Job Description

• Repair of non-motorised equipment such as maintenance steps, hydraulic carts, nitrogen carts, etc.
• Perform preventive and corrective maintenance in accordance with approved documents
• Ensure proper and accurate details filled up and signed off on job card and task sheets upon completion of work
• Ensure equipment is in working/serviceable condition before releasing to user
• Able to read and understand engineering schematic drawings and manuals
• Other duties as assigned

Job requirement

• Candidate must possess minimum Professional Certificate/NiTEC in Engineering (Mechanical/Automotive) or equivalent
• At least 1Years of working experience on repair of mechanical and/or hydraulic equipment
• Good Hands-on skills

· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

The Project Engineer is responsible for ensuring proper adoption of resource, quality and risk standards as well as managing project profit during the project lifecycle. He/She coordinates all administrative processes related to a project eg reports, claims, payment of invoices, including the final project handover documentation. He/She typically comes from an engineering industry/background and is able to identify and report project-related issues as well as suggests changes related to quality, risk and administrative processes.

He/She has good communication, customer management and negotiation skills for engaging with both internal and external parties to coordinate project activities between organisational departments and teams during the various phases of a project, as well as managing sub-contractors to ensure they are integrated into the project and adhering to technical requirements.

RESPONSIBILITIES

• Be responsible for the planning, scheduling, controlling and coordinating of building services related works in terms of preventive / breakdown / A&A Works
• To lead a team of supervisors & skilled workers to carry out their works accurately and timely and to ensure that works on site are carried out according to client requirements
• Liaise and hold meetings with clients, Managing Agent & Sub contractor to ensure that all requirements by clients and relevant authorities are adhered
• Monitor, track, and provide timely project progress reports to the management
• Good knowledge and experienced in building related works such as civil engineering, structural, architectural, building repair, carpentry, partition, A&A, renovation, plumbing works etc

JOB REQUIREMENTS

• Candidate must possess at least Diploma/ Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Building Services Engineering, Project and Facilities Management or equivalent.
• Diploma holders with relevant work experience are welcome to apply
• At least 3 Year(s) of working experience in facilities/ building maintenance industry.
• Preferably Executive specialized in Engineering - Civil/Construction/Building Services or equivalent
• Class 3 driving licence (Good to have)
• Must be self-driven & motivated to perform and deliver service excellence

We are looking for project engineer (building) based in Singapore office, if you are interested in becoming part of our SH family, please submit your resume and experience via the submit button below.

Our company is in need of Mechanical Engineer cum Procurement Officer for construction industry.

Criterias are:
1. Healthy
2. In-charge of workshop vehicle maintenance and repairs
3. Warehouse duties
4. Preparation of Delivery Orders (DO), Invoices and Quotations

Working Hours:

Mon-Sat: 8am to 6pm

Job Description & Requirements

- Assigned to Business Development Manager as their Sales Support

- Provide RFQ, source rate with airline and oversea agents

- Daily shipping co-ordination of AIR/SEA/Cross Border /3RD PARTY shipments

- To handle billing advise and recoveries

- Administrative support (filing, circulation, preparation/generate report and etc.)

- To undertake new projects/new assignment given from time to time

- To represent sales department in various taskforce/committee

- Other duties as assigned by the Department Manager

Job Requirement

• Good interpersonal and communication skills
• Strong ownership and sense of responsibility
• Ability to manage multiple tasks efficiently
• Excel skills will be an advantage

Benefits

• Good structured career progression
• Comprehensive training will be provided
• Monday – Friday (5 days standard Office hour)

WELCOME TO SITA

SITA is the leading specialist in air transport communications and information technology. We don’t just connect the global aviation industry, we apply decades of experience and expertise to address almost every core business, operational, baggage, and passenger process in air transport. As an organization, we cover 95% of all international air travel destinations and work with over 2,800 air transport and government customers in every corner of the globe. Immerse yourself in the dynamic world of technology while embracing our collaborative, and inclusive culture.

Ready to redefine air travel? The journey starts here, with you at SITA.

ABOUT THE ROLE & TEAM:

WHAT YOU WILL DO:

• Provide Service Operations support to internal and external customers in accordance with the terms of the customer contract and Service Level Agreements (SLAs)
• Ensure the correct functioning and maintenance of all internal and external systems and products serviced by Service Operations
• When required, act as the customer SPOC and coordinate the scheduling of intervention with Customer's, internal resolver groups, and the Service Desk ensuring the highest level of customer services and communications are maintained to resolve the fault and incident within the prescribed SLA.
• Carry out incident and problem management support to the highest standards and co-ordinate the resolution with the appropriate resolver groups
• Ensure shortest restoral times possible, initiating the timely escalations to specialized resolver groups inside and outside SITA, according to the customer contracts, SLAs and monitoring requirements
• To ensure the Service Operations team adheres to the highest working standards for all incidents and problems by providing guidance, support and direct management.
• Proactively detect problems related to service and infrastructure operations and delivery services, conduct diagnostics and provide service request ownership to ensure resolution of customer problems
• Support the senior team members in the management, reporting, and coordination of day-day tasks during the absence of the Lead Engineer
• Adhere to installation guidelines and industry best practices in order to deliver quality service and infrastructure operations
• Use the appropriate tools and equipment to perform the installation, intervention, and repairs in accordance with Service Operations and Delivery guidelines and instructions where provided
• Report and escalate to the next level those problems which cannot be fixed
• Carry out preventive and proactive maintenance of equipment and monitoring of systems and services in accordance with agreed schedules and customer expectations
• Perform Change Management, Configurations, Design and Implementation of the supported Product & Systems
• Manage local suppliers in the provision of services for the SITA Service Operations centres and report on services provided to management.
• Conducts the analysis, definition, documentation and testing of application & systems enhancements
• To provide onsite support to Users during the cutover of the services
• Continuously identify and document lessons learnt, known errors and operational knowledge for improved services
• When/where required, be contactable for escalations and support, on and on-call standby basis
• When/where required, perform assigned tasks on 12 x 7 shifts basis.

EXPERIENCE:

• Degree or equivalent Diploma / Certificate in Computer Science, Electronic Engineering or equivalent
• Minimum 8 years experience in the network, and/or application/system support domain.
• Must have dealt directly with external customers delivering to SLAs.
• Exposure to ITIL and IT/network components and principles
• Demonstrated maturity in handling complex customer issues and demanding customers
• Ability to coach new joiners and to facilitate their integration into the team
• Knowledge of Airline and CAA customers use of ACM applications
• Ability to organize the activity of a team and to take ownership of issues until resolution

Reports To:

Supervisor / Manager - Aircraft Maintenance Services

Job Summary:

The Team Leader is responsible for overseeing and coordinating the replacement of carpets, galley mats, and lavatory mats on aircraft. This role involves ensuring quality service delivery, maintaining adherence to safety and compliance standards, and managing the performance of the assigned team members.

Key Responsibilities:

Team Leadership

· Plan, organize, and oversee the execution of carpet, galley, and lavatory mat replacement tasks in alignment with maintenance schedules.

· Supervise the team to ensure tasks are completed efficiently and meet airline quality standards.

· Conduct pre- and post-service inspections to ensure replacements are correctly installed and meet safety regulations.

Team Management

· Assign tasks to team members based on individual skills and project needs.

· Provide on-site guidance, support, and training to team members to improve their technical skills and adherence to procedures.

· Monitor team performance and provide constructive feedback to enhance service delivery.

· Safety and Compliance with aviation standard.

· Ensure all work is performed in accordance with safety protocols and aviation regulations.

· Maintain proper handling and disposal of removed materials, adhering to environmental standards.

· Verify the use of appropriate tools and equipment for mat and carpet replacement tasks.

· Coordination and Reporting

· Collaborate with maintenance planners and airline representatives to align services with operational requirements.

· Report progress, challenges, and service completions to supervisors or managers.

· Maintain accurate documentation of work performed, including timesheets and quality control reports.

· Ensure sufficient availability of replacement materials and tools.

Educational Requirements

· Diploma or relevant certification in aircraft maintenance, operations, or a related field.

· Minimum 2–3 years of experience in aircraft cabin maintenance or related services.

· Prior experience in a supervisory or team leader role is preferred.

· Skills and Abilities

· Strong technical knowledge of carpet and mat replacement procedures.

· Excellent leadership, communication, and interpersonal skills.

· Ability to work under pressure and meet tight deadlines.

· Proficiency in reporting and documentation tools.

· Certifications

· Relevant aviation safety or maintenance certifications are an advantage.

Work Environment:

· Work in hangars, on aircraft, and occasionally outdoors in varying conditions.

· Flexible to work shifts, weekends, and holidays as needed.

·

Job Description

• Repair of non-motorised equipment such as maintenance steps, hydraulic carts, nitrogen carts, etc.
• Perform preventive and corrective maintenance in accordance with approved documents
• Ensure proper and accurate details filled up and signed off on job card and task sheets upon completion of work
• Ensure equipment is in working/serviceable condition before releasing to user
• Able to read and understand engineering schematic drawings and manuals
• Other duties as assigned

Job requirement

• Candidate must possess minimum Professional Certificate/NiTEC in Engineering (Mechanical/Automotive) or equivalent
• At least 2 Years of working experience on repair of mechanical and/or hydraulic equipment
• Comfortable with shift arrangement

About the role

• Two-year contract
• Reports to Instrumentation Engineer and Senior Instrumentation Engineer;
• Maintain and implement ISO 9001, ISO 14001 & OHSAS 18001/ISO 45001 Management System effectively;
• Follow Instrumentation Engineer’s arrangement in conduct field monitoring tasks;
• Able to complete given task within permitted working hours;
• Maintain and protect the monitoring equipment diligently;
• Follow Instrumentation Engineer’s instruction in carry out adhoc work such as help out in digging manual trialpit, instruments installation.
• Implementation of the highest practicable standards of Health, Safety and Environmental Performance and maintenance of the Management Systems to ensure compliance with appropriate International Standards;
• Follow business management system and corporate compliance procedure;

About you

• Degree in Civil Engineering
• Fresh graduates are welcome
• Able to withstand long hours outdoors
• Ability to exercise job prioritization
• Team player
• Effective communication skills
• Results driven and highly motivated
• Able to deliver under pressure

What we offer

• Competitive salary with Annual Wage Supplement
• Generous paid-leave
• Career & training opportunities (international opportunities possible)
• Company shuttle from various pick-up at MRT stations across Singapore
• Collective health insurance and outpatient benefits;
• Employee Assistance Programme (EAP) to provide help when you need extra support.
• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Job Responsibilities:

• Read telex and action accordingly.
• Inform apron of aircraft changes, edit in CRO Editor and send CALL BACK to all concerned.
• Ensure requests for SIA stretcher/ Supplementary Oxygen kit and update in stretcher/ Supplementary Oxygen Kit chart-update the systems.
• Update flight observer chart and fax to IGO and provide a copy to MAINTROL.
• Any last-minute aircraft change less than 2 hours to STD, CRO will call refuellers directly and inform of aircraft change.
• Prepare SQ and Scoot (including Line Station) Delay reports.

Job Requirement:

• Minimum ITE Certificate in any discipline
• Familiar with Microsoft excel and SAP
• Experience in performing coordination, data entry, and generating reports
• Able to quick response to any last minute’s aircraft changes and react promptly
• Possess good communication skills
• Able to work under pressure
• Comfortable with rotating shift (12hrs Morning & Night) pattern based on 2 days’ work and follow by 2 days off work arrangement.

Job Responsibilities:

• Oversee the storage, inventory, and distribution of parts, and kits for base maintenance activities.
• Coordinate with Base hangar Ops personnel to understand kitting requirements and prioritize stock availability.
• Ensure timely issuance and return of spare parts/kitting kit to avoid delays in aircraft maintenance schedules.
• Monitor inventory levels and initiate procurement requests to prevent shortages.
• Conduct regular inventory checks and audits to ensure accuracy and minimize discrepancies on the report.
• Implement and maintain efficient kitting management systems.
• Lead and supervise the kitting store team, ensuring proper training and adherence to company policies.
• Assign tasks, monitor performance, and provide feedback to improve efficiency and productivity.
• Manage shift schedules to always ensure adequate staffing.
• Ensure all activities comply with regulatory requirements and safety standards in the aviation industry.
• Maintain records of spares and equipment usage to meet audit and compliance requirements.
• Promote a culture of safety and adherence to hangar activities.
• Collaborate with warehousing, logistics team, and Base hangar Ops teams to streamline kitting processes.
• Provide daily reports on kitting inventory status, shortages, and operational issues.
• Act as the primary point of contact for kitting-related concerns in the hangar.
• Identify and implement process improvements to enhance kitting operations.
• Provide monthly kitting services report for customer to review.

Job Requirements:

• Diploma / Degree in Logistics, Supply Chain Management, Aviation Management, or a related field. with min. 3 years of experience in inventory or store management, preferably in aviation or a related industry.
• Knowledge of aviation regulations, safety standards, and compliance requirements.
• Experience with inventory management software(SAP) and systems.
• Strong leadership and team management skills.
• Proficient in data analysis and reporting.
• Effective communication and coordination skills.
• Detail-oriented with a commitment to accuracy and efficiency.
• May involve shift work to support 24/7 maintenance operations.
• Adherence to strict safety protocols and use of personal protective equipment (PPE).

Job Description

Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service manufacturing equipment for the semiconductor and display industries. Our innovations are at the foundation of the technology that transforms every part of our lives. We offer an exciting place to grow and learn alongside some of the best people you’ll ever meet. Join us to Make Possible a Better Future.

We are currently seeking for an experienced and passionate Process Engineer (R&D) to join our Applied Materials - NUS Advanced Materials Corporate Lab. The Advanced Materials Corporate Lab combines Applied's leading expertise in materials engineering and semiconductor technologies with NUS' world-class and multi-disciplinary R&D capabilities that span across applied chemistry, materials science and microelectronics process engineering. Apply now if you fit the description below!

​Key Responsibilities

• Devise precursor and deposition strategies and associated intellectual property. Design chemical processes to find new innovative ways to create, remove or clean thin films.
• Prepare the project plan for semiconductor films growth and execute project deliverables from planning to implementation. Be responsible for project milestones and deliverables within project cost.
• Engage with business unit teams and customers to initiate and complete projects. Own the technical development aspects in the pursuit of the project goals.
• Trouble shoot for root causes to project developments obstacles and engage business unit and broader team members implementing proposed solutions to the problems.
• Prioritize the activities to achieve on-time and within budget performance objectives for the project.

Requirements

• PhD in Chemistry, Chemical Engineering and Materials Science
• Have good working experience in ALD, CVD, MOCVD, PECVD film depositions
• Have working experience with novel thin film growth and characterizations
• Have good understanding of vacuum science and general process and hardware trouble shooting of ALD/CVD platforms
• Have basic working knowledge of chemistry and chemical reactions at interfaces

Work Location

• Applied Materials - NUS Advanced Materials Corporate Lab @E6

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

· Responsible in providing day-to-day engineering support to manufacturing operations to achieve key business objectives involving quality and productivity.

· Provide support for engineering conception phase all the way to implementation and operations support.

· Work closely with cross functional teams to provide innovative engineering solutions for continue process improvements.

· Active involvement in projects relating to design and implementation of manufacturing-related equipment, such as automated optical inspection units.

· Assist in developing, updating and revising manufacturing documentation in accordance with company policies, relevant standards, and regulations established by regulated agencies (e.g. ISO9001/14001/13485).

· Assist in initiating, evaluating and implementing engineering change order.

· Assist in anyalzing and determining conformance of materials and parts manufactured.

· Assist in monitoring and improving productivity metrics established as company’s goal.

· Participate in development and validation activities for R&D products.

Knowledge in Delta PLC programming and COBOT.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

1. Candidates with project experience in commercial office fit-outs are highly desirable.
2. A minimum of 3 years of relevant work experience is required.
3. Fluent in English, both spoken and written is essential.
4. Basic understanding of the design and calculation of HVAC systems is necessary.
5. Assisting with tender calculations, preparing presentation materials for tenders, and participating in tender interviews.
6. Must be a team player, capable of effectively collaborating and communicating with clients, suppliers, contractors, and team members throughout the project.
7. Monitor project costing and progress payment, variation works and cost control.
8. Proficiency in troubleshooting and resolving technical issues that arise during projects is required.
9. Candidates should be able to manage multiple projects simultaneously and perform well under pressure

Location: Singapore, Changi North Rise
Working Hours: 5 days work week
Benefits:

• Lunch provided
• 2-way shuttle bus services available at Ang Mo Kio & Bedok MRT stations
• Medical Benefits
• Leave benefits according to MOM guidelines

Responsibilities:

• Coordinate and schedule installations, removals, relocations, and periodic maintenance of machines and equipment.
• Submit necessary documents through online portals and handle any follow-up actions.
• Communicate with clients, vendors, and internal teams via email and phone to provide timely updates on service requests.
• Manage paperwork related to service orders, maintenance records, and other administrative tasks.
• Track and report on service schedules, ensuring timely completion of tasks.

Requirements:

• No prior experience required; training will be provided.
• Basic computer skills, including proficiency in Microsoft Excel.
• Strong communication skills (both written and verbal).
• Good organizational skills and attention to detail.
• Ability to work independently and manage multiple tasks in a fast-paced environment.
• A proactive and customer-focused attitude.

How to Apply:
Interested candidates are invited to submit their resumes and cover letters to [email protected]

1. JOB DESCRIPTION

Job Title

Technician/Engineer (Contract/Perm)

Occupation

Technician/Engineer

Job Description & Requirements

Job Highlights

• 3 months Completion Bonus on 2 years renewable contract
• Mon - Fri 8.30am to 5.30pm. Training provided
• Transport and Mobile Allowance + OT + Medical reimbursement

Job Description

2 years renewable contract with 3 months completion bonus. 5 days week + OT + Transport allowance + Mobile allowance. Responsible for facility hook-up, installation and start-up process of semiconductor equipment.

Responsibilities

• Perform installation work according to guidelines and procedures
• Perform safe and proper move-in according to procedures
• Tally and check the conditions of parts and accessories
• Support engineering activities
• Ensure good EHS compliance

Requirements

• Must possess Min. Certificate / Diploma in Electrical / Mechanical / Electronic Engineering or equivalent
• Preferred bilingual in English and Chinese to handle Chinese speaking customers’ technical enquires & conduct trouble shooting based on customers’ feedback
• Cleanroom environment
• Able to start immediately preferred

Job Objective/s

To be able to develop and maintain engineering and production software platforms. Capable of using C#, MySQL, Google App Script, Javascript, Python languages for developments & modifications. Good understanding of the manufacturing workflow environment type of software requirements. Design and build structured database, Data Visualization, data warehouse, data pollings and AI algorithms fitting our use

Duties and Responsibilities

- Development, administration and maintenance of developed software applications such as DMES, G-suite based applications, and engineering tools like for yield analysis softwares and other softwares
- Develop customized solution of MES system for ATP production; extension of MES system from Fab.

- Analyse Data and create Data Visualization using TIBCO software or related software or dashboards
- Lead cross functional team meetings for software solutions and improvements.

- Develop and maintain software programs that improve efficiency and productivity.
- Write, review user requirements, documentation, test plans and deployment of developed software.
- Prepare User’s Manual and Troubleshooting guide
- Qualify User Acceptance Tests (UAT) of developed softwares and modification before to release

- To follow project management approach for software development & progression

- Capable to do systems integration software

Minimum Education

Bachelor’s Degree

Minimum Experience

Minimum 5 years’ working experience with software development.

Specific Knowledge / Skills

• Ability to develop engineering software using industry standard coding languages such as C#, Python, MySQL Query.
• Knowledge and experience on WPF, Google App Script, MongoDB and JavaScript will be added advantage.

Job Description

• Prepare work packages and ensure spare availability prior to work commencement.
• Prepare work packages and provide support to technical crew.
• Liaise with technical crew and various departments to ensure smooth and timely completion of planned tasks.
• Perform data input and analysis.
• Plan and track monthly programs for completion.
• Answer customer queries.
• Any other duties required\

Job Requirements

• Higher Nitec / Diploma in Aviation Managamemt / Engineering Equivalent
• No experience is required, Full training will be provided
• Knowledge of SAP will be an advantage
• Must be comfortable with 12 hours rotating shift work arrangement

Key Responsibilities

• Resolves complex field process issues utilizing systematic troubleshooting methodology generally involving multiple processes. Create a mechanism to communicate issues, track progress and pull resources from multiple business unit and/or functions. Communicates learning's from this portion to rest-of-world to strengthen the product packages.
• Assists account teams in managing the customer account to enhance customer satisfaction and increase AMAT’s product and technical reputation.
• Participates on multifunctional design teams comprised of internal, external and/or matrixed headcount to complete projects. Provides technical input to team members to achieve project goals.
• Serves as the customer expert across a broad range of products. Plays a key role in defining product strategy and identifying gaps. Provides feedback to business unit heads on process and hardware improvements to meet customer requirements.
• Takes the lead in positioning new technologies to customers utilizing technical information from business unit. Interfaces with customers at key development and manufacturing sites to form strategic partnerships to evaluate new and emerging technologies and oversees joint development activities or beta-site testing programs. Makes executive level presentations.

Functional Knowledge

• Demonstrates broad and comprehensive understanding of different systems, theories and practices

Business Expertise

• Applies broad industry and commercial awareness to drive financial and operational performance across business unit, department or sub-functions

Leadership

• Leads through subordinates to execute segment/functional business plans and contributes to the development of segment/functional strategy

Problem Solving

• Directs the resolution of highly complex or unusual business problems applying advanced analytical thought and judgment.

Impact

• Guided by segment/functional strategy, impacts results of a department, business unit or sub-function or facilitates the work done by other segments/functions by providing support to impact the business

Interpersonal Skills

• Negotiates and influences the opinions of others at the senior executive level and in external organizations; exercises sensitivity to the audience
• Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

Job Description

Key Responsibilities

• Will prepare project plan and coordinates the attainment of project deliverables from planning to implementation. Maintains matrix for process improvements
• Will drive project deliverables and task details by through the use reports, tracking charts and, checklists.
• Aligns the activities of resources internal to the business unit to achieve on-time and within budget performance objectives for the project.
• Monitors, and reports to the business unit on project's cost performance.
• Will participate on intra business unit design teams to complete projects. Will contribute to the team's technical development in the pursuit of the team's project goals.
• Will research causes to project obstacles and assist in implementing solutions for resolution.

Requirements

• Engineering education qualification and working experiences
• Project and program management experiences
• Experience in product development from C&F to customer acceptance would be highly desirable
• Accommodating to different time zones
• Excellent internal and external stakeholder management

Working Location

• Fusionopolis Two

1. Responsible to MIS Manager for IT infrastructure setup, maintenance, and operations.
2. Has Programming Proficiency in database management systems (e.g. MSSQL, Visual Basics 6.0 & Active Server Pages ASP).
3. Strong Knowledge of Information Security Protocols.
4. Experience in ERP systems for CRM Support.
5. Handle IT project and system implementation which involve gathering information designing and planning. Conduct User acceptance test and provide user training.
6. Manage and liaise with external system vendors related to MIS department when necessary.
7. Provide advice and recommendations to management on proofs and techniques for improved work operations related to customized labels direct USB printing to Seagull Bartender Printer (no Crystal Report).
8. Handle basic hardware troubleshoot, system backup and software support.
9. Assist the MIS Manager in any ad hoc activities related to the MIS department.
10. To compliance with laws and codes pertaining labor and ethics via annual training.
11. Knowledge in Network Protocol environment

Education:

• Diploma or Degree in Computer Science, Information Technology, or any related discipline.
• Equivalent qualifications or certifications in relevant IT/ERP systems support are also considered.

Job Description

Key Responsibilities

Performs all CMP standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information