work within tight deadlines.
• Proficient in Excel, Word, and PowerPoint.
• Meticulous and pay attention to details.

Responsibilities:

> Coordinate with System Integrator to carry out data acquistion

from varies machine

> Incorporate suitable UPCuA to enable machine data from varies

machine can be converted to data able to process by Genesis 64

> Work with Engineer top capture Process and Production data

Requirements:

> Degree in any discipline or experience with networking/data

analyst in a manufacturing environment

> Good knowledge of digital signal processing techniques

> Good knowledge of SQL, Excel VBA and other programming

languages

> Experience with MES, shopfloor automation and industry

4.0 is a plus

> Strong analytical and problem-solving skill

> A teamwork player with good communication skills and able

to work independently

About SAESL
A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.
• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL
• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities
• Update the Maintenance Organization Exposition manuals, and associate documents.
• Actively drive the Safety Management System and manage the Hazard Identification & Risk Assessment system
• Conduct internal and vendor audits (SMS, SABRe, Part 145 regulations, ISO, Nadcap) to improve compliance
• Actively support external audits (SMS, SABRe, Regulatory Authorities, Customers, ISO, Nadcap)
• Monitor and analyze audit/investigation/voluntary reporting data and identify issues/opportunities for improvement
• Review / support vendor & customer quality questionnaire
• Develop and conduct regulation trainings
• Manage staff authorisation system by reviewing the qualifications and conduct competency interviews for certifying staff & internal stamp holders
• Actively drive initiatives like Narrate & Demonstrate (N&D), Behavior Based Safety (BBS), Foreign Object Damage (FOD),
• Drive the SAESL Operating System and SAESL Enhanced Work Streams (SEWS) to inculcate strong safety culture
• Take on ad-hoc projects / assignments to promote safety culture


Requirements
• Diploma / Degree in Mechanical / Aerospace Engineering
• Good knowledge on regulatory Part 145 requirements, ISO9000 and Nadcap
• Knowledge on data analysis and its tools (Minitab, Power BI etc) will be added advantage
• Qualified Lead Auditor and have experience in conducting aviation safety and regulation audits
• Min 3 years of experience in managing the Quality Management System and Safety Management System

Apply Here --> https://saesl.applyourjobs.com/

About SAESL
A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.
• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL
• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities
• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize adaptive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for CAM and non-contact measurement related repair processes.
• Lead and own CAM and non-contact measurement activities
• Any other duties as assigned by supervisor


Requirements
• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on digital manufacturing and conventional machining
• Experience in operating non-contact measurement equipment and Siemens NX multi-axis manufacturing module
• Understanding of common component repair processes (welding, heat treatment, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

Apply Here --> https://saesl.applyourjobs.com/

About SAESL
A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.
• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL
• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities
• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize additive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for laser-related processes.
• Lead and own laser blown powder deposition activities
• Any other duties as assigned by supervisor



Requirements
• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on laser cladding (solid state lasers and blown powder laser) and metallurgical characterization
• Understanding of common component repair processes (welding, heat treatment, machining, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Experience in beam characterization using commerically available equipment
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

Apply Here --> https://saesl.applyourjobs.com/

Essential Responsibilities:

• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Customer Disruptions and improve customer satisfaction.
• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Workmanship/ WIP Losses, Rework and Turnbacks, and improve FTY, delivery performance, and COQ.
• Partner and engage with Operations/Engineering teams to facilitate and drive avoidance of repair-induced Departures.
• Track and monitor quality metrics (Yield, Losses, Escapes), and perform trend analysis to identify systemic improvement opportunities.
• Drive engagement & training of inspectors and certifying staff to ensure disposition & inspection
• Drive engagement and participation in Lean and quality improvement across the site.
• Drive and promote Quality culture and participate in EHS and other shop initiatives as necessary.
• Act as focal point for all quality matters and clarifications for the business unit.
• Support internal audits and perform CAR verifications.
• Support, review and approval of New Product Introduction (NPI) and Process Change Notice (PCN) initiatives.

Qualifications / Requirements:

• Bachelor’s degree in Engineering from an accredited university or college (or equivalent)
• Minimum of 2 years relevant aerospace experience in repair/manufacturing or a quality assurance role.
• Good command of written and spoken English
• Basic proficiency with of PC tools and software (e.g. Microsoft Office)

Desired Characteristics:

• Knowledge of manufacturing processes (heat treat, welding, shot peening, coating, chemical processes, non-conventional machining)
• Demonstrated work experience in reading and interpreting blueprints or engineering specifications;
• Knowledge of repair/manufacturing fundamentals
• Holds a recognized Lead Auditor or Internal Auditor certification
• Knowledge of Lean and Six Sigma quality concepts and tools.
• Knowledge of RCCA/HF techniques
• Knowledge of Lean concepts and tools.
• Knowledge of general aviation legislation and quality systems (ISO9001/AS9100)
• Good initiative and analytical skills
• Strong attention to detail and accuracy
• Ability to communicate at all levels of the organization
• Demonstrated oral and written communication skills
• Strong interpersonal and leadership skills
• Humble: respectful, receptive, agile, eager to learn​
• Transparent: shares critical information, speaks with candor, contributes constructively​
• Focused: quick learner, strategically prioritizes work, committed ​
• Leadership ability: strong communicator, decision-maker, collaborative​
• Problem solver: analytical-minded, challenges existing processes, critical thinker

We are a leading construction company specializing in road signage and related products in Singapore. We are currently seeking a highly skilled and experienced Project Engineer to join our dynamic team. The successful candidate will play a crucial role in ensuring the smooth execution of road signage projects while adhering to the requirements set by the Building and Construction Authority (BCA) and Land Transport Authority (LTA).

Responsibilities:

• Working out of estimates for the proposed work and submit within specific timeframe;
• Setting up traffic control / division plan for the work;
• Submit the detailed calculation and plans;
• Measuring and preparing job measurement sheets for payment of completed Works;
• Attending monthly progress payment, operation meeting and other meetings required at office / site;
• Ensuring all the plant and equipment are in good working condition and the temporary signing arrangement at site is in accordance with the Code of Practice for Traffic Control at Work Zone (Latest Edition) before the commencement of Works:
• Planning and ensuring smooth operation of the work;
• Ensuring works carried out is according to the Contract Specifications:
• Submitting weekly progress reports on Planned Jobs, Provisional Works / Provisional Quantities; and
• Others as instructed by the superior(s).

Requirements:

• have at least three (3) years relevant experience in road and road structure construction;
• have a Degree in Civil Engineering recognised by the Professional Engineers (PE) Board or qualifications acceptable by the Commissioner of Building Control for registration as Resident Engineer.
• Proficiency in AutoCAD and/or other relevant software applications.
• Strong project management skills, with the ability to prioritize tasks and meet deadlines.
• Excellent communication and interpersonal skills.Ability to work well in a team environment.

Tasks

• Design and implement complex and customized EMC/RF Test Systems
• Verify and approve system configuration and design
• Install and commission test systems on site in customer's laboratories
• Provide operational and maintenance training to customers
• Develop and maintain training materials and system documentation
• Drive trial measurements and proof-of-concept studies and testing on new test solutions
• Provide technical support to customers

Qualifications

• Holds a diploma or degree in Electronics Engineering (RF / Wireless / Microwave)
• Possess knowledge and prior work experience in EMC Test System, EMC standards, and RF test and measurements
• Results orientated approach to work
• Good communication and presentation skills
• Able to travel independently and on demand (mainly to Asia Pacific region)

The Role: Assistant / BOM Engineer

Responsibilities

• Responsible for RFQ costing preparation:
• Evaluate BOM and Drawing Package from customer.
• Prepare BOM and manage RFQ with costing team
• Compile cost
• Responsible for BOM completeness, costing and uploading to SAP.

Requirements

• Min Diploma in Mechanical / Mechatronics Engineering or its equivalent.
• 3 to 5 years of relevant experience in assembly / automation manufacturing environment.
• Possess MS Office skills and proficient with SAP
• Understanding of complex Bill of Materials (thousand liners)
• Understanding of mechanical drawings.
• Strong leadership with good communication skills
  
  Candidates who did not meet the above requirements may be considered for the Assistant Engineer role.

Other information:

• Working Hours : 8.15am to 5.30pm (Mon-Fri)
• Location : Changi North
• Company Bus : Pick up at Ang Mo Kio, Yishun, Hougang, Punggol, Pasir Ris, Bedok, Tampines MRT/Interchanges

Interested candidates are invited to apply online with an updated resume. Please indicate the below information in your resume:

• Education Background
• Work experience
• Current & Expected salary
• Reason(s) for leaving current/previous job
• Availability / Notice Period

We regret that only shortlisted candidates will be notified.

Thank you for applying!

We are one of the leading independent manufacturers of building chemical products in Europe based in Germany. We are expanding our operations in Singapore and are looking for Product Executive Engineer to join the team.

Main Duties:

• The key point of contact for customers: answering queries, offering product advice and application solutions as well as compilation and analysis of competitions. Duty includes various aspects of performance optimisation of product from development to sales return

Task & Responsibilities

• Prepares product reports by collecting and analysing competition products and market information.
• Provide technical support and product solutions to customers and attending to technical issues on site.
• Organise and lead product demo and trial mix for both lab and plant trials.
• Prepare technical data and technical reports.
• To conduct training/workshop for customers and understand their problems and identify solutions through the effective use of our products.
• Conduct product presentation to customers.
• Concrete design mix and admixture development and adjustment to meet customer’s requirement.
• Ensure the concrete lab is well maintained at all time. Ensure laboratory materials, tools, equipment and other assets are properly used and kept.
• Provide guidance support and oversight to product QC / QA protocol for Production plant.
• Key contact person with all testing lab and ensure all test reports are up to date.
• Developing product ideas based on customer interests, budgets and market research
• Analysing market and industry product trends
• Any other new tasks assigned

Requirements:

• Minimum 3 - 5 Years of relevant working experience in Construction/ Civil Engineering Industry.
• Excellent written and verbal communication skills
• Candidate must possess at least a ITE/Engineering in Diploma in Civil or Chemical Engineering will be an added advantage
• Excellent teamwork player
• Valid Class 3 driving License

Job Objective/s

Design and develop optoelectronics devices, including but not limited to FP lasers, DFB lasers, electro-absorption modulator/laser, photonics integrated circuits and their packaged modules, as well as photonics systems such as external cavity lasers to meet design goals and requirements.

To develop test set-ups and capabilities aligned to the company’s technology and product roadmap, and to integrate them with in-house manufacturing capabilities.

Duties and Responsibilities

▪ Primary responsibility is Design and develop the DFB/FP new products ,test methodologies, set-ups, and testing plans and procedures to characterize the optical, electrical, RF, and thermal performance of optoelectronic devices.

▪ Perform test and characterization runs to support the test requirements of New Product Innovation, New Requirement Engineering, Request For Customization, and Product Improvement projects.

▪ Perform waveguide and optical coupling tests of passive components, and electro-optical tests to characterize active optoelectronic devices and photonic integrated circuits.

▪ Analysis of measured test results together with correlation to design requirements and simulation results to iterate towards improvement in design and performance of the optoelectronic devices and packaged modules.

▪ Generate test reports with measurement results and detailed analyses in a timely manner.

▪ Work closely with the wafer fab, assembly and packaging, design, and product teams of both in-house and outsourced partners.

Qualification Guidelines

Minimum Education

• Degree or Post-graduate degree (MSc/MPhil/PhD/EngD or equivalent) in Optoelectronics/Photonics/Electronics/Electrical Engineering/Physics or similar.
• Training in semiconductor-based light-emitting optoelectronics is preferred.

Minimum Experience

• Minimum of 3 years’ working experience with technical background in optoelectronics, optical components, and photonic device systems and sub-systems.
• Proven working experience in the optoelectronics manufacturing industry.

Specific Knowledge / Skills

• Excellent written and verbal communication skills.
• Programming and scripting skills and computational literacy; e.g. C/C++, Python, MATLAB/Octave, etc.
• Proven organizational and multi-tasking skills.

Job Description:

• Conducting product research and sourcing new suppliers and vendors
• Request quotes and compare prices for maximum ROI.
• Track incoming inventory, delivery arrival time and note actual arrival time.
• Updating and Maintaining records of all Orders, Payments, and Received Stock
• Coordinating with the receiving team and follow up on receiving items.
• Establish Professional Relationship with Vendors and Suppliers
• Collaborate with financial team members on invoicing and other financial matters.

Job Requirements:

• Minimum Nitec in any field
• 1 to 3 years of relevant experience
• Knowledge and understanding of purchasing processes, policy and systems.
• Proficient computer skills, including Microsoft Office Suite (Words, Outlook and Excel
• Excellent verbal and written communication skills; able to negotiate and process contracts.
• Able to multitask, prioritize and manage time efficiently.
• Accurate and precise attention todetails
• Able to make decision in a fast-paced environment

Job Description & Requirements
The role of a Sales Support Executive / Coordinator / Admin is responsible for rendering all the after-sales support services to the customers. This includes processing of orders, preparing internal & external credit notes, payment collection, preparation of quotations, contracts, mailers, samples and coordination with other departments.

Specific Responsibilities
1. Responsible for taking customers’ orders via phone or email, input into system, print and sort the invoices.

2. Responsible to prepare internal & external credit notes.

3. Responsible for payment collection from customers.

4. Assist in the preparation of quotations / contracts / mailers / samples for sales team.

5. Assist point between customers and logistics department on all logistics matters.

6. Assist to check and coordinate on supply issues with warehouse, purchasing and production departments.

7. Maintain and replenish sales samples drawers.

8. Attend to office deliveries/mails as we do not have receptionist.

9. Assist in the preparation of the monthly report on sales performances to the management for sales performance evaluation when required.

10. Any other area of responsibilities that the company deems necessary.

Competency Requirements
1. GCE ‘O’ level.
2. NAV/Microsoft Dynamics 365 Business Central will be an added advantage.
3. Communication skills for coordination and customer service.

Working Hours
Monday - Friday : 8 30am - 5 45pm (1 Hour Break)
Saturday: 8 30am - 2 30pm (1 Saturday Shift Every 4 Weeks)

Responsibilities

• Thorough review of submissions and analysis, accurate and timely processing of monthly payroll of more than one thousand employees in accordance with company policies and local regulatory standards
• Accurate and timely filing and payment of statutory CPF to CPFB
• Submission of employees' IR21 & NS Claims in a timely manner
• Payroll/tax/government grant related journal entries and accruals
• Annual employee stock / income tax filings
• Internal and external audits for payroll related accounts
• Manage government grants
• Assist in implementation of improvements/enhancements, including working independently with all stakeholders, and achieve high levels of efficiency, accuracy and compliance
• Ability to maintain the confidentiality and sensitivity of all employee related information
• Ability to work independently and to meet tight deadlines while maintaining a high level of accuracy
• Assist with adjustments in Timesoft

Requirements

• Relevant Diploma/Degree qualification
• At least 3 years of proven payroll experience in a large organisation
• Experience in Timesoft Payroll Module is a plus
• Excellent in Excel
• A strong team player, meticulous, detail-oriented and organized
• A multi-tasker with self-motivation and integrity

Job Descriptions

• Transport staff from point A to B within Changi Airport and Airline House.
• Responsible for the safety of passengers and adhere to Airport driving regulations.
• Maintaining cleanliness of the vehicle.
• Ensuring proper vehicle maintenance, nobserving safety and traffic rule.

Job Requirements:

• Possess a valid class 3 license with 0 demerit point
• Possess a valid ADP License will be added advantage

Job Description:

• Conduct Classroom documentation training
• Conduct OJT & assessment
• Develop Training Syllabus and Training Assessment
• Develop Training Plan and OJT Log

Requirements:

• Professional Certificate/NiTEC, Diploma
• Train the Trainer qualification will be an advantage
• 1 to 2 years of aviation experience
• Aircraft Technician with no prior trainer experience are welcome to apply

• Implement Plant-Wide Automation, Process Flow and Workplace Layout.
• Manage Automation Line and Equipment.
• Provide technical support to production line and implement technical and maintenance procedures.
• Design of Layout, Mechanical Parts, Jigs and Fixtures using Solid Works.
• PLC programming on Omron NJ series or other brand. Lead & direct technicians on operation & trouble shoot of automation line & equipments.
• Documents & file process changes, start up forms, PM schedules, trouble shooting & service records, etc.
• Leads & drives Engineering changes & improvement projects with internal & external customers.
• Manages equipment yield, cycle time & output of production line.
• Manage automation and equipment spare parts.
• Perform other tasks as assigned by the supervisor.

Requirements

Education

• Diploma / Degree in Engineering.

Experience

• Minimum 2 years’ of relevant working experience.

Skills

• PLC programming on Omron NJ series or other brand.
• Solid Works.
• Problem Solving skill.
• Critical Thinking and Coaching Skills.

Job Description

• Inspect and repair passenger seats, galleys, and lavatories and maintain aircraft conditions
• Install cabin interior components into commercial aircraft, including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.
• Maintain luggage storage area in a neat and organized manner
• Maintain inventory items required for handling the cleaning activities
• Maintain the quality of the aircraft interiors on the operated fleet
• Maintain the interior and exterior cleaning standards on the operating fleet
• Perform other duties as assigned by your superior

Job Requirements

• Minimum Higher Nitec or Diploma in Engineering/Aviation.
• No working experience is needed
• Able to communicate effectively verbally in writing in standard English.
• Ability to perform tasks in high-noise areas and work at height
• Able to work rotating shifts, including weekends and public holidays.
• Candidate must attend a 6-month Cabin Trainee Technician course (including On the Job Training) with assessment. Only those who pass the assessment will be offered employment for the role.

Job Responsibilities:

1. Process Optimization: Analyze and optimize plastics extrusion processes to meet product quality and consistency. Implement changes to enhance efficiency and productivity.
2. Quality Assurance: Develop and implement quality control measures to ensure final products meet or exceed industry standards. Collaborate with cross-functional teams to resolve quality-related challenges.
3. Equipment Management: Oversee and maintain extrusion equipment, ensuring proper functionality and addressing any issues promptly.
4. Data Analysis & Documentation: Collect and analyze process data to identify trends, variations, and areas for improvement. Maintain accurate and up-to-date documentation related to process parameters, equipment settings, and quality control measures.

Requirements:

1. Diploma or bachelor’s degree in chemical or plastics related field.
2. Experience in plastics extrusion processes, preferably in manufacturing environment would be an added advantage.
3. Strong knowledge of extrusion equipment, materials, and related technologies.
4. Excellent problem-solving and troubleshooting skills.
5. Effective communication skills and ability to work collaboratively in a team.

Responsibilities:

• Responsible for the maintenance and troubleshooting of electrical systems.
• Installation and commissioning of new electrical equipment.
• Planning and implementation of upgrades and modifications to existing electrical systems and equipment.
• Ensuring that all electrical systems and equipment comply with relevant safety standards and regulations.
• Conducting regular inspections and implementing corrective/preventive maintenance actions as necessary.
• Maintaining documentation related to maintenance and facilities.
• Identifying opportunities for continuous improvement.
• Perform ad-hoc activities and support as required by superiors.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalent qualification with computer literacy.
• Minimum 2 to 3 years of experience in a manufacturing setting.
• Experience with electrical installations and maintenance.
• Preferably specializing in Maintenance/Repair (Facilities, Equipment and Machinery).
• Knowledge of PLC control, PLC troubleshooting and modification will be an advantage.
• Hands-on electrical repair and troubleshooting experience is a must.
• Good commumication skills to foster teamwork and know-how exchange.